dtecter e nivea - audin€¦ · page 1 / 8 bs dtecter e nivea ice tecnie e1.01 avantages...
TRANSCRIPT
Page 1 / 8www.baumer.com
LBFSDétecteur de niveau
FR/1
6101
2
Des
sins
et c
arac
téris
tique
s so
us ré
serv
e de
mod
ifica
tion
sans
pré
avis
Fiche technique E21.01
Avantages particuliers�� Parties en contact avec le fluide en acier inoxydable et PEEK�� Design compact�� Point de commutation précis sans exigence d’étalonnage�� Température de processus -40 ... 115 °C �� Mesure de fluides avec des valeurs DK >1,5 (DK = directrice constant)
�� Témoin de commutation LED �� Sans maintenance�� Adapté à la séparation des milieux�� Configurable par FlexProgrammer 9701�� Autorisation ATEX pour gaz et poussière�� WHG (en instance)
Données techniques
CapteurSignal émis 100...180 MHZRaccords process Se reporter aux dessins cotésMatériau isolant PEEKDonnées mécaniques
Boîtier Acier inoxydableTemp. ambiante -40...85 °CTemp. de processus -40...115 °CClasse de protection IP67 (CEI 529)Pression du fluide Max. 100 barVibrations CEI 60068-2-6, GL test2Installation Toute positionRaccordements électriques
Câble 5 mètres, 4 filsConnecteur M12 Plastique ou acier inoxydable 304Autres données électriques
Alimentation 12...30 V CC, 35 mA max.Amortissement 0...10 sec.Temps de mise sous tension <2 sec.Hystérésis ± 1 mmReproductibilité ± 1 mmTemps de réaction 0.1 sec. (100 mS)Mise au rebut du produit et de l’emballage
Selon les lois nationales en vigueur ou par retour chez BaumerDonnées CEM et emballage
Immunité EN 61326Émission EN 61326Données CEM et emballage
Inductivité interne Li –< 10 μHCapacité interne Ci –< 43 nFDonnées de barrière U –< 30 VDC ; I < 0.1 A ; P < 0.75 W
Autorisation Ex ia IIC T5, ATEX II 1GPlage d'alimentation 24...30 VDCClasse de température T1...T4: -40 < Tamb < 85 °C
T1...T5: -40 < Tamb < 74 °C
Autorisation Ex ta IIIC T100 Da, ATEX II 1DPlage d'alimentation 12...30 VDCClasse de température T100 °C: -40 < Tamb < 85 °CAutorisation Ex nA II T5, ATEX II 3G
Plage d'alimentation 12,5...30 VDCClasse de température T1...T5: -40 < Tamb < 85 °CSortie
Sortie (active) Max. 20 mA, protection contre les courts-circuits et températures élevées
Type de sortie PNP or NPNPolarité de sortie NO and NCActif « haut » PNP
(VDC -1.5V) ± 0.5V ; Rload 10 kOhmActif « bas » NPN
(-VDC +1.5V) ± 0.5V ; Rload 10 kOhmCourant de fuite à l'arrêt ± 100μA Max.Réglages d’usine
Amortissement 0,1 sec.Autorisations/conformités
Autorisations/ conformités
DNV Marine Approval EN 50155 Railway 3A, EHEDG, FDA, WHG (en instance)
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
Page 2 / 8www.baumer.com
Page 2 Design and specifications subject to change without notice
Data sheet E21.01www.baumer.com/process
Technical Data
SensorRadiated signal 100...180 MHZ
Process connection Refer to dimensional drawings
Insulating material PEEK
Mechanical dataHousing Stainless Steel
Amb. temperature -40...85°C
Process temperature -40...115°C
Protection class IP67 (IEC 529)
Media pressure Max. 100 bar
Vibrations IEC 60068-2-6, GL test2
Installation Any position
Electrical connectionCable 5 meter, 4 wire
Plug M12 Plastic
Other electrical dataPower supply 12...30 VDC, 35 mA max.
Damping 0...10 sec.
Power-up time <2 sec.
Hysteresis ± 1 mm
Repeatability ± 1 mm
Reaction time 0.2 sec. typ.
Disposal of product and packingAccording to national laws or by returning to Baumer
EMC dataImmunity EN 61326
Emission EN 61326
Dimensional Drawings
Ex data (ia)Internal inductivity Li < 10 µH
Internal capacity Ci < 43 nF
Barrier data U < 30 VDC ; I < 0.1 A ; P < 0.75 W
Approval Ex ia IIC T5, ATEX II 1GSupply range 24...30 VDC
Temperature class T1...T4: -40 < Tamb < 85°C
T1...T5: -40 < Tamb < 74°C
Approval Ex ta IIIC T100 Da, ATEX II 1DSupply range 12...30 VDC
Temperature class T100°C: -40 < Tamb < 85°C
Approval Ex nA II T5, ATEX II 3GSupply range 12...30 VDC
Temperature class T1...T5: -40 < Tamb < 85°C
OutputOutput (active) Max. 20 mA, short-circuit and
high-temperature protected
Output type PNP or NPN
Output polarity NO and NC
Active “High” PNP (VDC -1.5V) ± 0.5V ; Rload 10 kOhm
Active “Low” NPN (-VDC +1.5V) ± 0.5V ; Rload 10 kOhm
Off leak current ± 100µA Max.
Factory SettingsMeasure DK value > 2
Damping 0.1 sec.
LBFS xx1x x LBFS xx2x x LBFS xx3x x
R
74 - 03
NPT
40
17.00
65
87
1
4
2
3
Page 3 Design and specifications subject to change without notice
Data sheet E21.01www.baumer.com/process
Electrical Connection
M12 plug Cable Function1 Brown + VDC2 White Normally Closed 3 Blue - VDC4 Black Normally Open
Dimensional Drawings
LBFS xx4x x LBFS xx5x x
G½” hygienic
NV22 mm
97
48
G½” A ISO288/1
9768
Ø27
NV24 mm
G½” revers assembly
M18x1
LBFS xx6x x LBFS xx7x x
R
74 - 03
NPT
40
17.00
65
87
1
4
2
3
Page 3 Design and specifications subject to change without notice
Data sheet E21.01www.baumer.com/process
Electrical Connection
M12 plug Cable Function1 Brown + VDC2 White Normally Closed 3 Blue - VDC4 Black Normally Open
Dimensional Drawings
LBFS xx4x x LBFS xx5x x
G½” hygienic
NV22 mm
97
48
G½” A ISO288/1
9768
Ø27
NV24 mm
G½” revers assembly
M18x1
LBFS xx6x x LBFS xx7x x
R
74 - 03
NPT
40
17.00
65
87
1
4
2
3
Page 3 Design and specifications subject to change without notice
Data sheet E21.01www.baumer.com/process
Electrical Connection
M12 plug Cable Function1 Brown + VDC2 White Normally Closed 3 Blue - VDC4 Black Normally Open
Dimensional Drawings
LBFS xx4x x LBFS xx5x x
G½” hygienic
NV22 mm
97
48
G½” A ISO288/1
9768
Ø27
NV24 mm
G½” revers assembly
M18x1
LBFS xx6x x LBFS xx7x x
R
74 - 03
NPT
40
17.00
65
87
1
4
2
3
Page 3 Design and specifications subject to change without notice
Data sheet E21.01www.baumer.com/process
Electrical Connection
M12 plug Cable Function1 Brown + VDC2 White Normally Closed 3 Blue - VDC4 Black Normally Open
Dimensional Drawings
LBFS xx4x x LBFS xx5x x
G½” hygienic
NV22 mm
97
48
G½” A ISO288/1
9768
Ø27
NV24 mm
G½” revers assembly
M18x1
LBFS xx6x x LBFS xx7x x
G½" hygienegerecht G½" umgekehrte Montage
FR/1
6101
2
Des
sins
et c
arac
téris
tique
s so
us ré
serv
e de
mod
ifica
tion
sans
pré
avis
Fiche technique E21.01
LBFSDétecteur de niveau
DescriptionLe détecteur de niveau LBFS est conçu pour détecter des niveaux dans des réservoirs, pour la séparation des milieux et pour offrir une détection de tuyau vide ou une protection contre la marche à sec des pompes.Un signal à balayage haute fréquence est émis de la pointe du cap-teur vers le réservoir. Le fluide fait fonction de condensateur virtuel et, associé à une bobine au sein de la tête de capteur, il forme un circuit générant le signal de point de commutation. Cette capacité virtuelle dépend de la valeur diélectrique εR (constante diélectrique) du fluide.Il y a deux signaux de sortie disponibles : contact à ouverture (NO) et contact à fermeture (NC) Le FlexProgrammer 9701 permet d’amortir le signal de sortie en cas de niveau fluctuant du fluide, par exemple, lors du remplissage du réservoir. En outre, les signaux de sortie NO et NC peuvent être inversés.
La détection est précise et n’est en rien affectée par la position de montage dans le réservoir. Le logiciel Flex permet une compensation pour la mousse, les bulles ainsi que pour les produits condensés ou les milieux collants.Le logiciel Flex présente également une fonction de réglage qui per-met à l’utilisateur d’adapter le capteur à un fluide spécifique.Le contacteur de niveau LBFS détecte des liquides comme de l’eau et de l’huile. Il est même possible de détecter des produits secs, par exemple de la poussière de charbon ou des granulés de plastique.Le détecteur de niveau LBFS peut être fourni avec une sortie PNP, ainsi qu’avec une sortie NPN.La connexion de processus peut être facilement rendue étanche à l’aide de ruban PTFE ou d’un adaptateur à souder spécial pour le modèle hygiénique.
Dessins cotés
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
Page 3 / 8www.baumer.com
FR/1
6101
2
Des
sins
et c
arac
téris
tique
s so
us ré
serv
e de
mod
ifica
tion
sans
pré
avis
Fiche technique E21.01
LBFSDétecteur de niveau
+
-
1
4
2
3
+
-
1
4
2
3
+
-
1
4
2
3
+
-
1
4
2
3
LED
0 mA
20 mA
LED0 mA
20 mA
Page 4 Design and specifications subject to change without notice
Data sheet E21.01www.baumer.com/process
Safety 5´ digitStandard Ex ia IIC T5, ATEX II 1G (Gas)Ex ta IIIC T100 Da, ATEX II 1D (Dust) {2}Ex nA II T5, ATEX II 3G
Electrical Connection 6´ digitPlug, M12 plastic with LEDCable 5 meter {3}Plug, M12, stainless steel, without LED
Process Connection 7´ digitG1/2”G3/4”G1”G1/2” hygienic (for Acessories Universal) 3A / EHEDG {4} {6}G1/2” for reverse assembly {1}3/4”NPT {6}M18x1 {5}
Process Connection material 8´ digitStainless Steel 1.4301 - AISI 304Stainless Steel 1.4404 - AISI 316L
Output Configuration 9´ digitPNP outputNPN output
Configuration 10´ digitConfiguring according to customer specification
Ordering Details - Level Switch LBFSLBFS xxxx x (x)
0 1 2 3
1 2 3
1 2 3 4 5 6 7
1 2
1 2
(C)
Normally Closed
12...30 VDC
PNP Output 20 mA max.
NPN Output 20 mA max.
12...30 VDC
Electrical Installation
Notes:{1} Max. 85°C media temperature {2} Not valid with “cable connection” {3} Max ambient temperature 70°C{4} Max 130°C for <1 hour, Tamb 40°C{5} Only available in AISI 304{6} Only available in AISI 316L
PNP Output 20 mA max.
NPN Output 20 mA max.
12...30 VDC 12...30 VDC
Electrical Installation
+
-
1
4
2
3
+
-
1
4
2
3
+
-
1
4
2
3
+
-
1
4
2
3
LED
0 mA
20 mA
LED0 mA
20 mA
Page 4 Design and specifications subject to change without notice
Data sheet E21.01www.baumer.com/process
Safety 5´ digitStandard Ex ia IIC T5, ATEX II 1G (Gas)Ex ta IIIC T100 Da, ATEX II 1D (Dust) {2}Ex nA II T5, ATEX II 3G
Electrical Connection 6´ digitPlug, M12 plastic with LEDCable 5 meter {3}Plug, M12, stainless steel, without LED
Process Connection 7´ digitG1/2”G3/4”G1”G1/2” hygienic (for Acessories Universal) 3A / EHEDG {4} {6}G1/2” for reverse assembly {1}3/4”NPT {6}M18x1 {5}
Process Connection material 8´ digitStainless Steel 1.4301 - AISI 304Stainless Steel 1.4404 - AISI 316L
Output Configuration 9´ digitPNP outputNPN output
Configuration 10´ digitConfiguring according to customer specification
Ordering Details - Level Switch LBFSLBFS xxxx x (x)
0 1 2 3
1 2 3
1 2 3 4 5 6 7
1 2
1 2
(C)
Normally Closed
12...30 VDC
PNP Output 20 mA max.
NPN Output 20 mA max.
12...30 VDC
Electrical Installation
Notes:{1} Max. 85°C media temperature {2} Not valid with “cable connection” {3} Max ambient temperature 70°C{4} Max 130°C for <1 hour, Tamb 40°C{5} Only available in AISI 304{6} Only available in AISI 316L
PNP Output 20 mA max.
NPN Output 20 mA max.
12...30 VDC 12...30 VDC
Installation électrique
Dessins cotés
R
74 - 03
NPT
40
17.00
65
87
1
4
2
3
Page 3 Design and specifications subject to change without notice
Data sheet E21.01www.baumer.com/process
Electrical Connection
M12 plug Cable Function1 Brown + VDC2 White Normally Closed 3 Blue - VDC4 Black Normally Open
Dimensional Drawings
LBFS xx4x x LBFS xx5x x
G½” hygienic
NV22 mm
97
48
G½” A ISO288/1
9768
Ø27
NV24 mm
G½” revers assembly
M18x1
LBFS xx6x x LBFS xx7x x
Raccordements électriques
R
74 - 03
NPT
40
17.00
65
87
1
4
2
3
Page 3 Design and specifications subject to change without notice
Data sheet E21.01www.baumer.com/process
Electrical Connection
M12 plug Cable Function1 Brown + VDC2 White Normally Closed 3 Blue - VDC4 Black Normally Open
Dimensional Drawings
LBFS xx4x x LBFS xx5x x
G½” hygienic
NV22 mm
97
48
G½” A ISO288/1
9768
Ø27
NV24 mm
G½” revers assembly
M18x1
LBFS xx6x x LBFS xx7x x
R
74 - 03
NPT
40
17.00
65
87
1
4
2
3
Page 3 Design and specifications subject to change without notice
Data sheet E21.01www.baumer.com/process
Electrical Connection
M12 plug Cable Function1 Brown + VDC2 White Normally Closed 3 Blue - VDC4 Black Normally Open
Dimensional Drawings
LBFS xx4x x LBFS xx5x x
G½” hygienic
NV22 mm
97
48
G½” A ISO288/1
9768
Ø27
NV24 mm
G½” revers assembly
M18x1
LBFS xx6x x LBFS xx7x x
Connecteur M12 Câble Fonction1 Marron + V CC2 Blanc Contact à fermeture3 Bleu - V CC4 Noir Contact à ouverture
Sortie PNP20 mA max.
Sortie PNP20 mA max.
Sortie NPN20 mA max.
Sortie NPN20 mA max.
Contact à fermeture
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
Page 4 / 8www.baumer.com
FR/1
6101
2
Des
sins
et c
arac
téris
tique
s so
us ré
serv
e de
mod
ifica
tion
sans
pré
avis
Fiche technique E21.01
LBFSDétecteur de niveau
Configuration
Accessoires
Application
FlexProgrammer 9701
VAM023 PM023CAM023LB020
1
2
Page 5 Design and specifications subject to change without notice
Data sheet E21.01www.baumer.com/process
Configuration FlexProgrammer 9701
The FlexProgrammer 9701 is a dedicated tool to configure Baumer configurable products.
Type No. 9701-0001 comprises: FlexProgrammerCable with 2 aligator clips Cable from FlexProgrammer to M12 plug for TE2 Cable from FlexProgrammer to M12 Plug for LFFS, LBFS, CPXUSB cableCD with the FlexProgram software
AccessoriesFlexProgrammer 9701
Other accessories
Note: Ambient temperature range 0...50°C
Disconnect the power supply before connecting the Flex-Programmer 9701 to the Level Switch LBFS
Brown
BlueCable
M12 plug
Application
G1/2 welding sleeve AISI 304(for non hygienic installation)
LBFS xx5x x
LBFS xx5x x
VAM023 PM023CAM023LB020
1
2
Page 5 Design and specifications subject to change without notice
Data sheet E21.01www.baumer.com/process
Configuration FlexProgrammer 9701
The FlexProgrammer 9701 is a dedicated tool to configure Baumer configurable products.
Type No. 9701-0001 comprises: FlexProgrammerCable with 2 aligator clips Cable from FlexProgrammer to M12 plug for TE2 Cable from FlexProgrammer to M12 Plug for LFFS, LBFS, CPXUSB cableCD with the FlexProgram software
AccessoriesFlexProgrammer 9701
Other accessories
Note: Ambient temperature range 0...50°C
Disconnect the power supply before connecting the Flex-Programmer 9701 to the Level Switch LBFS
Brown
BlueCable
M12 plug
Application
G1/2 welding sleeve AISI 304(for non hygienic installation)
LBFS xx5x x
LBFS xx5x x
VAM023 PM023CAM023LB020
1
2
Page 5 Design and specifications subject to change without notice
Data sheet E21.01www.baumer.com/process
Configuration FlexProgrammer 9701
The FlexProgrammer 9701 is a dedicated tool to configure Baumer configurable products.
Type No. 9701-0001 comprises: FlexProgrammerCable with 2 aligator clips Cable from FlexProgrammer to M12 plug for TE2 Cable from FlexProgrammer to M12 Plug for LFFS, LBFS, CPXUSB cableCD with the FlexProgram software
AccessoriesFlexProgrammer 9701
Other accessories
Note: Ambient temperature range 0...50°C
Disconnect the power supply before connecting the Flex-Programmer 9701 to the Level Switch LBFS
Brown
BlueCable
M12 plug
Application
G1/2 welding sleeve AISI 304(for non hygienic installation)
LBFS xx5x x
LBFS xx5x x
VAM023 PM023CAM023LB020
1
2
Page 5 Design and specifications subject to change without notice
Data sheet E21.01www.baumer.com/process
Configuration FlexProgrammer 9701
The FlexProgrammer 9701 is a dedicated tool to configure Baumer configurable products.
Type No. 9701-0001 comprises: FlexProgrammerCable with 2 aligator clips Cable from FlexProgrammer to M12 plug for TE2 Cable from FlexProgrammer to M12 Plug for LFFS, LBFS, CPXUSB cableCD with the FlexProgram software
AccessoriesFlexProgrammer 9701
Other accessories
Note: Ambient temperature range 0...50°C
Disconnect the power supply before connecting the Flex-Programmer 9701 to the Level Switch LBFS
Brown
BlueCable
M12 plug
Application
G1/2 welding sleeve AISI 304(for non hygienic installation)
LBFS xx5x x
LBFS xx5x x
Exemples d’accessoires
Bride ISO 2852 Varivent G½ hygienic welding sleve in AISI 316
FlexProgrammer 9701
Connecteur M12
Remarque : Plage de température ambiante 0...50°C
Manchon à souder G1/2 AISI 304 (pour installation
non hygiénique)
Débrancher l’alimentation électrique avant de raccorder le FlexProgrammer 9701 au contacteur de niveau LBFS
Le FlexProgrammer 9701 est un outil dédié permettant de configurer tous les produits Flex configurables Baumer.
Le type réf. 9701-0001 comprend :FlexProgrammerCâblesCD avec logiciel FlexProgram
Câble
Marron
Bleu
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
Page 5 / 8www.baumer.com
FR/1
6101
2
Des
sins
et c
arac
téris
tique
s so
us ré
serv
e de
mod
ifica
tion
sans
pré
avis
Fiche technique E21.01
LBFSDétecteur de niveau
Température du fluide par rapport à la température ambiante
50,00
55,00
60,00
65,00
70,00
75,00
80,00
85,00
90,00
95,00
100,00
105,00
110,00
115,00
120,00
50 55 60 65 70 75 80 85 90 95 100 105
T pro
cess
(0 C)
Tambient (0C)
Ambient vs process temperature
Page 6 Design and specifications subject to change without notice
Data sheet E21.01www.baumer.com/process
Media Temperature versus Ambient Temperature Media Temperature°C
Ambient Temperature
Température du fluide°C
Température ambiante
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
Page 6 / 8www.baumer.com
FR/1
6101
2
Des
sins
et c
arac
téris
tique
s so
us ré
serv
e de
mod
ifica
tion
sans
pré
avis
Fiche technique E21.01
LBFSDétecteur de niveau
3
1
2
C +
B -
A PNP NO
NO
NC
COM
+
-
+
-
OUT
Page 7 Design and specifications subject to change without notice
Data sheet E21.01www.baumer.com/process
Ex ia IIC T5, ATEX II 1G - Installation
A Level Switch LBFS 1xxx x is Ex ia IIC T5, ATEX II 1G approved for application in hazardous areas in accordance with the current EU-directives. The product must be installed in accordance with prevailing guidelines for zone 0 with a barrier.
Ex-dataSupply range 24...30 VDC
Temperature class T1...T4: -40 < Tamb < 85°C
T1...T5: -40 < Tamb < 74°C
Internal inductivity Li < 10 µH
Internal capacity Ci < 43 nF
Barrier data U < 30 VDC ; I < 0.1 A ; P < 0.75 W
A certified Ex ia isolation barrier with the maximum values Umax = 30 VDC ; Imax = 0.1 A ; Pmax = 0.75 W must be used. Use the isolating module PROFSI 3-B25100-ALG-LS (for PNP output only) or a ZENER Barrier (for NPN output only) as shown below(see installation manual for special instructions).
Zone 0/1 Safe area
Zone 0/1 Safe area
M12 plug
Cable
Brown
Blue
Black
22 ...120VDC or
90...253VAC
Isolating Module
PROFSI3-B25100-ALG-LS
Level Switch LBFS
NB : only valid for PNP output
M12 plug
Cable
Brown
Blue
Black
Level Switch LBFS
NB : only valid for NPN outputTwo-channel
ZENER BARRIER
24VDC
Output
Installation - Ex ia IIC T5, ATEX II 1G
Un détecteur de niveau LBFS 1xxx x est approuvé Ex ia IIC T5, ATEX II 1G pour application dans des zones dangereuses conformément aux directives européennes en vigueur.Le produit doit être installé conformément aux directives applicables pour la zone 0 avec une barrière.Il faut utiliser une barrière isolante certifiée Ex ia avec les valeurs maximales Umax = 30 V CC ; Imax = 0,1 A ; Pmax = 0,75 W.Utiliser le module isolant PROFSI 3-B25100-ALG-LS (pour sortie PNP uniquement) ou une barrière ZENER (pour sortie NPN uniquement) comme illustré ci-dessous (voir manuel d’installation pour les instruc-tions particulières).
NB : pour une sortie PNP, utiliser impérativement la barrière PROFSI3-B25100-ALG-LS.
Barrière à isolation galvanique PROFSI3-B25100-ALG-LS
3
1
2
C +
B -
A PNP NO
NO
NC
COM
+
-
+
-
OUT
Page 7 Design and specifications subject to change without notice
Data sheet E21.01www.baumer.com/process
Ex ia IIC T5, ATEX II 1G - Installation
A Level Switch LBFS 1xxx x is Ex ia IIC T5, ATEX II 1G approved for application in hazardous areas in accordance with the current EU-directives. The product must be installed in accordance with prevailing guidelines for zone 0 with a barrier.
Ex-dataSupply range 24...30 VDC
Temperature class T1...T4: -40 < Tamb < 85°C
T1...T5: -40 < Tamb < 74°C
Internal inductivity Li < 10 µH
Internal capacity Ci < 43 nF
Barrier data U < 30 VDC ; I < 0.1 A ; P < 0.75 W
A certified Ex ia isolation barrier with the maximum values Umax = 30 VDC ; Imax = 0.1 A ; Pmax = 0.75 W must be used. Use the isolating module PROFSI 3-B25100-ALG-LS (for PNP output only) or a ZENER Barrier (for NPN output only) as shown below(see installation manual for special instructions).
Zone 0/1 Safe area
Zone 0/1 Safe area
M12 plug
Cable
Brown
Blue
Black
22 ...120VDC or
90...253VAC
Isolating Module
PROFSI3-B25100-ALG-LS
Level Switch LBFS
NB : only valid for PNP output
M12 plug
Cable
Brown
Blue
Black
Level Switch LBFS
NB : only valid for NPN outputTwo-channel
ZENER BARRIER
24VDC
Output
NB : valable uniquement pour une sortie NPN
Détecteur de niveau LBFS
Détecteur de niveau LBFS
Données ExPlage d'alimentation 24...30 VDCClasse de température T1...T4: -40 < Tamb < 85 °C
T1...T5: -40 < Tamb < 74 °C
Inductivité interne Li < 10 μHCapacité interne Ci < 43 nFDonnées de barrière U < 30 VDC ; I < 0.1 A ; P < 0.75 W
Connecteur M12
Connecteur M12
Câble
Marron
Sortie
ou
BARRIÈRE ZENERà deux canaux
Zone de sécurité
Zone de sécurité
Marron
Bleu
Bleu
Noir
NoirCâble
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
Page 7 / 8www.baumer.com
FR/1
6101
2
Des
sins
et c
arac
téris
tique
s so
us ré
serv
e de
mod
ifica
tion
sans
pré
avis
Fiche technique E21.01
LBFSDétecteur de niveau
+
-
Page 8 Design and specifications subject to change without notice
Data sheet E21.01www.baumer.com/process
EN/2
011-
10-1
4 T
his
data
she
et m
ay o
nly
be re
prod
uced
in fu
ll.
A Level Switch LBFS 2xxx x Ex ta IIIC T100 Da, ATEX II 1D approved for application in hazardous areas in accordance with the current EU-directives. The product must be installed in accordance with prevailing guidelines for zone 20 without a barrier.
Ex-dataSupply range 12.5...30 VDC, max 100 mA
Temperature class T100
Ex ta IIIC T100 Da, ATEX II 1D - Installation
M12 plug
Cable
Brown
Blue
Black or white
12.5 ...30 VDC
LOAD
Level Switch LBFS
NB : The cable must be fixed to an external strain relief not more than 5 cm from the Level Switch. Only IP 67 compliant cable must be used for installation.
See below.
Ex nA II T5, ATEX II 3G - Installation
A Level Switch LBFS3 xxx x is Ex nA II T5, ATEX II 3G approved for application in hazardous areas in accordance with the current EU-directives. The product must be installed in accordance with prevailing guidelines for zone 2 without a barrier.
Ex-dataSupply range 12.5...30 VDC, Max. 0.1A
Temperature class T1...T5
M12 plug
Cable
Brown
Blue
Black or white
12.5 ...30 VDC
LOAD
Level Switch LBFS
Ex ia and Ex ta - Installation for both gas and dust
Only IP 67 compliant cable must be used for installationThe cable must be fixed to an external strain relief not more than 5cm from the Level SwitchA zener barrier / isolating module must be used for protection
Installation - Ex ta IIIC T100 Da, ATEX II 1D
Installation - Ex nA II T5, ATEX II 3G
Un détecteur de niveau LBFS 2xxx x est approuvé Ex ta IIIC T100 Da, ATEX II 1D pour application dans des zones dangereuses conformé-ment aux directives européennes en vigueur.Le produit doit être installé conformément aux directives applicables pour la zone 20 sans barrière.
Un détecteur de niveau LBFS3 xxx x est approuvé Ex nA II T5, ATEX II 3G pour application dans des zones dangereuses conformément aux directives européennes en vigueur.Le produit doit être installé conformément aux directives applicables pour la zone 2 sans barrière.
NB : le câble doit être fixé à un collier de serrage externe situé à moins de 5 cm du contacteur de niveau. Pour l’installation, utiliser uniquement un câble conforme IP 67.Voir ci-dessous.
+
-
Page 8 Design and specifications subject to change without notice
Data sheet E21.01www.baumer.com/process
EN/2
011-
10-1
4 T
his
data
she
et m
ay o
nly
be re
prod
uced
in fu
ll.
A Level Switch LBFS 2xxx x Ex ta IIIC T100 Da, ATEX II 1D approved for application in hazardous areas in accordance with the current EU-directives. The product must be installed in accordance with prevailing guidelines for zone 20 without a barrier.
Ex-dataSupply range 12.5...30 VDC, max 100 mA
Temperature class T100
Ex ta IIIC T100 Da, ATEX II 1D - Installation
M12 plug
Cable
Brown
Blue
Black or white
12.5 ...30 VDC
LOAD
Level Switch LBFS
NB : The cable must be fixed to an external strain relief not more than 5 cm from the Level Switch. Only IP 67 compliant cable must be used for installation.
See below.
Ex nA II T5, ATEX II 3G - Installation
A Level Switch LBFS3 xxx x is Ex nA II T5, ATEX II 3G approved for application in hazardous areas in accordance with the current EU-directives. The product must be installed in accordance with prevailing guidelines for zone 2 without a barrier.
Ex-dataSupply range 12.5...30 VDC, Max. 0.1A
Temperature class T1...T5
M12 plug
Cable
Brown
Blue
Black or white
12.5 ...30 VDC
LOAD
Level Switch LBFS
Ex ia and Ex ta - Installation for both gas and dust
Only IP 67 compliant cable must be used for installationThe cable must be fixed to an external strain relief not more than 5cm from the Level SwitchA zener barrier / isolating module must be used for protection
Données ExPlage d'alimentation 12.5...30 VDC, max. 100 mAClasse de température T100
Données ExPlage d'alimentation 12.5...30 VCC, max. 0.1AClasse de température T1...T5
Connecteur M12
Connecteur M12
Noir ou blanc CHARGE
CHARGENoir ou blanc
Marron
Marron
Bleu
Bleu
Câble
Câble
Détecteur de niveau LBFS
Détecteur de niveau LBFS
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
Page 8 / 8www.baumer.com
FR/1
6101
2
Des
sins
et c
arac
téris
tique
s so
us ré
serv
e de
mod
ifica
tion
sans
pré
avis
Fiche technique E21.01
LBFSDétecteur de niveau
–ModèleDétecteur de niveau LBFS
Sécurité Digit 5'Standard 0Ex ia IIC T5, ATEX II 1G (gaz) (7) 1Ex ta IIIC T100 Da, ATEX II 1D (poussière) (2) 2Ex nA II T5, ATEX II 3G 3Ex ia IIC T5 / Ex ta IIC T100 Da (gaz/poussière mélangé) (2) 4
Raccordements électriques Digit 6'Connecteur M12 en plastique avec LED 1Câble 5 mètres (3) 2Connecteur M12 en acier inoxydable sans LED 3
Connexions de processus Digit 7'G1/2" 1G3/4" 2G1" 3G1/2" hygiénique (pour accessoires universels) 3A / EHEDG (4) (6) 4G1/2" pour montage inverse (1) 53/4" NPT (6) 6M18x1(5) 7
Matériaux connexions de processus Digit 8'Acier inoxydable 1.4301 - AISI 304 1Acier inoxydable 1.4404 - AISI 316L 2
Configuration de sortie Digit 9'Sortie PNP 1Sortie NPN 2
Configuration Digit 10'Pas de configuration 0Configuration selon spécifications client C
(1) Température de fluide max. 85 °C(2) Non applicable à « raccordement de câble »(3) Température ambiante max. 70 °C(4) Max. 130 °C pour <1 heure, Tamb 40 °C(5) Uniquement disponible dans AISI 304(6) Uniquement disponible dans AISI 316L(7) Pour une sortie PNP, le modèle de barrière PFOFSI3-B25100-ALG-LS est exigé à des fins de fonctionnement. Pour une sortie NPN, une barrière standard peut être utilisée.
Détails de commande
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]