dvb-t gigabyte u8000-rh dmesg

8/14/2019 DVB-T Gigabyte U8000-RH dmesg

1/8

[ 0.000000] Initializing cgroup subsys cpuset[ 0.000000] Initializing cgroup subsys cpu[ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic)[ 0.000000] BIOS-provided physical RAM map:[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)[ 0.000000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)[ 0.000000] BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)[ 0.000000] BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)[ 0.000000] 0MB HIGHMEM available.[ 0.000000] 767MB LOWMEM available.[ 0.000000] found SMP MP-table at 000f4e60[ 0.000000] Entering add_active_range(0, 0, 196592) 0 entries of 256 used[ 0.000000] Zone PFN ranges:[ 0.000000] DMA 0 -> 4096[ 0.000000] Normal 4096 -> 196592[ 0.000000] HighMem 196592 -> 196592

[ 0.000000] Movable zone start PFN for each node[ 0.000000] early_node_map[1] active PFN ranges[ 0.000000] 0: 0 -> 196592[ 0.000000] On node 0 totalpages: 196592[ 0.000000] DMA zone: 32 pages used for memmap[ 0.000000] DMA zone: 0 pages reserved[ 0.000000] DMA zone: 4064 pages, LIFO batch:0[ 0.000000] Normal zone: 1503 pages used for memmap[ 0.000000] Normal zone: 190993 pages, LIFO batch:31[ 0.000000] HighMem zone: 0 pages used for memmap[ 0.000000] Movable zone: 0 pages used for memmap[ 0.000000] DMI 2.3 present.[ 0.000000] ACPI: RSDP signature @ 0xC00F6930 checksum 0

[ 0.000000] ACPI: RSDP 000F6930, 0014 (r0 PM880 )[ 0.000000] ACPI: RSDT 2FFF3000, 002C (r1 PM880 AWRDACPI 42302E31 AWRD0)[ 0.000000] ACPI: FACP 2FFF3040, 0074 (r1 PM880 AWRDACPI 42302E31 AWRD0)[ 0.000000] ACPI: DSDT 2FFF30C0, 4ECD (r1 PM880 AWRDACPI 1000 MSFT100000E)[ 0.000000] ACPI: FACS 2FFF0000, 0040[ 0.000000] ACPI: APIC 2FFF7FC0, 0068 (r1 PM880 AWRDACPI 42302E31 AWRD0)[ 0.000000] ACPI: PM-Timer IO Port: 0x408[ 0.000000] ACPI: Local APIC address 0xfee00000[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[ 0.000000] Processor #0 15:3 APIC version 20[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)[ 0.000000] ACPI: IRQ0 used by override.[ 0.000000] ACPI: IRQ2 used by override.[ 0.000000] ACPI: IRQ9 used by override.


2/8


3/8

[ 22.581713] Checking 'hlt' instruction... OK.[ 22.597951] SMP alternatives: switching to UP code[ 22.600342] Freeing SMP alternatives: 11k freed[ 22.600517] Early unpacking initramfs... done[ 22.993445] ACPI: Core revision 20070126[ 22.993526] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml notfound.[ 22.997736] CPU0: Intel(R) Celeron(R) CPU 2.40GHz stepping 03

[ 22.997788] Total of 1 processors activated (4794.94 BogoMIPS).[ 22.998542] ENABLING IO-APIC IRQs[ 22.998869] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1[ 23.144541] Brought up 1 CPUs[ 23.144607] CPU0 attaching sched-domain:[ 23.144612] domain 0: span 01[ 23.144615] groups: 01[ 23.144904] net_namespace: 64 bytes[ 23.144918] Booting paravirtualized kernel on bare hardware[ 23.145678] Time: 13:00:52 Date: 07/16/08[ 23.145717] NET: Registered protocol family 16[ 23.146091] EISA bus registered[ 23.146136] ACPI: bus type pci registered

[ 23.152722] PCI: PCI BIOS revision 2.10 entry at 0xfb3f0, last bus=1[ 23.152726] PCI: Using configuration type 1[ 23.152750] Setting up standard PCI resources[ 23.155207] ACPI: EC: Look up EC in DSDT[ 23.162017] ACPI: Interpreter enabled[ 23.162024] ACPI: (supports S0 S1 S4 S5)[ 23.162046] ACPI: Using IOAPIC for interrupt routing[ 23.172324] ACPI: PCI Root Bridge [PCI0] (0000:00)[ 23.173791] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT][ 23.227366] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)[ 23.227589] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)[ 23.227809] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5[ 23.228004] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0,

disabled.[ 23.228191] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0,disabled.[ 23.228391] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0,disabled.[ 23.228574] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0,disabled.[ 23.228754] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0,disabled.[ 23.228976] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)[ 23.229177] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)[ 23.229377] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)[ 23.229608] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)

[ 23.229857] Linux Plug and Play Support v0.97 (c) Adam Belay[ 23.229922] pnp: PnP ACPI init[ 23.229940] ACPI: bus type pnp registered[ 23.235950] pnp: PnP ACPI: found 13 devices[ 23.235956] ACPI: ACPI bus type pnp unregistered[ 23.235962] PnPBIOS: Disabled by ACPI PNP[ 23.236440] PCI: Using ACPI for IRQ routing[ 23.236447] PCI: If a device doesn't work, try "pci=routeirq". If it helps,post a report[ 23.304223] NET: Registered protocol family 8[ 23.304228] NET: Registered protocol family 20


4/8

[ 23.304360] AppArmor: AppArmor Filesystem Enabled[ 23.308203] Time: tsc clocksource has been installed.[ 23.316280] system 00:00: iomem range 0xc8800-0xcbfff has been reserved[ 23.316285] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved[ 23.316288] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved[ 23.316291] system 00:00: iomem range 0xfc000-0xfffff could not be reserved[ 23.316295] system 00:00: iomem range 0x2fff0000-0x2fffffff could not bereserved

[ 23.316299] system 00:00: iomem range 0xffff0000-0xffffffff could not bereserved[ 23.316303] system 00:00: iomem range 0x0-0x9ffff could not be reserved[ 23.316306] system 00:00: iomem range 0x100000-0x2ffeffff could not be reserved[ 23.316309] system 00:00: iomem range 0xfec00000-0xfec00fff could not bereserved[ 23.316313] system 00:00: iomem range 0xfee00000-0xfee00fff could not bereserved[ 23.316316] system 00:00: iomem range 0xfff80000-0xfffeffff could not bereserved[ 23.316327] system 00:02: ioport range 0x400-0x47f has been reserved[ 23.316330] system 00:02: ioport range 0x500-0x50f has been reserved[ 23.316338] system 00:03: ioport range 0x4d0-0x4d1 has been reserved

[ 23.316341] system 00:03: ioport range 0x800-0x805 has been reserved[ 23.316344] system 00:03: ioport range 0x290-0x297 has been reserved[ 23.347088] PCI: Bridge: 0000:00:01.0[ 23.347094] IO window: a000-afff[ 23.347100] MEM window: dc000000-ddffffff[ 23.347105] PREFETCH window: d8000000-dbffffff[ 23.347128] PCI: Setting latency timer of device 0000:00:01.0 to 64[ 23.347147] NET: Registered protocol family 2[ 23.384180] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)[ 23.384615] TCP established hash table entries: 131072 (order: 8, 1048576bytes)[ 23.385652] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)[ 23.386230] TCP: Hash tables configured (established 131072 bind 65536)

[ 23.386235] TCP reno registered[ 23.396281] checking if image is initramfs... it is[ 23.847329] Switched to high resolution mode on CPU 0[ 24.163566] Freeing initrd memory: 7731k freed[ 24.164643] audit: initializing netlink socket (disabled)[ 24.164663] audit(1216213252.560:1): initialized[ 24.167992] VFS: Disk quotas dquot_6.5.1[ 24.168128] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)[ 24.168361] io scheduler noop registered[ 24.168365] io scheduler anticipatory registered[ 24.168368] io scheduler deadline registered[ 24.168389] io scheduler cfq registered (default)[ 24.168407] PCI: VIA PCI bridge detected. Disabling DAC.

[ 24.168484] PCI: Bypassing VIA 8237 APIC De-Assert Message[ 24.168494] Boot video device is 0000:01:00.0[ 24.168987] isapnp: Scanning for PnP cards...[ 24.522789] isapnp: No Plug & Play device found[ 24.619761] Real Time Clock Driver v1.12ac[ 24.619928] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharingenabled[ 24.620091] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A[ 24.621911] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A[ 24.623457] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024blocksize


5/8

[ 24.623574] input: Macintosh mouse button emulation as/devices/virtual/input/input0[ 24.623767] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq1,12[ 24.624228] serio: i8042 KBD port at 0x60,0x64 irq 1[ 24.624236] serio: i8042 AUX port at 0x60,0x64 irq 12[ 24.626230] mice: PS/2 mouse device common for all mice[ 24.626466] EISA: Probing bus 0 at eisa.0

[ 24.626507] EISA: Detected 0 cards.[ 24.626511] cpuidle: using governor ladder[ 24.626514] cpuidle: using governor menu[ 24.626628] NET: Registered protocol family 1[ 24.626670] Using IPI No-Shortcut mode[ 24.626713] registered taskstats version 1[ 24.626844] Magic number: 0:547:28[ 24.626859] hash matches device ttydb[ 24.627023] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found[ 24.627025] EDD information not available.[ 24.627389] Freeing unused kernel memory: 368k freed[ 24.654001] input: AT Translated Set 2 keyboard as/devices/platform/i8042/serio0/input/input1

[ 25.977178] fuse init (API version 7.9)[ 26.001981] ACPI: Fan [FAN] (on)[ 26.012022] ACPI Exception (processor_core-0816): AE_NOT_FOUND, ProcessorDevice is not present [20070126][ 26.014126] ACPI: Thermal Zone [THRM] (40 C)[ 26.970251] SCSI subsystem initialized[ 27.057862] usbcore: registered new interface driver usbfs[ 27.057898] usbcore: registered new interface driver hub[ 27.071089] libata version 3.00 loaded.[ 27.082147] usbcore: registered new device driver usb[ 27.105979] pata_via 0000:00:0f.1: version 0.3.3[ 27.106309] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20[ 27.106320] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20

(level, low) -> IRQ 16[ 27.117751] scsi0 : pata_via[ 27.128534] USB Universal Host Controller Interface driver v3.0[ 27.153624] scsi1 : pata_via[ 27.155669] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xc800 irq 14[ 27.155675] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xc808 irq 15[ 27.181134] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker[ 27.181144] via-rhine: Broken BIOS detected, avoid_D3 enabled.[ 27.281991] Floppy drive(s): fd0 is 1.44M[ 27.302084] FDC 0 is a post-1991 82077[ 27.325858] ata1.00: ATA-7: ExcelStor Technology J840, PF1OA21B, max UDMA/133[ 27.325864] ata1.00: 80418240 sectors, multi 16: LBA48[ 27.349705] ata1.00: configured for UDMA/133

[ 27.669164] ata2.00: ATAPI: _NEC DVD_RW ND-2510A, 2.15, max UDMA/33[ 27.840785] ata2.00: configured for UDMA/33[ 27.840976] scsi 0:0:0:0: Direct-Access ATA ExcelStor Techno PF1O PQ:0 ANSI: 5[ 27.842247] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-2510A 2.15 PQ:0 ANSI: 5[ 27.846598] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21[ 27.846611] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21(level, low) -> IRQ 17[ 27.846628] uhci_hcd 0000:00:10.0: UHCI Host Controller[ 27.847076] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number


6/8

1[ 27.847122] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000cc00[ 27.847334] usb usb1: configuration #1 chosen from 1 choice[ 27.847372] hub 1-0:1.0: USB hub found[ 27.847382] hub 1-0:1.0: 2 ports detected[ 27.948393] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21(level, low) -> IRQ 17[ 27.948412] uhci_hcd 0000:00:10.1: UHCI Host Controller

[ 27.948453] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number2[ 27.948482] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000d000[ 27.948642] usb usb2: configuration #1 chosen from 1 choice[ 27.948678] hub 2-0:1.0: USB hub found[ 27.948688] hub 2-0:1.0: 2 ports detected[ 28.052222] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21(level, low) -> IRQ 17[ 28.052242] uhci_hcd 0000:00:10.2: UHCI Host Controller[ 28.052287] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number3[ 28.052317] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000d400[ 28.052478] usb usb3: configuration #1 chosen from 1 choice

[ 28.052513] hub 3-0:1.0: USB hub found[ 28.052522] hub 3-0:1.0: 2 ports detected[ 28.156038] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21(level, low) -> IRQ 17[ 28.156056] uhci_hcd 0000:00:10.3: UHCI Host Controller[ 28.156099] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number4[ 28.156130] uhci_hcd 0000:00:10.3: irq 17, io base 0x0000d800[ 28.156285] usb usb4: configuration #1 chosen from 1 choice[ 28.156321] hub 4-0:1.0: USB hub found[ 28.156337] hub 4-0:1.0: 2 ports detected[ 28.260379] sata_via 0000:00:0f.0: version 2.3[ 28.260418] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20

(level, low) -> IRQ 16[ 28.260473] sata_via 0000:00:0f.0: routed to hard irq line 11[ 28.263378] scsi2 : sata_via[ 28.264510] scsi3 : sata_via[ 28.264591] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xb400 bmdma 0xc000 irq 16[ 28.264594] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xbc00 bmdma 0xc008 irq 16[ 28.315611] usb 1-2: new full speed USB device using uhci_hcd and address 2[ 28.467320] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)[ 28.488104] usb 1-2: configuration #1 chosen from 1 choice[ 28.678961] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)[ 28.690057] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21(level, low) -> IRQ 17[ 28.690079] ehci_hcd 0000:00:10.4: EHCI Host Controller

[ 28.690142] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number5[ 28.690196] ehci_hcd 0000:00:10.4: irq 17, io mem 0xde000000[ 28.698976] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec2004[ 28.699171] usb usb5: configuration #1 chosen from 1 choice[ 28.699211] hub 5-0:1.0: USB hub found[ 28.699221] hub 5-0:1.0: 8 ports detected[ 28.803658] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23[ 28.803671] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23(level, low) -> IRQ 18


7/8

[ 28.807983] eth0: VIA Rhine II at 0xde001000, 00:e0:4c:cf:68:5c, IRQ 18.[ 28.808697] eth0: MII PHY found at address 1, status 0x786d advertising 05e1Link 41e1.[ 28.832913] Driver 'sd' needs updating - please use bus_type methods[ 28.833046] sd 0:0:0:0: [sda] 80418240 512-byte hardware sectors (41174 MB)[ 28.833068] sd 0:0:0:0: [sda] Write Protect is off[ 28.833072] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00[ 28.833102] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,

doesn't support DPO or FUA[ 28.833181] sd 0:0:0:0: [sda] 80418240 512-byte hardware sectors (41174 MB)[ 28.833199] sd 0:0:0:0: [sda] Write Protect is off[ 28.833203] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00[ 28.833232] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,doesn't support DPO or FUA[ 28.833238] sda:Driver 'sr' needs updating - please use bus_type methods[ 28.846628] sda1 sda2 sda3[ 28.846794] sd 0:0:0:0: [sda] Attached SCSI disk[ 28.858120] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray[ 28.858129] Uniform CD-ROM driver Revision: 3.20[ 28.858212] sr 1:0:0:0: Attached scsi CD-ROM sr0[ 28.862826] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 28.862855] sr 1:0:0:0: Attached scsi generic sg1 type 5[ 29.222964] kjournald starting. Commit interval 5 seconds[ 29.222989] EXT3-fs: mounted filesystem with ordered data mode.[ 29.266006] usb 1-2: USB disconnect, address 2[ 29.633328] usb 5-2: new high speed USB device using ehci_hcd and address 2[ 29.766089] usb 5-2: configuration #1 chosen from 1 choice[ 37.243067] pci_hotplug: PCI Hot Plug PCI Core version: 0.5[ 37.304173] Linux agpgart interface v0.102[ 37.360220] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4[ 37.400834] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset[ 37.410218] agpgart: AGP aperture is 128M @ 0xd0000000[ 38.246677] input: Power Button (FF) as /devices/virtual/input/input2[ 38.262489] ACPI: Power Button (FF) [PWRF]

[ 38.262603] input: Power Button (CM) as /devices/virtual/input/input3[ 38.274453] ACPI: Power Button (CM) [PWRB][ 38.274577] input: Sleep Button (CM) as /devices/virtual/input/input4[ 38.290451] ACPI: Sleep Button (CM) [SLPB][ 38.397367] input: PC Speaker as /devices/platform/pcspkr/input/input5[ 38.436115] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1[ 39.804586] NET: Registered protocol family 10[ 39.804894] lo: Disabled Privacy Extensions[ 39.899802] parport_pc 00:0a: reported by Plug and Play ACPI[ 39.899852] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE][ 40.367229] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22[ 40.367243] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22(level, low) -> IRQ 19

[ 40.367400] PCI: Setting latency timer of device 0000:00:11.5 to 64[ 41.349368] input: ImExPS/2 Generic Explorer Mouse as/devices/platform/i8042/serio1/input/input6[ 43.853502] lp0: using parport0 (interrupt-driven).[ 44.507631] EXT3 FS on sda1, internal journal[ 44.677709] device-mapper: uevent: version 1.0.3[ 44.677754] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [email protected][ 45.565914] kjournald starting. Commit interval 5 seconds[ 45.566095] EXT3 FS on sda3, internal journal[ 45.566102] EXT3-fs: mounted filesystem with ordered data mode.


8/8

[ 46.135799] ip_tables: (C) 2000-2006 Netfilter Core Team[ 46.438449] PPP generic driver version 2.4.2[ 46.483820] NET: Registered protocol family 17

dvb-t gigabyte u8000-rh dmesg

Documents