ww

w.m

icro

nas.

com

O

rder

No.

PR

-202

7-3E

Fi

rst

publ

ishe

d in

Apr

il 20

16

Linear and Multi-Axis Hall-Effect Sensors

Hall_Sensor_Selection_Guide_for_Automotive_Applications_mit_HAC37_ueberarbeitet.indd 3 22.04.2016 10:33:28

자동차 어플리케이션을 위한 홀 센서 선택 가이드

ww

w.m

icro

nas.

com

O

rder

No.

PR

-202

7-3E

Fi

rst

publ

ishe

d in

Apr

il 20

16

Micronas Company Profile

TDK 의 그룹의 일원으로서의 Micronas 는 센서와 제어용 제품에 있어 가장 선호되는 파트너로

인정받고 있습니다. Micronas 는 전세계 유수의 자동차 전장 제품을 주력으로 하는 고객사들과

함께 하고 있으며 지속적인 성공을 위한 장기적인 파트너쉽을 유지하고 있습니다.

Micronas 는 스위스 취리히에 지주회사 그리고 독일의 프라이브루크에 실질적인 운영본부를

갖고 있으며 900 명 정도의 직원이 함께하고 있습니다. Micronas 와 제품 군들에 대한 자세한

정보를 원하시면 www.micronas.com 을 방문해 주시기 바랍니다.

• 3 0 억 개 이 상 의 홀 센 서 판 매

• 선 형 홀 센 서 판 매 1 위 (IHS 2013)

Global Presence

Design-Centers Freiburg – Germany Munich – Germany

Production Sites

Freiburg – Germany

Production + R&D Marketing, Sales, FAE Glenrothes – UK

Hall_Switch_Selection_Guide_for_Automotive_and_Industrial_Applications_ohne_526_final_V2.indd 2 18.11.2015 09:49:29

www.micronas.com

PackageMarking

Code

MOQ / MSQ QuantityPackage Drawing

RoHS compliant

ReelAmmopack

1), 2) Bulk 2)

SOIC8 DJ 7,000 – – Yes

TO92UA UA – 2,000 2,000 Yes

TO92UP UP – 2,000 – Yes

TO92UP with caps

CV – 2,000 2,000 Yes

TO92UT UT – 2,000 2,000 Yes

SOT89 SF 2,000 – – Yes

TSSOP14 GP 8,000 – – Yes

TO92UF UF 7,000 – – Yes

For additional information please read or ask for our documentation “Sensors and Controllers Ordering Codes, Packaging, Handling”

1) Pin configuration inline, spread 2) Pin configuration inline, not spread

Packages

Micronas GmbH Hans-Bunte-Strasse 19 I 79108 Freiburg I Germany Phone +49 761 517-0 I Fax +49 761 517 2174

info@micronas.com

Contact Information available

www.micronas.com General

www.service.micronas.com(registration needed)

Data sheets, application notes, programming guides, software…

support_sensor@micronas.com Technical support

Micronas Contact

Hall_Sensor_Selection_Guide_for_Automotive_Applications_mit_HAC37_ueberarbeitet.indd 1 22.04.2016 10:33:20

HAL APB 1.5

Application & Programming Board

Supported Sensors:

HAL 1820

HAL 37xy

HAL 28xy

HAL 242x

in combination with Extension Board v.4.0

HAL  APB 5.1

Application & Programming Board

Supported Sensors:

HAL 8xy

standalone tool

HAL USB Programming Tool v.1.0

Supported Sensors:

HAL 1820

HAL 24xy

HAL 37xy

in combination with Extension Board v.4.0

Micronas Extension Board v.4.0

Connectable Sensor Packages:

TO-92 (3-pin) package

TO-92UP (4-pin) package

SOT-89 (4-pin) package

SOIC-8 (8-pin) package

Connectable Programming Tools:

HAL-APB V1.x Programmer Board

HAL USB-Kit

Selection Guide for Automotive Applications

Linear and Multi-Axis Hall-Effect Sensors

Micronas Extension Board TSSOP-14

Connectable Sensor Packages:

TSSOP-14 (14-pin) package

Connectable Programming Tools:

HAL-APB V1.x Programmer Board

HAL USB-Kit

Hall_Sensor_Selection_Guide_for_Automotive_Applications_mit_HAC37_ueberarbeitet.indd 4 22.04.2016 10:33:34

개발 지원 툴

1. 어플리케이션에 따른 센서 선택 가이드

추천 제품 제품 설명 대치품

Accelerator Pedal HAL 835 페달 공회전 위치(0°)에서 최소한의 에러 HAL 3725

HAR 2425 페달 공회전 위치(0°)에서 최소한의 에러

추가적인 센서 출력 기능

Adaptive Frontlight System HAL 835 온도변화 대비 높은 신뢰성 보장

– Adaptive Suspension System / Chassis Position

HAL 3715 모듈로 90 기능을 이용하여 유연한 설계 가능

HAL 2850

Brake Pedal Position HAL 2455 HAR 2455

작은 각도에서 우수한 성능 및 선형

측정용 센서 HAR2455 는 듀얼다이(추가

센싱 및 출력 기능)

HAL 3736 / HAL 3737

Clutch Cylinder HAL 37xy 40mm 의 선형 측정이 필요한

어플리케이션에서 매우 높은 정확도가

요구될 때 HAL37 시리즈 추천

HAL 855

EGR / Cut-Off Valve / Waste Gate Actuator

HAL 37xy 1% 이내의 선형 에러가 요구되는 경우 HAL 835

Fuel Level Detection HAL 835 가격대비 합리적이며 아날로그 출력의 인터페이스가 필요한 경우

HAL 3725

Gear Shift Selector HAL 37xy 사용 범위가 120° 를 넘고 매우 정밀한 정확성이 요구 될 때

HAL 2425

Steering Angle HAL 3735 360°의 각도 범위 필요 및 디지털 출력

인터페이스 필요 시

–

Steering Torque HAL 283x 작은 각도 측정용의 SENT 출력이 필요

시 (듀얼다이 제품은 준비 중)

–

Throttle Position HAL 37xy 120° 각도에서 매우 높은 정밀도 와

간단한 회로 요구 시

HAC 830

Trans- mission

Neutral Detection Sensor

HAL 835 온도 변화에 높은 안정성을 갖고 센서 출력이 유연 (아날로그, PWM)

HAL 24xy

Dual-Clutch Transmis- sion Position with Integrated ECU

HAL 18xy 대부분의 보상이 ECU 측에서 이루어 진다면 저사양 및 가격 고려 시

HAL 83x

Dual-Clutch Transmis- sion Position without Integrated ECU

HAL 373x 40mm 의 선형 측정이 필요한 어플리케이션에서 매우 높은 정확도가 요구될 때 HAL37 시리즈 추천

HAL 387x

Transmission Range Sensor

HAL 373x 40mm 의 선형 측정이 필요한 어플리케이션에서 매우 높은 정확도가 요구될 때 HAL37 시리즈 추천

HAL 387x

Neutral Gear Position HAL 373x 2D 센서가 필요하며 180 를 넘는 각도 측정이 필요 시

HAL 835

Turbo Charger Actuator HAL 37xy 1% 이내의 선형 에러가 요구되는 경우 HAL 835

Hall_Sensor_Selection_Guide_for_Automotive_Applications_mit_HAC37_ueberarbeitet.indd 8

Recommended Solution

Comment Alternative

Accelerator Pedal HAL 835 Smallest error by pedal idle position (0°) HAL 3725HAR 3725

HAR 2425 Smallest error by pedal idle position (0°) and redundancy

Adaptive Frontlight System HAL 835 High immunity against temperature varia-tion –

Adaptive Suspension System / Chassis Position

HAL 3715 Flexible and easy assembly thanks to Modulo 90 feature

HAL 2850

Brake Pedal Position HAL 2455 HAR 2455

Smallest error for small angles or linear movement / with digital output / HAR 2455 for redundancy

HAL 3736 HAR 3737

Clutch Cylinder HAL 37xyHAR 37xy

Application requires measurement of 40 mm movement, highest accuracy achievable

HAL 855

EGR / Cut-Off Valve / Waste Gate Actuator

HAL 37xyHAC 37xy

1% full-scale error required by application HAL  835

Fuel Level Detection HAL 835 Price-sensitive application & analog output standard interface for this application

HAL 3725

Gear Shift Selector HAL 37xy Usual angular range is above 120°, highest accuracy achievable with HAL 37xy

HAL 2425

Steering Angle HAL 3735 360° application & digital output –

Steering Torque HAL 283x smal angle application & SENT proto-col / Redundant version available soon (HAR2835)

–

Throttle Position HAR 37xyHAR 37xyHAC 37xy

Highest angle accuracy for 120° and simple magnetic circuit

HAC 830

Trans- mission

Neutral Detection Sensor

HAL 835 High temperature stability and output signal flexibility (analog and PWM)

HAL 24xy

Dual-Clutch Transmis-sion Position with Integrated ECU

HAL 18xy All compensation (sensitivity / offset, etc.) will be done by ECU software. Low-end linear sensor is required.

HAL 83x

Dual-Clutch Transmis-sion Position without Integrated ECU

HAL 373xHAC 373x

Application requires measurement of 40 mm movement, highest accuracy achiev-able with HAL 37xy / HAC 37xy

–

Transmission Range Sensor

HAL 373xHAC 373x

Application requires measurement of 40 mm movement, highest accuracy achiev-able with HAL 37xy / HAC 37xy

–

Neutral Gear Position HAL 373x 2D required, because usual detection angle is >180°. Next step will be full gear detection.

HAL 835

Turbo Charger Actuator HAL 37xy HAC 373x

1% full-scale error required by application HAL 835

Product Family

Product Variant

Field Component

Measurement

Red

unda

ncy

Inte

grat

ed C

aps

Package Output Setpoints Errorat Full Temperature Range

Reso lution Response Time

Linear Angular Leaded SMD Min. Max. Remark Typ.

End of Shaft

Off-Axis

up to 60°

up to 180°

up to 360°

HAL 8xy HAL 830 Z • • • TO92UT – • 2 –4% 4% 2) 12 bit 0.9 ms

HAL 835 Z • • • • 2 –1% 1% 2) 0.9 ms

HAL 85x1) Z • • • 32 –1% 1% 2) 0.9 ms

HAC 830 Z • • • • TO92UP • 2 –4% 4% 2) 0.9 ms

HAL 18xy HAL 1820 Z • • TO92UA SOT89 • 2 –6% 6% 2) 10 bit 0.5 ms

HAL 24xy HAL 2420 Z • • TO92UT SOIC8 • 2 –1% 1% 2) 12 bit 0.5 ms

HAL 2425 Z • • • 16

HAL 2455 Z • • • 16

HAR 2425 Z • • • – TSSOP14 • 16

HAR 2455 Z • • • • 16

HAL 28xy HAL 283x Z • • TO92UT – • 2 –1% 1% 2) 12 bit N/A

HAL 2850 Z • • • 2 up to 16 bit N/A

HAL 37xy HAL 3715 X-Y • • TO92UP SOIC8 • • 33 –1.8° 1.8° 3) up to 12 bit 0.5 ms

HAL 3725 X-Y • • • 33

HAL 3726 Y-Z • • • 33

HAL 3727 X-Z • • • 33

HAL 3735 X-Y • • • • 33

HAL 3736 Y-Z • • • • 33

HAL 3737 X-Z • • • • 33

HAR 37xy HAR 3715 X-Y • • • – SOIC8 • • 33

HAR 3725 X-Y • • • • 33

HAR 3726 Y-Z • • • • 33

HAR 3727 X-Z • • • • 33

HAR 3735 X-Y • • • • • 33

HAR 3736 Y-Z • • • • • 33

HAR 3737 X-Z • • • • • 33

HAC 37xy HAC 3715 X-Y • • • TO92UF – • • 33

HAC 3725 X-Y • • • • 33

HAC 3726 Y-Z • • • • 33

HAC 3727 X-Z • • • • 33

HAC 3735 X-Y • • • • • 33

HAC 3736 Y-Z • • • • • 33

HAC 3737 X-Z • • • • • 33

1) 2-wire version available 2) Error in magnetic sensitivity 3) Angle error after CORDIC, valid for ideal sine and cosine magnetic components

Ana

log

Hall_Sensor_Selection_Guide_for_Automotive_Applications_mit_HAC37_ueberarbeitet.indd 6 22.04.2016 10:33:35

2. 센서 타입에 따른 가이드 (TJ = –40...170 °C)

Product Family

Product Variant

Field Component

Measurement

Red

unda

ncy

Inte

grat

ed C

aps

Package Output Setpoints Errorat Full Temperature Range

Reso lution Response Time

Linear Angular Leaded SMD Min. Max. Remark Typ.

End of Shaft

Off-Axis

up to 60°

up to 180°

up to 360°

HAL 8xy HAL 830 Z • • • TO92UT – • 2 –4% 4% 2) 12 bit 0.9 ms

HAL 835 Z • • • • 2 –1% 1% 2) 0.9 ms

HAL 85x1) Z • • • 32 –1% 1% 2) 0.9 ms

HAC 830 Z • • • • TO92UP • 2 –4% 4% 2) 0.9 ms

HAL 18xy HAL 1820 Z • • TO92UA SOT89 • 2 –6% 6% 2) 10 bit 0.5 ms

HAL 24xy HAL 2420 Z • • TO92UT SOIC8 • 2 –1% 1% 2) 12 bit 0.5 ms

HAL 2425 Z • • • 16

HAL 2455 Z • • • 16

HAR 2425 Z • • • – TSSOP14 • 16

HAR 2455 Z • • • • 16

HAL 28xy HAL 283x Z • • TO92UT – • 2 –1% 1% 2) 12 bit N/A

HAL 2850 Z • • • 2 up to 16 bit N/A

HAL 37xy HAL 3715 X-Y • • TO92UP SOIC8 • • 33 –1.8° 1.8° 3) up to 12 bit 0.5 ms

HAL 3725 X-Y • • • 33

HAL 3726 Y-Z • • • 33

HAL 3727 X-Z • • • 33

HAL 3735 X-Y • • • • 33

HAL 3736 Y-Z • • • • 33

HAL 3737 X-Z • • • • 33

HAR 37xy HAR 3715 X-Y • • • – SOIC8 • • 33

HAR 3725 X-Y • • • • 33

HAR 3726 Y-Z • • • • 33

HAR 3727 X-Z • • • • 33

HAR 3735 X-Y • • • • • 33

HAR 3736 Y-Z • • • • • 33

HAR 3737 X-Z • • • • • 33

HAC 37xy HAC 3715 X-Y • • • TO92UF – • • 33

HAC 3725 X-Y • • • • 33

HAC 3726 Y-Z • • • • 33

HAC 3727 X-Z • • • • 33

HAC 3735 X-Y • • • • • 33

HAC 3736 Y-Z • • • • • 33

HAC 3737 X-Z • • • • • 33

1) 2-wire version available 2) Error in magnetic sensitivity 3) Angle error after CORDIC, valid for ideal sine and cosine magnetic components

Ana

log

Mod

ulo

PWM

Sen

t S

AE

J

2716

V 2

010

Hall_Sensor_Selection_Guide_for_Automotive_Applications_mit_HAC37_ueberarbeitet.indd 7 22.04.2016 10:33:35

Magnets SmCo, NeFeB, AlNiCo – Br = 900…1300 mTAll dimensions are given in mm.

D: Diameter,, H: Height, Z: Distance between magnet and the Hall sensor, NL: Non-Linearity, RT: Room Temperature

End of Shaft Type Direct Angle 360°

HAL 3725 HAL 3735

D = 10, H = 2.5, Z = 4NL <±0.25% RT

Off-Axis Type Angle Magnet

HAL 8xy <70° D = 15, H = 6, Z = 2.5NL <±1% RT

HAL 24xy <180° D = 15, H = 6, Z = 2.5NL <±0.15% RT

HAL 37x6 HAL 37x7

360° D = 15, H = 6, Z = 2.5NL <±0.15% RT

Parallel Type 12 mm Distance 20 mm Distance 40 mm Distance

HAL 8xy D = 8, H = 26, Z = 4 NL <±1% RT

D = 8, H = 43, Z = 4 NL <±1% RT

D = 8, H = 86, Z = 4NL <±1% RT

HAL 24xy D = 8, H = 12, Z = 4NL <±0.15% RT

D = 8, H = 20, Z = 4NL <±0.15% RT

D = 8, H = 40, Z = 4NL <±0.15% RT

HAL 37x6 HAL 37x7

D = 6, H = 4, Z = 4NL <±0.15% RT

D = 12, H = 4, Z = 4NL <±0.15% RT

D = 16, H = 8, Z = 4NL <±0.15% RTD

H

Z

Orthogonal Type 12 mm Distance 20 mm Distance 40 mm Distance

HAL 8xy D = 31, H = 6, Z = 4NL <±1% RT

D = 52, H = 6, Z = 4NL <±1% RT

D = 103, H = 6, Z = 4NL <±1% RT

HAL 24xy D = 12, H = 6, Z = 4NL <±0.2% RT

D = 20, H = 6, Z = 4NL <±0.2% RT

D = 40, H = 6, Z = 4NL <±0.2% RT

HAL 37x6 HAL 37x7

D = 6, H = 3, Z = 4NL <± 0.2% RT

D = 10, H = 4, Z = 4NL <±0.2% RT

D = 25, H = 6, Z = 4NL <±0.2% RTH

D

Z

Hall_Sensor_Selection_Guide_for_Automotive_Applications_mit_HAC37_ueberarbeitet.indd 8 22.04.2016 10:33:38

3. 자석 선택 가이드