This document is downloaded from DR‑NTU (https://dr.ntu.edu.sg)Nanyang Technological University, Singapore.

Edge detection from point cloud of worn parts

Nguyen, Keith Wei Liang; Aprilia, A.; Khairyanto, Ahmad; Pang, Wee Ching; Seet, Gerald GimLee; Tor, Shu Beng

2018

Nguyen, K. W. L., Aprilia A., Khairyanto, A., Pang, W. C., Seet, G. G. L., & Tor, S. B. (2018). Edgedetection from point cloud of worn parts. Proceedings of the 3rd International Conferenceon Progress in Additive Manufacturing (Pro‑AM 2018), 595‑600. doi:10.25341/D45C7S

https://hdl.handle.net/10356/88666

https://doi.org/10.25341/D45C7S

© 2018 Nanyang Technological University. Published by Nanyang Technological University,Singapore.

Downloaded on 07 Jan 2022 14:27:12 SGT

595

Proc. Of the 3rd Intl. Conf. on Progress in Additive Manufacturing (Pro-AM 2018) Edited by Chee Kai Chua, Wai Yee Yeong, Ming Jen Tan, Erjia Liu and Shu Beng TorCopyright © 2018 by Nanyang Technological UniversityPublished by Nanyang Technological University ISSN: 2424-8967 :: https://doi.org/10.25341/D45C7S

Chee Kai Chua, Wai Yee Yeong, Ming Jen Tan, Erjia Liu and Shu Beng Tor (Eds.)

596

Proc. Of the 3rd Intl. Conf. on Progress in Additive Manufacturing

597

Chee Kai Chua, Wai Yee Yeong, Ming Jen Tan, Erjia Liu and Shu Beng Tor (Eds.)

598

Proc. Of the 3rd Intl. Conf. on Progress in Additive Manufacturing

599

Chee Kai Chua, Wai Yee Yeong, Ming Jen Tan, Erjia Liu and Shu Beng Tor (Eds.)

600