emos group 3
DESCRIPTION
EMOS Group 3. 組員 :郭柏宏 郭建漢 蕭鼎亞 黃雍文 黃博奕. Current Status Networking. User. Router. User. User. Router. User. Router. User. User. Current Status of Crowded Networking. User. Router. User. User. Router. …. Router. User. User. Motivation. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/1.jpg)
EMOS Group 3
組員:郭柏宏 郭建漢 蕭鼎亞
黃雍文 黃博奕
![Page 2: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/2.jpg)
Current Status Networking
Router
Router
Router
User
User
User
User
User
User
![Page 3: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/3.jpg)
Router
Router
Router
User
User
User
User
User
…
Current Status of Crowded Networking
![Page 4: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/4.jpg)
• 通訊 Bandwidth 浪費在重覆註冊連線上• 階層化 (Hierarchy) 的網路連線與頻寬分配• Web-Browser 的網路 UI• 頻寬分配之監控
Motivation
![Page 5: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/5.jpg)
Concept
Router
Router
Router
User(M)
User
User
User
User
User
User(S)
User(S)
User
User
User
User
User
User
User
…
![Page 6: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/6.jpg)
System BlocksRaspberry Pi
App. & Driver
( 含 Bandwidth monitoring)
![Page 7: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/7.jpg)
HOW ?
![Page 8: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/8.jpg)
技術與人力分工圖
資本主義之共產網路 Router
用 Raspberry Pi 接通網路
(Man X2)
UI & 頻寬監控
(Man x1)
頻寬分享Driver & 程式
(Man X2)
![Page 9: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/9.jpg)
Boot Materials
![Page 10: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/10.jpg)
Boot Materials
![Page 11: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/11.jpg)
存取硬體資源 Driver- by Python
![Page 12: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/12.jpg)
Python
![Page 13: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/13.jpg)
Python
![Page 14: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/14.jpg)
頻寬分配
![Page 15: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/15.jpg)
UI
![Page 16: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/16.jpg)
UI
![Page 17: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/17.jpg)
UI
![Page 18: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/18.jpg)
To monitor the network usage
1. A web server - apache
2. A program language build in Pi - Python
![Page 19: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/19.jpg)
web server
GPIO
Common Gateway
interface
To access the hardware resources, we should use GPIO on Pi to get the information. Then we can monitor the usage of wifi and manage the bandwidth which is shared with users.
![Page 20: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/20.jpg)
Reference
• http://pingbin.com/2012/12/setup-wifi-raspberry-pi/
• http://wwssllabcd.github.io/blog/2013/01/31/how-to-setup-raspberry-pi/
• http://www.maketecheasier.com/set-up-raspberry-pi-as-wireless-access-point/
![Page 21: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/21.jpg)
Source Code: Configure the wireless adapter
• auto lo• • iface lo inet loopback• iface eth0 inet dhcp• • allow-hotplug wlan0• iface wlan0 inet manual• address 192.168.0.100• netmask 255.255.255.0• gateway 192.168.0.1• wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
sudo nano /etc/network/interfaces
![Page 22: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/22.jpg)
Source Code: Install and configure a DHCP server
• subnet 192.168.42.0 netmask 255.255.255.0 {• range 192.168.42.10 192.168.42.50;• option broadcast-address 192.168.42.255;• option routers 192.168.42.1;• default-lease-time 600;• max-lease-time 7200;• option domain-name "local";• option domain-name-servers 8.8.8.8, 8.8.4.4;• }
sudo apt-get install isc-dhcp-serversudo nano /etc/dhcp/dhcpd.conf
sudo nano /etc/default/isc-dhcp-serverChange “INTERFACES=""” to “INTERFACES="wlan0"”
sudo service isc-dhcp-server restart
![Page 23: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/23.jpg)
Source Code: Install and configure the access point daemon
• interface=wlan0• driver=nl80211• #driver=rtl871xdrv• ssid=MyPi• hw_mode=g• channel=6• macaddr_acl=0• auth_algs=1• ignore_broadcast_ssid=0• wpa=2• wpa_passphrase=raspberry• wpa_key_mgmt=WPA-PSK• wpa_pairwise=TKIP• rsn_pairwise=CCMP
sudo apt-get install hostapdsudo nano /etc/hostapd/hostapd.conf
sudo nano /etc/default/hostapdRemove the “#” in front of “DAEMON_CONF” and alter the line to read:DAEMON_CONF="/etc/hostapd/hostapd.conf"
![Page 24: EMOS Group 3](https://reader035.vdocuments.pub/reader035/viewer/2022062305/568147a4550346895db4e0a8/html5/thumbnails/24.jpg)
Source Code: Configure IP routing between the wireless and Ethernet (or 2 Wireless Adapters)
sudo nano /etc/sysctl.confFind the line which reads “Uncomment the next line to enable packet forwarding for IPv4” and uncomment the next line like this:# Uncomment the next line to enable packet forwarding for IPv4net.ipv4.ip_forward=1
Run the following command to activate forwarding now:sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward"Now turn the Pi into a router with the follow commands:sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADEsudo iptables -A FORWARD -i eth0 -o wlan0 -m state --state RELATED,ESTABLISHED -j ACCEPTsudo iptables -A FORWARD -i wlan0 -o eth0 -j ACCEPT( 如果要用兩張網卡一收一發 , 就把 eth0 & wlan0 改成 wlan0 & wlan1)And save the routing tables into the file “/etc/iptables.ipv4.nat”sudo sh -c "iptables-save > /etc/iptables.ipv4.nat”
Edit “/etc/network/interfaces“:sudo nano /etc/network/interfaces
And add the following line to the end of the file. This line will restore the routing table whenever the Pi is booted:pre-up iptables-restore < /etc/iptables.ipv4.nat