engineering graphics ii [week4]
DESCRIPTION
Engineering Graphics II [WEEK4]. การเชื่อม งานเชื่อมใน Solid Work. การเชื่อม (Welding). การเชื่อม. การเชื่อมมีวัตถุประสงค์เพื่อ “ ยึดต่อชิ้นงานอย่างถาวร ” การเชื่อมโลหะที่พบได้โดยทั่วไปประกอบด้วย 6 ประเภทใหญ่ๆ 1. การเชื่อมแก็ส (Gas Welding) 2. การเชื่อมไฟฟ้า (Arc Welding) - PowerPoint PPT PresentationTRANSCRIPT
-
Engineering Graphics II [WEEK4] Solid Work
-
6 1. (Gas Welding)2. (Arc Welding)3. (Press Welding, Resistance Welding)4. TIG (Tungsten Inert Gas Welding)
-
5. MIG (Metal Inert Gas Welding)6. (Submerged Arc Welding)
-
(Filler Metal or Welding rod)
-
(Arc Welding)
-
Press Welding, Resistance Welding, Spot Welding
-
TIG TIG
-
MIG MIG
-
(Granular Flux)
-
: : :
-
L-PS
-
(Fillet Welding)5 mm Leg size(S) 60 mm (L)200 mm (P)
-
(Fillet Welding)
-
(Fillet Welding)
-
(Fillet Welding) (Arrow side) : (Other side) :
-
(Groove or Butt Weld) (a) Square butt weld(b) Single V butt weld(c) Double V butt weld(d) Single bevel
-
(Groove or Butt Weld)(a) T joint(b) U and J weld(c) Corner weld(d) Edge weld
-
(Groove or Butt Weld)
-
(Groove or Butt Weld)
-
< T
-
Annotation -> Weld SymbolWeld Symbol ANSI
-
(Part) Insert -> WeldmentsInsert -> Weldments -> Fillet Bead