english ds150 e win7 user guide v1.0

Download English ds150 e win7  user guide v1.0

Post on 12-Sep-2014

1.613 views

Category:

Technology

0 download

Embed Size (px)

DESCRIPTION

 

TRANSCRIPT

  • Dangerfield January. 2010 V1.0

    Delphi PSS 1

    User Guide for DS150Ewith Win7

  • Dangerfield January. 2010 V1.0

    Delphi PSS 2

    CONTENTS

    Main component.3 Component Activation (OBD)...86

    Installation instructions...5 Write to ECU (OBD).89

    Bluetooth Installation..17 Scan.92

    Configuring Bluetooth.30 History.....97

    Diagnostic Program.42 EOBD Communication..100

    File.44 Read fault codes (EOBD)..103

    Settings46 Erase fault codes (EOBD) 106

    Documents..54 Real Time Data (EOBD).. .109

    Help...56 Freeze Frame Data (EOBD).113

    OBD Communication..59 Oxygen sensor (EOBD)116

    Print and Save...69 Non-continuous Tests (EOBD)..119

    Real Time Data (OBD)..76 Control of System (EOBD)..122

    Adjust Parameters83 Vehicle Information (EOBD)...125

  • Dangerfield January. 2010 V1.0

    Delphi PSS 3

    MAIN COMPONENTS

  • Dangerfield January. 2010 V1.0

    Delphi PSS 4

    Main Components

    Vehicle Communication Interface (V.C.I.)

    Bluetooth dongle

  • Dangerfield January. 2010 V1.0

    Delphi PSS 5

    INSTALLATION INSTRUCTIONS

  • Dangerfield January. 2010 V1.0

    Delphi PSS 6

    Laptop/Tablet Specification

    Recommended: Windows 2000/(XP) Win7 Pentium 800 MHz, or similar USB (optional Bluetooth) 256 MB internal memory 250 MB hard disk space (program size) Resolution: 1024x768, High Colour (16 bits)

    (XP) Service Pack 2 or later

  • Dangerfield January. 2010 V1.0

    Delphi PSS 7

    Introduction: The Rel. 3 software Installation CD1 will load the DS150E diagnostics software.The Belkin Bluetooth software installs from a separate CD

    Instructions: Insert the Delphi Installation CD into the CD Rom drive. Select Start >> RUN and browse for the DS150E.exe file from the CD inserted

    and select OK.

    DS150E Installation Instructions 1

    Click OK and the DS150E install will start. Follow the online screen instructions to install the software

  • Dangerfield January. 2010 V1.0

    Delphi PSS 8

    DS150E Installation Instructions 2

    Select language required

  • Dangerfield January. 2010 V1.0

    Delphi PSS 9

    DS150E Installation Instructions 3

    View system requirements, tick box, then click next

  • Dangerfield January. 2010 V1.0

    Delphi PSS 10

    DS150E Installation Instructions 4

    MissingSelect product, select country,

    click Next

  • Dangerfield January. 2010 V1.0

    Delphi PSS 11

    DS150E Installation Instructions 5

  • Dangerfield January. 2010 V1.0

    Delphi PSS 12

    DS150E Installation Instructions 6

    Choose location, click install

  • Dangerfield January. 2010 V1.0

    Delphi PSS 13

    DS150E Installation Instructions 7

    Drivers must be installed, click O.K.

  • Dangerfield January. 2010 V1.0

    Delphi PSS 14

    DS150E Installation Instructions 8

    Select Install this driver software anyway, click next

  • Dangerfield January. 2010 V1.0

    Delphi PSS 15

    DS150E Installation Instructions 9

    When Installation is complete click next

  • Dangerfield January. 2010 V1.0

    Delphi PSS 16

    DS150E Installation Instructions 10

  • Dangerfield January. 2010 V1.0

    Delphi PSS 17

    BLUETOOTH INSTALLATION

  • Dangerfield January. 2010 V1.0

    Delphi PSS 18

    Bluetooth Installation 1

    Insert Belkin installation CD into CD drive

    Click on Run BelkinBluetooth.exe

    DO NOT insert Belkin Dongle until asked to do so

    ATTENTION! If your computer has a Bluetooth facility, please disable it by referring to your hardware manufacturers manual, before

    installing the Belkin software.The Delphi software is only verified to work with the dongle supplied.

  • Dangerfield January. 2010 V1.0

    Delphi PSS 19

    Bluetooth Installation 2

    Click Install Software and then click next

  • Dangerfield January. 2010 V1.0

    Delphi PSS 20

    Bluetooth Installation 3

    If your computer has a previous version of Widcomm software installed, this box will appear, click O.K.

  • Dangerfield January. 2010 V1.0

    Delphi PSS 21

    Bluetooth Installation 4

  • Dangerfield January. 2010 V1.0

    Delphi PSS 22

    Bluetooth Installation 5

    Insert Belkin Dongle into USB port at this point, then click next

  • Dangerfield January. 2010 V1.0

    Delphi PSS 23

    Bluetooth Installation 6

  • Dangerfield January. 2010 V1.0

    Delphi PSS 24

    Bluetooth Installation 7

  • Dangerfield January. 2010 V1.0

    Delphi PSS 25

    Bluetooth Installation 8

    Click to accept terms, then click next

  • Dangerfield January. 2010 V1.0

    Delphi PSS 26

    Bluetooth Installation 9

  • Dangerfield January. 2010 V1.0

    Delphi PSS 27

    Bluetooth Installation 10

  • Dangerfield January. 2010 V1.0

    Delphi PSS 28

    Bluetooth Installation 11

    When complete click next

  • Dangerfield January. 2010 V1.0

    Delphi PSS 29

    Bluetooth Installation 12

  • Dangerfield January. 2010 V1.0

    Delphi PSS 30

    CONFIGURING BLUETOOTH

  • Dangerfield January. 2010 V1.0

    Delphi PSS 31

    Configuring the Bluetooth 1

    Configuring the BluetoothThe Bluetooth dongle needs to be setup and the DS150E hardware needs to be paired with the Bluetooth dongle, click the arrow icon to open the box, then click the Bluetooth icon.

  • Dangerfield January. 2010 V1.0

    Delphi PSS 32

    Configuring the Bluetooth 2

    Click Open Settings

  • Dangerfield January. 2010 V1.0

    Delphi PSS 33

    Configuring the Bluetooth 3

    UNTICK this box

    Click options

  • Dangerfield January. 2010 V1.0

    Delphi PSS 34

    Configuring the Bluetooth 4

    Click add a device

  • Dangerfield January. 2010 V1.0

    Delphi PSS 35

    Configuring the Bluetooth 5Dongle will search all devices in range NOTE if device has already been loaded it will NOT be displayed below

    Select Delphi device, click next

  • Dangerfield January. 2010 V1.0

    Delphi PSS 36

    Configuring the Bluetooth 6

    Click Enter the devices pairing code,then clicknext

  • Dangerfield January. 2010 V1.0

    Delphi PSS 37

    Configuring the Bluetooth 7

    Enter 0, then click next

  • Dangerfield January. 2010 V1.0

    Delphi PSS 38

    Configuring the Bluetooth 8

    To verify comport click on Devices and Printers

  • Dangerfield January. 2010 V1.0

    Delphi PSS 39

    Configuring the Bluetooth 9

    Select hardware

    Note comport

  • Dangerfield January. 2010 V1.0

    Delphi PSS 40

    Configuring the Bluetooth 10

    1 Click on toolbox icon

    2 Click on gearwheel icon

    Open Delphi DS150E software, click on settings, then hardware setup

    Select Automatic then click Search Icon, if automatic search fails select manually

  • Dangerfield January. 2010 V1.0

    Delphi PSS 41

    Configuring the Bluetooth 11Ensure that com port is identical to the port quoted in page 39, if not select the correct port from the drop down menu.Bluetooth configuration is then complete.Click OK, or update to update firmware .

  • Dangerfield January. 2010 V1.0

    Delphi PSS 42

    DIAGNOSTIC PROGRAM

  • Dangerfield January. 2010 V1.0

    Delphi PSS 43

    Main Diagnostic screen

  • Dangerfield January. 2010 V1.0

    Delphi PSS 44

    FILE

  • Dangerfield January. 2010 V1.0

    Delphi PSS 45

    Opens any saved documents in report folder

  • Dangerfield January. 2010 V1.0

    Delphi PSS 46

    SETTINGS

  • Dangerfield January. 2010 V1.0

    Delphi PSS 47

    Alternative access to Language and Hardware set up

  • Dangerfield January. 2010 V1.0

    Delphi PSS 48

    Alternative access to Workshop and Hardware set up

  • Dangerfield January. 2010 V1.0

    Delphi PSS 49

    Alternative access to Workshop and Language set up

    Click search to find VCI

  • Dangerfield January. 2010 V1.0

    Delphi PSS 50

  • Dangerfield January. 2010 V1.0

    Delphi PSS 51

    A successful connection will result

    in the comport number, serial number of the VCI

    and firmware version being displayed

  • Dangerfield January. 2010 V1.0

    Delphi PSS 52

    After connection for the first time the firmware

    should be updated, follow the on-screen

    instructions

  • Dangerfield January. 2010 V1.0

    Delphi PSS 53

    When completed click O.K.

  • Dangerfield January. 2010 V1.0

    Delphi PSS 54

    DOCUMENTS

  • Dangerfield January. 2010 V1.0

    Delphi PSS 55

    Connects to application file

    Opens notepad

    Shows release news

    Specifies Computer system requirements

  • Dangerfield January. 2010 V1.0

    Delphi PSS 56

    HELP

  • Dangerfield January. 2010 V1.0

    Delphi PSS 57

    Sets hardware to demo mode

    Opens hardware key box

  • Dangerfield January. 2010 V1.0

    Delphi PSS 58

  • Dangerfield January. 2010 V1.0

    Delphi PSS 59

    OBD COMMUNICATION

  • Dangerfield January. 2010 V1.0

    Delphi PSS 60

    Select Brand, Model and model year

  • Dangerfield January. 2010 V1.0

    Delphi PSS 61

    Select type of system and engine code

  • Dangerfield January. 2010 V1.0

    Delphi PSS 62

    Select Gearbox option then click