epson rs academy · epson rs academy 2020 epson deutschland gmbh robotic solutions | rs academy...
TRANSCRIPT
EPSON RS Academy
2020
EPSON Deutschland GmbH
Robotic Solutions | RS Academy
Otto-Hahn-Str. 4 | 40670 Meerbusch
Sales:
Phone: 02159 / 538 – 1800 | [email protected]
http://www.epson.de/robots/
Welcome to the EPSON RS Academy
Dear robot enthusiast,
Thank you for your interest in training at EPSON
ROBOTIC SOLUTIONS ACADEMY.
Our sophisticated training concept gives you the
opportunity to train comprehensively and
effectively as a specialist in Epson robot
technology. A consistently limited number of
participants is a prerequisite for this. Small
groups enable fast and efficient learning for
optimum utilisation of the many options your
Epson robots can offer you.
Besides theoretical knowledge, our training
centre in Meerbusch also includes an extensive
practical component involving real robots.
Practice sessions reinforce what has been
learnt. Our trainers will take adequate time to
answer your questions concisely and accurately.
On request, we can also draw up a complete
training concept tailored to your needs.
Would you like to gain some initial impressions
about automation with Epson robots, or are you
keener to learn more about the performance and
capabilities of the machines? We shall also be
pleased to visit you on site – complete with
robot.
Our sales engineers will be ready to answer
your specific questions and can usually estimate
feasibilities too.
NOT FOUND SUITABLE TRAINING?
That’s no problem for us either! We shall be
pleased to customise training content with you –
so you and your staff can get exactly what you
need.
Your
EPSON Robotic Solutions Team
Our recommendation: For our current schedules, please consult our website at:
http://www.epson.de/robots/
Step by Step to Expert Knowledge
Module P1
Programming Scara
(4 days)
Module B1
Operating Scara
(1 day)
Mo
du
le P
2:
Pro
Six
Pro
gra
mm
ing
(1 d
ay)
Mo
du
le B
V-P
:
Pri
nc
iple
s o
f
Pro
gra
mm
ing
Im
ag
e
Pro
ce
ss
ing
(2 d
ays)
Mo
du
le C
V-P
:
Pro
gra
mm
ing
Co
nve
yo
r T
rac
kin
g
(1 d
ay)
Mo
du
le B
V-B
:
Op
era
tin
g Im
ag
e
Pro
ce
ss
ing
(1 d
ay)
Mo
du
le C
V-B
:
Op
era
tin
g C
on
ve
yo
r
Tra
ck
ing
(1 d
ay)
Mo
du
le W
2-3
Ma
inte
na
nc
e &
Pre
ve
nti
ve
Ma
inte
na
nc
e
(2-3
da
ys,
de
pe
nd
ing
on
mo
du
le)
Mo
du
le S
K
Sim
ula
tor
& D
es
ign
(2 d
ays)
Mo
du
le B
2:
Pro
Six
Op
era
tio
n
(in
co
mb
ina
tio
n w
ith
B1
: 1
da
y)
Mo
du
le F
S:
Pri
nc
iple
s o
f
Pro
gra
mm
ing
Fo
rce
Se
ns
or
(1 d
ay)
EPSON RS ACADEMY
Our recommendation: Our course modules let you shape
your learning content individually so as to cover your requirements
as best as possible.
Important: Please note that the course modules
sometimes build on one another, thus making
participation in the previous module mandatory.
Suitable for system integrators,
programmers, maintenance personnel, ...Suitable for operating staff…
EPSON RC+ Programming Training
Target group:
Models:
Content:
Duration:
Price:
Max. number of participants:
Prerequisites:
Programmer, maintenance personnel
Scara robots of the G / T / LS / RS series as well as 6-axis robots (ProSix)
Controls: RC90 / RC180 / RC700(-A)
▪ Working with RC+ software and the RC+ simulator
▪ Various coordinate systems of the robot
▪ Teaching, editing and calculating positions
▪ Travel commands, commands for palletising
▪ Handling of variables, digital I/O handling, remote functions (Fieldbus)
▪ Program structuring & control, multitasking,
▪ The training offers an interesting alternation between theory and
practical exercises.
Module P1 Scara: 4 days (usually Mon.-Thurs.)
Module P2 ProSix: + 1 extra day (Friday)
Module P1 Scara: 1.640 euros / person for 4 days
Module P2 ProSix: 2.050 euros / person for 5 days
8 participants
Basic knowledge of a high-level programming language such as BASIC, C++
or experience in PLC programming
The participant will acquire advanced user knowledge of RC+ programming on the EPSON
robot control and can develop and independently implement applications from the handling
technology.
All participation fees apply for our training centre in Meerbusch plus statutory VAT. Lunch and drinks are included in the participation fees.
Our recommendation: Bring your own laptop
to the training. You can install the software directly at us –
so can have your work tool ready for use straight away.
Course module
P1+2
For your information: The additional day for the ProSix
series can also be booked as a single course day.
EPSON VisionGuide for Programmers
Target group:
Models:
Content:
Duration:
Price:
Max. number of participants:
Prerequisites:
Programmer, maintenance personnel
CV1 / CV2
▪ Principles of image processing
▪ Introduction to hardware
▪ Settings in EPSON RC+
▪ Use of various tools (Blob, Correlation, Geometric)
▪ Calibration of a stationary camera
▪ Programming (VRUN, VGET, VSET)
▪ The training offers an interesting alternation between theory and
practical exercises.
2 days
820 euros / person
4 participants
Course module P1 "RC+ Programming Training"
Participants acquire basic knowledge of EPSON image processing for commissioning,
programming and calibration.
All participation fees apply for our training centre in Meerbusch plus statutory VAT. Lunch and drinks are included in the participation fees.
Our recommendation: Bring your own laptop
to the training. You can install the software directly at
us so can have your work tool ready for use straight away.
Course module
BV-P
EPSON RC+ ConveyorTracking for Programmers
Target group:
Content:
Duration:
Price:
Max. number of participants:
Prerequisites:
Programmer, maintenance personnel
▪ Introduction to hardware
▪ Settings in EPSON RC+
▪ Explanation of sensor tracking and camera tracking
▪ Calibrating a camera outside the robot working area
▪ Calibrating a conveyor tracking system
▪ Programming commands
▪ Program examples for sensor tracking and camera tracking
▪ The training offers an interesting alternation between theory and
practical exercises.
1 day
410 euros / person
4 participants
Course module P1 "RC+ Programming Training" plus
Course module BV-P "EPSON VisionGuide for Programmers"
Participants acquire basic knowledge for commissioning, programming and calibrating
the conveyor tracking system in conjunction with the EPSON VisionGuide image processing.
All participation fees apply for our training centre in Meerbusch plus statutory VAT. Lunch and drinks are included in the participation fees.
Our recommendation: Bring your own laptop
to the training. You can install the software directly at us –
so can have your work tool ready for use straight away.
Course module
CV-P
EPSON RC+ Simulator/Design Training
Target group:
Models:
Content:
Duration:
Price:
Max. number of participants:
Prerequisites:
Project planning, design (mechanics & electrics)
Scara robots of the G / T / LS / RS series as well as 6-axis robots (ProSix)
Controls: RC90 / RC180 / RC700(-A)
▪ Presentation of the main components in the robot system and kinematic
structure of the manipulator
▪ Aspects of safety technology and accident prevention
▪ Working with the simulator
▪ Explanation of the fundamental commands for motion control with the
most important additional functions
▪ Mechanical structure of a robot cell
▪ Exercises on the content learned
2 days
820 euros / person
8 participants
None
Participants acquire basic knowledge in working with the RC+ programming software,
robot principles as well as basic recommendations for designing a robot cell.
All participation fees apply for our training centre in Meerbusch plus statutory VAT. Lunch and drinks are included in the participation fees.
Our recommendation: Bring your own laptop
to the training. You can install the software directly at us
– so can have your work tool ready for use straight away.
Course module
SK
EPSON Maintenance Training 2-day
Target group:
Models:
Content:
Duration:
Price:
Max. number of participants:
Prerequisites:
Maintenance, system operator, control system, installation and commissioning,
design and mechanics
Scara robots of the G / T / LS /LS-B / RS series
Controls: RC90(-B) / RC180 / RC700(-A)
▪ Presentation of the components in the robot system and kinematic structure
of the manipulator
▪ Aspects of safety technology and accident prevention
▪ Explanation of the basic commands for motion control
▪ Various options for setting up room points
▪ Maintenance of the robot control on the module level
▪ Maintenance of the manipulator including disassembly of the most
important components
▪ Calibrating the robot system
▪ Error diagnostics and contacting EPSON Support
2 days
820 euros per person
5 participants
None
Participants can correctly commission the EPSON robot system with the robot control as
well as plan maintenance measures on the manipulator and control and carry out repairs
independently.
All participation fees apply for our training centre in Meerbusch plus statutory VAT. Lunch and drinks are included in the participation fees.
Course module
W2
EPSON Maintenance Training 3-day
Target group:
Models:
Content:
Duration:
Price:
Max. number of participants:
Prerequisites:
Maintenance, system operator, control system, installation and commissioning,
design and mechanics
Scara robots of the G / T / LS /LS-B / RS series
Controls: RC90(-B) / RC180 / RC700(-A)
▪ Presentation of the components in the robot system and kinematic structure
of the manipulator
▪ Aspects of safety technology and accident prevention
▪ Explanation of the basic commands for motion control
▪ Various options for setting up room points
▪ Maintenance of the robot control on the module level
▪ Maintenance of the manipulator including disassembly of the most
important components
▪ Calibrating the robot system
▪ Error diagnostics and contacting EPSON Support
3 days
1.230 euros per person
5 participants
None
Participants can correctly commission the EPSON robot system with the robot control as
well as plan maintenance measures on the manipulator and control and carry out repairs
independently.
All participation fees apply for our training centre in Meerbusch plus statutory VAT. Lunch and drinks are included in the participation fees.
Course module
W3
Your advantage: We train two systems in one:
thus e.g. G series and RS series training can be organised
as a single training session. Your saving: One training day
per participant.
EPSON Operator Training
Target group:
Models:
Content:
Duration:
Price:
Max. number of participants:
Prerequisites:
System operators adjustment technicians, installation and commissioning,
technical sales
Scara robots of the G / T / LS(B) / RS series as well as 6-axis robots (ProSix)
Controls: RC90 / RC90-B / RC180 / RC700(-A)
▪ Presentation of the main components in the robot system (control and
manipulator)
▪ Aspects of safety technology and accident prevention
▪ Explanation of the coordinate system
▪ Teaching points and travel commands
▪ Operating the robot with teach pendant and operation panel
▪ Information on recommended activities (backup, reference point and
maintenance)
1 day
410 euros per person
6 participants
None
Participants can safely operate an Epson robot system, teach room points, log and rectify
simple faults.
All participation fees apply for our training centre in Meerbusch plus statutory VAT. Lunch and drinks are included in the participation fees.
Course module
B1
EPSON VisionGuide for Operators
Target group:
Models:
Content:
Duration:
Price:
Max. number of participants:
Prerequisites:
Maintenance personnel
CV1 / CV2
▪ Principles of image processing
▪ Introduction to hardware
▪ Settings in EPSON RC+
▪ Replacing components
▪ Calibration of a stationary camera
▪ The training offers an interesting alternation between theory and practical
exercises.
1 day
410 euros / person
4 participants
Course course module B1 "EPSON RS Operator Training"
Participants acquire basic knowledge of EPSON image processing for maintaining, repairing
and commissioning the system.
All participation fees apply for our training centre in Meerbusch plus statutory VAT. Lunch and drinks are included in the participation fees.
Our recommendation: Bring your own laptop
to the training. You can install the software directly at us –
so can have your work tool ready for use straight away.
Course module
BV-B
EPSON RC+ ConveyorTracking for Operators
Target group:
Content:
Duration:
Price:
Max. number of participants:
Prerequisites:
Maintenance personnel
▪ Introduction to hardware
▪ Settings in EPSON RC+
▪ Explanation of sensor tracking and camera tracking
▪ Calibrating a camera outside the robot working area
▪ Calibrating a conveyor tracking system
▪ The training offers an interesting alternation between theory and practical
exercises.
1 day
410 euros / person
4 participants
Course module B1 "EPSON RS Operator Training" plus
Course module BV-B "EPSON VisionGuide for Operators"
Participants acquire basic knowledge for repairing, replacing and calibrating the conveyor
tracking system in conjunction with the EPSON VisionGuide image processing.
All participation fees apply for our training centre in Meerbusch plus statutory VAT. Lunch and drinks are included in the participation fees.
Our recommendation: Bring your own laptop
to the training. You can install the software directly at us –
so can have your work tool ready for use straight away.
Course module
CV-B
Our small print
REGISTRATION
Registrations and cancellations must be made in
writing. Please use the attached form for this:
Epson Deutschland GmbH
Robotic Solutions
Otto-Hahn-Straße 4
D-40670 Meerbusch
Tel.: +49 (0) 21 59 / 538 1800
Fax: +49 (0) 21 59 / 538 3170
Email: [email protected]
Or visit the website of our EPSON RS Academy
at: https://www.epson.de/robots/
A reservation can only be made after presenting
the written order. We reserve the right to
postpone the courses offered if the number of
participants is too small (< 3 participants), even
after confirmation of registration.
A cancellation on your part must be submitted in
writing to the above address. The processing fee
is 20% of the course fees in the event of a
cancellation up to 14 days before the start of the
course. After this, the cancellation fee will be 50%
of the course fee. You naturally have the option of
appointing a substitute participant free of charge.
The participation fees include:
▪ Training
▪ Training documents
▪ Lunch
▪ Drinks
Arrival and departure costs as well as any hotel
expenses must be borne by the participant.
The training documents will be handed out at the
start of the course and cannot be sent in
advance. You can find a list of convenient hotels
that can be booked in the attachment.
Unfortunately, the course schedules might also
occur during the period of the Messe Düsseldorf
trade fair. We therefore recommend making a
hotel reservation as early as possible.
After completing a course, the participant’s
qualification will be confirmed with a certificate.
To enable participants to arrive on the first day of
the course, the courses will begin at 9:30 am.
The following days will then start from 9 am
onwards. The course day usually ends between 4
pm and 5 pm.
We shall be pleased to adapt the course duration
on the arrival day after discussion and agreement
with participants so as to ensure a relaxed arrival.
How to get to the EPSON RS Academy
From motorway junction
“Meerbusch”:
At Meerbusch junction take the A44
towards Krefeld South / Aachen. Turn off
at the next exit “Osterath / Fischeln”.
Turn left into Kölner Straße. At the next
traffic lights, turn left into Otto-Hahn-
Straße. After about 200 m you will find us
on the right side of the road.
Coming from Cologne:
Follow the A57 motorway towards
Krefeld. At motorway junction
“Meerbusch” please read further -“From
motorway junction Meerbusch“.
Coming from Aachen:
Take the A44/46 motorway at junction
“Neuss West”. Continue on the A57
motorway towards Krefeld as far as
motorway junction “Meerbusch”. At
motorway junction “Meerbusch” please
read further -“From motorway junction
Meerbusch“.
Coming from Frankfurt/Stuttgart:
Follow the A3 motorway as far as junction
“Leverkusen” Change to motorway ring
“Cologne” there. Continue as far as motorway
junction “Köln Nord”. Then please read
further -“Coming from Cologne”.
Coming from the north:
Follow the A2 as far as motorway junction
“Moers” and then via the A57 motorway
towards Krefeld as far as motorway junction
“Meerbusch”. Then please read further -
“From motorway junction Meerbusch“.
Coming from Kassel, Paderborn:
Follow the A1 motorway as far as junction
“Wuppertal” Turn off onto the A46 motorway
towards Düsseldorf. At motorway junction
“Neuss Süd” turn onto the A57 motorway,
towards Krefeld. Continue as far as motorway
junction “Meerbusch”. Then please read
further -“From motorway junction
Meerbusch“.
Registration for the EPSON Robot Training
Please fill out this form fully and send it by fax to:
++49 (0) 2159 – 538 3170 or by email to [email protected]
Your data
Company:…………………………………………………………………………………………
…..
Address:………………………………………………………………………………………….
Phone:……………………………… Fax:……………..…………….Department:…………….
You order number:…………………………………………………………………………….
Your email address (important for the confirmation)
…………………………………………………………………………………………………….
Booked training
Programming Training G/LS/RS/T3 Series/ Extra day 6-axle *)
Control RC90/RC180/ RC620/RC700-A *)
Repair and Maintenance Training SCARA: G3 Series /G6/G10/G20 Series/ RS Series/ LS Series / T3
Series *)
Control RC90/RC180/ RC620/RC700-A *)
Maintenance Training ProSix : C3 / C4 Series / C8 Series / S Series / Control RC180/ RC620/RC700-A *)
Optional Training Image Processing (Vision) Programmers Maintenance
Optional Training Conveyor Tracking Programmers Maintenance
Operator Training G/LS/RS Series with Control RC90/RC180/ RC620/RC700-A *)
Simulator / Designer Training
* Please indicate robot and control type (underline robot type above)
Training schedules
Beginning:……………………… End:………………............….CW:……….…………..….
Names of participants
Family name First name Company Position
Date and signature
□
□
□
□
□
□
□
□
□ □
□
Hotel recommendation: Gästehaus Münks
Gästehaus Münks
Krefelder Straße 71
40670 Meerbusch
Tel.: ++49 (0)2159 / 52 07 80
Fax: ++49 (0)2159 / 52 07 815
www.gaestehaus-muenks.de
Distance from Epson: about 2 min (car)
Single room guide price: approx. 70-80 euros
Hotel recommendation: Gästehaus Meererbusch
Gästehaus Meererbusch
Hindenburgstraße 4
D-40667 Meerbusch/Büderich
Phone: +49 (0) 21 32 / 93 34 - 00
Email: [email protected]
http://www.gaestehaus-meererbusch.de/
Distance from Epson: about 10-15 min (car)
Single room guide price: approx. 90-110 euros
Hotel recommendation: Park Inn
Park Inn - Düsseldorf-Kaarst
Königsberger Str. 20
41564 Düsseldorf-Kaarst
Tel.: ++49 (0)2131 / 969- 0
Fax: ++49 (0)2131 / 969 -4 45
www.park-inn-duesseldorf-kaarst.de
Distance from Epson: about 15 min (car)
Single room guide price: approx. 90-100
euros
Directions
Arriving from Düsseldorf Airport
A44 towards Mönchengladbach as far as junction Meerbusch,
turn onto the A57 towards Cologne, then leave at exit
Holzbüttgen. At the exit, turn right at the end of the lane. At Ikea
(Girmes-Kreuz-Straße) turn right again. Stay on this road and
at the 2. road (Königsberger Straße) turn right again. At the end
of the road you will see the Park Inn Düsseldorf/Kaarst on the
left.
Arriving from Oberhausen or Essen
A52 towards Düsseldorf as far as junction Neerseen, turn off
onto the A44 towards Mönchengladbach. Continue along this
and at junction Meerbusch turn onto the A57 towards Cologne,
then leave at exit Holzbüttgen. At the exit, turn right at the end
of the lane. At Ikea (Girmes-Kreuz-Straße) turn right again.
Stay on this road and at the 2. road (Königsberger Straße) turn
right again. At the end of the road you will see the Park Inn
Düsseldorf/Kaarst on the left.
Hotel recommendation: Tryp Hotel
Tryp Hotel
Europapark Fichtenhain A1
47807 Krefeld
Tel.: ++49 (0)2151 / 836- 0
Fax: ++49 (0)2151 / 836 -444
www.tryphotels.com
Distance from Epson: about 5 min
(car)
Guide price unit: approx. 95-110 euros
Directions
Arrival by car
A 44 Kassel - Aachen, exit Krefeld-Fichtenhain, after
about 0.4 km at the 1. junction with traffic on the right.
Arrival from Düsseldorf International Airport:
Follow the 44 towards Mönchengladbach, then take
exit Krefeld Fichtenhain. At the next junction with
traffic lights turn right towards Fischeln. The TRYP
Hotel Düsseldorf - Krefeld is located on the right.
Hotel recommendation: Mercure Düsseldorf Kaarst
Mercure Düsseldorf Kaarst
Mercure Hotel Düsseldorf Kaarst
Königsberger Straße 20
41564 Kaarst
Germany
T: +49 2131 969-0
F: +49 2131 969-445
https://www.mercure-hotel-duesseldorf-kaarst.de/
Distance from Epson: about 10 min (car)
Guide price unit: approx. 85-110 euros
Hotel recommendation: Hotel Düsseldorf Krefeld
Hotel Düsseldorf Krefeld
Hotel Düsseldorf Krefeld
(Hotelgruppe Melia Hotels & Resorts)
Europark Fichtenhain A1-D
47807 Krefeld
Germany
T: +49 215 1836 - 0
F: +49 215 1836 - 444
https://www.melia.com/de/hotels/deutschland/dusseld
orf/dusseldorf-krefeld-hotel/index.htm
Distance from Epson: about 10 min (car)
Guide price unit: approx. 60-100 euros