et200s - im151-7f cpu product information
TRANSCRIPT
SIMATIC07.2004
IM 151-7 F-CPU, 6ES7 151-7FA01-0AB0, as of Firmware V2.1
������������ ���������
Technische Änderungen vorbehaltenTechnical data subject to changeSous réserve de modifications
Siemens Aktiengesellschaft
CopyrightCopyright Siemens AG 2004. All Rights ReservedWeitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts ist nicht gestat-tet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadensersatz. AlleRechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung.
CopyrightCopyright Siemens AG 2004. All Rights ReservedThe reproduction, transmission or use of this document or its contents is not permitted without express writ-ten authority. Offenders will be liable for damages. All rights, including rights created by patent grant or re-gistration of a utility model or design, are reserved.
CopyrightCopyright Siemens AG 2004. Tous droits réservésToute communication ou reproduction de ce support d’information, toute exploitation ou communication deson contenu sont interdites, sauf autorisation expresse. Tout manquement à cette règle est illicite et ex-pose son auteur au versement de dommages et intérêts. Tous nos droits sont réservés, notamment pour lecas de la délivrance d’un brevet ou celui de l’enregistrement d’un modèle d’utilité.
������������ ���������
Technische Änderungen vorbehaltenTechnical data subject to changeSous réserve de modifications
Siemens Aktiengesellschaft A5E00169369-03
3Product Information on IM 151-7 F-CPUA5E00169369-03
Product Information on
07.2004
IM 151-7 F-CPU, 6ES7 151-7FA01-0AB0, as of Firmware V2.1
DeutschDiese Produktinformation enthält wichtige Informationen zu 6ES7 151-7FA01-0AB0. Sie ist als separaterBestandteil aufzufassen und in Zweifelsfällen in der Verbindlichkeit anderen Aussagen in Handbüchernund Katalogen übergeordnet.
Gültigkeitsbereich dieser Produktinformation
Diese Produktinformation ist gültig für die IM 151-7 F-CPU mit der Bestellnummer 6ES7 151-7FA01-0AB0 ab dem Hardware-Erzeugnisstand 01 und der Firmware-Version V2.1.4.
In dieser Produktinformation beschreiben wir Ihnen die Spezifika der IM 151-7 F-CPU mit derBestellnummer 6ES7 151-7FA01-0AB0 im Vergleich zur IM 151-7 CPU mit der Bestellnum-mer 6ES7 151-7AA10-0AB0. Weitere Informationen zu der IM 151-7 CPU finden Sie im zu-gehörigen Handbuch, Ausgabe 07/2003 im Dokumentationspaket 6ES7151-1AA00-8AA0,welches Sie zusätzlich zu dieser Produktinformation benötigen.
Einsatzgebiete
Haupteinsatzgebiete der IM 151-7 F-CPU sind Personen- und Maschinenschutz und Brennersteuerungen. Neben dem Sicherheitsprogramm können Sie auch Standard-Anwendungen programmieren.
Sie möchten die IM 151-7 F-CPU einsetzen für dann benötigen Sie
Anwendungen der Sicherheitstechnik STEP 7 ab Version 5.2 + Servicepack 1 + HW-Update
Optionspaket S7 Distributed Safety ab V 5.2 + Servicepack 2
Standard-Anwendungen STEP 7 ab Version 5.2 + Servicepack 1 + HW-Update
4Product Information on IM 151-7 F-CPU
A5E00169369-03
Integrierter Arbeitsspeicher
In der IM 151-7 F-CPU mit der Bestellnummer 6ES7 151-7FA01-0AB0 stehen max. 96 KBytefür das Sicherheitsprogramm zur Verfügung. Davon sind max. 64 KByte für das Standard-Anwenderprogramm nutzbar. 64 KByte sind remanent.
Nummernband für FBs/FCs
In der IM 151-7 F-CPU mit der Bestellnummer 6ES7 151-7FA01-0AB0 ist das Nummernbandfür FBs/FCs auf 0 bis 2047 erweitert. Die maximal mögliche Anzahl FBs, FCs und DBs be-trägt insgesamt 1024.
Spezielles Handling bei der Funktion “RAMtoROM”:
Datenbausteine des Sicherheitsprogramms werden nicht vom Arbeitsspeicher in den Lade-speicher kopiert.
Einschränkungen bei SFC 22 “CREAT_DB”, SFC 23 ”DEL_DB” und SFC 82 “CREA_DBL”
F-DBs können weder erzeugt noch gelöscht werden.
Einschränkungen bei SFC 82 “CREA_DBL”
Der Parameter ATTRIB, Bit NON_RETAIN ist nicht einstellbar.
Einschränkung bei SFC 83 “READ_DBL” und SFC 84 “WRIT_DBL”
Die Zieladresse darf nicht auf einen F-DB zeigen.
5Product Information on IM 151-7 F-CPUA5E00169369-03
Versagenswahrscheinlichkeiten
Nachfolgend erhalten Sie die Werte für die Versagenswahrscheinlichkeit der IM 151-7 F-CPU.
Betrieb im geringen
Anforderungsmodus
low demand mode (ave-rage probability of failureon demand)
Betrieb im häufigen
Anforderungs- oder
kontinuierlichen Modus
high demand/continuousmode (probability of adangerous failure perhour)
Proof-Test-
Intervall
F-fähige IM 151-7 F-CPU
6ES7 151-7FA01-0AB0
1,59E-05 3,62E-10 10 Jahre
Ausführungszeiten der F-Applikationsbausteine und der F-FUP/F-KOP-Elemente
Die Ausführungszeiten der F–Applikationsbausteine und der F-FUP/F-KOP-Elemente für dieIM 151-7 F-CPU mit der Bestellnummer 6ES7 151-7FA01-0AB0 entnehmen Sie bitte demInternet:
http://www4.ad.siemens.de/ww/view/de/
unter der Beitrags-ID 19138505.
Verzögerung des Anwenderprogramms bei Stationsausfall des DP-Masters
Beachten Sie bitte beim Einsatz der IM 151-7 F-CPU als I-Slave Folgendes: Ein Stationsausfall des DP-Masters (z. B. durch Leitungsunterbrechung der PROFIBUS-Verbindung) kann die Bearbeitung des Anwenderprogramms im I-Slave durch die Fehlerbe-handlung um bis zu 20 ms verlängern.
6Product Information on IM 151-7 F-CPU
A5E00169369-03
EnglishThis Product Information contains additional information about 6ES7151-7FA01-0AB0. It is a separate component and should be considered more up-to-date than the information in the manuals and catalogs ifuncertainties arise.
Validity of this Product Information
This product information is valid for IM 151-7 F-CPU with order number 6ES7 151-7FA01-0AB0, as of hardware release 01 and Firmware V2.1.4.
This product information describes the essentials of IM 151-7 F-CPU with order number6ES7 151-7FA01-0AB0 compared to IM 151-7 CPU with order number 6ES7 151-7AA10-0AB0. You will find more information on IM 151-7 CPU in the correspon-ding manual of the 6ES7151-1AA00-8BA0, edition 07/2003, documentation package, whichyou require in addition to this product information.
Areas of Application
IM 151-7 F-CPU is mainly designed for personal and machine safety and burner controls. Inaddition to the safety program, you can also program standard applications.
You intend to use IM 151-7 F-CPU for then you require
Safety-related systems STEP 7 as of version 5.2 + Servicepack 1 + HW-Update
Optional package S7 Distributed Safety as of V 5.2+ Servicepack 2
Standard applications STEP 7 as of Version 5.2 + Servicepack 1 + HW-Update
Integrated Memory
In the IM 151-7 F-CPU, order number 6ES7 151-7FA01-0AB0, there is a maximum of 96Kbytes available for the safety program, of which a maximum of 64 Kbytes are usable for thestandard user program, and 64 Kbytes are retained.
Band of Numbers for FBs/FCs
In the IM 151-7 F-CPU, order number 6ES7 151-7FA01-0AB0, the band of numbers for FBs/FCs from 0 to 2047 has been extended. The maximum possible amount of FBs, FCs andDBs together is 1024.
Special Handling of the “RAMtoROM” Function
Data blocks of the safety-related program are not copied to the load memory by the workmemory.
7Product Information on IM 151-7 F-CPUA5E00169369-03
Restrictions with SFC 22 “CREAT_DB”, SFC 23 ”DEL_DB” and SFC 82 “CREA_DBL”
F-DBs can neither be created nor deleted.
Restrictions with SFC 82 “CREA_DBL”
The parameter ATTRIB, Bit NON_RETAIN cannot be set.
Restrictions with SFC 83 “READ_DBL” and SFC 84 “WRIT_DBL”
The target address may not point to an F-DB.
Probabilities of Failure
Below are the values for the IM 151-7 F-CPU probabilities of failure
Low Demand Mode of
Operation
low demand mode (ave-rage probability of failureon demand)
High Demand
Continuous Mode of
Operation
high demand/continuousmode (probability of adangerous failure perhour)
Proof Test
Interval
F-compatible IM 151-7F-CPU
6ES7 151-7FA01-0AB0
1.59E-05 3.62E-10 10 years
Execution times of the F application blocks and the F FBD/F LAD elements
For more information on the execution times of the F application blocks and the F FBD/FLAD elements for IM 151-7 F-CPU with order number 6ES7 151-7FA01-0AB0, please visitour website at:
http://www4.ad.siemens.de/ww/view/en/
under topic ID 19138505.
Delay in the User Program During Station Failure of the DP Master
Please take note of the following while using the IM 151-7 F-CPU as an I-slave: A station failure of the DP master (e.g. because of a line break in the PROFIBUS connection)can prolong the processing of the user program in I slave up to 20 ms due to error handling.
8Product Information on IM 151-7 F-CPU
A5E00169369-03
FrançaisCette Information produit contient des indications importantes concernant 6ES7151-6FA01-0AB0. Elle constitue un document séparé et, en cas de doute, elle doit être considérée comme prioritaire par rapportaux indications figurant dans les manuels et catalogues.
Domaine de validité de cette information produit
Cette information produit est valable pour la IM 151-7 F-CPU avec le numéro de référence 6ES7 151-7FA01-0AB0 à partir de la version du matériel 01 et de la version du FirmwareV2.1.4.
Cette information produit décrit les spécificités de l’IM 151-7 F-CPU ayant comme numéro deréférence 6ES7 151-7FA01-0AB0 en comparaison de l’IM 151-7 CPU ayant comme numérode référence 6ES7 151-7AA10-0AB0. Vous trouverez la description de l’IM 151-7 CPU dansle manuel correspondant dans le pack de documentation 6ES7151-1AA00-8CA0 édition07/03 dont vous aurez besoin en plus de cette information produit.
Champs d’application
Les principaux champs d’application de l’IM 151-7 F-CPU sont la sécurité des personnes etdes machines ainsi que la commande de brûleurs. Outre le programme de sécurité, vouspouvez programmer des applications standard.
Pour utiliser la IM 151-7 F-CPU dans des ... vous avez besoin de
applications de sécurité STEP 7 à partir de la version 5.2 + Servicepack 1 +HW-Update
Logiciel optionnel S7 Distributed Safety à partir dela version V 5.2 + Servicepack 2
applications standard STEP 7 à partir de la version 5.2 + Servicepack 1 +HW-Update
Mémoire de travail intégrée
Vous disposez dans l’IM 151-7 F-CPU référencée 6ES7 151-7FA01-0AB0 de 96 Ko maxpour le programme de sécurité. 64 Ko peuvent être utilisés pour le programme utilisateurstandard, 64 Ko sont rémanents.
Plage de numéros pour FB/FC
Pour l’IM 151-7 F-CPU référencée 6ES7 151-7FA01-0AB0, la plage de uméros pour FB/FCa été étendue de 0 à 2047. Le nombre maximal de FB, FC et DB est de 1024.
Cas particulier de la fonction “RAMtoROM” :
Les blocs de données du programme de sécurité ne sont pas copiés de la mémoire de travail vers la mémoire de chargement.
9Product Information on IM 151-7 F-CPUA5E00169369-03
Restrictions pour les SFC 22 “CREAT_DB”, SFC 23 ”DEL_DB” et SFC 82 “CREA_DBL”
Les blocs de données F ne peuvent être ni générés ni effacés.
Restriction pour la SFC 82 “CREA_DBL”
Il est impossible de régler le paramètre ATTRIB, Bit NON_RETAIN.
Restrictions pour les SFC 83 “READ_DBL” et SFC 84 “WRIT_DBL”
L’adresse de destination ne peut pas être celle d’un bloc de données F.
Probabilités de défaillances
Le tableau suivant indique les probabilités de défaillances de la IM 151-7 F-CPU :
Fonctionnement en
mode demande faible
low demand mode (ave-rage probability of failureon demand)
Fonctionnement en
mode demande élevée
high demand/continuousmode (probability of adangerous failure perhour)
Proof-Test-
Intervall
CPU IM 151-7 F-CPU
6ES7 151-7FA01-0AB0
1,59E-05 3,62E-10 10 ans
Temps d’exécution des blocs d’application F et des éléments LOG F/CONT F
Vous trouvez les temps d’exécution des blocs d’application F et des éléments LOG F/CONTF pour la IM 151-7 F-CPU référencée 6ES7 151-7FA01-0AB0 sur Internet
http://www4.ad.siemens.de/ww/view/fr/
sous le numéro de contribution 19138505.
Allongement du programme utilisateur en cas de défaillance de la station du maître DP
Tenez compte de ce qui suit lors de l’utilisation d’une IM 151-7 F comme esclave intelligent : Une défaillance de la station du maître DP (par exemple due à une rupture de fil de la liaisonPROFIBUS) peut entraîner un allongement pouvant aller jusqu’à 20 ms de l’exécution duprogramme utilisateur dans l’esclave I dû au traitement des erreurs.
10Product Information on IM 151-7 F-CPU
A5E00169369-03