ethylene glycol monobutyl etehr, butyl glycol, butyl cellosolve, , 2-butoxy ethanol
TRANSCRIPT
8/12/2019 Ethylene Glycol Monobutyl Etehr, Butyl Glycol, Butyl Cellosolve, , 2-Butoxy Ethanol
http://slidepdf.com/reader/full/ethylene-glycol-monobutyl-etehr-butyl-glycol-butyl-cellosolve-2-butoxy 1/2
8/7/2014 Ethylene Glycol Monobutyl Etehr, Butyl Glycol, Butyl Cellosolve, , 2-Butoxy Ethanol
http://www.advancepetro.com/egmbe.htm
Home | About us | Products | Contact us | Feedback | FAQ
Ethylene Glycol Monobutyl Ether - EGMBE
Ethylene Glycol Monobutyl Ether. is versatile solvent of product obtains by reaction betweeen
ethylene oxide and n-Butanol. Ethylene Glycol Monobutyl Ether is chemically known as a Butyl Glycol,
1-n-Butoxy-2-hydroxyethane, n-butyl (2-hydroxyethyl) ether. Commercially it is known as a Butyl
Cellosolve, which is a trademark of Union Carbide. ADVANCE PETROCHEMICALS LTD. is selling
this product in brand name APISOLVE 118.
Applications:
Butyl Glycol (2-Butoxy Ethanol) is employed primarily in the production of lacquers based on
nitrocellulose, cellulose ethers and chlorinated rubber. Small quantities are also used combination
lacquers. Solutions of nitrocellulose in Butyl Glycol may be diluted with large quantity of white spirit,
aromatic hydrocarbons or ethanol without adversely affecting the film property. Small quantities of
Ethylene Glycol Monobutyl Ether improves both the flow and dilution capacity of the lacquers and also
enhance the gloss of the resultant lacquer films.
Since Butyl Glycol (2-Butoxy Ethanol) dries lacquer coatings very slowly, it is ideal for the preparation
of brushing lacquers based on cellulose esters, cellulose ethers and chlorinated rubber. Even quite small
additions of Butyl Glycol (2-Butoxy Ethanol) to alkyd, the viscosity of the lacquer solution considerably
reduce, thereby improving the brush-out property of such lacquers.
2-Butoxy Ethanol is a good intermediate solvent for use in mineral oil emulsion. Even small quantities
of Butyl Glycol (2-Butoxy Ethanol) can disperse and stabilize such emulsion quite effectively.
APISOLVE 118 does not attack rubber.
Specification:
PRODUCT APISOLVE 118
Chemical Composition Ethylene Glycol Monobutyl Ether (EGMBE)
Chemical Formula C6H14O2
Cas No. 111-76-2
Appearance Clear, bright and free from solid matter
Colour, Platinum-Cobalt 10.0 Max.
Specific Gravity 20/20 ºC 0.900 - 0.904
Distillation
Initial Boiling Point
Dry Point
167.0 ºC Min.
173.0ºC Max.
PH of 25% solution in water 25 ± 2 ºC 6.0 to 7.5
Flash Point (ºC) 61ºC Min
Water Content % 0.2 Max.
8/12/2019 Ethylene Glycol Monobutyl Etehr, Butyl Glycol, Butyl Cellosolve, , 2-Butoxy Ethanol
http://slidepdf.com/reader/full/ethylene-glycol-monobutyl-etehr-butyl-glycol-butyl-cellosolve-2-butoxy 2/2
8/7/2014 Ethylene Glycol Monobutyl Etehr, Butyl Glycol, Butyl Cellosolve, , 2-Butoxy Ethanol
http://www.advancepetro.com/egmbe.htm
Molecular Weight 118.11
Acidity % w/w (as Acetic Acid) 0.01 Max.
Viscosity at 20 ºc 6.4 cps.
Solubility In water Soluble
Packing: 50 & 190 Kgs. in M.S./HDPE Drum.
ADVANCE PETROCHEMICALS LTD. also supply Ethylene Glycol Monobutyl Ether (EGMBE)
as per customer specification & other Glycol Ethers like Diethylene Glycol Monomethyl Ether ,
Ethylene Glycol Monomethyl Ether , Diethylene Glycol MonoButyl Ether , Ethylene Glycol
Monoethyl Ether & Diethylene Glycol monoethyl Ether .
Please ask M.S.D.S. of Ethylene Glycol Monobutyl Ether in Feed Back .
Top Back
Home | About us | Products | Contact
us | Feedback | FAQ© advancepetro.com all rights reserved. ( best experienced with 800 x 600 )