etron energy external lighting control system-ses rep
TRANSCRIPT
Public Lighting Control System R E MOT E MA NAG E ME NT. E NE R G Y SAVING S. CO ST S SAVING S.
Canadian Manufacturers Representative and Distributor for eTron Energy Corporation Contact: David Katz, President [email protected] Mobile: 416-618-4651
Summary
• Our Company
• System Architecture
• Remote control module
• Cabinet remote control
• System supervision
• Main functions
• Network for a Smart City
• Mobility, Governance, Environment, Living, Economy, People
• Advantages and Benefits
E-Tron Energy Corp.
Provide intelligent systems for the remote management of external lighting, both public and private, with the aim of energy savings, respect of the environment, safety and lighting quality, costs optimization;
Provide Building Automation integrated systems for building safety, control and energy savings;
Support and assist our customers and partners with our experience and know how in developing technological solutions of public utility.
System Architecture
Our System platform is based on a range of infrastructures and devices capable of transforming the urban electrical network into a high intelligent nervous system;
The neuron of such a nervous system is the “smart” lamppost: the existing public lighting network is spread across the urban territory, resulting in the ideal infrastructure for the realization of the Smart City.
System Architecture LAMP REMOTE CONTROL MODULE
Fault analysis Functions
Low powered lamp Automatic disconnection of the igniter (in case of interrupted bulb)
Interrupted bulb Switch on/off command
Broken or faulty capacitor Lighting flux reduction command to the bi-power ballast
Current absence Command to the electronic ballast to reduce the lighting flux by dimming (90-20%)
Broken fuse Surge control / low voltage
Flashing lamp (exhausting) Surge control / low lamp
Connection problems between the control module and the electronic ballast
System Architecture CABINET REMOTE CONTROL MODULE
Functions
Configuration up to 1.024 lamps for each cabinet
Voltage control of electricity network
Communication via modem (GSM,GPRS, PSTN), dedicated line or TCP/IP protocol
2.048 memorized events over a read only memory
Storage of 3 different telephone numbers for emergency calls
Remote reading of energy consumption
Switch on/off command of the lighting plant by a daily, weekly or yearly programming of the astronomic clock
System Architecture SYSTEM SUPERVISION MODULE
Main functions
Configuration up to 100 cabinets
Protect user access to LAN network or internet
On line updating of software
On line assistance via internet or modem
Creation of a central data storage with all the data sent
System Architecture SYSTEM SOFTWARE
Main functions
Display of all the events and anomalies of the lighting plant
Automatic statistics
Lamp and cabinet master data
Planning switch on/off cycles of the lighting plant throughout the astronomic clock
Planning switch on/off and flux regulation of each single lamp
Import / export data in xml format
Cartography of the plant
Remote reading of electrical parameters
Remote reading of meteorology parameters
Smart City
We create a real platform
that can provide services to
the cities without adding
cables, simply relying on the
existing electric network for
both Data Network and
electrical Power Supply.
Smart City HOW CAN BE DEFINED
According to a research performed by the Centre of Regional
Science at the Vienna University of Technology, a Smart City
can be identified by the following dimensions:
• Mobility
• Availability of ICT-infrastructure
• Sustainable, innovative and safe transport systems
• Governance
• Public and social services
• Transparent governance
• Living
• Individual safety
• Social cohesion
• Smart Economy
• Smart People
Video Surveillance
Advertising Network
Territory Services
Wi-Fi
Public Lighting Remote Control
Power Line BROADBAND COMMUNICATION OVER ELECTRICAL LINES
• In order for a Smart City to prosper, it requires an enabling platform capable of providing Value-Added Serves (VAS) in a modular and scalable configuration;
• Our System creates such an enabling platforms as it provides broadband communication over electrical lines (Power Line), which allows to use the public lighting facilities to supply VAS in a pervasive, non-invasive and highly integrated way.
Wi-
Fi
Vid
eo
Su
rvei
llan
ce
Dig
ital
Sig
nag
e
Terr
ito
ry
Ser
vice
s
Video Surveillance ARCHITECTURE
• Video surveillance solution for the roads, detection and localization of sensitive events
Video Surveillance FEATURES
The system consists of IP cameras installed on the lampposts.
A BPL (Broadband Power Line) Modem is connected to the cameras in order to send the video signal over the electrical line, while a similar modem receives the video signal from the electrical line and carries it over the Internet / Intranet network.
A video server is connected to the Internet / Intranet network in order to receive, record and manage the images (e.g. motion detector).
The video server can be watched from remote via a software, allowing to interact with the video surveillance system.
Wi-Fi ARCHITECTURE
• Solution for the supply of Internet connection service
TCP/IPGSM/GPRS
VPN
Wi-Fi Hot Spot
Broadband PLC Broadband PLC
ServiceProvider
Wi-Fi Hot Spot
Wi-Fi FEATURES
The system consists of Wi-Fi Hot Spots installed on the lampposts.
A BPL (Broadband Power Line) Modem is connected to the Hot Spots in order to route the traffic over the electrical line, while a similar modem receives the traffic from the electrical line and carries it over the Internet / Intranet network.
An Authentication Unit is connected to the Internet / Intranet network. It is designed to manage users and to record all the traffic data in compliance with local security legislations.
Communication to the Citizen ARCHITECTURE
• Real Time communication solution for City Info and Digital Advertising Outdoor panel
Communication to the Citizen FEATURES
The system consists of Outdoor Info Digital Panels or Advertising Digital Panels installed on the lampposts or near the lampposts.
A BPL (Broadband Power Line) Modem is connected to the Panels in order to make available the content over the electrical line, while a similar modem receives the data from the electrical line and carries it over the Internet / Intranet network.
The system includes a server where all the contents and configurations of the Panels are stored.
The contents can be created, managed and modified by accessing the server via Internet.
Electrical Vehicle (Battery) Charging ARCHITECTURE
• Solution to supply battery charging stations for electrical vehicles
Electrical Vehicle (Battery) Charging FEATURES
The system consists of Charging Stations distributed within the territory and connected to the public lighting network.
Every station supplies charge for electrical vehicles (electric cars, assisted-riding bicycles, Segway's, wheel chars, etc.)
Every station allows to pay for the electrical energy necessary to charge the vehicle by using a Smart Card, Smart Phone or any other payment means.
The Management Server can be connected to the Internet allowing to enable / disable the Charging Stations and to configure the Smart Cards.
Advantages and Benefits
• Energy Saving up to 45%
• Stability and Growth Pact
• Transparent Maintenance
• Improves effectiveness and efficiency
• Environmental Friendly (Kyoto)
• Helps reducing CO2 emissions
• Open Technology
• Suitable for all Lamps and ballasts Lamps phase-out completion by 2015
• Fast intervention
• Real-time fault detection
• Security
• Avoids dangers generated by the facilities
• Claims reduction
• Sensitive political issue
• Short Payback
• Period of 3 to 6 years
Street Light Module Example
Design Options
Thank You !
Canadian Manufacturers Representative and Distributor for eTron Energy Corporation Contact: David Katz, President [email protected] Mobile: 416-618-4651