extrudierte profi le extruded profi les
TRANSCRIPT
Röchling Industrial
Polystone® M (PE-UHMW/PE 1000)
Extrudierte Profi le
Extruded profi les
Röchling Industrial | 2
Polystone® M Extrudierte Profi le | Extruded profi lesInhalt | Content
InhaltRöchling-Gruppe ............................................................... 2-3Einzigartige Auswahl ...........................................................4Werkstoff kompetenz......................................................... 5-7Verarbeitungskompetenz ............................................... 8-10Wettbewerbsvorteil durch Innovation ...........................11Industriekompetenz ............................................................12LubX® Hochleistungs-Gleitwerkstoff e ....................................13LubX® CV Für höhere Geschwindigkeit und Produktivität .14-15Z-Profi le ...................................................................................16L-Profi le (Winkel) .....................................................................17Klemmprofi le ......................................................................18-19T-Profi le ............................................................................. 20-21U-Profi le ............................................................................ 22-25C-Profi le ............................................................................. 26-29Halbrund-Profi l ........................................................................30Rohre .......................................................................................31Seitenführungsprofi le .............................................................32Clip-Profi le ...............................................................................33Spezial-Profi le ................................................................... 34-35Bandmaterial ...........................................................................36Folien .......................................................................................37Technische Daten ....................................................................38Allgemeine Hinweise ..............................................................39
ContentRöchling Group .................................................................. 2-3Unique selection ...................................................................4Competence in materials ................................................. 5-7Competence in machining ............................................. 8-10Competitive advantages through innovation .................11Competence in industry .....................................................12LubX® High performance friction materials ............................13LubX® For higher speed and better productivity ...............14-15Z-profi les .................................................................................16L-profi les (angles) ....................................................................17Clamp-profi les.. ..................................................................18-19T-profi les ........................................................................... 20-21U-profi les ........................................................................... 22-25C-profi les ........................................................................... 26-29Round bar cover ......................................................................30Tubes .......................................................................................31Side guide profi le ....................................................................32Clip-profi les .............................................................................33Special-profi les ................................................................. 34-35Wear strips..............................................................................36Film ..........................................................................................37Technical data .........................................................................38General Information ................................................................39 www.roechling.com
Polystone® M Extrudierte Profi le | Extruded profi les
Röchling Industrial
R1 20 R79 20 R151 17 R242 34 R347 31 R420 20 R576 35
R2 20 R87 33 R152 16 R244 27 R348 31 R421 17 R579 29
R3 20 R88 34 R154 17 R245 28 R351 19 R422 19 R585 27
R4 20 R89 34 R155 18 R246 22 R352 19 R424 16 R591 35
R5 20 R90 33 R156 33 R247 24 R353 29 R425 30 R592 30
R6 20 R94 26 R157 33 R249 33 R358 31 R426 20 R594 23
R7 16 R95 30 R158 20 R250 33 R359 17 R428 28 R595 23
R7.1 17 R97 30 R160 26 R251 34 R361 35 R429 17 R597 33
R8 16 R98 22 R161 27 R252 35 R362 19 R430 29 R598 33
R9 16 R102 20 R167 24 R253 35 R363 28 R431 27 R603 27
R10 18 R107 18 R169 24 R255 22 R365 34 R432 29 R608 23
R10.1 18 R108 18 R170 18 R256 22 R366 31 R433 21 R615 16
R11 30 R111 28 R172 26 R260 27 R367 31 R435 17 R617 18
R12 34 R112 26 R173 22 R264 28 R368 31 R436 16 R619 26
R13 32 R113 28 R180 18 R265 26 R369 24 R437 21 R620 29
R14 32 R115 28 R182 17 R267 17 R372 23 R441 23 R621 29
R15 26 R116 34 R187 16 R269 22 R373 27 R443 29 R626 26
R16 26 R117 22 R188 27 R272 29 R374 19 R485 32 R629 28
R18 26 R119 18 R190 17 R275 18 R381 27 R511 31 R634 16
R19 26 R120 26 R196 33 R276 27 R383 31 R515 34 R636 17
R21 26 R123 22 R197 33 R283 30 R386 24 R519 19 R647 23
R22 29 R124 16 R205 16 R289 27 R387 19 R523 24 R648 18
R23 23 R125 17 R206 18 R293 16 R389 35 R527 23 R651 22
R24 22 R126 28 R207 32 R294 34 R390 31 R528 35 R655 23
R26 24 R127 26 R210 22 R295 20 R393 19 R529 23 R658 19
R28 24 R128 22 R211 16 R296 22 R395 27 R530 23 R660 24
R29 24 R129 27 R212 34 R300 28 R396 28 R533 26 R661 31
R30 24 R130 27 R213 25 R301 28 R397 28 R534 19 R665 32
R33 32 R131 27 R214 27 R306 20 R399 19 R535 16 R667 18
R35 32 R132 22 R216 22 R307 31 R401 32 R536 26 R668 27
R42 24 R133 20 R217 18 R308 31 R402 32 R542 17 R669 31
R48 34 R134 34 R218 18 R310 16 R403 32 R543 18 R671 24
R51 20 R135 34 R219 23 R313 28 R404 17 R545 27 R672 16
R51.1 20 R136 34 R220 23 R314 31 R405 17 R546 19 R673 24
R54 17 R137 17 R221 23 R326 34 R406 16 R547 19 R674 26
R63 22 R138 18 R226 26 R330 28 R407 18 R548 29 R676 28
R64 28 R139 34 R227 26 R331 26 R408 23 R552 16 R678 24
R65 34 R140 20 R231 22 R338 27 R411 20 R554 29 R679 28
R66 34 R141 17 R234 24 R339 18 R412 29 R556 16 R680 31
R67 34 R143 34 R235 23 R340 19 R413 23 R557 19
R68 24 R146 22 R236 23 R341 27 R416 29 R558 32
R76 24 R148 22 R237 18 R344 22 R417 23 R570 28
R77 33 R149 20 R240 29 R345 24 R418 20 R571 29
R78 32 R150 24 R241 23 R346 31 R419 21 R572 28
Index
2 | Röchling Industrial
Polystone® M Extrudierte Profi le | Extruded profi les
Röchling Group
Industrial Medical Automotive
Kompetenz in Kunststoff
Zur Röchling-Gruppe, die ihren Firmensitz in Mannheim hat, gehören eine Vielzahl von Standorten in zahlreichen Ländern der Welt. Mit mehreren Tausend Mitarbeitern produzieren wir dort, wo unsere Kunden und Märkte sind. Unsere drei Unternehmensbereiche Indust-rial, Automotive und Medical erwirtschaften auf dem europäischen, dem amerikanischen und dem asiatischen Kontinent einen milliardenfachen Jahresumsatz.
Röchling Industrial
Der Unternehmensbereich Industrial bedient nahezu alle Sektoren der Industrie mit anwendungsbezogenen optimalen Werkstoff en. Dafür verfügt Röchling über das wohl umfangreichste Produktport-folio thermo- und duroplastischer Kunststoff e weltweit. Hergestellt werden Halbzeuge wie Platten, Rund-, Hohl- und Flachstäbe, Formgussteile sowie Profi le und spanabhebend bearbeitete und konfektionierte Präzisionskomponenten.
Competence in Plastics
The Röchling Group, which is headquartered in Mannheim, includes a large number of locations in countries all over the world. With a workforce of several thousand employees, we manufacture our products in close proximity to our customers and markets. Our three company divisions, Industrial, Automotive and Medical, generate billions in sales every year on the European, American and Asian continents.
Röchling Industrial
The Industrial division supplies almost every sector of industry with optimal, application-oriented materials. To achieve this, Röchling has probably the world’s biggest product portfolio of thermoplastics and composite materials. The company manufactures a range of semi-fi nished parts such as sheets, rods, tubes, fl at bars, fi nished castings and profi les as well as machined and assembled precision components.
Röchling-Gruppe | Röchling Group
www.roechling.com
Röchling Industrial | 3
Onshore-/Offshore-Technik Onshore/offshore engineering
Überall in Ihrer Nähe
Die Business Unit Machined Components im Unternehmensbereich Industrial ist mit über 1000 Mitarbeitern der weltweit führende Zerspaner von Kunststoffen. Die flexiblen Unternehmen sind auf die Herstellung qualitativ hochwertiger Fertigteile für nahezu jeden Be-reich der Investitionsgüterindustrie spezialisiert. Neben zerspanten Kunststoffteilen bietet die BU Machined Components das weltweit größte Lieferprogramm von extrudierten Profilen aus thermoplasti-schen Kunststoffen, die auf PE-UHMW basieren. Gemeinsam mit dem Kunden erarbeiten wir optimale Lösungen, die effizient umgesetzt werden.
Ihre Ideen werden zu hochwertigen Komponenten
Das einzigartige, internationale Unternehmensnetzwerk bietet Ihnen die Werkstoffkompetenz eines der innovativsten Hersteller von Kunst-stoffhalbzeugen, außergewöhnliches Industrie-Know-how und einenMaschinenpark, der weltweit einmalig ist.
Profitieren Sie von den Synergien der weltweiten Standorte der Business Unit. Wir freuen uns auf Ihre anspruchsvollen Herausforderungen.
Everywhere close to you
Within the Industrial Division, the Business Unit Machined Components has over 1000 employees and is the world-wide leader in machining plastics. The flexible companies have specialised in the manufacture of high quality machined components for virtually every sector of the capital goods industry. Besides machined parts made, the BU Machined Components offers the world's probably largest product range of extruded profiles made of thermoplastics, which are based in particular on PE-UHMW. We develop optimum solutions jointly with the customer, then realise them efficiently.
Your ideas become high quality components
This one-of-a-kind, international network of companies provides you with the material expertise of one of the most innovative manufacturers of semi-finished plastic parts, as well as outstanding industry know-how and machinery that is unparalleled in the world.
You benefit from the synergies of the global locations of the Business Unit. We look forward to meeting your mostchallenging needs.
Röchling-GruppeGlobale Präsenz: 90 Unternehmen in 25 LändernRöchling GroupGlobal presence: 90 companies in 25 countries
4 | Röchling Industrial
Kompetenz in Kunststoff | Competence in plastics
Einzigartige Auswahl an extrudierten Profilen ausPolystone® M (PE-UHMW/PE 1000)
Einzigartige Auswahl: Über 700 Profil-Querschnitte
Entwickler und Hersteller von Anlagen und Maschinen in der Förder- und Handhabungstechnik, der Lager- und Verpackungsindustrie sowie der Getränke- und Abfüllindustrie setzen auf Bauteile aus thermo-plastischen Kunststoffen. Extrudierte Profile sind dabei ein wichtiger Bestandteil. Sie sind dort im Einsatz, wo gute Gleiteigenschaften bei gleichzeitig großer Verschleiß- und Abriebfestigkeit verlangt werden. Mit derzeit über 700 unterschiedlichen Querschnitten bietet Röchling eine im Markt wohl einzigartige Auswahl an Profilen aus PE-UHMW.
Ob Abdeck- oder Clip-Profil, Z-, L-, U-, C-, T- oder Vierkantprofil, ob komplexe Geometrien, spezielle Oberflächenstrukturen oder dünne Wandstärken – Ihnen steht das umfangreichste Fertigungsprogramm an extrudierten Standardprofilen oder individuell für Sie gefertigten Sonderprofilen zur Verfügung. Unser erfahrenes Team berät Sie um-fassend bei der Auswahl des richtigen Querschnitts.
Unique selection of extruded profiles made of Polystone® M (PE-UHMW/PE 1000)
Unique selection: More than 700 profile cross-sections
Developers and manufacturers of plant and machinery used in con-veyor and material handling technology, the storage and packaging industry and the bottling and beverage industry rely on thermoplastic components. Extruded profiles are a key part of these. They are used wherever good slide characteristics are demanded alongside high wear and abrasion resistance. With more than 700 different cross-sections now available, Röchling offers what is probably the widest selection of PE-UHMW profiles on the market.
Whether you need cover- or clip-profiles, Z-, L-, U-, C-, T- or square-profiles, complex geometries, special surface structures or thin wall thicknesses, you can choose from the most extensive range of extruded standard profiles or special profiles customised just for you. Our experienced team will provide comprehensive advice to help you select the right cross-section.
Röchling Industrial | 5
Werkstoffkompetenz | Competence in materials
Prozess der Profilextrusion
Bei der Profilextrusion wird der Rohstoff – eine Pulvermischung aus PE-UHMW, Additiven und Farbpigmenten – unter hohem Druck durch ein beheiztes Werkzeug gedrückt. Das Material wird plastisch und nimmt die Form des Werkzeuges an. Nach Verlassen des Werkzeuges ist ein kontrolliertes Abkühlen wichtig, um innere Spannungen auszu-gleichen und ein Verziehen des Profils zu vermeiden. Bei hoher Temperatur dehnt sich der Werkstoff aus und zieht sich beim anschließenden Erkalten wieder zusammen. Daher ist die exakte Auslegung des Werkzeuges besonders wichtig, um im fertigen Profil die Form und die vorgegebenen Toleranzen einzuhalten.
The profile extrusion process
In profile extrusion, the raw material – a powder mixture of PE-UHMW, additives and colouring pigments – is forced through a heated tool under high pressure. The material becomes plastic and takes on the form of the tool. After leaving the tool, controlled cooling is essential in order to equalize internal stresses and prevent the profile warping. The material expands at high temperature and then contracts again as it subsequently cools down. This means it is particularly important to configure the tool precisely so that the form and prescribed tolerances are kept in the finished profile.
2
1
3
4
2
3
4
Trichter: Polystone® M (PE-UHMW / PE 1000) wird in Form einer Pulvermischung über einen Trichter zugeführt Funnel: Polystone® M (PE-UHMW / PE 1000) is fed in as a powder mixture through a funnel
Hydraulikzylinder: Der Kolben transportiert das Pulver unter hohem Druck in das Werkzeug Hydraulic cylinder: The piston transports the powder into the tool under high pressure
Werkzeug: Das beheizte Werkzeug gibt dem Profil den gewünschten Querschnitt Tool: The heated tool gives the profile its desired cross-section
Abkühlen und Zuschnitt: Abkühlen Ihres Profils und Zuschneiden auf die gewünschte Länge Cooling and blank cutting: Your profile is cooled and cut to the desired length
1
6 | Röchling Industrial
Werkstoffkompetenz | Competence in materials
Umweltschonend durch 100%ige Recyclingfähigkeit
Lebensmitteltauglichkeit bereits für viele Rezepturen verfügbar (gem. EU 10/2011 und FDA)
Hohe Schlagzähigkeit
Environmentally friendly 100% recyclable
Suitability for use with foods already available for many recipes (as per EU 10/2011 and FDA)
High impact strength
Polystone® M (PE-UHMW/PE 1000)
Polystone® M ist ein Werkstoff mit außergewöhnlichen Eigenschaf-ten. Das ultrahochmolekulare Polyethylen löst als extrudiertes Profil Reibungs-, Verschleiß- und Materialflussprobleme in zahlreichen technischen Anwendungen. Die moderne Förder- und Handhabungs-technik, Lager- und Verpackungssysteme oder die Getränke- und Abfüllindustrie kommen heute ohne diesen Hochleistungswerkstoff nicht mehr aus.
Polystone® M (PE-UHMW/PE 1000)
Polystone® M is a material with exceptionally properties. As an extruded profile, this polyethylene of ultrahigh molecular weight solves problems of friction, wear and material flow in countless technical applications. Modern conveyor and material handling technology, storage and packaging systems and the bottling and beverage industry could not do without this high-performance material today.
6 | Röchling Industrial
Hervorragende Gleiteigenschaften
Dank des geringen Gleitreibungskoeffizienten können extru-dierte Profile aus Polystone® M die benötigte Antriebs-energie in Fördersystemen reduzieren und die Stabilität der Prozesse erhöhen. Dabei verfügt Polystone® M über dauerhaft selbstschmierende Eigenschaften.
Extreme Verschleißfestigkeit/Lange Betriebsdauer
Aufgrund der extrem hohen Verschleißfestigkeit halten extrudierte Profile aus PE-UHMW hohen Beanspruchungen langfristig stand.
Dauer-Einsatztemperatur von -250 bis +80° Celsius
Extrudierte Profile von Röchling sind in einer Vielzahl an An-wendungen mit hohen und sehr niedrigen Temperaturen im Einsatz: beispielsweise in Spiralfrostern oder Kühlhäusern.
Outstanding slide characteristics
Their low slide friction coefficients enable extruded profiles made of Polystone® M to reduce the drive energy required in conveyor systems and increase the stability of processes. Polystone® M also has particularly long-lasting self-lubrica-tion properties.
Extreme wear resistance/long service life
Extruded profiles made of PE-UHMW can withstand high long-term stresses thanks to their extremely high wear resistance.
Continuous operating temperature from -250 to +80° Celsius
Extruded profiles from Röchling are used in a large number of applications involving high and very low temperatures, such as spiral frosters or cold stores.
Röchling Industrial | 7
Weitere Eigenschaften von extrudiertenProfi len aus Polystone® M:
• Sehr gute Beständigkeit gegen Chemikalien
• Fast keine Wasseraufnahme
• Hohe Widerstandsfähigkeit gegen Bruch oder Rissbildung
• Nur geringfügige Anhaftung an den Oberfl ächen
Zahlreiche Modifi kationen möglich:
• Antistatisch (AST)
• Flammhemmend ausgestattet
• Antimikrobiell ohne Einsatz toxischer Zusätze
• Glaskugelgefüllt
• Nahezu jede gewünschte Farbe herstellbar
• Gleitmittelmodifi ziert
• Hitzestabilisiert (reduzierte Wärmealterung)
• UV-stabilisiert
Other properties of extruded profi lesmade of Polystone® M:
• Very high resistance to chemicals
• Almost no moisture absorption
• High resistance to fracture or cracking
• Only slight adhesion to surfaces
Numerous modifi cations possible:
• Antistatic (AST)
• Flame retardant fi nish
• Antimicrobial without the use of toxic additives
• Glass bead fi lling
• Almost any colour desired can be produced
• Lubricant modifi ed
• Heat stabilised (reduced heat ageing)
• UV resistant
Röchling Industrial | 7
8 | Röchling Industrial
Verarbeitungskompetenz | Competence in machining
8 | Röchling Industrial
Einzigartige FertigungsmöglichkeitenWir fertigen Ihre Profile auf modernsten Extrusionsanlagen mit im Markt einzigartigen Fertigungsmöglichkeiten: Ob Abdeck- oder Clip-Profil, Z-, L-, U-, C-, T- oder Vierkantprofil, ob komplexe Geometrien, dünne Wandstärken oder hochglänzende und besondere Oberflä-chenstrukturen – Ihnen steht das im Markt wohl umfangreichste Fertigungsprogramm an Standardprofilen oder für Sie exklusiv gefertigten Sonderprofilen zur Verfügung.
Beratung und eigener Werkzeugbau
Bei Entwicklung und Design Ihres Spezialprofils nach Ihren indi-viduellen Vorgaben beraten Sie unsere erfahrenen Techniker und Werkzeugbauer, um ein optimal funktionierendes Ergebnis für Ihre Anwendung zu erzielen. Unser eigener Werkzeugbau bietet dabei höchste Präzision, Schnelligkeit und eine optimale Abstimmung des Werkzeugs auf den verwendeten Kunststoff.
Unique manufacturing optionsWe manufacture your profiles on the very latest extrusion systems with unique manufacturing options: whether you need cover- or clip-profiles, Z-, L-, U-, C-, T- or square-profiles, complex geometries, thin wall thicknesses or high-gloss and special surface structures, you can choose from the most extensive range of standard profiles or special profiles customised exclusively for you.
Consulting and in-house toolshopOur experienced engineers and toolmakers will give you advice on how to design and develop your special profile to meet your own particular requirements so that you achieve the outcome that works best for your application. Our in-house toolshop offers maximum precision, speed and the optimum configuration of the tool to the plastic used.
Zahlreiche Vorteile
• Über 700 Querschnitte
• In den meisten Fällen deutlich günstiger als das zerspante Profil
• Eigener Werkzeugbau
• Komplexe Geometrien möglich
• Querschnitte realisierbar, die nicht spanabhebend hergestellt werden können
• Dünne Wandstärken ab 1,5 mm
• Keine Längenbegrenzung
• Kein Materialverlust
• Homogene, glatte Oberfläche
Numerous advantages
• More than 700 cross-sections
• In most cases much cheaper than machined profiles
• In-house toolshop
• Complex geometries possible
• Possibility of cross-sections that cannot be produced by machining processes
• Thin wall thicknesses from 1.5 mm
• No limits on length
• No loss of material
• Smooth, homogeneous surface
Röchling Industrial | 9
Verarbeitungskompetenz | Competence in machining
Röchling Industrial | 9
Die Fertigung von Profilen im Extrusionsverfahren bietet im Ver-gleich zur spanabhebenden Herstellung je nach Profilquerschnitt Vorteile hinsichtlich der Wirtschaftlichkeit und technischen Realisierbarkeit.
Beispiele für Profile, die aufgrund der Geometrie spanabhebend nicht oder nur sehr aufwendig hergestellt werden können. Im Ex-trusionsverfahren gibt es diesbezüglich kaum Beschränkungen und es kann daher fast jede erdenkliche Profilform problemlos realisiert werden.
Examples of profiles whose geometry makes it impossible or complex to produce in machining processes. There are hardly any restrictions in this regard in an extrusion process, so almost every conceivable profile form can be realised without any problem.
Beispiele für Profile, die bei spanabhebender Fertigung einen hohen Materialverlust und Zerspanungsaufwand verursachen und deswegen wirtschaftlich nicht gefertigt werden können. Die Extrusion bietet hier einen klaren Vorteil, da Profile mittels eines Formwerkzeuges produziert und somit ohne jeglichen Materialver-lust hergestellt werden.
Wirtschaftlichkeit Economy
Technische Realisierbarkeit Technical feasibility
R343 C-Profil C-profile
R242 Spezial-Profil Maßstab 1:1 Special-profile Scale 1:1
R389 Spezial-Profil Maßstab 1:1 Special-profile Scale 1:1
R355 Spezial-Profil Maßstab 1:1 Special-profile Scale 1:1
R361 Spezial-Profil Special-profile
R259 Spezial-Profil Special-profile
Examples of profiles that entail significant loss of material and machining expenditure in machining processes and so cannot be manufactured cost-effectively. Extrusion offers a clear advantage here as profiles can be produced using a die, meaning there is no loss of material whatsoever.
Depending on the profile cross-section, the manufacture of profiles in an extrusion process offers advantages over machining processes in terms of economy and technical feasibility.
9
23
2,7
16,3
4,1
2,6
7,8
69,78
60,6
30,2
20,6
24,534,5
50,3
43
5
53
34
82
10
8025
612
33,33 33,5
Ø14
Ø31
R1
132,
5
92
R10
Verarbeitungskompetenz | Competence in machining
10 | Röchling Industrial
Weiterverarbeitung und Service
Weiterverarbeitung und Service
Unsere Weiterverarbeitungsmöglichkeiten und unser Servicerunden das umfangreiche Angebot an extrudierten Profi len ab:
• Stanzen von Befestigungslöchern und Profi lendkonturen
• Einbringen von Bohrungen und Einschraubbohrungen
• Kombination mit Stahlprofi len
• Spanende Endbearbeitung des extrudierten Profi ls
• Zuschnitt auf Länge
• Lieferung auf Rolle
Zerspante Profi le
Für Prototypen oder Bedarfsmengen, für die die Erstellung eines Ex-trusionswerkzeuges nicht wirtschaftlich ist, können wir Profi le auch durch spanabhebende Bearbeitung herstellen. Hierfür setzt Röchling moderne Profi lfräsautomaten ein, mit denen auch anspruchsvolle Querschnitte hergestellt werden können. Als Hersteller von Kunst-stoff halbzeugen verfügen wir über die notwendigen hochwertigen Materialien.
Finishing and service
Finishing and service
The comprehensive range of extruded profi les is rounded off by fi nishing options and our package of services:
• Punching fi xing holes and profi le end contours
• Insertion of screw and plain holes
• Combination with steel profi les
• Final machining of the extruded profi le
• Cutting to length
• Supplied as a roll
Machined profi les
For prototypes or quantities for which the manufacture of an extrusion tool is not economically viable, we can also produce profi les through machining processes. To do so Röchling uses modern profi le milling machines that allow even complex cross-sections to be produced. As a manufacturer of semi-fi nished plastic products, we have the high-grade materials required.
1,90
m
Polystone® M Extrudierte Profile | Extruded profiles
Röchling Industrial | 11
Wettbewerbsvorteiledurch InnovationDas Thema Innovation hat bei Röchling höchste Priorität. So präsen-tieren wir dem Markt Produktentwicklungen, die unseren Kunden Wettbewerbsvorteile bieten.
In unseren gut ausgestatteten Werkstofflabors und in enger Kooperati-on mit Lieferanten, Wissenschaftlern und Instituten entwickeln wir zu den Aufgabenstellungen unserer Kunden neue Produkte und Herstel-lungsverfahren.
Das Qualitätsmanagementsystem unserer Unternehmen nach DIN EN ISO 9001 wird regelmäßig in Audits überprüft und dessen Einhaltung sichergestellt. Außerdem unterziehen wir unsere Produkte in allen Phasen des Produktionsprozesses permanenten Kontrollen.
Durch die Mitarbeit in zahlreichen Gremien und Ausschüssen stellen wir uns aktiv in den Dienst der Branchen und definieren so die Quali-tätsstandards der Zukunft.
Mehrwert für unsere Kunden
• Produkt- und Werkstoffentwicklung• Modifikation bestehender Rezepturen• Praxisnahe Versuchsanlagen• Zusammenarbeit mit Wissenschaftlern• Moderne Werkstofflabors
More value for our customers
• Product and materials development• Modification of existing compositions• Practical testing facilities• Cooperation with scientists• State-of-the-art materials laboratory
Competitive advantages through innovation At Röchling, our top priority is innovation. This allows us to present the market with product developments that provide our customers with competitive advantages.
We develop new products and manufacturing processes to fit the specific problem definitions of our customers in our excellently outfitted materials laboratory, and in close cooperation with suppliers, scientists and institutes.
Our quality management system is regularly inspected in audits in ac-cordance with DIN EN ISO 9001 and its compliance ensured. Moreover, our products undergo ongoing controls in all phases of the production process.
We actively engage in serving the industries through our collaboration with numerous advisory boards and committees, and thus, help define the quality standards of the future.
Forschung und EntwicklungResearch and development
Industriekompetenz | Competence in industry
12 | Röchling Industrial
Kurvenführung, LubX® CSlide guide, LubX® C
Extrudiertes Profi l als Handlauf einer Eishockey-BandeExtruded profi le as handrail on an ice hockey board
Spezialprofi l für eine GetränkeabfüllanlageSpecial profi le for a drinks bottling plant
Kettenführungsprofi lChain guide profi le
Schlitten mit Kufenaus extrudierten Profi lenCarriage with runners madefrom extruded profi les
Spiralfroster mit extrudierten Profi len aus LubX®Spiral froster with extruded profi les made of LubX®
Industriekompetenz | Competence in industry
Röchling Industrial | 13
Gleitpartner POM Sliding partner POM
Gleitpartner PET Sliding partner PET
Gleitpartner Stahl Sliding partner Steel
Gleitreibungskoeffizienten unter Trockenbedingungen, auf anwendungs- nahem Röchling-Tribologieprüfstand validiert, Geschwindigkeit: 0,25 m/s, Flächenpressung: 0,25 MPa, Prüfzeit: 24 h
Coefficients of sliding friction under dry conditions, validated on the application-related Röchling tribology test stand, Speed: 0,25 m/s, Surface pressure: 0,25 MPa, Test time: 24 h
0,20 0,08 0,32 0,21 0,11 0,28 0,10 0,20 0,38
LubX® S LubX® C PE-UHMW LubX® S LubX® C PE-UHMW LubX® S LubX® C PE-UHMW
Schlitten mit Kufenaus extrudierten ProfilenCarriage with runners madefrom extruded profiles
Spiralfroster mit extrudierten Profilen aus LubX®Spiral froster with extruded profiles made of LubX®
Energieeffizienz verbessern
Bei langfristig steigenden Energiepreisen spielt die Senkung der Energiekosten bei der Projektierung von Produktions-, Lager- und Logistikprozessen eine immer bedeutendere Rolle. Der Einsatz gleitoptimierter Komponenten in einem Förderprozess kann die benötigte Förderkraft – und somit die eingesetzte Energie – auf ein Minimum verringern. Die Leistungsfähigkeit und Effizienz der Anlage kann so deutlich verbessert werden.
Gleitreibungskoeffizient reduziert
Speziell für Anwendungen in der Förder- und Automatisierungstech-nik hat Röchling mit LubX®C und LubX®S zwei neue, PE-1000-basier-te Hochleistungswerkstoffe entwickelt, die über herausragende Tro-ckenlaufeigenschaften verfügen. Der Gleitreibungskoeffizient konnte um bis zu 75 % reduziert werden. Im Vergleich zu herkömmlichen Gleitwerkstoffen benötigen mit LubX® ausgestattete Fördersysteme deutlich weniger Energie, die Prozessstabilität wird erhöht und der Geräuschpegel erheblich verringert.
Improve energy efficiency
With energy prices rising in the long term, lowering energy costs plays an increasingly more important role in the project planning of production, storage and logistic processes. When utilising components with optimized sliding properties in conveying processes, the conveying power required – and thus the energy applied – may be reduced to a minimum. The performance and efficiency of the plant can thus be considerably enhanced.
Reduced coefficient of friction
In LubX®C and LubX®S, Röchling has developed two new, PE-1000-based high-performance materials with outstanding dry running properties especially for use in materials-handling technology and automation. The slide friction coefficient has been reduced by as much as 75 %. When compared to conventional slide materials, conveyor systems equipped with LubX® require significantly less energy, process stability is increased and the noise level is considerably reduced.
Clever Energie sparen bis zu/ Save energy
smartly up to
weniger Reibung/ less friction
75 %LubX® – Hochleistungs-Gleitwerkstoffe für Fördertechnik und AutomatisierungHigh performance friction materials for handling and automation
Gleiteigenschaften im VergleichComparison of sliding properties
14 | Röchling Industrial
Polystone® M Extrudierte Profi le | Extruded profi les
LubX® CV
Für höhere Geschwindigkeit und ProduktivitätMit LubX® S und LubX® C hat Röchling im Jahr 2012 zwei Gleitwerkstoff e für die Fördertechnik vorgestellt, deren Gleiteigenschaften gezielt auf ihren jeweiligen Gleitpartner hin optimiert wurden.
Speziell für Anlagen, die mit höheren Geschwindigkeiten und somit höherer Produktivität betrieben werden sollen, hat Röchling nun LubX® CV entwickelt. LubX® CV verfügt über außergewöhnlich gute Gleiteigenschaften bei gleichzeitig niedrigster Temperaturentwicklung. Beides hat einen geringeren Abrieb und eine lange Lebensdauer des gesamten Systems zur Folge.
In wissenschaftlichen Untersuchungen mit der Technischen Universität Chemnitz, Institut für Fördertechnik und Kunststoff e, und der Universität Erlangen, Lehrstuhl für Kunststoff technik, hat LubX® CV den hohen Anspruch bestätigt. Lassen Sie sich vonFakten überzeugen.
For higher speed and better productivityIn 2012 Röchling introduced two sliding materials for the conveyor industry: LubX® S and LubX® C. Both materials’ sliding properties have been optimized specifi cally for their respective sliding partners.
Röchling has now developed LubX® CV: Especially for systems to be operated at higher speeds and therefore higher productivity. LubX® CV has exceptionally good sliding properties and at the same time exhibits a very low temperature development. Both results in lower wear and a longer lifespan of the entire system.
In scientifi c studies in cooperation with the Technical University of Chemnitz, Institute for Material Handling and Plastics, and the University of Erlangen, Institute of Polymer Technology, LubX® CV has met the high demands. Let the facts convince you.
Die Prüfungen wurden im unternehmenseigenen Werkstoffl abor auf einem in Kooperation mit Wissenschaftlern entwickelten Tribologie-Prüfstand durchgeführt. Um das Prüfverfahren an die gesteigerten Anforderungen anzupassen, wurden für den anwendungsnahen Test die Bedingungen deutlich erhöht: Die Geschwindigkeit wurde auf0,5 m/s und die Flächenpressung auf 0,5 MPa verdoppelt. Unter diesen gestiegenen Anforderungen verfügt LubX® CV mit nur μ: 0,13 über den mit Abstand niedrigsten Gleitreibungskoeffi zienten und die kür-zeste Einlaufphase.
The tests were carried out at the company's materials laboratory on a tribology test apparatus developed in cooperation with scientists. In order to adapt the test procedure to the increased requirements, the conditions were signifi cantly increased for the application-oriented test: The speed was doubled to 0.5 m/s and the surface pressure was doubled to 0.5 MPa. Under these increased demands LubX® CV exhibited by far the lowest coeffi cient of sliding friction at only μ: 0.13 and the shortest run-in phase.
Niedriger Gleitreibungskoeffi zient | Low Coeffi cient of Sliding Friction
Gleitreibungskoeffi zient | Coeffi cient of Sliding Friction
t in Stunden | time in hours0 2 4 6 8 10 12 14 16 18 20 22 24
LubX® CV LubX® C PE-UHMW
0,40
0,35
0,30
0,25
0,20
0,15
0,10
0,05
0
µ
14 | Röchling Industrial
Industriekompetenz | Competence in industry
Gleitreibungskoeffi zient unter Trockenbedingungen. Auf anwendungsnahem Röchling-Tribologieprüfstand validiert. Geschwindigkeit: 0,5 m/s,Flächenpressung: 0,5 MPa, Prüfzeit: 24 h, Gleitpartner POM
Coeffi cient of sliding friction under dry conditions, validated on Röchling’s application-level tribology test apparatus. Speed: 0.5 m/s, surface pressure 0.5 MPa, test time 24 hours, Sliding partner POM
© b
task
inka
ya |
foto
lia.d
e
Röchling Industrial | 15
Industriekompetenz | Competence in industry
Röchling Industrial | 15
Für höhere Geschwindigkeit und ProduktivitätFor higher speed and better productivity
Für die Messung der Zugkraft am Antrieb wurde auf einem anwen-dungsnahen Gleitkettenfördersystem LubX® CV mit einem Standard PE-UHMW im Vergleich getestet. Die Grafi k zeigt, dass der gemesse-ne Wert für LubX® CV (Mittelwert = 193 N) bei weniger als 30 % des Wertes für PE-UHMW (Mittelwert = 669 N) liegt.
Die elektrische Energieaufnahme des Antriebs war mit LubX® CV ebenfalls entsprechend niedriger. Die signifi kant geringeren Aus-schläge der Messkurve für LubX® CV sind zudem ein Beleg für eine deutlich bessere Prozessstabilität und geringere Geräusch-entwicklung.
To measure the tensile force on the drive LubX® CV was tested in comparison with a standard PE-UHMW on an application oriented conveyor belt system. The graph shows that the measured value for LubX® CV (mean = 193 N) is less than 30 % of the value for PE-UHMW (mean = 669 N).
The electrical energy consumption of the drive was also correspondingly lower with LubX® CV. The significantly lower amplitudes of the measured curve for LubX® CV are also evidence of significantly improved process stability and a lower noise development.
Energie effi zient nutzen | Effi cient energy use
Während der Prüfung des Gleitreibungskoeffi zienten misst ein Infrarotsensor (Pyrometer) berührungslos die Temperaturentwicklung direkt auf der Reibfl äche der Probe. Die gemessene Temperatur von LubX® CV stieg im Test nicht über 28° C und lag bis zu 17° C unter den anderen Werkstoff proben. Zudem zeigt der Prüfkörper aus LubX® CV nach 24 Stunden nahezu keine Verschleißerscheinungen.
During the test of the coeffi cient of sliding friction, an infrared sensor (pyrometer) measures the temperature development directly on the friction surface of the sample without contacting it. The measured temperature of LubX® CV in the test does not rise over 28° C, which was up to 17° C below the other material samples. In addition, the LubX® CV sample shows almost no signs of wear after 24 hours.
Geringe Temperaturentwicklung | Low temperature development
Zugkraft am Antrieb | Traction on the drive
1000
900
800
700
600
500
400
300
200
100
0
t LubX® CV PE-UHMW
Kette
nzug
kraf
t | C
hain
tens
ile fo
rce
(N)
Temperaturentwicklung | Temperature development
50
45
40
35
30
25
20
15
10
5
0
t in Stunden | time in hours0 2 4 6 8 10 12 14 16 18 20 22 24
LubX® CV LubX® C PE-UHMW
°C
Gleitreibungskoeffi zient unter Trockenbedingungen. Auf anwendungsnahem Röchling-Tribologieprüfstand validiert. Geschwindigkeit: 0,5 m/s, Flächenpressung: 0,5 MPa, Prüfzeit: 24 h, Gleitpartner POM
Temperature development under dry conditions, validated on Röchling’s application-level tribology test apparatus. Speed: 0.5 m/s, surface pressure 0.5 MPa, test time 24 hours, Sliding partner POM
Zugkraft am Antrieb während eines kompletten Kettendurchlaufes. Geschwin-digkeit 0,68 m/s. Technische Universität Chemnitz, Institut für Fördertechnik und Kunststoff e, Gleitpartner POM
Traction on the drive during a complete chain run. Speed 0.68 m/s, Chemnitz University of Technology, Institute for Material Handling and Plastics, Sliding partner POM
16 | Röchling Industrial
Polystone® M Extrudierte Profile | Extruded profiles
M 1:1R7
202
5,5
3
R8
5,5
2025
,5
12
354
R9
23,5
3,5
3,25
123
4
R1244
520
205
3 9
R152
24
18
5,8
6
R187
275
1536
5
R205
3
2023
349
R29319,7
24
14
10
R0,510
6
R55218,2
24
12,5
10
R0,5
R0,5 R0,5
6
3,5
9,7
R556
1813
10
16
11 2
R2R1
R1
R1 R1
3
8
R535
26,5
2 7 4 6,2
4
4
R3104
17
520
12
R406
22,8
3
13
7,4
9,23,6
3
R424
15
10
10
253
3
R436
68,8
21
24
6
3
5,8
R211
5,5
233
3
96
R615
26,5
14
4
4 4
5
R634
12 12
916
,5
16,5
R1
4,53
1,5
1 15
20
R672
13,2
16,9
7,45,8
13,9
3
1,5
2
2,951,58,75
Rollenlänge ca. 60 mLength per roll ca. 60 m
Z-ProfileZ-profiles
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
ab Lager lieferbar | available ex stock
Röchling Industrial | 17
Polystone® M Extrudierte Profile | Extruded profiles
R18222
4,8
10
10
33,5
R190
405
33
20
5
5,8 6
6
2
17
R267
21
5
9
4
R359
45
10
10
40
R404
19,6
8
3
2,8
R405
19,6
2,8
4,3
R542
3,710,7
51
46
R4215,3
2
20,2
8
R429
202
5,5
R435
6
20
15
3
R141
11
23
3
10
R7.1
202
3
R54
53
10
29
7
R125
38
38
6
90�
R137
483
4
7
3 R151
7
4
18,7
523
R154
12
16
2
7
R636
66,5
90˚
55
8
Rollenlänge ca. 60 mLength per roll ca. 60 m
Z-Pr
ofile
Z-
profi
les
Klem
mpr
ofile
Clam
p-pr
ofile
sL-
Profi
le (W
inke
l)L-
profi
les
(ang
les)
T-Pr
ofile
T-pr
ofile
sU
-Pro
file
U-p
rofil
esC-
Profi
leC-
profi
les
Hal
brun
d-Pr
ofile
Roun
d ba
r cov
erSe
iten
führ
ungs
profi
leSi
de g
uide
pro
files
Rohr
eTu
bes
Clip
-Pro
file
Clip
-pro
files
Spez
ial-
Profi
leSp
ecia
l-pr
ofile
sB
andm
ater
ial
Wea
r str
ips
Folie
nFi
lm
L-Profile (Winkel)L-profiles (angles)
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
ab Lager lieferbar | available ex stock
18 | Röchling Industrial
Polystone® M Extrudierte Profile | Extruded profiles
R10
21
13,5
5 3
1,5 10
R108
22
11,2
28
3,7
5,2
17
R119
16
31,
8
5,5
3 9
212,5 3
R10.1
21
13,5
3
1,5 10
R107
72
45
8
1,5
4
R138
521
8,4
2 2,7
16
R155
2,7
10
2,3
15
R170
8,52,5
2,7
1,5
13
21
R180
11,4
104
32,35
3,3
6,9
2,7
3
R206
4014
17,5
3
4 108,5
1,5
R218
252,5
1520
104
31
R237
25
8,5
1,6 5,
3
2
10,5
R33928,5
5
4
2,7
4,5
10,5
5,5
4,5
10,5
R4075,
2
2,8
1
2,6
8,3
21
2
20°
R543
R1
6,15
13,82
13,44
1,45
5,8
2,85
R275
12,36
32,
5
26
3,3
3
R217
40
20
104
31
R648
31,
7
9
21
R617
15,5
6,32,3
6
2,8
1,5
R667
47
15
11,7
44,
5
5
Rollenlänge ca. 60 mLength per roll ca. 60 m
KlemmprofileClamp-profiles
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
ab Lager lieferbar | available ex stock
Röchling Industrial | 19
Polystone® M Extrudierte Profile | Extruded profiles
R399
15
7
7
1,6
2,6 2
R519
165,3
7
3,6
R546
12,5
5,8
6,9
R387
17,1
4
R1,1
3,2
7,8
R351
6,5
12,56
2,5
1,5
R352
6,5
12,55,8
2,5
1
R547
17,11
4 13,1
3,29,
9
Clip-Profile
Clip-profiles
Spec
ial-profi
les
Side
guide
R422
10
33
31,
5
3
R393
1,5
3
14,5
13,2
5
7,75
R534
26,5
10
4
3,2
47
4
R374
8,9
4,5
35
2
2
R340
67,5
4
10,5
10,5
2,7
R3624
1
25
204 11
R658
12,57,2
3,5
0,7
0,56
0,8
2
1,1
R5576,1
2,3
0,8 ± 0,5
7,8
1,9
Rollenlänge ca. 60 mLength per roll ca. 60 m
KlemmprofileClamp-profiles
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
ab Lager lieferbar | available ex stock
Z-Pr
ofile
Z-
profi
les
Klem
mpr
ofile
Clam
p-pr
ofile
sL-
Profi
le (W
inke
l)L-
profi
les
(ang
les)
T-Pr
ofile
T-pr
ofile
sU
-Pro
file
U-p
rofil
esC-
Profi
leC-
profi
les
Hal
brun
d-Pr
ofile
Roun
d ba
r cov
erSe
iten
führ
ungs
profi
leSi
de g
uide
pro
files
Rohr
eTu
bes
Clip
-Pro
file
Clip
-pro
files
Spez
ial-
Profi
leSp
ecia
l-pr
ofile
sB
andm
ater
ial
Wea
r str
ips
Folie
nFi
lm
20 | Röchling Industrial
Polystone® M Extrudierte Profile | Extruded profiles
R6
R3
R4 R5
7,2
47
2,6
5,6
404
30,5
12,5
102,
5
3 3
42,5
6
4
312
6
8,8
40 ,545
49
6,5
45
5,5 2,
5
R2R1
4
5,5
40 3
R51.1
30,5
9
44
19,5 20,5
21 23
4
R51
19,75
34
5
42,5
30,56
R79
4640,2
6
2,7
9
R133
4
2,5
2040,5
3
10
R149
36
40
10
6,5
5,5
2,5
3 8
R158
9,5
12
108
11 4
4
R102
60
15
24,7
5,5
R140
24
10
17
8
R295
9
45
40,5
4
R418
45,541
9 12,2
R420
39,6
42,5
5,4
R426
3 5,5
39,35,7
R306
40
15
16,5
R411
44,7230,2
6,3 10
,4
Rollenlänge ca. 60 mLength per roll ca. 60 m
T-ProfileT-profiles
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
ab Lager lieferbar | available ex stock
Röchling Industrial | 21
Polystone® M Extrudierte Profile | Extruded profiles
R419
45,540,5
4
9 12
R433
42,53,52,
257
411
38,5
R437
4,2
2
116,
8
31,6
443
Rollenlänge ca. 60 mLength per roll ca. 60 m
T-ProfileT-profiles
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
ab Lager lieferbar | available ex stock
Z-Pr
ofile
Z-
profi
les
Klem
mpr
ofile
Clam
p-pr
ofile
sL-
Profi
le (W
inke
l)L-
profi
les
(ang
les)
T-Pr
ofile
T-pr
ofile
sU
-Pro
file
U-p
rofil
esC-
Profi
leC-
profi
les
Hal
brun
d-Pr
ofile
Roun
d ba
r cov
erSe
iten
führ
ungs
profi
leSi
de g
uide
pro
files
Rohr
eTu
bes
Clip
-Pro
file
Clip
-pro
files
Spez
ial-
Profi
leSp
ecia
l-pr
ofile
sB
andm
ater
ial
Wea
r str
ips
Folie
nFi
lm
22 | Röchling Industrial
Polystone® M Extrudierte Profile | Extruded profiles
R24
3634
R111
R63
30,4
42,3
9
R98
44
35,5
74
R117
42,223
±0,2
93
30,4
R123
41
35,5
4
7
R128
41
36,5
9
3
R132
3
10
2040,5
R146
18
22,4
4,7
R148
3640
10
5,5
2,5
3
R173
47
3
15
3
R21015
4
45,5
52,5R4,5
R3
R216
80
70
3
153
5,5
R231
3
10
2040
R246
37
30,4
40,1
R255
1912
,7
9,59,5
57,2
R256
1912
,7
9,59,5
82,6
R269
41
5
45
9
31
R296
45
9
40,5
R344
4
10
41
35,5
R651
8,8
4
5 31
41
100,5
0,218
60˚0,43
Rollenlänge ca. 60 mLength per roll ca. 60 m
U-ProfileU-profiles
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
ab Lager lieferbar | available ex stock
Röchling Industrial | 23
Polystone® M Extrudierte Profile | Extruded profiles
R221
12,5
28,55,1
39,3
6
1520
R23
137
125
10
9
R21913
4,1
3,18
13
10
R220
175,1
39,3
20
15
R235 R236
15 19
20
10,5
9
12,6 16
19
10,1
8,4
R241
510
149
713
R441
47
20
40,5
R527
40
35 4,5
8
R529
36
28,7
6
12
R530
60
28,7
126
R408
60
52
3,5
16
R647
15
139
7
105
R608
136
11
16
2,5
3,5
R413
4
12,75,5
12,7
R1
R372
4,5
19
15
14
R417
4
R1
115,3
13
R655
116
R1
16,512,5
4,52R1
R0,5
R594
3,36,4
8,6
23
1,7
R0,5
R0,5 10,8°
R595
16
12,6
2 7
10,118,75
R1,5
R1,5
Rollenlänge ca. 60 mLength per roll ca. 60 m
U-ProfileU-profiles
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
ab Lager lieferbar | available ex stock
Z-Pr
ofile
Z-
profi
les
Klem
mpr
ofile
Clam
p-pr
ofile
sL-
Profi
le (W
inke
l)L-
profi
les
(ang
les)
T-Pr
ofile
T-pr
ofile
sU
-Pro
file
U-p
rofil
esC-
Profi
leC-
profi
les
Hal
brun
d-Pr
ofile
Roun
d ba
r cov
erSe
iten
führ
ungs
profi
leSi
de g
uide
pro
files
Rohr
eTu
bes
Clip
-Pro
file
Clip
-pro
files
Spez
ial-
Profi
leSp
ecia
l-pr
ofile
sB
andm
ater
ial
Wea
r str
ips
Folie
nFi
lm
24 | Röchling Industrial
Polystone® M Extrudierte Profile | Extruded profiles
R369
4,2
9
25
8
R386 75
56
110
10
R28
R2
12,5
30
2232
R29
15
5
32
40
5
R523
8
15
20
25
R26
R4
26
40
3036
R24710
14
2,8
6,4 1,81,8
R167
2
106,1
3
14,6
42
R16914
,6
11,6
15,5R234
126,2
4,2
15,4
R660
18,5
24
20
7,5 7,53,5
R678
6,33,2
1,5
2,3
9
R671
72
212
2,52
R673
12,3
13,5
6
3,5
2
R30
25,3
2843
8
25,5
R345
18
3
10
8
R42
46
3018
52
29
R150
1513
6,210,8
R68
44
20
2548
R76
5038
46
10
Rollenlänge ca. 60 mLength per roll ca. 60 m
U-ProfileU-profiles
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
Röchling Industrial | 25
Polystone® M Extrudierte Profile | Extruded profiles
R213
14
103 1
17
6,1
R628
12
20
13,5
4,5
R1,5
3
R1
133 5
Rollenlänge ca. 60 mLength per roll ca. 60 m
U-ProfileU-profiles
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
Z-Pr
ofile
Z-
profi
les
Klem
mpr
ofile
Clam
p-pr
ofile
sL-
Profi
le (W
inke
l)L-
profi
les
(ang
les)
T-Pr
ofile
T-pr
ofile
sU
-Pro
file
U-p
rofil
esC-
Profi
leC-
profi
les
Hal
brun
d-Pr
ofile
Roun
d ba
r cov
erSe
iten
führ
ungs
profi
leSi
de g
uide
pro
files
Rohr
eTu
bes
Clip
-Pro
file
Clip
-pro
files
Spez
ial-
Profi
leSp
ecia
l-pr
ofile
sB
andm
ater
ial
Wea
r str
ips
Folie
nFi
lm
26 | Röchling Industrial
Polystone® M Extrudierte Profile | Extruded profiles
R15
Für Flachstahl 20 x 3for steel 20 x 3
32
11,5
21,5
4,5
3,2
10,5
R16 R18
41
2031,5
10,5
Für Flachstahl 30 x 3for steel 30 x 3
R172
40
11
29,4
25
Für Flachstahl 50 x 4for steel 50 x 4
60
3551
10
R21
504135
16
10,3
3
Für Flachstahl 40 x 10for steel 40 x 10
R19
Für Flachstahl 70 x 6for steel 70 x 6
71
12 1281
16,5
R112
Für Flachstahl 40 x 8for steel 40 x 8
42
50
15 8,5
R120
6,35
11,3
4052,260
R127
41
36,5
30
6,3
312
Für Flachstahl 35 x 6for steel 35 x 6
Für Flachstahl 50 x 6for steel 50 x 6
R226
10,2
26,2
3,4
4
39,929,8
R160
8
50,5
42 ,5
8
28,3
20,3
R94
Für Flachstahl 50 x 6for steel 50 x 6
52,5
6,5
60
13
R227
50
6,5
3
12
4130
Für Flachstahl 30 x 3for steel 30 x 3
Für Flachstahl 40 x 6for steel 40 x 6
R265
60
81
90
5,5
14,5
Für Flachstahl 80 x 5for steel 80 x 5
R331
40,5
50
1610
Für Flachstahl 40 x 10for steel 40 x 10
R533
41
30,8
10,2
R536
40
30,5
10
3,2
R674
61
50,5
40
15
56,
5
3,5
R626
20,45
15,65
14,45
7,85
3,45
0,75
2
3
2,4
R619
2,5
2
42
36,130,426,4
9
16
3
Rollenlänge ca. 60 mLength per roll ca. 60 m
C-ProfileC-profiles
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
Röchling Industrial | 27
Polystone® M Extrudierte Profile | Extruded profiles
Z-Pr
ofile
Z-
profi
les
Klem
mpr
ofile
Clam
p-pr
ofile
sL-
Profi
le (W
inke
l)L-
profi
les
(ang
les)
T-Pr
ofile
T-pr
ofile
sU
-Pro
file
U-p
rofil
esC-
Profi
leC-
profi
les
Hal
brun
d-Pr
ofile
Roun
d ba
r cov
erSe
iten
führ
ungs
profi
leSi
de g
uide
pro
files
Rohr
eTu
bes
Clip
-Pro
file
Clip
-pro
files
Spez
ial-
Profi
leSp
ecia
l-pr
ofile
sB
andm
ater
ial
Wea
r str
ips
Folie
nFi
lm
R338
40
31,5
10
3,2
R200,5
R381
32
40
179
R341
30
47
41
93
3R585
3,5
47,7
41,7
3
20,5
4
27,5
R0,5
R1,5R150
R60347,5
41
R1
14
4
1
2,5
41,3 51
,13,
3
R2
R13190
65
82
16,5
Für Flachstahl 80 x 6for steel 80 x 6
R161
30,5
40
10
20
11,5
3,7
5
5 4,5
R188
908160
4
4
5,4
3,7
22,6
R214
90
8240
12
16 14
Für Flachstahl 80 x 6for steel 80 x 6
Für Flachstahl 80 x 5for steel 80 x 5
R129
Für Flachstahl 40 x 8for steel 40 x 8
16,5
8,5
5
50
34
28,5
42
23
8 8
R130
Für Flachstahl 40 x 8for steel 40 x 8
50
28, 5
42
16,5
8,5
3
R289
32,5
26,5
32,5
R431
20
6,7
2
9,1
12,4
R260
43
50
19
423,
352
R545
32,7
21,5
25,3
6,3
16
R395
90
81
20 5
5
19
5,4
R244
6
74,5
2,2
R276
52
46
7,7
31,7
R373
85 55
65
11,7
R668
86
80,5
8 3
4,5
2
2,75
0,789
Rollenlänge ca. 60 mLength per roll ca. 60 m
C-ProfileC-profiles
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
28 | Röchling Industrial
Polystone® M Extrudierte Profile | Extruded profiles
R111
55
18
10244,5
5
R115
52
65
10
R113
12,9
20
6
R428
38,1
12,5
9
6,5
R363
35
12,7
9
6,5
R126
25,2
1,9
9
12
1,7
6,6
R570
10
136
9
8,5
4218
R64
10,5
20 20
31
60
14
R572
6
136
9
8,5
4218
F
R301
68
24
12,5
4
8,5
4128,5
Für Flachstahl 40 x 8for steel 40 x 8
R313
20
18 42
136
9
8,5
R330
40136
18 42
8,5
9
R26481
25
40,5
50
8,5 23
R6
Für Flachstahl 40 x 8for steel 40 x 8
R245
10
74
4
2,2
R397
90
81
44
18
5,4
R676
10051
20 2 6
7
6414
40
6 10219
2
R679
22,9
4,33,7
3,8
3,40,
9
312,9
11,
92
5
74,
9 6,4
10,7
11,7
1
1,4
5,6
R0,5
R629
80
47
3121 5 3
89,
5 5
3
R300
61,
8
2012
8,6
9,3
R396
90
81
12
5
14
5,4
Rollenlänge ca. 60 mLength per roll ca. 60 m
C-ProfileC-profiles
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
Röchling Industrial | 29
Polystone® M Extrudierte Profile | Extruded profiles
Z-Pr
ofile
Z-
profi
les
Klem
mpr
ofile
Clam
p-pr
ofile
sL-
Profi
le (W
inke
l)L-
profi
les
(ang
les)
T-Pr
ofile
T-pr
ofile
sU
-Pro
file
U-p
rofil
esC-
Profi
leC-
profi
les
Hal
brun
d-Pr
ofile
Roun
d ba
r cov
erSe
iten
führ
ungs
profi
leSi
de g
uide
pro
files
Rohr
eTu
bes
Clip
-Pro
file
Clip
-pro
files
Spez
ial-
Profi
leSp
ecia
l-pr
ofile
sB
andm
ater
ial
Wea
r str
ips
Folie
nFi
lm
R430
6
5462
15
12,218
,5
R416
5262
15 3,5
16,5
R412
5427
62
15
14
R571
58,5
52,5
23
5
3 2,5
210
R432
5262
15 3,58,
214,5
R548
32,3
26
13 20
R22
49
23
41
15,5
36,
5
28
R579
80
2,5
50
41
28,5
4
16,5
2,5 8,
5R6
R2
R272
166,
7
41,4
49
R1
R443
7844
17,7
4,3
R554
65 ±0,5
45
2352,5
2,5
2,5
3
11±0
,5
R353
80
41,5
18,5 9
6
R620
52,5
80
3
23
102
2,5
R621
80
8
52,5
23
R 1,5
102
10
5
2,5
3
R240
10144
175
Rollenlänge ca. 60 mLength per roll ca. 60 m
C-ProfileC-profiles
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
30 | Röchling Industrial
Polystone® M Extrudierte Profile | Extruded profiles
R592
90°
Ø 2 0
Ø 1 5
0,5
R11
60�
1217
R95
14,3
9
R97
25
12
15
R283
21,5
9,3
13,5
2,5
R11
R8
R425
Ø 1 3Ø 8
Für Rundstahl ø 12 mmfor roundbar ø 12 mm
Für Rundstahl ø 10 mmfor roundbar ø 10 mm
Rollenlänge ca. 60 mLength per roll ca. 60 m
Rollenlänge ca. 60 mLength per roll ca. 60 m
Für Rundstahl ø 8 mmfor roundbar ø 8 mm
Halbrund-Profil Round bar cover
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
Röchling Industrial | 31
Polystone® M Extrudierte Profile | Extruded profiles
Z-Pr
ofile
Z-
profi
les
Klem
mpr
ofile
Clam
p-pr
ofile
sL-
Profi
le (W
inke
l)L-
profi
les
(ang
les)
T-Pr
ofile
T-pr
ofile
sU
-Pro
file
U-p
rofil
esC-
Profi
leC-
profi
les
Hal
brun
d-Pr
ofile
Roun
d ba
r cov
erSe
iten
führ
ungs
profi
leSi
de g
uide
pro
files
Rohr
eTu
bes
Clip
-Pro
file
Clip
-pro
files
Spez
ial-
Profi
leSp
ecia
l-pr
ofile
sB
andm
ater
ial
Wea
r str
ips
Folie
nFi
lm
ProfileProfiles
AußendruchmesserOutside diameter
InnendurchmesserInside diameter
R390 28 22,8
R346 43 37
R669 50 18,5
R511 50,6 30,8
R307 51 44
R308 63 55
R314 80 67
R680 83 30
R347 90 80
R358 97,2 78,9
R383 100 90
R366 128 104
R348 136 120
R661 148 126
R367 160 136
R368 200 176
Rohre Tubes
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
32 | Röchling Industrial
Polystone® M Extrudierte Profile | Extruded profiles
R14
25
23,7
16 9 6
R13
916,4
19,5
16
1,9
3,5
R33
9,5
14,9
6,5
5,7
R35
31,722
52
25
132,
8
R78
2810,5
13,523,5
2,6
5,5
15
2,6
R207
3820
31
12
26,5
3,5
R40114
11,1
13,6
5
17
17
R6,5
R402
14
11,2
14
R1
11
17
17
R40314
11,2
14
R17
17
17,5
R485
17
57,15
21
R558
20
10,8
3,8
2
9
15,8
R665
20
11
9
7,5
34
2
SeitenführungsprofileSide guide profiles
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
Röchling Industrial | 33
Polystone® M Extrudierte Profile | Extruded profiles
R196
4010
7,8
4
5
12,9 17
,98,
8
R197
4010
7,8
4
5
12,9 17
,930
8,8
32
R77
20
11,5
210,1
23,
6 6,6
R156
4,7
16
2
8,5
7
R157
24
6,1 3,
6
9,9
37,877
R597208,3
9,25,
23
10
5
0,5
R0,5
R2
R0,3
30°
120°
R598
15
4012,8
8
13,88,
24
R0,4
R3
R1
120°
0,5
30°
R90
4
32
137,
9
R250
32
7,512
27
28,2
2
R87
48
32
156,
550
15 ,2 14,6
R249
15,4
20,4
7,5
3,1
40
Clip-Profile Clip-profiles
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
Z-Pr
ofile
Z-
profi
les
Klem
mpr
ofile
Clam
p-pr
ofile
sL-
Profi
le (W
inke
l)L-
profi
les
(ang
les)
T-Pr
ofile
T-pr
ofile
sU
-Pro
file
U-p
rofil
esC-
Profi
leC-
profi
les
Hal
brun
d-Pr
ofile
Roun
d ba
r cov
erSe
iten
führ
ungs
profi
leSi
de g
uide
pro
files
Rohr
eTu
bes
Clip
-Pro
file
Clip
-pro
files
Spez
ial-
Profi
leSp
ecia
l-pr
ofile
sB
andm
ater
ial
Wea
r str
ips
Folie
nFi
lm
34 | Röchling Industrial
Polystone® M Extrudierte Profile | Extruded profiles
R12
65
618
R88
45
4
20
R89
4
20
64
R116
20
10
42
11
R134
6
20
5
11
R135
6
15
4
11
R136
11
5
30
11
R139
5
42,2
16
12
R143
65
11
15
R212
41
4,1
16
4,1
12
R67
R12
R1 4
23 11
6 6
14,5
3
13 17
R48
3419 7,5
2233
16
23
R65
R1,5
3
13 2317 11
R1,5
14,5
6 6
R66
R16R1 0
17 11
6 6
14,5
4
R1 ,5
2
59
23
R36540
18
29
20 17
19,5
R515
12,8
9,8
19,1
3
21,2
33,3 ±0,5
R326
30,8
3
16,5
19
R242
2,716,3
23
9
R251
36,5
5,9
20106
R294
388,9
3 10
19,3
Spezial-ProfileSpecial-profiles
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
Röchling Industrial | 35
Polystone® M Extrudierte Profile | Extruded profiles
R252 R253
10,5
23
16,5
17
13,4
2821,2
19
R576
70,7
3
62,9
7
25,0
6
9
30°
R10
R7R7
R4
R73
15
3
3,99
7
20
8,04
R389
ø31
33,33 33,5
ø14
R1
92±1
,2
R10
132,
5
R52850
1
10,6
26
26
R591
86 744
3,5
5 4 0
R4,63
1x4
5°
4,54,67
1217
30 141
R361
53
34
8
35
50,3
4
Spezial-ProfileSpecial-profiles
Standardlänge: 6000 mm oder Rollenware Qualitäten: M-natur, M-schwarz, M-grün (PE-UHMW/PE 1000)
Standard length: 6000 mm or in coils Qualities: M-natural, M-black, M-green (PE-UHMW/PE 1000)
Toleranzen nach DIN 16941-3a und/oder gesonderter Vereinbarung
Tolerances according to DIN 16941-3a and/or separate agreement
Z-Pr
ofile
Z-
profi
les
Klem
mpr
ofile
Clam
p-pr
ofile
sL-
Profi
le (W
inke
l)L-
profi
les
(ang
les)
T-Pr
ofile
T-pr
ofile
sU
-Pro
file
U-p
rofil
esC-
Profi
leC-
profi
les
Hal
brun
d-Pr
ofile
Roun
d ba
r cov
erSe
iten
führ
ungs
profi
leSi
de g
uide
pro
files
Rohr
eTu
bes
Clip
-Pro
file
Clip
-pro
files
Spez
ial-
Profi
leSp
ecia
l-pr
ofile
sB
andm
ater
ial
Wea
r str
ips
Folie
nFi
lm
36 | Röchling Industrial
Polystone® M Extrudierte Profile | Extruded profiles
BandbreiteWidth
Bandlänge bei BanddickeLength at thickness
mm 1 mm 2 mm 3 mm 4 mm 5 mm 6 mm 7 mm 8 mm
15
270 m 135 m 85 m 65 m 50 m 40 m
_ _18
20
25
30
35
40
45
50
55
60
70
_
80
160 m 80 m 50 m 38 m 32 m 25 m 22 m90
100
110
Bandmaterial, geschältWear strips, skived
• für Ketten nach DIN 8187
• for chains to DIN 8187
Bemerkungen: Sonderabmessungen auf Anfrage. Max. Abmessungen: 300 mm Breite, 0,25 - 3 mm Dicke. Toleranzen: Dicke +0,1/-0,3 mm, Breite ±0,3 mm
Notes: Special dimensions on request. Max. dimension: 300 mm width, 0.25 - 3 mm thickness. Tolerances: Thickness +0.1/-0.3 mm, Width ±0.3 mm
35 m 30 m
Röchling Industrial | 37
Polystone® M Extrudierte Profile | Extruded profiles
Z-Pr
ofile
Z-
profi
les
Klem
mpr
ofile
Clam
p-pr
ofile
sL-
Profi
le (W
inke
l)L-
profi
les
(ang
les)
T-Pr
ofile
T-pr
ofile
sU
-Pro
file
U-p
rofil
esC-
Profi
leC-
profi
les
Hal
brun
d-Pr
ofile
Roun
d ba
r cov
erSe
iten
führ
ungs
profi
leSi
de g
uide
pro
files
Rohr
eTu
bes
Clip
-Pro
file
Clip
-pro
files
Spez
ial-
Profi
leSp
ecia
l-pr
ofile
sB
andm
ater
ial
Wea
r str
ips
Folie
nFi
lm
BreiteWidth
Folienlänge | Length
Foliendicke/Thickness
mm 0,25 0,50 0,75 1,00 1,25 1,50 1,75 2,00 2,25 2,50 2,75 3,00
100 ... 300 136 m 68 m 45 m 34 m 27 m 22 m 19 m 17 m 15 m 13 m 12 m 11m
Folien, geschältFilm, skived
1) Folien sind in jeder gewünschten Breite von 100 – 300 mm lieferbar
1) Films are deliverable in a width of 100 – 300 mm
38 | Röchling Industrial
Polystone® M Extrudierte Profile | Extruded profiles
Technische DatenTechnical data
Bei den angegebenen Werten handelt es sich um Mittelwerte, die durch ständige statistische Prüfun-gen abgesichert sind. Sie entsprechen den Vorgaben der DIN EN 15860. Diese Daten sind reine Be-schaffenheitsangaben und führen nur bei ausdrücklicher Verein-barung zukaufverträg-licher Zusicherung.
The data stated above are average values ascertained by statistical test on a regular basis. They are in accordance with DIN EN 15860. The data above are provided purely for information and shall not be regarded as binding unless expressly agreed in a contract of scale.
EigenschaftenProperties
TestmethodeTest method
EinheitUnit
WerkstoffMaterialPolystone® M(PE-UHMW/ PE 1000)
Allgem. Eigenschaften | General properties
DichteDensity
DIN EN ISO 1183-1
g/cm3 0,93
FeuchtigkeitsaufnahmeWater absorption
DIN EN ISO 62 % < 0,01
Brennverhalten (Dicke 3 mm / 6 mm)Flammability (Thickness 3 mm / 6 mm)
UL 94 - HB
Mechanische Eigenschaften | Mechanical properties
StreckspannungYield stress
DIN EN ISO 527 MPa 20
ReißdehnungElongation at break
DIN EN ISO 527 % > 200
E-ModulTensile modulus of elasticity
DIN EN ISO 527 MPa 680
KerbschlagzähigkeitNotched impact strenght (charpy)
DIN EN ISO 179 kj/m2 kein Bruch/no break
Shore HärteShore hardness
DIN EN ISO 868 Skala D/ scale D
63
VerschleißfestigkeitWear resistance
Sand-slurry - 80
Thermische Eigenschaften | Thermal properties
SchmelztemperaturMelting temperature
ISO 11357-3 °C 135
WärmeleitfähigkeitThermal conductivity
DIN 52612-1 W/(m*k) 0,40
WärmekapazitätThermal capacity
DIN 52612 kJ (kg*K) 1,90
Linearer AusdehnungskoeffizientCoefficient of linear thermal expansion
DIN 53752 10-6K-1 150 - 230
Einsatztemperatur langfristigService temperature, long term
Richtwerte Average
°C -250…80
Einsatztemperatur kurzfristig (max.)Service temperature, short term (max.)
Richtwerte Average
°C 130
WärmeformbeständigkeitHeat deflection temperature
DIN EN ISO 306,Vicat B
°C 79
Elektrische Eigenschaften | Electrical properties
DielektrizitätszahlDielectric constant
IEC 60250 - 2,3
Dielektrischer Verlustfaktor (106 Hz)Dielectric dissipation factor (106 Hz)
IEC 60250 - 0,0001
DurchgangswiderstandVolume resistivity
IEC 60093 Ω*cm > 1014
OberflächenwiderstandSurface resistivity
IEC 60093 Ω > 1014
Vergleichszahl der KriechwegbildungComparative tracking index
IEC 60112 - 600
DurchschlagfestigkeitDielectric strenght
IEC 60243 kV/mm 45
Röchling Industrial | 39
Allgemeine Hinweise | General Information
Allgemeine Hinweise
Alle in diesem Lieferprogramm enthaltenen Informationen wurden nach bestem Wissen recherchiert. Dennoch sind Fehler nicht ganz auszuschließen. Aus diesem Grunde sind die im vorliegenden Liefer-programm enthaltenen Informationen mit keiner Verpflichtung oder Garantie irgendeiner Art verbunden. Wir übernehmen daher infolge-dessen keine Verantwortung und werden keine daraus folgende oder sonstige Haftung für Schaden übernehmen, die auf irgendeine Art aus der Benutzung dieser Informationen entstehen. Auch für die Vollstän-digkeit der erfassten Produkte, Verfahren, Eigenschaften etc. kann keine Gewähr übernommen werden.
Dieses Werk ist urheberrechtlich geschützt. Alle Rechte, auch die der Übersetzung, des Nachdrucks und der Vervielfältigung und/oder Tei-len daraus sind Röchling Industrial vorbehalten. Kein Teil des Werkes darf ohne schriftliche Genehmigung von Röchling Industrial, egal zu welchem Zweck oder in welchem Medium, vervielfältigt, verarbeitet oder verbreitet werden.
Mit Erscheinen dieses Drucks verlieren frühere Ausgaben ihre Gültigkeit.
© 2018 Röchling
General Information
All information contained in this delivery programme has been researched to the best of our ability. Despite our best efforts, this does not exclude the possibility of errors. For this reason, the information contained in this supply range is unconditional and carries no guarantees of any kind. Therefore, we assume absolutely no liability for any damages resulting from this information, nor any other form of liability, which in any way results from the information contained herein. We assume no liability for the completeness of the included products and information, processes, properties, etc.
This work is protected by copyright. Röchling reserves all rights, including those for the translation, reprints and the reproduction and/or excerpting herefrom. No part of this work is permitted to be copied, processed or distributed, regardless of intended purpose or medium, without the express written consent of Röchling Industrial.
Upon publication of this document all previous editions shall become void.
© 2018 Röchling
EUROPEGermanyRöchling Engineering Plastics SE & Co. KGRöchlingstr. 1 | 49733 HarenTel. +49 5934 701-0Fax +49 5934 [email protected]
Röchling Lützen SE & Co. KGPlanckstr. 3 | 06686 LützenTel. +49 34 444 308-200Fax +49 34 444 [email protected]
Röchling Hydroma GmbHLemberger Str. 101 | 66957 RuppertsweilerTel. +49 6395 [email protected]/hydroma
Röchling Roding GmbHBayerschmidtweg 1 | 93426 RodingTel. +49 9461 [email protected]/roding
Röchling Sustaplast SE & Co. KG FormtechnikLahnstr. 22 | 56412 NentershausenTel. +49 6485 [email protected]
DenmarkRöchling Meta-Plast A/STøjstrupvej 31 | 8961 AllingâbroTel. +45 8648 [email protected]
FranceRöchling Engineering Plastiques S.A.S.2, Rue de Barcelone69153 Décines CedexTel. +33 472 148960roechling.decines@roechling-engineering.frwww.roechling.com
Great BritainRöchling Engineering Plastics (UK) Ltd.Waterwells Drive | Quedgeley | Gloucester GL2 2AATel. +44 1452 [email protected]/gloucester
Röchling Fibracon Ltd.Bowden Hey Road | Chapel-en-le-FrithSK23 0QZ High Peak | DerbyshireTel. +44 1298 811800info@roechling-fi bracon.co.ukwww.roechling.com/highpeak
Röchling Insoll Ltd.39 Wilbury Way | SG4 0TW Hitchin | HertfordshireTel. +44 1462 [email protected]/hitchin
ItalyRöchling Machined Plastics Italia s.r.lVia Morena 66 | 28024 GozzanoTel. +39 0322 [email protected]
LatviaMeta-Plast S/AKapsedes Str. 2 | LV-3402 LiepãjaTel. +371 6348 [email protected]
AustriaRöchling Leripa Papertech GmbH & Co.KGRöchlingstr. 1 | 4151 OeppingTel. +43 7289 [email protected]
SpainRöchling Plásticos Técnos S.A.U.Ctra. Villena | s/n. - Apartado 34 | 46880 BocairentTel. +34 962 [email protected]
Czech RepublicRöchling Engineering Plastics, s.r.o.Pr ůmyslová 70539111 Planá nad LužnicíTel. +420 381 [email protected]
ASIAChinaRoechling Machined Components(Kunshan) Co., LtdNo. 238 Chenfeng Road Kunshan CityJiangsu Province 215300Tel. +86 512 [email protected]
IndiaRöchling Engineering Plastics(India) Pvt. Ltd.701, 'A' Wing | Leo Building24th Road | Khar West | 400 052 MumbaiTel. +91 22 [email protected]
USARöchling Leripa Papertech LLC710 Ford Street Kimberly | Wisconsin 54136Tel. +1 920 954 [email protected]
Röchling Machined Plastics161 Westec Drive15666 Mount Pleasant PA Tel. +1 724 [email protected]
Röchling Industrial. Empowering Industry.
www.roechling.com
10/2
018
| 104
39-0
9038