fc cummins
TRANSCRIPT
7/24/2019 FC Cummins
http://slidepdf.com/reader/full/fc-cummins 1/2
umm ns nc., ox , o um us, - . . . Printed from QuickServe Online
All Rights Reserved. Last Modified: 20-Dec-2012
File: 60-fc144 Page 1 of 2
Fault Code 144
Engine Coolant Temperature 1 Sensor Circuit - Voltage Above Normal or Shorted to HighSource
CODES REASON EFFECT
Fault Code: 144
PID(P), SID(S):SPN: 110FMI: 3Lamp: Amber SRT:
Engine Coolant Temperature 1
Sensor Circuit - Voltage AboveNormal or Shorted to HighSource. High signal voltagedetected at engine coolanttemperature circuit.
Possible white smoke. Fan will stay ON if
controlled by ECM. No engine protection for engine coolant temperature.
Engine Coolant Temperature 1 Sensor Circuit - QST30 Power Generation Interface Engine
Circuit Description:
The engine coolant temperature 1 sensor is used by the ECM to monitor the engine coolant temperature. The ECMmonitors the voltage on the signal pin and converts this to a temperature value. The engine coolant temperature valueis used by the ECM for the engine protection system and for engine emissions control.
Component Location:
The engine coolant temperature 1 sensor is located on the thermostat housing. Refer to Procedure 100-002 in SectionE .
Shop Talk:
Before troubleshooting Fault Code 144, check for multiple faults.
The engine coolant temperature 1 sensor shares return wires in the engine harness with other sensors. An openreturn can cause multiple fault codes to be active.
Possible causes of this fault code include:
• Open return circuit in the harness, connectors, or sensor • Open signal circuit or shorted to a voltage source.
Refer to Troubleshooting Fault Code t05-144
7/24/2019 FC Cummins
http://slidepdf.com/reader/full/fc-cummins 2/2
umm ns nc., ox , o um us, - . . . Printed from QuickServe Online
All Rights Reserved. Last Modified: 20-Dec-2012
File: 60-fc144 Page 2 of 2