修正ヤスリ modification ffiles...et20にはetb21が1枚ついています。 a etb21 is...

1
BEST QUALITY SAVES MONEY 45 修正ヤスリ MODIFICATION FILES 257 エッジトリマー  EDGE TRIMMER ETB21(荒刃)・ETB22(仕上げ刃) サイド面を削るとき 〈図1〉のような標準の形態でご使用下さい。 For finishing“Side Face”, it's used like〈fig.1〉. 45°に面取りするとき 〈図2〉のように、替刃を裏面にはめこんでご使用下 さい。取り付け方は、替刃をBの溝に固定してから、 Aの方に押しこんで下さい。 取りはずす時は、コイン等を差し込んでひねっては ずして下さい。 For facing the angle 45° , it's used like〈fig.2〉. At first the blade is fixed on B, and pushed in A by hand. Then in order to care your hand, please take gloves on hand. When the blade is taken off, please insert and twist a coin, like〈fig.2〉. ETB23(万能刃タイプ-ネジ止め) 上面を削るとき 〈図3〉のような、中央でネジ止めするタイプのETB23 をご使用下さい。 For finishing“Front Face” , ETB23 is used like〈fig.3〉 . ETB21・ETB22・ETB23 90°角の突き合せ両面を仕上げるとき 図1と図3を合わせて使用し、2枚の刃で90°角をつく り、ご使用下さい。〈図4〉 For facing the angle 90° , it's used like〈fig.4〉 assorting〈fig.1〉with〈fig.3〉. ITEM No. 荒 刃Bastard 100 30 × 4.5 10 0.8 ETB 21 仕上刃Smooth 0.8 ETB 22 万能刃All-around 1.15 ETB 23 W×T ㎜ DIMEN -SION TYPE pcs kg-10pcs 規格表 STANDARD TABLE ITEM No. 114 53 × 51 0.18 ET 20 kg-1p A×B 用 途 木、石膏ボード、プラスチック、金属のエッヂ仕上げに。 Use:For finishing the board-edges of Wood, Plastics, Plaster Board, Metals etc. 荒 刃 ETB21 仕上刃 ETB22 万能刃 ETB23 BOX A B 〈図1〉 〈fig.1〉 替刃 Blade 〈図2〉 〈fig.2〉 COIN 替刃 Blade A B 〈図3〉 〈fig.3〉 ネジの Screw 〈図4〉 〈fig.4〉 90° ET20にはETB21が1枚ついています。 A ETB21 is attached to a ET20.

Upload: others

Post on 04-Sep-2020

7 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: 修正ヤスリ MODIFICATION FFILES...ET20にはETB21が1枚ついています。 A ETB21 is attached to a ET20. Created Date 10/26/2007 1:31:52 PM

BEST QUALITY SAVES MONEY45

修正ヤスリ MMOODDIIFFIICCAATTIIOONN FFIILLEESS

修正ヤスリ

257エッジトリマー EDGE TRIMMER

縡 ETB21(荒刃)・ETB22(仕上げ刃)サイド面を削るとき〈図1〉のような標準の形態でご使用下さい。For finishing“Side Face”, it's used like〈fig.1〉.

45°に面取りするとき〈図2〉のように、替刃を裏面にはめこんでご使用下さい。取り付け方は、替刃をBの溝に固定してから、Aの方に押しこんで下さい。取りはずす時は、コイン等を差し込んでひねってはずして下さい。For facing the angle 45°, it's used like〈fig.2〉.At first the blade is fixed on B, and pushed in A by hand. Then in order to care your hand, pleasetake gloves on hand.When the blade is taken off, please insert and twista coin, like〈fig.2〉.

縒 ETB23(万能刃タイプ-ネジ止め)上面を削るとき〈図3〉のような、中央でネジ止めするタイプのETB23をご使用下さい。For finishing“Front Face”, ETB23 is used like〈fig.3〉.

縱 ETB21・ETB22・ETB2390°角の突き合せ両面を仕上げるとき図1と図3を合わせて使用し、2枚の刃で90°角をつくり、ご使用下さい。〈図4〉For facing the angle 90°, it's used like〈fig.4〉assorting〈fig.1〉with〈fig.3〉.

ITEM No.

荒 刃Bastard100 30 × 4.5 10

0.8 ETB 21仕上刃Smooth 0.8 ETB 22万能刃All-around 1.15 ETB 23

W×T ㎜

DIMEN-SION

TYPE pcskg-10pcs㎜

規格表 STANDARD TABLE

ITEM No.

114 53× 51 0.18 ET 20kg-1pA×B㎜ ㎜

■用 途●木、石膏ボード、プラスチック、金属のエッヂ仕上げに。

■Use:For finishing the board-edges of Wood, Plastics,Plaster Board, Metals etc.

荒 刃ETB21

仕上刃ETB22

万能刃ETB23

BOX

A

B

〈図1〉 〈fig.1〉

替刃 Blade

〈図2〉 〈fig.2〉

COIN

替刃 Blade

A

B

〈図3〉 〈fig.3〉 ネジの   頭 Screw

〈図4〉 〈fig.4〉

90°

ET20にはETB21が1枚ついています。A ETB21 is attached to a ET20.