fication and new product information after march ... -...
TRANSCRIPT
Compatibilities are subject to change without priornotice. Issued on March 14, 2005 SHIMANO INC.
2005-2006
Products compatibility information
137
Co
mb
inatio
n &
Interch
ang
eability
Drivetrain InterchangeabilityDrivetrain Interchangeability
Rear derailleur (RD)Cassette sprocket (CS) Chain (CN)
Chain (CN)Rear derailleur (RD)Cassette sprocket (CS)
8-Speed HG
Mega-9 Drivetrain (9-speed HG)
CN-HG50CN-HG40
HG chain
RD-M960RD-M952RD-M800RD-M760RD-M750RD-M570RD-M510RD-C900RD-C600
RD-M580RD-M600RD-M805RD-M530RD-M751RD-M571RD-M511
Mega-9rear derailleur CN-7701
CN-HG93CN-HG73CN-HG53
CS-M960 (ba,ap,as)CS-M760 (aq,as)CS-HG70-9 (ar/au)CS-HG50-9 (ar/au)CS-M580
Mega-9cassettesprocket
9-speed HG
Mega-9 chainSuper
Narrow HG
Rear derailleur (RD)Cassette sprocket (CS) Chain (CN)
8-Speed LinkGlide
RD-C810RD-C505RD-C531
8-speedrear derailleur
CN-HG73
CN-HG53
CS-LG50 LinkGlidecassettesprocket8-speed
Mega-9 chainSuper
Narrow HG
* The rear derailleur for 8-speed can also be used for 7-speed drivetrain.
CS-HG60-8ICS-HG40-8I
11T-34T
CS-HG50-8I(an, aw) 11T-30T
CS-HG30-8I(an, aw)11T-30T
8-speed HGcassettesprocket
CS-HG60-8I (ao)CS-HG40-8I (ao)
11T-34T
RD-M410 SGSRD-M340RD-CT95
8-speedSmart
When using components of different series together, be aware of the points given below. “New” is shown if it is a new product and “MC” is given if only minor changes have been made.
New
New
New
New
New
New
The full performance of LinkGlide will not be realized in combinations other than these. Also, HG performance will be reduced if RD-C505, C531 and C810 are used with HG gears other than LinkGlide gears. LinkGlide shifting performance is achieved when combined with ST-C503-A(R) as the shifting lever.(RD-C505/C531)
Rear drivetrain for Comfort & MTB Components
ARCHIVE
138
Co
mb
inatio
n &
Interch
ang
eability
Rear derailleur (RD)
MF-ZH06MF-TZ06
RD-TY186-speed
GS/SS
Multiple freewheel (MF)
7/6-speed/"SMARTCAGE"
MF-HG22
MF-ZH36Top normal
14-28T
RD-FT30
14-28T
13-34T
(
7-speed/MGSLow normal
Multiple freewheel (MF)
14-34T
14-28T
11-34T
MF-HG37MF-TZ07
RD-FT3011-28TMF-HG50-7
MF-HG40-7MF-TZ37
MF-HG50-7 RD-T300
7/6-speed/"SMARTCAGE"
Top normal
13-34TMF-ZH37RD-TX70RD-TX50RD-TX30
MF-Z015-5
Rear derailleur (RD)Multiple freewheel (MF)
5-speed UG
6-speed HG/ZH
RD-TY155-speed
GS/SS
Rear derailleur (RD)
CS-HG30-I RD-CT957-speed
rear derailleur
CN-HG50CN-HG40CN-UG51
HG/UGchain
Cassette sprocket (CS)
CS-HG-50-I RD-T300 7-speedMGS
11-34T
7-speed HG/ZH
Chain (CN)
UG
CS-HG50ICS-HG30I
7-speed HGcassettesprocket
RD-M340 7-speedrear derailleur
Rear derailleur (RD)Cassette sprocket (CS)
7-speed HG
HG chain can only be used when using an HG compatible crankset
RD-TX70RD-TX50RD-TX30
CN-HG50CN-HG40 HG chain
Low normal
*
Drivetrain Interchangeability
NEW
NEW
(Front single)
(Front single)
ARCHIVE
139
Co
mb
inatio
n &
Interch
ang
eability
Drivetrain Interchangeability
Rear drivetrain for Road bike components
SORA2200 series
DURA-ACEULTEGRA
105TIAGRA
DURA-ACEULTEGRA
105
ST-7700-BST-7700-C
ST-R500ST-3300
RD-3300RD-2200
CS-7700CS-6500
CS-HG70-9CS-HG50-9
ST RD CS FH
ST-6510ST-5510ST-4400ST-R600
RD-7800RD-6600RD-5600
Note-1: Can not use this combination with a spoke protector.Note-2: CS-6600; Do not use front triple chainwheel with 14, 15, 16 top sprockets combination.
FH-7801
9-speed
9-speed
10-speed
8-speed
CN-7701CN-HG93CN-HG73CN-HG53
CN
b a-2
4T b a-2
1T b a-1
9Tab
-17T ab
-15T
ab-1
3T12T
11T
HYP E R G L I D E - C J A P A N
U. S . PAT4268259
LOCK400kg/cm
ONAMI HS
ST-7801ST-6600ST-5600ST-R700
CS-7800CS-6600CS-5600
(11, 12T TOP)
10-speed
RD-6500RD-5501RD-4400
FH-6600FH-5600FH-7700FH-6500FH-5501FH-4400
8
8-speed
CS-HG90-8CS-HG70-8CS-HG50-8
ULTEGRA
FH-3300FH-2200
CN-HG91,90CN-HG70
CN-HG50
RD-7700
*Note-1
NEW
NEWNEW
NEW
CN-7801CN-6600CN-5600
CS-6600(13, 14, 15, 16T TOP)
NEW
NEW
MC MC
ARCHIVE
140
Co
mb
inatio
n &
Interch
ang
eability
Drivetrain Interchangeability
Interchangeability for flat handlebar
DURA-ACE ULTEGRA
105TIAGRA 9-Speed
DURA-ACE ULTEGRA
10510-Speed
SL-R660SL-R440
CS-7700CS-6500
CS-HG70-9CS-HG50-9
ST RD CS FH
ba-2
4T ba-2
1T b a-1
9Tab
-17T ab
-15T
ab-1
3T12T
11T
HYP E R G L I D E - C J A P A N
U. S . PAT4268259
LOCK400kg/cm
ONAMI HS
RD-7800RD-7700RD-6600RD-6500RD-5600RD-5501RD-4400
CN-7701CN-HG93CN-HG73CN-HG53
CN
ST FD FC CNBB
SORA2200
8-Speed
SORA2200
8-Speed
SL-R440-8ST-R220
CS-HG50-8
ba-2
4T b a-2
1T b a-1
9Tab
-17T ab
-15T
ab-1
3T12T
11T
HYP E R G L I D E - C J A P A N
U. S . PAT4268259
LOCK400kg/cm
ONAMI HS
RD-3300RD-2200
FH-7700FH-6600FH-6500FH-5600FH-5501FH-4400FH-3300FH-2200
CN-7401CN-HG91, 90
CN-HG70CN-HG50
CN-7401CN-HG91,90
CN-HG70CN-HG50
CN-7801CN-6600CN-5600
FC-6503FC-5505
DURA-ACE ULTEGRA
105TIAGRA 9-Speed
SL-R660SL-R440
FC-7701FC-6500FC-5502
SL-R770
FD-R440
FD-R443
BB-7700BB-6500BB-5500
BB-6500BB-5500
CN-7701CN-HG93CN-HG73CN-HG53
FC-3303FC-2203
SL-R440
SL-R770
FD-R440A
FD-R443A
Rear system
Front system
ST-R220
ST-R224
BB-ES71/51/30BB-UN73/53/26
FC-4401
FC-4400
BB-ES71/51/30BB-UN73/53/26
FC-4404FC-4403
FC-7803FC-6603
SM-FC7800
FC-3300FC-2200
FC-3301
BB-UN73BB-UN53BB-UN26
BB-ES71/51/30
FC-3304 BB-ES71/51/30
BB-UN73BB-UN53BB-UN26
SM-FC7800FC-7800FC-6600FC-5600FC-R700
NEW
NEW
FC-5603
NEW
NEW
NEW
NEW
FD-R773-2
FD-R770
FD-R773-0
NEW
NEW
NEW
NEW
RD-7800RD-6600RD-5600
CS-7800CS-6600CS-5600
CN-7801CN-6600CN-5600 NEW
NEW
NEWNEWNEW
NEW
FH-7801FH-6600FH-5600
DURA-ACE ULTEGRA
10510-Speed
MC
Note: CS-6600; Do not use front triple chainwheel with 14, 15, 16 top sprockets combination.
ARCHIVE
FC-M805-3
32-22TFC-M805-2
44-32-22TFD-M805FD-M806
141
Co
mb
inatio
n &
Interch
ang
eability
Drivetrain Interchangeability
FC-M440FC-M540FC-M470FC-M460
44-32-22T
FD-M960FD-M961FD-M960-EFD-M760A-6FD-M760A-3FD-M761A-6FD-M761A-3FD-M760-EFD-M600FD-M601FD-M600-E
FD-M580A-6FD-M580A-3FD-M581A-6FD-M581A-3FD-M580-EFD-M530-6FD-M530-3FD-M531-6FD-M531-3
CN-7701CN-HG93CN-HG73
Front derailleur (FD)Chain (CN)
Mega-9 drivetrain (9-speed HG) / LinkGlide (8-speed)
44-32-22T�44-32-24T
FC-M960
44-32-22T
FC-M760FC-M580FC-M600FC-M530
FC-M800-3
46-34-24TFC-C503FC-C510
FD-M510FD-M511
FD-C510FD-C511
48-36-26T
FC-M510FC-M440FC-M470FC-M540
FD-M510FD-M511
FC-C50546-34-24T
Front derailleur (FD)
Shift lever (ST)
Crankset (FC)
SPCM (TRIPLE)
FD-C505
ST-C505 for SPCM3
CN-HG73
CN-HG53 Rear8-speed
Mega-9 chainSuper
narrow HG
32-22TFC-M800-2, FC-M601-2
48-36-26TFC-M761FC-M581FC-M531
FC-C810
46-34-24TFD-C810
Rear8-speed Di2
SPCM3
SPCM3
Front derailleur (FD)Crankset (FC)
Crankset (FC)
Chain (CN)
SPCM (DOUBLE)
CN-7701CN-HG93CN-HG73
Mega-9 chainSuper
narrow HG
Mega-9 chainSuper
narrow HG
FC-C600 46-34T FD-C6009-speed SPCM
Front drivetrain interchangeability (MTB front SIS)
44-32-22T
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
MC
MC
MC
MC
MC
MC
MC
MC
MC
MC
MC
MC FD-M760A-6FD-M760A-3FD-M761A-6FD-M761A-3FD-M580A-6FD-M580A-3FD-M581A-6FD-M581A-3MC
MC
MC
MC
FD-M530-6FD-M530-3FD-M531-6FD-M531-3
ARCHIVE
42-34-24TFC-TX70
FC-TY33FC-TX71 48-38-28T FD-C102
FD-C050FD-TY10
Rear7/8-
speed
Rear7/8-
speed
42-34-24TRear7/6-
speed
FD-T300
42-34-24TFC-TY40Rear7/8-
speedFD-C101-EFD-CT92-E
FC-TX70
FD-TY30FD-C05148-38-28T
Rear7/6-
speed
FC-TY33FC-TX71
142
Co
mb
inatio
n &
Interch
ang
eability
Drivetrain Interchangeability
Front derailleur (FD)Crankset (FC)Chain (CN)
HG triple (8 and 7-speed)
CN-HG50CN-HG40CN-UG51 UG/HG
chain
FD-T30042-34-24TFC-T300S
48-38-28TFC-T303 FD-T301
Rear7/8-
speed
Rear7/8-
speed
42-32-22T
FC-M415FC-M416FC-M410FC-M411FC-M341FC-M405FC-MC09
Rear7/8-
speedFD-M410FD-M410-E
* When using the front derailleur designed for a 7-speed system on an 8-speed system, the front derailleur plate may interfere with the chain even if it's installed correctly.
New
New
New
NewNew
New
New
New
New
Updated
ARCHIVE
143
Co
mb
inatio
n &
Interch
ang
eability
Drivetrain Interchangeability
Front drivetrain interchangeability (Road bike components)
ST-7700-BST-7700-C
FD-7700FD-6500FD-5501FD-4400
DURA-ACE 7700 seriesDouble9-Speed
9-Speed
8-Speed
8-Speed
2200SORATriple
2200SORA
Double
ULTEGRA6500 series
1055500 series
TIAGRADoubleTriple
ST-6510ST-5510ST-4400ST-R600
FC-6500FC-5502
BB-UN73/53/26
BB-6500BB-5500
BB-7700
FC-4400
FC-4403
BB-7703BB-6500BB-5500
FD-6503FD-5504FD-4403
CN-7701CN-HG93CN-HG73CN-HG53
CN-7401CN-HG90CN-HG91CN-HG70CN-HG50
FD-3300FD-2200
FC-3300FC-2200
FD-3304FD-2203
*1
*1
*2BB-UN73BB-UN53BB-UN26
ST-R500ST-3300
FC-3303FC-2203
DURA-ACE 7700 series
TripleST-7703 FD-7703 FC-7703
ST-3304
*Note 3: Adapters are shipped with FC refer spec. handbook.*Notes 1 and 2: Axle length is different
FC-3304BB-ES71BB-ES51BB-ES30
*2BB-UN73BB-UN53BB-UN26
BB-ES71BB-ES51BB-ES30FC-3301
BB-UN73/53/26
FC-4401
FC-6503FC-5505
FC-4404 BB-ES71/51/30
BB-ES71/51/30
ST FD FC BB CN
1055600 series FD-5600
Double
DURA-ACE7800 seriesULTEGRA
6600 series
10-Speed
ST-7801ST-6600
FD-7800FD-6600
CN-7801CN-6600CN-5600
FC-7800FC-6600FC-5600FC-R700
SM-FC7800
Triple
DURA-ACE7803 seriesULTEGRA 6603 series
1055600 series
10-Speed
ST-7803ST-6603ST-5600ST-R700
FD-7803FD-6603
FD-5603
FC-7803FC-660352-39-30T
50-39-30TFC-5603
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
*3
*3
SM-FC7800
MC
ST-5600ST-R700
*3*3*3
ARCHIVE
144
Co
mb
inatio
n &
Interch
ang
eability
Drivetrain Interchangeability
Front derailleur and Crankset
The allowable combinations of front derailleurs and rear derailleurs depend on the difference in the number of teeth of the gears and the shape of the front derailleur plate.
Capacity
Top gearteeth number
Top-Middlemin. teeth difference
FC (top gear) - (low gear) =< FD (top and low capacity)
NOTE: When using the front derailleur designed for a 7-speed system on an 8-speed system, the front derailleur plate may interfere with the chain even if its installed correctly.
Front derailleur specifications (TRIPLE)
Crankset specifications
Front derailleurs and the number of teeth for corresponding cranksets are given in the chart below.
FC (top gear) - (middle gear) => FD (minimum difference in teeth number between top and middle)
If the conditions given below are not satisfied, then the desired shiftability may not be obtained.
FD-M760A-6FD-M760A-3FD-M761A-6FD-M761A-3FD-M580A-6FD-M580A-3FD-M581A-6FD-M581A-3
FD-MC21FD-M330FD-M330-E
FD-M960FD-M960-EFD-M961FD-M760A-EFD-M600FD-M601FD-M600-EFD-M580A-E
FD-M805FD-M806
FD-M510FD-M511FD-C510FD-C511
FD-C810FD-C505
44T 42T
12T 10T
22T
44-32-22
32-22
22T
44 /48T
12T
22T
48/44T
12T
22T
48T
12T
22T
SPCM
(46/34/24T)
SPCM
(46/34T)
20T
Mega-9 drivetrain SPCM (Triple)
FD-C600
SPCM (Double)FD-T301FD-C102FD-TZ31FD-C051
FD-T300FD-T300-EFD-C101-EFD-C050FD-TY10FD-CT92-EFD-TZ30FD-TY10
FD-TY30
42T
10T 8T
48T
20T
10T
48T
22T18T
Pro-Set alignment block
1 mm
3 mm
Gear teeth should�come within this�range
Pro-Set gauge
A
How to set position for FC with bigger top gear chain ring �in the same series.
1) set A2) Check if outer plate and bigger chainring have clearance3) Reposition height of FD in case problem at process (2)
FD-M761-3FD-M581-3-48T
Low gear
Top gear
Middle gear
FC-M510FC-M761FC-M581FC-M440FC-M470FC-M540FC-M530FC-M531FC-TS95
FC-M805-1FC-M800-1
FC-C530FC-M960 (44-32-24) *optionFC-M805-3FC-M800-3FC-M760FC-M600-3FC-M580FC-M540FC-M530FC-M531FC-M510FC-M470FC-M440FC-TS95
FC-C510 FC-C600
44T 34/38/42/46
32T
22T
48T
36T
26T
46T SPCM
46/34T34T
24T (-)
SPCM
46/34/24T
Bash Guard
32T
22T(-)
For Super Narrow chain For IG Chain For HG Chain
FC-M805-2FC-M800-2FC-M601-2
FC-M415FC-M416FC-M410FC-M411FC-M405FC-MC09FC-M341
FC-T300SFC-TY40FC-C050FC-TX70
FC-T303FC-TY33FC-C051FC-TX71
42T
32T 34T
42T
22T
FC-T410
32T
42T
22T
38/33T
38T
48T
28T24T
FC-C810FC-C505
NEWNEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEWNEW
NEW
NEW
MC
MC
MC
MC
MC
MC
MC
MC
MC
MC
FD-M410-6FD-M410-3FD-M410-E
Updated
ARCHIVE
145
Co
mb
inatio
n &
Interch
ang
eability
Drivetrain Interchangeability
Front derailleur and Chain line
FD-TY22GS
FD-TY18FD-TY30
47.5 /50 mm
47.5 /50 mm
(down pull only)
43.5 /45 mm
45/47.5 mm
(down pull only)
47.5 /50 mm(down pull only)
43.5 /45 mm(down pull only)
FD-TY10
FD-TZ30FD-TZ31
FD-TY22SS
FD-TY15GS
FD-TY15SS
The Shimano line-up for front derailleurs and the chainlines they support are given in the chart below.
Shimano front derailleurs, with the exception of some of the C-series and the Tourney class, support chain lines of 47.5 and 50 mm. The Tourney front derailleurs and corresponding chain lines are given in the chart below.
47.5 mm (shell width 68 mm), 50 mm (shell width 73 mm)
50 mm
57.5 mm (shell width of 83 mm)
50 mm
47.5 /50 mm
52.5 mm (shell width of 68 mm)
50 mm (shell width of 68 mm)
50 mm
the chainstay angle should �be between 66 and 69
For the E-type (BB mounting front derailleur): 47.5 mm (shell width of 68 mm) 50 mm (shell width of 73 mm)
When using the FD-MC18SE with a seat tube of diameter 34.9 mm (L) the chainstay angle should be between 66 and 69
XTR
DEORE XT
DEORE LX
DEORE
Non-Series
ACERA
NEXAVE
SAINT
For the E-type (BB mounting front derailleur):47.5 mm (shell width of 68 mm)50 mm (shell width of 73 mm)
47.5 /50 mm
FD-M960 FD-M960-E
FD-M961
FD-M805, FD-M806
FD-M760A-6 /M760A-3FD-M761A-6 /M761A-3FD-M760A-E
FD-M510, FD-M511
HONE FD-M600, FD-M600-EFD-M601
DEORE
ALIVIO
FD-M330
FD-M330-E
FD-C600
FD-C810, FD-C505
FD-C510
FD-T300, FD-T301
FD-MC21
With seat tube of diameter 34.9 mm (L), the chainstay angle should be between 66 and 69
73 mm shell width /66 and 69
C-series
TOURNEY 30
TOURNEY 22
TOURNEY 15
TOURNEY 10
TZ
For the E-type (BB mounting front derailleur): 47.5 mm (shell width of 68 mm)50 mm (shell width of 73 mm)
For the E-type (BB mounting front derailleur):47.5 mm (shell width of 68 mm)50 mm (shell width of 73 mm)
FD-C101-EFD-C102FD-C050
FD-C102
Front derailleur and chain line (MTB)
Front derailleur and chain line (Tourney)
FD-M580A-6 /M580A-3FD-M581A-6 /M581A-3FD-M580A-E
MC
MC
MC
MC
MC
MC
FD-M530-6 /M530-3FD-M531-6 /M531-3
FD-M410-6 /M410-3FD-M410-E
NEW
NEW
NEW
NEW
Ø 28.6 (S) Ø 31.8 (M) Ø 34.9 (L)
Ø 28.6 (S) Ø 31.8 (M) Ø 34.9 (L)ARCHIVE
146
Co
mb
inatio
n &
Interch
ang
eability
Drivetrain Interchangeability
Crankset, Bottom bracket, and Chain line
X: Yes
SeriesBottom Bracket
Spline Square ChaincaseXTR
HONE
FC-M960 X includeFC-M805-1FC-M805-2 includeFC-M805-3FC-M800-1
X
FC-M800-2FC-M800-3
X include
FC-M760 X includeFC-M761 X include
Deore LX FC-M580 X
FC-M510-O
FC-M600
X BB-ES51(-E) 113 118 -FC-M510-KO X X BB-ES51-K - 121
FC-M470(44T) X
FC-M440-O X - -FC-M440 X BB-UN26(-E) MM110 LL113 - -FC-C810 X X***
**** **** **** ****
X***
X***
X***
- 130 - -FC-C505 X X*** - 130 - -FC-C600 X X - - 117.5 -FC-C530 X X
X X***
X***
X***
X***X***X***
-FC-T410 X X -
--
123SP
LL113
LL113LL123
LL123
LL123LL123
LL123
--
FC-T300-S X X - -FC-T303 X
XXXX
X - -FC-M415FC-M416FC-M410FC-M411
Acera FC-M340FC-M341FC-M405FC-MC09
X
XXX
X -
Non-Series
FC-TY40 X - -Tourney
FC-TX70/TX71 X X - - D-NL(122.5)
- -- -- -
- -- -- -
-
--
--
---
-
Type of CrankCrankset
Deore
Model NO.
Chainline & Axle mark
47.5mm 50.0mm 52.5mm 47.5+tmmModel NO.
117.5
NEXAVE
YL117 ZL122BB-UN26(-E)
BB-UN26BB-UN26(-K)
BB-UN26BB-UN26(-K)
BB-UN26(-K)
BB-UN26-KBB-TS30/UN26-K
BB-UN26-K
BB-UN26
BB-UN26
SAINT
Deore XT
Alivio
MM110 LL113
YL117 ZL122
BB-ES51/30(-E) 118113
BB-UN26(-K)
FC-M540 X BB-ES51(-E) 113 118
X
FC-M581
FC-M601-2
X include
X include
Comfort bike and MTB Components
In order to use SIS to its full extent, the required correct chain line, along with the crankset and bottom bracket required to obtain that, are given in the chart below.
without chaincase stayBB-UN25 bottom brackets parts for FC-C510 includes 1.8 mm and 0.7 mm thickness spacers.In case of without chain case, use both spacers between hanger and right hand BB adaptor. In case of with chain case, use 0.7 mm thickness spacer only. Put chain case stay with 0.7 mm thickness spacer between hanger and right hand BB adaptor.Chain case stay thickness should be 1.5 mm to 2.1 mm.YL117: Chainline 44+t D-NL: Chianline 47+t117.5: Chianline 46+t D-EL: Chianline 49.5+t
FC-C510**
***
*******
BB-UN26(-E)/(-K)
BB-UN26(-E)/(-K)
MM110
D-NL(122.5)
121121 126
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
FC-M540-K X X BB-ES51-K 121121 126
XFC-M460 X -BB-UN26(-K) 117.5 117.5FC-M440 (48T) BB-UN26(-K) 117.5 117.5LL123 -
LL123XX
FC-M470(48T) BB-ES51/30(-K)BB-ES51/30(-K)
X X 121121 126
----
include
Chainline: 50 mm
Chainline: 50 mm
Chainline: 50 mm
Chainline: 57.5 mm
FC-M530 X –– 113FC-M531 BB-ES51/30-AK
BB-ES51/30X – 121
-
---
Updated
Updated
Update
d
Update
d
Update
d
Updated
Updated
ARCHIVE
147
Co
mb
inatio
n &
Interch
ang
eability
Drivetrain Interchangeability
Octalink Bottom Bracket
X: Yes
The dimensions of the eight serrations on the BB are shown below.The dimensions for BB-ES71/51/30 are different from those for BB-M952/7700/7703/7710/6500/5500.Be aware that these models are not compatible.
BB-ES71BB-ES51BB-ES30BB-C900
BB-M952BB-7700BB-7703BB-7710BB-6500BB-5500
9
2.8
2.2
5
Capreo series componentsThe combinations of the front chainwheel and the bottom bracket to obtain proper chain line, which are necessary for the SIS (= Shimano Indexed System) to function well, are presented in the following chart.
* This specification can be used without the chain case as 52.5 mm chain line. In that case, a space is to be left between the shell and the adapter on the left side of the BB, but there is no problem in actual use.
Series
CapreoFC-F700
BB-UN40
BB-UN40-K
BB-UN26
BB-UN26-K
MM110
-
MM110
-
LL113
-
LL113
-
-
-
YL117
-
-
*117.5
-
*117.5
X X
FC BB Chain Line & Axle mark
Model No.Spline Square Chaincase
type of CrankModel No. 46.0
mm48.5mm
50.0mm
52.5+tmm
ARCHIVE
148
Co
mb
inatio
n &
Interch
ang
eability
Drivetrain Interchangeability
Chain, Chainring and Cassette sprocket
The allowable combinations for the Shimano chain (CN), chainrings (FC), and cassette sprockets (CS) are given in the chart below. These chains are available in order to match the type of drivetrain. Select the combination you desire after checking the chart below.
Mega-9
Cassettesprocket
CassettesprocketCrankset Crankset Cassette
sprocket Crankset Cassettesprocket Crankset
IGLG HG
FC/CS
Chain
CS-M960
CS-M760
CS-M580
CS-HG70-9
CS-HG50-9
CS-LG50 FC-C810
FC-C505
FC-C503
FC-C530
FC-C510
CN-7701CN-HG93CN-HG73CN-HG53
FC-M960FC-M805FC-M800FC-M760FC-M761FC-M600FC-M601FC-M581FC-M580FC-M572FC-M540FC-M530FC-M531FC-M470FC-M460FC-M445FC-M440FC-C600
CS-IG60 FC-T410 CS-HG40-8I
CS-HG60-I
CS-HG50-8I
CS-HG50-I
CS-HG30-I
CS-HG30-8I
FC-M415FC-M416FC-M410FC-M411FC-M341FC-M405FC-MC09FC-T411FC-T300-SFC-T303FC-TY40FC-TX70FC-TX71FC-TS38FC-TS31
Mega-9Super
Narrow chain
CN-IG51CN-IG31
IG Chain
HG Chain
CN-7401CN-HG50
Good Good Good Good
Good Good
Good Good
Not good
Not good
Not good
Not good Not good Not good
Not good Not goodNot good
Not good Not good Not good
Good
(Note 1)
Not goodpoor
performance
Not good
poorperformance
Not good
Will notwork
Note 1: When used together with the HG cassette sprocket CS-M737/HG70-8, the adjustable range is very narrow and requires great care.
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEWNEW
ARCHIVE
149
Co
mb
inatio
n &
Interch
ang
eability
Drivetrain Interchangeability
Spoke protector
Select the spoke protector after checking the chart below.It is decided by hole number of hub and number of the gear teeth.
Choose an appropriate spoke protector in the chart below.
FH-F700
24H
32H
36H
CP-FH35/FH31
CP-FH35
CP-FH31
FH Spoke Protector
Spoke protector for Capreo
***
Protector 21T 25T 26T 28T 30T 32T 34THub
CP-FH40for 28H hub
CP-FH35
CP-FH02
CP-FH75*CP-FH56*
CP-FH76**
CP-FH50
for 32H hub
for 36H hub
for 10 speed32H hub
for ShimanoWheel
for (6-bolts) Shimano
Disc Brake Hubfor IF-C530
INTEGO36H Freehub
* Using with light alloy sprocket carrier ** Using with standard cassette sprocket***
Note: A spoke protector is included with the cassette sprocket CS-LG50.
Compatible cassette sprocketCP-WH11: for CS-M750/M760/M960 (11-32T)CP-WH10: for CS-M953/M960 (12-34T)
CS-M750/M760 (12-34T /11-34T)CS-HG70-9 (11-32T /11-34T)CS-HG50-9 (11-32T)
for WH-7701 /R540
for WH-M965/M765/M565/M540/T565 /T560
5.4”
7.5”
5.4”
ø109
CP-FH05ø109
7.5”
5.4”
ø109
6.3”
CP-FH01
CP-WH71CP-WH10/11
for WH-R500
for WH-7801-carbon/7801-SL /7801 /7800 /R600 /R560 /R550CP-WH20-ACP-FH02/35
for FH-M755/M756/M525/M475
for FH-M755/M756/M525/M475CP-FH75*CP-FH76**
6.3”
CP-FH53
CP-FH76**
CP-IF53****
CP-IF52****
CP-FH75*
CP-IF53****
for IF-C530INTEGO
32H FreehubCP-IF52****
for 10 speed36H hub CP-FH06ø109
CP-FH31CP-FH30-8For 8 speed
(24T – 26T) (26T – 28T)
ARCHIVE
150
Co
mb
inatio
n &
Interch
ang
eability
Drivetrain Interchangeability
Spacer
FH-7700
FH-7800WH-7800
FH-66008/9 speed
FH/WH
FH-7800
Deep serration
Deep serration Shallow serration
Shallow serration
No!
WH-R550
X
Cassette sprocket compatibility will differ depending on the freehub (FH) and wheel (WH) used.
Be aware that freehub (FH) and wheel (WH) compatibility with CS-6600 might differ depending on the tooth combination.
*The tooth combination for CS-6600 JUNIOR type cannot be installed on FH/WH-7800.
A 1 mm spacer is required when combining CS-7800 and CS-6600 (except junior types) with a 8/9 speed freehub (FH) and FH-6600.
CS-7800 (all)CS-6600 (Standard 11T and 12T top gear combinations)CS-5600 (all)
8/9 speedfreehuband FH-6600
FH-7800WH-7800
CS-7800 and CS-6600 (all)
CS-6600 (13, 14, 15, 16 top gear combinations for JUNIOR type)
*The serration depth is the same as for the 8 and 9 speed cassette sprocket.
CS-7800 and CS-6600 (standard 11 tooth and 12-tooth top gear tooth combination)
*The tooth combination for JUNIOR type cannot be installed on FH/WH-7800.
WH-R500
X
WH-R540
—
WH-7701
X
WH-R535
—
WH-6500
—
WH-7700
—
FH-6600/8/9 speedfreehub
X
WH-7801-CarbonWH-7801-SLWH-7801FH-7800WH-7800
X
Tooth
11 – 21
Model No.Type
CS-7800XXXX———XX12 – 21
CS-7800CS-6600
XXXX—XXXX11 – 23
CS-6600
XXXX—XXXX12 – 25
XXXX—XXXX12 – 27
XXXX—XXX—13 – 25
XXXX———XX11 – 23
XXXX———XX12 – 23
XXXX—XXXX12 – 25
XXXX—XXXX12 – 27
— =X =
XXXX—XXX—14 – 25
XXXX—XXX—15 – 25
XXXX—
—
—
—
—XXX—16 – 27
CS-5600
Cassette sprocket, Rear freehub and Wheel (10-speed)
NEW
10 sp
eed
stan
dard
10 sp
eed
JUN
IOR
NEW
NEW NEW
WH-R560
X
WH-R600
X
XX
XX
XX
XX
X
XX
XX
XX
XX
X
X
X
Note: CS-6600 (14 – 25, 15 – 25, 16 – 27) cannot work with tripple front drive system. If combine, bad shifting performance could be happend.
NEW
NEW
NEW
ARCHIVE
151
Co
mb
inatio
n &
Interch
ang
eability
Disc b
rake
Disc brakeCombination Chart (Hydraulic Disc)
Shimano Hydraulic Disc Brake combination chart
Rotor Specification
In order to realize the best performance, we recommend that the following combination be used.
Series Caliper Mount type Brake Lever Roter PAD (option) Hose Remarks
BR-M965 Internationalstandard
BR-M966 Post mount
SAINT BR-M800 *1
SM-RT80SM-RT80S
SM-RT75-DH
M06 Metal(M07-S resin) SM-BH63
*1 Front: Boxxer, Post (Manitou)& International standardavailable.Rear: International standard
Deore XT BR-M765 *2 ST-M766
BL-M765
SM-RT77SM-RT75S
M07-S resin(M06 Metal)
(M06 Metal)
SM-BH63
BR-M525 *2 BL-M525ST-M535 M08 Resin SM-BH59
*2 Front mount: Internationalstandard / Post mountRear mount: Internationalstandard
*2 Front mount: Internationalstandard / Post mountRear mount: Internationalstandard
NEXAVE BR-C901 Internationalstandard BL-C901 C01 Metal SM-BH60/61
XTR ST-M966 SM-RT96SM-RT75S
M07 Resin(M06 Metal) SM-BH96
Deore
SM-RT61
Front Only
Deore LX BR-M585
BR-M601*2
ST-M585BL-M585
ST-M600BL-M525
SM-BH59*2 Front mount: International
standard / Post mountRear mount: Internationalstandard
Series Model No. Outside Diameter CENTERLOCK System PCD 44 mm
XTR SM-RT96 160 mm X -
SM-RT80 203 mm -
SM-RT80S 160 mm -
SM-RT75-DH 203 mm -
-
-
X
SM-RT77 160 mm X -
SM-RT77L 203 mm X -
SM-RT75S
SM-RT75M
160 mm
170 mm
-
-
X
X
X
X: Yes
SM-RT61 160 mm -
Oversized CENTERLOCK System
-
-
X
X
-
-
-
-
-
Deore LX
Deore XT
Deore /NEXAVE
SAINT
SM-RT62 160 mm X --
SM-RT62M 180 mm X --
SM-RT63 160 mm X --
HONEDeore
HONE
M07-S resin(M06 Metal)
M06 Metal(M07-S resin)
BL-M800ST-M800
BR-M535 *2 ST-M535BL-M535
SM-BH59*2 Front mount: International
standard / Post mountRear mount: Internationalstandard
NEW
NEW
NEWNEW M07-S Resin
SM-RT62L 203 mm X --
SM-RT63SM-RT62-MSM-RT62-L
MC
SM-RT63SM-RT62-MSM-RT62-L
MC
MC
MC
MC ARCHIVE
152
Co
mb
inatio
n &
Interch
ang
eability
Disc b
rake
Combination Chart (Mechanical Disc)
Shimano Mechanical Disc Brake combination chart
Mechanical Disc brake and Brake lever interchangeability
In order to realize the best performance, we recommend that the following combination be used.
Series
Model NO.
BL type
w/SM-PM50BL-C900 /C600 type �or w/SM-PM40
4 finger2 finger4 finger w/modulator
Caliper Mount type Brake Lever Rotor PAD
Non-seriesV-brake BL�
(1.5-2.5 finger)
* FRONT MOUNT: International standard /Post mount * REAR MOUNT: International standard
BR-M495 * SM-RT52�For resin pad only
M08 ResinNEXAVE
BR-M465 *
GoodNot goodNot goodGoodBR-M495
GoodNot goodNot goodGoodBR-M465
Hose material & length
for Front for Rear
XTR SM-BH96 ST-M965/BR-M965,M966 Cutable
SAINTDeore XT
DeoreSM-BH63
ST-M766, ST-M800BL-M765, BL-M800BR-M765, BR-M800
Cutable
SM-BH61SM-BH60
500-1000(every 50mm)
1200-1700(every 50mm)
SM-BH59 Cutable
Deore /NEXAVE
Series Model No.
900, 1300, 1700 mm
900, 1300, 1700 mm
BL/BR-C901
Resin
900, 1300, 1700 mm
Compatiblebrake lever &
caliperMaterial
Hose length (mm)
Deore LXHONE SM-BH59
ST-M585/BR-M585BL-M585ST-M600/BR-M601BL-M525
ST-M535/BR-M535BL-M535BL /BR-M525
Cutable900, 1300, 1700 mm
NEW
NEW
MC
MC
ARCHIVE
153
Co
mb
inatio
n &
Interch
ang
eability
V-BRAK
E and Canti-brake
V-BRAKE and Canti-brakeInterchangeability between brake systems
Depending on the brake and brake lever combination to be used, the relationship between the input at the brake lever and the actual braking force output at the wheels is very easily affected.
Be very careful when combining a brake and brake lever. Incorrect combinations can cause accidents or insufficient braking forces due to improper cable strokes. Be sure to carefully consult the chart below and select the brake and the matching brake lever.
Brakes
Brake levers
No!No!
No!
No!
No!
V-BRAKE
Note:1
BR-M960BR-M760BR-M570BR-M510BR-MC18BR-M431
BR-T300BR-T300-S
BR-M421 with SM-PM40
ST-C505ST-C530ST-C503-ABL-T400ST-T400-SST-T300-SST-EF29 (4finger)SB-C055A (4finger)SB-8S20BL-IM60
ST-M960ST-M760ST-M580ST-M570ST-MC20ST-EF33ST-EF35ST-EF29SB-C055ASB-C055
BL-C600
V-Brake LeversWithpower
modulatormodel
Nexus/NEXAVE(Trekking bike lever)
With powermodulator model
Cantilever BrakeRoller Brake
Cantilever & �Roller Brake �
Levers
The “NO!” symbols indicate combinations that should not be used under any circumstances.No!
Note 1: This combination will not provide the sufficient amount of braking force.
BR-M430BR-M420BR-C600BR-M580BR-M530BR-M421
BL-M950BL-M739-SBL-MC18BL-M420BL-M950
BL-C800BL-IM65
NEW
NEW
NEWNEW
ARCHIVE
154
Co
mb
inatio
n &
Interch
ang
eability
Brake component interchangeability
ST-T400/BL-T400/ST-T300/ST-EF29/SB-C055A/SB-7S45/BL-IM45 brake levers are equipped with a switch to change between the V-brake with modulator mode (BR-T300 and BR-M420 with SM-PM40) and the cantilever or roller brake mode.
For V-brake (with power modulator) mode
For Canti/Roller-brake.
V-position
V
V
C R
V-brake with power modulator
Good
Notgood
Notgood
Roller brake/canti brake
V-brake without power modulator
VV
C R
C R
Notgood
Notgood
Roller brake /Canti brake
Good
Canti / roller (C R) brake-position
V-brake without power modulator
V-brake with power modulator
If the mode is not matched to the type of brake being used, this could result in inadequate or excessive braking power. Please proceed with caution when selecting the correct mode for the corresponding brake.
WARNING:
V-BRAK
E and Canti-brake
ARCHIVE
155
Co
mb
inatio
n &
Interch
ang
eability
ST-R220/R224/R223 brake levers are equipped with a switch to change between the V-brake with modulator mode and the caliper brake, canti brake or roller brake mode.
For V-brake (with power modulator) mode
For Caliper/Canti/Roller-brake.
V-position
V
V
C R
V-brake with power modulatorV-brake + SM-PM40
V-brake + SM-PM40
Good
Notgood
Notgood
Cariper brake / Roller brake / canti brake
V-brake without power modulator
VV
C R
C R
Notgood
Notgood
Cariper brake / Roller brake / canti brake
Good
Caliper /Canti / roller (C R) brake-position
V-brake without power modulator
V-brake with power modulator
If the mode is not matched to the type of brake being used, this could result in inadequate or excessive braking power. Please proceed with caution when selecting the correct mode for the corresponding brake.
WARNING:
V-BRAK
E and Canti-brake
ARCHIVE
156
Hub roller brakeInterchangeability between hub and roller brake
Hub roller brake and Front hub w/modulator
Hub roller brake and Hub Dynamo w/modulator
Hub roller brake and Front hub w/modulatorFor 20" to 24" bike ( for Children )
Hub roller brake and Hub Dynamo w/modulatorFor 20" to 24" bike ( for Children )
Model NO. Modulator Level type BR-IM75-F BR-IM70-F BR-IM50-F BR-IM41-F BR-C050-IM-F
HB-IM70 Hyper QR not good not good not good
HB-IM50 Normal QR not good
HB-IM45 Normal NUT
HB-IM40 Normal NUT
HB-C052-IM Hyper NUT not good not good
HB-IM20-E Hyper NUT not good not good
: Recommended combination: Usable
: Recommended combination: Usable
Model NO. Modulator Level type BR-IM75-F BR-IM70-F BR-IM50-F BR-IM41-F BR-C050-IM-F
HB-IM30 20-24inches NUT
HB-IM20-EC 20-24inches NUT
HB-C052C-IM 20-24inches NUT
good
Model NO. Modulator Level type BR-IM75-F BR-IM70-F BR-IM50-F BR-IM41-F BR-C050-IM-F
QR not good not good not good
NUT not good not good
DH-2R40 Hyper NUT not good not good
QR not good not good
NUT
HB-NX60 Normal NUT
HB-C051-DR Hyper NUT not good not good
HB-C050-DR Hyper NUT not good not good
DH-3R40 Hyper
HB-NX50 Normal
Model NO. Modulator Level type BR-IM75-F BR-IM70-F BR-IM50-F BR-IM41-F BR-C050-IM-F
HB-C051-DRC 20-24inches NUT
HB-C050-DRC 20-24inches NUTgood
Co
mb
inatio
n &
Interch
ang
eability
ARCHIVE
157
Co
mb
inatio
n &
Interch
ang
eability
Brake sh
oe
Brake shoeBrake shoe (for V-brake and Canti-brake)
Brake/Shoe Iine-up
Shoe characteristics
M70R2M70R2(Severe
Conditionshoe)
Ceramic M70T3 M70T4M70CT4(Severe
Conditionshoe)
M70W M65T3 M65T4 S70CS70C
(SevereCondition
shoe)
S70T S65T
BR-M960 Standard - Option - - - - - - - - - -BR-M760 Option - Option Low noise Option - - - - Standard - - -
BR-M530 - - - Option Option - - - - - - -Standard
BR-M431 Option - - - - - - - - Standard - - -BR-M421 - - - - - - - Option Option - - - Standard
BR-T300 - - - Option Option - - - - - - Standard -BR-R550 - Option - - - Option - - - - Standard - -
BR-M580 - - - Option Option - - - - Standard - - -
Cartridgeshoe M-system Length Threaded
shoe post Brake shoe characteristics
M70R2 X X 70 mm XA race shoe that performs well in dry and wet conditions, and is also highly resistant to wear. may give off noise.
M70R2(Severe Condition shoe) X X 70 mm X +1mm thicker shoe with M70R2
Ceramic X - 70 mm X Specific shoe for ceramic rims.
M70T3 - X 70 mm X
M65T3 - X 65 mm X
M70T4 - X 70 mm X
M65T4 - X 65 mm X
M70CT4(Severe Condition shoe) X X 70 mm X Cartridge shoe with M70T4
S70C X - 70 mm X
S70T - - 70 mm X
S65T - - 65 mm X
S70C(Severe Condition shoe) X - 70 mm X
X: Yes
+1mm thicker shoe with S70C
Performs especially well in wet conditions andmay pass DIN standards. Gives off less noise, butthe pad is heavier, faster rim wear, and tends tofade.
Only for side wall machined rims. Performs especially well in wet conditions and may passDIN standard. Tend to be low noise, low rim wearand fade.
Performs well in dry conditions and tends to be low noise. Wears in muddy conditions.
NEW
NEW
NEW
ARCHIVE
158
Co
mb
inatio
n &
Interch
ang
eability
Brake sh
oe
Brake shoe (for road bikes)
< Brake/Shoe Iine-up >
Brake shoe (Capreo)
< Shoe characteristics >
< Shoe characteristics >
R55C2 R55C +1 R55C R55C forCarbon rim
R55C forCeramic rim M50T R50T
BR-7800 Standard Option - Option Option - -
ULTEGRA
105 BR-5600 - - Option Option - -
non-series BR-R600 - Standard - Option Option - -
TIAGRA BR-4400 - - - - - Option Standard
SORA BR-3300 - - - - - Option Standard
non-series BR-A550-57 - - - - - Option Standard
DURA-ACE
BR-6600 Standard
Standard
- - Option Option - -
Cartridgeshoe M-system Length Brake shoe characteristics
R55C2 - 55 mmPerforms well in dry conditions and tends to below noise. Highly resistant to wear in rainy conditions.
R55C +1 - 55 mm * 1 mm thicker shoe with R55C
R55C - 55 mmPerforms well in dry conditions and tends to be low noise. Wear in rainy conditions.
R55Cfor Carbon rim - 55 mm For Carbon rim
R55Cfor Ceramic rim 55 mm
X
X
X
X
X For Ceramic rim only
M50T - 50 mm
X
XPerforms well in wet conditions. But faster rim wear.
R50T - - 50 mmPerforms well in dry conditions and tends to be low noise. Wears in rainy conditions.
Shoe Cartridgeshoe
M-system
R55C(for F700) X X
Length
55 mm
ThreadShoe Post
X
X: Yes
X: Yes
Brake Shoe Charectristic
Performs well in wet conditionsand may pass DIN standards. Tends to be low noise. But faster rim wear.
NEW
ARCHIVE
159
Co
mb
inatio
n &
Interch
ang
eability
Brake p
ad
Brake padBrake pad line-up (for disc brake)
M01/M03/M06: Longer pad-life, good for anti-fade, good constancy either dry /wet. May cause noise while braking.M02/M04/M05/M07/M07-S: Same level performance as metal pad. Shorter pad-life than metal.C01: Easy, controllable metal pad, good for trekking use.
M01
Sintered Metal
M02
Resin
M03
Sintered Metal
M04
Resin
M07-S
Resin
option
Standard
option
Standard
Standard
M05
Resin
M06
Sintered Metal
option
Standard
option
Standard
option
option
M07
Resin
Standard
M08
Resin
Standard
Standard
Standard
C01
Sintered Metal
Standard
Model NO.
BR-M965BR-M966BR-M800
BR-M765
BR-M601
BR-M585
BR-M535
BR-M525
BR-M495
BR-M465
BR-C901
type
Hydraulic
Hydraulic
Hydraulic
Hydraulic
Hydraulic
Hydraulic
Hydraulic
Mechanical
Mechanical
Hydraulic
NEW
ARCHIVE
160
Co
mb
inatio
n &
Interch
ang
eability
Disc brake rotorDisc brake caliper/Rotor combination
* P: Post mount type I: International standard type
: Shorter pad life than .Need mount adapter according to kind of frame mount.Weight of rotor include bolts and plate or lock ring.SM-RT52; Compatible with resin pad caliper specification only.If use with caliper with metal pads, rotor will be easily damaged.
SM-RT96SM-RT80SSM-RT80SM-RT77SM-RT77LSM-RT75SM-RT75MSM-RT75DHSM-RT63SM-RT62SM-RT62MSM-RT62LSM-RT61SM-RT52
160 mm160 mm203 mm160 mm203 mm160 mm170 mm203 mm160 mm160 mm180 mm203 mm160 mm160 mm
CaliperRotor BR-M966 BR-M965 BR-M800 BR-M765 BR-M585 BR-M535 BR-M525 BR-C901140.9 g146.4 g210.5 g148.7 g212.8 g138.9 g147.6 g209.4 g165.0 g165.0 g188.0 g233.0 g161.7 g180.0 g
— — — — — — —
—
P / I* I PP P P P I & P
—
P
MC
NEW
160 mm160 mm203 mm160 mm203 mm160 mm170 mm203 mm160 mm160 mm180 mm203 mm160 mm160 mm
CaliperRotor BR-M495 BR-M465Center lockCenter lock (large)Center lock (large) / Need mount adapterCenter lockCenter lock / Need mount adapter
For post-mount / Need mount adapterNeed mount adapterCenter lockCenter lockCenter lock / Need mount adapterCenter lock / Need mount adapter
Center lock / Only resin pad
— —
P PP / I*
SM-RT96SM-RT80SSM-RT80SM-RT77SM-RT77LSM-RT75SM-RT75MSM-RT75DHSM-RT63SM-RT62SM-RT62MSM-RT62LSM-RT61SM-RT52
MC
ARCHIVE
161
Co
mb
inatio
n &
Interch
ang
eability
Disc brake m
ount adapter
Disc brake mount adapterDisc brake mount adapter application
How to read Model NO.
SM - MA - F 203 S / P
Mount adapter / Model NO.
SM-MA-F203S/S
SM-MA-F203S/P
SM-MA-F203S/B
SM-MA-F203S/Z
SM-MA-F203P/S
SM-MA-F203P/P
SM-MA-F203P/B
SM-MA-F203P/Z
SM-MA-F180S/S
SM-MA-F180S/P
SM-MA-F180P/S
SM-MA-F180P/P
SM-MA-F170S/P
SM-MA-F160P/S
SM-MA-F160P/Z
SM-MA-R203S/S
SM-MA-R203P/S
SM-MA-R180S/S
SM-MA-R180P/S
SM-MA-R160P/S
Mount adapter
Rotor size
Caliper mount-type S = Int-A-standard P = Post
Suspension /Frame-type International A-standard = S Post = P Boxxer = B Marzocchi 20 mm Axle = Z (QR 20 Plus-DH INTL STD)
Front = FRear = R
Small parts
ARCHIVE
162
Co
mb
inatio
n &
Interch
ang
eability
Disc brake m
ount adapter
Model Rotor diameter A-standard
SM-MA-R203S/S
Direct attach
SM-MA-R203P/S
SM-MA-R160P/S
203 SM-MA-R203P/S
160 SM-MA-R160P/S
203 SM-MA-R203P/S
160 SM-MA-R160P/S
203
160 SM-MA-R160P/S
BR-M965
BR-M966
BR-M800
BR-M765BR-M601BR-M585BR-M535
BR-M525
< For rear >
SM-MA-R203P/SNEW
SM-MA-R180S/S
SM-MA-R180P/S
180 SM-MA-R180P/S
180 SM-MA-R180P/S
180 SM-MA-R180P/S
203
180
160
203
180
160
Shimano hydraulic disc brake mount adapter application table
< For front >
A-standard MARZOCCHI 20 mm Axle(QR 20 Plus-DH INTL STD) BOXXER-type POST-type
203 SM-MA-F203S/S SM-MA-F203S/Z SM-MA-F203S/B SM-MA-F203S/P
SM-MA-F180S/P180 SM-MA-F180S/S
SM-MA-F203P/S SM-MA-F203P/Z SM-MA-F203P/B SM-MA-F203P/P
SM-MA-F160P/S SM-MA-F160P/Z Direct attach
SM-MA-F203P/S SM-MA-F203P/Z SM-MA-F203P/B SM-MA-F203P/P
SM-MA-F160P/S SM-MA-F160P/Z Direct attach
SM-MA-F203P/S SM-MA-F203P/Z SM-MA-F203P/B SM-MA-F203P/P
SM-MA-F160P/S SM-MA-F160P/Z Direct attach
Model Rotordiameter
Mount-type
BR-M965
BR-M966
BR-M800
BR-M765BR-M601BR-M585BR-M535NEW
160 Direct attach
SM-MA-F180P/S SM-MA-F180P/P
SM-MA-F180P/S SM-MA-F180P/P
SM-MA-F180P/S SM-MA-F180P/P
203
180
160
203
180
160
203
180
160
203 SM-MA-F203P/S SM-MA-F203P/Z SM-MA-F203P/B SM-MA-F203P/P
160 SM-MA-F160P/S SM-MA-F160P/Z Direct attach
BR-M525 180 SM-MA-F180P/S SM-MA-F180P/P
ARCHIVE
163
Co
mb
inatio
n &
Interch
ang
eability
Disc brake m
ount adapter
Shimano mechanical disc brake mount adapter application table
Model Rotor diameter A-standard
M475 Adapter ( R )
BR-M465BR-M495
< For rear >
A-standard BOXXER-type POST-typeRotor
diameter
Mount-typeModel
BR-M495BR-M465
< For front >
MARZOCCHI 20 mm Axle(QR 20 Plus-DH INTL STD)
203
160
SM-MA-R203P/S
180 SM-MA-R180P/S
203 SM-MA-F203P/S SM-MA-F203P/Z SM-MA-F203P/B SM-MA-F203P/P
160 SM-MA-F160P/S SM-MA-F160P/Z Direct attach
180 SM-MA-F180P/S SM-MA-F180P/P Updated
Updated
ARCHIVE
164
Co
mb
inatio
n &
Interch
ang
eability
Disc brake m
ount adapter
ARCHIVE