fluxus® g601 technical specification - u-keisoku.co.jp“‡はflexim ... fluxus® f601 technical...
TRANSCRIPT
TSFLUXUS_G601V2-1CN-1010 -1-
FLUXUSⓇ はFLEXIM会社のブランドで、保護されています。仕様は事前の予告なしに変更する場合がありますのでご了承願います。
技術仕様
FLUXUS® G601
様々な種類の配管に対応した簡単設定クランプオンタイプ
ポータブル式超音波流量計
特長
• クランプオンタイプ、高精度両方向の流量測定
• 幅広い測定レンジ、高精度、高いゼロ点安定性、
高温度対応
• 2 チャンネル仕様、多入出力、データロガー、
シリアルインターフェース
• 本体保護等級 IP65
• リチウムイオンバッテリーにて最大約 14 時間
連続運転
• トランスデューサ(変換器)自動認識にて 5 分
以内の簡単設定
• 配管内径 7 ~ 1600mm
• 測定温度 - 40℃ ~ + 200℃
• 丈夫なキャリングケース保護等級:IP67
• 配管厚さ測定用プローブあり(オプション)
• 過酷な条件でも、クイックフィックスにて
トランスデューサ(変換器)を簡単設置
• 液体測定も可能
アプリケーション
- 天然ガス配管と天然ガス貯蔵設備
- 合成ガスと注入ガスの測定
- ガス供給設備
- 流量計のモニタリングとメンテナンス
ポータブル式超音波気体流量計
FLUXUS G601
固定用具による簡単設定
製品と専用ケース
Technical SpecificationFLUXUS® G601
TSFLUXUS_G601V1-5-1EN_Leu, 2014-02-25 1
FLUXUS supported by handle
Measurement with transducers mounted by the portable Variofix VP
Measurement equipment in transport case
G601
Portable Ultrasonic Flow Measurement of Gas
Portable instrument for non-intrusive, quick ultrasonic flow measurement with clamp-on technology for all types of piping
Features
• Precise bi-directional and highly dynamic flow measure-ment with the non-intrusive clamp-on technology
• High precision at fast and slow flow rates, high tem-perature and zero point stability
• Portable, easy-to-use flow transmitter with 2 flow chan-nels, multiple inputs/outputs, an integrated data logger with a serial interface
• Water and dust-tight (IP65); resistant against oil, many liquids and dirt
• Li-Ion battery provides up to 14 hours of measurement operation
• Automatic loading of calibration data and transducer detection for a fast and easy set-up (less than 5 min), providing precise and long-term stable results
• User-friendly design• Transducers available for a wide range of inner pipe
diameters ( ) and fluid temperatures ( )
• Probe for wall thickness measurement available• Robust, water-tight (IP67) transport case with compre-
hensive accessories• QuickFix for fast mounting of the flow transmitter in diffi-
cult conditions
Applications
Designed for industrial use in harsh environments, in gas processing and natural gas extraction, chemical industry and in the petroleum industry. Practical applications:• Measurement on natural gas pipelines and in natural
gas storage installations• Measurement of synthesized gas and injection gas• Measurement for the gas supply industry• Supervision of permanently installed meters, service
and maintenance
7...1600 mm-40...+200 °C
TSFLUXUS_G601V2-1CN-1010 -2-
FLUXUSⓇ はFLEXIM会社のブランドで、保護されています。仕様は事前の予告なしに変更する場合がありますのでご了承願います。
FLUXUS®G601技術仕様
FLUXUS G601タイプ ポータブル式
測定
測定原理 伝搬時間差方式
流速 0.01 ~ 35m/s(配管径による)
繰り返し性 0.15% 読み値(アプリケーションによる)
精度
-体積流量 ±1% 読み値(アプリケーションによる)±0.5% 読み値(フィールドキャリブレーション可能の場合)
流体 音波伝搬気体
温度補正 ANSI / ASME CMF - 5M - 1985の推奨に対応
トランスミッタ(変換器)
電源100 ~ 240V / 50 ~ 60Hz(変換器電源)10.5 ~ 15VDC(変換器のソケット部)
バッテリーリチウムバッテリー、7.2V / 4.5Ah運転時間(入出力とバックライトなし)>14 時間
電力消費 < 6 W測定個所 2 (トランスデューサ2セット設定可能 )演算移動平均 0 ~ 100s 設定可
測定周期 100 ~ 1000Hz応答時間 1s(1チャンネル)、70ms(オプション)
材質 PA、TPE、AUTOTEX、ステンレス
保護等級(EN60529による) IP65重量 1.9 kg取り付け クイックフィックス取付用冶具
使用条件温度 -10 ~ +60℃表示部 2x16 文字、ドットマトリックス、バックライト付き
表示言語 英語、ドイツ語、フランス語、オランダ語、スペイン語
計測仕様
測定量 実際体積流量、標準体積流量、質量流量、流速
積算値 体積、質量
演算計算 平均値、差値、総和
診断機能 音速、信号幅、SNR、SCNR、アンプ標準偏差、伝搬時間
データ記録
記録できるデータ 全ての測定量、積算値及び診断量
容量 >100000点定量
テクニカルデータ
TSFLUXUS_G601V2-1CN-1010 -3-
FLUXUSⓇ はFLEXIM会社のブランドで、保護されています。仕様は事前の予告なしに変更する場合がありますのでご了承願います。
FLUXUS® G601 技術仕様
FLUXUS G601通信
インターフェイス RS232 / USBソフトウェア
ソフトウェアシステム(あらゆるWindowsTMバージョン)
FluxuData:測定値 / 記録ダウンロード、グラフ表示、他のフォーマットへ変換(例えば、ExcelTM)FluxKoef:媒質データの作成
ケーブル RS 232コネクター RS 232 - USB専用ケース
サイズ 500×400×190mm出力
出力側は本体とのガルバニック絶縁
出力数
アクセサリー 出力アダプター(出力数 4 以上の場合)
電流出力
出力レンジ精度アクティブ・出力パッシブ出力
0 / 4 ~ 20mA0.1% 読み値±15μARext < 200ΩUext = 4 ~ 16V,RextによりRext < 500Ω
周波数出力
出力レンジオープンコレクタ
0 ~ 5kHz24V / 4 mA
バイナリ出力
オプトリレー 26V / 4mA アラーム出力として 上限下限値、流れ方向変化、エラー
パルス出力として -パルス値 -パルス幅
0.01 ~ 1000(設定積算単位)1 ~ 1000ms
イントプット
出力側は本体とのガルバニック絶縁
出力数 最大 4アクセサリー イントプットアダプター(インプット出力数 > 2の場合)
温度インプット
タイプ連結出力レンジ分解能精度
Pt100 / Pt10004 導線式-150 ~ +560℃0.01K±0.01% 読み値 ±0.03K
電流インプット
出力レンジ精度パッシブ出力
パッシブ:-20 ~ +20mA0.1% 読み値 ±10μARi = 50Ω、Pi < 0.3W
電圧インプット
レンジ精度内部抵抗
0 ~ 1V 0.1% 読み値 ±1mVRi=1MΩ
TSFLUXUS_G601V2-1CN-1010 -4-
FLUXUSⓇ はFLEXIM会社のブランドで、保護されています。仕様は事前の予告なしに変更する場合がありますのでご了承願います。
FLUXUS® G601技術仕様
6 9.7.2008 TSFLUXUS_F601V1-1EN
FLUXUS® F601 Technical Specification
Dimensions (in mm)
FLUXUS F601
Standard Scopes of Supply F601 Standard F601 Energy F601 Multifunctional
422 tuptuo tnerruc evissap222 tuptuo yranib22- tupni erutarepmet2-- tupni tnerruc evissap
application all flow measurements on liquids including energy calculator for BTU and heat measurements
for sophisticated measuring tasks, e.g. modeling of pump curves
accessories - transport case- power supply, power cable- battery- QuickFix pipe mounting fixture for flowmeter- serial data kit- fastening shoes and chains
( transducer frequency M, Q)- measuring tape- user manual, Quick Start Guide
- transport case- power supply, power cable- battery- QuickFix pipe mounting fixture for flowmeter- serial data kit- fastening shoes and chains
( transducer frequency M, Q)- measuring tape- user manual, Quick Start Guide
- transport case- power supply, power cable- battery- output adapter- input adapter- QuickFix pipe mounting fixture for flowmeter- serial data kit- fastening shoes and chains
( transducer frequency M, Q)- measuring tape- user manual, Quick Start Guide
connector board at the upper side of the flow-meter
226
5921
3
4 12.1.2009 TSFLUXUS_F601V1-2EN
寸法(単位:mm)
G601 標準版 G601 マルチタイプ
アプリケーション 全ての気体流量測定 複雑な測定対応
出力
パッシブ出力 2 2バイナリ出力 2 2インプット
温度インプット - 1パッシブインプット - 2電圧インプット - 1アクセサリー ケース √ √
電源、ケーブル √ √
バッテリー √ √
クイックフィックス取付用冶具 √ √
シリアルポートデータ √ √
メジャー √ √
ダンピングマットと取り付け道具
√ √
マニュアル、簡単設定ガイド √ √
厚さ測定器 - √
出力アダプター - √
インプットアダプター - 2電流電圧インプットアダプター - 3
本体コネクター部
6 9.7.2008 TSFLUXUS_F601V1-1EN
FLUXUS® F601 Technical Specification
Dimensions (in mm)
FLUXUS F601
Standard Scopes of Supply F601 Standard F601 Energy F601 Multifunctional
422 tuptuo tnerruc evissap222 tuptuo yranib22- tupni erutarepmet2-- tupni tnerruc evissap
application all flow measurements on liquids including energy calculator for BTU and heat measurements
for sophisticated measuring tasks, e.g. modeling of pump curves
accessories - transport case- power supply, power cable- battery- QuickFix pipe mounting fixture for flowmeter- serial data kit- fastening shoes and chains
( transducer frequency M, Q)- measuring tape- user manual, Quick Start Guide
- transport case- power supply, power cable- battery- QuickFix pipe mounting fixture for flowmeter- serial data kit- fastening shoes and chains
( transducer frequency M, Q)- measuring tape- user manual, Quick Start Guide
- transport case- power supply, power cable- battery- output adapter- input adapter- QuickFix pipe mounting fixture for flowmeter- serial data kit- fastening shoes and chains
( transducer frequency M, Q)- measuring tape- user manual, Quick Start Guide
connector board at the upper side of the flow-meter
226
5921
3
4 12.1.2009 TSFLUXUS_F601V1-2EN6 9.7.2008 TSFLUXUS_F601V1-1EN
FLUXUS® F601 Technical Specification
Dimensions (in mm)
FLUXUS F601
Standard Scopes of Supply F601 Standard F601 Energy F601 Multifunctional
422 tuptuo tnerruc evissap222 tuptuo yranib22- tupni erutarepmet2-- tupni tnerruc evissap
application all flow measurements on liquids including energy calculator for BTU and heat measurements
for sophisticated measuring tasks, e.g. modeling of pump curves
accessories - transport case- power supply, power cable- battery- QuickFix pipe mounting fixture for flowmeter- serial data kit- fastening shoes and chains
( transducer frequency M, Q)- measuring tape- user manual, Quick Start Guide
- transport case- power supply, power cable- battery- QuickFix pipe mounting fixture for flowmeter- serial data kit- fastening shoes and chains
( transducer frequency M, Q)- measuring tape- user manual, Quick Start Guide
- transport case- power supply, power cable- battery- output adapter- input adapter- QuickFix pipe mounting fixture for flowmeter- serial data kit- fastening shoes and chains
( transducer frequency M, Q)- measuring tape- user manual, Quick Start Guide
connector board at the upper side of the flow-meter
226
5921
3
4 12.1.2009 TSFLUXUS_F601V1-2EN
配置
FLUXUS G601
TSFLUXUS_G601V2-1CN-1010 -5-
FLUXUSⓇ はFLEXIM会社のブランドで、保護されています。仕様は事前の予告なしに変更する場合がありますのでご了承願います。
V =V・P / P ・T / T・1 / K
TSFLUXUS_G601V1-5-1EN_Leu, 2014-02-25 5
Technical Specification FLUXUS® G601
Typical Measurement Setup
Standard Volumetric Flow RateThe standard volumetric flow rate can be selected as physical quantity to be measured. It will be calculated in-ternally by:
N = . p/pN . TN/T . 1/Kwhere
The operational pressure p and the operational temperature T of the medium will be entered directly as fixedvalues into the transmitter.
or:If inputs are installed (optional), pressure and temperature can be measured by the customer and fed in thetransmitter.
The gas compressibility coefficient K of the gas is entered in the transmitter:• as fixed value or• as approximation according to e.g. AGA8 or GERG
Example of a measurement setup in reflection arrangement with connection of the inputsto an external process pressure and process temperature measurement for standard volumetric flow rate calculation
N - standard volumetric flow rate- operating volumetric flow rate
pN - standard pressure (absolute value)p - operating pressure (absolute value)TN - standard temperature in KT - operating temperature in KK - compressibility coefficient of the gas: ratio of the compressibility factors of the gas at operating
conditions and at standard conditions Z/ZN
� � � � � � � � � � � � � � � � � � � �
� ��
�
� ��
� �� � � �
�� �
� � � �
� � � � �
� � �
� � � � �
� � � � �
�
� �
� � � � � � � � � � � � � � � � � �
�
� �
� � � � �
� � � � � �
� � � �
� � �� � � � � � �
P T
transducersdamping mat
transmitter
RS232
outputs inputs
power supply unit/battery charging unit
temperature probee.g. external pressure sensor
V· V·
V·
V·
セットアップ構成(事例)
FLUXUS® G601 技術仕様
電源
アナログ/バイナリーアウトプット
アナログインプット
反射モードセットアップ事例、標準体積流量出力事例(温度値、圧力値入力)
標準体積流量計算例
標準体積流量実体積流量標準圧力 (絶対値)実圧力(絶対値)標準温度(K)実温度(K)気体圧縮係数
-------
流体の実温度と実圧力を固定値としトランスミッターに入力可能
もしくはオプションにて、流体の実温度と実圧力を測定しトランスミッターに入力可能
気体圧縮係数 K をトランスミッターに入力・ 固定値として入力・ AGA8、GERG など推定値として入力
ダンピングマット
N N N N
PPTTK
N
N
トランスデューサ
温度プローブエネルギー測定セットアップ事例
Nvv
TSFLUXUS_G601V2-1CN-1010 -6-
FLUXUSⓇ はFLEXIM会社のブランドで、保護されています。仕様は事前の予告なしに変更する場合がありますのでご了承願います。
FLUXUS® G601技術仕様
TSFLUXUS_G601V1-5-1EN_Leu, 2014-02-25 11
Technical Specification FLUXUS® G601
Example for the Equipment of a Transport Case
serial data kit
power supply unit, mains cable
transducer mounting fixture
measuring tape
transmittertransducers
user manual,Quick Start Guide
coupling compoundwall thickness probe (optional)
QuickFix pipe mounting fixturetemperature probes (optional)
部品構成
シリアルデータキット
巻尺
取付用フレーム、チェーン
厚さ測定プローブ(オプション)
温度プローブ(オプション)
トランスデューサ
ユーザーマニュアルクイックスタートガイド
電源アダプター、ケーブル
カップリング剤
配管固定用金具(仕様による)
トランスミッター
TSFLUXUS_G601V2-1CN-1010 -7-
FLUXUSⓇ はFLEXIM会社のブランドで、保護されています。仕様は事前の予告なしに変更する場合がありますのでご了承願います。
FLUXUS® G601 技術仕様
テクニカルデータ
シェア波トランスデューサ
タイプ GDGINZ7 GDKINZ7 GDMINZ7 GDPINZ7オーダコード GSG - NNNNL GSK - NNNNL GSM -NNNNL GSP - NNNNL流体圧力 1可能最低必要圧力最低必要圧力
barbar
金属配管: 20金属配管: 30プラスチック配管: 1
金属配管: 20金属配管: 30プラスチック配管: 1
金属配管: 20金属配管: 30プラスチック配管: 1
金属配管: 20金属配管: 30プラスチック配管: 1
配管内径 2可能最小サイズ推奨最小サイズ推奨最大サイズ可能最大サイズ
mmmmmmmm
2503808101100
7080500720
304080120
15204060
配管肉厚
最小最大
mmmm
14 5 2.5 1.5
材料
ハウジング
接触面
PEEK / SUS304(1.4301)キャップPEEK
PEEK / SUS 304(1.4301)キャップPEEK
SUS 304(1.4301)
PEEK
SUS 304(1.4301)
PEEK保護等級( lEC / EN 60529 )
IP67 IP67 IP67 IP67
トランスデューサケーブル
タイプ長さ
m 16995
16995
16994
16994
寸法
縦 l横 b高さh
mmmmmm
129.55167
126.55167.5
603033.5
603033.5
寸法図面
運転温度
最小最大
℃℃
- 40+130
- 40+130
- 40+130
- 40+130
温度補正 X X X X
16 TSFLUXUS_G601V1-5-1EN_Leu, 2014-02-25
FLUXUS® G601 Technical Specification
Technical Data
Shear Wave Transducers technical type GDG1NZ7 GDK1NZ7order code GSG-NNNNL GSK-NNNNLtransducer frequency MHz 0.2 0.5medium pressure1
min. extended bar metal pipe: 20 metal pipe: 20min. bar metal pipe: 30
plastic pipe: 1metal pipe: 30plastic pipe: 1
inner pipe diameter d2
min. extended mm 250 70min. recommended mm 380 80max. recommended mm 810 500max. extended mm 1100 720pipe wall thicknessmin. mm 14 5max. mm - -materialhousing PEEK with stainless steel
cap 304 (1.4301)PEEK with stainless steel cap 304 (1.4301)
contact surface PEEK PEEKdegree of protection according to IEC/EN 60529
IP67 IP67
transducer cabletype 1699 1699length m 5 5dimensionslength l mm 129.5 126.5width b mm 51 51height h mm 67 67.5dimensional drawing
ambient temperaturemin. °C -40 -40max. °C +130 +130temperature compensation
x x
1 depending on application, typical absolute value for natural gas, nitrogen, compressed air2 shear wave transducer:
typical values for natural gas, nitrogen, oxygen, pipe diameters for other gases on requestpipe diameter min. recommended/max. recommended/max. extended: in diagonal arrangement and for a flow velocity of 15 m/s
l
hb
l
hb
16 TSFLUXUS_G601V1-5-1EN_Leu, 2014-02-25
FLUXUS® G601 Technical Specification
Technical Data
Shear Wave Transducers technical type GDG1NZ7 GDK1NZ7order code GSG-NNNNL GSK-NNNNLtransducer frequency MHz 0.2 0.5medium pressure1
min. extended bar metal pipe: 20 metal pipe: 20min. bar metal pipe: 30
plastic pipe: 1metal pipe: 30plastic pipe: 1
inner pipe diameter d2
min. extended mm 250 70min. recommended mm 380 80max. recommended mm 810 500max. extended mm 1100 720pipe wall thicknessmin. mm 14 5max. mm - -materialhousing PEEK with stainless steel
cap 304 (1.4301)PEEK with stainless steel cap 304 (1.4301)
contact surface PEEK PEEKdegree of protection according to IEC/EN 60529
IP67 IP67
transducer cabletype 1699 1699length m 5 5dimensionslength l mm 129.5 126.5width b mm 51 51height h mm 67 67.5dimensional drawing
ambient temperaturemin. °C -40 -40max. °C +130 +130temperature compensation
x x
1 depending on application, typical absolute value for natural gas, nitrogen, compressed air2 shear wave transducer:
typical values for natural gas, nitrogen, oxygen, pipe diameters for other gases on requestpipe diameter min. recommended/max. recommended/max. extended: in diagonal arrangement and for a flow velocity of 15 m/s
l
hb
l
hb
TSFLUXUS_G601V1-5-1EN_Leu, 2014-02-25 17
Technical Specification FLUXUS® G601
Shear Wave Transducers technical type GDM1NZ7 GDP1NZ7 GDQ1NZ7order code GSM-NNNNL GSP-NNNNL GSQ-NNNNLtransducer frequency MHz 1 2 4medium pressure1
min. extended bar metal pipe: 20 metal pipe: 20 metal pipe: 20min. bar metal pipe: 30
plastic pipe: 1metal pipe: 30plastic pipe: 1
metal pipe: 30plastic pipe: 1
inner pipe diameter d2
min. extended mm 30 15 6min. recommended mm 40 20 10max. recommended mm 80 40 20max. extended mm 120 60 30pipe wall thicknessmin. mm 2.5 1.5 1max. mm - - -materialhousing stainless steel 304
(1.4301)stainless steel 304 (1.4301)
stainless steel 304 (1.4301)
contact surface PEEK PEEK PEEKdegree of protection according to IEC/EN 60529
IP67 IP67 IP67
transducer cabletype 1699 1699 1699length m 4 4 3dimensionslength l mm 60 60 42.5width b mm 30 30 18height h mm 33.5 33.5 21.5dimensional drawing
ambient temperaturemin. °C -40 -40 -40max. °C +130 +130 +130temperature compensation
x x x
remark on request1 depending on application, typical absolute value for natural gas, nitrogen, compressed air2 shear wave transducer:
typical values for natural gas, nitrogen, oxygen, pipe diameters for other gases on requestpipe diameter min. recommended/max. recommended/max. extended: in diagonal arrangement and for a flow velocity of 15 m/s
hb
l
hb
l
hb
l
TSFLUXUS_G601V1-5-1EN_Leu, 2014-02-25 17
Technical Specification FLUXUS® G601
Shear Wave Transducers technical type GDM1NZ7 GDP1NZ7 GDQ1NZ7order code GSM-NNNNL GSP-NNNNL GSQ-NNNNLtransducer frequency MHz 1 2 4medium pressure1
min. extended bar metal pipe: 20 metal pipe: 20 metal pipe: 20min. bar metal pipe: 30
plastic pipe: 1metal pipe: 30plastic pipe: 1
metal pipe: 30plastic pipe: 1
inner pipe diameter d2
min. extended mm 30 15 6min. recommended mm 40 20 10max. recommended mm 80 40 20max. extended mm 120 60 30pipe wall thicknessmin. mm 2.5 1.5 1max. mm - - -materialhousing stainless steel 304
(1.4301)stainless steel 304 (1.4301)
stainless steel 304 (1.4301)
contact surface PEEK PEEK PEEKdegree of protection according to IEC/EN 60529
IP67 IP67 IP67
transducer cabletype 1699 1699 1699length m 4 4 3dimensionslength l mm 60 60 42.5width b mm 30 30 18height h mm 33.5 33.5 21.5dimensional drawing
ambient temperaturemin. °C -40 -40 -40max. °C +130 +130 +130temperature compensation
x x x
remark on request1 depending on application, typical absolute value for natural gas, nitrogen, compressed air2 shear wave transducer:
typical values for natural gas, nitrogen, oxygen, pipe diameters for other gases on requestpipe diameter min. recommended/max. recommended/max. extended: in diagonal arrangement and for a flow velocity of 15 m/s
hb
l
hb
l
hb
l
1、アプリケーションによる, 天然ガス、窒素、圧縮エアなど2、シェア波トランスデューサ: 天然ガス、窒素、酸素など一般的なガス。 その他のガスについては要相談 配管内径は、対角モード、流速 15m/s にての条件
TSFLUXUS_G601V2-1CN-1010 -8-
FLUXUSⓇ はFLEXIM会社のブランドで、保護されています。仕様は事前の予告なしに変更する場合がありますのでご了承願います。
FLUXUS® G601技術仕様
シェア波トランスデューサ (高温型タイプ)
タイプ GDMIEZ7 GDPIEZ7オーダコード GSM - ENNNL GSP - ENNNL流体圧力 1可能最低必要圧力最低必要圧力
barbar
金属配管: 20金属配管: 30プラスチック配管: 1
金属配管: 20金属配管: 30プラスチック配管: 1
配管内径 2可能最小サイズ推奨最小サイズ推奨最大サイズ可能最大サイズ
mmmmmmmm
304080120
15204060
配管肉厚
最小最大
mmmm
2.5 1.5
材料
ハウジング接触面
SUS 304(1.4301)SINTIMID ポリイミド
SUS 304(1.4301)SINTIMID ポリイミド
保護等級( lEC / EN 60529 )
IP65 IP65
トランスデューサケーブル
タイプ長さ
m 16994
16994
寸法
縦 l横 b高さh
mmmmmm
603033.5
603033.5
寸法図面
運転温度
最小最大
℃℃
- 30+ 200
- 30+ 200
温度補正 X X
1、アプリケーションによる, 天然ガス、窒素、圧縮エアなど2、シェア波トランスデューサ: 天然ガス、窒素、酸素など一般的なガス、その他のガスについては要相談 配管内径は、対角モード、流速15m/s にての条件
18 TSFLUXUS_G601V1-5-1EN_Leu, 2014-02-25
FLUXUS® G601 Technical Specification
Shear Wave Transducers (extended temperature range)technical type GDM1EZ7 GDP1EZ7 GDQ1EZ7order code GSM-ENNNL GSP-ENNNL GSQ-ENNNLtransducer frequency MHz 1 2 4medium pressure1
min. extended bar metal pipe: 20 metal pipe: 20 metal pipe: 20min. bar metal pipe: 30
plastic pipe: 1metal pipe: 30plastic pipe: 1
metal pipe: 30plastic pipe: 1
inner pipe diameter d2
min. extended mm 30 15 6min. recommended mm 40 20 10max. recommended mm 80 40 20max. extended mm 120 60 30pipe wall thicknessmin. mm 2.5 1.5 1max. mm - - -materialhousing stainless steel 304
(1.4301)stainless steel 304 (1.4301)
stainless steel 304 (1.4301)
contact surface Sintimid Sintimid Sintimiddegree of protection according to IEC/EN 60529
IP65 IP65 IP65
transducer cabletype 1699 1699 1699length m 4 4 3dimensionslength l mm 60 60 42.5width b mm 30 30 18height h mm 33.5 33.5 21.5dimensional drawing
ambient temperaturemin. °C -30 -30 -30max. °C +200 +200 +200temperature compensation
x x x
remark on request1 depending on application, typical absolute value for natural gas, nitrogen, compressed air2 shear wave transducer:
typical values for natural gas, nitrogen, oxygen, pipe diameters for other gases on requestpipe diameter min. recommended/max. recommended/max. extended: in diagonal arrangement and for a flow velocity of 15 m/s
hb
lh
bl
hb
l
18 TSFLUXUS_G601V1-5-1EN_Leu, 2014-02-25
FLUXUS® G601 Technical Specification
Shear Wave Transducers (extended temperature range)technical type GDM1EZ7 GDP1EZ7 GDQ1EZ7order code GSM-ENNNL GSP-ENNNL GSQ-ENNNLtransducer frequency MHz 1 2 4medium pressure1
min. extended bar metal pipe: 20 metal pipe: 20 metal pipe: 20min. bar metal pipe: 30
plastic pipe: 1metal pipe: 30plastic pipe: 1
metal pipe: 30plastic pipe: 1
inner pipe diameter d2
min. extended mm 30 15 6min. recommended mm 40 20 10max. recommended mm 80 40 20max. extended mm 120 60 30pipe wall thicknessmin. mm 2.5 1.5 1max. mm - - -materialhousing stainless steel 304
(1.4301)stainless steel 304 (1.4301)
stainless steel 304 (1.4301)
contact surface Sintimid Sintimid Sintimiddegree of protection according to IEC/EN 60529
IP65 IP65 IP65
transducer cabletype 1699 1699 1699length m 4 4 3dimensionslength l mm 60 60 42.5width b mm 30 30 18height h mm 33.5 33.5 21.5dimensional drawing
ambient temperaturemin. °C -30 -30 -30max. °C +200 +200 +200temperature compensation
x x x
remark on request1 depending on application, typical absolute value for natural gas, nitrogen, compressed air2 shear wave transducer:
typical values for natural gas, nitrogen, oxygen, pipe diameters for other gases on requestpipe diameter min. recommended/max. recommended/max. extended: in diagonal arrangement and for a flow velocity of 15 m/s
hb
l
hb
l
hb
l
TSFLUXUS_G601V2-1CN-1010 -9-
FLUXUSⓇ はFLEXIM会社のブランドで、保護されています。仕様は事前の予告なしに変更する場合がありますのでご了承願います。
タイプ GINC3 GRHINC3 GRKINC3オーダコード GLG - NNNNL GLH - NNNNL GLK - NNNNL流体圧力 1可能最低必要圧力
最低必要圧力
bar
bar
金属配管: 10
金属配管: 15プラスチック配管: 1
金属配管: 10
金属配管: 15プラスチック配管: 1
金属配管:10 (d>120 mm)5 (dく120 mm)金属配管:15 (d>120 mm)10 (dく120 mm)クラスチック配管: 1
配管内径 2可能最小サイズ推奨最小サイズ推奨最大サイズ可能最大サイズ
mmmmmmmm
1902209001600
1201406001000
6080300500
配管肉厚
最小最大
mmmm
1123
715
49
材料
ハウジング
接触面
PPSU / SUS304(1.4301)キャップPPSU
PPSU / SUS304(1.4301)キャップPPSU
PPSU / SUS304(1.4301)キャップPPSU
保護等級(lEC / EN 60529)
IP65 IP65 IP65
トランスデューサケーブル
タイプ長さ
m 16995
16995
16995
寸法
縦 l横 b高さh
mmmmmm
128.55167.5
128.55167.5
128.55167.5
寸法図面
運転温度
最小最大
℃℃
- 40+170
- 40+170
- 40+170
温度補正 X X X
FLUXUS® G601 技術仕様
TSFLUXUS_G601V1-5-1EN_Leu, 2014-02-25 19
Technical Specification FLUXUS® G601
Lamb Wave Transducers technical type GRG1NC3 GRH1NC3 GRK1NC3order code GLG-NNNNL GLH-NNNNL GLK-NNNNLtransducer frequency MHz 0.2 0.3 0.5medium pressure1
min. extended bar metal pipe: 10 metal pipe: 10 metal pipe:10 (d > 120 mm)5 (d < 120 mm)
min. bar metal pipe: 15plastic pipe: 1
metal pipe: 15plastic pipe: 1
metal pipe:15 (d > 120 mm)10 (d < 120 mm)plastic pipe: 1
inner pipe diameter d2
min. extended mm 190 120 60min. recommended mm 220 140 80max. recommended mm 900 600 300max. extended mm 1600 1000 500pipe wall thicknessmin. mm 11 7 4max. mm 23 15 9materialhousing PPSU with stainless steel
cap 304 (1.4301)PPSU with stainless steel cap 304 (1.4301)
PPSU with stainless steel cap 304 (1.4301)
contact surface PPSU PPSU PPSUdegree of protection according to IEC/EN 60529
IP65 IP65 IP65
transducer cabletype 1699 1699 1699length m 5 5 5dimensionslength l mm 128.5 128.5 128.5width b mm 51 51 51height h mm 67.5 67.5 67.5dimensional drawing
ambient temperaturemin. °C -40 -40 -40max. °C +170 +170 +170temperature compensation
x x x
1 depending on application, typical absolute value for natural gas, nitrogen, compressed air2 Lamb wave transducer:
typical values for natural gas, nitrogen, oxygen, pipe diameters for other gases on requestpipe diameter min. recommended/max. recommended: in reflection arrangement and for a flow velocity of 15 m/spipe diameter max. extended: in diagonal arrangement and for a flow velocity of 25 m/s
l
hb
l
hb
l
hb
TSFLUXUS_G601V1-5-1EN_Leu, 2014-02-25 19
Technical Specification FLUXUS® G601
Lamb Wave Transducers technical type GRG1NC3 GRH1NC3 GRK1NC3order code GLG-NNNNL GLH-NNNNL GLK-NNNNLtransducer frequency MHz 0.2 0.3 0.5medium pressure1
min. extended bar metal pipe: 10 metal pipe: 10 metal pipe:10 (d > 120 mm)5 (d < 120 mm)
min. bar metal pipe: 15plastic pipe: 1
metal pipe: 15plastic pipe: 1
metal pipe:15 (d > 120 mm)10 (d < 120 mm)plastic pipe: 1
inner pipe diameter d2
min. extended mm 190 120 60min. recommended mm 220 140 80max. recommended mm 900 600 300max. extended mm 1600 1000 500pipe wall thicknessmin. mm 11 7 4max. mm 23 15 9materialhousing PPSU with stainless steel
cap 304 (1.4301)PPSU with stainless steel cap 304 (1.4301)
PPSU with stainless steel cap 304 (1.4301)
contact surface PPSU PPSU PPSUdegree of protection according to IEC/EN 60529
IP65 IP65 IP65
transducer cabletype 1699 1699 1699length m 5 5 5dimensionslength l mm 128.5 128.5 128.5width b mm 51 51 51height h mm 67.5 67.5 67.5dimensional drawing
ambient temperaturemin. °C -40 -40 -40max. °C +170 +170 +170temperature compensation
x x x
1 depending on application, typical absolute value for natural gas, nitrogen, compressed air2 Lamb wave transducer:
typical values for natural gas, nitrogen, oxygen, pipe diameters for other gases on requestpipe diameter min. recommended/max. recommended: in reflection arrangement and for a flow velocity of 15 m/spipe diameter max. extended: in diagonal arrangement and for a flow velocity of 25 m/s
l
hb
l
hb
l
hb
TSFLUXUS_G601V1-5-1EN_Leu, 2014-02-25 19
Technical Specification FLUXUS® G601
Lamb Wave Transducers technical type GRG1NC3 GRH1NC3 GRK1NC3order code GLG-NNNNL GLH-NNNNL GLK-NNNNLtransducer frequency MHz 0.2 0.3 0.5medium pressure1
min. extended bar metal pipe: 10 metal pipe: 10 metal pipe:10 (d > 120 mm)5 (d < 120 mm)
min. bar metal pipe: 15plastic pipe: 1
metal pipe: 15plastic pipe: 1
metal pipe:15 (d > 120 mm)10 (d < 120 mm)plastic pipe: 1
inner pipe diameter d2
min. extended mm 190 120 60min. recommended mm 220 140 80max. recommended mm 900 600 300max. extended mm 1600 1000 500pipe wall thicknessmin. mm 11 7 4max. mm 23 15 9materialhousing PPSU with stainless steel
cap 304 (1.4301)PPSU with stainless steel cap 304 (1.4301)
PPSU with stainless steel cap 304 (1.4301)
contact surface PPSU PPSU PPSUdegree of protection according to IEC/EN 60529
IP65 IP65 IP65
transducer cabletype 1699 1699 1699length m 5 5 5dimensionslength l mm 128.5 128.5 128.5width b mm 51 51 51height h mm 67.5 67.5 67.5dimensional drawing
ambient temperaturemin. °C -40 -40 -40max. °C +170 +170 +170temperature compensation
x x x
1 depending on application, typical absolute value for natural gas, nitrogen, compressed air2 Lamb wave transducer:
typical values for natural gas, nitrogen, oxygen, pipe diameters for other gases on requestpipe diameter min. recommended/max. recommended: in reflection arrangement and for a flow velocity of 15 m/spipe diameter max. extended: in diagonal arrangement and for a flow velocity of 25 m/s
l
hb
l
hb
l
hb
ラム波トランスデューサ
1、アプリケーションによる, 天然ガス、窒素、圧縮エアなど2、ラム波トランスデューサ 天然ガス、窒素、酸素など一般的なガス、その他のガスについては要相談 配管内径(推奨最小値、推奨最大値)は、反射モード、流速 15m/s にての条件 配管内径(可能最小値、可能最大値)は、対角モード、流速 25m/s にての条件
TSFLUXUS_G601V2-1CN-1010 -10-
FLUXUSⓇ はFLEXIM会社のブランドで、保護されています。仕様は事前の予告なしに変更する場合がありますのでご了承願います。
タイプ GRMINC3 GRPINC3 GRQINC3オーダコード GLM - NNNNL GLP - NNNNL GLQ - NNNNL流体圧力 1最低必要圧力 bar 金属配管
10 (d>60mm)5 (dく60mm)プラスチック配管: 1
金属配管:10 (d>35 mm)5 (dく35mm)プラスチック配管: 1
金属配管:10 (d>15 mm)5 (dく15 mm)プラスチック配管: 1
配管内径 2可能最小サイズ推奨最小サイズ推奨最大サイズ可能最大サイズ
mmmmmmmm
304090150
15205070
7102235
配管肉厚
最小最大
mmmm
25
13
0.51
材料
ハウジング接触面
PPSU / SUS304(1.4301)キャップ
PPSU / SUS304(1.4301)キャップ
PPSU / SUS304(1.4301)キャップ
保護等級(lEC/EN 60529) IP65 IP65 IP65
トランスデューサケーブル
タイプ長さ
m16994
16994
16993
寸法
縦 l横 b高さh
mmmmmm
743240.5
743240.5
422225.5
寸法図面
運転温度
最小最大
℃℃
- 40+170
- 40+170
- 40+170
温度補正 X X X
備考 リクエスト
FLUXUS® G601技術仕様
20 TSFLUXUS_G601V1-5-1EN_Leu, 2014-02-25
FLUXUS® G601 Technical Specification
Lamb Wave Transducers technical type GRM1NC3 GRP1NC3 GRQ1NC3order code GLM-NNNNL GLP-NNNNL GLQ-NNNNLtransducer frequency MHz 1 2 4medium pressure1
min. extended bar - - -min. bar metal pipe:
10 (d > 60 mm)5 (d < 60 mm)plastic pipe: 1
metal pipe:10 (d > 35 mm)5 (d < 35 mm)plastic pipe: 1
metal pipe:10 (d > 15 mm)5 (d < 15 mm)plastic pipe: 1
inner pipe diameter d2
min. extended mm 30 15 7min. recommended mm 40 20 10max. recommended mm 90 50 22max. extended mm 150 70 35pipe wall thicknessmin. mm 2 1 0.5max. mm 5 3 1materialhousing PPSU with stainless steel
cap 304 (1.4301)PPSU with stainless steel cap 304 (1.4301)
PPSU with stainless steel cap 304 (1.4301)
contact surface PPSU PPSU PPSUdegree of protection according to IEC/EN 60529
IP65 IP65 IP65
transducer cabletype 1699 1699 1699length m 4 4 3dimensionslength l mm 74 74 42width b mm 32 32 22height h mm 40.5 40.5 25.5dimensional drawing
ambient temperaturemin. °C -40 -40 -40max. °C +170 +170 +170temperature compensation
x x x
remark on request1 depending on application, typical absolute value for natural gas, nitrogen, compressed air2 Lamb wave transducer:
typical values for natural gas, nitrogen, oxygen, pipe diameters for other gases on requestpipe diameter min. recommended/max. recommended: in reflection arrangement and for a flow velocity of 15 m/spipe diameter max. extended: in diagonal arrangement and for a flow velocity of 25 m/s
l
hb
l
hb
lh
b
20 TSFLUXUS_G601V1-5-1EN_Leu, 2014-02-25
FLUXUS® G601 Technical Specification
Lamb Wave Transducers technical type GRM1NC3 GRP1NC3 GRQ1NC3order code GLM-NNNNL GLP-NNNNL GLQ-NNNNLtransducer frequency MHz 1 2 4medium pressure1
min. extended bar - - -min. bar metal pipe:
10 (d > 60 mm)5 (d < 60 mm)plastic pipe: 1
metal pipe:10 (d > 35 mm)5 (d < 35 mm)plastic pipe: 1
metal pipe:10 (d > 15 mm)5 (d < 15 mm)plastic pipe: 1
inner pipe diameter d2
min. extended mm 30 15 7min. recommended mm 40 20 10max. recommended mm 90 50 22max. extended mm 150 70 35pipe wall thicknessmin. mm 2 1 0.5max. mm 5 3 1materialhousing PPSU with stainless steel
cap 304 (1.4301)PPSU with stainless steel cap 304 (1.4301)
PPSU with stainless steel cap 304 (1.4301)
contact surface PPSU PPSU PPSUdegree of protection according to IEC/EN 60529
IP65 IP65 IP65
transducer cabletype 1699 1699 1699length m 4 4 3dimensionslength l mm 74 74 42width b mm 32 32 22height h mm 40.5 40.5 25.5dimensional drawing
ambient temperaturemin. °C -40 -40 -40max. °C +170 +170 +170temperature compensation
x x x
remark on request1 depending on application, typical absolute value for natural gas, nitrogen, compressed air2 Lamb wave transducer:
typical values for natural gas, nitrogen, oxygen, pipe diameters for other gases on requestpipe diameter min. recommended/max. recommended: in reflection arrangement and for a flow velocity of 15 m/spipe diameter max. extended: in diagonal arrangement and for a flow velocity of 25 m/s
l
hb
l
hb
l
hb
20 TSFLUXUS_G601V1-5-1EN_Leu, 2014-02-25
FLUXUS® G601 Technical Specification
Lamb Wave Transducers technical type GRM1NC3 GRP1NC3 GRQ1NC3order code GLM-NNNNL GLP-NNNNL GLQ-NNNNLtransducer frequency MHz 1 2 4medium pressure1
min. extended bar - - -min. bar metal pipe:
10 (d > 60 mm)5 (d < 60 mm)plastic pipe: 1
metal pipe:10 (d > 35 mm)5 (d < 35 mm)plastic pipe: 1
metal pipe:10 (d > 15 mm)5 (d < 15 mm)plastic pipe: 1
inner pipe diameter d2
min. extended mm 30 15 7min. recommended mm 40 20 10max. recommended mm 90 50 22max. extended mm 150 70 35pipe wall thicknessmin. mm 2 1 0.5max. mm 5 3 1materialhousing PPSU with stainless steel
cap 304 (1.4301)PPSU with stainless steel cap 304 (1.4301)
PPSU with stainless steel cap 304 (1.4301)
contact surface PPSU PPSU PPSUdegree of protection according to IEC/EN 60529
IP65 IP65 IP65
transducer cabletype 1699 1699 1699length m 4 4 3dimensionslength l mm 74 74 42width b mm 32 32 22height h mm 40.5 40.5 25.5dimensional drawing
ambient temperaturemin. °C -40 -40 -40max. °C +170 +170 +170temperature compensation
x x x
remark on request1 depending on application, typical absolute value for natural gas, nitrogen, compressed air2 Lamb wave transducer:
typical values for natural gas, nitrogen, oxygen, pipe diameters for other gases on requestpipe diameter min. recommended/max. recommended: in reflection arrangement and for a flow velocity of 15 m/spipe diameter max. extended: in diagonal arrangement and for a flow velocity of 25 m/s
l
hb
l
hb
lh
b
ラム波トランスデューサ
1、アプリケーションによる, 天然ガス、窒素、圧縮エアなど2、ラム波トランスデューサ 天然ガス、窒素、酸素など一般的なガス、その他のガスについては要相談 配管内径(推奨最小値、推奨最大値)は、反射モード、流速 15m/s にての条件 配管内径(可能最小値、可能最大値)は、対角モード、流速 25m/s にての条件
TSFLUXUS_G601V2-1CN-1010 -11-
FLUXUSⓇ はFLEXIM会社のブランドで、保護されています。仕様は事前の予告なしに変更する場合がありますのでご了承願います。
FLUXUS® G601 技術仕様
ダンピングマット (オプション)ガス流量計測において、ダンピングマットは、計測上の音響ノイズを低減する。トランスデューサダンピングマットは、トランスデューサの下に置く。配管ダンピングマットは、反射部に置く。例えば、フランジや溶接部の近くに置く。
24 TSFLUXUS_G601V1-5-1EN_Leu, 2014-02-25
FLUXUS® G601 Technical Specification
Damping Mats (optional)Damping mats will be used for the gas measurement to reduce acoustic noise influences on the measure-ment.Transducer damping mats will be installed below the transducers.Pipe damping mats will be installed at reflection points, e.g. flange, weld.
Selection of Damping Matstype description outer pipe
diameterdimensions
l x b x htransducer frequency
techni-cal type
ambient temperature
remark
mm mm G H K M P °Ctransducer damping matD for temporary installation
(multiple use), fixed with coupling compound
< 80 450 x 115 x 0.5 - - - x x D20S3 -25...+60≥ 80 900 x 230 x 0.5 - - x x - D20S2
900 x 230 x 1.3 x x - - - D50S2pipe damping matA for temporary installation
(multiple use), fixed with coupling compound
< 300 300 x 115 x 0.5 x x x x x A20S4 -25...+60 for quantity see table below
B self-adhesive ≥ 300 l x 100 x 0.9 x x x x x B35R2 -35...+50 l - see table below
Quantity for Pipe Damping Mat - type A(depending on the outer pipe diameter)
outer pipe diameter D transducer frequencymm G, H K, M, P
100 12 6200 24 12300 32 16
Length of Pipe Damping Mat - type B(length l depending on transducer frequency and outer pipe diameter)
outer pipe diameter D transducer frequencyG, H K, M, P
mm m m300 12 6500 32 161000 126 63
b
lD
transducer damping mat pipe damping mat
reflection arrangementdiagonal arrangement
D - outer pipe diameter
reflection point
トランスデューサダンピングマット 配管ダンピングマット
対角モード 反射モード
反射部
ダンピングマットの選択
タイプ 記述配管外径
mm
寸法lxbxh
mm
周波数G H K M P
技術タイプ
運転温度℃
備考
トランスデューサダンピングマット
D 一時的な使用、カップリング剤と一緒に固定使用
く80 450 x 115 x 0.5 X X D20S3-25 ~ +60
≧80900×230×0.5 X X D20S2900×230×1.3 X X D50S2配管ダンピングマット
A 一時的な使用、カップリング剤と一緒に固定使用
く300 300 x 115 x 0.5 X X X X X A20S4 -25 ~ +60 下記参照
B 固着タイプ ≧300 1 x100 x 0.5 X X X X X B35R2 -35 ~ +50 下記参照
配管ダンピングマットの数 - タイプA(配管外径により数が決まる)
配管外径 Dmm
トランスデューサ周波数G,H I K,M,P
100 12 6200 24 12300 32 16
配管外径 D
トランスデューサ周波数G,H I K,M,P
mm m m300 12 6500 32 161000 126 63
配管ダンピングマットの長さ- タイプB(トランスデューサの周波数と配管外径により長さが決まる)
配管外径
TSFLUXUS_G601V2-1CN-1010 -12-
FLUXUSⓇ はFLEXIM会社のブランドで、保護されています。仕様は事前の予告なしに変更する場合がありますのでご了承願います。
探头固定夹具选择(适用于便携式流量计)
303 (1.4305)
滑尺长度: FSM:320mmFSQ:320mmFSS:120mm
材质: 不锈钢 304 (1.4301) ,
301 (1.4310) ,
Fastening Shoes (FS)(支持M、Q、S探头)
FSQ,FSM夹具 FSS夹具
尺寸:FSM: 420×48×68mmFSQ: 420×48×68mmFSS: 210×32×44mm
トランスデユーサ取付用冶具フレームタイプ
Fastening Shoes と チェーン
(M、Q、Sトランスデューサに適用)
材質:SUS 304(1.4301) 301(1.4310) 303(1.4305)
尺の長さ:FSM:320mmFSQ:320mmFSS:120mm
寸法FSM: 420×48×68mmFSQ: 420×48×68mmFSS: 210×32×44mm
FLUXUS® G601技術仕様
TSFLUXUS_G601V2-1CN-1010 -13-
FLUXUSⓇ はFLEXIM会社のブランドで、保護されています。仕様は事前の予告なしに変更する場合がありますのでご了承願います。
303 (1.4305)
420 x 55 x 68 mm FSM: 320mm FSQ: 320mm
304 (1.4301) , 301 (1.4310) ,
( ) ( M Q )( Fastening Shoes )
材質:SUS 304(1.4301) 301(1.4310) 303(1.4305)
尺の長さ:FSM:320mmFSQ:320mm
寸法420 x 55 x 68 mm
トランスデュサー取付用冶具フレームタイプ
Fastening Shoes とマグネット (オプション)
マグネットタイプ (オプション) (M、Qトランスデューサに適用) (Fastening Shoesに合わせて使用する)
FLUXUS® G601 技術仕様
TSFLUXUS_G601V2-1CN-1010 -14-
FLUXUSⓇ はFLEXIM会社のブランドで、保護されています。仕様は事前の予告なしに変更する場合がありますのでご了承願います。
トランスデューサ取付用冶具共用タイプ (オプション)
Variofixとチェーンー ー
Variofix VP G、H、K、M、P、Q
301 (1.4310)303 (1.4305)
414×94×76mm364 m 304 (1.4301) , ,
共用タイプVariofix VP及びチェーン(G 、H、K、M、P、Qトランスデューサに適用)
材質:SUS 304(1.4301) 301(1.4310) 303(1.4305)
レールの長さ364 mm
寸法414×94×76mm
FLUXUS® G601技術仕様
TSFLUXUS_G601V2-1CN-1010 -15-
FLUXUSⓇ はFLEXIM会社のブランドで、保護されています。仕様は事前の予告なしに変更する場合がありますのでご了承願います。
探头固定夹具选择
尺寸: 180 × 103 × 40mm
挠性管夹具(支持Q、S探头)
材质:不锈钢 304(1.4301) 301(1.4310) 303(1.4305)
导轨长度:42mm
トランスデューサ取付用冶具フレキシブルパイプ用(オプション)
フレキシブルパイプ用取付用冶具(Q、Sトランスデューサに適用)
材質:SUS 304(1.4301) 301(1.4310) 303(1.4305)
レールの長さ:42mm
寸法180 × 103 × 40mm
FLUXUS® G601 技術仕様
TSFLUXUS_G601V2-1CN-1010 -16-
FLUXUSⓇ はFLEXIM会社のブランドで、保護されています。仕様は事前の予告なしに変更する場合がありますのでご了承願います。
接続部
TSFLUXUS_G601V1-5-1EN_Leu, 2014-02-25 25
Technical Specification FLUXUS® G601
Connection Systems
Transducer Cable
Technical Data
connection system NL
transducer frequency(3d character of transducer
order code)
G, H, K M, P Q S
NL
x y l1 x y l1 x y l1 x y lcable length m 2 3 ≤ 25 2 2 ≤ 25 2 1 ≤ 25 1 1 ≤ 20
1 > 25...100 m on requestx, y - transducer cable lengthl - max. length of extension cable
transducer cable extension cabletype 1699 2551 1750standard length m see table above 5
10max. length m - see table above 10ambient temperature °C -55...+200 -25...+80 < 80sheathmaterial stainless steel 304 (1.4301) - -outer diameter mm 8 - -cable jacketmaterial PTFE TPE-O PEouter diameter mm 2.9 8 6thickness mm 0.3 0.5color brown black blackshield x x x
trans
mitt
er
l x y
-
接続NL
トランスデューサ周波数タイプ(オーダーコード3番目) G,H,K M,P Q S
NL
ケーブル長さ m x2
y3
I1≦25
x2
y2
I1≦25
x2
y1
I1≦25
x1
y1
I≦20
>25 ~ -100 m リクエストによるx, y - トランスデューサケーブルによるI-延長ケーブル最大長さ
トランスデューサケーブル
テクニカルデータ
トランスデューサケーブル 延長ケーブル
タイプ 1699 2551標準長さ m 上記 5
10最大長さ m 上記
運転温度 ℃ -55 ~ +200 -25 ~ +80シース
材質外径
mm SUS 304 (1.4301)8
ケーブルジャケット
材質外径厚み色シールド
mmmm
PTFE2.90.3ブラウンX
TPE - ○8
ブラックX
FLUXUS® G601技術仕様
トランスミッタ
TSFLUXUS_G601V2-1CN-1010 -17-
FLUXUSⓇ はFLEXIM会社のブランドで、保護されています。仕様は事前の予告なしに変更する場合がありますのでご了承願います。
FLEXIM - イメージ
TSFLUXUS_G601V2-1CN-1010
フレキシム ジャパン
〒260-0015
千葉県千葉市中央区富士見 2-7-9
富士見ビル 609 号
Tel:047-727-4393
Fax:047-727-4393
E-mail:[email protected]
internet: www.flexim.com
FLEXIM JAPAN
Fujimi Building 609
2-7-9 Fujimi, Chuo-ku,Chiba-shi,
Chiba,260-0015 Japan
Tel:+81-47-727-4393
Fax:+81-47-727-4393
E-mail:[email protected]
internet: www.flexim.com
本社:FLEXIM GmbHWolfener Straße 36D-12681 BerlinTel.: +49 (30) 93 66 76 - 60Fax: +49 (30) 93 66 76 - 80E-Mail: [email protected]
海外支社:FLEXIM AMERICAS CorporationHeadquarters250-V Executive DriveEdgewood, New York 11717Tel.: (631) 492-2300Fax: (631) 492-2117Toll free: 1-888-852-7473E-Mail: [email protected]
FLEXIM France SARL13 Rue de ParcF-67205 OberhausbergenTel.: +33 (0)3 88 27 78 02Fax: +33 (0)3 88 27 78 45E-Mail: [email protected]
FLEXIM Instruments Benelux B.V.Berkelse Poort 127NL-2651 JX Berkel en RodenrijsTel.: +31 (0)10 24 92 333Fax: +31 (0)10 24 92 339E-Mail: [email protected]
FLEXIM GmbH (Austria)Greiner 376A-7534 OlbendorfÖsterreichTel.: +43 (3326) 529 81Fax: +43 (3326) 529 81 14E-Mail: [email protected]
FLEXIM Instruments Asia Pte Ltd.#04-61 German CentreSingapore 609916Tel.: +65 656 286 10Fax: +65 656 286 11E-Mail: [email protected]
FLEXIM China1804-05 Xinyin Tower888 Yishan RoadShanghai, 200233Tel.: +86 21 6495 7520Fax: +86 21 6495 7590E-Mail: [email protected]
FLUXUSⓇ はFLEXIM会社のブランドで、保護されています。仕様は事前の予告なしに変更する場合がありますのでご了承願います。