forengineeringprojects.com/tender/uploadfiles/3543_vol-iii.pdf · 2018-07-27 · sl. no....
TRANSCRIPT
AN ISO 9001 & 14001 COMPANY
TENDER DOCUMENT
TENDER No: DLI/CON/771-B/630
FOR
Tender for Construction of Up-graded High School at (1) Gudrigaon,
Bastingia, Block - Chakapada, Odisha (2) Mundagaon, Block-
Chakapada, Odisha (3) Gistikhole, Block - Chakapada, Odisha.
VOLUME – III
PRICE BID/BILL OF QUANTITY
1 Gudrigaon, Bastingia, Block - Chakapada, Odisha
2 Mundagaon, Block - Chakapada, Odisha
3 Gistikhole, Block - Chakapada, Odisha
Grand Total (In Fig)
Grand Total (In Words)
Note :- 1.The postion of Bidder will as per Gross Value of their Quoted amount as in
Summary Sheet.
2.The Bidder has to quote above/At Par/below percentage (%) inclusive of all Taxes
and duties including GST.
3. Bidder has to mention the breakup of cost and levies such as GST and other taxes
considered in the quoted prices.
Summary Sheet of Price Bids
(A GOVERNMENT OF INDIA ENTERPRISE)
ENGINEERING PROJECTS (INDIA) LTD.
Name Of Work :- Construction of Up-graded High School at (1) Gudrigaon, Bastingia, Block -
Chakapada, Odisha (2) Mundagaon, Block- Chakapada, Odisha (3) Gistikhole, Block - Chakapada,
Odisha
SI. No. Description/ LocationQuoted Price
In Rs.
NIT No.DLI/CON/771-B/630 DATED 21.06.2018
Sign Stamp of EPIL Sign Stamp of Bidder
1 2 3
In figures In words In figures In words
1 CIVIL WORKS
SubTotal 20482164.20
2 PH WORK
SubTotal 2807106.00
3 ELECTRICAL WORKS
SubTotal 2565239.00
4 MISCELLENEOUS ITEM
SubTotal 2627119.99
5 BOREWELL
SubTotal 243687.00
Total 28725316.18
Note :- 1. The postion of Bidder will as per Gross Value of their Quoted amount as in Summary Sheet
2.The Bidder has to quote above/At Par/below percentage (%) inclusive of all Taxes & Duties including GST.
3. Bidder has to mention the breakup of cost and levies such as GST and other taxes considered in the quoted prices.
CONSTRUCTION OF UPGRADED HIGH SCHOOL AT GUDRIGAON ,CHAKAPADA ,KANDHAMAL, ODISHA
PRICE SCHEDULE
SI. No. DESCRIPTION
ESTIMATED COST
(Rs.)
TO BE QUOTED BY TENDERER
% ( - ) Below / At Par/AboveAMOUNT IN Rs. AFTER ADDING %
(-) BELOW / AT PAR / (+) ABOVE
4 5= (3 x 4 )
Sign and Stamp of EPIL Sign and Stamp of Bidder
1 2 3
1 CIVIL WORKS
SubTotal 20482164.20
2 PH WORK
SubTotal 2807106.00
3 ELECTRICAL WORKS
SubTotal 2565239.00
4 MISCELLENEOUS ITEM
SubTotal 2627119.99
5 BOREWELL
SubTotal 243687.00
Total 28725316.18
CONSTRUCTION OF UPGRADED HIGH SCHOOL AT GUDRIGAON ,CHAKAPADA
,KANDHAMAL, ODISHA
BOQ SUMMARY SHEET
SI. No. DESCRIPTION
ESTIMATED COST (Rs.)
Sign and Stamp of EPIL Sign and Stamp of Bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
CIVIL WORKS
1 Site Clearance
ref. from analysis
item no-3 page
no-198
Clearing and grubbing road land including
uprooting rank vegetation, grass, bushes,
shrubs ,sapling and trees girth up to 300 mm,
removal of stumps of trees cut earlier and disposal of
unserviceable material and stacking
of serviceable material to be used or auctioned, up to a
lead of 1000 metres including removal
and disposal of top organic soil not exceeding
150 mm in thickness. 1166.00 sqm 3.87 4509.04
2 i) Surface cutting
ref. from analysis
item no-3 page
no-6
Earthwork in stoney earth and gravels mixed with stone
and boulder not exceeding 0.014 cum in volume within
50m initial lead and 1.5 m initial lift including rough
dressing and breaking clods to maximum 5 cm to 7 cm
and lying in layers not exceeding 0.3 m in depth and as
per specification approved by the department.
514.60 cum 199.55 102690.90
ref. from analysis
item no-5 page no-
4
Cutting in disintegrated rock not requiring blasting tobe
removed by pick axes and crow bar sand depositing
materials within 50m lead and 1.5m initial lift including
rough dressing as per direction and specification of the
department, stacking useful materials separately as
ordered. 514.60 cum 324.36 166914.88
3 a) Earthwork Excavation for foundation
ref. from analysis
item no-2(a) page
no-2
Earth work in excavation in all kinds of soil by
mechanical means (Hydraullic excavator) / manual
means overareas (exceeding 30 cm in depth, 1.5 m in
width as well as 10sqm on plan) inculding disposal of
excavated earth up to 50 m and lift upto 1.5m with all
lead and lift including shoring, shuttering & dewatering
(if required) with cost of all Labour, Labourcess ,Hire &
Running charges of the water pumps, T & P required for
the work complete asdirected by the Engineer- in-
charge.
i) hard soil 946.35 cum 127.97 121102.33
ref. from analysis
item no-3 page no-
4
ii) Soft Rock 69.60 cum 199.55 13889.01
ref. from analysis
item no-19 page
no-9
iii) Hard Rock 69.60 cum 1690.20 117637.92
b) ref. from analysis
item no-8 page no-
6
Extra for every additional lift of 1.5 m or part there
of in excavation/ banking excavated or stacked
materials
Hard soil 68.71 CUM 10.20 700.84
Ordinary /hard rock 68.71 CUM 58.30 4005.79
4 Sand Filling
ref. from analysis
item no-15 page
no-10
Supplying & Filling foundation trenches , plinth &
ditches with clean course river sand well watered and
rammed in layers not exceeding 23 c.m. in depth with
all lead and lift including cost conveyance, loading,
unloading, stacking , royalties and all taxes of
sand,cost & conveyance of water, cost of all
Labour,labour cess,T&P required for the work etc.
complete in all respect as directed by the Engineer- in-
charge.579.37 cum 273.10 158225.95
5 P.C.C( 1:4:8)
CONSTRUCTION OF UPGRADED SCHOOL AT
GUDRIGAON,BASTINGIA,CHAKAPADA,KANDHAMAL, ODISHA
Sign and stamp of EPIL 1 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
ref. from analysis
item no-4 page no-
43
Providind and laying of cement concrete of grade 1:4:8
(1 Cement : 4 coarse sand : 8 graded stone aggregate
40 mm nominal size of approved quality from quarry
mixing in concrete mixer,lowering and compacting in
proper thickness ,watering and curing for the required
period.including all cost of labour ,material
,conveyance, royalities and taxes,sundries,T&P etc,but
excluding cost of centering and shuttering all complete
as per the direction of Engineer-In-Charge.
138.12 cum 4148.00 572921.76
6 BACK FILLING
ref. from analysis
item no-14 page
no-10
Filling available excavated earth (excluding rock) in
trenches plinth sides of foundation etc.in layers not
exceeding 20 cm in deepth ,consolidating each
deposited layers by ramming and watering ,lead up to
50 m and lift up to 1.5 mt. etc including cost of all labour
, sundries etc complete in all respect as per the
direction of Engineer-In-Charge.310.44 cum 71.10 22072.28
7 ANTITERMITE TREATMENT
MR
Supplying, diluting and preparing chemical emulsion like
CHLORPYRIPHOS or other chemicals approved by
Central Insecticides Board or as directed by the
manufacturer and spraying the mixture uniformly by
sprayer as pre-constructional anti termite treatment and
creating a chemical barrier under and around the
column pits, wall trenches, basement excavation, top
surface of plinth filling, junction of walls and floors
along with external perimeter of the building, expansion
joints, surrounding the pipes and conduits etc. complete
at the rate of 7.5 liters (or as directed by the
manufacturer) per sqm on vertical and 5.0 liters per
sqm on horizontal surfaces, 50% of the emulsion to be
filled in the holes made in trenches at 150mm center to
center etc.complete as per IS:6313/1981(Part-II) and as
per the direction of the Engineer-in-charge including
cost of all materials, labour, taxes, etc. complete.
1141.88 sqm 75.00 85641.00
8 R.C.C.M25
ref. from analysis
item no-1(c) page
no-259
Providing, lifting, hoisting and laying Reinforced cement
concrete of M-25 Grade for Footings, plinth
band,beam,column, lintel and slab. with 12mm to 20mm
size black hard crusher broken granite chips of
approved quality from approved quarry including mixing
and compacting to proper shape and size, level and
plumbs and finishing the exposed surfaces smooth,
scaffolding, watering and curing for the required period
including cost of all materials with taxes, royalties
transportation, loading and unloading, all labour,
sundries,T&P including hire & running charges of
concrete mixer and vibrator etc completed as per
direction of the Engineer-in-charge , including the cost
for centering and shuttering but excluding cost for
reinforcement bars for the work
8.1 Column base footing 178.90 cum 5369.85 960650.73
8..2 Plinth beam 39.69 cum 5670.31 225036.08
8.3 Column - Gr. Floor 59.49 cum 10490.83 624051.05
8.4 Column - 1st. Floor 37.75 cum 11593.45 437611.02
8.5 Column - 2nd Floor 9.73 cum 12913.96 125641.84
8.6 Lintel - Gr. Floor 9.49 cum 8232.15 78114.02
8.7 Lintel - 1st. Floor 8.07 cum 8883.03 71643.99
Sign and stamp of EPIL 2 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
8.8 Beam -g floor 45.03 cum 10490.83 472446.81
8.9 Beam - 1ST floor 38.42 cum 11593.45 445420.12
8.10 Beam - Terrace floor 3.20 cum 12913.96 41376.75
8.11 Roof slab -G floor 125.40 cum 8554.98 1072763.17
8.12 Roof slab - 1st floor 103.58 cum 9270.43 960220.65
8.13 Roof slab - Head room level 8.49 cum 10126.34 86001.90
8.14 Staircase - Gr. Floor 12.55 cum 9055.44 113677.72
8.15 Staircase - 1st. Floor 10.16 cum 9870.99 100316.86
8.16 Chaja G floor 74.54 SQM 705.20 52565.54
8.17 Chaja 1st floor 38.51 SQM 781.53 30096.66
9 Reinforcement
.Providing, fixing TOR Fe-500 reinforcement bars for
RCC work of required diameter of approved quality with
straightening, cutting, bending, binding welding and
joining (if necessary) and tying the grills and placing in
position as required for R.C.C. work and providing fan
hooks, hoisting, lowering and laying including cost,
conveyance and taxes of M.S. Rods or tor steel and
binding wires of 18 to 20 gauge and labour required for
the work for bending, binding and tying the grills in all
heights as per the specification & direction of E-I-C.
(Linear measurements will be taken & quantity will be
calculated on standard weight. Weight of binding wire
will not be considered for measurement.)
Foundation and plinth 199.23 QNTL 5542.59 1104249.94
Ground Floor 298.27 QNTL 5542.59 1653170.03
First Floor 251.40 QNTL 5556.87 1397007.94
Terrace Floor 36.36 QNTL 5571.87 202593.25
10 Fly Ash Brick Masonary (1:6) (superstructure)
ref. from analysis
item no-3 page no-
73
Brick work with Fly Ash bricks size having crushing
strength not less than 75Kg/cm2 with dimensional
tolerance ±8 percent in cement mortar1:6 in Super
structure including watering curing, cost of carriage,
royalty and taxes of all materials, cost of all labour, T&P
etc complete as per the direction of E.I.C.
Substructure 97.27 Cum 3571.70 347419.26
Ground Floor 292.59 Cum 3605.00 1054786.95
First Floor 298.00 Cum 3778.20 1125903.60
Terrace Floor 90.50 Cum 3977.30 359945.65
11 Fly Ash Brick Masonary (1:4) (in superstructure)
ref. from analysis
item no-2 page no-
71
Fly ash bricks masonary work using having crushing
strength not less than 3.5 kg /cm2 in cement mortar
1:4) for half brickmasonary (110mm) walls
Ground Floor 30.66 Cum 3779.50 115879.47
First Floor 26.81 Cum 3817.80 102355.22
12 12 mm Plastering
ref. from analysis
item no-4 page no-
105
Providing 12mm thick cement plaster to the surface of
brick masonary wall with cement mortar (1:6) including
racking out joints, scraping and cleaning the surface
and finishing the plaster surface smooth using wooden
floats only to proper plumbs and level and making
grooves and beads to give required ornamental finish
as per drawings including cost of all materials,
conveyance, loading and unloading, all taxes and
royalities, all labour, scaffolding, watering and curing,
sundries and T&P etc all complete as per direction of
the Engineer- in- charge.
Ground Floor 2706.28 Sqm 102.20 276582.07
First Floor 2271.61 Sqm 105.70 240108.84
Sign and stamp of EPIL 3 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
Terrace Floor 123.56 Sqm 109.30 13504.73
13 16 mm Plastering
ref. from analysis
item no-14 page no-
105
Providing 16 mm thick cement plaster to the surface of
brick masonary wall with cement mortar (1:6) including
racking out joints, scraping and cleaning the surface
and finishing the plaster surface smooth using wooden
floats only to proper plumbs and level and making
grooves and beads to give required ornamental finish
as per drawings including cost of all materials,
conveyance, loading and unloading, all taxes and
royalities, all labour, scaffolding, watering and curing,
sundries and T&P etc all complete as per direction of
the Engineer- in- charge.
Ground Floor 1031.40 Sqm 146.20 150791.17
First Floor 928.94 Sqm 149.40 138784.10
Terrace Floor 774.38 Sqm 152.70 118247.78
14 6 mm Plastering
ref. from analysis
item no-27 page no-
109
Providing 6mm thick cement plaster with cement mortar
of (1:4) to ceilings of roof slabs, stairs, landings, chajja,
shelves, columns, beams and lofts etc. including
roughening, scraping and cleaning and finishing the
plastered surface smooth using wooden floats only to
proper plumbs and level, making grooves and beads to
give required ornamental finish as per drawing including
cost of all materials, conveyance, loading and
unloading, all taxes and royalities, all labour,
scaffolding, watering and curing, sundries and T&P etc
all complete as per direction of the Engineer- in- charge.
Ground Floor 904.27 Sqm 112.10 101368.40
First Floor 729.35 Sqm 114.60 83584.05
Terrace Floor 58.59 Sqm 117.20 6867.25
15 Grading plaster
ref. from analysis
item no-18 page no-
48
4cm thick grading concrete 1:2:4 on roof slab with 12
mm and down graded size hard crusher broken grinite
chips including watering curing cost of materials add
water proofing compounds for the works etc, complete
as per the specification of the engineer-in-charge.
portico 91.86 Sqm 515.70 47372.20
Terrace Floor 964.86 Sqm 561.00 541286.46
b) Water proofing
AR
Providing and laying water proofing treatment in sunken
portion of wc, bathroom etc by applying cement slurry
mixed with water proofing cement compound as per
direction of Engineer-in-charge.
385.24 Sqm 417.34 160775.43
16 Artificial Stone Flooring
ref. from analysis
item no-2 page no-
84
Providing and laying 5cm artificial stone flooring with
cement concrete (1:2:4) including punning using 12mm
size hand broken granites chips. Including providing
and fixing glass strips in joints of cement concrete floors
in 1m x 1m grid. 40mm wide and 4 mm thick including
cost of all materials, labours, taxes & royalities,
conveyance, loading and unloading, sundries, T&P etc.
Complete as per the specification & direction of
Engineer- in- charge.
Ground Floor 873.14 Sqm 370.20 323235.82
First Floor 755.11 Sqm 377.40 284976.78
17 Cement Punning for skirting
Sign and stamp of EPIL 4 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
ref. from analysis
item no-6 page no-
103
Providing and laying 12mm thick cement plaster (1:4)
over brick work with cement punning in skirting.
Including cost of all materials , labours, taxes &
royalities, conveyance, loading and unloading, sundries,
T&P etc. Complete as per the specification & direction
of Engineer- in- charge.
Ground Floor 84.27 Sqm 136.20 11477.70
First Floor 64.94 Sqm 138.30 8980.87
18 Antiskid Ceramic Tile Flooring
ref. from analysis
item no-16 page no-
91
Providing and laying best quality Anti skid Ceramic floor
tile of size 300mm x 300mm x 8mm of approved make
confirming to IS-15622 specifications in floor over
20mm thick cement moratar (1:4) to proper slope, line
and level including cutting to required size and shape,
fixing at corners and splays etc.Including finishing the
joints with epoxy based water proofing grout to match
the color and shade of tiles complete as per the design
& drawing with cost of all materials, labour, conveyance,
taxes, T&P etc. All complete as per the direction of
Engineer- in- charge.
Ground Floor 80.20 Sqm 714.20 57278.84
First Floor 103.63 Sqm 720.30 74645.52
23 Glazed Dado
Providing and fixing 1st quality ceramic glazed wall tiles
conforming to IS:15622 (thickness to be specified by
the manufacturer), of approved make, in all colours,
shades except burgundy, bottle green, black of any size
as approved by Engineer- in- charge, in skirting, risers
of steps and dados, over 12mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) and jointing with
grey cement slurry @ 3.3kg per sqm, including pointing
in white cement mixed with pigment of matching shade
complete (Basic cost - 400/sqm)
ref. from analysis
item no-17 page
no-90 Ground Floor
356.66 Sqm 650.90
232147.25
First Floor 388.68 Sqm 660.10 256569.76
24 PVC Doors For Toilets
Supplying fitting fixing of P.V.C. door of approved quality
including cost of all materials labour T&P etc complete.
MR G FLOOR 28.73 SQM 1846.42 53047.53
FIRST FLOOR 26.64 SQM 1846.42 49188.52
25 DOOR FRAME
Supplying fitting and fixing of door frame made of
seasoned sal wood cost of all labour, all taxes and
T&P etc. complete.
1.89 CUM 46685.80 88236.16
AR
26 FLUSH Door
Supplying fitting and fixing of flush door made out of
32mm flush door including cost of all materials, cost of
all fittings (hinges, tower bolt, aldrop, hadle, screw etc.)
and cost of all labour, all taxes and T&P etc. complete.
AR Ground Floor 40.23 SQM 5395.30 217052.92
First Floor 17.40 SQM 5395.30 93870.69
Second Floor 1.89 SQM 5395.30 10197.12
B) MS DOOR
Sign and stamp of EPIL 5 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
Supplying of M.S. Door, Window with grills, Grills,
collapsible gates made out of M.S. Angle frame, M.S.
Flat, Sheet etc of approved section & design,
electrically welded properly with all necessary locking
arrengement, and 1 coat red oxide primer including cost
of all materials, labour T&P, carriage of materials to site
etc. complete
Arrived from epm
rate Ground Floor782.75 KG 70.20 54948.75
First Floor 616.91 KG 70.20 43307.07
Second Floor 92.04 KG 70.20 6461.13
27 ALUMINIUM Windows
Supplying fitting and fixing ofALUMINIUM SLIDING
WINDOW including cost of all materials, cost of all
fittings WITH GLASS and cost of all labour, all taxes
and T&P etc. complete
Ground Floor 43.42 SQM 3169.00 137597.89
AR First Floor 32.81 SQM 3169.00 103958.98
B) M S WINDOW
M.S Panelled Window double leafed shutter with M.S.
Frame & Grill. Made out of the following materials .
Frame:-35x35x6mm M.S angle ,Shutter style Top &
Bottom rail 25x25x3mm M.S Angle.Window panel :-
1.0mm C.R. sheet. Pannel stiffener covering width of
each leaf:-19x5mm,M.S flat 2 nos on each leaf.Hinges
size:-100mm-4 nos(2 nos. each side) bought out as per
ISS.Hold fast :-35x35x6mm MS Angle 100 mm length
bifurcated at the tip 2 nos. on each side.Handle:-
19x5mm M.S Flat fabricated(inside) Tower bolt :2
nos.as per ISS.
Ground Floor 1715.64 KG 68.00 116663.52
Arrived from epm
rate First Floor 1449.1KG 68.00 98538.80
28 VENTILATORS
Arrived from epm
rate
Providing and fixing of Fixed Ventilators of approved
make to be fabricated from roll formed sections made of
pre-painted steel (base steel as per IS-513 of 0.6 mm
thick “D” quality, galvanized as per IS-277 with zinc of
120 Gm/Sq.mtr) with paint specification being with
primer of 5-7 microns and finished paint with polyster
paint (Black /Pearl white/ Chocolate Brown) of 12-16
microns alongwith the alkyd backer at the back of 5-7
microns and the sizes of outer frame being of 46x52
mm and with all vertical and horizontal mullions are of
46x70 mm and fixed beadings are of 18x25 mm.
Accessories / gaskets are to be used as per the
manufacturer’s supply and specification like handle
being made of high grade aluminium powder coated
and with nylon receiver and gasket will be made of
EPDM. All corner brackets are to be made of CRCA
with zinc phosphating. The mullion caps and louvered-
clips should be of glass filled nylon. The sections are to
be cut to length, mitre joined with corner bracket and
frames are fixed to the concrete/masonry walls by
means of self expanding screws and glass to be used of
5 mm with all taxes complete.
Ground Floor 19.05 Sqm 4412.00 84036.62
First Floor 23.57 Sqm 4414.00 104054.00
ref. from analysis
item no-15 page
no-251 Second Floor
2.53 Sqm 4414.00 11154.28
29 M.S. Grill
Sign and stamp of EPIL 6 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
Providing, fitting & fixing M.S grill fabricated from 12mm
and 16mm square bars as per approved drawing and
design including cost, conveyance & taxes of all
materials, fabrication charges, fixing in position to RCC
columns / walls in cement concrete (1:2:4) and making
good to the damages complete as per direction of the
Engineer- in- charge. The rates shall be inclusive of all
cost of materials, labour, T&P shuttering etc complete.
Ground Floor 2521.45 Kg 57.60 145235.52
First Floor 2350.76 Kg 57.60 135403.78
Arrived from epm
rate
B)
Labour charges for fitting, fixing M.S. gates (M.S Door,
Window with grills, Grills, collapsible gates) as per
approved design including cost of all labour, T&P etc.
complete.
312.84 SQM 68.10 21304.40
30 S.S. RAILING
ref. from analysis
item no-11 page
no-244
Supplying, fitting of stainless steel of 304 grade in hand
railing using 50 mm dia of 2 mm thick circular pipe with
Balustrade of size 32 mmx32 mmx2 mm @0.90 mtr c/c
and stainless square pipe bracing of size 32mm x
32mmx 2 mm in 3 rows in stair case as per approved
design etc complete.
Ground Floor 33.64 Rmt 3209.86 107979.69
First Floor 19.60 Rmt 3209.86 62913.26
31 Synthetic Enamel Paint
ref. from analysis
item no-3 page no-
93
Painting synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade
with two or more coats on new work over a coat of
suitable shade with primer of approved brand as per
manufacture's specification including cost of all
materials with taxes and transportation , all labour,
scaffolding, sundries, T&P etc. All complete as per the
direction of the Engineer- in- charge.
Ground Floor 211.98 Sqm 130.80 27726.69
First Floor 173.41 Sqm 133.90 23219.41
Second Floor 3.68 Sqm 137.04 504.52
32 PUTTY
ref. from analysis
item no-2 page no-
236
Providing and Finishing wall surface with Acrylic wall
putty (water based) of approved make and finished
smooth & even surface to receive painting including
cost of scaffolding etc. with cost of all materials, labour
T&P etc. complete.
Ground Floor 1945.90 SQM 75.90 147694.06
First Floor 1310.76 SQM 76.80 100666.53
Terrace Floor 75.55 SQM 77.70 5870.24
33 Weather coat
ref. from analysis
item no-20 page
no-99
Painting two coats with Water soluble weather coat
paints of approved shade to the outside walls over a
coat of primer by means of rollers to outside surface of
new walls including all cost of materials, scaffolding,
labour, watering & curing T&P etc complete as per
direction of E-I-C.
Ground Floor 45.8 SQM 119.20 5459.36
First Floor 45.8 SQM 121.10 5546.38
Second Floor 38 SQM 123.00 4674.00
34 ref. from analysis
item no-18 page
no-98
Cement paint
Sign and stamp of EPIL 7 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
Providing and Finishing the wall surface wth water
proofing Cement paint two coats of approved shade on
new work to give an even shade etc, including all cost
of materials, scaffolding, labour, watering & curing T&P
etc complete as per direction of E-I-C.
Ground Floor 1031.40 Sqm 67.70 69826.01
First Floor 928.94 Sqm 69.00 64097.07
Second Floor 774.38 Sqm 70.40 54516.33
35 ref. from analysis
item no-7 page no-
46
Plinth protection
Making plinth protection 100mm thick of cement
concrete 1:2:4( 1 cement: 2 coarse sand: 4 graded
stone aggregate) 12 mm well rammed including
finishing the top smooth. 12.04 Cum 4845.39 58315.13
36 ref. from analysis
item no-22 page no-
99
Distemper
Finishing the wall surface wth water proofing Cement
paint two coats of approved shade on new work to give
an even shade etc, including all cost of materials,
scaffolding, labour, watering & curing T&P etc complete
as per direction of E-I-C.
Ground Floor 3610.55 Sqm 45.00 162474.76
First Floor 3000.96 Sqm 46.00 138044.23
Second Floor 181.96 Sqm 46.90 8533.91
TOTAL CIVIL WORK 20482164.20
SAY 20482164
PLUMBING WORK
Sl. No Item of Works Qnty. Unit Rate (In Rs.) Amount (Rs.)
1 Providing all materials, labour, T&P for laying/fixing of following
dia CPVC pipes S.D.R-11 as per IS-15778 with ISI mark
including fixing of required size CPVC fittings like bend, Tee,
elbow, offsets etc. and the same fixed on wall or floor with holder
bat clamps screw in all floor or laying in trenches including
excavation of earth work in all kinds of soil & backfilling the
trenches as per specification & testing the joints with required water
presure.The cost inclusive of all taxes,duties,transportation
scaffolding etc. as per specification and direction of Engineer-in-
charge.
a) MR 20mm dia 343.20 Mtr. 186.70 64,075.44
b) MR 25mm dia 132.80 Mtr. 252.20 33,492.16
c) MR 32mm dia 95.50 Mtr. 371.70 35,497.35
d) MR 40mm dia 82.00 Mtr. 504.40 41,360.80
e) MR 50mm dia 98.80 Mtr. 783.10 77,370.28
2
MR
Providing all materials, labour, T&P for laying/ fixing of following
dia CPVC pipes Sch-80 as per ASTM-F-441 including fixing of
required size CPVC fittings like bend, Tee, elbow, offsets etc. and
the same fixed on wall or floor with holder bat clamps screw in all
floors or laying in trenches including excavation of earth work in all
kinds of soil & backfilling the trenches as per specification &
testing the joints with required water presure.The cost inclusive of
all taxes, duties, transportation, scaffolding etc. as per specification
and direction of Engineer-in-charge.
a) MR 65mm dia 25.00 Mtr. 565.10 14,127.50
Internal Water Supply & Sanitary Installation.
Sign and stamp of EPIL 8 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
3 Providing all materials, labour, T&P for laying/fixing of following
dia uPVC pipes as per IS-4985 with ISI mark of 6 kgf/cm2
including fixing of required size uPVC fittings
like,bend,Tee,elbow,offsets,etc. and the same fixed on wall or floor
with holder bat clamps screw in all floors or laying in trenches
including excavation of earth work in all kinds of soil & backfilling
the trenches as per specification & testing the joints with required
water presure.The cost inclusive of all taxes, duties, transportation,
scaffolding etc. as per specification and direction of Engineer-in-
charge.
a) MR 40mm dia 25.00 Mtr. 42.50 1,062.50
b) MR 50mm dia 25.00 Mtr. 56.30 1,407.50
4 Providing all materials, labour, T&P for fitting & fixing of following
water supply fittings confirming to IS-15778 with ISI mark as per
ASTM D-2846 & fixing with the pipes after cutting the pipes to
required shape & size including wastage etc. of following nominal
diameter, all complete including testing the joints with required
water pressure.The cost inclusive of all taxes,duties,transportation
scaffolding etc. all complete as per specification and direction of
Engineer-in-charge.
a) MR 25mm dia CPVC ball valve 47.00 No. 612.80 28,801.60
b) MR 32mm dia CPVC ball valve 28.00 No. 1149.00 32,172.00
c) MR 40mm dia CPVC ball valve 19.00 No. 1734.20 32,949.80
5 Providing all materials labour, T&P for making grooves in
bricks/stone masonary walls vertically or horizontally up to
required depth and width in all floor for laying of pipes and fittings
up to 50mm dia, testing the joints with required water pressure and
making good the damages with cement concrete 1:2:4 with 12mm
size h.g.c.b.chips and finished smooth with cement morter (1:4) to
original shape including cost of materials, curing, conveyance, taxes
of all materials etc. all complete as per specification & direction of
EIC.
887.98 Mtr. 143.50 127,425.55
6 Providing all labour,T&P for cutting holes in bricks or stone
masonry wall for taking pipes and making good the damages with
cement concrete 1:2:4 finished smooth with CP 1:4 to original
shape including cost of all materials, curing, conveyance, taxes,
duties etc. all complete as per specification & direction of Engineer-
in-charge.
a) MR For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick wall 148.00 No. 34.80 5,150.40
b) MR For 75mm to 150mm dia pipe to pass in 250mm thick wall 77.00 No. 147.70 11,372.90
7 Providing all labour,T&P and cutting holes in RCC chajja/roof/floor
for taking pipes through and making good the damages with supply
of all required materials etc. complete as per the direction of the
Engineer-in-charge.
27.00 No. 114.30 3,086.10
8 Providing all materials, labour & T&P for fitting and fixing of white
glazed vitreous china water closet Indian Pan (450mmx350mm) of
approved make as per IS-2556 with ISI mark fixing on the floor
with 32mm PVC Long flush bend and cement concrete 1:2:4 for
fitting the closet etc. all respect in all floors including cost,
conveyance and taxes of all materials etc. all complete as per
specification and as per direction of EIC.
a) MR Indian Pan (450mmx350mm) 38.00 No. 2013.90 76,528.20
9 Providing all materials, labour, and T&P for fitting and fixing of
PVC low level cistern complete with all internal fittings of approved
make as per IS-7231 with ISI mark in all floor and providing of
necessary PVC wall plug, screws and 15mm dia PVC water
connecting pipe with union at both end including testing etc. all
complete as per specification & direction of Engineer-in-charge.
a) MR PVC low level Cistern 38.00 No. 1159.40 44,057.20
Sign and stamp of EPIL 9 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
10 Providing all materials, labour, and T&P for fitting and fixing of
white glazed vitreous china water closet Squirting Pan
(450mmx350mm) of approved make as per IS-2556 with ISI mark
fixing on the floor with 32mm PVC Long flush bend and cement
concrete 1:2:4 for fitting the closet etc. All respect in all floors
including cost, conveyance and taxes of all materials etc. all
complete as per specification and as per direction of EIC.
a) MR Squirting Pan (450mmx350mm) 12.00 No. 2013.90 24,166.80
11 Providing all materials, labour, T&P for fitting and fixing of white
glazed vitreous china water closet (European pattern) 'P' or 'S' type
with cistern & seat cover, wash hand basin of size 460mmx360mm
with one pair basin bolt, one no. hinged rail 760mm long & 4 nos.
grab rails 600mm long including supply of sutaible PVC wall plug
and Brass screws etc. suitable for handicapped toilets in all floor
etc. all complete including cost, taxes and conveyance as per
specification all complete as per direction of Engineer-in-charge.
1.00 Set 81226.40 81,226.40
12 Supply all materials and labour for fitting and fixing of following
size white glazed vitreous china wash hand basin of approved
make in all floor with supply & fixing of basin bolts & Nut of
approved quality including cutting the walls & floor and making
good the damages including testing with all taxes, duties,
transportation etc. all complete as per specification & direction of
EIC.
a) MR 630x450mm size WHB 30.00 Set 2076.50 62,295.00
13 Supply all materials, labour & T&P for fitting and fixing of
following sizes of white glazed vitreous china flat back, lipped front
urinal basin confirming to specification of approved make as per IS-
2556 with ISI mark in all floor along with supply & fixing of
necessary component parts like pair of C.I./M.S. bracket including
connection from existing water supply pipe line & testing the same
with all taxes, duties, transportation etc. all complete as per
specification & direction of the Engineer-in-charge.
a) MR 420x395x635mm size flat back large standing urinal 14.00 Set 3166.60 44,332.40
14 Providing all materials, labour, T&P for fixing of following sizes of
bevelled edge mirror of 5mm thick mounted on 4mm thick AC sheet
& CP cup screw with PVC wall plugs in all floor including cost,
conveyance, taxes of all materials complete as per specification and
direction of E.I.C.a) MR 600mm x 450mm size 17.00 No. 632.80 10,757.60
15 Providing all materials, labour,T&P and fittings and fixing of
different water supply (CP on Brass) fitting (Quarter Turn) as per
IS specification & approved make in all floor of following sizes and
specification with leak proof threaded joints with thread seal tape or
any other method as required and directed including all taxes,
duties, transportation etc., testing and rectification of defects after
testing complete as per direction of Engineer-in-charge.
a) MR 15mm dia Short Body Bibcock with wall flange 44.00 No. 977.90 43,027.60
b) MR 15mm dia Angle Stop cock with wall flange 105.0000 No. 705.10 74,035.50
c) MR 15mm dia Pillar cock 32.0000 No. 1013.70 32,438.40
d) MR Single Lever Basin Mixer without Pop-up waste 32.0000 No. 2255.60 72,179.20
e) MR Angle Cock Auto closing system for urinal with CP connection pipe 32.0000 No. 1595.50 51,056.00
f) MR O.H. Shower of Square shape of size 150mmx150mm with Shower
Arm 20mm dia x 450mm long & Wall Flange.
5.0000 No. 1150.00 5,750.00
g) MR C.P. Soap Dish Holder 5.0000 No. 481.70 2,408.50
h) MR Towel Ring Square with round flange 5.0000 No. 656.00 3,280.00
i) MR CP Towel Rail of 600mm long 5.0000 No. 970.00 4,850.00
j) MR 600mm long Glass Self 5.0000 No. 905.10 4,525.50
k) MR Single lever High flow Divertor with Button assembly & exposed
parts kit consisting of operating lever, wall flange (with seals) &
Button.
5.0000 Nos. 3350.00 16,750.00
l) MR Bath Spout with wall flange 5.0000 Nos. 1007.00 5,035.00
m) MR Health Faucet with 1.00m long PVC tube & wall hook 5.0000 No. 763.90 3,819.50
n) MR 15mm dia sink cock with swivel casted spout (Wall mounted 6.0000 No. 1091.60 6,549.60
o) MR 32mm dia C.P.waste (Half Threaded) 41.0000 No. 317.50 13,017.50
p) MR 32mm dia C.P. Doom Waste 9.0000 No. 377.00 3,393.00
q) MR C.P. Toilet paper holder with flap 5.0000 No. 820.30 4,101.50
r) MR C.P. Robe Hook 5.0000 No. 425.20 2,126.00
s) MR 150mmx150mm size stainless steel hinged grating 38.00 No. 354.50 13,471.00
Sign and stamp of EPIL 10 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
t) MR 15mmx50mm C.P. Extension piece 32.00 No. 166.60 5,331.20
u) MR 15mm CP Spreader 14.00 No. 519.00 7,266.00
16 Supply all materials, labour, T&P, fitting and fixing of uPVC SWR
(Ringfit) Pipes (Type-A) of approved make confirming to IS-
13592/1992 with ISI mark, both below & above ground level or
fixing on wall surface in all floors including excavation of earth
work in all kinds of soil & necessary back filling or required
scaffolding with all taxes, duties, transportation including testing
etc. all complete as per specification & direction of the EIC.
a) MR 110mm dia pipe 177.00 Mtr. 220.40 39,010.80
b) MR 75mm dia pipe 43.00 Mtr. 135.80 5,839.40
17 Supplying all materials, labour, T&P, fitting and fixing of following
dia uPVC SWR (Ringfit) fittings of approved make confirming to
IS-14735 with ISI mark with all taxes, duties, transportation &
requisite testing as per specification & direction of EIC.
a) MR 125mm x110mm P-Trap with lip ring 61.0000 No. 434.80 26,522.80
b) MR 110mmx110mm 'P' Trap 26.0000 No. 243.00 6,318.00
c) MR 110mmx75mm Nahani Trap 54.0000 No. 148.10 7,997.40
d) MR 110mm Multifloor Trap 198.0000 No. 156.60 31,006.80
e) MR 110mmx87.5º Plane bend 90.0000 No. 130.90 11,781.00
f) MR 110mmx87.5º door bend 82.0000 No. 150.20 12,316.40
g) MR 110mmx45º Plane Bend 56.0000 No. 122.30 6,848.80
h) MR 110mm Single Tee with Door 120.0000 No. 208.70 25,044.00
i) MR 110mm Double Tee with Door 54.0000 No. 411.20 22,204.80
j) MR 110mm dia single 'Y' 56.0000 No. 224.80 12,588.80
k) MR 110mm WC connector/Bend with lip ring 94.0000 Nos. 181.30 17,042.20
l) MR 110x75mm Reducer 70.0000 Nos. 107.30 7,511.00
m) MR 110mm dia Vent cowl 68.0000 Nos. 48.70 3,311.60
n) MR PVC Clamp Suitable for 110mm dia pipe 365.00 Nos. 72.80 26,572.00
18 Providing all materials, labour, T&P for fitting and fixing of
following size of 12mm thick toughened glass for urinal partition of
approved make in all floor with edge moulding & polishing with
chromium plated brass screws, G/W brackets 90° (Double Sided
Back Plate) of DORMA make with all taxes, duties, transportation
etc. all complete as per specification & direction of Engineer-in-
charge.
a) MR Toughened glass partition of Size-1200mm ht. x 600mm width for
Urinal Partition
6.00 No. 8334.00 50,004.00
19 Providing all materials, labour, T&P for fitting & fixing of following
sizes of Stainless Steel Kitchen Sink made out of 0.8mm thick sheet
with coupling & strainer, the flat boards for correct sandwitch
between the platform top & granite/marble slab & making good the
damages, fixing of 32mm dia PVC waste pipe etc. including
testing, commissing all complete as per specification & direction of
the Engineer-in-Charge.a) MR Stainless Steel Kitchen Sink of overal size-535 x 460 x 200mm . )
of popular range, satin.
6.00 No. 5115.40 30,692.40
20 Providing, fitting, fixing including testing & commissioning of
following capacity polyethylene moulded water storage cylindrical
tank with lid & locking arrangement as per IS-12701/1996 with ISI
mark including cutting holes of required size & shape. Providing,
fitting and fixing of CPVC water tank connector / Adaptor with jam
nut etc. for filling, delivery, overflow & wash out arrangements,
including hoisting upto a height of 10 mtr. above the ground level
& placing the tank of required position including construction of
brick masonry pedestal up to 450mm ht. from roof with RCC
(M-20) base slab, beam of approved design & 125mm thick brick
masonry wall up to 2/3 ht.of tank (all round) in C.M. 1:4, 12mm
C.P. 1:4 over brick work etc. all complete as per specification &
direction of EIC.
a) MR 5000 Ltr. capacity 3.00 No. 57830.00 173,490.00
Sign and stamp of EPIL 11 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
Providing, fitting, fixing including testing & commissioning of
following capacity polyethylene moulded water storage cylindrical
tank with lid & locking arrangement as per IS-12701/1996 with ISI
mark including cutting holes of required size & shape. Providing,
fitting and fixing of CPVC water tank connector / Adaptor with jam
nut etc. for filling, delivery, overflow & wash out arrangements,
including hoisting upto a height of 10 mtr. above the ground level
& placing the tank of required position including construction of
brick masonry pedestal up to 450mm ht. from roof with RCC
(M-20) base slab, beam of approved design & 125mm thick brick
masonry wall up to 2/3 ht.of tank (all round) in C.M. 1:4, 12mm
C.P. 1:4 over brick work etc. all complete as per specification &
direction of EIC.
MR 500 Ltr. capacity 2.00 Nos. 24728.00 49,456.00
Providing all materials, labour, T&P for fitting & fixing of storage
water heater of following capacity & fixed on the wall with bolt &
nut after drilling of suitable bolt holes including supply of clamp,
bolt, washer, wall plug etc. suitable for the water heater. The cost
inclusive of all taxes, duties, transportation, scaffolding etc. all
complete as per specification & direction of EIC.
25 ltr. Capacity 5 star rating Water Heater 2.00 Nos. 8381.00 16,762.00
21 AR Providing all material, labour, T&P and construction of Gully Trap
chamber of size as mentioned below with 250mm nominal size
flyash Brick having crushing strength not less than 75kg/ sqcm in
CM 1:4 over a bed of 100mm thick C.C. (1:3:6) using 40mm size
HG metal, plastering with 12mm thick cement plaster with cement
punning in cement mortar 1:4 on inner surface and 12mm thick
cement plaster in cement mortar (1:4) on external surface,fitting &
fixing of PVC Gully Trap and pre-cast factory made (SFRC) cover
with frame of opening size 260mmx260mm, moulding and shaping
the channel & benching with C.C (1:2:4) with hard granite chips
12mm size, earth work excavation in all kinds of soil & rock and
filling the cavity of the chamber with excavated & selected earth
levelling the surface around the chamber with disposal of surplus
earth within 50mt lead as per specification, design & drawing
including cost of curing and all taxes, royalty, cost, conveyance etc.
all complete as per specification & direction of EIC.
a) Inner size 300mmx300mmx450mm depth Gully Trap chamber 35.00 No. 1783.00 62,405.00
22 MR Providing all materials required for construction of inspection
chamber with Fly Ash bricks of size 25cm x 12cm x 8cm having
crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6
with 40mm size hard granite crusher broken metal of 100mm thick,
12mm thick cement plaster 1:3 both in outer & inner surface of the
wall & bottom, earth work excavation in all kinds of soil/rock
including back filling with selected excavated earth duly watered &
rammed. RCC M-20 with 20mm & down size H.G crusher broken
chips having minimum cube strength 200Kg/Sqcm at 28 days
confirming to IS-453/76 & IS-3370 for roof slab of 125mm average
thick with form work as per the requied size including cost for MS
reinforcement as per approved design & drawing & fixing of Pre-
cast factory made manhole cover with frame (SFRC medium duty)
for opening of 500mm including cost of all materials, labour, T&P
etc. complete as per specification & direction of Engineer-in-
charge.
a) Inner size 750mm x 750mm x 500mm depth 8.00 No. 8974.00 71,792.00
Total 1,943,643.68
Say 1,943,644.00
1 Earth work :
a)
Ref. from analysis
item no-1,2,3 page
no-1,2,4
Earth work in all kinds of soil within 50m initial lead & 1.5m initial
lift including dressing, levelling & breaking clods to maximum 5cm
to 7cm & laying in layers not exceeding 0.3m in depth & as per
specification & direction of Department.
45.00 Cum. 138.40 6,228.00
External Sewerage Disposal System.
Sign and stamp of EPIL 12 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
b)
AR
Filling foundation trenches and Plinth with excavated & selected
earth, laying in layers not exceeding 23cm thick well watered &
rammed etc. complete including labour , T&P, lead & lift cost &
conveyance, loading, unloading etc. complete as per specification &
direction of EIC.
43.00 Cum. 76.90 3,306.70
2
Ref. from analysis
item no-7 page no-
46
Providing all materials,labour,T&P for construction of Cement
Concrete (1:2:4) Pedestal with 12mm size h.g.c.b. chips as per
approved design & drawing for uPVC pipe. The cost inclusive of all
taxes, royality, hire & running charges of all machineries,
Transportation charges with all consumables etc. all complete as per
specification & direction of EIC.a) MR For 160mm dia pipe:- 51.00 Nos. 979.00 49,929.00
b) MR For 110mm dia pipe:- 26.00 Nos. 700.00 18,200.00
3 Providing all materials, labour, T&P and laying of uPVC in standard
lengths suitable for push on joints including lowering the pipes in to
trenches to required depth below G.L, with proper allignment &
gradient, testing, commissioning, de-watering (if required) including
all taxes & duties etc. all complete as per specification & direction
of EIC. (Excluding cost for earth wok, back filling which will be
paid separately).a) MR For 160mm dia pipe:- 53.00 Mtr. 458.20 24,284.60
b) MR For 110mm dia pipe:- 27.20 Mtr. 220.40 5,994.88
4 Providing all materials, labour, T&P required for construction of
RCC M-25 man hole chamber of following sizes having cube
strength 250 Kg/cm2
at 28 days confirming to IS-456/2000 & IS-
3370 at all locations & height using h.g. stone aggregate (Crusher
broken) of 20mm & down size including machine mixing, lifting,
hoisting, conveying, placing in position, mechanical consolidation,
curing, de-watering (if required). The minimum thickness of RCC
base slab, all side walls & roof slab shall be not less than 150mm,
150mm & 125mm (avg.) respectively. The cost shall be inclusive of
rigid, levelled & plumbed centering & shuttering to required slope,
allignment & size for all kinds of RCC work with steel/ ply
centering materials with all bracing, ties, anchorage & supports and
removing the same after required paid & placing
M.S.Reinforcement HYSD bar of required dia including cutting,
bending, straightening of approved quality as per approved design
& drawing & tying the grills for RCC works & placing in position
using binding wires (18 to 20 gauge soft drawn & cold annealed).
PCC 1:3:6 with 40mm size h.g.c.b. metal of 100mm thick, moulding
& shaping the channel & benching with C.C. 1:2:4 with 12mm size
h.g.c.b. chips, 12mm thick cement plaster 1:3 with cement punning
on inner wall surface, earth work excavation in all types of soil/rock
including cement concrete cutting as per site condition, filling the
foundation base with sand duly watered & rammed, providing,
fitting & fixing of pre-cast factory made man hole cover with frame
(SFRC heavy duty) for clear opening 560mm dia, providing, fitting
& fixing of poly propylene steel reinforced man hole steps of
approved quality & size in two parallel line of 300mm spacing in
vertical wall with centre to centre 375mm (staggered) etc.all
complete as per specification & direction of EIC.
a) AR Manhole chamber of Inner size 800mmx900mmx 900mm depth. 11.00 Nos. 19360.00 212,960.00
b) AR Extra for every additional depth of 0.10mtr. or part there of manhole
size 800mmx900mm from 900mm depth upto 1500mm depth.
4.11 Mtr. 10767.00 44,301.50
Total:- 365,204.68
Say :- 365,205.00
Sign and stamp of EPIL 13 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
Sl. No Item of Works Qnty. Unit Rate (In Rs.) Amount (In Rs.)
1 Earth Work:
a)
Ref. from analysis
item no-1,2,3 page
no-1,2,4
Earth work in all kinds of soil within 50m initial lead & 1.5m initial
lift including dressing, levelling & breaking clods to maximum 5cm
to 7cm & laying in layers not exceeding 0.3m in depth & as per
specification & direction of Department.
i) Upto 1.50m initial lift 62.00 Cum. 138.40 8,580.80
ii) From 1.50m to 3.00m lift 52.40 Cum. 148.60 7,786.64
b)
AR
Filling foundation trenches and Plinth with excavated & selected
earth, laying in layers not exceeding 23cm thick well watered &
rammed etc. complete including labour , T&P, lead & lift cost &
conveyance, loading, unloading etc. complete as per specification &
direction of EIC.
52.40 Cum 76.90 4,029.56
2
ref. from analysis
item no-15 page
no-8
Filling the pipe line trenches with sand including watering &
ramming etc. complete including all labour, T&P, cost of sand,
conveyance, taxes, royality, loading & unloading as per
specification & direction of EIC.
2.20 Cum 271.00 596.20
3
ref. from analysis
item no-3 page
no-43
Providing and laying plain cement concrete (1:3:6) in foundation
and bottom layers using 40mm size hard black crusher broken
granite metal of approved quality and size from approved quarry
including cost, conveyance, royality, all taxes complete and
providing all labour T&P for machine mixing, lowering, laying and
compacting to proper thickness, watering and curing for the
required period and including dewatering (if required) as per the
specification & direction of Engineer-in-charge.
4.40 Cum 4509.00 19,839.60
4
ref. from analysis
item no-1 (d)
page no-260
Providing all materials, labour, T&P for laying R.C.C. M-30
having minimum cube strength of 300 Kg/cm2
at 28 days confirming
to IS 456/79 & IS 3370 for water tank at all location & height using
graded H.G stone aggregate of 20mm & down size including
machine mixing, lifting, conveying, placing in position mechanical
consolidation curing, dewatering (if necessary) & testing the
concrete for water tightness, rectification of defects if any etc.,
complete all as per specification & drawing including cost of all
material, labour, machinery hire charges, T&P and all testing
charges (but excluding cost of reinforcement bars, binding wirings,
centering & shuttering etc.) as per the specification & direction of
Engineer-in-charge.
25.46 Cum 5443.50 138,568.25
5
ref. from analysis
item no-10 page
no-53
Providing & making strong, rigid, levelled & plumbed centering &
shuttering to required shape, allignment & size for all kinds of RCC
works with wooden or steel centering materials with all bracing,
ties, anchorage & supports including provision for necessary holes
for P.H. works including cost of nails etc. complete & dismantling
& removing the same after required interval from the date of casting
including cost of all materials with transportation, hire charges,
taxes, loading, unloading all labour, T&P, sundries etc. complete as
per the specification & direction of the Engineer-in-charge.
197.20 Sqm 331.10 65,292.92
6 ref. from analysis item
no-9.A page no-52
Cutting, bending, binding, straightening HYSD bars of required
diameter of approved quality as per approved design & drawing &
tying the grill for RCC works & placing in position using binding
wire (18 to 20 gauge, soft drawn & cold annealed) including cost of
all labour, material, sundries, T&P, scaffolding etc. all complete as
per the specification & the direction of Engineer-in-charge.
24.20 Qntl 5542.80 134,135.76
liquid depth of 2 year cleaning interval.
RCC Septic Tank of inner size 5.00x1.60x1.40m
Sign and stamp of EPIL 14 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
7
ref. from analysis
item no-29 page
no-110
Providing plaster with cement mortar including cement punning/
bitumen painting where required finished smooth over brick work
with waterproofing cement based compound of approved quality
including finishing smooth to proper slope and plane including cost
of all materials with conveyance, royalty, taxes, watering,
scaffolding and curing, all labour and T&P etc. complete as per
specification & direction of EIC.
a) 12mm thick C.P. 1:3 with punning 90.20 Sqm 151.80 13,692.36
8
ref. from analysis
item no-10 page
no-53
Providing and laying Cement concrete(1:2:4) for A.S. Flooring of
25mm average thick using graded hard granite stone aggregate of
12mm size of approved quality and from approved quarry, laid to
level and slopes, including finishing smooth or checkered with
floating coat of cement punning, watering and curing etc. complete
as per drawings specification and direction of Engineer-in-charge.
20.40 Sqm 243.40 4,965.36
9
ref. from analysis
item no-7 page
no-44
Providing and laying cement concrete (1:2:4) in foundation and
bottom layers using 12mm size hard black crusher broken granite
chips of approved quality and size from approved quarry including
cost, conveyance, royality, all taxes complete and providing all
labour T&P for machine mixing, lowering, laying and compacting to
proper thickness, watering and curing for the required period and
including dewatering (if required) as per the specification &
direction of Engineer-in-charge.
0.60 Cum 5680.30 3,408.18
10 Providing, fitting & fixing of following sizes of precast factory
made RCC man hole cover with frame including locking
arrangement. The cost inclusive of all labour, T&P, taxes,
transportation etc. all complete as per specification & direction of
EIC.
a) 500mm dia clear opening RCC man hole cover with frame.(medium
duty)
6.00 No. 1263.00 7,578.00
11 Providing, fitting & fixing of Poly Propylene man hole steps of
approved quality & size in two parallel line of 300mm spacing in
vertical walls with centre to centre 375mm (staggered).The cost
inclusive of all labour, T&P, taxes, transportation etc. all complete
as per specification & direction of EIC.
40.00 No. 269.00 10,760.00
12 Providing, fitting & fixing of 110 diax1.80m long UPVC SWR pipe
(Type-A) of approved make confirming to IS-13592/1992 with Vent
Cowl including construction of cement concrete pedestal (1:2:4) of
size 0.30mx0.30mx0.45m ht. The cost inclusive of all labour, T&P,
taxes, transportation etc. all complete as per specification &
direction of EIC.
2.00 No. 590.00 1,180.00
13 Providing, fitting & fixing of 150mm dia S.W. Tee. The cost
inclusive of all labour, T&P, taxes, transportation etc. all complete
as per specification & direction of EIC.
4.00 No. 500.00 2,000.00
14 Providing all labour, T&P for benching & making Channel for inlet
& outlet chamber.
2.00 Job 97.90 195.80
Total :- 422,609.43
Say:- 422,609.00
Sl. No Item of Works Qnty. Unit Rate (In Rs.) Amount (In Rs.)
1 Earth Work:
a) Ref. from analysis item
no-1,2,3 page no-1,2,4
Earth work in all kinds of soil within 50m initial lead & 1.5m initial
lift including dressing, levelling & breaking clods to maximum 5cm
to 7cm & laying in layers not exceeding 0.3m in depth & as per
specification & direction of Department.i) Upto 1.50m initial lift 15.93 Cum. 138.40 2,204.40
ii) From 1.50m to 3.00m lift 15.20 Cum. 148.60 2,258.72
b) AR Filling foundation trenches and Plinth with excavated & selected
earth, laying in layers not exceeding 23cm thick well watered &
rammed etc. complete including labour , T&P, lead & lift cost &
conveyance, loading, unloading etc. complete as per specification &
direction of EIC.
6.00 Cum 76.90 461.40
Soak Pit of Inner Dia 1.50m & depth 3.00m
Sign and stamp of EPIL 15 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
c) AR Providing all material, labour & T&P for filling the both inner &
outer surface of soak pit with 40mm size hard granite hand broken
metal etc. complete including lead & lift cost & conveyance,
loading, unloading etc. complete as per specification & direction of
EIC.
15.20 Cum 2132.30 32,410.96
2
ref. from analysis
item no-15 page
no-8
Filling the foundation trenches with sand including watering &
ramming etc. complete including all labour, T&P, cost of sand,
conveyance, taxes, royality, loading & unloading as per
specification & direction of EIC.
0.20 Cum 271.00 54.20
3
ref. from analysis
item no-3 page
no-43
Providing and laying plain cement concrete (1:3:6) in foundation
and bottom layers using 40mm size hard black crusher broken
granite metal of approved quality and size from approved quarry
including cost, conveyance, royality, all taxes complete and
providing all labour T&P for machine mixing, lowering, laying and
compacting to proper thickness, watering and curing for the
required period and including dewatering (if required) as per the
specification & direction of Engineer-in-charge.
0.40 Cum 4509.00 1,803.60
4
ref. from analysis
item no-2 page
no-71
Providing all material, labour, T&P for Fly ash Brick masonry work
using Fly ash of 25cm X 12 cm X 8 cm size having crushing
strength not less than 75Kg/Sqcm. in cement mortar (1:4) including
cost, conveyance, taxes, royalties, loading and unloading of all
materials and labour and scaffolding, watering, curing T&P etc.,
complete as per the specification & direction of the Engineer-in-
charge. a) Foundation & Plinth 3.00 Cum 3831.80 11,495.40
5 ref. from analysis
item no-9A page no-
52
Providing all material, labour, T&P for using Dry Fly ash Brick of
25cm X 12 cm X 8 cm size having crushing strength not less than
75Kg/Sqcm. including cost, conveyance, taxes, royalties, loading
and unloading of all materials and labour and scaffolding, watering,
curing T&P etc., complete as per the specification & direction of
the Engineer-in-charge. a) Foundation & Plinth 3.80 Cum 2972.50 11,295.50
6 Providing all materials, labour, T&P for laying R.C.C. M-20
having minimum cube strength of 200 Kg/cm2 at 28 days
confirming to IS 456/79 & IS 3370 for water tank at all location &
height using graded H.G stone aggregate of 20mm & down size
including machine mixing, lifting, conveying, placing in position
mechanical consolidation curing, dewatering (if necessary) &
testing the concrete for water tightness, rectification of defects if
any etc., complete all as per specification & drawing including cost
of all material, labour, machinery hire charges, T&P and all testing
charges (but excluding cost of reinforcement bars, binding wirings,
centering & shuttering etc.) as per the specification & direction of
Engineer-in-charge.
0.60 Cum 5067.70 3,040.62
7 Providing & making strong, rigid, levelled & plumbed centering &
shuttering to required shape, allignment & size for all kinds of RCC
works with wooden or steel centering materials with all bracing,
ties, anchorage & supports including provision for necessary holes
for P.H. works including cost of nails etc. complete & dismantling
& removing the same after required interval from the date of casting
including cost of all materials with transportation, hire charges,
taxes, loading, unloading all labour, T&P, sundries etc. complete as
per the specification & direction of the Engineer-in-charge.
4.00 Sqm 331.10 1,324.40
8 Cutting, bending, binding, straightening HYSD bars of required
diameter of approved quality as per approved design & drawing &
tying the grill for RCC works & placing in position using binding
wire (18 to 20 gauge, soft drawn & cold annealed) including cost of
all labour, material, sundries, T&P, scaffolding etc. all complete as
per the specification & the direction of Engineer-in-charge.
0.60 Qntl 5542.80 3,325.68
9 Providing plaster with cement mortar including cement punning/
bitumen painting where required finished smooth over brick work
with waterproofing cement based compound of approved quality
including finishing smooth to proper slope and plane including cost
of all materials with conveyance, royalty, taxes, watering,
scaffolding and curing, all labour and T&P etc. complete as per
specification & direction of EIC.
Sign and stamp of EPIL 16 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
a)ref. from analysis
item no-3 page no-
102
12mm thick C.P. 1:4 14.00 Sqm 116.10 1,625.40
b) ref. from analysis
item no-16 page no-
106
12mm thick C.P. 1:4 with punning 10.40 Sqm 138.60 1441.44
c) ref. from analysis
item no-7 page no-
103
12mm thick C.P. 1:4 with punning and bitumen painting over
wall top.
2.40 Sqm 158.30 379.92
10 Providing, fitting & fixing of following sizes of precast factory
made RCC man hole cover with frame including locking
arrangement. The cost inclusive of all labour, T&P, taxes,
transportation etc. all complete as per specification & direction of
EIC.a) AR 500mm dia clear opening RCC man hole cover with frame.(Medium
duty)
2.00 No. 1263.00 2,526.00
Total :- 75,647.64
Say:- 75,648.00
Grand Total 2,807,106.00
SAY 2,807,106.00
Serial No Description of Items Qnty UNIT Unit Rate Total Amount
INTERNAL WIRING.
1 MR
Recessed wiring to light point / first light of group control/ call
bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR
PVC insulated single core multistrand copper conductor of ISI
marked in 20 mm dia non-metalic PVC conduit with 6 Amp,
250 V clip in type switch ISI marked and ceiling rose ISI
marked mounted on G.I modular box with face plate & cover
of suitable size , with 1.5 sq.mm FR PVC insulated single
core multistrand copper conductor as earth wire including all
accesories and connection as per direction of Engineer in
Charge.
SCHOOL 287 Nos. 670.00 192290.00
2 MR
Recessed wiring to secondary light point looped from primary
light point with 1.5sqmm FR PVC insulated single core
multistrand copper conductor of ISI marked with 20mm dia
non-metallic PVC conduit with 1.5sqmm FR PVC insulated
single core multistrand copper conductor for running earth
including 3 plate ISI marked Ceiling rose with all accessories
& connection as per direction of Engineer in charge.
Average Length: 3 mtr
SCHOOL 82 Nos. 354.00 29028.00
3 MR
Recessed wiring to ceiling fan point with 1.5sqmm FR PVC
insulated single core multistrand copper conductor of ISI
marked with 20mm dia non-metallic PVC conduit with 6Amp
250V Modular Switch,Stepped type Moudular Regulator,
Base & Cover with 1.5sqmm FR PVC insulated single core
multistrand copper conductor for running earth including all
accessories & connection as per direction of Engineer in
charge. (Make of wire: finolex/ Anchor/ Havels/L&T/KDK)
Group B
SCHOOL 110 Nos. 1155.00 127050.00
4 MR
Recessed wiring to Twin control light point with 1.5 sq.mm
FR PVC insulated single core multistrand copper conductor
of ISI marked in 20 mm dia non-metalic PVC conduit with
6Amp, 250 V clip in type 2way switch ISI marked and ceiling
rose ISI marked mounted on G.I modular box with face plate
& cover of suitable size , with 1.5 sq.mm FR PVC insulated
single core multistrand copper conductor as earth wire
including all accesories and connection as per direction of
Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor /
Havels / V Guard )Group C
SCHOOL 9 Nos 1058.00 9522.00
5 MR
Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250
V clip in type modular switch ISI marked mounted on G.I
moular box with face plate & cover of suitable size including
all accesories and connection on same switch board as per
direction of Engineer in Charge.
SCHOOL 32 Nos. 573.00 18336.00
ELECTRICAL WORKS
Sign and stamp of EPIL 17 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
6 MR
Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5
sq.mm FR PVC insulated single core multistrand copper
conductor of ISI marked in 20 mm dia non-metalic PVC
conduit with 6Amp, 250 V clip in type switch ISI marked
mounted on G.I moular box with face plate & cover of suitable
size , with 1.5 sq.mm FR PVC insulated single core
multistrand copper conductor as earth wire including all
accesories and connection on separate board as per direction
of Engineer in Charge.
SCHOOL 110 Nos. 879.00 96690.00
7 MR
Recessed wiring for 2 x 6 amp socket outlet controlled by 2
nos 6Amp, 250 V clip in type switch ISI marked mounted on
single G.I moular box with face plate & cover of suitable size
including all accesories and connection on separate board as
per direction of Engineer in Charge.
SCHOOL 23 Nos. 870.00 20010.00
8 MR
Recessed wiring for 6 pin 16 amp socket outlet with 16Amp,
250 V clip in type switch ISI marked mounted on G.I moular
box with face plate & cover of suitable size including all
accesories and connection as per direction of Engineer in
Charge.
SCHOOL 32 Nos. 750.00 24000.00
9 MR
Recessed wiring for 6 pin 16 amp socket outlet with 5Amp,
250 V clip in type switch ISI marked mounted on G.I moular
box with face plate & cover of suitable size , with 1.5 sq.mm
FR PVC insulated single core multistrand copper conductor
as earth wire including all accesories and connection as per
direction of Engineer in Charge.
SCHOOL 10 Nos. 853.00 8530.00
10 MR
Recessed wiring for A.C/ Power socket outlet with industrial
type socket outlet, plug top and metal chained cover in sheet
steel enclosure ,20A/32A SP MCB including all accesories
and connection as per direction of Engineer in Charge.
SCHOOL 10 Nos. 669.00 6690.00
SUBTOTAL 532146.00
SUBMAIN.
11 MR
Recessed wiring to submain in 4 x 10 sq.mm FR PVC
insulated single core multistrand copper conductor of ISI
marked confirming to IS-694/1990 in 40 mm dia non-metalic
heavy duty PVC conduit 1.6 mm thick along with 2 x 6 sq.mm
FR PVC insulated single core multistrand copper conductor
as earth wire as equired. ( For PDB)
SCHOOL 150.00 Mtrs 575.00 86250.00
12 MR
Recessed wiring to submain in 4 x 6 sq.mm FR PVC
insulated single core multistrand copper conductor of ISI
marked confirming to IS-694/1990 in 32 mm dia non-metalic
heavy duty PVC conduit 1.6 mm thick along with 2 x 4 sq.mm
FR PVC insulated single core multistrand copper conductor
as earth wire as equired. ( For LDB & CDB )
SCHOOL 132.00 Mtrs 354.00 46728.00
B) MR
Recessed wiring to submain in 2 x 6 sq.mm FR PVC
insulated single core multistrand copper conductor of ISI
marked confirming to IS-694/1990 in 25 mm dia non-metalic
heavy duty PVC conduit 1.6 mm thick along with 1 x 4 sq.mm
FR PVC insulated single core multistrand copper conductor
as earth wire as equired. (For DB )
STAFF QUARTERS 39.00 Mtrs 213.00 8307.00
13 MR
Recessed wiring to submain in 2 x 4 sq.mm FR PVC
insulated single core multistrand copper conductor of ISI
marked confirming to IS-694/1990 in 20 mm dia non-metalic
heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5
sq.mm FR PVC insulated single core multistrand copper
conductor as earth wire as equired. (For AC &POWER
SOCKET POINTS )
SCHOOL 1256.00 1256 167.00 209752.00
14 MR
Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC
insulated single core multistrand copper conductor of ISI
marked confirming to IS-694/1990 in 20 mm dia non-metalic
heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5
sq.mm FR PVC insulated single core multistrand copper
conductor as earth wire as equired. (From DB to Switch
Board & 2x5A SOCKET POINTS )
Sign and stamp of EPIL 18 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
SCHOOL 2086.00 Mtrs 135.00 281610.00
15 MR
Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC
insulated single core multistrand copper conductor of ISI
marked confirming to IS-694/1990 in 20 mm dia non-metalic
heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5
sq.mm FR PVC insulated single core multistrand copper
conductor as earth wire as equired. (For Switch Board
Looping )
SCHOOL 1480.00 Mtrs 117.00 173160.00
SUBTOTAL 805807.00
DB.
MR
Supply and fixing of following way three pole and neutral,
sheet steel, MCB distribution, 415 V on surface / recess,
complete with tinned copper bus bar, neutral bus bar, earth
bar, din bar, hinged front acrylic cover for the MCB knobs
detachable gland plate, interconnections, phosphatized and
powder painted including earthing etc. as required wih
necessary MCB , RCCB / ISOLATORS as required.
16
Supply, fixing, erecting, connecting and commissioning of
indoor type dust and vermin proof, sheet steel clad ready
made, double door horizontal type powder coated wall
mounted 4 way TPN Distribution Boards suitable for 440
V, three phase, 4 wire 50 Hz AC Supply complete with
bottom detachable plate for interconnections etc as
below.Incommer 1 No-25A FP RCCB (100mA) Outgoings-6-
32 A SP MCB- 12 Nos, (For GF LDB /CDB,1F LDB/CDB)
SCHOOL 4 Nos. 7262.00 29048.00
17
Supply, fixing, erecting, connecting and commissioning of
indoor type dust and vermin proof, sheet steel clad ready
made, double door horizontal type powder coated wall
mounted 4 way TPN Distribution Boards suitable for 440
V, three phase, 4 wire 50 Hz AC Supply complete with
bottom detachable plate for interconnections etc as
below.Incommer 1 No-40A FP RCCB (100mA) Outgoings-6-
32 A SP MCB- 12 Nos, (For PDB)
0.00
MR SCHOOL 4 Nos. 7273.00 29092.00
MR
Supply, fixing, erecting, connecting and commissioning of
indoor type dust and vermin proof, sheet steel clad ready
made, double door horizontal type powder coated wall
mounted 4 way TPN Distribution Boards suitable for 440 V,
three phase, 4 wire 50 Hz AC Supply complete with bottom
detachable plate for interconnections etc as below.Incommer
1 No-25A FP RCCB (100mA) Outgoings-6-32 A SP MCB-
12 Nos, (For GF LDB)
0.00
BOYS HOSTEL 2 Nos. 7273.00 14546.00
0.00
MR
Supply, fixing, erecting, connecting and commissioning of
indoor type dust and vermin proof, sheet steel clad ready
made, double door horizontal type powder coated wall
mounted 6 way TPN Distribution Boards suitable for 440 V,
three phase, 4 wire 50 Hz AC Supply complete with bottom
detachable plate for interconnections etc as below.Incommer
1 No-40A FP RCCB (100mA) Outgoings-6-32 A SP MCB-
18 Nos,(For 1F L+PDB)
0.00
BOYS HOSTEL 2 Nos. 8459.00 16918.00
MR
Supply, fixing, erecting, connecting and commissioning of
indoor type dust and vermin proof, sheet steel clad ready
made, double door horizontal type powder coated wall
mounted 16 way SPN Distribution Boards suitable for 240 V,
Single phase, 2 wire 50 Hz AC Supply complete with bottom
detachable plate for interconnections etc as below.
Incommer 1 No-40A DP RCCB (100mA) Outgoings-6-32 A
SP MCB-12 Nos
STAFF QUARTERS 2 Nos. 6886.00 13772.00
Sign and stamp of EPIL 19 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
MR
Supply, fixing, erecting, connecting and commissioning of
indoor type dust and vermin proof, sheet steel clad ready
made, double door horizontal type powder coated wall
mounted 8 way SPN Distribution Boards suitable for 240 V,
Single phase, 2 wire 50 Hz AC Supply complete with bottom
detachable plate for interconnections etc as below.
Incommer 1 No-25A DP RCCB (100mA) Outgoings-6-32 A
SP MCB-6 Nos
STAFF QUARTERS 1 Nos. 4193.00 4193.00
SUBTOTAL 107569.00
PANEL
MR
Supply, installation,testing & commissioning of floor mounting
front operated front access extensible type cubicle panel
totally enclosed, dust and vermin proof with IP-42 /55
protection with hinged and lockabale doors.CRCA sheets
including interconnections,tinned copper crimping lugs,
bonding to earth and painting suitable for use at 415 V,
3phase 4 wire 50 Hz system, and to withstand a fault level of
35 KA symmetrical for 1 sec at 415 V complete as per
specifications, as required and as below : All switchboards
shall have provision for entry of cables from the bottom as
required. All live accessible parts shall be shrouded and all
equipment shall be finger touch proof. The bus bars shall be
insulated with heat shrinkable sleeves.SMC/DMC shrouds
and busbar supports shall be used with Indication lamp, C.T
, Digital Voltmeter, Digital Ammeter and control fuse etc.
complete.
18
Main Panel(SCHOOL) with 63A 4P MCCB -1 No as incomer
, 40A 4P MCB -3 Nos , 25A 4P MCB -5 Nos & 32A 2P MCB -
3 Nos as Outgoing with E.C Busbars with 1no 65KA VSD
along with 1no 32A 4P MCB .
SCHOOL 1.0000 set 92428.00 92428.00
MR
Main Panel(HOSTEL) with 63A 4P MCCB -1 No as incomer ,
40A 4P MCB -3Nos , 25A 4P MCB -2 Nos & 32A 2P MCB -3
Nos as Outgoing with E.C Busbars with 1no 65KA 4P VSD
along with 1no 32A 4P MCB .
HOSTEL 2.0000 set 85972.00 171944.00
MR
PANEL with 40A 4P MCB -1 No as incomer ,5-30A Digital 1
phase energy Meter -3 nos followed by 40A 2P MCB-3 Nos
as Outgoing with Electrolytic Copper Bus Bars.
STAFF QUARTERS 1.0000 set 52826.00 52826.00
SUBTOTAL 317198.00
FIXTURE
MR
Supply, Installation, Testing and Commissioning of pre-wired
fluorescent fiiting / compact fluorescent fitting /LED fitting of
all sizes complete with all accessories and lamp etc. directly
on ceiling /wall or recessed in false ceiling , including
connection with 1.5 sq.mm FR PVC insulated single core
multistrand copper conductor and earthing as required.
19
Ceiling/ Wall mounted indoor type BULK HEAD LED
Luminaire with LED Lamp similar to Syska SSK-BH-9W or
equivalent.
SCHOOL 11 Nos. 1290.00 14190.00
20 MR
Supply & fixing of Wall / Ceiling mounted indoor type
BATTEN LED Luminaire of Ujalla Scheme ( Energy
Efficiency Services Ltd - EESL)
SCHOOL 218 Nos. 353.00 76954.00
21 MR
Supply & fixing of 1x9 watt LED lamp of Ujalla Scheme (
Energy Efficiency Services Ltd - EESL ) on existing
Angle/batten holder
SCHOOL 48 Nos. 112.00 5376.00
22 MR
Supply & fixing of Surface mounted round type indoor type
LED Luminaire with LED Lamp similar to Syska SSK-SDC-
18W-N or equivalent.
SCHOOL 9 Nos. 1555.00 13995.00
23 MR
Supply , fixing & termination of Outdoor Street Light LED
Luminaire with 25w LED Lamp similar to Syska SSK-SLF-CF-
25W or equivalent.
SCHOOL 10 Nos. 1868.00 18680.00
Sign and stamp of EPIL 20 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
B) MRCeiling mounted indoor type T5 LED Luminaire with LED
Lamp Similar to WIPRO 2XTLED or equivalent.
18 Nos. 3209.00 57762.00
24 MR
Supply, Installation, Testing and Commissioning of ceiling fan
1200mm sweep, including wiring the down rods of standard
length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single
core multiatrand copper conductor etc. as required.
SCHOOL 102 Nos. 1748.00 178296.00
25 MR
Supply, Installation, testing and commissioning of exhaust fan
of 300 mm sweep 900 rpm in the existing opening, including
making the hole to suit the size of the above fan, making
good the damage complete, connection, etc as required.
SCHOOL 46 Nos. 3316.00 152536.00
SUBTOTAL 517789.00
EARTHING
28 MR
Earthing with copper earth plate 600 mm x 600mm x 3.15
mm thick ISI marked including accessories and providing
masonary with cover plate having loccking arrangement and
watering pipe etc with charcoal and salt as required.
SCHOOL 8 set 6440.00 51520.00
29 MR
Supplying and laying 25 mm x 6 mm CU earth strip ISI
marked at 0.5 meter below ground level as strip earth
electrode including soldering etc. as required.
SCHOOL 141 Rmt 568.00 80088.00
30 MR
Supplying and laying 25 mm x 6 mm CU earth strip ISI
marked on surface or in recess for connection etc as
required.
SCHOOL 79 Rmt 607.00 47953.00
SUBTOTAL 179561.00
TV & TELEPHONE
31 MR
Recessed wiring to telephone point with clip in type modular
telephone socket (RJ 11) ISI marked mounted on G.I
modular box with face plate & cover of suitable size ,
including all accesories and connection as per direction of
Engineer in Charge.
SCHOOL 6 Nos. 396.00 2376.00
32 MR
Recessed wiring to LAN point with clip in type modular lan
socket (RJ45) ISI marked mounted on G.I modular box with
face plate & cover of suitable size , including all accesories
and connection as per direction of Engineer in Charge.
SCHOOL 15 Nos. 503.00 7545.00
33 MR
Recessed wiring to television point with clip in type modular
television socket ISI marked mounted on G.I modular box
with face plate & cover of suitable size , including all
accesories and connection as per direction of Engineer in
Charge.
SCHOOL 10 Nos. 392.00 3920.00
34 MR
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x
150 mm x 60 mm deep on surface / recess with suitable size
of phenolic laminated sheet cover in front including cutting
the wall and making good the same in case of recessed
conduit as required.
SCHOOL 8 Nos. 157.00 1256.00
35 MR
Supplying and fixing of 25mm PVC conduit along with
accessories in recessed wiring including cutting the wall and
making good the same in case of recessed conduit as
required.
SCHOOL 662 Rmt 82.00 54284.00
36 MR
Supplying and drawing one pair, 0.5 sq.mm FR PVC
insulated coper conductor, unarmoured telephone cable in
existing surface / recessed PVC conduit as required.
SCHOOL 154 Rmt 34.00 5236.00
37 MRSupplying and drawing UTP 4 pair LAN cat-6 cable in the
existing surface / recessed PVC conduit as required.
SCHOOL 454 Rmt 52.00 23608.00
38 MR
Supplying and drawing TV cable RG-6 grade, 0.7 mm solid
copper conductor PE insulated shielded with fine tined
copper braid & protected in the existing surface / recessed
PVC conduit as required.
Sign and stamp of EPIL 21 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
SCHOOL 248 Rmt 28.00 6944.00
TOTAL 105169.00
GRAND TOTAL 2565239.00
1 AR
Dry stone pitching 22.5 cm thick including supply of
stones and preparing surface complete. 1078.05 SQM 381.02 410760.30
2 AR
Providing and laying in situ five course water proofing
treatment with APP (Atactic Polypropylene) modified
Polymeric memberane over roof consistingof first coat
of bitumen primer @0.40Kg per sqm, 2nd & 4th courses
ofbonding material @ 1.20 kg/sqm, which shall consist
of blown type bitumen of grade 85/25 conforming to IS :
702, 3rd layer of roofing membrane APP modified
Polymeric membrane 2.0 mm thick of 3.00 Kg/ sqm
weight consisting of five layers prefabricated with centre
core as 100 micron HMHDPE film sandwiched on
bothsides with polymeric mix and the polymeric mix is
protected on both side with 20 micron HMHDPE film.
5th, the top most layer shall be finished with brick tiles
of class designation 10 grouted with cement mortar 1:3
(1 cement : 3 fine sand) mixed with 2% integral water
proofing compound by weight of cement over a 12 mm
layer of cement mortar 1:3 (1 cement : 3 fine sand) and
finished neat (item of laying brick tiles shall be paid for
separately).
2785.58 SQM 294.36 819949.52
3 AR
Providfing and fixing Expandable polystyrene (EPS),Self
Extinguishing (SE) Grade sheets of density 18 kg/m3 to 20
Kg/m3 and size 1000x 500x 50 mm on exterior wall on
smoth surface with adhesive and dowel nails fixed on it.
Application of 2-3 mm base coat of polymerized cementitious
coating over insulation layer reinforced fibre
mesh.Application of 2-3 mm of skin coat of polymerized
cementitious coating over embedded fiber mesh.
1179.80 sqm 1183.60 1396410.16
Total 2627119.99
Sl. No Item of Works Qnty. Unit Rate (Rs.) Amount (Rs.)
1 AR Conducting reconnaissance survey, integrated Hydrological &
Geophysical (Electrical Ressistivity method) survey and selection of
potential source for exploration of Ground Water including
selection and recommendation of site for drilling production wells in
selected area.
1.00 Job 8,500.00 8,500.00
2 Labour for drilling a perfectly vertical bore hole for a specified dia
for a specified depth below G.L through consolidated and un-
consolidated rocks with down the hole hammer drilling rig or
combination drilling rig (1200 cfm/ 300 psi) as required to suit the
site condition as per the direction of EIC including use of own rigs
with its accessories, T&P & consumables etc. for lowering of
200mm dia PVC/GI pipes for housing fitted with socket and with or
without well screen as per the necessity for soft, medium, hard and
boulder formation (GI/ PVC casing pipes, if required to prevent
collapse of over burden is to be provided by the contractor
including lowering and withdrawing after completion of the Tube
Well).
BOREWELL
Name of the work:
Sinking of 200mm x 150mm Dia Production Well - 01 Nos
MISCELLENEOUS ITEM
Sign and stamp of EPIL 22 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
(a) Labour for drilling of 200mm dia & 150mm dia bore from '0' mtr. to
'100' mtr.
75.00 Mtr. 628.60 47,145.00
3 AR Providing & lowering the following size PVC pipes (ASTM) with
or without slotted pipes as per the necessity from 1.00m above
ground level up to required depth and fitting and fixing up in
perfectly vertical position, including cutting, threading pipe and
slotted pipe and supplying and fixing all jointing materials, T&P etc.
complete and keeping the top of the casing pipe threaded including
plugging the tube well to prevent entry of foreign materials from
above. The cost inclusive of pipes, fittings, labour, consumables,
POL, consumables with hire & running charges of machinaries etc.
as per specification & direction of EIC.
(a) Lowering of 200mm (8'') dia PVC plastic pipes Sch-80 as per
ASTM-D-1785/2004 upto required depth.
75.00 Mtr. 1,578.30 118,372.50
4 AR Cleaning and developing the tube well using their own compressor
continuously worked till clear and adequate discharge is obtained
from the tube well including supply and use of all necessary
equipment, labour, all consumables, running & hire charges of
machinaries etc. all complete as per the direction of the EIC.
1.00 Job 4,584.40 4,584.40
5 Supplying all materials, labour & tools and plant and grouting with
cement slurry for sanitary sealing around the GI/PVC casing pipe up
to 3mtrs below ground level to plug the bore hole including cost of
cement all complete as per specification & direction of the Engineer-
in-Charge.
1.00 Job 2,585.10 2,585.10
6 AR Providing all materials required for construction of brick masonry
chamber for encasing the production well with Fly Ash bricks of
size 25cm x 12cm x 8cm having crushing strength not less than
75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite
crusher broken metal of 150mm thick on base & 100mm thick on
top of the chamber, encasing the annular area of casing pipe with
cement concrete 1:2:4 of minimum size 450mmx450mmx1200mm
height including form work, filling the inside cavity with sand, C.C.
1:2:4 on top of the chamber of 50mm thick, 12mm thick cement
plaster 1:4 on outer wall & top surface, earth work excavation in all
kinds of soil/rock including back filling with selected excavated
earth duly watered & rammed with smooth finishing. The height of
chamber should be 450mm from G.L. The cost inclusive of all
materials, labour, T&P etc. complete as per specification &
direction of Engineer-in-charge.
a) Outer size 1400mm x 1400mm x 1200mm ht. chambers 1.00 No. 12,500.00 12,500.00
C) Supply, installation, testing & commissioning of Submersible Pump set with accessories
1 AR Supply, Installation, testing & commissioning of 3-phase, 50Hz
Submersible pump set of required head & discharge including
HDPE delivery pipes of 10 Kgf/cm2
of material grade P.E.-80,
Suitable size of three core flat cable with Bore bunched copper
conductor insulated sheathed with PVC for Submersible Motor with
voltage grade up to 1100 Volt confirming to IS-694/1990 of
required length, out door control panel & required accessories
suitable for 200x150mm size Production Well with required
earthing & service connection from existing source etc. all complete
as per specification & direction of EIC.
1.00 Job 50,000.00
(Provisional)
50,000.00
Total: 243,687.00
Sign and stamp of EPIL 23 Sign and stamp of bidder
1 2 3
In figures In words In figures In words
1 CIVIL WORKS
SubTotal 20767536.80
2 PH WORK
SubTotal 2744271.00
3 ELECTRICAL WORKS
SubTotal 2565239.00
4 MISCELLENEOUS ITEM
SubTotal 2506447.98
5 BORE WELL
SubTotal 243687.00
Total 28827181.78
Note :- 1. The postion of Bidder will as per Gross Value of their Quoted amount as in Summary Sheet
2.The Bidder has to quote above/At Par/below percentage (%) inclusive of all Taxes & Duties including GST.
3. Bidder has to mention the breakup of cost and levies such as GST and other taxes considered in the quoted prices.
CONSTRUCTION OF UPGRADED HIGH SCHOOL AT MUNDAGAON CHAKAPADA,KANDHAMAL, ODISHA
PRICE SCHEDULE
SI. No. DESCRIPTION
ESTIMATED COST (Rs.) TO BE QUOTED BY TENDERER
% ( - ) Below / At Par/AboveAMOUNT IN Rs. AFTER ADDING %
(-) BELOW / AT PAR / (+) ABOVE
4 5= (3 x 4 )
Sign and Stamp of EPIL Sign and Stamp of BIdder
1 2 3
1 CIVIL WORKS
SubTotal 20767536.80
2 PH WORK
SubTotal 2744271.00
3 ELECTRICAL WORKS
SubTotal 2565239.00
4 MISCELLENEOUS ITEM
SubTotal 2506447.98
5 BORE WELL
SubTotal 243687.00
Total 28827181.78
CONSTRUCTION OF UPGRADED HIGH SCHOOL AT MUNDAGAON
CHAKAPADA,KANDHAMAL, ODISHA
BOQ SUMMARY SHEET
SI. No. DESCRIPTION
ESTIMATED COST (Rs.)
Sign and Stamp of EPIL Sign and Stamp of BIdder
Sl. No. Description Of Items Qnty Unit Rate Amount
CIVIL WORKS
1 Site Clearance
ref. from analysis
item no-3 page
no-198
Clearing and grubbing road land including
uprooting rank vegetation, grass, bushes,
shrubs ,sapling and trees girth up to 300 mm,
removal of stumps of trees cut earlier and disposal of
unserviceable material and stacking
of serviceable material to be used or auctioned, up to a
lead of 1000 metres including removal
and disposal of top organic soil not exceeding
150 mm in thickness. 1166.00 sqm 3.87 4509.03
2 i) Surface cutting
ref. from analysis
item no-3 page
no-6
Earthwork in stoney earth and gravels mixed with stone
and boulder not exceeding 0.014 cum in volume within
50m initial lead and 1.5 m initial lift including rough
dressing and breaking clods to maximum 5 cm to 7 cm
and lying in layers not exceeding 0.3 m in depth and as
per specification approved by the department.
514.60 cum 199.55 102690.89
ref. from analysis
item no-5 page no-
4
Cutting in disintegrated rock not requiring blasting tobe
removed by pick axes and crow bar sand depositing
materials within 50m lead and 1.5m initial lift including
rough dressing as per direction and specification of the
department, stacking useful materials separately as
ordered. 514.60 cum 324.36 166914.87
3 a) Earthwork Excavation for foundation
ref. from analysis
item no-2(a) page
no-2
Earth work in excavation in all kinds of soil by
mechanical means (Hydraullic excavator) / manual
means overareas (exceeding 30 cm in depth, 1.5 m in
width as well as 10sqm on plan) inculding disposal of
excavated earth up to 50 m and lift upto 1.5m with all
lead and lift including shoring, shuttering & dewatering
(if required) with cost of all Labour, Labourcess ,Hire &
Running charges of the water pumps, T & P required for
the work complete asdirected by the Engineer- in-
charge.
i) hard soil 931.31 cum 127.96 119168.81
ref. from analysis
item no-3 page no-
4
ii) Soft Rock 224.00 cum 199.6 44700.25
ref. from analysis
item no-19 page
no-9
iii) Hard Rock 224.00 cum 1690.20 378604.80
b) ref. from analysis
item no-8 page no-
6
Extra for every additional lift of 1.5 m or part there of
in excavation/ banking excavated or stacked
materials
Hard soil 68.71 CUM 10.20 700.88
Ordinary /hard rock 68.71 CUM 58.30 4006.02
4 Sand Filling
ref. from analysis
item no-15 page
no-10
Supplying & Filling foundation trenches , plinth & ditches
with clean course river sand well watered and rammed
in layers not exceeding 23 c.m. in depth with all lead
and lift including cost, conveyance, loading, unloading,
stacking , royalties and all taxes of sand,cost &
conveyance of water, cost of all Labour,labour
cess,T&P required for the work etc. complete in all
respect as directed by the Engineer- in-charge.
579.36 cum 273.10 158223.03
5 P.C.C( 1:4:8)
ref. from analysis
item no-4 page no-
43
Providind and laying of cement concrete of grade 1:4:8
(1 Cement : 4 coarse sand : 8 graded stone aggregate
40 mm nominal size of approved quality from quarry
mixing in concrete mixer,lowering and compacting in
proper thickness ,watering and curing for the required
period.including all cost of labour ,material ,conveyance,
royalities and taxes,sundries,T&P etc,but excluding cost
of centering and shuttering all complete as per the
direction of Engineer-In-Charge.
143.11 cum 4148.00 593607.99
CONSTRUCTION OF UPGRADED SCHOOL AT MUNDAGAON CHAKAPADA,KANDHAMAL,
ODISHA
Sign and stamp of EPIL 1 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
6 BACK FILLING
ref. from analysis
item no-14 page
no-10
Filling available excavated earth (excluding rock) in
trenches plinth sides of foundation etc.in layers not
exceeding 20 cm in deepth ,consolidating each
deposited layers by ramming and watering ,lead up to
50 m and lift up to 1.5 mt. etc including cost of all labour
, sundries etc complete in all respect as per the
direction of Engineer-In-Charge. 310.44 cum 71.10 22072.13
7 ANTITERMITE TREATMENT
MR
Supplying, diluting and preparing chemical emulsion like
CHLORPYRIPHOS or other chemicals approved by
Central Insecticides Board or as directed by the
manufacturer and spraying the mixture uniformly by
sprayer as pre-constructional anti termite treatment and
creating a chemical barrier under and around the
column pits, wall trenches, basement excavation, top
surface of plinth filling, junction of walls and floors
along with external perimeter of the building, expansion
joints, surrounding the pipes and conduits etc. complete
at the rate of 7.5 liters (or as directed by the
manufacturer) per sqm on vertical and 5.0 liters per sqm
on horizontal surfaces, 50% of the emulsion to be filled
in the holes made in trenches at 150mm center to
center etc.complete as per IS:6313/1981(Part-II) and as
per the direction of the Engineer-in-charge including
cost of all materials, labour, taxes, etc. complete.
1141.88 sqm 75.00 85641.00
8 R.C.C.M25
ref. from analysis
item no-1(c) page
no-259
Providing, lifting, hoisting and laying Reinforced cement
concrete of M-25 Grade for Footings, plinth
band,beam,column, lintel and slab. with 12mm to 20mm
size black hard crusher broken granite chips of
approved quality from approved quarry including mixing
and compacting to proper shape and size, level and
plumbs and finishing the exposed surfaces smooth,
scaffolding, watering and curing for the required period
including cost of all materials with taxes, royalties
transportation, loading and unloading, all labour,
sundries,T&P including hire & running charges of
concrete mixer and vibrator etc completed as per
direction of the Engineer-in-charge , including the cost
for centering and shuttering but excluding cost for
reinforcement bars for the work
8.1 AR Column base footing 181.90 cum 5369.85 976760.29
8.2 AR Plinth beam 39.69 cum 5670.31 225036.08
8.3 AR Column - Gr. Floor 59.49 cum 10490.83 624051.05
8.4 AR Column - 1st. Floor 36.45 cum 11593.45 422560.94
8.5 AR Column - 2nd Floor 11.75 cum 12913.96 151794.27
8.6 AR Lintel - Gr. Floor 9.49 cum 8232.15 78114.02
8.7 AR Lintel - 1st. Floor 8.07 cum 8883.03 71644.00
8.8 AR Beam -g floor 45.03 cum 10490.83 472446.80
8.9 AR Beam - 1ST floor 37.65 cum 11593.45 436529.45
8.10 AR Beam - Terrace floor 3.97 cum 12913.96 51280.07
8.11 AR Roof slab -G floor 125.40 cum 8554.98 1072763.16
8.12 AR Roof slab - 1st floor 102.32 cum 9270.43 948536.18
8.13 AR Roof slab - Head room level 9.75 cum 10126.34 98765.15
8.14 AR Staircase - Gr. Floor 12.55 cum 9055.44 113677.73
8.15 AR Staircase - 1st. Floor 10.16 cum 9870.99 100316.86
8.16 AR Chaja G floor 74.26 SQM 705.20 52371.05
8.17 AR Chaja 1st floor 38.50 SQM 781.53 30092.34
9 Reinforcement
Sign and stamp of EPIL 2 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
.Providing, fixing TOR Fe-500 reinforcement bars for
RCC work of required diameter of approved quality with
straightening, cutting, bending, binding welding and
joining (if necessary) and tying the grills and placing in
position as required for R.C.C. work and providing fan
hooks, hoisting, lowering and laying including cost,
conveyance and taxes of M.S. Rods or tor steel and
binding wires of 18 to 20 gauge and labour required for
the work for bending, binding and tying the grills in all
heights as per the specification & direction of E-I-C.
(Linear measurements will be taken & quantity will be
calculated on standard weight. Weight of binding wire
will not be considered for measurement.)
Foundation and plinth 199.24 QNTL 5542.59 1104312.58
Ground Floor 297.64 QNTL 5542.59 1649696.36
First Floor 246.30 QNTL 5556.87 1368669.20
Terrace Floor 36.37 QNTL 5571.87 202663.07
10 Fly Ash Brick Masonary (1:6) (superstructure)
ref. from analysis
item no-3 page no-
73
Brick work with Fly Ash bricks size having crushing
strength not less than 75Kg/cm2 with dimensional
tolerance ±8 percent in cement mortar1:6 in Super
structure including watering curing, cost of carriage,
royalty and taxes of all materials, cost of all labour, T&P
etc complete as per the direction of E.I.C.
Substructure 98.56 Cum 3571.70 352026.75
Ground Floor 295.36 Cum 3605.00 1064772.80
First Floor 286.62 Cum 3778.20 1082907.68
Terrace Floor 108.49 Cum 3977.30 431497.28
11 Fly Ash Brick Masonary (1:4) (in superstructure)
ref. from analysis
item no-2 page no-
71
Fly ash bricks masonary work using having crushing
strength not less than 3.5 kg /cm2 in cement mortar 1:4)
for half brickmasonary (110mm) walls
Ground Floor 39.18 Cum 3779.50 148087.73
First Floor 27.33 Cum 3817.80 104327.84
12 12 mm Plastering
ref. from analysis
item no-17 page
no-90
Providing 12mm thick cement plaster to the surface of
brick masonary wall with cement mortar (1:6) including
racking out joints, scraping and cleaning the surface and
finishing the plaster surface smooth using wooden floats
only to proper plumbs and level and making grooves
and beads to give required ornamental finish as per
drawings including cost of all materials, conveyance,
loading and unloading, all taxes and royalities, all
labour, scaffolding, watering and curing, sundries and
T&P etc all complete as per direction of the Engineer- in-
charge.
Ground Floor 2706.28 Sqm 102.20 276582.07
First Floor 2246.44 Sqm 105.70 237449.02
Terrace Floor 148.72 Sqm 109.30 16255.14
13 MR 16 mm Plastering
Providing 16 mm thick cement plaster to the surface of
brick masonary wall with cement mortar (1:6) including
racking out joints, scraping and cleaning the surface and
finishing the plaster surface smooth using wooden floats
only to proper plumbs and level and making grooves
and beads to give required ornamental finish as per
drawings including cost of all materials, conveyance,
loading and unloading, all taxes and royalities, all
labour, scaffolding, watering and curing, sundries and
T&P etc all complete as per direction of the Engineer- in-
charge.
Ground Floor 1017.19 Sqm 146.20 148713.11
First Floor 813.04 Sqm 149.40 121468.20
AR Terrace Floor 786.77 Sqm 152.70 120139.28
14 6 mm Plastering
Sign and stamp of EPIL 3 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
Providing 6mm thick cement plaster with cement mortar
of (1:4) to ceilings of roof slabs, stairs, landings, chajja,
shelves, columns, beams and lofts etc. including
roughening, scraping and cleaning and finishing the
plastered surface smooth using wooden floats only to
proper plumbs and level, making grooves and beads to
give required ornamental finish as per drawing including
cost of all materials, conveyance, loading and
unloading, all taxes and royalities, all labour,
scaffolding, watering and curing, sundries and T&P etc
all complete as per direction of the Engineer- in- charge.
AR Ground Floor 904.27 Sqm 112.10 101368.40
First Floor 716.97 Sqm 114.60 82164.49
Terrace Floor 70.98 Sqm 117.20 8319.01
15 Grading plaster
4cm thick grading concrete 1:2:4 on roof slab with 12
mm and down graded size hard crusher broken grinite
chips including watering curing cost of materials add
water proofing compounds for the works etc, complete
as per the specification of the engineer-in-charge.
Arrived from epm
rate portico 91.23 Sqm 515.70
47047.75
Terrace Floor 964.86 Sqm 561.00 541285.99
b) Water proofing
Providing and laying water proofing treatment in sunken
portion of wc, bathroom etc by applying cement slurry
mixed with water proofing cement compound as per
direction of Engineer-in-charge.
384.43 Sqm 417.34 160438.85
16 Artificial Stone Flooring
AR
Providing and laying 5cm artificial stone flooring with
cement concrete (1:2:4) including punning using 12mm
size hand broken granites chips. Including providing and
fixing glass strips in joints of cement concrete floors in
1m x 1m grid. 40mm wide and 4 mm thick including cost
of all materials, labours, taxes & royalities, conveyance,
loading and unloading, sundries, T&P etc. Complete as
per the specification & direction of Engineer- in- charge.
Ground Floor 840.04 Sqm 370.20 310984.54
First Floor 655.11 Sqm 377.40 247236.78
17 Arrived from epm
rate
Cement Punning for skirting
Providing and laying 12mm thick cement plaster (1:4)
over brick work with cement punning in skirting.
Including cost of all materials , labours, taxes &
royalities, conveyance, loading and unloading, sundries,
T&P etc. Complete as per the specification & direction
of Engineer- in- charge.
Ground Floor 84.27 Sqm 136.20 11477.70
Arrived from epm
rate First Floor64.94 Sqm 138.30
8980.87
18 Antiskid Ceramic Tile Flooring
ref. from analysis
item no-15 page
no-251
Providing and laying best quality Anti skid Ceramic floor
tile of size 300mm x 300mm x 8mm of approved make
confirming to IS-15622 specifications in floor over
20mm thick cement moratar (1:4) to proper slope, line
and level including cutting to required size and shape,
fixing at corners and splays etc.Including finishing the
joints with epoxy based water proofing grout to match
the color and shade of tiles complete as per the design
& drawing with cost of all materials, labour, conveyance,
taxes, T&P etc. All complete as per the direction of
Engineer- in- charge.
Ground Floor 80.21 Sqm 714.20 57283.99
First Floor 103.63 Sqm 720.30 74645.52
19 Glazed Dado
Sign and stamp of EPIL 4 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
Providing and fixing 1st quality ceramic glazed wall tiles
conforming to IS:15622 (thickness to be specified by the
manufacturer), of approved make, in all colours, shades
except burgundy, bottle green, black of any size as
approved by Engineer- in- charge, in skirting, risers of
steps and dados, over 12mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) and jointing with
grey cement slurry @ 3.3kg per sqm, including pointing
in white cement mixed with pigment of matching shade
complete (Basic cost - 400/sqm)
Arrived from epm
rate Ground Floor356.66 Sqm 650.90
232147.25
First Floor 388.67 Sqm 660.10 256563.16
20 PVC Doors For Toilets
Supplying fitting fixing of P.V.C. door of approved quality
including cost of all materials labour T&P etc complete.
ref. from analysis
item no-11 page
no-244 G FLOOR
28.73 SQM 1846.42 53048.43
FIRST FLOOR 26.19 SQM 1846.42 48365.33
21 DOOR FRAME
Supplying fitting and fixing of door frame made of
seasoned sal wood cost of all labour, all taxes and
T&P etc. complete.
1.90 CUM 46685.80 88703.02
22 FLUSH Door
Supplying fitting and fixing of flush door made out of
32mm flush door including cost of all materials, cost of
all fittings (hinges, tower bolt, aldrop, hadle, screw etc.)
and cost of all labour, all taxes and T&P etc. complete.
Ground Floor 40.60 SQM 5395.30 219049.18
First Floor 15.85 SQM 5395.30 85515.51
Second Floor 5.25 SQM 5395.30 28325.33
23 ALUMINIUM Windows
Supplying fitting and fixing ofALUMINIUM SLIDING
WINDOW including cost of all materials, cost of all
fittings WITH GLASS and cost of all labour, all taxes
and T&P etc. complete
Ground Floor 49.32 SQM 3169.00 156294.98
First Floor 36.30 SQM 3169.00 115034.63
24 MS DOOR
Supplying of M.S. Door, Window with grills, Grills,
collapsible gates made out of M.S. Angle frame, M.S.
Flat, Sheet etc of approved section & design,
electrically welded properly with all necessary locking
arrengement, and 1 coat red oxide primer including cost
of all materials, labour T&P, carriage of materials to site
etc. complete.
Ground Floor 752.30 KG 70.20 52811.46
First Floor 615.40 KG 70.20 43201.08
Second Floor 130.60 KG 70.20 9168.12
25 MS Windows
M.S Panelled Window double leafed shutter with M.S.
Frame & Grill. Made out of the following materials .
Frame:-35x35x6mm M.S angle ,Shutter style Top &
Bottom rail 25x25x3mm M.S Angle.Window panel :-
1.0mm C.R. sheet. Pannel stiffener covering width of
each leaf:-19x5mm,M.S flat 2 nos on each leaf.Hinges
size:-100mm-4 nos(2 nos. each side) bought out as per
ISS.Hold fast :-35x35x6mm MS Angle 100 mm length
bifurcated at the tip 2 nos. on each side.Handle:-
19x5mm M.S Flat fabricated(inside) Tower bolt :2
nos.as per ISS.
Ground Floor 1514.60 KG 68.00 102992.80
First Floor 1351.20 KG 68.00 91881.60
26
Labour charges for fitting, fixing M.S. gates (M.S Door,
Window with grills, Grills, collapsible gates) as per
approved design including cost of all labour, T&P etc.
complete. 312.84 SQM 68.10 21304.68
Sign and stamp of EPIL 5 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
27 VENTILATORS
Providing and fixing of Fixed Ventilators of approved
make to be fabricated from roll formed sections made of
pre-painted steel (base steel as per IS-513 of 0.6 mm
thick “D” quality, galvanized as per IS-277 with zinc of
120 Gm/Sq.mtr) with paint specification being with
primer of 5-7 microns and finished paint with polyster
paint (Black /Pearl white/ Chocolate Brown) of 12-16
microns alongwith the alkyd backer at the back of 5-7
microns and the sizes of outer frame being of 46x52 mm
and with all vertical and horizontal mullions are of 46x70
mm and fixed beadings are of 18x25 mm. Accessories /
gaskets are to be used as per the manufacturer’s supply
and specification like handle being made of high grade
aluminium powder coated and with nylon receiver and
gasket will be made of EPDM. All corner brackets are to
be made of CRCA with zinc phosphating. The mullion
caps and louvered-clips should be of glass filled nylon.
The sections are to be cut to length, mitre joined with
corner bracket and frames are fixed to the
concrete/masonry walls by means of self expanding
screws and glass to be used of 5 mm with all taxes
complete.
Ground Floor 7.69 Sqm 4412.00 33928.28
First Floor 7.90 Sqm 4412.00 34854.80
Terrace Floor 2.86 Sqm 4412.00 12618.32
28 M.S. Grill
Providing, fitting & fixing M.S grill fabricated from 12mm
and 16mm square bars as per approved drawing and
design including cost, conveyance & taxes of all
materials, fabrication charges, fixing in position to RCC
columns / walls in cement concrete (1:2:4) and making
good to the damages complete as per direction of the
Engineer- in- charge. The rates shall be inclusive of all
cost of materials, labour, T&P shuttering etc complete.
Ground Floor 3025.17 Kg 57.60 174249.90
First Floor 2450.75 Kg 57.60 141163.35
29 S.S. RAILING
Supplying, fitting of stainless steel of 304 grade in hand
railing using 50 mm dia of 2 mm thick circular pipe with
Balustrade of size 32 mmx32 mmx2 mm @0.90 mtr c/c
and stainless square pipe bracing of size 32mm x
32mmx 2 mm in 3 rows in stair case as per approved
design etc complete.
Ground Floor 35.65 Rmt 3209.86 114431.51
First Floor 20.60 Rmt 3209.86 66123.12
30 Synthetic Enamel Paint
ref. from analysis
item no-3 page no-
93
Painting synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade
with two or more coats on new work over a coat of
suitable shade with primer of approved brand as per
manufacture's specification including cost of all
materials with taxes and transportation , all labour,
scaffolding, sundries, T&P etc. All complete as per the
direction of the Engineer- in- charge.
Ground Floor 211.98 Sqm 130.80 27726.69
First Floor 173.41 Sqm 133.90 23219.41
31 PUTTY
Providing and Finishing wall surface with Acrylic wall
putty (water based) of approved make and finished
smooth & even surface to receive painting including
cost of scaffolding etc. with cost of all materials, labour
T&P etc. complete.
ref. from analysis
item no-2 page no-
236 Ground Floor 1945.90
SQM 75.90 147694.06
First Floor 1273.21 SQM 76.80 97782.68
Terrace Floor 113.10 SQM 77.70 8787.55
Sign and stamp of EPIL 6 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
32 Weather coat
Painting two coats with Water soluble weather coat
paints of approved shade to the outside walls over a
coat of primer by means of rollers to outside surface of
new walls including all cost of materials, scaffolding,
labour, watering & curing T&P etc complete as per
direction of E-I-C.
ref. from analysis
item no-20 page
no-99 Ground Floor 45.80
119.20 5459.36
First Floor 38.00 121.10 4601.80
Second Floor 45.80 123.00 5633.40
33 Cement paint
ref. from analysis
item no-18 page
no-98
Providing and Finishing the wall surface wth water
proofing Cement paint two coats of approved shade on
new work to give an even shade etc, including all cost of
materials, scaffolding, labour, watering & curing T&P
etc complete as per direction of E-I-C.
Ground Floor 1031.40 Sqm 67.70 69826.01
First Floor 813.05 Sqm 69.00 56100.46
Second Floor 890.28 Sqm 70.40 62675.90
34 Plinth protection
ref. from analysis
item no-7 page no-
46
Making plinth protection 100mm thick of cement
concrete 1:2:4( 1 cement: 2 coarse sand: 4 graded
stone aggregate) 12 mm well rammed including
finishing the top smooth. 14.93 Cum 4845.39 72355.24
35 Distemper
ref. from analysis
item no-22 page no-
99
Finishing the wall surface wth water proofing Cement
paint two coats of approved shade on new work to give
an even shade etc, including all cost of materials,
scaffolding, labour, watering & curing T&P etc complete
as per direction of E-I-C.
Ground Floor 3610.55 Sqm 45.00 162474.76
First Floor 3102.00 Sqm 46.00 142692.00
Second Floor 220.65 Sqm 46.90 10348.50
TOTAL CIVIL WORK 20767536.80
SAY 20767537
Sl. No Item of Works Qnty. Unit Rate (In Rs.) Amount (Rs.)
1 Providing all materials, labour, T&P for laying/fixing of following
dia CPVC pipes S.D.R-11 as per IS-15778 with ISI mark
including fixing of required size CPVC fittings like bend, Tee,
elbow, offsets etc. and the same fixed on wall or floor with holder
bat clamps screw in all floor or laying in trenches including
excavation of earth work in all kinds of soil & backfilling the
trenches as per specification & testing the joints with required water
presure.The cost inclusive of all taxes,duties,transportation
scaffolding etc. as per specification and direction of Engineer-in-
charge.
a) MR 20mm dia 341.84 Mtr. 186.70 63,820.75
b) MR 25mm dia 158.10 Mtr. 252.20 39,873.44
c) MR 32mm dia 81.12 Mtr. 371.07 30,101.20
d) MR 40mm dia 61.00 Mtr. 504.40 30,768.40
e) MR 50mm dia 83.52 Mtr. 783.10 65,404.51
2
MR
Providing all materials, labour, T&P for laying/ fixing of following
dia CPVC pipes Sch-80 as per ASTM-F-441 including fixing of
required size CPVC fittings like bend, Tee, elbow, offsets etc. and
the same fixed on wall or floor with holder bat clamps screw in all
floors or laying in trenches including excavation of earth work in all
kinds of soil & backfilling the trenches as per specification &
testing the joints with required water presure.The cost inclusive of
all taxes, duties, transportation, scaffolding etc. as per specification
and direction of Engineer-in-charge.
a) MR 65mm dia 25.00 Mtr. 565.10 14,127.50
Internal Water Supply & Sanitary Installation.
PLUMBING WORK
Sign and stamp of EPIL 7 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
3 Providing all materials, labour, T&P for laying/fixing of following
dia uPVC pipes as per IS-4985 with ISI mark of 6 kgf/cm2
including fixing of required size uPVC fittings
like,bend,Tee,elbow,offsets,etc. and the same fixed on wall or floor
with holder bat clamps screw in all floors or laying in trenches
including excavation of earth work in all kinds of soil & backfilling
the trenches as per specification & testing the joints with required
water presure.The cost inclusive of all taxes, duties, transportation,
scaffolding etc. as per specification and direction of Engineer-in-
charge.
a) MR 40mm dia 25.00 Mtr. 42.50 1,062.50
b) MR 50mm dia 25.00 Mtr. 56.30 1,407.50
4 Providing all materials, labour, T&P for fitting & fixing of
following water supply fittings confirming to IS-15778 with ISI
mark as per ASTM D-2846 & fixing with the pipes after cutting the
pipes to required shape & size including wastage etc. of following
nominal diameter, all complete including testing the joints with
required water pressure.The cost inclusive of all
taxes,duties,transportation scaffolding etc. all complete as per
specification and direction of Engineer-in-charge.
a) MR 25mm dia CPVC ball valve 47.00 No. 612.80 28,801.60
b) MR 32mm dia CPVC ball valve 28.00 No. 1,149.00 32,172.00
c) MR 40mm dia CPVC ball valve 19.00 No. 1,734.10 32,947.90
5 Providing all materials labour, T&P for making grooves in
bricks/stone masonary walls vertically or horizontally up to
required depth and width in all floor for laying of pipes and fittings
up to 50mm dia, testing the joints with required water pressure and
making good the damages with cement concrete 1:2:4 with 12mm
size h.g.c.b.chips and finished smooth with cement morter (1:4) to
original shape including cost of materials, curing, conveyance, taxes
of all materials etc. all complete as per specification & direction of
EIC.839.30
Mtr. 143.50 120,439.55
6 Providing all labour,T&P for cutting holes in bricks or stone
masonry wall for taking pipes and making good the damages with
cement concrete 1:2:4 finished smooth with CP 1:4 to original
shape including cost of all materials, curing, conveyance, taxes,
duties etc. all complete as per specification & direction of Engineer-
in-charge.a) MR For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick
wall
148.00 No. 34.80 5,150.40
b) MR For 75mm to 150mm dia pipe to pass in 250mm thick wall 77.00 No. 147.70 11,372.90
7 Providing all labour,T&P and cutting holes in RCC chajja/roof/floor
for taking pipes through and making good the damages with supply
of all required materials etc. complete as per the direction of the
Engineer-in-charge. 27.00
No. 114.30 3,086.10
8 Providing all materials, labour & T&P for fitting and fixing of white
glazed vitreous china water closet Indian Pan (450mmx350mm) of
approved make as per IS-2556 with ISI mark fixing on the floor
with 32mm PVC Long flush bend and cement concrete 1:2:4 for
fitting the closet etc. all respect in all floors including cost,
conveyance and taxes of all materials etc. all complete as per
specification and as per direction of EIC.
a) MR Indian Pan (450mmx350mm) 38.00 No. 2,013.90 76,528.20
9 Providing all materials, labour, and T&P for fitting and fixing of
PVC low level cistern complete with all internal fittings of
approved make as per IS-7231 with ISI mark in all floor and
providing of necessary PVC wall plug, screws and 15mm dia PVC
water connecting pipe with union at both end including testing etc.
all complete as per specification & direction of Engineer-in-charge.
a) MR PVC low level Cistern 38.00 No. 1,159.40 44,057.20
10 Providing all materials, labour, and T&P for fitting and fixing of
white glazed vitreous china water closet Squirting Pan
(450mmx350mm) of approved make as per IS-2556 with ISI mark
fixing on the floor with 32mm PVC Long flush bend and cement
concrete 1:2:4 for fitting the closet etc. All respect in all floors
including cost, conveyance and taxes of all materials etc. all
complete as per specification and as per direction of EIC.
a) MR Squirting Pan (450mmx350mm) 6.00 No. 2,013.90 12,083.40
11 Providing all materials, labour, T&P for fitting and fixing of white
glazed vitreous china water closet (European pattern) 'P' or 'S' type
with cistern & seat cover, wash hand basin of size 460mmx360mm
with one pair basin bolt, one no. hinged rail 760mm long & 4 nos.
grab rails 600mm long including supply of sutaible PVC wall plug
and Brass screws etc. suitable for handicapped toilets in all floor
etc. all complete including cost, taxes and conveyance as per
specification all complete as per direction of Engineer-in-charge. 1.00
Set 81,226.40 81,226.40
Sign and stamp of EPIL 8 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
12 Supply all materials and labour for fitting and fixing of following
size white glazed vitreous china wash hand basin of approved
make in all floor with supply & fixing of basin bolts & Nut of
approved quality including cutting the walls & floor and making
good the damages including testing with all taxes, duties,
transportation etc. all complete as per specification & direction of
EIC. a) MR 630x450mm size WHB 32.00 Set 2,076.50 66,448.00
13 Supply all materials, labour & T&P for fitting and fixing of
following sizes of white glazed vitreous china flat back, lipped front
urinal basin confirming to specification of approved make as per IS-
2556 with ISI mark in all floor along with supply & fixing of
necessary component parts like pair of C.I./M.S. bracket including
connection from existing water supply pipe line & testing the same
with all taxes, duties, transportation etc. all complete as per
specification & direction of the Engineer-in-charge.
a) MR 420x395x635mm size flat back large standing urinal 14.00 Set 3,166.60 44,332.40
14 Providing all materials, labour, T&P for fixing of following sizes of
bevelled edge mirror of 5mm thick mounted on 4mm thick AC
sheet & CP cup screw with PVC wall plugs in all floor including
cost, conveyance, taxes of all materials complete as per
specification and direction of E.I.C.a) MR 600mm x 450mm size 17.00 No. 632.80 10,757.60
15 Providing all materials, labour,T&P and fittings and fixing of
different water supply (CP on Brass) fitting (Quarter Turn) as per
IS specification & approved make in all floor of following sizes and
specification with leak proof threaded joints with thread seal tape or
any other method as required and directed including all taxes,
duties, transportation etc., testing and rectification of defects after
testing complete as per direction of Engineer-in-charge.
a) MR 15mm dia Short Body Bibcock with wall flange 44.00 No. 977.90 43,027.60
b) MR 15mm dia Angle Stop cock with wall flange 105.00 No. 705.10 74,035.50
c) MR 15mm dia Pillar cock 32.00 No. 1,013.70 32,438.40
d) MR Single Lever Basin Mixer without Pop-up waste 26.00 No. 2,255.60 58,645.60
e) MR Angle Cock Auto closing system for urinal with CP connection pipe 22.00 No. 1,595.50 35,101.00
f) MR O.H. Shower of Square shape of size 150mmx150mm with Shower
Arm 20mm dia x 450mm long & Wall Flange.
5.00 No. 1,150.00 5,750.00
g) MR C.P. Soap Dish Holder 5.00 No. 481.70 2,408.50
h) MR Towel Ring Square with round flange 5.00 No. 656.00 3,280.00
i) MR CP Towel Rail of 600mm long 5.00 No. 970.00 4,850.00
j) MR 600mm long Glass Self 5.00 No. 905.10 4,525.50
k) MR Single lever High flow Divertor with Button assembly & exposed
parts kit consisting of operating lever, wall flange (with seals) &
Button.
5.00 Nos. 3,350.00 16,750.00
l) MR Bath Spout with wall flange 5.00 Nos. 1,007.00 5,035.00
m) MR Health Faucet with 1.00m long PVC tube & wall hook 5.00 No. 763.90 3,819.50
n) MR 15mm dia sink cock with swivel casted spout (Wall mounted 6.00 No. 1,091.60 6,549.60
o) MR 32mm dia C.P.waste (Half Threaded) 22.00 No. 317.50 6,985.00
p) MR 32mm dia C.P. Doom Waste 9.00 No. 377.00 3,393.00
q) MR C.P. Toilet paper holder with flap 5.00 No. 820.30 4,101.50
r) MR C.P. Robe Hook 5.00 No. 425.20 2,126.00
s) MR 150mmx150mm size stainless steel hinged grating 38.00 No. 354.50 13,471.00
t) MR 15mmx50mm C.P. Extension piece 32.00 No. 166.60 5,331.20
u) MR 15mm CP Spreader 14.00 No. 519.00 7,266.00
16 Supply all materials, labour, T&P, fitting and fixing of uPVC SWR
(Ringfit) Pipes (Type-A) of approved make confirming to IS-
13592/1992 with ISI mark, both below & above ground level or
fixing on wall surface in all floors including excavation of earth
work in all kinds of soil & necessary back filling or required
scaffolding with all taxes, duties, transportation including testing
etc. all complete as per specification & direction of the EIC.
a) MR 110mm dia pipe 175.00 Mtr. 220.40 38,570.00
b) MR 75mm dia pipe 42.00 Mtr. 135.80 5,703.60
17 Supplying all materials, labour, T&P, fitting and fixing of following
dia uPVC SWR (Ringfit) fittings of approved make confirming to
IS-14735 with ISI mark with all taxes, duties, transportation &
requisite testing as per specification & direction of EIC.
a) MR 125mm x110mm P-Trap with lip ring 61.00 No. 434.80 26,522.80
b) MR 110mmx110mm 'P' Trap 26.00 No. 243.00 6,318.00
c) MR 110mmx75mm Nahani Trap 54.00 No. 148.10 7,997.40
d) MR 110mm Multifloor Trap 64.00 No. 156.60 10,022.40
e) MR 110mmx87.5º Plane bend 90.00 No. 130.90 11,781.00
f) MR 110mmx87.5º door bend 82.00 No. 150.20 12,316.40
g) MR 110mmx45º Plane Bend 56.00 No. 122.30 6,848.80
h) MR 110mm Single Tee with Door 120.00 No. 208.70 25,044.00
i) MR 110mm Double Tee with Door 54.00 No. 411.20 22,204.80
j) MR 110mm dia single 'Y' 56.00 No. 224.80 12,588.80
k) MR 110mm WC connector/Bend with lip ring 94.00 Nos. 181.30 17,042.20
Sign and stamp of EPIL 9 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
l) MR 110x75mm Reducer 70.00 Nos. 107.30 7,511.00
m) MR 110mm dia Vent cowl 68.00 Nos. 48.70 3,311.60
n) MR PVC Clamp Suitable for 110mm dia pipe 365.00 Nos. 72.80 26,572.00
18 Providing all materials, labour, T&P for fitting and fixing of
following size of 12mm thick toughened glass for urinal partition of
approved make in all floor with edge moulding & polishing with
chromium plated brass screws, G/W brackets 90° (Double Sided
Back Plate) of DORMA make with all taxes, duties, transportation
etc. all complete as per specification & direction of Engineer-in-
charge. a) MR Toughened glass partition of Size-1200mm ht. x 600mm width for
Urinal Partition
5.00 No. 8,334.00 41,670.00
19 Providing all materials, labour, T&P for fitting & fixing of
following sizes of Stainless Steel Kitchen Sink made out of 0.8mm
thick sheet with coupling & strainer, the flat boards for correct
sandwitch between the platform top & granite/marble slab &
making good the damages, fixing of 32mm dia PVC waste pipe etc.
including testing, commissing all complete as per specification &
direction of the Engineer-in-Charge.a) MR Stainless Steel Kitchen Sink of overal size-535 x 460 x 200mm . )
of popular range, satin.
5.00 No. 5,115.40 25,577.00
20 Providing, fitting, fixing including testing & commissioning of
following capacity polyethylene moulded water storage cylindrical
tank with lid & locking arrangement as per IS-12701/1996 with ISI
mark including cutting holes of required size & shape. Providing,
fitting and fixing of CPVC water tank connector / Adaptor with jam
nut etc. for filling, delivery, overflow & wash out arrangements,
including hoisting upto a height of 10 mtr. above the ground level
& placing the tank of required position including construction of
brick masonry pedestal up to 450mm ht. from roof with RCC
(M-20) base slab, beam of approved design & 125mm thick brick
masonry wall up to 2/3 ht.of tank (all round) in C.M. 1:4, 12mm
C.P. 1:4 over brick work etc. all complete as per specification &
direction of EIC.
a) MR 5000 Ltr. capacity 5.00 No. 57,830.00 289,150.00
21 Providing all materials, labour, T&P for fitting & fixing of storage
water heater of following capacity & fixed on the wall with bolt &
nut after drilling of suitable bolt holes including supply of clamp,
bolt, washer, wall plug etc. suitable for the water heater. The cost
inclusive of all taxes, duties, transportation, scaffolding etc. all
complete as per specification & direction of EIC.
a) MR 25 ltr. Capacity 5 star rating Water Heater 1.00 No. 8,381.00 8,381.00
22 Providing all material, labour, T&P and construction of Gully Trap
chamber of size as mentioned below with 250mm nominal size
flyash Brick having crushing strength not less than 75kg/ sqcm in
CM 1:4 over a bed of 100mm thick C.C. (1:3:6) using 40mm size
HG metal, plastering with 12mm thick cement plaster with cement
punning in cement mortar 1:4 on inner surface and 12mm thick
cement plaster in cement mortar (1:4) on external surface,fitting &
fixing of PVC Gully Trap and pre-cast factory made (SFRC) cover
with frame of opening size 260mmx260mm, moulding and shaping
the channel & benching with C.C (1:2:4) with hard granite chips
12mm size, earth work excavation in all kinds of soil & rock and
filling the cavity of the chamber with excavated & selected earth
levelling the surface around the chamber with disposal of surplus
earth within 50mt lead as per specification, design & drawing
including cost of curing and all taxes, royalty, cost, conveyance etc.
all complete as per specification & direction of EIC.
a) Inner size 300mmx300mmx450mm depth Gully Trap chamber 31.00 No. 1,783.00 55,273.00
23 AR Providing all materials required for construction of inspection
chamber with Fly Ash bricks of size 25cm x 12cm x 8cm having
crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6
with 40mm size hard granite crusher broken metal of 100mm thick,
12mm thick cement plaster 1:3 both in outer & inner surface of the
wall & bottom, earth work excavation in all kinds of soil/rock
including back filling with selected excavated earth duly watered &
rammed. RCC M-20 with 20mm & down size H.G crusher broken
chips having minimum cube strength 200Kg/Sqcm at 28 days
confirming to IS-453/76 & IS-3370 for roof slab of 125mm average
thick with form work as per the requied size including cost for MS
reinforcement as per approved design & drawing & fixing of Pre-
cast factory made manhole cover with frame (SFRC medium duty)
for opening of 500mm including cost of all materials, labour, T&P
etc. complete as per specification & direction of Engineer-in-
charge.
a) Inner size 750mm x 750mm x 500mm depth 8.00 No. 8,074.00 64,592.00
MR Total 1,879,857.16
Say 1,879,857.00
External Sewerage Disposal System.
Sign and stamp of EPIL 10 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
1 Earth work :
a)Ref. from analysis
item no-1,2,3
page no-1,2,4
Earth work in all kinds of soil within 50m initial lead & 1.5m initial
lift including dressing, levelling & breaking clods to maximum 5cm
to 7cm & laying in layers not exceeding 0.3m in depth & as per
specification & direction of Department.
63.21 Cum. 138.40 8,748.26
b)
AR
Filling foundation trenches and Plinth with excavated & selected
earth, laying in layers not exceeding 23cm thick well watered &
rammed etc. complete including labour , T&P, lead & lift cost &
conveyance, loading, unloading etc. complete as per specification &
direction of EIC.
60.24 Cum. 76.90 4,632.46
2
Ref. from analysis
item no-7 page no-
46
Providing all materials,labour,T&P for construction of Cement
Concrete (1:2:4) Pedestal with 12mm size h.g.c.b. chips as per
approved design & drawing for uPVC pipe. The cost inclusive of all
taxes, royality, hire & running charges of all machineries,
Transportation charges with all consumables etc. all complete as per
specification & direction of EIC.a) MR For 160mm dia pipe:- 61.25 Nos. 979.00 59,963.75
b) MR For 110mm dia pipe:- 35.50 Nos. 700.00 24,850.00
3 Providing all materials, labour, T&P and laying of uPVC in standard
lengths suitable for push on joints including lowering the pipes in
to trenches to required depth below G.L, with proper allignment &
gradient, testing, commissioning, de-watering (if required)
including all taxes & duties etc. all complete as per specification &
direction of EIC. (Excluding cost for earth wok, back filling which
will be paid separately).a) MR For 160mm dia pipe:- 51.68 Mtr. 458.20 23,679.67
b) MR For 110mm dia pipe:- 30.23 Mtr. 220.40 6,662.69
4 Providing all materials, labour, T&P required for construction of
RCC M-25 man hole chamber of following sizes having cube
strength 250 Kg/cm2
at 28 days confirming to IS-456/2000 & IS-
3370 at all locations & height using h.g. stone aggregate (Crusher
broken) of 20mm & down size including machine mixing, lifting,
hoisting, conveying, placing in position, mechanical consolidation,
curing, de-watering (if required). The minimum thickness of RCC
base slab, all side walls & roof slab shall be not less than 150mm,
150mm & 125mm (avg.) respectively. The cost shall be inclusive of
rigid, levelled & plumbed centering & shuttering to required slope,
allignment & size for all kinds of RCC work with steel/ ply
centering materials with all bracing, ties, anchorage & supports and
removing the same after required paid & placing
M.S.Reinforcement HYSD bar of required dia including cutting,
bending, straightening of approved quality as per approved design
& drawing & tying the grills for RCC works & placing in position
using binding wires (18 to 20 gauge soft drawn & cold annealed).
PCC 1:3:6 with 40mm size h.g.c.b. metal of 100mm thick,
moulding & shaping the channel & benching with C.C. 1:2:4 with
12mm size h.g.c.b. chips, 12mm thick cement plaster 1:3 with
cement punning on inner wall surface, earth work excavation in all
types of soil/rock including cement concrete cutting as per site
condition, filling the foundation base with sand duly watered &
rammed, providing, fitting & fixing of pre-cast factory made man
hole cover with frame (SFRC heavy duty) for clear opening 560mm
dia, providing, fitting & fixing of poly propylene steel reinforced
man hole steps of approved quality & size in two parallel line of
300mm spacing in vertical wall with centre to centre 375mm
(staggered) etc.all complete as per specification & direction of EIC.
a) AR Manhole chamber of Inner size 800mmx900mmx 900mm depth. 10.00 Nos. 19,360.00 193,600.00
b) AR Extra for every additional depth of 0.10mtr. or part there of manhole
size 800mmx900mm from 900mm depth upto 1500mm depth.
4.00 Mtr. 10,767.00 43,068.00
Total:- 365,204.83
Say :- 365,205.00
Sl. No Item of Works Qnty. Unit Rate (In Rs.) Amount (In Rs.)
1 Earth Work:
a)Ref. from analysis
item no-1,2,3
page no-1,2,4
Earth work in all kinds of soil within 50m initial lead & 1.5m initial
lift including dressing, levelling & breaking clods to maximum 5cm
to 7cm & laying in layers not exceeding 0.3m in depth & as per
specification & direction of Department.
i) Upto 1.50m initial lift 62.05 Cum. 138.40 8,587.72
ii) From 1.50m to 3.00m lift 52.36 Cum. 148.60 7,780.70
b)
AR
Filling foundation trenches and Plinth with excavated & selected
earth, laying in layers not exceeding 23cm thick well watered &
rammed etc. complete including labour , T&P, lead & lift cost &
conveyance, loading, unloading etc. complete as per specification &
direction of EIC.
53.04 Cum 76.90 4,078.78
RCC Septic Tank of inner size 5.00x1.60x1.40m
liquid depth of 2 year cleaning interval.
Sign and stamp of EPIL 11 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
2
ref. from analysis
item no-15 page
no-8
Filling the pipe line trenches with sand including watering &
ramming etc. complete including all labour, T&P, cost of sand,
conveyance, taxes, royality, loading & unloading as per
specification & direction of EIC.
2.21 Cum 271.00 598.91
3
ref. from analysis
item no-3 page
no-43
Providing and laying plain cement concrete (1:3:6) in foundation
and bottom layers using 40mm size hard black crusher broken
granite metal of approved quality and size from approved quarry
including cost, conveyance, royality, all taxes complete and
providing all labour T&P for machine mixing, lowering, laying and
compacting to proper thickness, watering and curing for the
required period and including dewatering (if required) as per the
specification & direction of Engineer-in-charge.
4.42 Cum 4,509.00 19,929.78
4
ref. from analysis
item no-1 (d)
page no-260
Providing all materials, labour, T&P for laying R.C.C. M-30
having minimum cube strength of 300 Kg/cm2
at 28 days
confirming to IS 456/79 & IS 3370 for water tank at all location &
height using graded H.G stone aggregate of 20mm & down size
including machine mixing, lifting, conveying, placing in position
mechanical consolidation curing, dewatering (if necessary) &
testing the concrete for water tightness, rectification of defects if
any etc., complete all as per specification & drawing including cost
of all material, labour, machinery hire charges, T&P and all testing
charges (but excluding cost of reinforcement bars, binding wirings,
centering & shuttering etc.) as per the specification & direction of
Engineer-in-charge.
25.50 Cum 5,443.50 138,809.25
5
ref. from analysis
item no-10 page
no-53
Providing & making strong, rigid, levelled & plumbed centering &
shuttering to required shape, allignment & size for all kinds of RCC
works with wooden or steel centering materials with all bracing,
ties, anchorage & supports including provision for necessary holes
for P.H. works including cost of nails etc. complete & dismantling
& removing the same after required interval from the date of casting
including cost of all materials with transportation, hire charges,
taxes, loading, unloading all labour, T&P, sundries etc. complete as
per the specification & direction of the Engineer-in-charge.
197.20 Sqm 331.10 65,292.92
6 ref. from analysis item
no-9.A page no-52
Cutting, bending, binding, straightening HYSD bars of required
diameter of approved quality as per approved design & drawing &
tying the grill for RCC works & placing in position using binding
wire (18 to 20 gauge, soft drawn & cold annealed) including cost of
all labour, material, sundries, T&P, scaffolding etc. all complete as
per the specification & the direction of Engineer-in-charge.
24.14 Qntl 5,542.80 133,803.19
7
ref. from analysis
item no-29 page
no-110
Providing plaster with cement mortar including cement punning/
bitumen painting where required finished smooth over brick work
with waterproofing cement based compound of approved quality
including finishing smooth to proper slope and plane including
cost of all materials with conveyance, royalty, taxes, watering,
scaffolding and curing, all labour and T&P etc. complete as per
specification & direction of EIC.
-
a) 12mm thick C.P. 1:3 with punning 90.27 Sqm 151.80 13,702.99
8
ref. from analysis
item no-10 page
no-53
Providing and laying Cement concrete(1:2:4) for A.S. Flooring of
25mm average thick using graded hard granite stone aggregate of
12mm size of approved quality and from approved quarry, laid to
level and slopes, including finishing smooth or checkered with
floating coat of cement punning, watering and curing etc. complete
as per drawings specification and direction of Engineer-in-charge.
21.69 Sqm 243.40 5,280.29
9
ref. from analysis
item no-7 page
no-44
Providing and laying cement concrete (1:2:4) in foundation and
bottom layers using 12mm size hard black crusher broken granite
chips of approved quality and size from approved quarry including
cost, conveyance, royality, all taxes complete and providing all
labour T&P for machine mixing, lowering, laying and compacting
to proper thickness, watering and curing for the required period and
including dewatering (if required) as per the specification &
direction of Engineer-in-charge.
0.68 Cum 5,680.30 3,862.60
10 Providing, fitting & fixing of following sizes of precast factory
made RCC man hole cover with frame including locking
arrangement. The cost inclusive of all labour, T&P, taxes,
transportation etc. all complete as per specification & direction of
EIC.
-
a) 500mm dia clear opening RCC man hole cover with frame.(medium
duty)
6.00 No. 1,263.00 7,578.00
11 Providing, fitting & fixing of Poly Propylene man hole steps of
approved quality & size in two parallel line of 300mm spacing in
vertical walls with centre to centre 375mm (staggered).The cost
inclusive of all labour, T&P, taxes, transportation etc. all complete
as per specification & direction of EIC.
40.00 No. 269.00 10,760.00
Sign and stamp of EPIL 12 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
12 Providing, fitting & fixing of 110 diax1.80m long UPVC SWR pipe
(Type-A) of approved make confirming to IS-13592/1992 with Vent
Cowl including construction of cement concrete pedestal (1:2:4) of
size 0.30mx0.30mx0.45m ht. The cost inclusive of all labour, T&P,
taxes, transportation etc. all complete as per specification &
direction of EIC.
2.00 No. 590.00 1,180.00
13 Providing, fitting & fixing of 150mm dia S.W. Tee. The cost
inclusive of all labour, T&P, taxes, transportation etc. all complete
as per specification & direction of EIC.
4.00 No. 500.00 2,000.00
14 Providing all labour, T&P for benching & making Channel for inlet
& outlet chamber.
2.00 Job 97.90 195.80
Total :- 423,440.92
Say:- 423,441.00
Sl. No Item of Works Qnty. Unit Rate (In Rs.) Amount (In Rs.)
1 Earth Work:
a) Ref. from analysis item
no-1,2,3 page no-1,2,4
Earth work in all kinds of soil within 50m initial lead & 1.5m initial
lift including dressing, levelling & breaking clods to maximum 5cm
to 7cm & laying in layers not exceeding 0.3m in depth & as per
specification & direction of Department.i) Upto 1.50m initial lift 16.83 Cum. 138.40 2,329.27
ii) From 1.50m to 3.00m lift 15.13 Cum. 148.60 2,248.32
b) AR Filling foundation trenches and Plinth with excavated & selected
earth, laying in layers not exceeding 23cm thick well watered &
rammed etc. complete including labour , T&P, lead & lift cost &
conveyance, loading, unloading etc. complete as per specification &
direction of EIC.
5.95 Cum 76.90 457.56
c) AR Providing all material, labour & T&P for filling the both inner &
outer surface of soak pit with 40mm size hard granite hand broken
metal etc. complete including lead & lift cost & conveyance,
loading, unloading etc. complete as per specification & direction of
EIC.
15.13 Cum 2,132.30 32,261.70
2
ref. from analysis
item no-15 page
no-8
Filling the foundation trenches with sand including watering &
ramming etc. complete including all labour, T&P, cost of sand,
conveyance, taxes, royality, loading & unloading as per
specification & direction of EIC.
0.17 Cum 271.00 46.07
3
ref. from analysis
item no-3 page
no-43
Providing and laying plain cement concrete (1:3:6) in foundation
and bottom layers using 40mm size hard black crusher broken
granite metal of approved quality and size from approved quarry
including cost, conveyance, royality, all taxes complete and
providing all labour T&P for machine mixing, lowering, laying and
compacting to proper thickness, watering and curing for the
required period and including dewatering (if required) as per the
specification & direction of Engineer-in-charge.
0.43 Cum 4,509.00 1,916.33
4
ref. from analysis
item no-2 page
no-71
Providing all material, labour, T&P for Fly ash Brick masonry work
using Fly ash of 25cm X 12 cm X 8 cm size having crushing
strength not less than 75Kg/Sqcm. in cement mortar (1:4) including
cost, conveyance, taxes, royalties, loading and unloading of all
materials and labour and scaffolding, watering, curing T&P etc.,
complete as per the specification & direction of the Engineer-in-
charge.
-
a) Foundation & Plinth 3.06 Cum 3,831.80 11,725.31
5 ref. from analysis
item no-9A page no-
52
Providing all material, labour, T&P for using Dry Fly ash Brick of
25cm X 12 cm X 8 cm size having crushing strength not less than
75Kg/Sqcm. including cost, conveyance, taxes, royalties, loading
and unloading of all materials and labour and scaffolding, watering,
curing T&P etc., complete as per the specification & direction of
the Engineer-in-charge.
-
a) Foundation & Plinth 3.75 Cum 2,972.50 11,156.52
6 Providing all materials, labour, T&P for laying R.C.C. M-20
having minimum cube strength of 200 Kg/cm2 at 28 days
confirming to IS 456/79 & IS 3370 for water tank at all location &
height using graded H.G stone aggregate of 20mm & down size
including machine mixing, lifting, conveying, placing in position
mechanical consolidation curing, dewatering (if necessary) &
testing the concrete for water tightness, rectification of defects if
any etc., complete all as per specification & drawing including cost
of all material, labour, machinery hire charges, T&P and all testing
charges (but excluding cost of reinforcement bars, binding wirings,
centering & shuttering etc.) as per the specification & direction of
Engineer-in-charge.
0.70 Cum 5,067.70 3,547.39
Construction of Soak Pit of Inner Dia 1.50m & depth 3.00m
Sign and stamp of EPIL 13 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
7 Providing & making strong, rigid, levelled & plumbed centering &
shuttering to required shape, allignment & size for all kinds of RCC
works with wooden or steel centering materials with all bracing,
ties, anchorage & supports including provision for necessary holes
for P.H. works including cost of nails etc. complete & dismantling
& removing the same after required interval from the date of casting
including cost of all materials with transportation, hire charges,
taxes, loading, unloading all labour, T&P, sundries etc. complete as
per the specification & direction of the Engineer-in-charge.
3.91 Sqm 331.10 1,294.60
8 Cutting, bending, binding, straightening HYSD bars of required
diameter of approved quality as per approved design & drawing &
tying the grill for RCC works & placing in position using binding
wire (18 to 20 gauge, soft drawn & cold annealed) including cost of
all labour, material, sundries, T&P, scaffolding etc. all complete as
per the specification & the direction of Engineer-in-charge.
0.51 Qntl 5,542.80 2,826.83
9 Providing plaster with cement mortar including cement punning/
bitumen painting where required finished smooth over brick work
with waterproofing cement based compound of approved quality
including finishing smooth to proper slope and plane including
cost of all materials with conveyance, royalty, taxes, watering,
scaffolding and curing, all labour and T&P etc. complete as per
specification & direction of EIC.
-
a) ref. from analysis
item no-3 page no-
102
12mm thick C.P. 1:4 13.94 Sqm 116.10 1,618.43
b) ref. from analysis
item no-16 page no-
106
12mm thick C.P. 1:4 with punning 10.37 Sqm 138.60 1,437.28
c) ref. from analysis
item no-7 page no-
103
12mm thick C.P. 1:4 with punning and bitumen painting over
wall top.
2.38 Sqm 158.30 376.75
10 Providing, fitting & fixing of following sizes of precast factory
made RCC man hole cover with frame including locking
arrangement. The cost inclusive of all labour, T&P, taxes,
transportation etc. all complete as per specification & direction of
EIC.
-
a) AR 500mm dia clear opening RCC man hole cover with
frame.(Medium duty)
2.00 No. 1,263.00 2,526.00
Total :- 75,768.35
Say:- 75,768.00
2,744,271.00
Serial No Description of Items UNIT Quantity Unit Rate Total Amount
INTERNAL WIRING.
1 MR
Recessed wiring to light point / first light of group control/ call
bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR
PVC insulated single core multistrand copper conductor of ISI
marked in 20 mm dia non-metalic PVC conduit with 6 Amp,
250 V clip in type switch ISI marked and ceiling rose ISI
marked mounted on G.I modular box with face plate & cover
of suitable size , with 1.5 sq.mm FR PVC insulated single
core multistrand copper conductor as earth wire including all
accesories and connection as per direction of Engineer in
Charge.
SCHOOL Nos. 95 670.00 63650.00
BOYS HOSTEL Nos. 82 670.00 54940.00
GIRLS HOSTEL Nos. 82 670.00 54940.00
STAFF QUARTERS Nos. 28 670.00 18760.00
2 MR
Recessed wiring to secondary light point looped from primary
light point with 1.5sqmm FR PVC insulated single core
multistrand copper conductor of ISI marked with 20mm dia
non-metallic PVC conduit with 1.5sqmm FR PVC insulated
single core multistrand copper conductor for running earth
including 3 plate ISI marked Ceiling rose with all accessories
& connection as per direction of Engineer in charge. (Make of
wire: finolex/ Anchor/Havels/L&T/KDK) Average Length: 3
mtr
SCHOOL Nos. 48 354.00 16992.00
BOYS HOSTEL Nos. 17 354.00 6018.00
GIRLS HOSTEL Nos. 17 354.00 6018.00
ELECTRICAL WORKS
GRAND TOTAL
Sign and stamp of EPIL 14 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
3 MR
Recessed wiring to ceiling fan point with 1.5sqmm FR PVC
insulated single core multistrand copper conductor of ISI
marked with 20mm dia non-metallic PVC conduit with 6Amp
250V Modular Switch,Stepped type Moudular Regulator, Base
& Cover with 1.5sqmm FR PVC insulated single core
multistrand copper conductor for running earth including all
accessories & connection as per direction of Engineer in
charge. (Make of wire: finolex/ Anchor/ Havels/L&T/KDK)
Group B
SCHOOL Nos. 40 1155.00 46200.00
BOYS HOSTEL Nos. 31 1155.00 35805.00
GIRLS HOSTEL Nos. 31 1155.00 35805.00
STAFF QUARTERS Nos. 8 1155.00 9240.00
4 MR
Recessed wiring to Twin control light point with 1.5 sq.mm FR
PVC insulated single core multistrand copper conductor of ISI
marked in 20 mm dia non-metalic PVC conduit with 6Amp,
250 V clip in type 2way switch ISI marked and ceiling rose ISI
marked mounted on G.I modular box with face plate & cover
of suitable size , with 1.5 sq.mm FR PVC insulated single
core multistrand copper conductor as earth wire including all
accesories and connection as per direction of Engineer in
Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V
Guard )Group C
SCHOOL Nos. 2 1058.00 2116.00
BOYS HOSTEL Nos. 2 1058.00 2116.00
GIRLS HOSTEL Nos. 2 1058.00 2116.00
STAFF QUARTERS Nos. 3 1058.00 3174.00
5 MR
Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250
V clip in type modular switch ISI marked mounted on G.I
moular box with face plate & cover of suitable size including
all accesories and connection on same switch board as per
direction of Engineer in Charge.
SCHOOL Nos. 16 573.00 9168.00
BOYS HOSTEL Nos. 4 573.00 2292.00
GIRLS HOSTEL Nos. 4 573.00 2292.00
STAFF QUARTERS Nos. 8 573.00 4584.00
6 MR
Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5
sq.mm FR PVC insulated single core multistrand copper
conductor of ISI marked in 20 mm dia non-metalic PVC
conduit with 6Amp, 250 V clip in type switch ISI marked
mounted on G.I moular box with face plate & cover of suitable
size , with 1.5 sq.mm FR PVC insulated single core
multistrand copper conductor as earth wire including all
accesories and connection on separate board as per direction
of Engineer in Charge.
SCHOOL Nos. 3 879.00 2637.00
BOYS HOSTEL Nos. 51 879.00 44829.00
GIRLS HOSTEL Nos. 51 879.00 44829.00
STAFF QUARTERS Nos. 5 879.00 4395.00
7 MR
Recessed wiring for 2 x 6 amp socket outlet controlled by 2
nos 6Amp, 250 V clip in type switch ISI marked mounted on
single G.I moular box with face plate & cover of suitable size
including all accesories and connection on separate board as
per direction of Engineer in Charge.
SCHOOL Nos. 15 870.00 13050.00
BOYS HOSTEL Nos. 3 870.00 2610.00
GIRLS HOSTEL Nos. 3 870.00 2610.00
STAFF QUARTERS Nos. 2 870.00 1740.00
8 MR
Recessed wiring for 6 pin 16 amp socket outlet with 16Amp,
250 V clip in type switch ISI marked mounted on G.I moular
box with face plate & cover of suitable size including all
accesories and connection as per direction of Engineer in
Charge.
SCHOOL Nos. 13 750.00 9750.00
BOYS HOSTEL Nos. 8 750.00 6000.00
GIRLS HOSTEL Nos. 8 750.00 6000.00
STAFF QUARTERS Nos. 3 750.00 2250.00
9 MR
Recessed wiring for 6 pin 16 amp socket outlet with 5Amp,
250 V clip in type switch ISI marked mounted on G.I moular
box with face plate & cover of suitable size , with 1.5 sq.mm
FR PVC insulated single core multistrand copper conductor as
earth wire including all accesories and connection as per
direction of Engineer in Charge.
SCHOOL Nos. 10 853.00 8530.00
10 MR
Recessed wiring for A.C/ Power socket outlet with industrial
type socket outlet, plug top and metal chained cover in sheet
steel enclosure ,20A/32A SP MCB including all accesories
and connection as per direction of Engineer in Charge.
SCHOOL Nos. 3 669.00 2007.00
BOYS HOSTEL Nos. 2 669.00 1338.00
Sign and stamp of EPIL 15 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
GIRLS HOSTEL Nos. 2 669.00 1338.00
STAFF QUARTERS Nos. 3 669.00 2007.00
SUBTOTAL 532146.00
SUBMAIN.
11 MR
Recessed wiring to submain in 4 x 10 sq.mm FR PVC
insulated single core multistrand copper conductor of ISI
marked confirming to IS-694/1990 in 40 mm dia non-metalic
heavy duty PVC conduit 1.6 mm thick along with 2 x 6 sq.mm
FR PVC insulated single core multistrand copper conductor as
earth wire as equired. ( For PDB)
SCHOOL Mtrs 40 575.00 23000.00
BOYS HOSTEL Mtrs 55 575.00 31625.00
GIRLS HOSTEL Mtrs 55 575.00 31625.00
12 MR
Recessed wiring to submain in 4 x 6 sq.mm FR PVC
insulated single core multistrand copper conductor of ISI
marked confirming to IS-694/1990 in 32 mm dia non-metalic
heavy duty PVC conduit 1.6 mm thick along with 2 x 4 sq.mm
FR PVC insulated single core multistrand copper conductor as
earth wire as equired. ( For LDB & CDB )
SCHOOL Mtrs 80 354.00 28320.00
BOYS HOSTEL Mtrs 26 354.00 9204.00
GIRLS HOSTEL Mtrs 26 354.00 9204.00
B) MR
Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated
single core multistrand copper conductor of ISI marked
confirming to IS-694/1990 in 25 mm dia non-metalic heavy
duty PVC conduit 1.6 mm thick along with 1 x 4 sq.mm FR
PVC insulated single core multistrand copper conductor as
earth wire as equired. (For DB )
STAFF QUARTERS Mtrs 39 213.00 8307.00
13 MR
Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated
single core multistrand copper conductor of ISI marked
confirming to IS-694/1990 in 20 mm dia non-metalic heavy
duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR
PVC insulated single core multistrand copper conductor as
earth wire as equired. (For AC &POWER SOCKET POINTS )
SCHOOL Mtrs 650 167.00 108550.00
BOYS HOSTEL Mtrs 264 167.00 44088.00
GIRLS HOSTEL Mtrs 264 167.00 44088.00
STAFF QUARTERS Mtrs 78 167.00 13026.00
14 MR
Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC
insulated single core multistrand copper conductor of ISI
marked confirming to IS-694/1990 in 20 mm dia non-metalic
heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5
sq.mm FR PVC insulated single core multistrand copper
conductor as earth wire as equired. (From DB to Switch Board
& 2x5A SOCKET POINTS )
SCHOOL Mtrs 775 135.00 104625.00
BOYS HOSTEL Mtrs 519 135.00 70065.00
GIRLS HOSTEL Mtrs 519 135.00 70065.00
STAFF QUARTERS Mtrs 273 135.00 36855.00
15 MR
Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC
insulated single core multistrand copper conductor of ISI
marked confirming to IS-694/1990 in 20 mm dia non-metalic
heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5
sq.mm FR PVC insulated single core multistrand copper
conductor as earth wire as equired. (For Switch Board
Looping )
SCHOOL Mtrs 110 117.00 12870.00
BOYS HOSTEL Mtrs 638 117.00 74646.00
GIRLS HOSTEL Mtrs 638 117.00 74646.00
STAFF QUARTERS Mtrs 94 117.00 10998.00
SUBTOTAL 805807.00
DB.
MR
Supply and fixing of following way three pole and neutral,
sheet steel, MCB distribution, 415 V on surface / recess,
complete with tinned copper bus bar, neutral bus bar, earth
bar, din bar, hinged front acrylic cover for the MCB knobs
detachable gland plate, interconnections, phosphatized and
powder painted including earthing etc. as required wih
necessary MCB , RCCB / ISOLATORS as required.
16
Supply, fixing, erecting, connecting and commissioning of
indoor type dust and vermin proof, sheet steel clad ready
made, double door horizontal type powder coated wall
mounted 4 way TPN Distribution Boards suitable for 440 V,
three phase, 4 wire 50 Hz AC Supply complete with bottom
detachable plate for interconnections etc as below.Incommer
1 No-25A FP RCCB (100mA) Outgoings-6-32 A SP MCB-
12 Nos, (For GF LDB /CDB,1F LDB/CDB)
Sign and stamp of EPIL 16 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
SCHOOL Nos. 4 7262.00 29048.00
17
Supply, fixing, erecting, connecting and commissioning of
indoor type dust and vermin proof, sheet steel clad ready
made, double door horizontal type powder coated wall
mounted 4 way TPN Distribution Boards suitable for 440 V,
three phase, 4 wire 50 Hz AC Supply complete with bottom
detachable plate for interconnections etc as below.Incommer
1 No-40A FP RCCB (100mA) Outgoings-6-32 A SP MCB-
12 Nos, (For PDB)
MR SCHOOL Nos. 2 7273.00 14546.00
BOYS HOSTEL Nos. 1 7273.00 7273.00
GIRLS HOSTEL Nos. 1 7273.00 7273.00
MR
Supply, fixing, erecting, connecting and commissioning of
indoor type dust and vermin proof, sheet steel clad ready
made, double door horizontal type powder coated wall
mounted 4 way TPN Distribution Boards suitable for 440 V,
three phase, 4 wire 50 Hz AC Supply complete with bottom
detachable plate for interconnections etc as below.Incommer
1 No-25A FP RCCB (100mA) Outgoings-6-32 A SP MCB-
12 Nos, (For GF LDB)
BOYS HOSTEL Nos. 1 7273.00 7273.00
GIRLS HOSTEL Nos. 1 7273.00 7273.00
MR
Supply, fixing, erecting, connecting and commissioning of
indoor type dust and vermin proof, sheet steel clad ready
made, double door horizontal type powder coated wall
mounted 6 way TPN Distribution Boards suitable for 440 V,
three phase, 4 wire 50 Hz AC Supply complete with bottom
detachable plate for interconnections etc as below.Incommer
1 No-40A FP RCCB (100mA) Outgoings-6-32 A SP MCB-
18 Nos,(For 1F L+PDB)
BOYS HOSTEL Nos. 1 8459.00 8459.00
GIRLS HOSTEL Nos. 1 8459.00 8459.00
MR
Supply, fixing, erecting, connecting and commissioning of
indoor type dust and vermin proof, sheet steel clad ready
made, double door horizontal type powder coated wall
mounted 16 way SPN Distribution Boards suitable for 240 V,
Single phase, 2 wire 50 Hz AC Supply complete with bottom
detachable plate for interconnections etc as below.
Incommer 1 No-40A DP RCCB (100mA) Outgoings-6-32 A
SP MCB-12 Nos
STAFF QUARTERS Nos. 2 6886.00 13772.00
MR
Supply, fixing, erecting, connecting and commissioning of
indoor type dust and vermin proof, sheet steel clad ready
made, double door horizontal type powder coated wall
mounted 8 way SPN Distribution Boards suitable for 240 V,
Single phase, 2 wire 50 Hz AC Supply complete with bottom
detachable plate for interconnections etc as below.
Incommer 1 No-25A DP RCCB (100mA) Outgoings-6-32 A
SP MCB-6 Nos
STAFF QUARTERS Nos. 1 4193.00 4193.00
SUBTOTAL 107569.00
PANEL
MR
Supply, installation,testing & commissioning of floor mounting
front operated front access extensible type cubicle panel
totally enclosed, dust and vermin proof with IP-42 /55
protection with hinged and lockabale doors.CRCA sheets
including interconnections,tinned copper crimping lugs,
bonding to earth and painting suitable for use at 415 V,
3phase 4 wire 50 Hz system, and to withstand a fault level of
35 KA symmetrical for 1 sec at 415 V complete as per
specifications, as required and as below : All switchboards
shall have provision for entry of cables from the bottom as
required. All live accessible parts shall be shrouded and all
equipment shall be finger touch proof. The bus bars shall be
insulated with heat shrinkable sleeves.SMC/DMC shrouds
and busbar supports shall be used with Indication lamp, C.T ,
Digital Voltmeter, Digital Ammeter and control fuse etc.
complete.
18
Main Panel(SCHOOL) with 63A 4P MCCB -1 No as incomer
, 40A 4P MCB -3 Nos , 25A 4P MCB -5 Nos & 32A 2P MCB -
3 Nos as Outgoing with E.C Busbars with 1no 65KA VSD
along with 1no 32A 4P MCB .
SCHOOL set 1 92428.00 92428.00
MR
Main Panel(HOSTEL) with 63A 4P MCCB -1 No as incomer ,
40A 4P MCB -3Nos , 25A 4P MCB -2 Nos & 32A 2P MCB -3
Nos as Outgoing with E.C Busbars with 1no 65KA 4P VSD
along with 1no 32A 4P MCB .
BOYS HOSTEL set 1 85972.00 85972.00
GIRLS HOSTEL set 1 85972.00 85972.00
Sign and stamp of EPIL 17 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
MR
PANEL with 40A 4P MCB -1 No as incomer ,5-30A Digital 1
phase energy Meter -3 nos followed by 40A 2P MCB-3 Nos as
Outgoing with Electrolytic Copper Bus Bars.
STAFF QUARTERS set 1 52826.00 52826.00
SUBTOTAL 317198.00
FIXTURE
MR
Supply, Installation, Testing and Commissioning of pre-wired
fluorescent fiiting / compact fluorescent fitting /LED fitting of all
sizes complete with all accessories and lamp etc. directly on
ceiling /wall or recessed in false ceiling , including connection
with 1.5 sq.mm FR PVC insulated single core multistrand
copper conductor and earthing as required.
19
Ceiling/ Wall mounted indoor type BULK HEAD LED
Luminaire with LED Lamp similar to Syska SSK-BH-9W or
equivalent.
SCHOOL Nos 3 1290.00 3870.00
BOYS HOSTEL Nos 3 1290.00 3870.00
GIRLS HOSTEL Nos 3 1290.00 3870.00
STAFF QUARTERS Nos 2 1290.00 2580.00
20 MR
Supply & fixing of Wall / Ceiling mounted indoor type
BATTEN LED Luminaire of Ujalla Scheme ( Energy
Efficiency Services Ltd - EESL)
SCHOOL Nos 98 353.00 34594.00
BOYS HOSTEL Nos 59 353.00 20827.00
GIRLS HOSTEL Nos 59 353.00 20827.00
STAFF QUARTERS Nos 2 353.00 706.00
21 MR
Supply & fixing of 1x9 watt LED lamp of Ujalla Scheme (
Energy Efficiency Services Ltd - EESL ) on existing
Angle/batten holder
SCHOOL Nos 18 112.00 2016.00
BOYS HOSTEL Nos 15 112.00 1680.00
GIRLS HOSTEL Nos 15 112.00 1680.00
22 MR
Supply & fixing of Surface mounted round type indoor type
LED Luminaire with LED Lamp similar to Syska SSK-SDC-
18W-N or equivalent.
SCHOOL Nos 9 1555.00 13995.00
23 MR
Supply , fixing & termination of Outdoor Street Light LED
Luminaire with 25w LED Lamp similar to Syska SSK-SLF-CF-
25W or equivalent.
SCHOOL Nos 4 1868.00 7472.00
BOYS HOSTEL Nos 2 1868.00 3736.00
GIRLS HOSTEL Nos 2 1868.00 3736.00
STAFF QUARTERS Nos 2 1868.00 3736.00
B) MRCeiling mounted indoor type T5 LED Luminaire with LED
Lamp Similar to WIPRO 2XTLED or equivalent.
Nos 9 3209.00 28881.00
Nos 9 3209.00 28881.00
24 MR
Supply, Installation, Testing and Commissioning of ceiling fan
1200mm sweep, including wiring the down rods of standard
length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single
core multiatrand copper conductor etc. as required.
SCHOOL Nos 40 1748.00 69920.00
BOYS HOSTEL Nos 31 1748.00 54188.00
GIRLS HOSTEL Nos 31 1748.00 54188.00
25 MR
Supply, Installation, testing and commissioning of exhaust fan
of 300 mm sweep 900 rpm in the existing opening, including
making the hole to suit the size of the above fan, making good
the damage complete, connection, etc as required.
SCHOOL Nos 18 3316.00 59688.00
BOYS HOSTEL Nos 14 3316.00 46424.00
GIRLS HOSTEL Nos 14 3316.00 46424.00
SUBTOTAL 517789.00
EARTHING
28 MR
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm
thick ISI marked including accessories and providing
masonary with cover plate having loccking arrangement and
watering pipe etc with charcoal and salt as required.
SCHOOL Set 2 6440.00 12880.00
BOYS HOSTEL Set 2 6440.00 12880.00
GIRLS HOSTEL Set 2 6440.00 12880.00
STAFF QUARTERS Set 2 6440.00 12880.00
29 MR
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked
at 0.5 meter below ground level as strip earth electrode
including soldering etc. as required.
SCHOOL Rmt 45 568.00 25560.00
Sign and stamp of EPIL 18 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
BOYS HOSTEL Rmt 38 568.00 21584.00
GIRLS HOSTEL Rmt 38 568.00 21584.00
STAFF QUARTERS Rmt 20 568.00 11360.00
30 MRSupplying and laying 25 mm x 6 mm CU earth strip ISI marked
on surface or in recess for connection etc as required.
SCHOOL Rmt 25 607.00 15175.00
BOYS HOSTEL Rmt 21 607.00 12747.00
GIRLS HOSTEL Rmt 21 607.00 12747.00
STAFF QUARTERS Rmt 12 607.00 7284.00
SUBTOTAL 179561.00
TV & TELEPHONE
31 MR
Recessed wiring to telephone point with clip in type modular
telephone socket (RJ 11) ISI marked mounted on G.I modular
box with face plate & cover of suitable size , including all
accesories and connection as per direction of Engineer in
Charge.
SCHOOL Nos. 2 396.00 792.00
BOYS HOSTEL Nos. 1 396.00 396.00
GIRLS HOSTEL Nos. 1 396.00 396.00
STAFF QUARTERS Nos. 2 396.00 792.00
32 MR
Recessed wiring to LAN point with clip in type modular lan
socket (RJ45) ISI marked mounted on G.I modular box with
face plate & cover of suitable size , including all accesories
and connection as per direction of Engineer in Charge.
SCHOOL Nos. 13 503.00 6539.00
BOYS HOSTEL Nos. 1 503.00 503.00
GIRLS HOSTEL Nos. 1 503.00 503.00
33 MR
Recessed wiring to television point with clip in type modular
television socket ISI marked mounted on G.I modular box
with face plate & cover of suitable size , including all
accesories and connection as per direction of Engineer in
Charge.
SCHOOL Nos. 2 392.00 784.00
BOYS HOSTEL Nos. 3 392.00 1176.00
GIRLS HOSTEL Nos. 3 392.00 1176.00
STAFF QUARTERS Nos. 2 392.00 784.00
34 MR
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x
150 mm x 60 mm deep on surface / recess with suitable size
of phenolic laminated sheet cover in front including cutting the
wall and making good the same in case of recessed conduit
as required.
SCHOOL Nos. 2 157.00 314.00
BOYS HOSTEL Nos. 2 157.00 314.00
GIRLS HOSTEL Nos. 2 157.00 314.00
STAFF QUARTERS Nos. 2 157.00 314.00
35 MR
Supplying and fixing of 25mm PVC conduit along with
accessories in recessed wiring including cutting the wall and
making good the same in case of recessed conduit as
required.
SCHOOL Rmt 370 82.00 30340.00
BOYS HOSTEL Rmt 111 82.00 9102.00
GIRLS HOSTEL Rmt 111 82.00 9102.00
STAFF QUARTERS Rmt 70 82.00 5740.00
36 MR
Supplying and drawing one pair, 0.5 sq.mm FR PVC insulated
coper conductor, unarmoured telephone cable in existing
surface / recessed PVC conduit as required.
SCHOOL Rmt 55 34.00 1870.00
BOYS HOSTEL Rmt 30 34.00 1020.00
GIRLS HOSTEL Rmt 30 34.00 1020.00
STAFF QUARTERS Rmt 39 34.00 1326.00
37 MRSupplying and drawing UTP 4 pair LAN cat-6 cable in the
existing surface / recessed PVC conduit as required.
SCHOOL Rmt 355 52.00 18460.00
BOYS HOSTEL Rmt 30 52.00 1560.00
GIRLS HOSTEL Rmt 30 52.00 1560.00
STAFF QUARTERS Rmt 39 52.00 2028.00
38 MR
Supplying and drawing TV cable RG-6 grade, 0.7 mm solid
copper conductor PE insulated shielded with fine tined copper
braid & protected in the existing surface / recessed PVC
conduit as required.
SCHOOL Rmt 60 28.00 1680.00
BOYS HOSTEL Rmt 94 28.00 2632.00
GIRLS HOSTEL Rmt 94 28.00 2632.00
TOTAL 105169.00
GRAND TOTAL 2565239.00
Sign and stamp of EPIL 19 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
1 ARDry stone pitching 22.5 cm thick including supply of
stones and preparing surface complete.1078.01 SQM 381.02 410746.33
2 AR
Providing and laying in situ five course water proofing
treatment with APP (Atactic Polypropylene) modified
Polymeric memberane over roof consistingof first coat
of bitumen primer @0.40Kg per sqm, 2nd & 4th courses
ofbonding material @ 1.20 kg/sqm, which shall consist
of blown type bitumen of grade 85/25 conforming to IS :
702, 3rd layer of roofing membrane APP modified
Polymeric membrane 2.0 mm thick of 3.00 Kg/ sqm
weight consisting
of five layers prefabricated with centre core as 100
micron HMHDPE film sandwiched on bothsides with
polymeric mix and the polymeric mix is protected on
both side with 20 micron HMHDPE film. 5th, the top
most layer shall be finished with brick tiles of class
designation 10 grouted with cement mortar 1:3 (1
cement : 3 fine sand) mixed with 2% integral water
proofing compound by weight of cement over a 12 mm
layer of cement mortar 1:3 (1 cement : 3 fine sand) and
finished neat (item of laying brick tiles shall be paid for
separately).
2784.95 SQM 294.36 819765.10
3 AR
Providfing and fixing Expandable polystyrene (EPS),Self
Extinguishing (SE) Grade sheets of density 18 kg/m3 to 20
Kg/m3 and size 1000x 500x 50 mm on exterior wall on
smoth surface with adhesive and dowel nails fixed on it.
Application of 2-3 mm base coat of polymerized cementitious
coating over insulation layer reinforced fibre
mesh.Application of 2-3 mm of skin coat of polymerized
cementitious coating over embedded fiber mesh.
1078.01 sqm 1183.60 1275936.55
2506447.98
1 AR Conducting reconnaissance survey, integrated Hydrological &
Geophysical (Electrical Ressistivity method) survey and selection of
potential source for exploration of Ground Water including
selection and recommendation of site for drilling production wells
in selected area.
1.00 Job 8,500.00 8,500.00
2 AR Labour for drilling a perfectly vertical bore hole for a specified dia
for a specified depth below G.L through consolidated and un-
consolidated rocks with down the hole hammer drilling rig or
combination drilling rig (1200 cfm/ 300 psi) as required to suit the
site condition as per the direction of EIC including use of own rigs
with its accessories, T&P & consumables etc. for lowering of
200mm dia PVC/GI pipes for housing fitted with socket and with or
without well screen as per the necessity for soft, medium, hard and
boulder formation (GI/ PVC casing pipes, if required to prevent
collapse of over burden is to be provided by the contractor
including lowering and withdrawing after completion of the Tube
Well).
(a) AR Labour for drilling of 200mm dia & 150mm dia bore from '0' mtr. to
'100' mtr.
75.00 Mtr. 628.60 47,145.00
3 AR Providing & lowering the following size PVC pipes (ASTM) with
or without slotted pipes as per the necessity from 1.00m above
ground level up to required depth and fitting and fixing up in
perfectly vertical position, including cutting, threading pipe and
slotted pipe and supplying and fixing all jointing materials, T&P
etc. complete and keeping the top of the casing pipe threaded
including plugging the tube well to prevent entry of foreign
materials from above. The cost inclusive of pipes, fittings, labour,
consumables, POL, consumables with hire & running charges of
machinaries etc. as per specification & direction of EIC.
(a) AR Lowering of 200mm (8'') dia PVC plastic pipes Sch-80 as per
ASTM-D-1785/2004 upto required depth.
75.00 Mtr. 1,578.30 118,372.50
4 AR Cleaning and developing the tube well using their own compressor
continuously worked till clear and adequate discharge is obtained
from the tube well including supply and use of all necessary
equipment, labour, all consumables, running & hire charges of
machinaries etc. all complete as per the direction of the EIC.
1.00 Job 4,584.40 4,584.40
5 AR Supplying all materials, labour & tools and plant and grouting with
cement slurry for sanitary sealing around the GI/PVC casing pipe up
to 3mtrs below ground level to plug the bore hole including cost of
cement all complete as per specification & direction of the Engineer-
in-Charge.
1.00 Job 2,585.10 2,585.10
Sinking of 200mm x 150mm Dia Production Well - 01 Nos
BORE WELL
MISCELLENEOUS ITEM
Sign and stamp of EPIL 20 Sign and stamp of bidder
Sl. No. Description Of Items Qnty Unit Rate Amount
6 AR Providing all materials required for construction of brick masonry
chamber for encasing the production well with Fly Ash bricks of
size 25cm x 12cm x 8cm having crushing strength not less than
75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite
crusher broken metal of 150mm thick on base & 100mm thick on
top of the chamber, encasing the annular area of casing pipe with
cement concrete 1:2:4 of minimum size 450mmx450mmx1200mm
height including form work, filling the inside cavity with sand, C.C.
1:2:4 on top of the chamber of 50mm thick, 12mm thick cement
plaster 1:4 on outer wall & top surface, earth work excavation in all
kinds of soil/rock including back filling with selected excavated
earth duly watered & rammed with smooth finishing. The height of
chamber should be 450mm from G.L. The cost inclusive of all
materials, labour, T&P etc. complete as per specification &
direction of Engineer-in-charge.
a) Outer size 1400mm x 1400mm x 1200mm ht. chambers 1.00 No. 12,500.00 12,500.00
C) Supply, installation, testing & commissioning of Submersible Pump set with accessories
1 Supply, Installation, testing & commissioning of 3-phase, 50Hz
Submersible pump set of required head & discharge including
HDPE delivery pipes of 10 Kgf/cm2
of material grade P.E.-80,
Suitable size of three core flat cable with Bore bunched copper
conductor insulated sheathed with PVC for Submersible Motor with
voltage grade up to 1100 Volt confirming to IS-694/1990 of
required length, out door control panel & required accessories
suitable for 200x150mm size Production Well with required
earthing & service connection from existing source etc. all complete
as per specification & direction of EIC.
1.00 Job 50,000.00
(Provisional)
50,000.00
Total: 243,687.00
Sign and stamp of EPIL 21 Sign and stamp of bidder
1 2 3
In figures In words In figures In words
1 CIVIL WORKS
SubTotal 20535547.97
2 PH WORK
SubTotal 2819058.00
3 ELECTRICAL WORKS
SubTotal 2565239.00
4 MISCELLENEOUS ITEM
SubTotal 2611582.75
5 BORE WELL
SubTotal 243687.00
Total 28775114.73
Note :- 1. The postion of Bidder will as per Gross Value of their Quoted amount as in Summary Sheet
2.The Bidder has to quote above/At Par/below percentage (%) inclusive of all Taxes & Duties including GST.
3. Bidder has to mention the breakup of cost and levies such as GST and other taxes considered in the quoted prices.
CONSTRUCTION OF UPGRADED HIGH SCHOOL AT GASTIKHOLE, CHAKAPADA, KANDHAMAL, ODISHA
PRICE SCHEDULE
SI. No. DESCRIPTION
ESTIMATED COST
(Rs.)
TO BE QUOTED BY TENDERER
% ( - ) Below / At Par/AboveAMOUNT IN Rs. AFTER ADDING %
(-) BELOW / AT PAR / (+) ABOVE
5= (3 x 4 )4
Sign and Stamp of EPIL Sign and Stamp of Bidder
1 2 3
1 CIVIL WORKS
SubTotal 20535547.97
2 PH WORK
SubTotal 2819058.00
3 ELECTRICAL WORKS
SubTotal 2565239.00
4 MISCELLENEOUS ITEM
SubTotal 2611582.75
5 BORE WELL
SubTotal 243687.00
Total 28775114.73
CONSTRUCTION OF UPGRADED HIGH SCHOOL AT GASTIKHOLE, CHAKAPADA,
KANDHAMAL, ODISHA
BOQ SUMMARY SHEET
SI. No. DESCRIPTION
ESTIMATED COST (Rs.)
Sign and Stamp of EPIL Sign and Stamp of Bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
CIVIL WORKS
1 Site Clearance
ref from
analysis
item no
page no
Clearing and grubbing road land including uprooting
rank vegetation, grass, bushes,shrubs ,sapling and
trees girth up to 300 mm, removal of stumps of trees
cut earlier and disposal of unserviceable material and
stacking of serviceable material to be used or
auctioned, up to a lead of 1000 metres including
removal and disposal of top organic soil not exceeding
150 mm in thickness.
1166.00 sqm 3.87 4509.03
2 i) Surface cutting
ref from
analysis
item no
page no
Earthwork in stoney earth and gravels mixed with
stone and boulder not exceeding 0.014 cum in volume
within 50m initial lead and 1.5 m initial lift including
rough dressing and breaking clods to maximum 5 cm
to 7 cm and lying in layers not exceeding 0.3 m in
depth and as per specification approved by the
department.
514.61 cum 199.55 102692.89
Cutting in disintegrated rock not requiring blasting tobe
removed by pick axes and crow bar sand depositing
materials within 50m lead and 1.5m initial lift including
rough dressing as per direction and specification of the
department, stacking useful materials separately as
ordered.514.61 cum 324.36 166918.11
3 a) Earthwork Excavation for foundation
Earth work in excavation in all kinds of soil by
mechanical means (Hydraullic excavator) / manual
means overareas (exceeding 30 cm in depth, 1.5 m in
width as well as 10sqm on plan) inculding disposal of
excavated earth up to 50 m and lift upto 1.5m with all
lead and lift including shoring, shuttering & dewatering
(if required) with cost of all Labour, Labourcess ,Hire &
Running charges of the water pumps, T & P required
for the work complete asdirected by the Engineer- in-
charge.
i) hard soil 931.32 cum 127.96 119169.67
ii) Soft Rock 99.60 cum 199.6 19875.65
iii) Hard Rock 99.60 cum 1690.20 168343.92
b) Extra for every additional lift of 1.5 m or part there
of in excavation / banking excavated or stacked
materials
Hard soil 68.73 CUM 10.20 701.05
Ordinary /hard rock 68.71 CUM 58.30 4005.79
4 Sand Filling
ref. from
analysis
item no-
15 page
no-10
Supplying & Filling foundation trenches , plinth &
ditches with clean course river sand well watered and
rammed in layers not exceeding 23 c.m. in depth
with all lead and lift including cost, conveyance,
loading, unloading, stacking , royalties and all taxes of
sand,cost & conveyance of water, cost of all
Labour,labour cess,T&P required for the work etc.
complete in all respect as directed by the Engineer- in-
charge. 579.37 cum 273.10 158225.95
5 P.C.C( 1:4:8)
ref. from
analysis
item no-4
page no-
43
Providind and laying of cement concrete of grade 1:4:8
(1 Cement : 4 coarse sand : 8 graded stone aggregate
40 mm nominal size of approved quality from quarry
mixing in concrete mixer,lowering and compacting in
proper thickness ,watering and curing for the required
period.including all cost of labour ,material
,conveyance, royalities and taxes,sundries,T&P etc,but
excluding cost of centering and shuttering all complete
as per the direction of Engineer-In-Charge.143.12 cum 4148.00 593661.76
CONSTRUCTION OF UPGRADED SCHOOL AT GASTIKHOLE, CHAKAPADA,KANDHAMAL,
ODISHA
Sign and stamp of EPIL 1 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
6 BACK FILLING
ref. from
analysis
item no-
14 page
no-10
Filling available excavated earth (excluding rock) in
trenches plinth sides of foundation etc.in layers not
exceeding 20 cm in deepth ,consolidating each
deposited layers by ramming and watering ,lead up to
50 m and lift up to 1.5 mt. etc including cost of all
labour , sundries etc complete in all respect as per the
direction of Engineer-In-Charge. 310.44 cum 71.10 22072.28
7 ANTITERMITE TREATMENT
MR
Supplying, diluting and preparing chemical emulsion
like CHLORPYRIPHOS or other chemicals approved by
Central Insecticides Board or as directed by the
manufacturer and spraying the mixture uniformly by
sprayer as pre-constructional anti termite treatment
and creating a chemical barrier under and around the
column pits, wall trenches, basement excavation, top
surface of plinth filling, junction of walls and floors
along with external perimeter of the building, expansion
joints, surrounding the pipes and conduits etc.
complete at the rate of 7.5 liters (or as directed by the
manufacturer) per sqm on vertical and 5.0 liters per
sqm on horizontal surfaces, 50% of the emulsion to be
filled in the holes made in trenches at 150mm center to
center etc.complete as per IS:6313/1981(Part-II) and
as per the direction of the Engineer-in-charge
including cost of all materials, labour, taxes, etc.
complete.
1141.88 sqm 75.00 85641.00
8 R.C.C.M25
ref. from
analysis
item no-
1(c) page
no-259
Providing, lifting, hoisting and laying Reinforced
cement concrete of M-25 Grade for Footings, plinth
band,beam,column, lintel and slab. with 12mm to
20mm size black hard crusher broken granite chips of
approved quality from approved quarry including mixing
and compacting to proper shape and size, level and
plumbs and finishing the exposed surfaces smooth,
scaffolding, watering and curing for the required period
including cost of all materials with taxes, royalties
transportation, loading and unloading, all labour,
sundries,T&P including hire & running charges of
concrete mixer and vibrator etc completed as per
direction of the Engineer-in-charge, including the cost
for centering and shuttering but excluding cost for
reinforcement bars for the work
8.1 Column base footing 181.90 cum 5369.85 976760.29
8.2 Plinth beam 39.69 cum 5670.31 225036.08
8.3 Column - Gr. Floor 59.49 cum 10490.83 624051.05
8.4 Column - 1st. Floor 37.75 cum 11593.45 437611.02
8.5 Column - 2nd Floor 9.73 cum 12913.96 125641.84
8.6 Lintel - Gr. Floor 9.49 cum 8232.15 78114.02
8.7 Lintel - 1st. Floor 8.07 cum 883.03 7121.89
8.8 Beam -g floor 45.03 cum 10490.83 472446.81
8.9 Beam - 1ST floor 38.42 cum 11593.45 445420.12
8.10 Beam - Terrace floor 3.20 cum 12913.96 41376.75
8.11 Roof slab -G floor 125.40 cum 8554.98 1072763.17
8.12 Roof slab - 1st floor 103.58 cum 9270.43 960220.65
8.13 Roof slab - Head room level 8.49 cum 10126.34 86001.90
8.14 Staircase - Gr. Floor 12.55 cum 9055.45 113677.77
8.15 Staircase - 1st. Floor 10.16 cum 9870.99 100316.86
8.16 Chaja G floor 74.27 SQM 705.20 52375.14
8.17 Chaja 1st floor 38.51 SQM 781.53 30096.66
9 Reinforcement
Sign and stamp of EPIL 2 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
.Providing, fixing TOR Fe-500 reinforcement bars for
RCC work of required diameter of approved quality with
straightening, cutting, bending, binding welding and
joining (if necessary) and tying the grills and placing in
position as required for R.C.C. work and providing fan
hooks, hoisting, lowering and laying including cost,
conveyance and taxes of M.S. Rods or tor steel and
binding wires of 18 to 20 gauge and labour required for
the work for bending, binding and tying the grills in all
heights as per the specification & direction of E-I-C.
(Linear measurements will be taken & quantity will be
calculated on standard weight. Weight of binding wire
will not be considered for measurement.)
Foundation and plinth 199.23 QNTL 5542.59 1104249.94
Ground Floor 298.27 QNTL 5542.59 1653170.03
First Floor 251.40 QNTL 5556.87 1397007.94
Terrace Floor 36.36 QNTL 5571.87 202593.25
10 Fly Ash Brick Masonary (1:6) (superstructure)
ref. from
analysis
item no-3
page no-
73
Brick work with Fly Ash bricks size having crushing
strength not less than 75Kg/cm2 with dimensional
tolerance ±8 percent in cement mortar1:6 in Super
structure including watering curing, cost of carriage,
royalty and taxes of all materials, cost of all labour,
T&P etc complete as per the direction of E.I.C.
Substructure 97.27 Cum 3571.70 347419.26
Ground Floor 292.59 Cum 3605.00 1054786.95
First Floor 298.00 Cum 3778.20 1125903.60
Terrace Floor 90.50 Cum 3977.30 359945.65
11 Fly Ash Brick Masonary (1:4) (in superstructure)
ref. from
analysis
item no-2
page no-
71
Fly ash bricks masonary work using having crushing
strength not less than 3.5 kg /cm2 in cement mortar
1:4) for half brickmasonary (110mm) walls
Ground Floor 30.66 Cum 3779.50 115879.47
First Floor 26.81 Cum 3817.80 102355.22
12 12 mm Plastering
ref. from
analysis
item no-4
page no-
105
Providing 12mm thick cement plaster to the surface of
brick masonary wall with cement mortar (1:6) including
racking out joints, scraping and cleaning the surface
and finishing the plaster surface smooth using wooden
floats only to proper plumbs and level and making
grooves and beads to give required ornamental finish
as per drawings including cost of all materials,
conveyance, loading and unloading, all taxes and
royalities, all labour, scaffolding, watering and curing,
sundries and T&P etc all complete as per direction of
the Engineer- in- charge.
Ground Floor 2706.28 Sqm 102.20 276582.07
First Floor 2271.61 Sqm 105.70 240108.84
Terrace Floor 123.56 Sqm 109.30 13504.73
13 16 mm Plastering
ref. from
analysis
item no-14
page no-
105
Providing 16 mm thick cement plaster to the surface of
brick masonary wall with cement mortar (1:6) including
racking out joints, scraping and cleaning the surface
and finishing the plaster surface smooth using wooden
floats only to proper plumbs and level and making
grooves and beads to give required ornamental finish
as per drawings including cost of all materials,
conveyance, loading and unloading, all taxes and
royalities, all labour, scaffolding, watering and curing,
sundries and T&P etc all complete as per direction of
the Engineer- in- charge.
Ground Floor 1031.40 Sqm 146.20 150791.17
First Floor 928.94 Sqm 149.40 138784.10
Terrace Floor 774.38 Sqm 152.70 118247.78
Sign and stamp of EPIL 3 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
14 6 mm Plastering
ref. from
analysis
item no-27
page no-
109
Providing 6mm thick cement plaster with cement
mortar of (1:4) to ceilings of roof slabs, stairs, landings,
chajja, shelves, columns, beams and lofts etc.
including roughening, scraping and cleaning and
finishing the plastered surface smooth using wooden
floats only to proper plumbs and level, making grooves
and beads to give required ornamental finish as per
drawing including cost of all materials, conveyance,
loading and unloading, all taxes and royalities, all
labour, scaffolding, watering and curing, sundries and
T&P etc all complete as per direction of the Engineer-
in- charge.
Ground Floor 904.27 Sqm 112.10 101368.40
First Floor 729.35 Sqm 114.60 83584.05
Terrace Floor 58.59 Sqm 117.20 6867.25
15 Grading plaster
ref. from
analysis
item no-18
page no-
48
4cm thick grading concrete 1:2:4 on roof slab with 12
mm and down graded size hard crusher broken grinite
chips including watering curing cost of materials add
water proofing compounds for the works etc, complete
as per the specification of the engineer-in-charge.
portico 91.86 Sqm 515.70 47372.20
Terrace Floor 964.86 Sqm 561.00 541286.46
b) Water proofing
AR
Providing and laying water proofing treatment in
sunken portion of wc, bathroom etc by applying cement
slurry mixed with water proofing cement compound as
per direction of Engineer-in-charge.
385.24 Sqm 417.34 160775.43
16 Artificial Stone Flooring
ref. from
analysis
item no-2
page no-
84
Providing and laying 5cm artificial stone flooring with
cement concrete (1:2:4) including punning using 12mm
size hand broken granites chips. Including providing
and fixing glass strips in joints of cement concrete
floors in 1m x 1m grid. 40mm wide and 4 mm thick
including cost of all materials, labours, taxes &
royalities, conveyance, loading and unloading,
sundries, T&P etc. Complete as per the specification &
direction of Engineer- in- charge.
Ground Floor 840.04 Sqm 370.20 310984.54
First Floor 655.11 Sqm 377.40 247236.78
17 Cement Punning for skirting
ref. from
analysis
item no-6
page no-
103
Providing and laying 12mm thick cement plaster (1:4)
over brick work with cement punning in skirting.
Including cost of all materials , labours, taxes &
royalities, conveyance, loading and unloading,
sundries, T&P etc. Complete as per the specification &
direction of Engineer- in- charge.
Ground Floor 84.27 Sqm 136.20 11477.70
First Floor 64.94 Sqm 138.30 8980.87
Sign and stamp of EPIL 4 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
18 Antiskid Ceramic Tile Flooring
ref. from
analysis
item no-16
page no-
91
Providing and laying best quality Anti skid Ceramic
floor tile of size 300mm x 300mm x 8mm of approved
make confirming to IS-15622 specifications in floor
over 20mm thick cement moratar (1:4) to proper slope,
line and level including cutting to required size and
shape, fixing at corners and splays etc.Including
finishing the joints with epoxy based water proofing
grout to match the color and shade of tiles complete as
per the design & drawing with cost of all materials,
labour, conveyance, taxes, T&P etc. All complete as
per the direction of Engineer- in- charge.
Ground Floor 80.20 Sqm 714.20 57278.84
First Floor 103.63 Sqm 720.30 74645.52
23 Glazed Dado
ref. from
analysis
item no-
17 page
no-90
Providing and fixing 1st quality ceramic glazed wall tiles
conforming to IS:15622 (thickness to be specified by
the manufacturer), of approved make, in all colours,
shades except burgundy, bottle green, black of any
size as approved by Engineer- in- charge, in skirting,
risers of steps and dados, over 12mm thick bed of
cement mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm,
including pointing in white cement mixed with pigment
of matching shade complete (Basic cost - 400/sqm)
Ground Floor 356.66 Sqm 650.90 232147.25
First Floor 388.68 Sqm 660.10 256569.76
24 PVC Doors For Toilets
MR
Supplying fitting fixing of P.V.C. door of approved quality
including cost of all materials labour T&P etc complete.
G FLOOR 28.73 SQM 1846.42 53048.42
FIRST FLOOR 26.64 SQM 1846.42 49181.87
25 DOOR FRAME
AR
Supplying fitting and fixing of door frame made of
seasoned sal wood cost of all labour, all taxes and
T&P etc. complete.
1.98 CUM 46685.80 92437.88
26 FLUSH Door
AR
Supplying fitting and fixing of flush door made out of
32mm flush door including cost of all materials, cost of
all fittings (hinges, tower bolt, aldrop, hadle, screw etc.)
and cost of all labour, all taxes and T&P etc. complete.
Ground Floor 40.23 SQM 5395.30 217052.92
First Floor 17.40 SQM 5395.30 93870.69
Second Floor 1.89 SQM 5395.30 10197.12
MS DOOR
Arrived
from epm
rate
Supplying of M.S. Door, Window with grills, Grills,
collapsible gates made out of M.S. Angle frame, M.S.
Flat, Sheet etc of approved section & design,
electrically welded properly with all necessary locking
arrengement, and 1 coat red oxide primer including
cost of all materials, labour T&P, carriage of materials
to site etc. complete.
Ground Floor 782.75 KG 70.20 54948.75
First Floor 616.91 KG 70.20 43307.07
Second Floor 92.04 KG 70.20 6461.13
27 ALUMINIUM Windows
Supplying fitting and fixing ofALUMINIUM SLIDING
WINDOW including cost of all materials, cost of all
fittings WITH GLASS and cost of all labour, all taxes
and T&P etc. complete
AR Ground Floor 43.42 SQM 3169.00 137597.89
First Floor 32.81 SQM 3169.00 103958.98
Sign and stamp of EPIL 5 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
MS WINDOW
M.S Panelled Window double leafed shutter with M.S.
Frame & Grill. Made out of the following materials .
Frame:-35x35x6mm M.S angle ,Shutter style Top &
Bottom rail 25x25x3mm M.S Angle.Window panel :-
1.0mm C.R. sheet. Pannel stiffener covering width of
each leaf:-19x5mm,M.S flat 2 nos on each leaf.Hinges
size:-100mm-4 nos(2 nos. each side) bought out as per
ISS.Hold fast :-35x35x6mm MS Angle 100 mm length
bifurcated at the tip 2 nos. on each side.Handle:-
19x5mm M.S Flat fabricated(inside) Tower bolt :2
nos.as per ISS
Arrived
from epm
rate Ground Floor 1715.62
KG 68.00 116662.16
First Floor 1449.1 KG 68.00 98538.80
28 Arrived
from epm
rate
VENTILATORS
Providing and fixing of Fixed Ventilators of approved
make to be fabricated from roll formed sections made
of pre-painted steel (base steel as per IS-513 of 0.6
mm thick “D” quality, galvanized as per IS-277 with zinc
of 120 Gm/Sq.mtr) with paint specification being with
primer of 5-7 microns and finished paint with polyster
paint (Black /Pearl white/ Chocolate Brown) of 12-16
microns alongwith the alkyd backer at the back of 5-7
microns and the sizes of outer frame being of 46x52
mm and with all vertical and horizontal mullions are of
46x70 mm and fixed beadings are of 18x25 mm.
Accessories / gaskets are to be used as per the
manufacturer’s supply and specification like handle
being made of high grade aluminium powder coated
and with nylon receiver and gasket will be made of
EPDM. All corner brackets are to be made of CRCA
with zinc phosphating. The mullion caps and louvered-
clips should be of glass filled nylon. The sections are to
be cut to length, mitre joined with corner bracket and
frames are fixed to the concrete/masonry walls by
means of self expanding screws and glass to be used
of 5 mm with all taxes complete.
Ground Floor 19.05 Sqm 4412.00 84036.62
ref. from
analysis
item no-
15 page
no-251 First Floor
23.57 Sqm 4414.00 104054.00
2.53 SQM 4414.00 11154.28
29 M.S. Grill
Providing, fitting & fixing M.S grill fabricated from
12mm and 16mm square bars as per approved
drawing and design including cost, conveyance & taxes
of all materials, fabrication charges, fixing in position to
RCC columns / walls in cement concrete (1:2:4) and
making good to the damages complete as per direction
of the Engineer- in- charge. The rates shall be inclusive
of all cost of materials, labour, T&P shuttering etc
complete.
Ground Floor 2521.45 Kg 57.60 145235.37
Arrived
from epm
rate First Floor
2350.76 Kg 57.60 135403.78
B)
Labour charges for fitting, fixing M.S. gates (M.S Door,
Window with grills, Grills, collapsible gates) as per
approved design including cost of all labour, T&P etc.
complete.
312.84 SQM 68.10 21304.40
30 S.S. RAILING
Sign and stamp of EPIL 6 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
Supplying, fitting of stainless steel of 304 grade in hand
railing using 50 mm dia of 2 mm thick circular pipe with
Balustrade of size 32 mmx32 mmx2 mm @0.90 mtr c/c
and stainless square pipe bracing of size 32mm x
32mmx 2 mm in 3 rows in stair case as per approved
design etc complete.
ref. from
analysis
item no-
11 page
no-244 Ground Floor
42.43 Rmt 3209.86 136201.53
First Floor 29.60 Rmt 3209.86 95011.86
31 Synthetic Enamel Paint
ref. from
analysis
item no-3
page no-
93
Painting synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade
with two or more coats on new work over a coat of
suitable shade with primer of approved brand as per
manufacture's specification including cost of all
materials with taxes and transportation , all labour,
scaffolding, sundries, T&P etc. All complete as per the
direction of the Engineer- in- charge.
Ground Floor 211.98 Sqm 130.80 27726.69
First Floor 173.41 Sqm 133.90 23219.41
Second Floor 3.68 SQM 137.04 504.52
32 PUTTY
ref. from
analysis
item no-2
page no-
236
Providing and Finishing wall surface with Acrylic wall
putty (water based) of approved make and finished
smooth & even surface to receive painting including
cost of scaffolding etc. with cost of all materials, labour
T&P etc. complete.
Ground Floor 1945.90 SQM 75.90 147694.06
First Floor 1310.76 SQM 76.80 100666.59
Terrace Floor 75.55 SQM 77.70 5870.24
33 Weather coat
ref. from
analysis
item no-
20 page
no-99
Painting two coats with Water soluble weather coat
paints of approved shade to the outside walls over a
coat of primer by means of rollers to outside surface of
new walls including all cost of materials, scaffolding,
labour, watering & curing T&P etc complete as per
direction of E-I-C.
Ground Floor 45.80 119.20 5459.36
First Floor 45.80 121.10 5546.38
Second Floor 21.00 123.00 2583.00
34 ref. from
analysis
item no-
18 page
no-98
Cement paint
Providing and Finishing the wall surface wth water
proofing Cement paint two coats of approved shade on
new work to give an even shade etc, including all cost
of materials, scaffolding, labour, watering & curing
T&P etc complete as per direction of E-I-C.
Ground Floor 1031.40 Sqm 67.70 69826.01
First Floor 928.94 Sqm 69.00 64097.07
Second Floor 774.38 Sqm 70.40 54516.33
35 ref. from
analysis
item no-7
page no-
46
Plinth protection
Making plinth protection 100mm thick of cement
concrete 1:2:4( 1 cement: 2 coarse sand: 4 graded
stone aggregate) 12 mm well rammed including
finishing the top smooth. 14.93 Cum 4845.39 72355.24
Sign and stamp of EPIL 7 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
36 ref. from
analysis
item no-22
page no-
99
Distemper
Finishing the wall surface wth water proofing Cement
paint two coats of approved shade on new work to give
an even shade etc, including all cost of materials,
scaffolding, labour, watering & curing T&P etc
complete as per direction of E-I-C.
Ground Floor 3610.55 Sqm 45.00 162474.76
First Floor 3000.96 Sqm 46.00 138044.23
Second Floor 182.14 Sqm 46.90 8542.41
TOTAL CIVIL WORK 20535547.97
SAY 20535548
PH WORKS
Sl. No Item of Works Qnty. Unit Rate (In Rs.) Amount (Rs.)
1 Providing all materials, labour, T&P for laying/fixing of following
dia CPVC pipes S.D.R-11 as per IS-15778 with ISI mark
including fixing of required size CPVC fittings like bend, Tee,
elbow, offsets etc. and the same fixed on wall or floor with holder
bat clamps screw in all floor or laying in trenches including
excavation of earth work in all kinds of soil & backfilling the
trenches as per specification & testing the joints with required water
presure.The cost inclusive of all taxes,duties,transportation
scaffolding etc. as per specification and direction of Engineer-in-
charge.
a) MR 20mm dia 343.20 Mtr. 186.70 64,075.44
b) MR 25mm dia 122.80 Mtr. 252.20 30,970.16
c) MR 32mm dia 95.50 Mtr. 371.70 35,497.35
d) MR 40mm dia 93.09 Mtr. 504.40 46,953.38
e) MR 50mm dia 116.65 Mtr. 783.10 91,344.80
2
MR
Providing all materials, labour, T&P for laying/ fixing of following
dia CPVC pipes Sch-80 as per ASTM-F-441 including fixing of
required size CPVC fittings like bend, Tee, elbow, offsets etc. and
the same fixed on wall or floor with holder bat clamps screw in all
floors or laying in trenches including excavation of earth work in all
kinds of soil & backfilling the trenches as per specification &
testing the joints with required water presure.The cost inclusive of
all taxes, duties, transportation, scaffolding etc. as per specification
and direction of Engineer-in-charge.
a) MR 65mm dia 25.00 Mtr. 565.10 14,127.50
3 Providing all materials, labour, T&P for laying/fixing of following
dia uPVC pipes as per IS-4985 with ISI mark of 6 kgf/cm2
including fixing of required size uPVC fittings
like,bend,Tee,elbow,offsets,etc. and the same fixed on wall or floor
with holder bat clamps screw in all floors or laying in trenches
including excavation of earth work in all kinds of soil & backfilling
the trenches as per specification & testing the joints with required
water presure.The cost inclusive of all taxes, duties, transportation,
scaffolding etc. as per specification and direction of Engineer-in-
charge.
a) MR 40mm dia 25.00 Mtr. 42.50 1,062.50
b) MR 50mm dia 25.00 Mtr. 56.30 1,407.50
4 Providing all materials, labour, T&P for fitting & fixing of
following water supply fittings confirming to IS-15778 with ISI
mark as per ASTM D-2846 & fixing with the pipes after cutting the
pipes to required shape & size including wastage etc. of following
nominal diameter, all complete including testing the joints with
required water pressure.The cost inclusive of all
taxes,duties,transportation scaffolding etc. all complete as per
specification and direction of Engineer-in-charge.
a) MR 25mm dia CPVC ball valve 47.00 No. 62.80 2,951.60
b) MR 32mm dia CPVC ball valve 28.00 No. 1,149.00 32,172.00
c) MR 40mm dia CPVC ball valve 19.00 No. 1,734.10 32,947.90
Internal Water Supply & Sanitary Installation.
Sign and stamp of EPIL 8 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
5 Providing all materials labour, T&P for making grooves in
bricks/stone masonary walls vertically or horizontally up to required
depth and width in all floor for laying of pipes and fittings up to
50mm dia, testing the joints with required water pressure and
making good the damages with cement concrete 1:2:4 with 12mm
size h.g.c.b.chips and finished smooth with cement morter (1:4) to
original shape including cost of materials, curing, conveyance, taxes
of all materials etc. all complete as per specification & direction of
EIC.
839.30 Mtr. 143.50 120,439.55
6 Providing all labour,T&P for cutting holes in bricks or stone
masonry wall for taking pipes and making good the damages with
cement concrete 1:2:4 finished smooth with CP 1:4 to original
shape including cost of all materials, curing, conveyance, taxes,
duties etc. all complete as per specification & direction of Engineer-
in-charge.a) MR For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick wall 148.0000 No. 34.80 5,150.40
b) MR For 75mm to 150mm dia pipe to pass in 250mm thick wall 77.0000 No. 147.70 11,372.90
7 Providing all labour,T&P and cutting holes in RCC chajja/roof/floor
for taking pipes through and making good the damages with supply
of all required materials etc. complete as per the direction of the
Engineer-in-charge.
27.0000 No. 114.30 3,086.10
8 Providing all materials, labour & T&P for fitting and fixing of white
glazed vitreous china water closet Indian Pan (450mmx350mm) of
approved make as per IS-2556 with ISI mark fixing on the floor
with 32mm PVC Long flush bend and cement concrete 1:2:4 for
fitting the closet etc. all respect in all floors including cost,
conveyance and taxes of all materials etc. all complete as per
specification and as per direction of EIC.
a) MR Indian Pan (450mmx350mm) 38.00 No. 2,013.90 76,528.20
9 Providing all materials, labour, and T&P for fitting and fixing of
PVC low level cistern complete with all internal fittings of approved
make as per IS-7231 with ISI mark in all floor and providing of
necessary PVC wall plug, screws and 15mm dia PVC water
connecting pipe with union at both end including testing etc. all
complete as per specification & direction of Engineer-in-charge.
a) MR PVC low level Cistern 38.00 No. 1,159.40 44,057.20
10 Providing all materials, labour, and T&P for fitting and fixing of
white glazed vitreous china water closet Squirting Pan
(450mmx350mm) of approved make as per IS-2556 with ISI mark
fixing on the floor with 32mm PVC Long flush bend and cement
concrete 1:2:4 for fitting the closet etc. All respect in all floors
including cost, conveyance and taxes of all materials etc. all
complete as per specification and as per direction of EIC.
a) MR Squirting Pan (450mmx350mm) 12.00 No. 2,013.90 24,166.80
11 Providing all materials, labour, T&P for fitting and fixing of white
glazed vitreous china water closet (European pattern) 'P' or 'S' type
with cistern & seat cover, wash hand basin of size 460mmx360mm
with one pair basin bolt, one no. hinged rail 760mm long & 4 nos.
grab rails 600mm long including supply of sutaible PVC wall plug
and Brass screws etc. suitable for handicapped toilets in all floor
etc. all complete including cost, taxes and conveyance as per
specification all complete as per direction of Engineer-in-charge.
1.00 Set 81,226.40 81,226.40
12 Supply all materials and labour for fitting and fixing of following
size white glazed vitreous china wash hand basin of approved
make in all floor with supply & fixing of basin bolts & Nut of
approved quality including cutting the walls & floor and making
good the damages including testing with all taxes, duties,
transportation etc. all complete as per specification & direction of
EIC. a) MR 630x450mm size WHB 32.00 Set 2,076.50 66,448.00
13 Supply all materials, labour & T&P for fitting and fixing of
following sizes of white glazed vitreous china flat back, lipped front
urinal basin confirming to specification of approved make as per IS-
2556 with ISI mark in all floor along with supply & fixing of
necessary component parts like pair of C.I./M.S. bracket including
connection from existing water supply pipe line & testing the same
with all taxes, duties, transportation etc. all complete as per
specification & direction of the Engineer-in-charge.
a) MR 420x395x635mm size flat back large standing urinal 14.00 Set 3,166.60 44,332.40
14 Providing all materials, labour, T&P for fixing of following sizes of
bevelled edge mirror of 5mm thick mounted on 4mm thick AC
sheet & CP cup screw with PVC wall plugs in all floor including
cost, conveyance, taxes of all materials complete as per specification
and direction of E.I.C.a) MR 600mm x 450mm size 17.00 No. 632.80 10,757.60
Sign and stamp of EPIL 9 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
15 Providing all materials, labour,T&P and fittings and fixing of
different water supply (CP on Brass) fitting (Quarter Turn) as per
IS specification & approved make in all floor of following sizes and
specification with leak proof threaded joints with thread seal tape or
any other method as required and directed including all taxes,
duties, transportation etc., testing and rectification of defects after
testing complete as per direction of Engineer-in-charge.
a) MR 15mm dia Short Body Bibcock with wall flange 44.00 No. 977.90 43,027.60
b) MR 15mm dia Angle Stop cock with wall flange 105.0000 No. 705.10 74,035.50
c) MR 15mm dia Pillar cock 32.0000 No. 1,013.70 32,438.40
d) MR Single Lever Basin Mixer without Pop-up waste 32.0000 No. 2,255.60 72,179.20
e) MR Angle Cock Auto closing system for urinal with CP connection pipe 22.0000 No. 1,595.50 35,101.00
f) MR O.H. Shower of Square shape of size 150mmx150mm with Shower
Arm 20mm dia x 450mm long & Wall Flange.
5.0000 No. 1,150.00 5,750.00
g) MR C.P. Soap Dish Holder 5.0000 No. 481.70 2,408.50
h) MR Towel Ring Square with round flange 5.0000 No. 656.00 3,280.00
i) MR CP Towel Rail of 600mm long 5.0000 No. 970.00 4,850.00
j) MR 600mm long Glass Self 5.0000 No. 905.10 4,525.50
k) MR Single lever High flow Divertor with Button assembly & exposed
parts kit consisting of operating lever, wall flange (with seals) &
Button.
5.0000 Nos. 3,350.00 16,750.00
l) MR Bath Spout with wall flange 5.0000 Nos. 1,007.00 5,035.00
m) MR Health Faucet with 1.00m long PVC tube & wall hook 5.0000 No. 763.90 3,819.50
n) MR 15mm dia sink cock with swivel casted spout (Wall mounted 6.0000 No. 1,091.60 6,549.60
o) MR 32mm dia C.P.waste (Half Threaded) 41.0000 No. 317.50 13,017.50
p) MR 32mm dia C.P. Doom Waste 9.0000 No. 377.00 3,393.00
q) MR C.P. Toilet paper holder with flap 5.0000 No. 820.30 4,101.50
r) MR C.P. Robe Hook 5.0000 No. 425.20 2,126.00
s) MR 150mmx150mm size stainless steel hinged grating 38.00 No. 354.50 13,471.00
t) MR 15mmx50mm C.P. Extension piece 32.00 No. 166.60 5,331.20
u) MR 15mm CP Spreader 14.00 No. 519.00 7,266.00
16 Supply all materials, labour, T&P, fitting and fixing of uPVC SWR
(Ringfit) Pipes (Type-A) of approved make confirming to IS-
13592/1992 with ISI mark, both below & above ground level or
fixing on wall surface in all floors including excavation of earth
work in all kinds of soil & necessary back filling or required
scaffolding with all taxes, duties, transportation including testing
etc. all complete as per specification & direction of the EIC.
a) MR 110mm dia pipe 177.00 Mtr. 220.40 39,010.80
b) MR 75mm dia pipe 53.00 Mtr. 135.80 7,197.40
17 Supplying all materials, labour, T&P, fitting and fixing of following
dia uPVC SWR (Ringfit) fittings of approved make confirming to
IS-14735 with ISI mark with all taxes, duties, transportation &
requisite testing as per specification & direction of EIC.
a) MR 125mm x110mm P-Trap with lip ring 61.0000 No. 434.80 26,522.80
b) MR 110mmx110mm 'P' Trap 26.0000 No. 243.00 6,318.00
c) MR 110mmx75mm Nahani Trap 54.0000 No. 148.10 7,997.40
d) MR 110mm Multifloor Trap 198.0000 No. 156.60 31,006.80
e) MR 110mmx87.5º Plane bend 90.0000 No. 130.90 11,781.00
f) MR 110mmx87.5º door bend 82.0000 No. 150.20 12,316.40
g) MR 110mmx45º Plane Bend 56.0000 No. 122.30 6,848.80
h) MR 110mm Single Tee with Door 120.0000 No. 208.70 25,044.00
i) MR 110mm Double Tee with Door 54.0000 No. 411.20 22,204.80
j) MR 110mm dia single 'Y' 56.0000 No. 224.80 12,588.80
k) MR 110mm WC connector/Bend with lip ring 94.0000 Nos. 181.30 17,042.20
l) MR 110x75mm Reducer 70.0000 Nos. 107.30 7,511.00
m) MR 110mm dia Vent cowl 68.0000 Nos. 48.70 3,311.60
n) MR PVC Clamp Suitable for 110mm dia pipe 365.00 Nos. 72.80 26,572.00
18 Providing all materials, labour, T&P for fitting and fixing of
following size of 12mm thick toughened glass for urinal partition of
approved make in all floor with edge moulding & polishing with
chromium plated brass screws, G/W brackets 90° (Double Sided
Back Plate) of DORMA make with all taxes, duties, transportation
etc. all complete as per specification & direction of Engineer-in-
charge. a) MR Toughened glass partition of Size-1200mm ht. x 600mm width for
Urinal Partition
3.00 No. 8,334.00 25,002.00
19 Providing all materials, labour, T&P for fitting & fixing of
following sizes of Stainless Steel Kitchen Sink made out of 0.8mm
thick sheet with coupling & strainer, the flat boards for correct
sandwitch between the platform top & granite/marble slab &
making good the damages, fixing of 32mm dia PVC waste pipe etc.
including testing, commissing all complete as per specification &
direction of the Engineer-in-Charge.
Sign and stamp of EPIL 10 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
a) MR Stainless Steel Kitchen Sink of overal size-535 x 460 x 200mm . )
of popular range, satin.
6.00 No. 5,115.40 30,692.40
20 Providing, fitting, fixing including testing & commissioning of
following capacity polyethylene moulded water storage cylindrical
tank with lid & locking arrangement as per IS-12701/1996 with ISI
mark including cutting holes of required size & shape. Providing,
fitting and fixing of CPVC water tank connector / Adaptor with jam
nut etc. for filling, delivery, overflow & wash out arrangements,
including hoisting upto a height of 10 mtr. above the ground level
& placing the tank of required position including construction of
brick masonry pedestal up to 450mm ht. from roof with RCC
(M-20) base slab, beam of approved design & 125mm thick brick
masonry wall up to 2/3 ht.of tank (all round) in C.M. 1:4, 12mm
C.P. 1:4 over brick work etc. all complete as per specification &
direction of EIC.
a) MR 5000 Ltr. capacity 3.00 No. 57,830.00 173,490.00
Providing, fitting, fixing including testing & commissioning of
following capacity polyethylene moulded water storage cylindrical
tank with lid & locking arrangement as per IS-12701/1996 with ISI
mark including cutting holes of required size & shape. Providing,
fitting and fixing of CPVC water tank connector / Adaptor with jam
nut etc. for filling, delivery, overflow & wash out arrangements,
including hoisting upto a height of 10 mtr. above the ground level
& placing the tank of required position including construction of
brick masonry pedestal up to 450mm ht. from roof with RCC
(M-20) base slab, beam of approved design & 125mm thick brick
masonry wall up to 2/3 ht.of tank (all round) in C.M. 1:4, 12mm
C.P. 1:4 over brick work etc. all complete as per specification &
direction of EIC.
b) MR 500 Ltr. capacity 2.00 No 24,728.00 49,456.00
Providing all materials, labour, T&P for fitting & fixing of storage
water heater of following capacity & fixed on the wall with bolt &
nut after drilling of suitable bolt holes including supply of clamp,
bolt, washer, wall plug etc. suitable for the water heater. The cost
inclusive of all taxes, duties, transportation, scaffolding etc. all
complete as per specification & direction of EIC.
c) 25 ltr. Capacity 5 star rating Water Heater 2.00 Nos 8,381.00 16,762.00
AR
21 Providing all material, labour, T&P and construction of Gully Trap
chamber of size as mentioned below with 250mm nominal size
flyash Brick having crushing strength not less than 75kg/ sqcm in
CM 1:4 over a bed of 100mm thick C.C. (1:3:6) using 40mm size
HG metal, plastering with 12mm thick cement plaster with cement
punning in cement mortar 1:4 on inner surface and 12mm thick
cement plaster in cement mortar (1:4) on external surface,fitting &
fixing of PVC Gully Trap and pre-cast factory made (SFRC) cover
with frame of opening size 260mmx260mm, moulding and shaping
the channel & benching with C.C (1:2:4) with hard granite chips
12mm size, earth work excavation in all kinds of soil & rock and
filling the cavity of the chamber with excavated & selected earth
levelling the surface around the chamber with disposal of surplus
earth within 50mt lead as per specification, design & drawing
including cost of curing and all taxes, royalty, cost, conveyance etc.
all complete as per specification & direction of EIC.
a) MR Inner size 300mmx300mmx450mm depth Gully Trap chamber 32.00 No. 1,783.00 57,056.00
22 Providing all materials required for construction of inspection
chamber with Fly Ash bricks of size 25cm x 12cm x 8cm having
crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6
with 40mm size hard granite crusher broken metal of 100mm thick,
12mm thick cement plaster 1:3 both in outer & inner surface of the
wall & bottom, earth work excavation in all kinds of soil/rock
including back filling with selected excavated earth duly watered &
rammed. RCC M-20 with 20mm & down size H.G crusher broken
chips having minimum cube strength 200Kg/Sqcm at 28 days
confirming to IS-453/76 & IS-3370 for roof slab of 125mm average
thick with form work as per the requied size including cost for MS
reinforcement as per approved design & drawing & fixing of Pre-
cast factory made manhole cover with frame (SFRC medium duty)
for opening of 500mm including cost of all materials, labour, T&P
etc. complete as per specification & direction of Engineer-in-charge.
a) Inner size 750mm x 750mm x 500mm depth 8.00 No. 8,074.00 64,592.00
Total 1,879,855.88
Say 1,879,856.00
Sign and stamp of EPIL 11 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
1 Earth work :
a)Ref. from
analysis
item no-
1,2,3 page
no-1,2,4
Earth work in all kinds of soil within 50m initial lead & 1.5m initial
lift including dressing, levelling & breaking clods to maximum 5cm
to 7cm & laying in layers not exceeding 0.3m in depth & as per
specification & direction of Department.
65.50 Cum. 138.40 9,065.20
b)
AR
Filling foundation trenches and Plinth with excavated & selected
earth, laying in layers not exceeding 23cm thick well watered &
rammed etc. complete including labour , T&P, lead & lift cost &
conveyance, loading, unloading etc. complete as per specification &
direction of EIC.
63.90 Cum. 76.90 4,913.91
2 Ref. from
analysis
item no-7
page no-
46
Providing all materials,labour,T&P for construction of Cement
Concrete (1:2:4) Pedestal with 12mm size h.g.c.b. chips as per
approved design & drawing for uPVC pipe. The cost inclusive of all
taxes, royality, hire & running charges of all machineries,
Transportation charges with all consumables etc. all complete as per
specification & direction of EIC.a) MR For 160mm dia pipe:- 61.00 Nos. 979.00 59,719.00
b) MR For 110mm dia pipe:- 26.00 Nos. 700.00 18,200.00
3 Providing all materials, labour, T&P and laying of uPVC in standard
lengths suitable for push on joints including lowering the pipes in to
trenches to required depth below G.L, with proper allignment &
gradient, testing, commissioning, de-watering (if required)
including all taxes & duties etc. all complete as per specification &
direction of EIC. (Excluding cost for earth wok, back filling which
will be paid separately).a) MR For 160mm dia pipe:- 61.30 Mtr. 458.20 28,087.66
b) MR For 110mm dia pipe:- 34.80 Mtr. 220.40 7,669.92
4 Providing all materials, labour, T&P required for construction of
RCC M-25 man hole chamber of following sizes having cube
strength 250 Kg/cm2
at 28 days confirming to IS-456/2000 & IS-
3370 at all locations & height using h.g. stone aggregate (Crusher
broken) of 20mm & down size including machine mixing, lifting,
hoisting, conveying, placing in position, mechanical consolidation,
curing, de-watering (if required). The minimum thickness of RCC
base slab, all side walls & roof slab shall be not less than 150mm,
150mm & 125mm (avg.) respectively. The cost shall be inclusive of
rigid, levelled & plumbed centering & shuttering to required slope,
allignment & size for all kinds of RCC work with steel/ ply
centering materials with all bracing, ties, anchorage & supports and
removing the same after required paid & placing
M.S.Reinforcement HYSD bar of required dia including cutting,
bending, straightening of approved quality as per approved design
& drawing & tying the grills for RCC works & placing in position
using binding wires (18 to 20 gauge soft drawn & cold annealed).
PCC 1:3:6 with 40mm size h.g.c.b. metal of 100mm thick,
moulding & shaping the channel & benching with C.C. 1:2:4 with
12mm size h.g.c.b. chips, 12mm thick cement plaster 1:3 with
cement punning on inner wall surface, earth work excavation in all
types of soil/rock including cement concrete cutting as per site
condition, filling the foundation base with sand duly watered &
rammed, providing, fitting & fixing of pre-cast factory made man
hole cover with frame (SFRC heavy duty) for clear opening 560mm
dia, providing, fitting & fixing of poly propylene steel reinforced
man hole steps of approved quality & size in two parallel line of
300mm spacing in vertical wall with centre to centre 375mm
(staggered) etc.all complete as per specification & direction of EIC.
a) AR Manhole chamber of Inner size 800mmx900mmx 900mm depth. 11.00 Nos. 19,360.00 212,960.00
b) AR Extra for every additional depth of 0.10mtr. or part there of manhole
size 800mmx900mm from 900mm depth upto 1500mm depth.
5.88 Mtr. 10,767.00 63,309.40
Total:- 403,925.09
Say :- 403,925.00
Sl. No Item of Works Qnty. Unit Rate (In Rs.) Amount (In Rs.)
1 Earth Work:
a)Ref. from
analysis
item no-
1,2,3 page
no-1,2,4
Earth work in all kinds of soil within 50m initial lead & 1.5m initial
lift including dressing, levelling & breaking clods to maximum 5cm
to 7cm & laying in layers not exceeding 0.3m in depth & as per
specification & direction of Department.
i) Upto 1.50m initial lift 62.00 Cum. 138.40 8,580.80
ii) From 1.50m to 3.00m lift 52.40 Cum. 148.60 7,786.64
External Sewerage Disposal System.
RCC Septic Tank of inner size 5.00x1.60x1.40m
liquid depth of 2 year cleaning interval.
Sign and stamp of EPIL 12 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
b)
AR
Filling foundation trenches and Plinth with excavated & selected
earth, laying in layers not exceeding 23cm thick well watered &
rammed etc. complete including labour , T&P, lead & lift cost &
conveyance, loading, unloading etc. complete as per specification &
direction of EIC.
52.70 Cum 76.90 4,052.63
2 ref. from
analysis
item no-
15 page
no-8
Filling the pipe line trenches with sand including watering &
ramming etc. complete including all labour, T&P, cost of sand,
conveyance, taxes, royality, loading & unloading as per
specification & direction of EIC.
2.20 Cum 271.00 596.20
3
ref. from
analysis
item no-3
page no-
43
Providing and laying plain cement concrete (1:3:6) in foundation
and bottom layers using 40mm size hard black crusher broken
granite metal of approved quality and size from approved quarry
including cost, conveyance, royality, all taxes complete and
providing all labour T&P for machine mixing, lowering, laying and
compacting to proper thickness, watering and curing for the
required period and including dewatering (if required) as per the
specification & direction of Engineer-in-charge.
4.40 Cum 4,509.00 19,839.60
4
ref. from
analysis
item no-1
(d) page
no-260
Providing all materials, labour, T&P for laying R.C.C. M-30
having minimum cube strength of 300 Kg/cm2
at 28 days
confirming to IS 456/79 & IS 3370 for water tank at all location &
height using graded H.G stone aggregate of 20mm & down size
including machine mixing, lifting, conveying, placing in position
mechanical consolidation curing, dewatering (if necessary) &
testing the concrete for water tightness, rectification of defects if any
etc., complete all as per specification & drawing including cost of
all material, labour, machinery hire charges, T&P and all testing
charges (but excluding cost of reinforcement bars, binding wirings,
centering & shuttering etc.) as per the specification & direction of
Engineer-in-charge.
32.23 Cum 5,443.50 175,444.92
5
ref. from
analysis
item no-
10 page
no-53
Providing & making strong, rigid, levelled & plumbed centering &
shuttering to required shape, allignment & size for all kinds of RCC
works with wooden or steel centering materials with all bracing,
ties, anchorage & supports including provision for necessary holes
for P.H. works including cost of nails etc. complete & dismantling
& removing the same after required interval from the date of casting
including cost of all materials with transportation, hire charges,
taxes, loading, unloading all labour, T&P, sundries etc. complete as
per the specification & direction of the Engineer-in-charge.
197.20 Sqm 331.10 65,292.92
6 ref. from
analysis item
no-9.A page
no-52
Cutting, bending, binding, straightening HYSD bars of required
diameter of approved quality as per approved design & drawing &
tying the grill for RCC works & placing in position using binding
wire (18 to 20 gauge, soft drawn & cold annealed) including cost of
all labour, material, sundries, T&P, scaffolding etc. all complete as
per the specification & the direction of Engineer-in-charge.
24.20 Qntl 5,542.80 134,135.76
7
ref. from
analysis
item no-
29 page
no-110
Providing plaster with cement mortar including cement punning/
bitumen painting where required finished smooth over brick work
with waterproofing cement based compound of approved quality
including finishing smooth to proper slope and plane including cost
of all materials with conveyance, royalty, taxes, watering,
scaffolding and curing, all labour and T&P etc. complete as per
specification & direction of EIC.
a) 12mm thick C.P. 1:3 with punning 90.20 Sqm 151.80 13,692.36
8ref. from
analysis
item no-
10 page
no-53
Providing and laying Cement concrete(1:2:4) for A.S. Flooring of
25mm average thick using graded hard granite stone aggregate of
12mm size of approved quality and from approved quarry, laid to
level and slopes, including finishing smooth or checkered with
floating coat of cement punning, watering and curing etc. complete
as per drawings specification and direction of Engineer-in-charge.
20.40 Sqm 243.40 4,965.36
9
ref. from
analysis
item no-7
page no-
44
Providing and laying cement concrete (1:2:4) in foundation and
bottom layers using 12mm size hard black crusher broken granite
chips of approved quality and size from approved quarry including
cost, conveyance, royality, all taxes complete and providing all
labour T&P for machine mixing, lowering, laying and compacting
to proper thickness, watering and curing for the required period and
including dewatering (if required) as per the specification &
direction of Engineer-in-charge.
0.60 Cum 5,680.30 3,408.18
10 Providing, fitting & fixing of following sizes of precast factory
made RCC man hole cover with frame including locking
arrangement. The cost inclusive of all labour, T&P, taxes,
transportation etc. all complete as per specification & direction of
EIC.a) 500mm dia clear opening RCC man hole cover with frame.(medium
duty)
6.00 No. 1,263.00 7,578.00
Sign and stamp of EPIL 13 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
11 Providing, fitting & fixing of Poly Propylene man hole steps of
approved quality & size in two parallel line of 300mm spacing in
vertical walls with centre to centre 375mm (staggered).The cost
inclusive of all labour, T&P, taxes, transportation etc. all complete
as per specification & direction of EIC.
40.00 No. 269.00 10,760.00
12 Providing, fitting & fixing of 110 diax1.80m long UPVC SWR pipe
(Type-A) of approved make confirming to IS-13592/1992 with Vent
Cowl including construction of cement concrete pedestal (1:2:4) of
size 0.30mx0.30mx0.45m ht. The cost inclusive of all labour, T&P,
taxes, transportation etc. all complete as per specification &
direction of EIC.
2.00 No. 590.00 1,180.00
13 Providing, fitting & fixing of 150mm dia S.W. Tee. The cost
inclusive of all labour, T&P, taxes, transportation etc. all complete
as per specification & direction of EIC.
4.00 No. 500.00 2,000.00
14 Providing all labour, T&P for benching & making Channel for inlet
& outlet chamber.
2.00 Job 97.90 195.80
Total :- 459,509.17
Say:- 459,509.00
Sl. No Item of Works Qnty. Unit Rate (In Rs.) Amount (In Rs.)
1 Earth Work:
a) Ref. from
analysis item
no-1,2,3 page
no-1,2,4
Earth work in all kinds of soil within 50m initial lead & 1.5m initial
lift including dressing, levelling & breaking clods to maximum 5cm
to 7cm & laying in layers not exceeding 0.3m in depth & as per
specification & direction of Department.
i) Upto 1.50m initial lift 16.80 Cum. 138.40 2,325.12
ii) From 1.50m to 3.00m lift 15.20 Cum. 148.60 2,258.72
b) AR Filling foundation trenches and Plinth with excavated & selected
earth, laying in layers not exceeding 23cm thick well watered &
rammed etc. complete including labour , T&P, lead & lift cost &
conveyance, loading, unloading etc. complete as per specification &
direction of EIC.
6.00 Cum 76.90 461.40
c) AR Providing all material, labour & T&P for filling the both inner &
outer surface of soak pit with 40mm size hard granite hand broken
metal etc. complete including lead & lift cost & conveyance,
loading, unloading etc. complete as per specification & direction of
EIC.
15.20 Cum 2,132.30 32,410.96
2 ref. from
analysis
item no-
15 page
no-8
Filling the foundation trenches with sand including watering &
ramming etc. complete including all labour, T&P, cost of sand,
conveyance, taxes, royality, loading & unloading as per
specification & direction of EIC.
0.20 Cum 271.00 54.20
3
ref. from
analysis
item no-3
page no-
43
Providing and laying plain cement concrete (1:3:6) in foundation
and bottom layers using 40mm size hard black crusher broken
granite metal of approved quality and size from approved quarry
including cost, conveyance, royality, all taxes complete and
providing all labour T&P for machine mixing, lowering, laying and
compacting to proper thickness, watering and curing for the
required period and including dewatering (if required) as per the
specification & direction of Engineer-in-charge.
0.40 Cum 4,509.00 1,803.60
4ref. from
analysis
item no-2
page no-
71
Providing all material, labour, T&P for Fly ash Brick masonry work
using Fly ash of 25cm X 12 cm X 8 cm size having crushing
strength not less than 75Kg/Sqcm. in cement mortar (1:4) including
cost, conveyance, taxes, royalties, loading and unloading of all
materials and labour and scaffolding, watering, curing T&P etc.,
complete as per the specification & direction of the Engineer-in-
charge. a) Foundation & Plinth 3.00 Cum 3,831.80 11,495.40
5 ref. from
analysis item
no-9A page
no-52
Providing all material, labour, T&P for using Dry Fly ash Brick of
25cm X 12 cm X 8 cm size having crushing strength not less than
75Kg/Sqcm. including cost, conveyance, taxes, royalties, loading
and unloading of all materials and labour and scaffolding, watering,
curing T&P etc., complete as per the specification & direction of
the Engineer-in-charge.
Soak Pit of Inner Dia 1.50m & depth 3.00m
Sign and stamp of EPIL 14 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
a) Foundation & Plinth 3.80 Cum 2,972.50 11,295.50
6 Providing all materials, labour, T&P for laying R.C.C. M-20
having minimum cube strength of 200 Kg/cm2 at 28 days
confirming to IS 456/79 & IS 3370 for water tank at all location &
height using graded H.G stone aggregate of 20mm & down size
including machine mixing, lifting, conveying, placing in position
mechanical consolidation curing, dewatering (if necessary) &
testing the concrete for water tightness, rectification of defects if any
etc., complete all as per specification & drawing including cost of
all material, labour, machinery hire charges, T&P and all testing
charges (but excluding cost of reinforcement bars, binding wirings,
centering & shuttering etc.) as per the specification & direction of
Engineer-in-charge.
0.60 Cum 5,067.70 3,040.62
7 Providing & making strong, rigid, levelled & plumbed centering &
shuttering to required shape, allignment & size for all kinds of RCC
works with wooden or steel centering materials with all bracing,
ties, anchorage & supports including provision for necessary holes
for P.H. works including cost of nails etc. complete & dismantling
& removing the same after required interval from the date of casting
including cost of all materials with transportation, hire charges,
taxes, loading, unloading all labour, T&P, sundries etc. complete as
per the specification & direction of the Engineer-in-charge.
4.00 Sqm 331.10 1,324.40
8 Cutting, bending, binding, straightening HYSD bars of required
diameter of approved quality as per approved design & drawing &
tying the grill for RCC works & placing in position using binding
wire (18 to 20 gauge, soft drawn & cold annealed) including cost of
all labour, material, sundries, T&P, scaffolding etc. all complete as
per the specification & the direction of Engineer-in-charge.
0.60 Qntl 5,542.80 3,325.68
9 Providing plaster with cement mortar including cement punning/
bitumen painting where required finished smooth over brick work
with waterproofing cement based compound of approved quality
including finishing smooth to proper slope and plane including cost
of all materials with conveyance, royalty, taxes, watering,
scaffolding and curing, all labour and T&P etc. complete as per
specification & direction of EIC.
a) ref. from
analysis
item no-3
page no-
102
12mm thick C.P. 1:4 14.00 Sqm 116.10 1,625.40
b) ref. from
analysis
item no-16
page no-
106
12mm thick C.P. 1:4 with punning 10.40 Sqm 138.60 1441.44
c) ref. from
analysis
item no-7
page no-
103
12mm thick C.P. 1:4 with punning and bitumen painting over
wall top.
2.40 Sqm 158.30 379.92
10 Providing, fitting & fixing of following sizes of precast factory
made RCC man hole cover with frame including locking
arrangement. The cost inclusive of all labour, T&P, taxes,
transportation etc. all complete as per specification & direction of
EIC.a) AR 500mm dia clear opening RCC man hole cover with
frame.(Medium duty)
2.00 No. 1,263.00 2,526.00
Total :- 75,768.36
Say:- 75,768.00
Grand
Total
2819058.00
say 2819058
Sign and stamp of EPIL 15 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
Serial
NoDescription of Items Qnty UNIT Unit Rate Total Amount
INTERNAL WIRING.
1 MR
Recessed wiring to light point / first light of group control/ call
bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR
PVC insulated single core multistrand copper conductor of ISI
marked in 20 mm dia non-metalic PVC conduit with 6 Amp,
250 V clip in type switch ISI marked and ceiling rose ISI
marked mounted on G.I modular box with face plate & cover
of suitable size , with 1.5 sq.mm FR PVC insulated single
core multistrand copper conductor as earth wire including all
accesories and connection as per direction of Engineer in
Charge.
SCHOOL 287 Nos. 670.00 192290.00
2 MR
Recessed wiring to secondary light point looped from primary
light point with 1.5sqmm FR PVC insulated single core
multistrand copper conductor of ISI marked with 20mm dia
non-metallic PVC conduit with 1.5sqmm FR PVC insulated
single core multistrand copper conductor for running earth
including 3 plate ISI marked Ceiling rose with all accessories
& connection as per direction of Engineer in charge.
Average Length: 3 mtr
SCHOOL 82 Nos. 354.00 29028.00
3 MR
Recessed wiring to ceiling fan point with 1.5sqmm FR PVC
insulated single core multistrand copper conductor of ISI
marked with 20mm dia non-metallic PVC conduit with 6Amp
250V Modular Switch,Stepped type Moudular Regulator,
Base & Cover with 1.5sqmm FR PVC insulated single core
multistrand copper conductor for running earth including all
accessories & connection as per direction of Engineer in
charge. (Make of wire: finolex/ Anchor/ Havels/L&T/KDK)
Group B
SCHOOL 110 Nos. 1155.00 127050.00
4 MR
Recessed wiring to Twin control light point with 1.5 sq.mm FR
PVC insulated single core multistrand copper conductor of ISI
marked in 20 mm dia non-metalic PVC conduit with 6Amp,
250 V clip in type 2way switch ISI marked and ceiling rose ISI
marked mounted on G.I modular box with face plate & cover
of suitable size , with 1.5 sq.mm FR PVC insulated single
core multistrand copper conductor as earth wire including all
accesories and connection as per direction of Engineer in
Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V
Guard )Group C
SCHOOL 9 Nos 1058.00 9522.00
5 MR
Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250
V clip in type modular switch ISI marked mounted on G.I
moular box with face plate & cover of suitable size including
all accesories and connection on same switch board as per
direction of Engineer in Charge.
SCHOOL 32 Nos. 573.00 18336.00
6 MR
Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5
sq.mm FR PVC insulated single core multistrand copper
conductor of ISI marked in 20 mm dia non-metalic PVC
conduit with 6Amp, 250 V clip in type switch ISI marked
mounted on G.I moular box with face plate & cover of suitable
size , with 1.5 sq.mm FR PVC insulated single core
multistrand copper conductor as earth wire including all
accesories and connection on separate board as per direction
of Engineer in Charge.
SCHOOL 110 Nos. 879.00 96690.00
7 MR
Recessed wiring for 2 x 6 amp socket outlet controlled by 2
nos 6Amp, 250 V clip in type switch ISI marked mounted on
single G.I moular box with face plate & cover of suitable size
including all accesories and connection on separate board as
per direction of Engineer in Charge.
SCHOOL 23 Nos. 870.00 20010.00
8 MR
Recessed wiring for 6 pin 16 amp socket outlet with 16Amp,
250 V clip in type switch ISI marked mounted on G.I moular
box with face plate & cover of suitable size including all
accesories and connection as per direction of Engineer in
Charge.
SCHOOL 32 Nos. 750.00 24000.00
9 MR
Recessed wiring for 6 pin 16 amp socket outlet with 5Amp,
250 V clip in type switch ISI marked mounted on G.I moular
box with face plate & cover of suitable size , with 1.5 sq.mm
FR PVC insulated single core multistrand copper conductor
as earth wire including all accesories and connection as per
direction of Engineer in Charge.
ELECTRICAL WORKS
Sign and stamp of EPIL 16 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
SCHOOL 10 Nos. 853.00 8530.00
10 MR
Recessed wiring for A.C/ Power socket outlet with industrial
type socket outlet, plug top and metal chained cover in sheet
steel enclosure ,20A/32A SP MCB including all accesories
and connection as per direction of Engineer in Charge.
SCHOOL 10 Nos. 669.00 6690.00
SUBTOTAL 532146.00
SUBMAIN.
11 MR
Recessed wiring to submain in 4 x 10 sq.mm FR PVC
insulated single core multistrand copper conductor of ISI
marked confirming to IS-694/1990 in 40 mm dia non-metalic
heavy duty PVC conduit 1.6 mm thick along with 2 x 6 sq.mm
FR PVC insulated single core multistrand copper conductor
as earth wire as equired. ( For PDB)
SCHOOL 150.00 Mtrs 575.00 86250.00
12 MR
Recessed wiring to submain in 4 x 6 sq.mm FR PVC
insulated single core multistrand copper conductor of ISI
marked confirming to IS-694/1990 in 32 mm dia non-metalic
heavy duty PVC conduit 1.6 mm thick along with 2 x 4 sq.mm
FR PVC insulated single core multistrand copper conductor
as earth wire as equired. ( For LDB & CDB )
SCHOOL 132.00 Mtrs 354.00 46728.00
B) MR
Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated
single core multistrand copper conductor of ISI marked
confirming to IS-694/1990 in 25 mm dia non-metalic heavy
duty PVC conduit 1.6 mm thick along with 1 x 4 sq.mm FR
PVC insulated single core multistrand copper conductor as
earth wire as equired. (For DB )
STAFF QUARTERS 39.00 Mtrs 213.00 8307.00
13 MR
Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated
single core multistrand copper conductor of ISI marked
confirming to IS-694/1990 in 20 mm dia non-metalic heavy
duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR
PVC insulated single core multistrand copper conductor as
earth wire as equired. (For AC &POWER SOCKET POINTS )
SCHOOL 1256.00 1256 167.00 209752.00
14 MR
Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC
insulated single core multistrand copper conductor of ISI
marked confirming to IS-694/1990 in 20 mm dia non-metalic
heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5
sq.mm FR PVC insulated single core multistrand copper
conductor as earth wire as equired. (From DB to Switch
Board & 2x5A SOCKET POINTS )
SCHOOL 2086.00 Mtrs 135.00 281610.00
15 MR
Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC
insulated single core multistrand copper conductor of ISI
marked confirming to IS-694/1990 in 20 mm dia non-metalic
heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5
sq.mm FR PVC insulated single core multistrand copper
conductor as earth wire as equired. (For Switch Board
Looping )
SCHOOL 1480.00 Mtrs 117.00 173160.00
SUBTOTAL 805807.00
DB.
MR
Supply and fixing of following way three pole and neutral,
sheet steel, MCB distribution, 415 V on surface / recess,
complete with tinned copper bus bar, neutral bus bar, earth
bar, din bar, hinged front acrylic cover for the MCB knobs
detachable gland plate, interconnections, phosphatized and
powder painted including earthing etc. as required wih
necessary MCB , RCCB / ISOLATORS as required.
16
Supply, fixing, erecting, connecting and commissioning of
indoor type dust and vermin proof, sheet steel clad ready
made, double door horizontal type powder coated wall
mounted 4 way TPN Distribution Boards suitable for 440
V, three phase, 4 wire 50 Hz AC Supply complete with
bottom detachable plate for interconnections etc as
below.Incommer 1 No-25A FP RCCB (100mA) Outgoings-6-
32 A SP MCB- 12 Nos, (For GF LDB /CDB,1F LDB/CDB)
SCHOOL 4 Nos. 7262.00 29048.00
Sign and stamp of EPIL 17 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
17
Supply, fixing, erecting, connecting and commissioning of
indoor type dust and vermin proof, sheet steel clad ready
made, double door horizontal type powder coated wall
mounted 4 way TPN Distribution Boards suitable for 440
V, three phase, 4 wire 50 Hz AC Supply complete with
bottom detachable plate for interconnections etc as
below.Incommer 1 No-40A FP RCCB (100mA) Outgoings-6-
32 A SP MCB- 12 Nos, (For PDB)
0.00
MR SCHOOL 4 Nos. 7273.00 29092.00
MR
Supply, fixing, erecting, connecting and commissioning of
indoor type dust and vermin proof, sheet steel clad ready
made, double door horizontal type powder coated wall
mounted 4 way TPN Distribution Boards suitable for 440 V,
three phase, 4 wire 50 Hz AC Supply complete with bottom
detachable plate for interconnections etc as below.Incommer
1 No-25A FP RCCB (100mA) Outgoings-6-32 A SP MCB-
12 Nos, (For GF LDB)
0.00
BOYS HOSTEL 2 Nos. 7273.00 14546.00
0.00
MR
Supply, fixing, erecting, connecting and commissioning of
indoor type dust and vermin proof, sheet steel clad ready
made, double door horizontal type powder coated wall
mounted 6 way TPN Distribution Boards suitable for 440 V,
three phase, 4 wire 50 Hz AC Supply complete with bottom
detachable plate for interconnections etc as below.Incommer
1 No-40A FP RCCB (100mA) Outgoings-6-32 A SP MCB-
18 Nos,(For 1F L+PDB)
0.00
BOYS HOSTEL 2 Nos. 8459.00 16918.00
MR
Supply, fixing, erecting, connecting and commissioning of
indoor type dust and vermin proof, sheet steel clad ready
made, double door horizontal type powder coated wall
mounted 16 way SPN Distribution Boards suitable for 240 V,
Single phase, 2 wire 50 Hz AC Supply complete with bottom
detachable plate for interconnections etc as below.
Incommer 1 No-40A DP RCCB (100mA) Outgoings-6-32 A
SP MCB-12 Nos
STAFF QUARTERS 2 Nos. 6886.00 13772.00
MR
Supply, fixing, erecting, connecting and commissioning of
indoor type dust and vermin proof, sheet steel clad ready
made, double door horizontal type powder coated wall
mounted 8 way SPN Distribution Boards suitable for 240 V,
Single phase, 2 wire 50 Hz AC Supply complete with bottom
detachable plate for interconnections etc as below.
Incommer 1 No-25A DP RCCB (100mA) Outgoings-6-32 A
SP MCB-6 Nos
STAFF QUARTERS 1 Nos. 4193.00 4193.00
SUBTOTAL 107569.00
PANEL
MR
Supply, installation,testing & commissioning of floor mounting
front operated front access extensible type cubicle panel
totally enclosed, dust and vermin proof with IP-42 /55
protection with hinged and lockabale doors.CRCA sheets
including interconnections,tinned copper crimping lugs,
bonding to earth and painting suitable for use at 415 V,
3phase 4 wire 50 Hz system, and to withstand a fault level of
35 KA symmetrical for 1 sec at 415 V complete as per
specifications, as required and as below : All switchboards
shall have provision for entry of cables from the bottom as
required. All live accessible parts shall be shrouded and all
equipment shall be finger touch proof. The bus bars shall be
insulated with heat shrinkable sleeves.SMC/DMC shrouds
and busbar supports shall be used with Indication lamp, C.T ,
Digital Voltmeter, Digital Ammeter and control fuse etc.
complete.
18
Main Panel(SCHOOL) with 63A 4P MCCB -1 No as incomer
, 40A 4P MCB -3 Nos , 25A 4P MCB -5 Nos & 32A 2P MCB -
3 Nos as Outgoing with E.C Busbars with 1no 65KA VSD
along with 1no 32A 4P MCB .
SCHOOL 1.0000 set 92428.00 92428.00
MR
Main Panel(HOSTEL) with 63A 4P MCCB -1 No as incomer ,
40A 4P MCB -3Nos , 25A 4P MCB -2 Nos & 32A 2P MCB -3
Nos as Outgoing with E.C Busbars with 1no 65KA 4P VSD
along with 1no 32A 4P MCB .
HOSTEL 2.0000 set 85972.00 171944.00
MR
PANEL with 40A 4P MCB -1 No as incomer ,5-30A Digital 1
phase energy Meter -3 nos followed by 40A 2P MCB-3 Nos
as Outgoing with Electrolytic Copper Bus Bars.
Sign and stamp of EPIL 18 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
STAFF QUARTERS 1.0000 set 52826.00 52826.00
SUBTOTAL 317198.00
FIXTURE
MR
Supply, Installation, Testing and Commissioning of pre-wired
fluorescent fiiting / compact fluorescent fitting /LED fitting of all
sizes complete with all accessories and lamp etc. directly on
ceiling /wall or recessed in false ceiling , including connection
with 1.5 sq.mm FR PVC insulated single core multistrand
copper conductor and earthing as required.
19
Ceiling/ Wall mounted indoor type BULK HEAD LED
Luminaire with LED Lamp similar to Syska SSK-BH-9W or
equivalent.
SCHOOL 11 Nos. 1290.00 14190.00
20 MR
Supply & fixing of Wall / Ceiling mounted indoor type
BATTEN LED Luminaire of Ujalla Scheme ( Energy
Efficiency Services Ltd - EESL)
0.00
SCHOOL 218 Nos. 353.00 76954.00
21 MR
Supply & fixing of 1x9 watt LED lamp of Ujalla Scheme (
Energy Efficiency Services Ltd - EESL ) on existing
Angle/batten holder
0.00
SCHOOL 48 Nos. 112.00 5376.00
22 MR
Supply & fixing of Surface mounted round type indoor type
LED Luminaire with LED Lamp similar to Syska SSK-SDC-
18W-N or equivalent.
0.00
SCHOOL 9 Nos. 1555.00 13995.00
23 MR
Supply , fixing & termination of Outdoor Street Light LED
Luminaire with 25w LED Lamp similar to Syska SSK-SLF-CF-
25W or equivalent.
0.00
SCHOOL 10 Nos. 1868.00 18680.00
B) MRCeiling mounted indoor type T5 LED Luminaire with LED
Lamp Similar to WIPRO 2XTLED or equivalent.
18 Nos. 3209.00 57762.00
24 MR
Supply, Installation, Testing and Commissioning of ceiling fan
1200mm sweep, including wiring the down rods of standard
length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single
core multiatrand copper conductor etc. as required.
0.00
SCHOOL 102 Nos. 1748.00 178296.00
25 MR
Supply, Installation, testing and commissioning of exhaust fan
of 300 mm sweep 900 rpm in the existing opening, including
making the hole to suit the size of the above fan, making good
the damage complete, connection, etc as required.
0.00
SCHOOL 46 Nos. 3316.00 152536.00
SUBTOTAL 517789.00
EARTHING
28 MR
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm
thick ISI marked including accessories and providing
masonary with cover plate having loccking arrangement and
watering pipe etc with charcoal and salt as required.
SCHOOL 8 set 6440.00 51520.00
29 MR
Supplying and laying 25 mm x 6 mm CU earth strip ISI
marked at 0.5 meter below ground level as strip earth
electrode including soldering etc. as required.
SCHOOL 141 Rmt 568.00 80088.00
30 MRSupplying and laying 25 mm x 6 mm CU earth strip ISI
marked on surface or in recess for connection etc as required.
SCHOOL 79 Rmt 607.00 47953.00
SUBTOTAL 179561.00
TV & TELEPHONE
Sign and stamp of EPIL 19 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
31 MR
Recessed wiring to telephone point with clip in type modular
telephone socket (RJ 11) ISI marked mounted on G.I modular
box with face plate & cover of suitable size , including all
accesories and connection as per direction of Engineer in
Charge.
SCHOOL 6 Nos. 396.00 2376.00
32 MR
Recessed wiring to LAN point with clip in type modular lan
socket (RJ45) ISI marked mounted on G.I modular box with
face plate & cover of suitable size , including all accesories
and connection as per direction of Engineer in Charge.
SCHOOL 15 Nos. 503.00 7545.00
33 MR
Recessed wiring to television point with clip in type modular
television socket ISI marked mounted on G.I modular box
with face plate & cover of suitable size , including all
accesories and connection as per direction of Engineer in
Charge.
SCHOOL 10 Nos. 392.00 3920.00
34 MR
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x
150 mm x 60 mm deep on surface / recess with suitable size
of phenolic laminated sheet cover in front including cutting the
wall and making good the same in case of recessed conduit
as required.
SCHOOL 8 Nos. 157.00 1256.00
35 MR
Supplying and fixing of 25mm PVC conduit along with
accessories in recessed wiring including cutting the wall and
making good the same in case of recessed conduit as
required.
SCHOOL 662 Rmt 82.00 54284.00
36 MR
Supplying and drawing one pair, 0.5 sq.mm FR PVC insulated
coper conductor, unarmoured telephone cable in existing
surface / recessed PVC conduit as required.
SCHOOL 154 Rmt 34.00 5236.00
37 MRSupplying and drawing UTP 4 pair LAN cat-6 cable in the
existing surface / recessed PVC conduit as required.
SCHOOL 454 Rmt 52.00 23608.00
38 MR
Supplying and drawing TV cable RG-6 grade, 0.7 mm solid
copper conductor PE insulated shielded with fine tined copper
braid & protected in the existing surface / recessed PVC
conduit as required.
SCHOOL 248 Rmt 28.00 6944.00
TOTAL 105169.00
GRAND TOTAL 2565239.00
MISCELLENEOUS ITEM
1 AR
Dry stone pitching 22.5 cm thick including supply of
stones and preparing surface complete. 1078.33 SQM 381.02 410866.61
2 AR
Providing and laying in situ five course water proofing
treatment with APP (Atactic Polypropylene) modified
Polymeric memberane over roof consistingof first coat
of bitumen primer @0.40Kg per sqm, 2nd & 4th
courses ofbonding material @ 1.20 kg/sqm, which shall
consist of blown type bitumen of grade 85/25
conforming to IS : 702, 3rd layer of roofing membrane
APP modified Polymeric membrane 2.0 mm thick of
3.00 Kg/ sqm weight consisting of five layers
prefabricated with centre core as 100 micron HMHDPE
film sandwiched on bothsides with polymeric mix and
the polymeric mix is protected on both side with 20
micron HMHDPE film. 5th, the top most layer shall be
finished with brick tiles of class designation 10 grouted
with cement mortar 1:3 (1 cement : 3 fine sand) mixed
with 2% integral water proofing compound by weight of
cement over a 12 mm layer of cement mortar 1:3 (1
cement : 3 fine sand) and finished neat (item of laying
brick tiles shall be paid for separately).
2954.80 SQM 294.36 869762.68
3 AR
Providfing and fixing Expandable polystyrene (EPS),Self
Extinguishing (SE) Grade sheets of density 18 kg/m3 to 20
Kg/m3 and size 1000x 500x 50 mm on exterior wall on
smoth surface with adhesive and dowel nails fixed on it.
Application of 2-3 mm base coat of polymerized
cementitious coating over insulation layer reinforced fibre
mesh.Application of 2-3 mm of skin coat of polymerized
cementitious coating over embedded fiber mesh.
1124.50 sqm 1183.60 1330953.47
2611582.75
Sign and stamp of EPIL 20 Sign and stamp of bidder
Sl. No. SOQ NO Description Of Items Qnty Unit Rate Amount
Sl. No Item of Works Qnty. Unit Rate (Rs.) Amount (Rs.)
1
AR
Conducting reconnaissance survey, integrated Hydrological &
Geophysical (Electrical Ressistivity method) survey and selection of
potential source for exploration of Ground Water including
selection and recommendation of site for drilling production wells
in selected area.
1.00 Job 8,500.00 8,500.00
2
AR
Labour for drilling a perfectly vertical bore hole for a specified dia
for a specified depth below G.L through consolidated and un-
consolidated rocks with down the hole hammer drilling rig or
combination drilling rig (1200 cfm/ 300 psi) as required to suit the
site condition as per the direction of EIC including use of own rigs
with its accessories, T&P & consumables etc. for lowering of
200mm dia PVC/GI pipes for housing fitted with socket and with or
without well screen as per the necessity for soft, medium, hard and
boulder formation (GI/ PVC casing pipes, if required to prevent
collapse of over burden is to be provided by the contractor including
lowering and withdrawing after completion of the Tube Well).
(a)AR
Labour for drilling of 200mm dia & 150mm dia bore from '0' mtr. to
'100' mtr.
75.00 Mtr. 628.60 47,145.00
3 Providing & lowering the following size PVC pipes (ASTM) with
or without slotted pipes as per the necessity from 1.00m above
ground level up to required depth and fitting and fixing up in
perfectly vertical position, including cutting, threading pipe and
slotted pipe and supplying and fixing all jointing materials, T&P etc.
complete and keeping the top of the casing pipe threaded including
plugging the tube well to prevent entry of foreign materials from
above. The cost inclusive of pipes, fittings, labour, consumables,
POL, consumables with hire & running charges of machinaries etc.
as per specification & direction of EIC.
(a)AR
Lowering of 200mm (8'') dia PVC plastic pipes Sch-80 as per
ASTM-D-1785/2004 upto required depth.
75.00 Mtr. 1,578.30 118,372.50
4
AR
Cleaning and developing the tube well using their own compressor
continuously worked till clear and adequate discharge is obtained
from the tube well including supply and use of all necessary
equipment, labour, all consumables, running & hire charges of
machinaries etc. all complete as per the direction of the EIC.
1.00 Job 4,584.40 4,584.40
5
AR
Supplying all materials, labour & tools and plant and grouting with
cement slurry for sanitary sealing around the GI/PVC casing pipe up
to 3mtrs below ground level to plug the bore hole including cost of
cement all complete as per specification & direction of the Engineer-
in-Charge.
1.00 Job 2,585.10 2,585.10
6 Providing all materials required for construction of brick masonry
chamber for encasing the production well with Fly Ash bricks of
size 25cm x 12cm x 8cm having crushing strength not less than
75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite
crusher broken metal of 150mm thick on base & 100mm thick on
top of the chamber, encasing the annular area of casing pipe with
cement concrete 1:2:4 of minimum size 450mmx450mmx1200mm
height including form work, filling the inside cavity with sand, C.C.
1:2:4 on top of the chamber of 50mm thick, 12mm thick cement
plaster 1:4 on outer wall & top surface, earth work excavation in all
kinds of soil/rock including back filling with selected excavated
earth duly watered & rammed with smooth finishing. The height of
chamber should be 450mm from G.L. The cost inclusive of all
materials, labour, T&P etc. complete as per specification &
direction of Engineer-in-charge.
a)
AR
Outer size 1400mm x 1400mm x 1200mm ht. chambers 1.00 No. 12,500.00 12,500.00
C) Supply, installation, testing & commissioning of Submersible Pump set with accessories
1
AR
Supply, Installation, testing & commissioning of 3-phase, 50Hz
Submersible pump set of required head & discharge including
HDPE delivery pipes of 10 Kgf/cm2
of material grade P.E.-80,
Suitable size of three core flat cable with Bore bunched copper
conductor insulated sheathed with PVC for Submersible Motor with
voltage grade up to 1100 Volt confirming to IS-694/1990 of
required length, out door control panel & required accessories
suitable for 200x150mm size Production Well with required
earthing & service connection from existing source etc. all complete
as per specification & direction of EIC.
1.00 Job 50,000.00
(Provisional)
50,000.00
Total: 243,687.00
BORE WELL
Name of the work:
Sinking of 200mm x 150mm Dia Production Well - 01 Nos
Sign and stamp of EPIL 21 Sign and stamp of bidder