gdk adm pro manual1

7/31/2019 GDK Adm Pro Manual1

1/24

AdminPro

General Description

Overview

Connection to GDK System

Installation

How to Program

Grid Panel

MenuFile

Edit

AdminView

Help

GDK Admin Program

Numbering Plan (PGM 01)

Slot Assignment (PGM 02)

MSN Table (PGM 03)

Flexible DID Table (PGM 05)

ISDN - System Attribute (PGM 08)

COLP Table (PGM 09)ISDN - Station Attribute (PGM 23)

ISDN - CO Attribute (PGM 37)

Emergency Service Table (PGM 06)

ICM Tenancy (PGM 16)

System Attribute 1 (PGM 40, 41, 42, 45, 46)

Exec-Sec Pairs

System Attribute 2 (PGM 50, 51, 52, 53)

Authorization Code (PGM 54)

System Attribute 3 (PGM 55, 56, 57, 58, 62, 63)

TIE Routing Table (PGM 65)

System Gain Control (PGM 66)

System Speed Zone (PGM 67)

Tone Cadency, Frequency (PGM 68, 69)

World Time Attribute (PGM 71)

World Time (PGM 72)

Voice Mail Dialing Table (PGM 73)

CO Line Name (PGM 74)

Ring Frequency (PGM 75, 76)

DCO TX Gain (PGM 77)

Digit Insert Table (PGM 78)

LCR - Day of Week (PGM 07)

LCR - Time of Day (PGM 07)

LCR - Leading Digit Table (PGM 07)


2/24


3/24

PC Requirement

- PC OS : Windows 95 or Windows 98

- PC Memory : Minimum 16M bytes (32 Mbytes recommended)

- PC Free Disk Space : Minimum 10Mbytes (larger than 20 M Bytes recommended)

- PC Monitor Resolution : VGA or higher

Version Compatibility

GDK AdminPro supports currently GDK '99A series. But, it will also support '98 FEB version, in nearfeature.

Connection to GDK System

The GDK ADMIN Pro has no method to connection to GDK system. So, when a user wants toup/download ADMIN database to GDK system it is necessary to use GDK ADMIN. Mediation betweenGDK ADMIN and GDK ADMIN Pro is a user file, named "USR". User file is currently using GDK ADMINand contains ADMIN database information. GDK ADMIN Pro makes or reads a user file. GDK ADMINsends a user file to GDK system and receives a user file.


4/24


5/24

There are two types to program GDK Admin. One is "Input Box" type, the other is "Combo Box" one.

For your understanding, refer to figure. You can see both "Input Box" and "Combo Box".

Grid Panel

Grid is combination of row and columns.

Generally, row represents order of Station, CO, BIN, and Flexible Button, etc. And, column representseach field information.

Refer to the following figures. Column represents a series of stations and row is its attributes.


6/24

File

New

Open

Save

Save As

Export To Excel

Print

Print Preview

Print SetupRecent File

Exit

New

This menu is for making a new database file of GDK system. You must select a system, version, andnation.

(Currently not available)


7/24

Open

This menu is for opening an existed database file to download from GDK system. Usually, its extendedname is "USR".

After selecting a file, system will analyze its system, version, and nation.

Save

This is menu for flushing some modified value in current grid control to database file.

If you don't have this menu after modifying some value, there will be no change for an user databasefile.

Save As

This menu is for saving as an another name. If there is a duplicated file, you can choice whetheroverwriting or canceling.

Export To Excel

You can export your items in grid panel to Excel 97 format file. All information in current grid panel to beviewed is exported. But, header is not exported.

Print

This menu is for printing all items in current grid panel. Also, according to size of row and column, it canautomatically determine if the way of printing is normal or landscape mode.


8/24

Print Preview

This menu is for previewing a layout to be printed


Print Setup

This menu is for setup for print. It is common interface of Windows 95 or 98.

Recent File

This menu is for opening one of recent files.


Exit

This menu is for exiting this program.

Edit

Undo

Copy

Cut

Paste

Move

Undo

This menu is for undoing previous command.


Copy

This menu is for copying some value in a row or column to clip board.


Cut

This menu is for cutting some value in a row or column. According to the characteristics of program


9/24

field, one is deleted and the other is set to default.


Paste

This menu is for pasting some value in a row or column from clipboard.


Move

This menu is for moving a column to another column or columns. When it is selected, you will see inputrange dialog box. Then, you input ranges (Station, CO, BIN, Hunt Group Number, Flexible Buttons, etc)

that you want, and all items in current column are moved to destinations.

Admin

This menu is dynamically created after database is opened. Configuration information determines whatAdmin menu creates.

You can program GDK Administration according to your selection in this menu.

See the figure.


10/24

View

Toolbar

Status Bar

Toolbar

If this menu is checked, toolbar will be visible.

Status Bar

If this menu is checked, status bar will be visible.

Help

Help Topics

About AdminPro

Help Topics

You can see a help message using this menu.

About AdminPro

You can see information of this application.

Numbering Plan

Admin Feature is designed for change "Numbering Plan" or "Station Logical Number"."Station Port Number" is as following:

Port 0-191 (GDK186)

Port 0-135 (GDK100)

Port 0-77 (GDKFPII)

"Numbering Plans" are

Station Group Pilot Number assign

SLT Program mode select number

Internal Page Zone Numbers

Internal All Call Page Number

Meet Me Page Number

External Page Zone 1 Number

External Page Zone 2 Number (Not on FPII)


11/24

External All Call Page Number

All Call Page Number

SMDR Account code Enter Number

Flash Command To CO Number

SLT Last Speed Dial

Do Not Disturb Number

Call Forward Number

Speed Dial Program Number

Message Wait Enable Number

Message Wait Return Number

Speed Dial Access Number

DND/FWD Cancel Number

Call Park Location Numbers

Alarm Reset Number

Group Call Pick up Number

Station DVU NumberNight Answer

Directed Call Pick-Up

CO Group Access [01-48:GDK186 01-24:GDK100 01-09:FPII]

CO Line Access [01-96:GDK186 01-48:GDK100 01-34:FPII)

Tie Routing Access

Retrieve Held CO Group

Retrieve Held CO Line

Access to Co Line in the 1st CO

ICM Call To Attendant Station

Print SMDR Station Base (ATD)

Print SMDR Account Group Base (ATD)

Delete SMDR Station Base (ATD)

Delete SMDR Account Group Base

Display Call Charge On LCD (ATD)

Abort Printing SMDR (ATD)

Door Phone Relay 1

Door Phone Relay 2

Door Phone Relay 3 (Not FPII)

Door Phone Relay 4 (Not FPII)

VM Message wait Enable

VM Message Wait Cancel (New topic text goes here.)

Slot Assignment

This menu consist of two part, Station and CO Slot assignment.

Maximum number of slot is as following:

GDK 186 : 17

GDK 100 : 12

GDK FPII : 8


12/24


13/24

Max digit in a bin no is 10

ISDN - Station Attribute

The menu supports as following:

Sub Addressing Enable (No/Yes)

Long / short configure (No/Yes)

MSN (No/Yes)

CO ATD or EXT

Progress Indicator

CO Message Wait

Station base CLIP

Station base COLP

Station base CPNStation base CLIR

ISDN - CO Attribute

The available entries are

COLP : input 2 digits

00 : Not assign

01-10: according to COLP table(PGM 09) bin no

11 : according to Extension No

DID RN : DID ignore digit No 2 digits00-99 (00 is default)

Emergency Service Table

User can input 10 bin no. Each bin no support max 5 digits.

ICM Tenancy

1. Group Attendant(STA No.)

2. Access Group No. in Sub menu

Access Group is 1-5 (GDK common) and 6-10(GDK 162).

System Attribute 1

HOLD Preference (System/Exclusive)

Auto Privacy (Yes/No)

Privacy Warning Tone (Yes/No)

Page Warning Tone (Yes/No)


14/24


15/24

In each entry, max 5 digit can be entered

When you input in ASCII, corresponding Numeric Data appears (ex: ABC ->"122223")

System Attribute 3

DID DIGIT CONVERSION - In this Program, User can program as following:

Receive Count : 2-4 (3: default)

Conversion : allow 0-9, "#", "*" (default"#***")

2nd Conversion: allow 0-9, (default "1234567890")

DID/DISA DESTINATION - In this Proram, User can program for incomming call

Busy_destination

Error_destination

PULSE DIAL SPEED RATIO - In this Proram, User can program

10 PPS 60/40 %10 PPS 66/33 %

20 PPS 60/40 %

20 PPS 66/33 %

MODEM ASSIGN - This attribute is for MODU

The available entries are

Modem : use MODU as "modem" or "by pass"

BAUD : MODU baud rate. for MODU 2400bps fixed.

Associate Device : Allow dumy station such as "STAxxx" (2xxx within 5 dgt)

or dedicated CO line (1xx with 3 dgt)

LCD DISPLAY MODE - The available entries are

12/24 Hour

DDMMYY/MMDDYY

SMDR Attribute I - The available entries are

SMDR SAVE

SMDR PRINT ENABLE

LONG DISTANCE/ALL CALL RECORD

PRINT INCOMING CALL

RECORD IN DETAIL

BAUD RATE : Setting GDK SMDR baud rate

available Baud are

1:300 baud

2:600 baud

3:1200 baud4:2400 baud

5:4800 baud

6:9600 baud

SMDR CURRENCY UNIT 3 characters

SMDR Attribute II - This entry is for SMDR COST Unit change

COST : 6 digits

FRACTION : 1 digit

Tie Routing Table

TIE LINE ROUTING - This is TIE Routing table (CO Number)


16/24

System Gain Control

This feature can change System Gain control on "DKTU", "EKTU", "SLT", "COL", "DVU", "DTMFReceiver", "External Page", "MODU", "CPT rx level', "DCO(ISDN CO or CEPT)", "WTIB", and "R2DCO".

Input Range : 00-63

System Speed Zone

User can device external page zone into 10 zone no. The available zone range is

400-999 : GDK186

300-399 : GDK100/FPII

Note that the overlapped zone range in zone number is not allowed. The Station range means allowedto access that speed zone and the overlapped station range in zone number is not allowed. The maxstation range depent on system.

Tone Cadency, Frequency

ACNR TONE CADENCE - Ring back tone, Busy tone, Error tone and secondary dial tone can beprogrammed for ACNR.

SYSTEM TONE FREQUENCY - Frequency, user entered (dial tone, ring back tone, error tone, busytone), may change to the closest System frequency that provides.

World Time Attribute

1. Display World time or not

2. Temperature type (C/F)

3. ISD Code length : determine the length of ISD code

4. ISD code

World Time

This is world time attributes

- Nation : input within 3 digits

- Area : input within 4 digits

- Time : input time range [00-23], when restore to defalut press '00'

- Temperature : Press desired Month with flex button, and then input 3 digits within 255 for averagetemperature.

Voice Mail Dialing Table

Input digits up to 12 digits.


17/24


18/24

Input 4 is Zone 1 (max 6 digits).



LCR - Digit Modification Table

Input 1 is assigned to change Bin no (max 100)

Input 2 is A(Added Digits) up to 16 digits

Input 3 is RP(Removal Position) (01-12)

Input 4 is RN(Removal Digit No) (00-12)

Input 5 is AP (Add Position)

Input 6 is C(CO Group)

Input 7 is ALT DMT Index[0-99(with MEMU)].

Station Attribute 1

DND ( Do-Not-Disturb )

Speed Dial Access

Page Access

Call Forward Access

PLA (Preferred Line Answer)

Auto Speaker Select

Warm Line

SMDR Dial Digit Hidden DisplayCO Line Queuing

3-Minute Warning Tone

Override Priviledge

Automatic CO Hold(is Attendant?)

Data Line Security

Group Listening

Speaker-Phone/Headset

Howling Tone To SLT

Alarm/Door Bell Signaling

ICM Box Signaling

CO Individual Access

No Touch Answer

DVU Access

Voice over

Suppress Rx Data connected DM

Prepaid Call

STATION ID ASSIGN 18 consist of type and value

Keyset

DSS MAP 1 : assigned station number

DSS MAP 2 (Not on FPII) : assigned station number

DSS MAP 3 (Only on GDK186) : assigned station number

DSS MAP 4 (Only on GDK186) : assigned station number

DLS MAP 1 : assigned station number


19/24


20/24

Type is one of Empty, CO Line, CO Group, Loop, program feature, Speed, etc.

Value is associated one of each type.

CO Attribute 1

CO Line Group Assign

Coline COS

CO Line Group Account

DISA: for DISA input "03",

for DVU announce "02"

default is "00"

DISA Account Code

COL Name Bin No.: 00 is not assignCO/PABX

DTMF/Pulse

Universal Night Answer(UNA)

Flash type(Ground/LOOP)

Metering Type (No:0,50Hz:1,12k:2,16k:3,S-pol:4,p-pol:5)

Voice/Data For CEPT(is VOICE?)

Line Drop using CPT

Incomming call Night DVU

CO Attribute 2

FLASH TIMER - The available range is 00-30 (100msec unit)

OPEN LOOP DETECT - The available range is 00-20 (100msec unit)

CO/TIE LINE ASSIGN - The available entries are

Normal Ring

Ring/Down

Loop/Dial

Ear/Mouth Continuous

Polarity Reverse

Ear/Mouth Discontinuous

DID Line For Digital CO Line

DID LINE ASSIGN - The available entries are

Immediate Start

Wink Start

Delayed Dial Start

Note that it is not available in GDK FPII

RING(0-4)

MOH(0-4)

Dial Tone

In Signal : 0:Pulse 1:DTMF (Only GDK 186)

Out Signal: 0:Pluse 1:DTMF (Only GDK 186)

B Signal : 0:Charge 1:Free 2-9: Option (Only GDK 186)


21/24

Station Ring Assign - Ring Mode

You can choose one of as following lists:

Not assign

Day

Night

Both

Station Ring Assign - Ring Count

You can choose one of 0-9

Station On Demand Ring Assign

You can choose one of 0-9 and Empty.

Hunt Group Ring Assign

You can choose one of as following lists:

Not assign

Day

Night

Both

Hunt Group On Demand Assign

You can choose one of 0-9 and Empty.

Timer 1

Exclusive Hold Recall Timer

System Hold Recall Timer

Transfer Recall Timer

I-Hold Recall Timer

ATD Recall Timer

CO Ring Detect Timer

Pause Timer

CO Release Guard TimerCO Warning Tone Timer


22/24

CO Dial Delay Timer

Call Park Timer

Preset Call Forward Timer

Unsupervised Conference Timer

ACNR Retrial Pause Timer

ACNR Retrial Delay Timer

Flexible DID Time out

ACNR No Answer Timer

ACNR Retry Counter

Warm Line Timer

PBX Code Print

Prepaid Call Warning Tone Timer

DISA Retry Counter

COS on DISA seize COL

DVU Forward Answer

R2 Manage Timer(GDK186 Only)R2 Pulse Timer(GDK186 Only)

DT Delay Timer(GDK186 Only)

ACNR No Tone Retry Counter

Switch Pause Timer

Override 1st CO Group(Yes/No)

Timer2

MSG Wait Reminder Tone Time

Hook Switch Flash Timer

Hook Switch Bounce Timer

DID/DISA No Answer Timer

ICM Box Timer

Door Open Timer

Call FWD No Answer Timer

Dial Tone Timer

Inter Digit Timer

Automatic Release Timer.

Paging Timeout Timer

Ring Stop Detection Timer

Wink TimerMinimum Hook Flash Timer

SMDR Timer

DVU User Record Timer

CO Digit Analysis Counter

ACD Print Timer

Ring Phase Timer

CAMP-ON Recall Timer

Station Auto Release Timer

DCOB TYPE

DCOB Ready Timer(Only GDK186)

Erase Wakeup Ring


23/24

Hunt Group Assign

In this menu user can select Station Group type and Input member. The Station Group types are

Circular

Terminal

UCD

VM

Ring

Pickup : Pickup can be any combionation with above

Max Hunt members are depend on system

64 : GDK186

32 : GDK100 /FPII

Hunt Group Attribute

If PGM 47 is already programmed, user can program this entry. This menu is divided into as following

[Circular/Terminal]

Almost the same attribute, but Pilot Hunt (Circular dedicated)

[UCD]

[VM]

[RING]

Pickup combined with any of this catacory follows above list

[PICKUP]

Canned Toll Exception Table

This entry is for Station Class 5,6 Toll check Table. This entry is divided into following

[ALLOW Table]

- 10 bin no.

- max 8 digits

[DENY Table]

- 10 bin no.

- max 8 digits

Toll Table

The Allow/Deny Tables are organized into 2 sets of tables to support 2 different toll plans at oneinstalled site. Each allow table may contain up to 20 number strings and each deny table 10 numberstrings. All bins of allow and deny tables have no entries by default. Each number string can contain upto 8 numbers including any number 0-9, *, #, "Don't care".

The following rules should be remembered when setting up the

Allow/Deny Tables:(1) If the tables have no entries, no restriction is applied.


24/24

(2) If entries are made in the allow table and only there, then only those numbers are allowed.

(3) If entries are made in the deny table and only there, then only those numbers are denied.

(4) If there are entries in both tables, the allow table is searched first and if number is found, it isallowed. If not found, the deny table is searched and if number is found, it is denied If it is not found in

either table, it is allowed.

gdk adm pro manual1

Documents