grundig illion dect
TRANSCRIPT
-
7/27/2019 Grundig Illion Dect
1/47
DECT
TELEPHONE
ILLIO N A 1
ILLIO N 1
en
-
7/27/2019 Grundig Illion Dect
2/47
-
7/27/2019 Grundig Illion Dect
3/47
3
TABLE OF CONTENTS22 PHONEBOOK 22 Adding a phonebook entry23 Viewing a phonebook entry23 Editing a phonebook entry
23 Deleting a phonebook entry24 Deleting the entire phonebook24 Transferring a phonebook entry24 Quick call
25 DISPLAY 25 Setting the display wallpaper 25 Setting the contrast
26 ALARM26 Set the time and date26 Setting the alarm
27 SOUND SETTINGS27 Setting the handset volume27 Setting the melody and handset volume for an external call27 Setting the melody and handset volume for an internal call28 Warning tones
29 SETTINGS29 Handset settings32 Base unit settings
35 CALL LOG35 To display the list of calls made35 Removing numbers from the list of calls35 Storing a caller's details in the phonebook
36 ANSWERING MACHINE (Illion A1 only)36 Playing a message36 TAM Settings38 Recording a memo39 Setting the outgoing message40 Activating/deactivating the answering machine40 Remote control44 Condition on delivery45 Features
46 WARRANTY
-
7/27/2019 Grundig Illion Dect
4/47
ENGLSH
4
INFORMATIONPrefaceDear customer, congratulations on buying your Grundig DECTtelephone and thank you for placing your confidence in us. Thisdevice has been manufactured with the utmost care. If you
should have difficulties in operating it, we recommend that youconsult this user manual.To operate the device safely and easily, please read the followingsections carefully:
Application informationThis telephone is to be used for transmitting voice messages viatelephone networks. Any other use is not permitted and isconsidered unfit for the intended use.
Safety information- Do not install your DECT telephone in a damp environment,such as a bathroom, washroom, kitchen etc, and not within1.50 metres of a source of water or outside. This device isdesigned for use in temperatures of between 5 C and 45 C.
- Only use the power unit supplied and connect it to the electricitymains in accordance with the installation instructions in this usermanual and the details on the sticker regarding voltage,electrical current and frequency. As a precaution if there is a
risk of danger, the power plug can be pulled out to disconnectthe 230 volt power supply. Therefore the sockets should benear the device and easily accessible.
- This device is designed to be used for connecting to the publictelephone network. If problems should arise, contact yournearest specialist dealer. Only use the telephone cable supplied.
- For safety reasons, never put the handset in the base stationwithout the battery inserted or without the lid on the batterycompartment as this could cause an electric shock.
- To avoid damaging the handset, only use the rechargeablebattery supplied. The used battery must be disposed of in linewith the recycling regulations in this user manual.
- Your DECT telephone has a range of approx. 50 metresindoors and up to 300 metres outdoors. The range can beaffected by the proximity of metal objects, such as a televisionand electrical devices.
- Certain medical equipment and highly-sensitive machines orsecurity systems may be affected by the transmission power ofthe telephone. In these cases we recommend adhering to the
safety information.- In regions greatly affected by electrical storms we recommend
that you protect your telephone circuit with a special fixture forexcess voltage.
INFORMATION
-
7/27/2019 Grundig Illion Dect
5/47
5
INFORMATION- You cannot make calls with the device if there is a power cut.
Therefore keep another telephone at the ready in the event ofan emergency.
- The CE label confirms that the product complies with the 1999/
5/EC regulations of the European Union Parliament regardingwireless systems and telecommunications for user protectionand for preventing electromagnetic interference. This ensuresthe allocated communication network is used properly andradio interference is avoided. The declaration of compliancemay be looked up on the www.grundig-dect.com website,section support or can be obtained from the followingaddress:Sagem Communication - Customer relations department4, rue du Petit Albi - 95800 Cergy Saint-Christophe - France
EnvironmentEnvironmental protection and sustainable development is animportant priority for Sagem Communication. SagemCommunication has a policy of using environmentally- friendlysystems and makes environmental protection an essential part ofthe life-cycle of its products from the manufacturing, to the
installation, operation and disposal.PackagingThe logo (green point) on the packaging means that a fee is paidto an authorised national organisation to improve packagingrecycling and the recycling infrastructure. Follow the local sortingregulations for this type of waste product in order to improverecycling.
BatteriesIf your product contains batteries, they must be disposed of at the
designated collection points.
The productThe crossed out dustbin displayed on the product signifies that itbelongs to the electrical and electronic equipment group. TheEuropean regulations request you to carry out your own selectiverecycling collection at: the sales outlet when you buy a similar new device. the collection points available in your area (recycling centres,
sorting points, etc).
This means you participate in the recycling and valorisation ofused electric and electronic goods which would otherwise havea negative impact on the environment and health.
-
7/27/2019 Grundig Illion Dect
6/47
ENGLSH
6
INFORMATIONSetting up/rangePlace the base station somewhere central and easily accessiblewhere you want to use it.
Depending on the ambient conditions, the range can be up toapprox. 300 metres outdoors. It has a range of up to 50 metresindoors depending on the space and structure of the building.The structure of the building can cause signal shadows to occur.This can lead to short interruptions when speaking due to theweak signal.The connection breaks up temporarily when there is insufficientfield strength.Place an anti-slip mat under the base station. The feet on thedevice do not usually leave any undesirable marks behind. Dueto the variety of varnish and polish used on furniture, we cannotcompletely rule out the possibility that marks from the feet of thedevice are left on any surfaces.Grundig does not accept any liability for this type of damage.Operating the base station or charger outside or in areasexposed to frost is not permitted.The recommended ambient temperature for operating the basestation is +5 C +45 C, the recommended relative airhumidity is 20 % to 75 %.
The installation location must have a mains socket for 230 voltsfor the base station or the charger.
-
7/27/2019 Grundig Illion Dect
7/47
7
SET-UPIllion box contentsPlace the box in front of you, open it and make sure it containsthe following items: one base,
one handset,
one battery compartment cover,
one equipped power adapter,
two rechargeable batteries,
power supply unit,
one telephone line cord,
this user guide.
In the case of purchasing a pack duo or trio, you will find inaddition for each additional handset: a handset charger,
an additional battery flap,
three additional rechargeable batteries.
Presenting the base unitYour base is designed to fit into your family environment.
Base unit chargincontacts
Base unit buttonShort press:
- searches forhandsets(paging).Long press:- matching ofhandsets.Indicator light (underside
of the base unit):One flash: power on/off.Constantly lit: handset on line.
Flashing: missed call(s),new SMS message(s)
SET-UP
-
7/27/2019 Grundig Illion Dect
8/47
ENGLSH
8
SET-UPPresenting the handsetYou will appreciate the design and quality of the handset duringconversations with your callers.
1. Earphone2. Display3. Access list of calls made / Navigate to menus above4. Return key / Secret mode key during communication
(Secret)5. Speaker key / Answering machine rapid access key
6. Phone pick-up7. Alphanumeric keypad8. Star key / Lock keypad9. Handset charging contacts10. OK / Menu key11. R key / Navigate to menus to the right12. Hang up / Handset on/off13. Phonebook access / Navigate to menus below14. # key / Intercommunication (between handsets)15. Microphone
1
2
3
4
5
6
7
9
10
11
12
13
15
148
-
7/27/2019 Grundig Illion Dect
9/47
9
SET-UPThe NavigatorThis is the quick menu selection device
Base unit connectionBefore making connections read the safety instructions located atthe start of this booklet.
Insert the telephone point into its housing at the rear face of thebase unit and connect the other end of the lead to the telephonewall point.
Connect the end of the mains power unit lead to the rear of thebase unit and the mains power unit to a mains power supply. The
base will emit an audible tone.
Pass the wires through the cable guide and place the base in itsdesired location.
Quick phonebooaccess / Navigate tmenus below
Quick access to list of calls
made / Navigate to menusabove
Speaker key /Answering machinerapid access key
R key / Navigate tomenus to the right
Mains point Telephone point
-
7/27/2019 Grundig Illion Dect
10/47
ENGLSH
10
SET-UPInserting batteries in the handsetOpen the battery compartment cover.Place the new batteries in the compartment.Make sure that the polarity is correct!
Close the compartment.Remove the protective film from the display, place the handset inthe base unit in order to fully charge the batteries.The charging icon is activated on the display and shows you thecharging status. When the icon is full your batteries are fullycharged.
Worn out batteries must be disposed of in accordance with therecycling instructions given in paragraph Environment of thisbooklet.
Use only approved rechargeable AAA format NiMH type 1.2 V650 mAh batteries. In order to ensure optimum charging, whenfirst used leave the handset on the base unit for at least 12 hours.
During charging batteries may become warm. This is quitenormal and is not dangerous.
Operating time of the batteriesThe operating time of the batteries in standby is up to five daysor up to ten hours for longer calls.
Service life of the batteriesTo increase the service life of the batteries, note the following:- Do not short-circuit the plug.
- Use your handset as a mobile phone and do not replace it inthe base station or charger (accessories) to be charged afterevery phone call.
+
+
Direction of insertion
Direction of opening
-
7/27/2019 Grundig Illion Dect
11/47
11
SET-UPCharging status of the batteryThe charging status of the batteries appears in the display.The number of bars show the charging status of the battery(" " flat, " " charged). When the batteries are almost flat, the
display back lighting is deactivated and a warning tone isemitted. This also happens if the batteries which are charging areremoved briefly and then replaced. As a rule new batteries onlyattain their full capacity after several charge/discharge cycles.
Although the battery display shows that the batteries in a handsetare charged, you should take into account that the length ofnormal calls and availability time is limited at the beginning.
Switching the handset on and offTo switch on your handset press the key.To switch off the handset hold down the key for a period.Your handset is then switched off.
Selecting the countryAfter inserting the batteries or after you have fully reset thehandset and the base, a menu appears in the display forselecting the country. This is required if a country group consistsof two or more countries. You must also select the networkoperator for the United Kingdom and Ireland.
1. Select the country with () or () andconfirm with the OK function button on the right.
Out of rangeWhen the distance between the handset and the base is too
great, the "Antenna" signal flashes.Move back towards the base unit
When the "Antenna" symbol stops flashing the link with thebase has been re-established.
Navigating through the menusA single press of the Menu key gives you an overall view of thevarious functions.
SMS
Phonebook
Display
Alarm/Clock
Country
OKEsc
England
Phonebook
Esc OK
-
7/27/2019 Grundig Illion Dect
12/47
ENGLSH
12
SET-UP
Remark: The TAM menu is only available on the Illion A1model.
Operation using the menus and keysPress the Menu key to access to the menus.The various menus are seen on the display
Select the menu of your choice by pressing the keys of the
navigator (), (), () or ().To enter the selected menu press the OK key.To return to the previous menu press the Esc key.In the menu, select the functions by pressing the
navigator keys or and save the modified settings bypressing the OK key.The activated setting is shown by .Once you have selected or set the function, you can return to the
previous menu level (Esc key) or leave the menu (press ).Example: to change the handset melody for external calls:1. Press the Menu key.2. Select Sound Setting, press the OK key.3. Select HS Ring using the or keys, press the
OK key.4. Select Melody using the or keys, press the
OK key.5. Select the handset melody using the or keys,
press the OK key.6. Press on the key to exit the menu.
Sound Setting
Settings
Call logTAM
-
7/27/2019 Grundig Illion Dect
13/47
13
BLOCK DIAGRAM
SMS - Write
- Inbox
- Draft- Outbox
- Service Center
Phonebook - Option - New Entry
- View Entry
- Edit Entry
- Delete Entry
- Delete all- PB transfer
- Quick Dial
Display - Wallpaper
- Contrast
Alarm/Clock - Clock Setting
- Alarm Setting
Sound Setting - HandsetVolume
- Earpiece
- Speaker
- HS Ring - Melody
- Volume
- Internal Ring - Melody
- Volume
- BS Ring - Melody
- Volume
- Tone - Key Tone
- Charge tone
- Battery low
- Out of Range
- List end tone
BLOCK DIAGRAM
-
7/27/2019 Grundig Illion Dect
14/47
ENGLSH
14
BLOCK DIAGRAM
Settings - Handset Set. - Auto answer
- Register HS
- Economy mode- Handset Name
- Language
- Default HS
- Baby Call
- Base Set - Change PIN
- Remove HS
- Default BS- Flash Time
- Pause Time
- Call log
- Auto-Delete
Call log - Option - Save toP. Book
- Delete
- Delete all
-
7/27/2019 Grundig Illion Dect
15/47
15
MAKING TELEPHONE CALLSMaking an external callExternal calls are calls made to the public network.
Enter the number of the person you are calling using the keypad
and press the key. In the event of an error being made inentering a number, press the key to delete the incorrectnumber.
If the person you are calling is recorded in the phonebook
contact list, press the key, select the name of the person
you are calling then press the key.
Answering a callwhen a call is received, every handset registered on the base unitwill ring.
Press the key on one of the handsets to answer the call.
At the end of the conversation press the to hang up.
Making an internal callInternal calls are calls between two handsets registered on thesame base unit. Internal calls are not charged for by youroperator.
Press the INT key, the numbers of handsets registered on thebase unit will appear on the display. Enter the numbercorresponding to the handset that you wish to call.
At the end of the conversation press the key.
Using the call logYou can set the call log so that all the calls or missed calls aredisplayed.1. Open the menu by pressing the Menu function button on
the right.
2. Select Settings with ( ), ( ), or Ractivate with the OK function button on the right.
3. Select Base Set with or and press the OKfunction button on the right to activate.Handset Set.Base Set
Settings
MAKING TELEPHONE CALLS
-
7/27/2019 Grundig Illion Dect
16/47
ENGLSH
16
MAKING TELEPHONE CALLS4. Select Call log with or and press the OK
function button on the right to activate.
5. Select All Call or Missed Call with or andpress the OK function button on the right to activate. The calls are displayed.
6. Press to end the setting.
CLI (Caller Line ID) functionBefore using the phone number transfer (CLI), please contact
your provider to subscribe to Caller Line Identification. This willenable you to receive calls displaying the callers number.There might be a special rate or a fee required for this functionto be enabled.If the callers phone number is in the phone book, the name ofthe caller is displayed as well as the number.If the caller has suppressed or not activated the CLI function,Unknown appears.
Managing calls whilst communication isunderwayThis function is available if your installation is made up of at leasttwo handsets registered on the same base unit.
Transfering a call to another handsetThis function allows you to transfer the call that is in progress toanother handset registered on the same base unit.Keep the INT pressed, the external call is put on hold, select thehandset to which you want to transfer the call.
When the handset being called is picked up, press the Option,key, select Call Transfer.Remark: if the handset called does not answer, you can
recover the call, Keep pressing the INT key.Switching between an external and internal callKeep the INT key pressed, the external call is put on hold, selectthe handset to which you want to transfer the call.
When the handset being called is picked up, press the Option,key, select Switch Calls.
Base Settings
Change PINRemove HSDefault BSFlash TimePause TimeCall Log
-
7/27/2019 Grundig Illion Dect
17/47
17
MAKING TELEPHONE CALLSSetting up a three party conference callKeep the INT pressed, the external call is put on hold, select thehandset to which you want to transfer the call.
When the handset being called is picked up, press the Option,key, select Conference.You can revert to a communication between two parties for bothinternal and external calls. During a conference press theOption key.Select Switch to Ext to talk to the external caller.Select Switch to Int to talk to the internal caller.Locking the handset keypadKeep the * key pressed until the icon is shown on thedisplay.
To unlock the keypad keep the * key pressed until the icon disappears from the display.
Using in hands-free modeHands-free mode allows you to hold a dialogue with your callerwithout holding the handset. It also allows other persons presentin the room to hear the conversation.
Press the key, the icon appears on the display. Dialthe number of the person you are calling.
When a call is received, press the key. Hands-free mode isthen activated.
Setting the volumethis function allows you to set the listening volume during aconversation.
Press the or keys to increase or reduce the listeningvolume. You can set the volume to a level from 1 to 5.
The volume level selected is shown on the display.
Remark: this function is also available in hands-free mode.
-
7/27/2019 Grundig Illion Dect
18/47
ENGLSH
18
MAKING TELEPHONE CALLSSecret modeThis function enables you to activate or deactivate the handsetmicrophone during a call. You can therefore allow your caller tohear or prevent your caller from hearing what you are saying.
Press the key, the person on the line cannot then hear whatyou are saying.
To deactivate secret mode press the , key. The person onthe line can now hear what you are saying.
Calling back if busyIf the number of the caller is busy, you can activate the redial.
When the line is free, your handset gives a ring tone.1. Remove the handset from the base station.
When the setting is activated, the call is takenautomatically,
or
press if the handset is not in the base station.
Activating the redialWhen you hear the busy tone ...1. Press the Option, function button on the left, select the
Rich. se occup. and activate by pressing the OKfunction button on the right.
2. After confirmation from the telephone network,
press .
Note: The function remains active for approx.45 minutes. Calling back is only possible duringthis time.
-
7/27/2019 Grundig Illion Dect
19/47
19
SMS SERVICESYou telephone allows you to send, receive and monitor SMSmessages (known as mini-messages) which are sent to anothertelephone equipped with an SMS function.
The SMS send and receive functions available in your telephonewill only operate if you have taken out an appropriatesubscription with your operator.
Sending a messagethis function allows you to draft a message and send it to theperson you are calling.
Go to Menu / SMS / Write.Enter the message text by pressing the appropriate keys in order:
Remark: In the event of an error during entry, the last lettercan be deleted by pressing the key.Briefly touching the # key allows you to selectcapital or small characters.
When you have finished an entry, press the OK key.Enter the number of the person to receive the message or selectthe number from the phonebook, then press the OK key.Select Send SMS to send the SMS or Save SMS to store it inthe Draft box.
WriteInboxDraft
Service CenterOutbox
SMS
OKEscKey 1
Key 2
Key 3
Key 4
Key 5
Key 6
Key 7
Key 8
Key 9
Key *
Key 0
Key # inversion UPDATE/min
Number:_
Write
PBOOKEsc
SMS SERVICES
-
7/27/2019 Grundig Illion Dect
20/47
ENGLSH
20
SMS SERVICESReceiving messagesThis function allows you to read messages received, to reply tomessages, to transfer messages, to store a sender's telephone
number and to delete messages.
Go to Menu / SMS / Inbox.Select the message that you wish to view by using the
or keys.
Press the Read key. The text of the message will appear on thedisplay.
To access the various options press the Option keys.
To view a stored message (Draft)This function allows you to store entered messages, to edit themand send them later or delete them.
Go to Menu / SMS / Draft.Select the message that you wish to view using the
or keys.
Press the Read key. The text of the message will appear on thedisplay.
To access the various options press the Option keys.
Mr. Sample01237856text
Inbox
ReadEsc
ForwardReplyUse Text
Inbox
OKEsc
Save to P.BookCallDelete
Edit SMS
Draft
OKEsc
SendSMS
DeleteDelete all
-
7/27/2019 Grundig Illion Dect
21/47
21
SMS SERVICESTo view a sent messageThis folder holds the messages that you have sent and that you wishto keep a copy of.
Go to Menu / SMS / Outbox.To access the various options press the Option keys.
To change the SMS centre numberThis function allows you to change the numbers for SMS centres(according to operators). You can specify an SMS centre number forreceiving and one for sending.
Go to Menu / SMS / Service Center.
Select Outgoing Nr. to specify the number of the centre for sendingmessages.
Select Incoming Nr. to specify the number of the centre forreceiving messages.
Edit SMS
Outbox
OKEsc
Send SMSCallSave SMSDeleteDelete all
Centre SMS 1
Service Center
OKEsc
Centre SMS 2Send via C2
-
7/27/2019 Grundig Illion Dect
22/47
ENGLSH
22
PHONEBOOKYou can store up to 100 contacts in your phonebook.
Each entry can contain the name of your contact as12 characters (including spaces) and their telephone number as
24 numbers.
You can associate a different ring with each entry and so createyour own call groups.
Adding a phonebook entryYou can enter names and call numbers manually or add contactsfrom the received call log or from the bis function.
Manually adding a phonebook entryGo to Menu / Phonebook / Option, (you can access thephonebook directly by pressing the key).
Select New Entry. Enter the contact name and number usingthe keypad.
Assign a melody to this new contact using the or key.
Confirm using the OK key.Adding a phonebook entry using the call logGo to Menu / Call log / Option. (you can access the calllog directly using the key).
Select Save toP. Book. Enter the contact name and numberusing the keypad.
Assign a melody to this new contact using the or key.
New EntryView EntryEdit EntryDelete EntryDelete All
PB Transfer
Phonebook
Esc OK
Enter name_
Entrer number
Tone
New Entry
A OKBack
PHONEBOOK
-
7/27/2019 Grundig Illion Dect
23/47
23
PHONEBOOKViewing a phonebook entryThis function allows you to view the data for your contact.
Go to Menu / Phonebook / Option, (you can access thephonebook directly by pressing the key).Select View Entry.
The display will show the name, number and melody assigned toyour contact.
Editing a phonebook entryThe function allows you to modify the name, number and melodyassigned to your contact.
Go to Menu / Phonebook / Option, (you can directlyaccess the phonebook by pressing the key).
Select Edit Entry.
Use the key to make changes.
Confirm using the OK key.
Deleting a phonebook entryGo to Menu / Phonebook / Option, (you can access thephonebook directly by pressing the key).
Select Delete Entry.Confirm using the OK key.
An audible tone shows that the phonebook entry is deleted fromthe list of contacts.
Mr Sample
0123456789
Tone : 3
Phonebook
Esc
Entrer name
Mr_Entrer number
Tone
Edit Entry
OKA
OK
New EntryView EntryEdit EntryDelete Entry
Delete AllPB Transfer
Phonebook
Esc
-
7/27/2019 Grundig Illion Dect
24/47
ENGLSH
24
PHONEBOOKDeleting the entire phonebookThis function allows you to delete all the entries in yourphonebook.
Go to Menu / Phonebook / Option / Delete all.Confirm using the OK key.
Transferring a phonebook entryThis function allows you to transfer your contacts to anotherhandset registered on the same base unit.
Go to Menu / Phonebook / Option / PB transfer.Select the handset to which you want the phonebook entrytransferred, press the OK keyPress the Accept key on the handset selected to receive all thephonebook entries from handset 1. Press the Abort key of thehandset 1 or Reject key of the selected handset to interrupttransfer of the phonebook.
Quick callThis function allows you to assign a keypad shortcut to a contactfrom your phonebook.Go to Menu / Phonebook.Select the contact to whom you wish to assign a keypad shortcut.
Go to the Option / Quick Dial menu. Enter the keypad keythat you wish to assign to your contact (1~9).
Press the OK key to confirm.To call your contact, keep the key that you have assigned to themdepressed (1~9), your contact's name and number will appear
on the display.
Press the key or the key to call the correspondingnumber.
Delete All ?
Delete All
Esc OK
Transf. verscombin 2
Transf. Rep
Arrt
Enter numro_
Appel Abreg
Retour
(1-9)
OK
-
7/27/2019 Grundig Illion Dect
25/47
25
DISPLAYYou can set the display wallpaper and display contrast.
Setting the display wallpaperGo to Menu / Display / Wallpaper.The current display wallpaper is shown. Use the or
keys to select an image then confirm the selection by pressingthe OK key.Setting the contrastGo to Menu / Display / Contrast.
A display shows you the various contrast levels. Use the
or keys to adjust the contrast then confirm by pressing theOK key.
Contraste
Niveau 1
Niveau 2
Niveau 3
DISPLAY
-
7/27/2019 Grundig Illion Dect
26/47
ENGLSH
26
ALARMSet the time and dateIf the base unit is not connected to the mains supply, the date andtime settings revert to 01. JAN. 00:00.
Go to Menu / Alarm/Clock / Clock Setting.Enter the new time in the format Hours: minutes, then enter thenew date in the format DD-MM-YY. Press the OK key.Remark: In the event of an error during entry, the last
number can be edited by pressing the Esc key.
Setting the alarmThe alarm function allows the handset's ring to be activated everyday at a time that you programme.When the alarm is activated, the selected ring is heard for60 seconds through the headset's speaker and an alarm screenis displayed.Stop the alarm by pressing a handset key.
Go to Menu / Alarm/Clock / Alarm Setting.An information display shows informations about the alarm:- the time when the handset will ring: press Edit to set the time
when you want the handset to ring.- alarm status: press the OK key to activate/deactivate the
alarm.- the alarm melody: press the OK key, select the melody using
the or key. Confirm using the OK key.
Set Time-Datehh:mm DD-MM-YY
12:34 01 / 05 / 07
Time: 00:00
Alarm: OffMelody
Alarm Setting
Esc Edit
ALARM
-
7/27/2019 Grundig Illion Dect
27/47
27
SOUND SETTINGSYou can assign different melodies to internal and external calls.
Setting the handset volumeYou can set the earpiece and Speaker (hands-free) volumeseparately.
Go to Menu / Sound Setting / Handset Volume.To adjust the earpiece volume select Earpiece.To adjust the Speaker volume select Speaker.
Set the desired volume by pressing or and confirm
the selection by pressing the OK key.
Setting the melody and handset volume for anexternal callGo to Menu / Sound Setting / HS Ring.Select Melody, use the or keys to specify thehandset volume. Confirm the selection by pressing the OK key.Select Volume, use the or keys to set the melodyvolume. Confirm the selection by pressing the OK key.
Setting the melody and handset volume for aninternal callGo to Menu / Sound Setting / Internal Ring.Select Melody, use the or keys to select thehandset melody. Confirm the selection by pressing the OK key.Select Volume, use the or keys to set the volume
of the melody. Confirm the selection by pressing the OK key.
Handset Volume
Earpiece
Speaker
HS RingMelody
Volume
Internal Ring
Melody
Volume
SOUND SETTINGS
-
7/27/2019 Grundig Illion Dect
28/47
ENGLSH
28
SOUND SETTINGSSetting the base unit melody and volumeGo to Menu / Sound Setting / BS Ring.Select Melody and use the or keys to select thebase unit melody. Confirm the selection by pressing the OKkey.
Select Volume and use the or keys to set thevolume of the melody. Confirm the selection by pressing theOK key.
Warning tonesThe warning tones give you certain status information relating toyour handset, for example low battery or poor reception etc.
Go to Menu / Sound Setting / Tone.A display shows the various warnings.
To activate/deactivate the selected function press the OK key.The activated function is marked by a .
BS RingMelody
Volume
Tone
Key Tone
Charge tone
Battery low
Out of RangeList end tone
-
7/27/2019 Grundig Illion Dect
29/47
29
SETTINGSHandset settingsThis function allows you to set the functions relating to thehandset.Auto answer.
Register HSEconomy modeHandset NameLanguageDefault HSBaby CallActivating/deactivating automatic pick-up
Automatic pick-up when activated enables automatic pick-up as
soon as the handset is removed from its base unit.
Got to Menu / Settings / Handset Set. / Auto answer.To activate/deactivate automatic pick-up, press the OK key.
Registering a new handsetYou can register up to five handsets on your base unit. It will thenbe possible for you to make calls between handsets.
Remark: calls between handsets are only possible whenhandsets are registered on the same base unit.calls between handsets (internal) are not chargedby the operator.
Keep the paging key of the base unit depressed until an audiblesignal is heard.
Go to Menu / Settings / Handset Set..Select Register HS using the or keys.
Enter the PIN code (Personal Identification Number), factorysetting: 0000).
Press OK to register the handset on the base unit.To cancel the handset registration, press the Esc key.
Auto answer
Register HSEconomy modeHandset NameLanguage
Default HS
Handset Set.
Enter PIN_ _ _ _
Register HS
Esc OK
SETTINGS
-
7/27/2019 Grundig Illion Dect
30/47
ENGLSH
30
SETTINGSOnce registration is complete, the handsets will display theavailable handset number (between 1 and 5). You can select thenumber that you want to be associated by pressing thecorresponding numbered key (press key 1 to select handset
number 1).Energy economy modeThis function allows you to increase the operating time of thehandset away from its charger. The display back lighting of yourhandset is switched off completely after a certain time haselapsed.
Go to Menu / Settings / Handset Set..Select Economy mode using the or keys.
Press the ON / OFF key to activate/deactivate economymode.
Customising the name of the handsetThis function allows you to assign a name to your handset (Max12 characters).
Go to Menu / Settings / Handset Set..Select Handset Name using the or keys.
Enter the handset name, confirm using the OK key.
Setting the menu languageThis function allows you to change the language in which thedisplays are shown.
Go to Menu / Settings / Handset Set..Select Language using the or keys.
A display shows the available languages. Select the desiredlanguage and press the OK key.
Esc ON
Auto answerRegister HSEconomy modeHandset NameLanguageDefault HS
Handset Set.
_
Handset Name
Esc OKA
Esc OK
Language
English
-
7/27/2019 Grundig Illion Dect
31/47
31
SETTINGSResetting the handset default settingsThe reset function is used to return to factory default settings.It deletes the contacts in the phonebook and from the call list.
Go to Menu / Settings / Handset Set..Select Default HS using the or keys.
Press the OK key to confirm the reset.To cancel the reset press the key.
Room monitoringYou can use a handset for monitoring a room.To do this place a handset in the room to be monitored. This setwill be in send mode.The other handset will remain with you in receive mode.
Go to Menu / Settings / Handset Set..Select Baby Call using the or keys.
the heading Call To: is displayed.Enter the number of another handset registered on the samebase unit, press OK; "Baby Call" is displayed on the screen.Press Pick-up or the Speaker key on the other handset in order tomonitor the first handset.
Remark: the receiver handset will only ring if a significantchange in noise level is detected in the room beingmonitored.
Esc OK
Default HS
Confirm ?
_
Baby Call
Esc OK
Call To:
-
7/27/2019 Grundig Illion Dect
32/47
ENGLSH
32
SETTINGSBase unit settingsThis function allows you to set the functions which relate to thebase unit.Change PIN
Remove HSDefault BSFlash TimePause TimeCall logAuto-DeleteChanging your PIN codeThis function is used to protect your settings against unauthorisedaccess; you can assign a personal identification PIN number
(0000 factory default setting).
Remark: Ensure that you remember the PIN number; it willbe required should you wish to change certainsettings.
Go to Menu / Settings / Base Set / Change PIN.Enter the new PIN, confirm using the OK key.Enter the new PIN once more, confirm using the OK key.Remark: in the event of an error during entry the last number
can be deleted by pressing the key.
Removing a handsetThis function allows you to remove a handset from your baseunit. This may be necessary if a handset is lost or if you alreadyhave 5 handsets assigned to the base unit.
Go to Menu / Settings / Base Set.Select Remove HS using the or keys.
the numbers of the handsets registered on the base unit appearon the display.Enter the number of the handset that you wish to remove.The removed handset will show "Non-Subscription" until it isregistered once again.
_ _ _ _
Change PIN
Esc OK
Enter New PIN
1 2 3 4 5
Remove HS
Esc
Unregistered
-
7/27/2019 Grundig Illion Dect
33/47
33
SETTINGSResetting the base unit settingsGo to Menu / Settings / Base Set.Select Default BS using the or keys.
To cancel the reset press the key.
Setting the flash timeIf you connect your telephone to an automatic PBX or in a foreigncountry, you may need to change the flash time in order to useyour telephone correctly for the following functions: call hold,three party conference calls.Contact your operator to provide you with the appropriateduration and carry out a new setting operation.
Go to Menu / Settings / Base Set.Select Flash Time using the or keys.
A list of flash times appears on the display. Select the flash time
using the or keys.
Press the OK key to confirm the selection.
Setting the pause timeThis function allows you to set the pause time that you canincorporate into a dialing sequence.
Go to Menu / Settings / Base Set.Select Pause Time using the or keys.
A list of pause times appears on the display. Select the pause
time using the or keys.
Press the OK key to confirm the selection.
Default BS
Esc OK
Confirm?
270ms
Flash Time
Esc OK
900ms
600ms
100ms
1s
Pause Time
Esc OK
3s
2s
0s
4s
-
7/27/2019 Grundig Illion Dect
34/47
ENGLSH
34
SETTINGSCall LogThis function allows you to select what type of calls are to berecorded in the received call log.
Go to Menu / Settings / Base Set.Select Call log using the or keys.
Select the calls that you want to record in the received call log,
using the or keys.
Select All Call to record all calls.Select Missed Call to record missed calls.
Press the OK key to confirm the selection.Activating/deactivating automatic deletionThis function allows you to activate or deactivate automaticdeletion of old messages stored in SMS boxes (received, drafts,Sent).If activated it frees space for new SMS messages.
Go to Menu / Settings / Base Set.Select Auto-Delete using the or keys.
Select Enable or Disable using the or keys.
Press the OK key to confirm the selection.
Missed Call
Call log
Esc OK
All Call
Disable
Auto-Delete
Esc OK
Enable
-
7/27/2019 Grundig Illion Dect
35/47
35
CALL LOGThe list of calls made by your telephone can contain 20 recordsmade up of a number with a maximum of 24 figures and a namewith a maximum of 12 characters, together with the date and thetime.
To display the list of calls madePress the navigation key to display the list of numbersdialled.
Select the number that you wish to call again using the or
keys; press the the or key. The number is
dialled automatically.
Removing numbers from the list of callsPress the navigation key to display the list of numbersdialled.
Press Option, select Delete or Delete all using the or
keys.
Press the OK key to confirm deletion.Press the Esc key to cancel deletion.Storing a caller's details in the phonebookPress the navigation key to display the list of numbersdialled.
Press Option, select Save toP. Book by pressing the or keys.
Press the OK key to add the number to your phonebook.Press the Esc key to cancel the phonebook entry.
012343677
Esc Option
Max
ChristineJean000134456336793456
Save to P.Book
Back OK
Delete All ?
Delete
Back OK
Save to P.Book
Delete All ?Delete
CALL LOG
-
7/27/2019 Grundig Illion Dect
36/47
ENGLSH
36
ANSWERING MACHINEThis telephone is equipped with an integral digital answeringmachine with a recording capacity of12 minutes. The telephoneanswering machine can only be set by the handset and remotely.Message length is adjustable from 1 minute to 2 minutes or
unlimited length. Outgoing messages (ANNONCE 1 + 2) mayeach be of 1 minute duration.
Go to Menu / TAM.The following Functions appear on the display:Message ICMSettingsRecord MemoOGMTAM On / OffRemote controlPlaying a messageGo to Menu / TAM / Message ICM.Press OK to play messages. New messages are played first.Press the Menu key to access the various options relating tomessages. The list of options is shown on the display.
Press the Esc key to exit the menu.If there are no messages, the handset shows "No message".TAM SettingsThis menu allows you to change advanced settings on youranswering machine (according to model).
Go to Menu / TAM / Settings.The following functions appear on the display:ICM Rec. TimeTime StampRing to AnsMonitoringRecord. QualityIncoming messages recording timeThis time period corresponds the talking time that your caller willhave to leave their message.
Go to Menu / TAM / Settings / ICM Rec. Time.
Message ICMSettingsRecord Memo
TAM
Esc OK
OGMTAM On/OffRemore control
Skip ForwardDelete ICM
Skip back
Remote control
Esc OK
Repeat ICMCall BackDelete all ICM
ANSWERING MACHINE (Illion A1 only)
-
7/27/2019 Grundig Illion Dect
37/47
37
ANSWERING MACHINESelect the recording time using the or keys. Press theOK key to confirm.
Time StampThis function is used to activate or deactivate the message statingthe date and time the message was recorded.
Go to Menu / TAM / Settings / Time Stamp.Press the ON / OFF key to activate/deactivate the time stampfunction.
In message playback mode, the date and time at whichmessages were recorded will be indicated. If the timestampfunction is deactivated, this information will be replaced by apause of 2 seconds.
Delay before the answering machine is switched onThis setting is used to specify the number of times your telephone
rings before your answering machine is switched on. The numberof rings can be between 2 and 9 and you can also selectAutomatic mode.Automatic mode will automatically determine the number ofrings, depending on the number of messages stored in theanswering machine.
Go to Menu / TAM / Settings / Ring to Ans.Select the number of rings using the or keys.
Automatic: if you select "Automatic", the answering machine willanswer the call after the second ring if a newmessage has been recorded. Otherwise it answersafter four rings. Users can therefore determinewhether or not a new message has been recordedfrom the number of rings (remark: the default setting
is Automatic).
2~9 rings: users can also programme the number of ringsbefore the answering machine switches on.
60 s120 sno limit
Settings
Esc OK
Automatic2 rings3 rings
Settings
Esc OK
4 rings5 rings6 rings
-
7/27/2019 Grundig Illion Dect
38/47
ENGLSH
38
ANSWERING MACHINECall filteringWhen activated the filtering function allows you to monitor themessage being left by the caller as it is being recorded. You canpick up the phone to take the call at any time.
Go to Menu / TAM / Settings / Monitoring.Press the ON / OFF key to activate/deactivate theMonitoring function.
To filter incoming calls you can allow callers to start recordingtheir message (in order to identify the caller), then pick up the
handset or press the key to take the call. If call filtering isactivated, the message recorded by the caller will be audible; ifcall filtering is deactivated the message will not be audible.
The answering machine automatically interrupts recording whenyou pick up the handset.
Recording QualityThis function is used to select the level of recording quality formessages. High quality mode reduces the capacity of the
answering machine.
Go to Menu / TAM / Settings / Record. Quality.Select the recording quality using the or keys.
Press OK to confirm and store the setting.
Recording a memoThis function allows you to place a personal message on youranswering machine. Whilst it will not be heard, it will be regardedas a new message by the answering machine.
Go to Menu / TAM / Record Memo.Press OK to switch to memo record mode; the headingMemo is shown on the display.
Press the Esc key to return to the previous menu.Press the Stop key to interrupt recording.
StandardHigh
Settings
Esc OK
Memo
Record Memo
Esc Stop
02:14
-
7/27/2019 Grundig Illion Dect
39/47
39
ANSWERING MACHINESetting the outgoing messageThis function is used to manage the outgoing messages fromyour answering machine.
Go to Menu / TAM / OGM.The following functions appear on the display:SelectRecordReplaySelecting an outgoing messageGo to Menu / TAM / OGM / Select.Select outgoing message mode using the or keys.- Annonce: selects the customised outgoing message for the
recording answering machine mode.- Annonce simple: selects the outgoing message for the
answering machine only mode.- Annonce stand.: selects the predefined outgoing message for
the recording answering machine mode.- simple stand.: selects the predefined outgoing message for the
answering machine only mode.
Recording an outgoing messageThis function is used to customise the outgoing messages fromyour answering machine.
Go to Menu / TAM / OGM / Record.Select the message that you want to customise using the
or keys.
Press the OK key to start recording.Playing back an outgoing messageThis function is used to play back your answering machine'soutgoing message.
Go to Menu / TAM / OGM / Replay.Select the message that you want to replay using the or keys.
OGM01
OGM02OGMDef1
Select
Esc OK
OGMDef2
OGM01
OGM02
Record
Esc OK
Replay
Esc OK
OGM01OGM02OGMDef1OGMDef2
-
7/27/2019 Grundig Illion Dect
40/47
ENGLSH
40
ANSWERING MACHINEActivating/deactivating the answering machineThis function is used to activate or deactivate your answeringmachine.
Go to Menu / TAM / OGM / TAM On / Off.Press the key or key to select En service / Hors
service.
Press the OK key to confirm.Remark: The answering machine operating mode
(recording answering machine or answering
machine only) is defined by selecting thecorresponding outgoing message).If the Answering Machine / Recorder function(Telephone with answering machine) is activated,outgoing message 1 is selected and callers maythen leave messages.If the answering machine only function is activated,the customised or standard answering machineonly outgoing message is played after 10 rings.
No message can be recorded when Annoncesimple or simple stand. is selected.
Remote controlYou can play back your answering machine in remote mode.This function allows you to recover your messages and accessyour answering machine from any other telephone locatedoutside your place of residence.
General managementWhen the answering machine is deactivated and remote controlis deactivated, the equipment does not answer any calls andremote access is not possible. The base unit display is switchedoff.
If the answering machine is deactivated and remote control isactive, the equipment answers a call after 10 rings by playing thefollowing message: "Enter PIN".In this mode you can remotely activate your answering machine.Once activated the telephone is in answering machine/recordingmode, the equipment uses the operating mode already selectedby the user.
-
7/27/2019 Grundig Illion Dect
41/47
41
ANSWERING MACHINEGo to Menu / TAM / Remote control.
Modifying the PIN remotely
The PIN code allows you ensure remote access to the messageson your answering machine from another telephone is secure.
Go to Menu / TAM / OGM / Remote control.Select Change PIN.
Enter the original PIN code (by default 123), press the OK keyto confirm.
Enter the new PIN, press the OK key to confirm.Enter the new PIN once again, press the OK key to confirm andstore the setting.
Activating/deactivating remote control
Go to Menu / TAM / OGM / Remote control.Select Remote control.
Press the ON / OFF key to activate or deactivate remotecontrol.
Press the Esc key to return to the previous menu.Activating/deactivating remote deletion
This function is used to activate or deactivate remote deletion ofmessages that have already been played back.
Go to Menu / TAM / OGM / Remote control.Select Remote control.
Press the ON / OFF key to activate or deactivate remotedeletion.
Press the Esc key to return to the previous menu.
Change PINRemote control
Remote control
Esc OK
Delete by remote
-
7/27/2019 Grundig Illion Dect
42/47
ENGLSH
42
ANSWERING MACHINERemote control operation
When remote control and the answering machine are bothactivated, enter the PIN code when the outgoing message isbeing played back in order to access the answering machine. A
long audible confirmation signal is heard telling you that theconnection has been established.Remote control operation is described in the following section.- If you do not press a key within 10 seconds, the machine
automatically stops.- The code is detected during the playback of the outgoing
message.- After three attempts at entering an incorrect PIN the telephone
terminates the session and hangs up.- The maximum delay between two numbers is 4 seconds.- The telephone receives commands whilst messages, memo
and the outgoing message are being read.
Remote access key functions
Playing messages and memosKey
sequencesAnswering machine function
2 Play all messages
*2 Play new message only
5 Pause
2 Repeat play back
55 Stop play back
1 Return to the start of the message
11 Go to the previous message
3 Go to the next message
Deleting messages and memosKey
sequencesAnsweringmachine function
Vocal message
02 Delete a singlemessage, whilst it
is being played
Message deleted
02 Delete allmessages playedafter playback
All messages have beendeleted
-
7/27/2019 Grundig Illion Dect
43/47
43
ANSWERING MACHINERecording outgoing messagesKey
sequencesAnsweringmachine function
Vocal message
61 Outgoingmessage 1
The person you are callingis not currently available.Please leave a messageafter the tone.
62 Outgoingmessage 2
The person you are callingis not currently available.Please try later.
Playing back outgoing messagesKey
sequencesAnsweringmachine function
Vocal message
71 Play backOutgoingmessage 1
72 Play backOutgoingmessage 2
Recording memosKey
sequencesAnsweringmachine function
Vocal message
63 Start recording aMEMO
5 Stop recording
8 On/Mode outgoing message 1 outgoing zinformationmessage Answeringmachine off.
-
7/27/2019 Grundig Illion Dect
44/47
ENGLSH
44
TECHNICAL DATACondition on deliveryBase:Ring volume: 3Ring melody: 3
PIN: 0000
Interval: On
Pause: 0 Second
Flash time: 270 ms
Handset:Ring volume: 5
Ring melody: 1
Handset volume: 3
Keypad tone: On
Battery charging tone: On
Battery alert tone: OnRange alert tone: Off
Listening tone: Off
SMS incoming tone: Off
Answering machine tone: Off
Display language: English
Automatic ringer selection: Off
Telephone book: EmptyCall list: Empty
Redial: Empty
Answering machine (Illion A1 only):TAD-PIN remote message
enquiry: 123Answering machine: On
Texts: 1 message text and1 announcement text
-
7/27/2019 Grundig Illion Dect
45/47
45
TECHNICAL DATAFeaturesStandard DECT, GAPFrequency range 1880-1900 MHz
Transmission channels 1 20Medium output Approx. 10 mWRange Up to 300 m outdoors
Up to 50 m indoors
Power supply:Power supply unit 230 V, 50 Hz, 40 mABatteries Ni-MH type, AAA, 2 x 1.2 V
550 mAhDialling method DTMF (touch tone)
Handset operating life:In use Up to 10 hours*In standby Up to 100 hours*
Ambient temperature +5 C to +45 C
Dimensions:Base station (L x W x H) 119mm x 119mm x 19mm
Handset (L x W x H) 152mm x 38mm x 23mm
Weight:Base station 180 gr.Handset 90 gr.
Connection:Power cord TAE 6F/TSV 6/4Power supply unit cable TSV 6/6
Answering machine: Approx. 11 minutesLength of recording(Illion A1 only)
* If the base station is not connected to the mains (such as in apower outage), the handset continuously searches for a basestation.Therefore, more battery power is used up and the standby time
is reduced.
Technical changes and errors reserved.
-
7/27/2019 Grundig Illion Dect
46/47
46
WARRANTYGuarantee terms and conditionsfor Ireland
If, despite our best efforts, your product presents any defects, youshould refer to your retailer and present the proof of purchasethat they gave you on the day of purchase. Should anymalfunctioning arise, the retailer will advise you what to do.For the warranty to apply, you should ensure that the product wasused in accordance with the instructions for use and the purposefor use, and that you have at your disposal the sales invoice orreceipt stating the date of purchase, the name of the retailer, thereference and the serial number of the product.
No coverage shall be given under this warranty if the followingconditions are applicable: the required documents have been modified or altered in
order to take advantage of the warranty. the manufacturing numbers, product brands or labels have
been altered or made illegible. interventions on the product have been made by an
unauthorized person. the product has been subjected to abnormal or improper use.
the product has been damaged by external factors such aslightning, over-voltage, moisture, accidental damage,improper care as well as all Acts of God.
This present warranty does not affect the consumer rights that youmay have under the laws in effect in your country.
Important:Should you return the product to the after-sales department,
please ensure that you return as well all the elements andaccessories originally supplied with the product.
WARRANTY
-
7/27/2019 Grundig Illion Dect
47/47
*252XXXXXXA*
User ManualData subject to change without notice