guida rapida quick guide - mae-srl.it · amplitude ratio is a survey method detailed in french...
TRANSCRIPT
DGWINNET
MAE advanced geophysics instruments- www.mae-srl.it 1
GUIDA RAPIDA
QUICK GUIDE
DGWINNET
MAE advanced geophysics instruments- www.mae-srl.it 2
Apertura file
Cliccare sull'icona evidenziata e selezionare il file.
Oppure si può aprire l'ultimo file visualizzato. Per fare questo bisogna cliccare con il tasto destro
del mouse nella fascia verticale sinistra e selezionare 'Carica ultimo lavoro'
DGWINNET
MAE advanced geophysics instruments- www.mae-srl.it 3
Cliccando sul bottone sarà possibile visualizzare tutte le informazioni relative all'indagine (Fig 2).
(fig. 2) Tramite questi bottoni
sarà possibile visualizzare il grafico di diagrafia (DIAGRAFIA), selezionare i primi arrivi ,
manualmente o in automatico (TEMPI), visualizzare il grafico generato dai primi arrivi (PROFILO TEMPI) e, infine, visualizzare il grafico relativo al rapporto d'ampiezza (RAPPORTO AMPIEZZA).
DGWINNET
MAE advanced geophysics instruments- www.mae-srl.it 4
Diagrafia
Durante la visualizzazione della diagrafia è possibile variare la scala. Premendo il tasto destro
sul grafico comparirà la lista degli ingrandimenti :
La scalatura non ha effetto sui dati ma solo sulla loro rappresentazione sullo schermo.
DGWINNET
MAE advanced geophysics instruments- www.mae-srl.it 5
Primi arrivi
In questa sezione è possibile visualizzare le forme d'onda del segnale ultrasonico generato
durante il test. Per ogni misura verrà mostrato il segnale e il rispettivo tempo di primo arrivo. Il tempo di primo arrivo viene calcolato in automatico ma è comunque possibile selezionarlo
manualmente. Per effettuare la modifica bisogna cliccare con il tasto destro mouse e selezionare 'Modifica picking'
A questo punto possiamo posizionarci sull'indicatore di primo arrivo e, tenendo premuto il tasto
sinistro del mouse (l'indicatore diventa verde), spostarlo avanti o indietro.
DGWINNET
MAE advanced geophysics instruments- www.mae-srl.it 6
Selezionando 'Modifica Veloce' è possibile effettuare il picking senza dover scegliere prima la
traccia, basterà scorrere il cursore.
DGWINNET
MAE advanced geophysics instruments- www.mae-srl.it 7
Profilo del tempi
In questa sezione vengono rappresentati graficamente tutti i tempi di primo arrivo. I dati
vengono aggiornati automaticamente in caso di modifica dei tempi di picking.
DGWINNET
MAE advanced geophysics instruments- www.mae-srl.it 8
Rapporto d'ampiezza
Il rapporto d'ampiezza è un metodo d'indagine contenuto nella Norma Francese NF P 94-160-1
(ottobre 2000) “Methode par transparence”, comunemente adottata in campo internazionale.
DGWINNET
MAE advanced geophysics instruments- www.mae-srl.it 9
Report
Viene generato un report modificabile e stampabile. E' possibile modificare l'aspetto base del report modificando con un qualsiasi programma di
scrittura il file report.rtf contenuto nella cartella di installazione del software.
DGWINNET
MAE advanced geophysics instruments- www.mae-srl.it 10
Salva immagini
Per esportare i grafici è sufficiente, dopo aver caricato il file lavoro, cliccare sull'icona
evidenziata. Verrà di chiesto di selezionare una cartella di destinazione e dopo la conferma verranno salvati i
grafici su file separati, pronti per essere importati in un qualsiasi programma di scrittura.
DGWINNET
MAE advanced geophysics instruments- www.mae-srl.it 11
File opening
Click on the underlined icon and select file.
Or you can open the last visualized file. You can do this by clicking with right button of the
mouse in the vertical left stripe and select ‘Upload last job’
DGWINNET
MAE advanced geophysics instruments- www.mae-srl.it 12
Clicking on button it will be possible to visualize all information related to the survey (Fig 2).
(fig. 2) Through the following buttons
It will be possible to visualize diagraphy graphic (DIAGRAPHY), select first arrivals, manually or
automatically (TIMES), visualize graphic generated from first arrivals (TIMES PROFILE) and, finally, visualize graphic of amplitude ratio (AMPLITUDE RATIO).
DGWINNET
MAE advanced geophysics instruments- www.mae-srl.it 13
Diagraphy
During diagraphy visualization it is possible to change its scale. Clicking right button of the
mouse on the graphic, zoom list will be displayed :
Scale does not affect data but only their representation on the screen.
DGWINNET
MAE advanced geophysics instruments- www.mae-srl.it 14
First arrivals
In this section it is possible to visualize wave shape of the ultrasonic signal generated during
test. For each measurement signal and related first arrival time will be displayed. First arrival time is calculated automatically but it is also possible to select it manually. To
change this feature you have to click with right button of the mouse and select 'Change picking'
At this point we can place cursor on first arrival indication and, keeping pushing left button of the
mouse (indicator turns into green), move it right or left.
DGWINNET
MAE advanced geophysics instruments- www.mae-srl.it 15
By selecting 'Fast changing' it is possible to perform picking without first choosing trace, it is
necessary to move cursor.
DGWINNET
MAE advanced geophysics instruments- www.mae-srl.it 16
Times profile
In this section all first arrival times are graphically represented. Data are automatically updated
in case there is changing of picking times.
DGWINNET
MAE advanced geophysics instruments- www.mae-srl.it 17
Amplitude ratio
Amplitude ratio is a survey method detailed in French regulation NF P 94-160-1 (October 2000)
“Methode par transparence”, commonly adopted worldwide.
DGWINNET
MAE advanced geophysics instruments- www.mae-srl.it 18
Report
An editable and printable report is generated. It is possible to modify basic aspect of the report by editing file named report.rtf included in
software installation folder with every kind of editing program.
DGWINNET
MAE advanced geophysics instruments- www.mae-srl.it 19
Save images
To export graphics, after uploading job file, click on the underlined icon.
Software will ask you to select destination folder and after confirm graphics will be saved on separated files, ready to be imported in every editing program.