hakkımızda - emin teknik a.Ş.eminteknik.com.tr/wp-content/uploads/2017/03/eminteknik_cd.pdf ·...
TRANSCRIPT
Hakkımızda
1970 yılında M. Emin Taşçı tarafından İstanbul - Sirkeci’de kurulan, Emin Teknik, hidrolik hortum rakorları üretimi ve montajı konusundafaaliyet göstermeye başladı.”
1992 yılında yönetimi ikinci kuşak Bülent Taşçı’nın devralmasıyla şirket merkezi İstanbul - Levent’e taşındı ve ürün yelpazesine sert lehim yöntemiyle başlıklı metal flex hortum, klima adaptörleri üretimi ve kaplama prosesi de eklenerek faaliyet konuları genişledi.
2003 yılında üretim alanı 750 m² den 2500 m² ye genişledi
2004 yılında ilk Flex hortum makinesi üretimine başlandı.
2005 yılında 8.500 m² kapalı olmak üzere toplam 14.000 m² lik alanda kurulu Aydınlı-Tuzla’daki kendi fabrikasına taşındı.
2006 yıllında ihracat genişledi. Flex hortum makineleri, Flex Hortum Örme makineleri ve flex hortumları dünyanın birçok ülkesine ihraç etmeye başladı.
2009 yılında metal körük ve kompansatör üretimine başlandı.
Başarılı çalışmalarını kaliteden ödün vermeden devam ettiren Emin Teknik, deneyimli ve eğitimli personeli, geniş makine parkuruyla yurt içi ve yurt dışındaki faaliyet alanlarını genişletmeye devam etmektedir.
Emin Teknik Ltd. Şti. hâlihazırda Tuzla’da bulunan iki adet fabrikasında yaklaşık 250 kişinin üzerinde çalışanıyla 15.000 m² kapalı olmak üzere toplam 20.000 m² alanda faaliyet göstermektedir.
Emin Teknik Ltd. Şti. ISO 9001:2008 sistem ve TSE olmak üzere birçok kalite belgesine sahiptir.
About
1970-Emin Teknik is founded in Istanbul by Emin Tasci to operate in manufacturing and assembly of hydraulic fittings.
1992-Bulent Tasci who takes over the management as being the second generation, moves the headquarter to Levent / Istanbul and the company’s field of activities are expanded by adding production of metal flex hose assemblies, adapters for air conditioning systems and coating process.
2003-Emin Teknik expands its production area from 750 m² to 2500 m².
2004-Emin Teknik starts to produce flexible hose machines.
2005-Emin Teknik moves into its own factory located in Tuzla / Istanbul, having a total area of 14.000 m² with 8.500 m² closed production area.
2006-Emin Teknik expands its foreign trade activities by starting to export Flex Hose Production Lines, Braiding Machines and flexible metal hoses to various countries, nearly all over the World.
2009-Emin Teknik starts to the production of metal bellows and expansion joints.
Emin Teknik Co. Ltd. continues to grow its business with an increasing success while not compromising quality. Company expands its field of activities both in domestic and international markets by its experienced and trained staff as well as its extensive machinery park.
Today Emin Teknik Co. Ltd. is operating in a total of 2 production facilities located in Tuzla employs over 250 people, having a total indoor production area of 20.000 m² to meet future growth.
Emin Teknik Co. Ltd. products and services are approved with quality certificates such as ISO 9001:2008, and TSE.
1 www.eminteknik.com
İNDEKS / INDEX
I. Emin Teknik Hakkında / About Emin Teknik
V. Teknik Bilgiler / Technical Informations
II. Üretim Teknolojimiz / Production Technology
III. Ürünlerimiz / Products
1- Makine Üretimi / Machinery Production
2- Flex Hortum Üretimi / Flexible Metal Hose Production
3- Kompansatör / Expansion Joints
1
2
333
56
1- Talaslı malat
- Şerit Testere (Max Ø280 mm)- Revolver Torna (Max Ø60 mm)- Üniversal Torna (Max Ø650 mm)- CNC Torna (Max Ø400 mm)- Sütunlu Matkap (Max Ø42 mm)- CNC Dikey İşleme Merkezi ( X: 3200 mm Y: 1600 mm Z: 800 mm)- Tel Erezyon ( X: 550 mm Y: 350 mm Z: 300 mm )- Dalma Erezyon ( X: 1020 mm Y: 510 mm Z: 630 mm)
1- Machining
- Band Saw (Max Ø280 mm)- Revolver Lathe (Max Ø60 mm)- Universal Lathe (Max Ø 650mm)- CNC Lathe (Max Ø 400mm)- Pillar Drill (Max Ø42 mm)- CNC Vertical Machining Center (X: 3200 mm Y: 1600 mm Z: 800 mm)- Wire EDM (X: 550 mm Y: 350 mm Z: 300 mm)- Sinker EDM (X: 1020 mm Y: 510 mm Z: 630 mm)
2- Soğuk Şekil Verme
- Flex Hortum Üretim Makineleri ( DN06 – DN100 )- Boru Bükme Tezgahları ( Max Ø34 x 2 )- Giyotin Makas (Max Kalınlık 6 mm )- Kompansatör Üretim Hattı ( Max Ø2000 mm)- Daha büyük çaplar için sorunuz.
2- Cold Forming
- Flex Hose Production Lines (DN06-DN100)- Pipe Bending Machines (Max Ø34x2)- Guillotine Shear (Max Thickness 6 mm)- Expansion Joints Production Lines(max Ø 2000mm)
3- Kaynak & Sert Lehim- Elektrik Ark Kaynağı- Tig Kaynağı ( 0,13 mm – 10 mm )- Mig Kaynağı ( 0,8 mm – 10 mm )- Sert Lehim ( Oksi-Asetilen “Gümüş – Sarı – Bakır)
4- Yüzey Kaplama- Elektrolitik Çinko Kaplama- Elektrolitik Nikel Kaplama- Elektropolisaj
5- Diğer Makineler- Hortum Örgü Makineleri (Max DN100)- Lazerli Markalama Cihazı ( 100 x 100 mm )
4- Surface Coating- Electrolytic Zinc Plating- Electrolytic Nickel Plating- Electropolishing
5- Other Machinery- Flexible Hose Braiding Machines (Max DN100)- Laser Marking Equipment (100 x 100 mm)
3- Welding & Brazing- Electrowelding- TIG welding- MIG welding- Brazing (oxyacetylene, silver, copper)
2 www.eminteknik.com
a- Paralel Boğumlu Metal Flex Hortum Üretimi (Kangal) / Annular Corrugated Flexible Metal Hose Production (Coils)
Esnek Metal Hortumlar
Paslanmaz esnek hortumlar, yüksek sıcaklıklara dayanıklı, kolay bükülebilir yapıya sahip olup boğum şekline göre iki sınıfta değerlendirilir:
1- Helisel boğumlu esnek hortumlar: Hortum üzerindeki boğumlar hortum boyunca helis şeklini alır. Uzamaya karşı direnci yüksektir.2- Paralel boğumlu esnek hortumlar: Boğumlar hortum eksenine dik ve birbirine göre paralel konumundadır, uzamaya karsı dirençsizdir.
Örgüsüz esnek metal hortumlar, rijit bağlantı yapmanın getirdiği zorlukları ortadan kaldırmak amacıyla tasarlanmıştır. Örgülü metal esnek hortumlar, kolay montaj ve titreşim emici özelliğinin yanında basınca dayanıklılığı ve esnek yapısıyla buhar, su, yağ ve gaz bağlantıhatlarında rahatlıkla kullanılır.
Esnek metal hortumların kullanım ömrünü etkileyen başlıca faktörler:-Fiziksel dış kuvvetler ve sürtünmeler-Montaj şartları (ön gerilmesiz olmalıdır)-Hareket aralığı-Hareket frekansı
Emin Teknik, standart, açık ve kapalı boğum olmak üzere üç tip metal hortum üretmektedir.Hortum Malzeme Yapısı: AISI 304 - AISI 321 ve AISI 316L Paslanmaz Çelik
Flex Hortumların Kullanım Alanları:-Isıtma, Soğutma sistemleri-Doğalgaz iletim sistemleri-Kombi, Şofben ve fan coil-Kat kaloriferi radyatör bağlantıları-Kazan bağlantıları-Kimyasal ve petrokimyasal tesisler-Gemi inşası ve sondaj tesisleri-Petrol ve gaz prosesleri-Uçak sanayii-Gıda ve kimya sanayi tesislerinde kullanılmaktadır.
Corrugated Metal Flexible Hoses
Corrugated flexible metal hoses with their high temperature and resistance and easy bent structures are produced in two different versions depending on the corrugation types.
1- Annular Corrugation : Annular corrugated metal hose is made from longitudinally welded tubing with the corrugations formed in parallel planes veritcal to the axis of the hose.2- Helical Corrugation : Helical corrugated metal hose is also made from longitudinally welded tubing but with the corrugations formed in helix or spiral relative to the axis of the hose.
Flexibility of corrugated metal hoses depends on the profile and the distance between the corrugations as well as the wall thickness. Higher profiles with small distance between the corrugations provide more flexibility. In the same way, reducing the wall thickness also causes an increase in the flexibility, but in this case, the pressure resistance will be reduced.
In order to increase the pressure resistance, corrugated metal hoses are reinforced with single or multiple braiding. Braiding does not only prevent longitudinal expansion of the hose caused by interior pressure, but it can also absorb exterior tensile stress and provide protection of the exterior surface of the hose.
Corrugated metal hoses can be used in all applications where high flexibility and tightness are required, due to its functional and constructional properties Another advantage of corrugated hoses is the absorption of vibrations.
Basing on the mentioned advantages of corrugated metal hoses, they can be extensively used in various industrial applications such as;-Heating & Cooling Systems-Food Industry-Chemical Industry-Boiler & Heat Exchanger-Natural Gas applications
Main factors affect the service life of the metal flexible hoses is;-Improper installation-Pressure fluctuations-Quick and intermittent movements-Higher operating temperatures
Corrugated metal hoses are normally manufactured in Standart Pitch. In general, each manufacturer specifies a standart number of corrugation per meter based on their own specifications considering the acceptable flexibility.
Open Pitch hoses have fewer corrugations per meter than the standart pitch hoses. This hose will not be as flexible as a standart pitch hose and can be used in applications where the flexibility is not particularly noteworthy. Main application area of open pitch hoses is boiler & solar systems.
Close Pitch hoses have high flexibility due to their increased number of corrugations per meter.
6 www.eminteknik.com
EMINFLEX Annular Corrugated Flex Hoses Standart Pitch
EMINFLEX Paralel Boğumlu Esnek Metal Hortum
Product Code
DN D D1 D2 One Bending Process
Frequent Bending Process
D, D1, D2 Tolerance
Premissible Operating Pressure at 20°C
Weigth (Approx)
(mm) (mm) (mm) (mm) (mm) (mm) (Bar) (kg/m)
060,025 51 510 600 141 60E
E06 151 006 015 6 6,3 9,6
10,6 25 80
150 0,140
080,020 61 510 800 141 60E
E06 151 008 015 8 8,4 12,2
13,2 32 120
110 0,160
590,016 81 510 010 141 60E
E06 151 010 015 10 10,1 14,2
15,4 38 130
100 0,195
211,010 02 510 210 141 60E
E06 151 012 015 12 12,4 16,7
17,7 45 140
75 0,228
171,0 7 82 810 610 141 60E
E06 151 016 018 16 16,4 21,9
23,3 58 160
65 0,350
912,0 4 23 810 020 141 60E
E06 151 020 018 20 20,3 26,7
28,2 70 170
±0,25
60 0,453
723,0 3 04 020 520 141 60E
E06 151 025 020 25 25,4 32,4
33,7 85 190
50 0,595
674,0 5,2 05 220 230 141 60E
E06 151 032 022 32 33,8 41,2
43 105 260
46 0,922
075,0 5,2 06 520 040 141 60E
E06 151 040 025 40 39,8 49,5
51,4 130 300
±0,30
42 1,222
007,0 6,1 07 520 050 141 60E
E06 151 050 025 50 50,2 60,3
62 160 320
32 1,380
052,1 1 511 030 560 141 60E
E06 151 065 030 65 63 76,5
80 200 460
±0,50
35 2,230
054,1 6,1 031 030 080 141 60E
E06 151 080 030 80 80 96
98 240 660
35 2,890
006,2 5,1 061 040 001 141 60E
E06 151 100 040 100 99 115
118 290 750
±0,60
25 4,320
ı- Standart Hatve Paralel Boğumlu Hortum / Standart Pitch Annular Corrugated Flex Hose
Corrugated Metal Flexible Hoses
Corrugated flexible metal hoses with their high temperature and resistance and easy bent structures are produced in two different versions depending on the corrugation types.
1- Annular Corrugation : Annular corrugated metal hose is made from longitudinally welded tubing with the corrugations formed in parallel planes veritcal to the axis of the hose.2- Helical Corrugation : Helical corrugated metal hose is also made from longitudinally welded tubing but with the corrugations formed in helix or spiral relative to the axis of the hose.
Flexibility of corrugated metal hoses depends on the profile and the distance between the corrugations as well as the wall thickness. Higher profiles with small distance between the corrugations provide more flexibility. In the same way, reducing the wall thickness also causes an increase in the flexibility, but in this case, the pressure resistance will be reduced.
In order to increase the pressure resistance, corrugated metal hoses are reinforced with single or multiple braiding. Braiding does not only prevent longitudinal expansion of the hose caused by interior pressure, but it can also absorb exterior tensile stress and provide protection of the exterior surface of the hose.
Corrugated metal hoses can be used in all applications where high flexibility and tightness are required, due to its functional and constructional properties Another advantage of corrugated hoses is the absorption of vibrations.
Basing on the mentioned advantages of corrugated metal hoses, they can be extensively used in various industrial applications such as;-Heating & Cooling Systems-Food Industry-Chemical Industry-Boiler & Heat Exchanger-Natural Gas applications
Main factors affect the service life of the metal flexible hoses is;-Improper installation-Pressure fluctuations-Quick and intermittent movements-Higher operating temperatures
Corrugated metal hoses are normally manufactured in Standart Pitch. In general, each manufacturer specifies a standart number of corrugation per meter based on their own specifications considering the acceptable flexibility.
Open Pitch hoses have fewer corrugations per meter than the standart pitch hoses. This hose will not be as flexible as a standart pitch hose and can be used in applications where the flexibility is not particularly noteworthy. Main application area of open pitch hoses is boiler & solar systems.
Close Pitch hoses have high flexibility due to their increased number of corrugations per meter.
7www.eminteknik.com
EMINFLEX Annular Corrugated Flex Hoses Open Pitch
EMINFLEX Açık Boğumlu Esnek Metal Hortumlar
Product Code
DN D D1 D2 One Bending Process
Frequent Bending Process
D, D1, D2 Tolerance
Premissible Operating Pressure at 20°C
Weigth (Approx)
(mm) (mm) (mm) (mm) (mm) (mm) (Bar) (kg/m)
050,0 5611 510 600 241 60E
E06 152 006 015 6 6,3 9,6
10,3 25 110
150 0,125
260,0 3815 510 800 241 60E
E06 152 008 015 8 8,4 12,2
12,9 32 130
112 0,160
080,016 81 510 010 241 60E
E06 152 010 015 10 10,1 14,2
15,0 38 150
97 0,195
190,0 16 02 510 210 241 60E
E06 152 012 015 12 12,2 16,4
17,3 45 165
75 0,228
141,0 1125 810 610 241 60E
E06 152 016 018 16 16,6 21,4
22,8 58 195
60 0,350
491,0 930 810 020 241 60E
E06 152 020 018 20 20,4 26,1
27,8 70 225
±0,25
62 0,453
432,0 735 020 520 241 60E
E06 152 025 020 25 25,6 31,8
33,3 85 260
43 0,595
073,0440 220 230 241 60E
E06 152 032 022 32 34,0 40,8
42,6 105 300
46 0,922
535,0 5,350 520 040 241 60E
E06 152 040 025 40 40,1 49,0
51,0 130 34 0
±0,30
42 1,205
0,6302,560 520 050 241 60E
E06 152 050 025 50 50,8 59,8
61,5 160 390 ±0,50
32 1,310
ıı- Açık Hatve Paralel Boğumlu Hortum / Open Pitch Annular Corrugated Flex Hose (For Solar Technic and Boilers)
8 www.eminteknik.com
ııı- Kapalı Hatve Paralel Boğumlu Hortum / Close Pitch Annular Corrugated Flex Hose
9
EMINFLEX Annular Corrugated Flex Hoses Close Pitch
EMINFLEX Kapalı Boğumlu Esnek Metal Hortumlar
Product Code
DN D D1 D2 One Bending Process
Frequent Bending Process
D, D1, D2 Tolerance
Premissible Operating Pressure at 20°C
Weigth (Approx)
(mm) (mm) (mm) (mm) (mm) (mm) (Bar) (kg/m)
0,100 61 02 510 600 341 60E
E06 153 006 015 6 6,1 9,5
10,5 25 70
150 0,170
0,130 21 52 510 800 341 60E
E06 153 008 015 8 8,2 12,4
13,4 30 80
112 0,240
0,140 7 03 510 010 341 60E
E06 153 010 015 10 10,1 14,2
15,4 35 90
97 0,260
0,170 5 53 510 210 341 60E
E06 153 012 015 12 12,4 16,7
17,7 40 100
75 0,300
0,260 5 04 810 610 341 60E
E06 153 016 018 16 16,2 21,7
23,2 50 11 0
60 0,460
0,310 3 05 810 020 341 60E
E06 153 020 018 20 20,2 26,6
28,3 55 130
±0,25
62 0,530
524,0 5,2 06 020 520 341 60E
E06 153 025 020 25 25,2 32,5
33,8 65 150
43 0,860
506,0 2 07 220 230 341 60E
E06 153 032 022 32 33,6 41,2
43 75 200
46 1,130
068,0 6,1 08 520 040 341 60E
E06 153 040 025 40 40 49,6
51,5 90 210
±0,30
42 1,530
589,0 1 001 520 050 341 60E
E06 153 050 025 50 49,7 60,5
62,2 110 240
32 1,665
1,960 4,0 541 030 560 341 60E
E06 153 065 030 65 63 76,5
80 200 280
±0,50
16 3,330
3,100 3,0 002 030 080 341 60E
E06 153 080 030 80 80 96
98 240 400
10 4,900
3,700 3,0 042 040 001 341 60E
E06 153 100 040 100 99 115
118 290 500
±0,60
10 5,700
www.eminteknik.com
Standart olarak esnek hortum üzerine AISI 304 paslanmaz çelik tel örgü yapılmaktadır.Müşteri isteği üzerine çift kat ve değişik konfigürasyonda da üretim yapılabilmektedir.
Hortumda tel örgü, yüksek iç basınç nedeniyle hortumun boylamasına uzamasını engelleyerekdaha yüksek basınçta çalışma yeteneği sağlamaktadır.Metal hortum ve örgünün aynı malzemeden üretilmesi mümkünse de, korozyon önleyici ve ekonomiknedenlerden dolayı farklı malzemeden de üretilirler. Örgü için genellikle AISI304 malzemekullanılmaktadır. Örgü sayısı istenen basınç ile orantılıdır. Basınç direncini arttırmak için örgü kat sayısıarttırılabilir. Örgü parametreleri: kukla sayısı, her gruptaki tel sayısı ve tel çapıdır.
SS 304 is our common braiding on flexible hoses and double braiding or different configurationsare possible upon customer’s demands.
Metal wire braid on hose assembly provides the hose a higher pressure capability by preventinglongitudinal expansion of the hose caused by high interior pressure.Though it is possible, both thewire braiding and the corrugated hose can be made of using the same basic material, because ofcorrosion protection and economical reasons, two different materials can also be used. In generalAISI304 material is used for wire braiding. The number of braidings depends on the required pressure.To increase the pressure resistance, they can be reinforced with single or multiple braidings.Construction of the braid is specified as (no. of carriers) x (no. of wires in each group) x (wire diameter).
EMINFLEX Esnek Hortumlarda Örgü KonfigürasyonlarıBraid Configuration Of EMINFLEX Flexible Hose
Hortum ÇapıHose Sizes
Tel ÇapıWire Diameter
(mm)
Tel Sayısı Kukla SayısıNo. of Carriers
DN 06 Ø 0,22 24
DN 08 Ø 0,22 24
DN 10 Ø 0,24 24
DN 12 Ø 0,24 24
DN 16 Ø 0,28 24
DN 20 Ø 0,30 36
DN 25 Ø 0,30 36
DN 32 Ø 0,38 48
DN 40 Ø 0,40 48
DN 50 Ø 0,40 48
DN 65 Ø 0,45 48
DN 80 Ø 0,45 64
DN 100 Ø 0,50
No. of Wires
7
8
9
10
10
9
9
8
9
10
9
11
11 64
Örgü Konfigürasyonu / Braid Configuration
10 www.eminteknik.com
Başlıklı Hortum Siparişlerinde hortumun malzeme cinsi, nominal çapı, nominal boyu, başlık tipi, başlık malzemesi veçalışma sıcaklığı açık bir şekilde belirtilmelidir.
When ordering, connection types, nominal diameter, operating temperature & pressure and materials for both flexiblehose and connections should be specified.
b- Başlıklı Flex Hortum (Bağlantı Çeşitlerine Göre) / Flexible Hose Assemblies (Acc. to the connection types)
11www.eminteknik.com
Kaynak Boru Bağlantı / Pipe Connection
Ürün Kodu Product Code
Hortum Çapı Nominal Diameter
(DN)
Pipe ( D x s ) ( mm )
a ( mm )
Sleeve ( d x s1 x b ) ( mm )
E06 161 106 2NL DN 06 8 x 1,0 30 14 x 1,5 x 10
E06 161 108 2NL DN 08 10 x 1,5 30 16 x 1,5 x 10
E06 161 110 2NL DN 10 12 x 1,5 30 19 x 1,5 x 10
E06 161 112 2NL DN 12 15 x 1,5 30 22 x 1,5 x 20
E06 161 116 2NL DN 16 18 x 1,5 40 28 x 2,0 x 20
E06 161 120 2NL DN 20 22 x 1,5 40 33 x 2,0 x 25
E06 161 125 2NL DN 25 28 x 1,5 45 38 x 1,6 x 25
E06 161 132 2NL DN 32 35 x 1,5 50 48 x 2,0 x 25
E06 161 140 2NL DN 40 42 x 2,0 50 58 x 2,0 x 40
E06 161 150 2NL DN 50 54 x 2,0 50 69 x 2,0 x 40
ı- Kaynak Boru Bağlantı / Pipe Connection
12 www.eminteknik.com
Nominal Diameter(DN)
Erkek Rakor / Threaded Connection, Fixed
Hortum ÇapıT a ( mm ) SW ( mm )
E06 161 506 2NL DN 06 1/4" 22 14
E06 161 508 2NL DN 08 1/4" 22 14
E06 161 510 2NL DN 10 3/8” 23 17
E06 161 512 2NL DN 12 1/2" 27 22
E06 161 516 2NL DN 16 1/2" 27 22
E06 161 520 2NL DN 20 3/4" 31 27
E06 161 525 2NL DN 25 1” 33 36
E06 161 532 2NL DN 32 1-1/4” 35 46
E06 161 540 2NL DN 40 1-1/2” 39 50
E06 161 550 2NL DN 50 2” 41 60
ıı- Erkek Rakor / Threaded Connection, Fixed
SW
Ürün KoduProduct Code
13www.eminteknik.com
Nominal Diameter(DN)
Dişi Rakor / Female Threaded Connection, Swivel
Hortum Çapı T a ( mm ) SW ( mm )
E06 161 706 2NL DN 06 1/4" 21 19
E06 161 708 2NL DN 08 1/4" 21 19
E06 161 710 2NL DN 10 3/8” 21 22
E06 161 712 2NL DN 12 1/2" 24 27
E06 161 716 2NL DN 16 1/2" 24 27
E06 161 720 2NL DN 20 3/4" 28 32
E06 161 725 2NL DN 25 1” 30 41
E06 161 732 2NL DN 32 1-1/4” 32 50
E06 161 740 2NL DN 40 1-1/2” 35 55
E06 161 750 2NL DN 50 2” 39 65
ııı- Dişi Rakor / Threaded Connection, Swivel Nut
SW
Ürün KoduProduct Code
14 www.eminteknik.com
Vakum Rakoru / Vacuum Flange
Hortum Çapı D ( mm )
d ( mm )
d1 ( mm )
d2 ( mm )
a ( mm )
E06 164 910 5NL DN 10 30,0 12,2 14,0 10,0 5,1
E06 164 916 5NL DN 16 30,0 17,2 19,0 16,0 4,5
E06 164 925 5NL DN 25 40,0 26,2 28,0 25,0 4,6
E06 164 940 5NL DN 40 55,0 41,2 41,0 40,0 4,4
E06 164 950 5NL DN 50 75,0 52,2 53,0 50,0 5,4
ıv- Vakum Rakoru / Vacuum Flange
Ürün KoduProduct Code Nominal Diameter
(DN)
15www.eminteknik.com
Sabit Flanş ( Tip I ) / Flange Connection, Fixed ( Type I )
Hortum Çapı FLANGE D
( mm ) d0
( mm ) a
( mm )
E06 166 212 1NL DN 12 PN16 / DIN 2576 95 45 50
E06 166 216 1NL DN 16 PN16 / DIN 2576 105 55 50
E06 166 220 1NL DN 20 PN16 / DIN 2576 105 55 50
E06 166 225 1NL DN 25 PN16 / DIN 2576 115 65 50
E06 166 232 1NL DN 32 PN16 / DIN 2576 140 75 50
E06 166 240 1NL DN 40 PN16 / DIN 2576 150 85 50
E06 166 250 1NL DN 50 PN16 / DIN 2576 165 100 60
E06 166 265 1NL DN 65 PN16 / DIN 2576 185 120 60
E06 166 280 1NL DN 80 PN16 / DIN 2576 200 135 60
E06 166 282 1NL DN 100 PN16 / DIN 2576 220 155 60
E06 166 284 1NL DN 125 PN10 / DIN 2576 250 185 70
E06 166 286 1NL DN 150 PN10 / DIN 2576 285 210 70
E06 166 288 1NL DN 200 PN6 / DIN 2573 320 255 70
E06 166 290 1NL DN 250 PN6 / DIN 2573 375 310 70
v- Sabit Flanş / Flange Connection, Fixed
Ürün KoduProduct Code
Nominal Diameter(DN)
16 www.eminteknik.com
Sabit Flanş ( Tip II ) / Flange Connection, Fixed ( Type II )
FLANGE D ( mm )
d0 ( mm )
a ( mm )
E06 166 412 1NL DN 12 PN16 / DIN 2633 95 45 35
E06 166 416 1NL DN 16 PN16 / DIN 2633 105 58 38
E06 166 420 1NL DN 20 PN16 / DIN 2633 105 58 38
E06 166 425 1NL DN 25 PN16 / DIN 2633 115 68 38
E06 166 432 1NL DN 32 PN16 / DIN 2633 140 78 40
E06 166 440 1NL DN 40 PN16 / DIN 2633 150 88 42
E06 166 450 1NL DN 50 PN16 / DIN 2633 165 102 45
E06 166 465 1NL DN 65 PN16 / DIN 2633 185 122 45
E06 166 480 1NL DN 80 PN16 / DIN 2633 200 138 50
E06 166 482 1NL DN 100 PN16 / DIN 2633 220 158 52
E06 166 484 1NL DN 125 PN10 / DIN 2632 250 188 55
E06 166 486 1NL DN 150 PN10 / DIN 2632 285 212 55
E06 166 488 1NL DN 200 PN6 / DIN 2631 320 258 55
E06 166 490 1NL DN 250 PN6 / DIN 2631 375 312 60
vı- Sabit Flanş / Flange Connection, Fixed
Ürün KoduProduct Code
Hortum Çapı Nominal Diameter
(DN)
17www.eminteknik.com
Yakalı Döner Flanşlı ( Tip I ) / Flange Connection, Swivel ( Type I )
FLANGE D ( mm )
d0 ( mm )
a ( mm )
E06 166 612 1NL DN 12 PN16 / DIN 2576 95 45 40
E06 166 616 1NL DN 16 PN16 / DIN 2576 105 58 40
E06 166 620 1NL DN 20 PN16 / DIN 2576 105 58 40
E06 166 625 1NL DN 25 PN16 / DIN 2576 115 68 40
E06 166 632 1NL DN 32 PN16 / DIN 2576 140 78 40
E06 166 640 1NL DN 40 PN16 / DIN 2576 150 88 40
E06 166 650 1NL DN 50 PN16 / DIN 2576 165 102 50
E06 166 665 1NL DN 65 PN16 / DIN 2576 185 122 50
E06 166 680 1NL DN 80 PN16 / DIN 2576 200 138 50
E06 166 682 1NL DN 100 PN16 / DIN 2576 220 158 50
E06 166 684 1NL DN 125 PN10 / DIN 2576 250 188 55
E06 166 686 1NL DN 150 PN10 / DIN 2576 285 212 55
E06 166 688 1NL DN 200 PN6 / DIN 2573 320 268 55
E06 166 690 1NL DN 250 PN6 / DIN 2573 375 320 55
vıı- Yakalı Döner Flanşlı / Flange Connection, Swivel
Ürün KoduProduct Code
Hortum Çapı Nominal Diameter
(DN)
18 www.eminteknik.com
vııı- Kaynaklı Flanşlı / Welded Flange
Kaynaklı Flanşlı ( Tip II ) / Welded Flange ( Type II )
FLANGE D ( mm )
d0 ( mm )
a ( mm )
E06 166 812 1NL DN 12 PN16 / DIN 2576 95 45 40
E06 166 816 1NL DN 16 PN16 / DIN 2576 105 58 40
E06 166 820 1NL DN 20 PN16 / DIN 2576 105 58 40
E06 166 825 1NL DN 25 PN16 / DIN 2576 115 68 40
E06 166 832 1NL DN 32 PN16 / DIN 2576 140 78 40
E06 166 840 1NL DN 40 PN16 / DIN 2576 150 88 40
E06 166 850 1NL DN 50 PN16 / DIN 2576 165 102 50
E06 166 865 1NL DN 65 PN16 / DIN 2576 185 122 50
E06 166 880 1NL DN 80 PN16 / DIN 2576 200 138 50
E06 166 882 1NL DN 100 PN16 / DIN 2576 220 158 50
E06 166 884 1NL DN 125 PN10 / DIN 2576 250 188 60
E06 166 886 1NL DN 150 PN10 / DIN 2576 285 212 60
E06 166 888 1NL DN 200 PN6 / DIN 2573 320 258 60
E06 166 890 1NL DN 250 PN6 / DIN 2573 375 312 60
Ürün KoduProduct Code
Hortum Çapı Nominal Diameter
(DN)
19www.eminteknik.com
Gaz Hortumları (S/E) / Gas Hoses (F/M)
Product Code DN(mm)
Fitting M/F
T1 – T2
Length(mm) Hose Type
E02 165 112 203 300
E02 165 112 206 600
E02 165 112 209 900
E02 165 112 210 1000
E02 165 112 212
12 1/2" - 1/2"
1200
E02 165 120 203 300
E02 165 120 206 600
E02 165 120 209 900
E02 165 120 212 1200
E02 165 120 215
16 3/4" - 3/4"
1500
E02 165 712 203 250
E02 165 712 206 600
E02 165 712 208 800
E02 165 712 210 1000
E02 165 712 212
12 1/2" - 1/2"
1200
E02 165 720 203 250
E02 165 720 206 600
E02 165 720 208 750
E02 165 720 210 1000
E02 165 720 212
16 3/4" - 3/4"
1200 E02 165 312 203 300 E02 165 312 206 600 E02 165 312 209 900 E02 165 312 210 1000 E02 165 312 212 1200 E02 165 312 215
12 1/2" - 1/2
1500 E02 165 320 203 300 E02 165 320 206 600 E02 165 320 209 900 E02 165 320 210 1000 E02 165 320 212 1200 E02 165 320 215
16 3/4" – 3/4"
1500
ı- Gaz Hortumları / Gas Hoses
20 www.eminteknik.com
Gaz Hortumlerı (S/S) / Gas Hoses (F/F)
Product Code DN(mm)
Fitting F/F
T1 – T2
Length(mm) Hose Type
E02 165 212 203 300
E02 165 212 206 600
E02 165 212 209 900
E02 165 212 210 1000
E02 165 212 212
12 1/2" - 1/2"
1200
E02 165 220 203 300
E02 165 220 206 600
E02 165 220 209 900
E02 165 220 212 1200
E02 165 220 215
16 3/4" - 3/4"
1500
E02 165 812 203 250
E02 165 812 206 600
E02 165 812 208 800
E02 165 812 210 1000
E02 165 812 212
12 1/2" - 1/2"
1200
E02 165 820 203 250
E02 165 820 206 600
E02 165 820 208 750
E02 165 820 210 1000
E02 165 820 212
16 3/4" - 3/4"
1200 E02 165 412 203 300 E02 165 412 206 600 E02 165 412 209 900 E02 165 412 210 1000 E02 165 412 212 1200 E02 165 412 215
12 1/2" - 1/2
1500 E02 165 420 203 300 E02 165 420 206 600 E02 165 420 209 900 E02 165 420 210 1000 E02 165 420 212 1200 E02 165 420 215
16 3/4" – 3/4"
1500
ı- Gaz Hortumları / Gas Hoses
21www.eminteknik.com
Paslanmaz Malzeme SpektleriStainless Steel Material Specifications
www.eminteknik.com56
AN
SI B
36.
19’a
gö
re n
om
inal
kal
ınlık
ve
ağır
lıkla
rı
Nom
inal
çap
Dı ç
ap(in
ç)(m
m)
Nom
inal
Diam
eter
Exte
rnal
Diam
eter
inin
ches
mm
mm
Kg/m
tm
mKg
/mt
mm
Kg/m
tm
mKg
/mt
1/8"
10.2
9-
-1.
240.
281
1.73
0.37
12.
410.
476
1/4"
13.7
2-
-1.
650.
499
2.24
0.64
43.
020.
809
3/8"
17.1
5-
-1.
650.
640
2.31
0.85
83.
201.
118
1/2"
21.3
41.
650.
814
2.11
1.01
62.
771.
260
3.73
1.62
03/
4"26
.67
1.65
1.03
42.
111.
298
2.87
1.68
03.
912.
190
1"33
.40
1.65
1.31
22.
772.
125
3.38
2.50
04.
553.
230
1-1/
4"42
.16
1.65
1.67
42.
772.
732
3.56
3.38
04.
854.
460
1-1/
2"48
.26
1.65
1.92
62.
773.
155
3.68
4.05
05.
085.
400
2"60
.33
1.65
2.42
42.
770.
992
3.91
5.43
05.
547.
470
2-1/
2"76
.10
2.11
3.74
73.
055.
345
5.16
8.62
07.
0111
.400
3"88
.90
2.11
4.58
53.
056.
557
5.49
1.28
07.
6215
.250
3-1/
2"10
1.60
2.11
5.27
23.
057.
526
5.74
13.5
608.
0818
.620
4"11
4.30
2.11
5.94
53.
058.
496
6.02
16.0
608.
5622
.290
5"14
1.30
2.77
9.63
93.
4011
.740
6.55
21.7
609.
5230
.920
6"16
8.28
2.77
11.5
143.
4014
.037
7.11
28.2
3010
.97
42.5
408"
219.
082.
7715
.049
3.76
20.3
348.
1842
.490
12.7
064
.570
10"
273.
053.
4023
.028
4.19
28.2
909.
2760
.240
12.7
081
.460
12"
323.
853.
9631
.806
4.57
36.6
339.
5273
.760
12.7
097
.360
14"
355.
603.
9834
.990
4.78
42.1
029.
5281
.210
12.7
010
7.28
016
"40
6.40
4.19
42.3
504.
7848
.220
9.52
93.1
3012
.70
123.
180
18"
457.
204.
1947
.700
4.78
54.3
009.
5210
5.50
012
.70
139.
070
20"
508.
004.
7760
.320
5.53
69.7
669.
5211
6.97
012
.70
154.
970
22"
558.
804.
7766
.100
5.53
76.4
909.
5212
8.89
012
.70
170.
860
SCH
40S
SCH
80S
(kg/
mt)
Nom
inal
thi
ckne
ss a
nd w
eigh
t/m
t
5S10
S
www.eminteknik.com 57
Fluid Car
bon
Ste
el
Cas
t Ir
on
SS
304
SS
316
SS
321
Bro
nze
Dur
imet
Tita
nium
Co
base
allo
y 6
SS
416
Acetaldehyde 1 1 1 1 1 1 1 1Acetic acid, air free 3 3 2 2 1 2 1 1 1 3Acetic acid, aerated 3 3 1 1 1 1 1 1 1 3Acetic acid, vapors 3 3 1 1 2 2 2 1 1 3
1111121111enotecAAcetylene 1 1 1 1 1 1 1 1 1
1111111111slohoclAAluminum Sulfate 3 3 1 1 2 2 1 1 3Ammonia 1 1 1 1 1 3 1 1 1 1Ammonium chloride 3 3 2 2 3 2 1 1 2 3Ammonium Nitrate 1 3 1 1 2 3 1 1 1 3Ammonium Phosphate 4 3 1 1 1 2 2 1 1 2Ammonium Sulfate 3 3 2 1 3 2 1 1 1 3Ammonium Sulfite 3 3 1 1 1 3 1 1 1 2
3111311133enilinA111111111tlahpsA2111211122reeB
Benzene (benzol) 1 1 1 1 1 1 1 1 1 1Benzoic acid 3 3 1 1 1 1 1 1 1Boric acid 3 3 1 1 3 1 1 1 1 2
1111111111enatuBCalcium Chloride (alkaline) 2 2 3 2 1 3 1 1 3Calcium hypochlorite 3 3 2 2 2 2 1 1 3Carbolic acid 2 2 1 1 1 1 1 1 1Carbon dioxide, dry 1 1 1 1 1 1 1 1 1 1Carbon dioxide, wet 3 3 1 1 1 2 1 1 1 1Carbon disulfide 1 1 1 1 1 3 1 1 1 2Carbon tetrachloride 2 2 2 2 2 1 1 1 3Carbonic acid 3 3 2 2 2 2 1 1Chlorine gas 1 1 2 2 2 2 1 3 2 3Chlorine gas, wet 3 3 3 3 3 3 3 1 2 3Chlorine, liquid 3 3 3 3 3 2 2 3 2 3Chromic acid 3 3 3 2 3 3 3 1 2 3
21113123dica cirtiCCoke oven gas 1 1 1 1 1 2 1 1 1 1Copper sulfate 3 3 2 2 2 2 1 1 1Cottonseed oil 1 1 1 1 1 1 1 1 1 1Creosote 1 1 1 1 1 3 1 1 1
1111111111enahtE1111111122rehtE
Ethyl chloride 3 3 1 1 1 1 1 1 1 21111111111enelyhtE
Ethylene glycol 1 1 1 1 1 1 1 1 1Ferric chloride 3 3 3 3 3 3 3 1 2 3Formaldehyde 2 2 1 1 1 1 1 1 1 1
323113223dica cimroFFreon wet 2 2 2 1 2 1 1 1 1Freon dry 2 2 1 1 1 1 1 1 1
2111111111larufruF1111111111enilosaG1111111111esoculG
Kimyasal Dayanım TablosuChemical Resistance Table
Değerlendirme (Scala): 1- İyi (good) 2- Normal 3- Uygun Değil (Unsuitable)
www.eminteknik.com58
Fluid Car
bon
Ste
el
Cas
t Ir
on
SS
304
SS
316
SS
321
Bro
nze
Dur
imet
Tita
nium
Co
base
allo
y 6
SS
416
Hydrochloric acid, aerated 3 3 3 3 3 3 3 2 2 3Hydrochloric acid, air free 3 3 3 3 3 3 3 2 2 3Hydrofluoric acid, aerated 2 3 3 2 3 3 2 3 2 3Hydrofluoric acid, air free 1 3 3 2 3 3 2 3 3Hydrogen 1 1 1 1 1 1 1 1 1 1Hydrogen peroxide 1 1 1 1 3 1 1 2Hydrogen sulfide, liquid 3 3 1 1 1 3 2 1 1 3Magnesium Hydroxide 1 1 1 1 1 2 1 1 1 1
1111311111yrucreMMethanol 1 1 1 1 1 1 1 1 1 1Methyl ethyl ketone 1 1 1 1 1 1 1 1 1 1
3111111133kliMNatural gas 1 1 1 1 1 1 1 1 1 1Nitric acid 3 3 1 2 2 3 1 1 3 3Oleic acid 3 3 1 1 1 2 1 1 1 1Oxalic acid 3 3 2 2 2 2 1 2 2 2
1111111111negyxOPetroleum oils 1 1 1 1 1 1 1 1 1 1Phosphoric acid, aerated 3 3 1 1 1 3 1 2 1 3Phosphoric acid, air free 3 3 1 1 1 3 1 2 1 3Phosphoric acid vapors 3 3 2 2 3 3 1 2 3 3Picric acid 3 3 1 1 1 3 1 2Potassium chloride 2 2 1 1 1 2 1 1 3Potassium hydroxide 2 2 1 1 1 2 1 1 2
1111111111enaporP1111111122nisoR
Silver Nitrate 3 3 1 1 1 3 1 1 2 2Sodium acetate 1 1 2 1 2 1 1 1 1 1Sodium carbonate 1 1 1 1 1 1 1 1 1 2Sodium chloride 3 3 2 2 1 1 1 1 1 2Sodium chromate 1 1 1 1 1 1 1 1 1 1Sodium hydroxide 1 1 1 1 1 3 1 1 1 2Sodium hypochloride 3 3 3 3 3 3 2 1 3Sodium thiosulfate 3 3 1 1 1 3 1 1 2Stannous chloride 2 2 3 1 3 3 1 1 3Stearic acid 1 3 1 1 1 2 1 1 2 2Sulfate liquor 1 1 1 1 1 3 1 1 1
1111311111rufluSSulfur dioxide, dry 1 1 1 1 1 1 1 1 1 2Sulfur trioxide, dry 1 1 1 1 1 1 1 1 1 2Sulfuric acid, aerated 3 3 3 3 3 3 1 2 2 3Sulfuric acid, air free 3 3 3 3 3 2 1 2 2 3Sulfurous acid 3 3 2 2 2 2 1 1 2 3
1111111111raTTrichloroethylene 2 2 2 1 2 1 1 1 1 2Turpentine 2 2 1 1 1 1 1 1 1 1
311211133rageniVWater, steam 2 3 1 1 1 3 1 1 1 2Water, distilled 1 1 1 1 1 1 1 1 1 2Water, sea 2 2 2 2 2 1 1 1 1 3
3111111133eniWZinc chloride 3 3 3 3 3 3 1 1 2 3Zinc sulfate 3 3 1 1 3 2 1 1 1 2
www.eminteknik.com 59
LENGTH L’mm (FREE HOSE LENGTH)
DIMENSION X mm (OFFSET MOTION)NOMINALBORE STATIC
6
10,12
20
25
32
40
50
65
80
100
125
150
200
250
0
85
90
95
105
110
140
170
200
215
230
245
280
320
360
15
140
150
170
185
205
250
300
340
380
405
430
510
560
620
25
180
190
220
240
260
320
380
430
500
525
550
650
710
780
50
290
310
335
365
440
520
590
680
720
760
910
990
1070
35
215
225
255
280
305
370
440
500
580
610
640
760
830
900
75
425
450
530
630
720
820
875
930
1100
1210
1320
100
610
730
380
940
1005
1070
1270
1400
1510
100
800
920
1040
1120
1200
1420
1560
1690
150
870
1000
1140
1225
1310
1560
1720
1820
175
940
1070
1230
1325
1420
1690
1860
2010
200
1130
1310
1415
1520
1800
1990
2160
225
1190
1380
1490
1590
1900
2100
2290
250
1450
1560
1670
1990
2210
2340
Flexible Hotrum Montajlari İçinMinimum Uzunluğun Hesaplanmasi
Calculation Of Minimum Hose Length For Flexible Hose Installations
Static Flexing
Minimum Overall Length = L (Static) + (2 x P)P -Dimension of the end fittings.
Statik esneklik
Minimum tam uzunluk = L (Statik) + (2 x P)P -uç bağlantı rekorlarının ebadı
Vertical loop (Maksimum travel about fixed point)Vertical movementS = 1,2 π R + T/2 + 2P
Düşey büküm (sabit nokta etraflarında maksimum hareket kabiliyeti)Düşey hareket kabiliyetiS = 1,2 π R + T/2 + 2P
Vertical loop (short horizontal travel)Horizontal movementS = 1,2 π(R + T/2) + 2P
H =S- π R
2+R
Düşey büklüm (kısa yatay hareket)Yatay hareket kabiliyetiS = 1,2 π(R + T/2) + 2P
H =S- π R
2+R
Important: In loop installations, both connectionsand travel should be in the same plane as the bend.
Önemli: Kıvrımlı döşemelerde, her iki bağlantı vehareketlilik kıvrım ile aynı düzlemde olmalıdır.
S= Overall length R= Bend radius which must not be less than minimum shown in table 1.P= Length over End Fitting & Ferrule H= Height π= 3,142
S= Tam uzunluk R= Bükme yarı çapı (aşağıdaki tabloda belirtilen değerden düşük olmamalıdır)P= Uzunluk üzerine bağlantı rekorları ve demir halka H= Yükseklik π= 3,142
Intermittent Flexing
Minimum Overall Length = L (Flexing) + (2 x P)L- Dimension from chart below relative to Offset Motion “X” P -Dimension of the fittings.
Aralık esneklik
Minimum tam uzunluk = L (Esneklik) + (2 x P)L- ‘’X’’ dirsek hareketine bağlı olarak aşağıdaki tablodabelirtilen ebat P-rakorların ebadı
www.eminteknik.com60
Açık Hatve Paralel Boğumlu Esnek Hortumlarda Basınç Kaybı*Pressure Loss of Wide Pitch Paralel Corrugation Flexible Hose*
Esnek Metal Hortumlar sıvı, gaz hatta katı malzemelerin taşınmasında kullanılırlar. Hortum içinde taşınan malzemenin Basınçkaybına uğraması birçok parametreye bağlıdır. Bunlar yoğunluk, sıcaklık, viskozite, akma hızı, hortum iç çapı, hortuma bağlı içyüzeyin direnç katsayısı gibi parametrelerdir.
Corrugated Metal Flex Hoses are used by transporting of gases, liquids and also solid materials.The pressure loss of thematerial in the flex hose depands on several parameters.Those are density, heat, viscosity, flowing speed, the insidediameter etc...
*Grafikler, açık hatve esnek hortumlarda birim boyda basınç kaybını yaklaşık olarak göstermektedir. Sıcaklık: 20°C - Akışkan: Su – Hortum: düz (Bükümsüz)
*The graphics show the appr. pressure loss by open pitch flex hoses. Heat: 20 oC – Water – Hose: non inflective.
www.eminteknik.com 61
Parametreler
Temperature ºC
Material
20 50 100 150 200 250 300 350 400 450 500 550
Reduction factors
1,4306
1,4301
1,4541
1,4404
1,4435
1,4571
Bronze
1,00
1,00
1,00
1,00
1,00
1,00
1,00
0,89
0,90
0,93
0,90
0,90
0,92
0,95
0,72
0,73
0,83
0,73
0,73
0,80
0,90
0,64
0,66
0,78
0,67
0,67
0,76
0,80
0,58
0,60
0,74
0,61
0,61
0,72
0,75
0,54
0,55
0,70
0,58
0,58
0,68
0,70
0,50
0,51
0,66
0,53
0,53
0,64
0,48
0,49
0,64
0,51
0,51
0,62
0,46
0,48
0,62
0,50
0,50
0,60
0,44
0,46
0,60
0,49
0,49
0,59
0,43
0,46
0,59
0,47
0,47
0,58
0,43
0,46
0,58
0,47
0,47
0,58
Permissible Deviations
The nominal length (NL) relates to a hose provided with connection fittings and describes the overall length of the hose. Unless otherwise agreed when ordering, the following permissible length deviations should be taken into account when determining the nominal length.
İzinler Verilen Sapmalar
Nominal uzunluk (NL) bağlantı rakoru ile hortumu ifade edip tüm uzunluğu tarif eder. Sipariş esnasında aksi durum belirtilmedikçe, aşağıda tabloda verilen uzunluk sapmaları, nominal uzunluğu belirlerken dikkate alınmalıdır.
Nominal lenght in mm
Permissible lengthdeviation
+ 10 mm- 5 mm
+ 15 mm- 10 mm
+ 1,5% - 1,0%
up to 500
over 500up to 1000
over 1000
Smaller lenght tolerances are possible but must be specifi-cally agreed when ordering.
Daha küçük uzunluk toleransları mümkündür ancak sipariş esnasında özellikle karşılıklı onaylanmalıdır.
For metal hose assemblies of which the reduction is not specified in ISO 10380, the reduction in operating pressure needs to be calculated by means of the fall in high temperature strength, the strength characteristic values being those specified by the material manufacturer or validated measurements from our own material tests.
The following table gives an overview of the respective pressure reduction factors for the most frequently used materials. Strength values for other materials can be found in Appendix A.
ISO 10380 sıtandardında redüksiyon faktörü belirtilmemiş olan metal hortumlar için, çalışma basıncındaki redüksi-yon faktörü yüksek ısıdaki mukavemet düşüşüne göre hesaplanmış olup bu mukavemet değerleri üretici firma tarafından belirtilen değerler veya kendi malzeme testlerimizden elde edilen onaylanmış ölçümlerdir.
Aşağıdaki tabloda en sık kullanılan malzemeler için basınç redüksiyon faktörleri gösterilmektedir. Diğer malzemelerin mukavemet değeri Ek A’ da verilmektedir.
The permissible operating pressures given for metal hoses and connection fittings in the tables of this manual apply to operating conditions at ambient tempratures, these operat-ing pressures must be reduced.
In many cases, metal hose assemblies must be of a design that conforms to PED 97/23/EC, the associated product standard EN 14585 as well as supporting standards such as DIN EN ISO 10380. Among other materials, the latter specifies reduction factors for stainless steels at higher operating temperatures.
Bu kılavuzun tablolarında belirtilen metal hortumlar ve bağlantı rekorlarının tolerans değeri ve çalışma basınçları belirtilen ortam sıcaklıkları içindir. Uygulama daha düşük çalışma basınçlarında yapılmalıdır.
Bir çok durumda, metal hortum rekorları PED 97/23/EC’nin ilgili standardı ile EN14585 ve DN EN ISO 10380 gibi destekleyici standartlara uygun olarak tasarlanmıştır. Diğer paslanmaz çelikten malzemelerin daha yüksek çalışma sıcaklıkları için uyarlama faktörleri belirlenmiştir
Reduction factors for higher operating temperatureDaha yüksek çalışma sıcaklıkları için uyarlama faktörü
www.eminteknik.com62
www.eminteknik.com
REKOR ÜRETİMİNDE KULLANILAN
VİDA DİŞ TEKNİK ÖLÇÜLERİMeasurements Used For Fitting Threads
ThreadDimension
DİŞ DİBİø D mm
DİŞ ÜSTÜø D mm
M12x1.5 12.0 10.5M14x1.5 14.0 12.5M16x1.5 16.0 14.5M18x1.5 18.0 16.5M20x1.5 20.0 18.5M22x1.5 22.0 20.5M24x1.5 24.0 22.5M26x1.5 26.0 24.5M30x1.5 30.0 28.5M30x2 30.0 27.9M33x1.5 33.0 31.5M33x2 33.0 30.9M36x1.5 36.0 34.5M36x2 36.0 33.9M38x1.5 38.0 36.5M38x2 38.0 35.9M42x1.5 42.0 40.5M42x2 42.0 39.9M45x1.5 45.0 43.5M45x2 45.0 42.9M48x1.5 48.0 46.5M48x2 48.0 46.5M52x1.5 52.0 50.5M52x2 52.0 49.9
METRİKVİDA DİŞ ÖLÇÜLERİ
DIN 13
ThreadDimension
DİŞ DİBİø D mm
DİŞ ÜSTÜø D mm
7/16’’-20 11.07 10.001/2’’-20 12.70 11.609/16’’-18 14.25 13.005/8’’-18 15.85 14.703/4’’-16 19.00 17.607/8’’-14 22.17 20.501’’5/16’’-12 33.30 31.301’’5/8’’-12 41.22 39.201’’7/8’’-12 47.22 39.202’’1/2’’-12 63.45 61.503’’-12 76.20 74.303’’1/2-12 88.90 87.00
UNF / JICVİDA DİŞ ÖLÇÜLERİ
(Whitwort vida)DIN 11
ThreadDimension
DİŞ DİBİø D mm
DİŞ ÜSTÜø D mm
R 1/8’’-28 9.73 8.6R 1/4’’-19 13.16 11.5R 3/8’’-19 16.66 14.9R 1/2’’-14 20.96 18.6R 5/8’’-14 22.91 20.61R 3/4’’-14 26.44 24.1R 1’’-11 33.25 30.3R 1’’-1/4-11 41.91 38.9R 1’’-1/2-11 47.80 44.9R 1’’-3/4-11 53.75 50.8R 2’’-11 59.62 56.7R 2’’-1/4-11 65.70 62.80
BSPVİDA DİŞ ÖLÇÜLERİ
(Whitwort boru vidası)DIN ISO 228
ThreadDimension
DİŞ DİBİø D mm
DİŞ ÜSTÜø D mm
9/16’’-18 14.25 13.0011/16’’-16 17.46 15.7013/16’’-16 20.60 18.601’’-14 25.40 23.101’’3/16-12 30.16 27.501’’7/16-12 36.51 33.801’’11/16-12 42.86 40.202’’-12 50.80 48.10
ORSVİDA DİŞ
ÖLÇÜLERİ
DİŞ ÖLÇÜSÜ DİŞ ÖLÇÜSÜ DİŞ ÖLÇÜSÜ
63
Montaj TipleriUygun ve uygunsuz modeller aşağıdakimontaj çizelgesinde gösterilmiştir.
Installation Types
Correct and incorrect models are shownin the installation chart.
www.eminteknik.com64