hand pallet truck - opk 株式会社をくだ屋技研 · pdf filehand pallet truck further...
TRANSCRIPT
HAND PALLET TRUCKCP
Think Future
ecology product
OSAKA JAPAN
FOUNDED 1934 ESTABLISHED 1954
Hand Pallet Truck further evolved
CP-15S-107
Neutral lever operable at easeDOWN Lowering
UP Lifting
N Neutral
Ensures ease of
operation with
or without loads.
The comprehensive technology of OKUDAYA GIKEN as a leading manufacturer has developed complete new models taking over the excellent performance of the long sellers.
Incorporates automatic load check valve
Prevents pallet overloading at the time of lifting, thus protecting the operator and product.
Incorporates valve cleaning device
Simply cleans the inner side of the valve, thus keeping the valve in normal condition.
Safety lowering valve
A built-in swoop prevention valve safely moves loads downward.
A variety of options to meet on-site needs.Making the best use of OPK's longtime experience and know-how, OKUDAYA GIKEN has prepared a variety of options to meet all on-site environments and operating conditions. OPK's product variations in a wide variety in combination with these options respond to a wide range of customer needs.
(For details, see page 6.)
Incorporates a resin-made handle.The material has been changed from iron to smooth lightweight resin with improvement in functionality. The strength of the handle is preeminent for a resin-made component.
OPK’s unique operation method.The lever can be set to the neutral position with ease by pulling up the lever in the front direction. No delicate adjustments are required. OPK’s Hand Pallet Truck has been adopting this unique method over many years in consideration of the operability and safety of the lever, thus gaining high evaluation and trust of all Catch Pallet Truck users.A completely new handle design.
Based on a universal design concept, the handle has been changed in shape completely. OPK’s new handle was designed in pursuit of a form that is easy-to-use for everyone, which allows flexible handling with delicate angle adjustments.
Steering wheel with aluminium core.The core has been changed from cast metal to aluminium. The weight reduction of the steering wheel ensures smooth handling.
1
Dimensions
Option
Specification
Model
1,500
2,000
2,500
3,000
3,500
5,000
Capacity
(kg)
80
80
80
85
85
100
Min. H
(mm)
Net
weight
(kg)
Overalllength(mm)
Overallheight(mm)
Steeringwheel
Dia. φ width
(mm)
Loadwheel
Dia. φ width
(mm)
200
200
200
205
205
220
Max. H
(mm)
H1 H2
1,260
1,3901,4801,5601,4801,2601,4801,6301,8101,2601,4801,5601,2601,4801,6301,8101,4801,6301,4801,6302,0101,4501,6001,9801,9002,200
1,170
1,170
1,170
1,170
1,170
1,190
Rubber180×60
Rubber180×60
Urethane180×60
Urethane180×60
Urethane180×60
Urethane200×70
Urethane80×73
Urethane80×73
Urethane80×73
UrethaneTandem80×73
UrethaneTandem80×73Urethane
Tandem 80×73
62727374757576808393727475768083938288100115135102117137220240
470
520
620
685
520
685
520685520
685
520
685
700
Fork (mm)
W2 H3L4
Inner width
W1
Outer width
170
220
320
385
220
385
220385180
345
180
345
360
L1
Length
850
9801,0701,1501,070 8501,0701,2201,400 8501,0701,150 8501,0701,2201,4001,0701,2201,0701,2201,6001,0701,2201,6001,5001,800
L2
730
860 9501,030 950 730 9501,1001,280 730 9501,030 730 9501,1001,280 9501,1001,0101,1601,5401,0101,1601,5401,4401,760
L3
570
700 790 870 790 570 790 9401,120 570 790 870 570 790 9401,120 790 940 770 9201,300 770 9201,3001,2001,500
L1
L3
L2
W1
W2
H1
H2
350
Steeringwheel
Load wheel
L4
H3
(Option) Tandem-wheel model (Standard model only)
200 80CP-15,20,25
◎�is available on request.※The handles of CP-35 and CP-50 are made of steel.
Standard TypeA unique design with no maintenance effort required promises epoch-making cargo transfer.Select the best suitable model from wide variations.
Specifications for Standard Types
CP- 15M - 85CP- 15 S - 85CP- 15 S - 98CP- 15 S - 107CP- 15 S - 115CP- 15 J - 107CP- 15 L - 85CP- 15 L - 107CP- 15 L - 122CP- 15 L - 140CP- 20S - 85CP- 20S - 107CP- 20S - 115CP- 20L - 85CP- 20L - 107CP- 20L - 122CP- 20L - 140CP- 25S - 107CP- 25L - 122CP- 30S - 107CP- 30L - 122CP- 30L - 160CP- 35S - 107CP- 35L - 122CP- 35L - 160CP- 50L - 150CP- 50L - 180
Standard Models, Standard Types
CP-15L-140CP-20L-140CP-50L-150
CP-15S-107
For double-sided pallets (1,100 mm)For heavy loads (5 tons)
Parking BrakeMountable to all models.
Descending Speed Control Valve(Equipped only on CP-50)
Faster the descending speed when no loads are on the forks.
2
Dimensions
Low-profile and ultra low-profile types are ideal for the transportation of office automation (OA) equipment and vending machines, etc.
Specifications for Low-profile and Ultra Low-profile Types
■�
Specification
ModelCP- 15M - 85HCP- 15S - 107HCP- 15S - 115HCP- 15L - 107HCP- 15L - 122HCP- 15L - 140HCP- 20S - 107HCP- 20S - 115HCP- 20L - 107HCP- 20L - 122HCP- 20L - 140HCP- 25S - 107HCP- 25L - 122H
1,500
2,000
2,500
Capacity
(kg)
65
65
65
Min. H
(mm)
Net
weight
(kg)
Overalllength(mm)
Overallheight(mm)
Steeringwheel
Dia. φ width(mm)
Loadwheel
Dia. φ width(mm)
185
185
185
Max. H
(mm)H1 H2
1,2601,4801,5601,4801,6301,8101,4801,5601,4801,6301,8101,4801,630
1,170
1,170
1,170
Rubber180×60
Rubber180×60
Urethane180×60
Urethane65×73
Urethane65×73
Urethane65×73
62747580839374758083938288
470
520
685
520
685
520685
Fork (mm)
W2 H3L4
Inner width
W1
Outer width
170
220
385
220
385
220385
L1
Length
8501,0701,1501,0701,2201,4001,0701,1501,0701,2201,4001,0701,220
L2
720 9401,020 9401,0901,270 9401,020 9401,0901,270 9401,090
L3
570 790 870 790 9401,120 790 870 790 9401,120 790 940
■�CPL-10M - 85LCPL- 10S - 107L
1,000 39 114Nylon
39×73Urethane150×45
5662
8501,070
720940
610830
1,3101,530
1,120450520
150220
■�Specifications for Ultra low-profile Types (45 mm)
Specifications for Low-profile Types (65 mm)
Specifications for Ultra low-profile Types (39 mm)
CPL- 10M - 85CPL- 10M - 100CPL- 10S - 107CPL-10 L - 122CPL-10 L - 140CPL- 13S - 107CPL-13 L - 122
1,000
1,250
45
45
135
135
Nylon45×73
Urethane 45×73Urethane45×73
Urethane150×45
Urethane150×45
5862667211897107
8501,0001,0701,2201,4001,0701,220
720 870 9401,0901,270 9401,090
590 740 810 9601,140 810 960
1,3001,4501,5201,6701,8501,5201,670
1,120
1,120
450
520
685
520685
150
220
385
220385
L1
L2
W1
W2
H1
350
Steeringwheel
Load wheel
L4
H3
L3
H2
Low Profile TypeUltra Low Profile Type
Low profile65mm
Low profile65mm
UltraLow profile39 or 45mm
UltraLow profile
45mm
Option
Parking BrakeMountable to all models.
CPL-10L-140 (45mm)CP-15L-140H (65mm)CP-20L-140H (65mm)
CP-15S-107H
CPL-10S-107For double-side pallets (1,100 mm)
3
◎�is available on request.
Specifications for Traverse Types
Specifications for TCP Types
TraverseTypeLateral/Normal Movement Types
TCPTypeTCP Types(for 1,100 mm double-sided pallets)
Specification
Model
Capacity
(kg)
Min. H
(mm)
Net
weight
(kg)
Overalllength(mm)
Overallheight(mm)
Steeringwheel
Dia. φ width(mm)
Loadwheel
Dia. φ width(mm)
Max. H
(mm)H1 H2
Fork (mm)
W2 H3L4
Inner width
W1
Outer width
L1
Length
L2 L3
CPW- 15L - 65CPW- 15L - 85CPW- 15L -107CPW- 15L -122
1,500 80 205Urethane80×7370×56
Rubber180×60
76818893
650 8501,0701,220
625 8251,0451,195
390 590 810 960
1,0601,2601,4801,630
1,170685 345
TCP- 15S - 114TCP- 15L - 114
1,500 80 180 1,660 1,170 Rubber180×60
Urethane80×73
7379
520685
220385
1,140 1,2451,125
Option
Parking BrakeMountable to all models.
TCP-15S-114
CPW-15L-65
80 to 160 mm: Normal movement161 to 205 mm: Lateral movement
■�Dimensions
■�Special Arm on Front End of Fork
■�Dimensions
When pulling out
When piling up
350
L1
L2
L3
L4
W1
H3
W2
H1
H2
Steeringwheel
Load wheel
W2
Steeringwheel
H3
Load wheel
350
W1
L1
L2
L3
L4
H1
H2
4
• Each TCP type incorporates special arms on the front end of the fork as shown on the right-hand side, thus making it possible to pull out a single double-sided pallet from a fully loaded container.
• If there is a free space for the rear wheel in a storage area as shown on the right-hand side, double-sided palettes can be piled continuously in the area, which contributes to storage space saving.
• A low-profile model with a minimum height of 65 mm is available on request.
• Each lateral/normal movement type demonstrates power for the transportation of the lengthy loads, e.g., autoclaved lightweight concrete (ALC) blocks, wood, and steel material, in narrow areas.
• Moves laterally while cargo is loaded on the pallet.• Provided with a stopper for the handle rotated 90˚.
Specifications for Semi-Stainless Types
�
�
CPF-15S-107-A
CPFS-15S-107-A
CPFG-15S-107-A
Made of stainless steel in every detail.
Specification
ModelCPFS-15M - 85 -ACPFS-15S - 107 -ACPFS-15 L - 107 -ACPFS-15 L - 122 -ACPFS-15S - 107H-ACPFS-15 J - 107H-ACPFS-15 L - 122H-A
1,500
1,500
Capacity
(kg)
80
65
200
185
Min. H
(mm)
Net
weight
(kg)
Overalllength(mm)
Overallheight(mm)
Steeringwheel
Dia. φ width(mm)
Loadwheel
Dia. φ width(mm)
Max. H
(mm)
H1 H2
1,230
1,450
1,600
1,450
1,600
1,170
1,170
Calos180×60
Calos180×60
Calos80×73
Calos65×73
54647073646573
470520
685
520620685
Fork (mm)
W2 H3L4
■�Dimensions
Inner width
W1
Outer width
170220
385
220320385
L1
Length
850
1,070
1,220
1,070
1,220
L2
730
950
1,100
940
1,090
L3
570
790
940
790
940
The frame, handle, and shaft of each model are all made of SUS, and the other parts are nickel-chrome plated.CPFG-15M- 85 -ACPFG-15S - 107 -ACPFG-15 L- 107 -ACPFG-15 L- 122 -ACPFG-15S -107H-ACPFG-15 J -107H-ACPFG-15 L -122H-ACPFG-30 L- 122 -A
1,500
1,500
3,000
80
65
85
200
185
205
Calos80×73
Calos65×73
Calos180×60
Calos180×60
Urethane180×60 80×73
54647073646573134
850
1,070
1,220
1,070
1,2201,220
730
950
1,100
940
1,0901,160
570
790
940
790
940920
1,230
1,450
1,600
1,450
1,6001,600
1,170
1,170
1,170
470520
685
520620685685
170220
385
220320385345
Paint finish. The main pump parts and sliding parts are made of SUS.CPF-15M - 85-ACPF-15S - 107-ACPF-15 L - 107-ACPF-15 L - 122-ACPF-15S -107H-ACPF-15L -122H-ACPF-20S - 107-ACPF-20 L - 122-A
1,500
1,500
2,000
80
65
80
200
185
200
Nylon80×75
Nylon65×75Nylon
80×75
Nylon175×60
Nylon175×60
Nylon175×60
5666727566757179
850
1,070
1,2201,0701,2201,0701,220
730
950
1,100 9401,090 9501,100
570
790
940790940790940
1,230
1,450
1,6001,4501,6001,4501,600
1,170
1,170
1,170
470520
685
520685520685
170220
385
220385220385
◎�is available on request.
*Due to limitations inherent in the tank plating process, some surfaces may be subject to brush electroplating.
�
�
�
�
�
�
�
◎�
H2
L3
L1
L2
W1
W2
H1
350
Steeringwheel
Load wheel
L4
H3
A lineup of tough and clean models withstanding rust and low temperatures.
Specifications for All-Stainless Types
Specifications for Cold Room Types ■�Option
Parking BrakeMountable to all models.
Cold Room Type
Semi-Stainless Type
All-Stainless Type
All-Stainless TypeSemi-Stainless TypeCold Room Type
Urethane Tandem
• Taking an active part in food-, chemical-, and electronic-related applications.
• Models with cold room specifications are available at a temperature as low as -10˚C.
• A temperature range from -11˚C to -35˚C is optionally available.
5
Specifications for Low-noise Types
Options (Available on Request)
Built-to-order models are manufactured
on request. For details, contact your
OPK representative.
Built-to-order Models
Specification
ModelCP-15S-107TCP-15J-107TCP-15L-122T
1,500
Capacity
(kg)
80
Min. H
(mm)
Net
weight
(kg)
Overalllength(mm)
Overallheight(mm)
Steeringwheel
Dia. φ width(mm)
Loadwheel
Dia. φ width(mm)
200
Max. H
(mm)
H1 H2
1,480
1,6301,170
Rubber180×60
WhiteUrethane80×73
747583
520620685
Fork (mm)
W2 H3L4
■�Dimensions
Inner width
W1
Outer width
220320385
L1
Length
1,070
1,220
L2
950
1,100
L3
790
940
◎�
◎�
◎�
L1
L4
W1
H1
H2
350
Steeringwheel
Load wheel
H3
W2
L2
L3
CP-15S-107T
• Reduced the annoying noise generated at thetime of pallet insertion and extraction.
• Low-noise Types recommended forenvironment where noise suppression is required.
Low-noiseType
For Roll Transportation
Wide Modelwith Auxiliary Casters Provided
Nylon Wheel• Mountable to standard types. (CP-10 to CP-25).
Parking Brake with Safety Cover• Mountable to all models.
Urethane Wheel (with Aluminium Core)• Mountable to standard types. (CP-10 to CP-20).
• Provided as standard accessory to CP-25 and CP-30.
Anti-bacterium White Urethane Wheel(with Aluminium Core)• Mountable to standard types. (CP-10 to CP-20).
Electroconductive Wheel (with Aluminium Core)• Mountable to standard types. (CP-10 to CP-25).
Tandem Wheel Model�• Mountable to standard types. (CP-15 to CP-25).
• Provided as standard accessory to CP-30 and CP-50.
Steering Wheel Safety Cover• Mountable to all models.Note: Cannot be used together withthe parking brake.
Supplementary Caster• Model for heavy loads (5 tons)
• Contact your OPK representative for information on models for which urethane wheels or nylon wheels are available.• Wheels may be discolored due to the characteristics of the material, which, however, does not have an adverse influence on the quality.
Parking BrakeMountable to all models.
◎�is available on request.
6
* Products with special specifications besides those with standard specifications are manufactured as well. Feel free to contact OKUDAYA GIKEN.The specifications described in this catalog are subject to change without notice for product improvement.
* The colors of actual products may be more or less different from those printed in this catalog.
All rights reserved.
As of January 2017
Created by Highly Experienced Hydraulic Equipment Makers.
263 Tanjo, Mihara-ku, Sakai-city, Osaka 587-0011, JAPAN. TEL 81-723-61-7861 FAX 81-723-62-2102
URL : http://www.opk.co.jp
No.0989-ISO9001(全社)�
No.E933-ISO14001(本社)�