hi-scan pro_ppt
TRANSCRIPT
-
8/10/2019 hi-scan pro_ppt
1/26
Hi-Scan Pro
-
8/10/2019 hi-scan pro_ppt
2/26
1. Main Functions
2. System Overview General
3. Vehicle Diagnosis
4. Tool Box
5. Miscellaneous Functions
Introduction of Hi-Scan Pro
-
8/10/2019 hi-scan pro_ppt
3/26
Main Functions
Diagnostic Communication with all kinds of vehicles
OBD-II and International Protocol Support
Hi-Speed 2 Channel Oscilloscope
Advanced Multi-Meter Test Function
- Voltage, Frequency, Duty, Resistance, etc.
Actuator Driving test and Sensor Simulation
PC Interface (PC-SCAN)
-
8/10/2019 hi-scan pro_ppt
4/26
System Overview
-
8/10/2019 hi-scan pro_ppt
5/26
Vehicle Diagnosis (Scan Functions)
1. Diagnostic Trouble Codes
2. Current Data
3. Flight Record
4. Actuation Test
5. Simu-Scan
6. Other Functions
-
8/10/2019 hi-scan pro_ppt
6/26
Diagnostic Trouble Codes
Display all DTC for the selected ECM
DTC Erasing Function
Abundant Tips Information for Repair
Direct Link to Part Analysis
On-line Operation Guide ( HELP )
Function
Shift + F6 = All Diag. code Display
-
8/10/2019 hi-scan pro_ppt
7/26
Current Data
Display Current Sensor ValuesAbundant Tips Information
Data Recording Available even in
Running Condition
Graphic Mode Display
Direct Link to Part Analysis
Software Function Key support
- FIX, PART, FULL, HELP,
GRPH, RCRD
-
8/10/2019 hi-scan pro_ppt
8/26
Flight Record
Record Current Sensor Values up to 8items at once
Graphic Display Review for the
Recorded Data
Memory Expansion to SupplementaryS-RAM Card
-
8/10/2019 hi-scan pro_ppt
9/26
Actuation Test
Allow each actuator to be
forcibly driven by Hi-Scan
Pro
On-Line Testing Condition and
Method Guide Support
-
8/10/2019 hi-scan pro_ppt
10/26
Simu-Scan
Display current data with direct
sensor simulation and meter
test simultaneously
Voltage, Frequency & Dutysimulation
Voltage, Frequency and Ohm
meter test
-
8/10/2019 hi-scan pro_ppt
11/26
Tool Box
1. Part Analysis (Engine/Auto Transaxle)
2. Symptom Analysis
3. Troubleshooting Pack
4. Oscilloscope (Normal Mode)
5. Oscilloscope (Record Mode)
6. Multi Meter
7. Actuator Driving
8. Sensor Simulation
-
8/10/2019 hi-scan pro_ppt
12/26
Available Items
- Engine : 39 Sensor Items
- Auto T/A : 14 Sensor Items
Auto-set DB support- Various levels of Oscilloscope
parameters such as
Voltage, Time division,
Trigger point, etc.
Part Analysis
-
8/10/2019 hi-scan pro_ppt
13/26
Part Analysis
Direct Part Trouble Diagnosis through Pre-Set Oscilloscope
Function and Repair Information
Easy & Direct Link from Any Mode
- From DTC, Current Data and DVOM modes.
-
8/10/2019 hi-scan pro_ppt
14/26
Easy-Traceable diagnostic flow per each trouble Symptom.
Symptom Analysis
-
8/10/2019 hi-scan pro_ppt
15/26
Combination Display with Part Analysis
-
8/10/2019 hi-scan pro_ppt
16/26
Tips
Provide basic and major information to help understand eachtrouble code and part.
Troubleshooting Pack
-
8/10/2019 hi-scan pro_ppt
17/26
Provide Regular or Irregular waveforms for reference.
Waveform Reference
-
8/10/2019 hi-scan pro_ppt
18/26
Provide Field experience for reference
Case study
-
8/10/2019 hi-scan pro_ppt
19/26
Circuit Diagram
Shown in Hi-SCAN Pro
Provide relevant schematic diagram for engine & Auto T/A.
-
8/10/2019 hi-scan pro_ppt
20/26
Flow Chart
Provide recommended diagnostic troubleshooting procedures
-
8/10/2019 hi-scan pro_ppt
21/26
Oscilloscope ( Normal Mode )
2 Channel Digital Storage ScopeSampling Speed : 1 Mhz / Sec
Time Division : 20~50s
Voltage Division : 0.2 V ~ 50V
Selectable Trigger Functions
(Mode / Source/ Level / Delay)Adjustable GND Level
Hold current waveform on screen
Cursor Data Display
Waveform Zoom function
(1x, 2x, 5x)
-
8/10/2019 hi-scan pro_ppt
22/26
Oscilloscope (Record Mode)
Larger Record Space
- 128 KB continuous samplingavailable
Video Replay View
Trend View Functions (Average, Min-Max, Frequency, Duty)
Hold current waveform on screen
Cursor Data DisplayWaveform Zoom function
(1x, 2x, 5x)
-
8/10/2019 hi-scan pro_ppt
23/26
Multi Meter
2 Channel Multi Meter
Volt Meter : Max. 500VDC
Frequency Meter: 0 ~ 100 KHz
Duty Meter : 0 ~ 100 %
Ohm Meter : 0 ~ 10
Automatic Unit Conversion
(Current Meter / Temperature
Meter / Pressure Meter )
-
8/10/2019 hi-scan pro_ppt
24/26
Actuator Driving
Direct Actuator Driving throughCable
Applicable Parameters
- Frequency
- Duty
- Period
-
8/10/2019 hi-scan pro_ppt
25/26
Sensor Simulation
Direct Sensor Simulation
Voltage Simulation : 0 ~ 5V
Frequency Simulation : 0 ~ 100 Hz
Duty Simulation : 0 ~ 100%
Vehicle Speed Simulation
-
8/10/2019 hi-scan pro_ppt
26/26
Miscellaneous Functions
System Set up function
Auto Self-Test Support
Printer
- Hi-Scan Pro Printer
- Auto Check Printer
- PC Printer by PC-SCAN
Program
PC Interface (RS232 Port)
Program Downloading via
Internet