how to use - roadtrucker inc. · 2016-02-03 · the pin master is designed to provide a safe and...
TRANSCRIPT
The Pin Master is designed
to provide a safe and time saving solution to assist drivers with the Tandem Sliding Axles.
HOW TO USE
Step 1 Step 2 Step 3
Place the hook and foot of The Pin Master To activate The Pin Master simply turn the knob After sliding the Tandem Slide Axles to the
between the Tandem Axle Release Handle to the left and The Pin Master will extend pulling desired location, remove The Pin
frame of the trailer. Place the hook the Tandem Slide Release Handle and releasing the Master by placing both hands on the handle
against the Tandem Slide Release Handle. pins. Slide the Tandem Axles. and turning quickly to the left. Reset the
Tandem Slide pins.
Step 4 Step 5 Step 6
To reload The Pin Maser, align the point on Push down until it stops, turn the knob to the The Pin Master is now ready for the next the hook with the notch on the foot, turn the right to lock and reload. Tandem Slide Axle. Knob to left until it stops.
See the complete instruction video on http://www.longhaultools.com
PO Box 1874 Hayden, ID 83835