i. how to recognize axle manufacturer
DESCRIPTION
I. How to recognize AXLE manufacturer. 1. Recognizing by product No. Unavailable to confirm AXLE company. Available to confirm AXLE company. - In case of the blank as on the left side of picture, It is unavailable to recognize AXLE company : Go on page 2 and 3 - PowerPoint PPT PresentationTRANSCRIPT
I. How to recognize AXLE manufacturer1. Recognizing by product No.
Unavailable to confirm AXLE company Available to confirm AXLE company
- In case of the blank as on the left side of picture, It is unavailable to recognize AXLE company : Go on page 2 and 3
* Recognizing AXLE manufacturer after checking BAR CODE on the tag
- If the first letter starts with Alphabet(ex. DRHG40517002C) : KSC
- If the first letter starts with digit(ex. 6300CY5616118D) : T.I
TYPE KSC TONGIL
CURRENT MANUFACTURER HYUDAI DYMOS S&TFRT REAR FRT REAR
EPC Cat. All Model 4120 4210 4121 4211Rodius(Stavic) 4120 4220 4121 4220
-
II. Recognizing AXLE manufacturer after checking AXLE BAR CODE2. Recognizing the manufacturer after seeing AXLE installed: In case of KSC
Marked manufacturer LOT
Wheel bolt:Black color
Drain plug: 9.25mm
AXLE BAR CODE(manufacturer)
AXLE MODULE BAR CODE
*.module company(HYURIM)Mounting bolt:Black color AXLE BAR CODE(manufacturer)
*. KSC(HYUNDAI DYMOS )
II. Recognizing AXLE manufacturer after checking AXLE BAR CODE3. Recognizing the manufacturer after seeing AXLE installed: In case of T.I or S&T (a.k.a TONGIL type)
Marked manufacturer LOT
Wheel bolt
:Yellow color
AXLE BAR CODE(manufacturer)
Drain plug: 12.7mm AXLE MODULE BAR CODE
*.module company(HYURIM) Mounting bolt:Yellow color AXLE BAR CODE(manufacturer)
*. T.I(S & T) : Marked Number
digit: Day (01 ~ 31)
digit: Se-rial Number (001 ~ 999)
Digit or alphabet: Month (01 ~ 09→January ~SeptemberA →October, B →November, C →December
digit: Year (2→2002)
III. How to recognize AXLE SHAFT TYPE 4. SINGLE & DOUBLE BEARING
.- Although it has changed since Dec. 1st, 2007, it is available to use for any vehicle both before and after that day .
.- By changing BEARING TYPE, SHAFT & HUB OTR BEARING is changed as well.
.- Single & DOUBLE BEARING cannot be simultaneously installed. (ex. SINGLE TYPE – SINGLE TYPE SHAFT)
SINGLE BEARING TYPE DOUBLE BEARING TYPE
5. How to recognize through ITEM INDEX after searching Product No
T/M : A/T M/T
T/C : 2WD & P/Time & AWD
AXLE RATIO : 3.31R / 4.27R**
LSD : NON-LSD / LSD
SUSP : 5-LINK / M LINK
SUSP : 5-LINK / M LINK