index traub ergomat mas - turlothis catalog does not show original schütte parts and accessories,...
TRANSCRIPT
This catalog does not show original Schütte parts and accessories, but all the parts and accessories in this catalog are made by Turlo Srl
INDEXTRAUB
ERGOMATMAS
catalog 2013
Edizione catalogo / Catalogue issue: 05/2013
POLYGON-GENERATING AND THREAD-MILLING ATTACHMENTAPPARECCHIO POLIGONATORE E FRESAFILETTI
MEHRKANTDREH UND GEWINDEFRASEINRICHTUNGAPPAREIL A POLYGONER ET FRESAIR LES FILETS
POLIGONADOR Y FRESADOR DE ROSCAS GERADOR DE POLÍGONOS E FRESADOR DE ROSCAS
SPARE PARTS AND ATTACHMENT FOR MULTISPINDLE MACHINES
TURLO S.r.l. Via Tagliaferro 3
13019 VARALLO SESIA (VC) ITALY Tel (0039) 0163 54446
Fax (0039) 0163 54226Email: [email protected] website: www.turlo.it
INDEX C19 - C29 INDEX B30 - B42 - B60 Polygon Generating / Thread Milling Attachment
This attachment is made up as follows: - Driving Pulley
- 2 Belts
- 2 Driven Pulleys
- Electromagnetic clutch with its support
- Telescopic Spline Shaft
- Toolbox with 5 helical gears inside
- Safety guard
- Electric Box
- Microswitch + Cam.
We started to manufacture this attachment in 1980. There are currently more than 600 of them operating in Italy, where it is surely more popular than the original one. It is preferred because of its great power and sturdiness, that allows the heaviest jobs. The structure of the attachment is very simple and it can be easily fitted by anyone who follows the in-struction manual. The power is taken from the back of the bar spindle of the machine and it is transmitted by an electromag-netic clutch only when the attachment is in the working phase of the cycle. The thread-milling and the polygon-generating operations are based on a different turning ratio (1:1 , 2:1). The ratio can be changed very easily by changing the belt and the pulley, that is fitted on the clutch. We suggest that this attachment should machine only metals like brass, bronze, copper and aluminium. All the items necessary for the installation are provided.
INDEX ER25 Polygon Generating / Thread Milling Attachment
This attachment is made up as follows: - Driving Pulley
- 2 Belts
- 2 Driven Pulleys
- Electromagnetic clutch with its support
- Telescopic Spline Shaft
- Toolbox with 5 helical gears inside
- Safety guard
- Electric Box
- Microswitch + Cam.
Our attachment is preferred to the original one because of its great power and sturdiness, that allows the heaviest jobs. The structure of the attachment is very simple and it can be easily fitted by anyone who follows the instruc-tion manual. The power is taken from the back of the bar spindle of the machine and it is transmitted by an electromag-netic clutch only when the attachment is in the working phase of the cycle.
The thread-milling and the polygon-generating operations are based on a different turning ratio (1:1 , 2:1). The ratio can be changed very easily by changing the belt and the pulley, that is fitted on the clutch. We suggest that this attachment should machine only metals like brass, bronze, copper and alu-minium. All the items necessary for the installation are provided.
INDEX E/ER30 - ER42 Polygon Generating / Thread Milling Attachment
This attachment is made up as follows:
- Driving Pulley
- Belt
- Driven Pulley
- Electromagnetic Clutch with its support
- Telescopic Spline Shaft
- Toolbox with 6 helical gears inside
- Safe Carter
- Electric Box
- Microswitch + Cam
- Hydraulic Cross Slide
- Original Toolholder adapted.
The original weak slide is replaced with our hydraulic one, that is able to carry our tool-holder gear-box. Our slide can also be used for ordinary turning operations, in fact we supply a toolholder for original Index tools, together with the attachment. The thread-milling operation and the polygon-generating one are based on a different turning ratio (1:1 , 2:1). The ratio can be changed very easily by inserting the telescopic shaft into one of the two drives at the rear of the gear-box. The power is taken from the back of the main spindle of the machine and it is transmitted by an electromagnetic clutch only when the attachment is in operation. All the items necessary for the installation are provided. The installation is very easy since it does not require any major changes in the machine. The attachment can also generate three flat sides on the component.
It is preferred because of its great power and sturdiness, that allows the heaviest jobs.
The structure of the attachment is very simple and it can be easily
fitted by anyone who follows the instruction manual.
The power is taken from the back of the bar spindle of the machine and it is trasmitted by an electromagnetic
clutch only when the attachment is in the working phase of the cycle.
The thread-milling and the polygon-generating operations are based on a different turning ratio (1:1 , 2:1). The
ratio can be changed very easily by changing the belt and the pulley, that is fitted on the clutch.
INDEX DG12 Polygon Generating / Thread Milling Attachment
This attachment is made up as follows: - Driving Pulley
- 2 Belts
- 2 Driven Pulleys
- Electromagnetic clutch with its support
- Telescopic Spline Shaft
- Toolbox with 3 helical gears inside
- Safety guard
- Electric Box
- Microswitch + Cam.
TRAUB A15 - A25 Polygon Generating / Thread Milling Attachment
This attachment is made up as follows: - Driving Pulley
- 2 Belts
- 2 Driven Pulleys
- Pulley support
- Telescopic Spline Shaft
- Toolbox with 3 helical gears inside
We take the motion from the back of the bar-spindle with a driving pulley, so we are able to fit
a stronger telescopic spline shaft that makes easy the most difficult jobs on this machine.
Moreover we use the same toolbox to do both the operations (polygon generating ad thread
milling): you just need to change the driven pulley on the back with the other one that is sup-
plied with the attachment.
TRAUB TB42 - TB60 TRAUB TK42 - TK60 Polygon Generating / Thread Milling Attachment
This attachment is made up as follows: - Driving Pulley
- 2 Belts
- 2 Driven Pulleys
- Pulley support
- Telescopic Spline Shaft
- Toolbox with 5 helical gears inside
We take the motion from the back of the bar-spindle with a driving pulley, so we are able to fit
a stronger telescopic spline shaft that makes easy the most difficult jobs on this machine.
Moreover we use the same toolbox to do both the operations (polygon generating ad thread
milling): you just need to change the driven pulley on the back with the other one that is sup-
plied with the attachment.
ERGOMAT TBA42 TBA60 Polygon Generating / Thread Milling Attachment
We take the motion from the back of the bar-spindle with a driving pulley, so we are able to
fit a stronger telescopic spline shaft that makes easy the most difficult jobs on this machine.
Moreover we use the same toolbox to do both the operations (polygon-generating and
thread-milling): you just need to change the driven pulley on the back with the other one
that is supplied with the attachment.
MAS A26 CNC Polygon Generating / Thread Milling Attachment
This attachment is made up as follows:
- Driving Pulley
- Belt
- Driven Pulley
- Electromagnetic Clutch with its support
- Telescopic Spline Shaft
- Toolbox with 6 helical gears inside
- Electric Box
- Microswitch
The thread-milling operation and the polygon-generating one are based on a different turning ratio
(1:1 , 2:1). The ratio can be changed very easily by inserting the telescopic shaft into one of the two
drives at the rear of the gear-box.
The power is taken from the back of the main spindle of the machine and it is transmitted by an
electromagnetic clutch only when the attachment is in operation.
All the items necessary for the installation are provided.
The installation is very easy since it does not require any major changes in the machine.