industrial investment opportunities in sec

الفرص االستثمارية الصناعيةفي توطين صناعات الكهرباء

الفرص االستثمارية الصناعيةفي توطين صناعات الكهرباء

2016

2

المحتويات

المقدمة

محفزات االستثمار في صناعة الكهرباء

استراتيجية توطين صناعات الكهرباء

الفرص االستثمارية لقطع غيار ومعدات التوزيع

الفرص االستثمارية لقطع غيار ومعدات التوليد

الفرص االستثمارية لقطع غيار ومعدات النقل

4

5

8

9

65

77

3

إخالء مسؤوليةللكهرباء السعودية بالشركة الغيار قطع و المواد احتياج في االستثمارية الفرص كتيب قراءة لك نشكرك واعطائه من وقتك الثمين ، ونود اخبارك ان الشركة السعودية للكهرباء ، تقدم هذا الكتيب كخدمة للمهتمين هذا لمحتويات والدقة الجودة من عالي مستوى لتحقيق كبير جهد بذا تم وقد الكهرباء. صناعة بتوطين الكتيب، إال أن محتويات هذا الكتيب تم تقديمها باعتبارها معلومات عامة ولالستعمال التثقيفي فقط. وال تعتبر

توصية تجارية أو مالية.

التواصلالشركة على استعداد تام لعقد اجتماعات و ورش عمل مع المصنعين و رجال األعمال و المستثمرين في الفرص لعمل المتوقعة الكميات وبيانات المعتمدة والمقاييس والمواصفات المعلومات بجميع تزويدهم و المتاحة دراسات الجدوى االقتصادية الالزمة لذلك. كما يمكنكم االطالع على عينات من هذه الفرص في معرض الفرص

االستثمارية الواقع بمستودعات الشركة بالرياض - الدرعية.

لمزيد من االستفسار يمكن التواصل مع:[email protected] فريق مشروع توطين صناعات الكهرباء بريد الكتروني

مدير مشروع التوطين : بريد الكتروني [email protected] هاتف: 8079724 (011) قائد فريق المشروع : بريد الكتروني [email protected] هاتف: 6537832 (012)

4

المقدمة:

في هائلة زيادة ذلك يماثل والعقاري الصناعي المستوى على هائاًل توسعًا السعودية العربية المملكة تشهد االحتياج للطاقة الكهربائية كون الطاقة عصب التطور والنماء في كافة مجاالت الحياة. ان هذا الطلب يبشر بسوق

كبير لالستثمارات في مجال الطاقة الكهربائية وصناعتها المتعددة.

الكهرباء صناعات توطين لتعزيز االجتماعية مسؤوليتنا منطلق ومن للكهرباء السعودية الشركة في ونحن وتطوير المحلية الصناعات دعم خالل من السعودية العربية المملكة اقتصاد على المضافة القيمة وخلق مستويات توطين الصناعة من خالل فتح مصانع محلية ونقل المعرفة والتقنية وتعزيز األبحاث والتطوير وخلق

فرص عمل للشباب السعودي.

صناعة مجال في الغيار وقطع والمعدات المواد تصنيع في االستثمارية الفرص آفاق لفتح الكتيب هذا ويهدف الكهرباء ايمانًا منا بحجم العوائد الكبيرة ماليًا وخلق فرص عمل للشباب السعودي الطموح لخدمة نفسه ومجتمعه

ووطنه، ونحن بذلك نؤسس لتوطين صناعة حقيقي في مجال صناعة الكهرباء والخدمات المساندة لها.

5

محفزات االستثمار في صناعة الكهرباء

يوجد محفزات للدخول في صناعة الكهرباء وهذه المحفزات ستكون مساهمة وفاعلة في دعم المستثمرين الراغبين في االستثمار والتصنيع المحلي ، ومن هذه المحفزات مايلي:

ظل في الكهربائية الطاقة على الطلب في المتسارع النمو هو الكهرباء لصناعات الرئيسي المحرك يظل أواًل: النهضة االقتصادية التي تمر بها المملكة العربية السعودية ويعد نمو الطلب على الطاقة في المملكة العربية

السعودية االعلى عالميًا:

90,000

80,000

70,000

60,000

50,000

40,000

30,000

20,000

10,000

2014 2015 2016 2017 2018 2019 20200

54,117 58,740 63,60468,278

74,450 78,680 82,604

6

ثانيًا: تنامي حجم االستثمارات الرأسمالية المخططة لتنفيذ مشاريع محطات التوليد وشبكات النقل والتوزيع والتي بلغت 509 مليار ريال خالل عام 2015م والخطة الخمسية 2020-2016م لمواجهة الطلب على الطاقة الكهربائية:

90,000

100,000

80,000

70,00060,000

50,000

40,000

30,00020,000

10,000

2014 2015 2016 2017 2018 2019 20200

54,872

89,327

77,839 84,25586,472 88,516

82,469

7

ثالثًا: نمو حجم استهالك مواد المخزون لتنفيذ الصيانات لمحطات التوليد وشبكات النقل ومشاريع التوزيع والتي بلغت 9 مليار ريال بنهاية عام 2014م:

9,000

10,000

8,000

7,0006,000

5,000

4,000

3,0002,000

1,000

2007 2008 2009 2010 2011 2012 2013 20140

6,892

5,804

4,7775,0484,9544,173

8,3609,018

8

استراتيجية توطين صناعات الكهرباء:

االولى المبادرة وضع سياسات وآليات

للمقاولين تحفيز

الثانية المبادرة وضع سياسات وآليات

المحلية للمصانع تحفيز

الثالثة المبادرة التوطين تحديد فرص

المواد بصناعات

والمقبولة المقدمة العروض تقيم بناء على معادلة تحفيز مبنية على

التالية: المعايير العطاء سعر العمالة توطين نسبة المصنعة المواد استخدام نسبة

محليًا

مجموع النقاط = نقاط سعر العطاء + نقاط توطين العمالة + نقاط

محليًا المصنعة المنتجات استخدام

ويكون العرض الفائز هو العرض اعلى. نقاط مجموع على المتحصل

االولى: المرحلة في اولوية الوطنية المنتجات تعطى

% 10 الشراء على مثيالتها االجنبية بنسبة

الثانية: المرحلة حسب المحليين للمصنعين تفضيل

المصنع. لدى المحلي المحتوى التالية: المعايير على ويعتمد

العطاء سعر للمصنع المحلي المحتوى للشركة المنتج اهمية درجة

يلي: كما التحفيز معادلة لتصبح العطاء سعر المفاضلة= سعر

المحلي( التفضيل نسبة -1(نسبة = المحلي التفضيل نسبة

نسبة x للمصنع المحلي المحتوى للشركة المنتج أهمية

التوطين في صناعات تحديد فرص المطلوبة، الغيار وقطع المواد

والشركات المستثمرين مع والعمل إلنشاء الستقطابهم العالمية

محلية. مصانع

الجهات مع والتواصل التنسيق تعزيز في الكبرى والشركات الحكومية

بين المشتركة واللجان المملكة المملكة والدول األخرى ذات العالقة

الصناعة. لتوطين

مع استراتيجية شراكة عمل مصانع فتح الراغبين المستثمرين الغير متوفرة الغيار لمواد وقطع

. محليًا

9

Investment Opportunities For Distribution Spare Parts and Equipment

ITEM:908331008

STANDARD:33-SDMS-01 REV.0

NO OF EXISTING LOCAL FACTORIES:N/A

USAGE VALUE 2009-2014 (million SR)

29.6

5-YEARS FORECASTED DEMAND (MILLION SR):

80

DESCRIPTION: RECLOSER,AUTOMATIC, POLE MOUNTED,13.8/15.2 KV (MAX), 3P, 60 HZ,110 KV ,552 MM CREEPAGE

USAGE: USED FOR 13.8 KV OHL DIST SYSTEM TO DETECT AND INTERRUPTED THE MOMENTARY FAULT, RESTORE THE POWER AFTER CLEARING THE FAULT.

92

10

ITEM:908331004




29.10


62

DESCRIPTION: RECLOSER, AUTOMATIC, POLE MOUNTED, 33/36 KV (MAX), 3P, 60 HZ, 200 KV BIL, 1320 MM CREEPAGE

USAGE: USED FOR 33 KV OHL DIST SYSTEM TO DETECT AND INTERRUPTED THE MOMENTARY FAULT, RESTORE THE POWER AFTER CLEARING THE FAULT


91

11

ITEM:908121038




39.28


32

DESCRIPTION: ELECTRICAL CONNECTOR, ELBOW, 3C X 185/35 SQMM, 15 KV, 400 A, 95 KV BIL

USAGE: USED FOR END TERMINATION OF MV CABLES IN ORDER TO CONNECT PROPERLY THE CABLE TO EQUIPMENT TERMINAL.


90

12

ITEM:908121004




41.22


10

DESCRIPTION: SPLICE KIT:CABLE, 15 KV, 3 PH, CU, XLPE/PVC, UNARMORED, 3C X 185/35 SQMM

USAGE: USED TO JOINT END-TO-END OF TWO CONDUCTORS IN 36 KV UNDERGROUND CABLES.


89

13

ITEM:908121005




33.45


15

DESCRIPTION: SPLICE KIT: CABLE, 15 KV, 3 PH, CU, XLPE/PVC, ARMORED, 3C X 300/35 SQMM

USAGE: USED TO JOINT END-TO-END OF TWO CONDUCTORS IN 36 KV UNDERGROUND CABLES.


88

14

ITEM:908382000

STANDARD:38.SDMS-02 REV.0



24.93


67

DESCRIPTION: INDICATOR:FAULT, AUTO RESET,O/H, 500 A MAX

USAGE: INDICATOR:FAULT, AUTO RESET,O/H, 500 A MAX


87

15

ITEM:908421001

STANDARD:42-SDMS-01.REV.4

NO OF EXISTING LOCAL FACTORIES:4


328.03


226

DESCRIPTION: BOX:METER, OUTDOOR, 1 CUST, 380 VAC, 160 A

USAGE: USED AS ENCLOSURES FOR ENERGY REVENUE METERS.


86

16

ITEM:908421005




43.28


70

DESCRIPTION: BOX:METER, OUTDOOR,1 CUST, 380 VAC, 200 A



85

17

ITEM:908421006




37.35


51

DESCRIPTION: BOX:METER, OUTDOOR, 1 CUST, 380 VAC, 300/400 A



84

18

ITEM:908421002

STANDARD:42-SDMS-01.REV.4 NO OF EXISTING LOCAL FACTORIES:4


108.43


167




83

19

ITEM:908421003




227.46


292




82

20

ITEM:908301015

STANDARD:30-SDMS-01



35.62


90

DESCRIPTION: SWITCH:DISCONNECT, OVERHEAD, 33 KV, 3P, 60 HZ, 600 A

USAGE: USED TO DISCONNECT / BY--PASS THE AUTO VOLTAGE REGULATOR FROM 33 KV OHL DIST SYSTEM.


81

21

ITEM:908312002

STANDARD:31-SDMS-02. REV.1



28.96


32

DESCRIPTION: BASE, PILLAR DIST LV, GLASS REINFORCED

USAGE: USED TO HOLD / SUPPORT THE FUSE PILLAR.


80

22

ITEM:908312001

STANDARD:31-SDMS-02. REV.1 NO OF EXISTING LOCAL FACTORIES:4


171.20


248

DESCRIPTION: PILLAR,LV DISTRIBUTION (WITH BASE), FIBERGLASS

USAGE: USED FOR THE DISTRIBUTION OF ELECTRICITY POWER TO CONSUMERS.


79

23

ITEM:908312003

STANDARD:31-SDMS-02. REV.1



249.49


259

DESCRIPTION: PILLAR,LV DISTRIBUTION (WITHOUT BASE), FIBERGLASS

USAGE: USED FOR THE DISTRIBUTION OF ELECTRICITY POWER TO CONSUMERS.


78

24

ITEM:908351004

STANDARD:35-SDMS-01 REV.0 NO OF EXISTING LOCAL FACTORIES:N/A


50.96


59

DESCRIPTION: ARRESTER:SURGE,200 KV BIL, 1320 MM CREEPAGE, METAL OXIDE, 36 KV

USAGE: USED FOR 13.8 KV OHL DIST SYSTEM AS PROTECTION AGAINST THE VOLTAGE SURGE.


77

25

ITEM:908371003




84.01


89

DESCRIPTION: CIRCUIT BREAKER, MOLDED CASE, 100 A, 750 VAC

USAGE: USED FOR THE PROTECTION OF OUTGOING FEEDER TO CONSUMER.


76

26

ITEM:908371001

STANDARD:37-SDMS-01 REV.2 NO OF EXISTING LOCAL FACTORIES:1


48.99


112




75

27

ITEM:908372001

STANDARD:37-SDMS-02



41.64


47




74

28

ITEM:908371007

STANDARD:37-SDMS-01 REV.2 NO OF EXISTING LOCAL FACTORIES:1


26.70


38




73

29

ITEM:908371002




113.06


158




72

30

ITEM:908402101

STANDARD:40-SDMS-02A REV.7 NO OF EXISTING LOCAL FACTORIES:1


--


29.6

DESCRIPTION: METER:ELECTRICAL SERVICE,ELECTRONIC

USAGE: USED TO METER THE ENERGY CONSUMED BY THE CONSUMER


71

31

ITEM:908332004




35.60


74

DESCRIPTION: SECTIONELIZER, 33KV, 400A, 1320MM CREEPAGE

USAGE: USED TO AUTOMATICALLY ISOLATE THE CIRCUIT HAVING FAULT AND RECONNECT AFTER CLEARING THE FAULT OF THE OHL SYSTEM.


70

32

ITEM:908341003

STANDARD:34-SDMS-01 REV.0 NO OF EXISTING LOCAL FACTORIES:N/A


35.11


56

DESCRIPTION: CUTOUT, FUSE, 100A, 33KV, 825MM CREEPAGE

USAGE: INSTALLED IN THE OHL DIST SYSTEM WITH THE FUSE LINK, USED FOR SWITCHING AND TO PROTECT THE CONNECTED EQUIPMENTS.


69

33

ITEM:908341101

STANDARD:34-SDMS-01



49.31


78

DESCRIPTION: CUTOUT, FUSE, 100A, 13.8KV, 660MM CREEPAGE

USAGE: INSTALLED IN THE OHL DIST SYSTEM WITH THE FUSE LINK, USED FOR SWITCHING AND TO PROTECT THE CONNECTED EQUIPMENTS..


68

34

ITEM:908341104

STANDARD:34-SDMS-01 NO OF EXISTING LOCAL FACTORIES:N/A


31.76


40

DESCRIPTION: CUTOUT, FUSE, 100A, 33KV, 1320MM CREEPAGE

USAGE: INSTALLED IN THE OHL DIST SYSTEM WITH THE FUSE LINK, USED FOR SWITCHING AND TO PROTECT THE CONNECTED EQUIPMENTS


67

35

ITEM:908202012

STANDARD:20-SDMS-02



9


47

DESCRIPTION: BOLT, MACHINE, 20 MM DIA, 60 MM LG, HEX HD, GALV STEEL, WITH (2) FLAT WASHERS, (1) SPRING LOCK AND (1) HEX NUT.

USAGE: USED AS FASTENERS FOR OVERHEAD LINES.


66

36

ITEM:908202033



12


29

DESCRIPTION: SLEEVE, STRAPPING BAND, 24 MM WD X 4.6 MM TH, PVC

USAGE: USED TO COVER THE STRAPPING BAND WHICH HOLD THE POLE IDENTIFICATION.


65

37

ITEM:908202042

STANDARD:20-SDMS-02



20


36

DESCRIPTION: PLATE,DOUBLE ARMING, 100 MM WD X 700 MM LG X 12 MM TH, GALV STEEL

USAGE: USED TO STRAP TOGETHER THE CROSSARM (DOUBLE CROSS ARM) AND THE SAME TIME SERVE AS POINT OF ATTACHMENT FOR THE DISC INSULATOR IN OHL SYSTEM.


64

38

ITEM:908202044



10


21

DESCRIPTION: SUPPORT,EARTHWIRE,HOT DIPPED GALV STEEL,(L-120 X 120) MM WD X 10 MM TH X 150 MM LG

USAGE: USED TO SECURE / SUPPORT THE EARTH CONDUCTOR BEING CONNECTED IN THE SYSTEM.


63

39

ITEM:908202050




18


125

DESCRIPTION: ROD:ARMOR,MERLIN 170.5 SQ MM ACSR/AW COND,5.18 MM DIA,1730 MM LG,ALUMINUM ALLOY,12

USAGE: WRAPPED AROUND ON THE CONDUCTOR, USED TO PROTECT THE CONDUCTOR AGAINST BENDING, COMPRESSION, ABRASSION, AND ARC-OVER, AND TO PROVIDE REPAIR.


62

40

ITEM:908202055



9


17

DESCRIPTION: SHACKLE,PIN,22 MM INSIDE WD,90 MM INSIDE LG,16 MM SHACKLE BODY DIA,16 MM DIA PIN,45 KN UTS MINIMUM LOAD,FORGED STEEL,HOT-DIPPED GALV

USAGE: USED AS A CONNECTING LINK FOR SUSPENSION INSULATOR SET.


61

41

ITEM:908202081

STANDARD:20-SDMS-02



16


29

DESCRIPTION: CHANNEL,FUSE CUTOUT MOUNTING,C-125 MM WD X 65 MM HT X 6MM TH X 2400 MM LG,HOT DIPPED GALV STEEL

USAGE: USED WHERE THE FUSE CUTOUT INSTALLED.


60

42

ITEM:908202082

STANDARD:20-SDMS-02 NO OF EXISTING LOCAL FACTORIES:2


22


32

DESCRIPTION: CHANNEL,TRANSFORMER MOUNTING,U-150 MM WD X 75 MM HT X 6.5 MM TH X 2400 MM LG,HOT DIPPED GALV STEEL

USAGE: USED AS TRANSFORMER MOUNTING.


59

43

ITEM:908202086

STANDARD:20-SDMS-02



14


18

DESCRIPTION: BAND:POLE,100 MM WD X 12 MM TH,HOT DIPPED GALV STEEL,166 MM DIA A/F

USAGE: INSTALLED ON THE UPPER TOP OF THE POLE WHERE THE GUY WIRE ATTACHED.


58

44

ITEM:908202094

STANDARD:20-SDMS-02



15


27

DESCRIPTION: CLAMP:STRAIN,14.31 MM DIA ACSR/AW COND,45 KN MIN UTS CAPACITY,ALLUMINUM ALLOY

USAGE: USED FOR CONDUCTOR FITTING IN OVERHEAD LINES.


57

45

ITEM:908202104

STANDARD:20-SDMS-02



15


25

DESCRIPTION: CONDUIT,FLEXIBLE,76 MM,1 M AND 110 MM LG,3 MM WALL TH,PVC,MALE X FEMALE FITTINGS

USAGE: USED AS A CONDUIT AND PROTECT THE CABLE IN LV DISTRIBUTION SYSTEM.


56

46

ITEM:908202186

STANDARD:20-SDMS-02



15


22

DESCRIPTION: CONNECTOR:ELECTRICAL,GROUND, C,100 TO 125 SQMM TO 16 MM DIA ROD COND

USAGE: USED FOR GROUNDING INSTALLATION IN OVERHEAD LINES.


55

47

ITEM:908202203

STANDARD:20-SDMS-02



10


15

DESCRIPTION: ROD:ANCHOR,DROP-FORGED TWIN THIMBLE EYE,24 MM DIA,2 M AND 500 MM LG,HOT DIPPED GALV STEEL

USAGE: USED TO WHERE THE GUY / STAY WIRE ATTACHED IN ORDER TO HOLD AND PREVENT THE POLE FROM LEANING.


54

48

ITEM:908202228

STANDARD:20-SDMS-02



22


126

DESCRIPTION: BRACE:CROSSARM,ONE END AND BOTH END CLIPPED,HOT DIPPED GALV STEEL

USAGE: USED TO SUPPORT THE CROSSARM IN OVERHEAD LINES.


53

49

ITEM:908202098

STANDARD:20-SDMS-02



36.91


49

DESCRIPTION: CLAMP, GROUNDING, 35-70SQMM CU,16MM DIA CUWLD STL

USAGE: USED FOR GROUNDING SYSTEM TO TERMINATE OR ATTACHED THE CABLE GROUNDING TO GROUND ROD.


52

50

ITEM:908202092

STANDARD:20-SDMS-02



30.78


49

DESCRIPTION: CLAMP, STRAIN, ALLUMINUM ALLOY, 3-BOLTS

USAGE: USED FOR OVERHEAD LINES TO HOLD OR CARRY THE CONDUCTOR IN PLACE.


51

51

ITEM:908202080

STANDARD:20-SDMS-02



254.57


302

DESCRIPTION: CROSSARM, METAL, STEEL, L100 WD X 100 HT X 12 TH X 2400 LG MM

USAGE: INSTALLED IN THE UPPER MOST PART OF THE POLE TO SUPPORT THE INSULATORS IN OHL SYSTEM.


50

52

ITEM:908202053

STANDARD:20-SDMS-02



28.60


46

DESCRIPTION: ROD, GROUND, CUWLD STL, 16MM DIA X 1200MM LG

USAGE: USED AS GROUNDING POINT OF THE EQUIPMENT AFTER THE ROD WAS DRIVEN DOWN THE EARTH.


49

53

ITEM:908202054

STANDARD:20-SDMS-02



61.35


69

DESCRIPTION: ROD, GROUND, CUWLD STL, 16MM DIA X 2400MM LG

USAGE: USED AS GROUNDING POINT OF THE EQUIPMENT AFTER THE ROD WAS DRIVEN DOWN THE EARTH.


48

54

ITEM:908202195

STANDARD:20-SDMS-02



29


29

DESCRIPTION: WIRE, GUY, STL, 12MM DIA, 7 STRAND

USAGE: USED AS WRAPPED AROUND THE POLE IN ORDER TO USED AS ANTI CLIMBING DEVICE.


47

55

ITEM:908202208

STANDARD:20-SDMS-02



4


3.5

DESCRIPTION: WIRE, GUY, STL, 9.8 MM DIA, 7 STRAND

USAGE: USED AS WRAPPED AROUND THE POLE IN ORDER TO USED AS ANTI CLIMBING DEVICE.


46

56

ITEM:908151003




67.44


72

DESCRIPTION: INSULATOR, POST, PORCELAIN, 35KV, 185MM DIA, 1320MM CREEPAGE

USAGE: USED FOR OHL SYSTEM TO HOLD IN PLACE, SUPPORT AND ISOLATE THE CONDUCTORS FORM THE GROUND.


45

57

ITEM:908151005




109.25


124

DESCRIPTION: INSULATOR, SUSPENSION, PORCELAIN, 254MM DIA, 292MM CREEPAGE

USAGE: FOR OHL SYSTEM TO HOLD IN PLACE, SUPPORT AND ISOLATE THE CONDUCTORS FORM THE GROUND.


44

58

ITEM:908151004




28.44


79

DESCRIPTION: INSULATOR, POST, PORCELAIN, 35KV, 178MM DIA X 368 MM LG, 825MM CREEPAGE



43

59

ITEM:908151003




46.4


72

DESCRIPTION: INSULATOR, POST, PORCELAIN, 35KV, 185MM DIA X 510 MM LG, 1320MM CREEPAGE



42

60

ITEM:908322005




68.82


90

DESCRIPTION: SWITCHGEAR:RMU, INDOOR, SF6 INSLT, 13.8KV, 95KV, 2 SW+ 1CB

USAGE: USED FOR SWITCHING POWER CABLE RING AND OF SWITCHES IN SERIES WITH CB / FUSES FOR THE PROTECTION OF DIST TFMR IN 33 KV SYSTEM.


41

61

ITEM:908321016

STANDARD:32-SDMS-01REV.2



107.78


246

DESCRIPTION: SWITCHGEAR:RMU, NON EXTENSIBLE SF6 INSLT, OUTDOOR, 13.8KV, 400A, 2 SW+ 2 CB

USAGE: USED FOR SWITCHING POWER CABLE RING AND OF SWITCHES IN SERIES WITH CB / FUSES FOR THE PROTECTION OF DIST TFMR IN 13.8 KV SYSTEM.


40

62

ITEM:908321011




91.60


131

DESCRIPTION: SWITCHGEAR:RMU, INDOOR, NON EXTENSIBLE SF6 INSLT, 13.8KV, 2 SW+ 1CB



39

63

ITEM:908321012




1,718


2,347




38

64

ITEM:908321014




286.60


493




37

65

ITEM:901010211



30.38


62

DESCRIPTION: BLADE SET:TURBINE, ROTOR, BUCKET, TURBINE SIDE, STAGE/ROW 2, 92 PIECES

REFERENCE NO. : GE 314B7166G038

Investment Opportunities For Generation Spare Parts and Equipment

36

66

ITEM:4642AA950



26.30


41

DESCRIPTION: BLADE:TURBINE, ROTOR, BUCKET, TURBINE SIDE, STAGE/ROW 1

REFERENCE NO. : GE 314B7165G030GE 932E0141P035


35

67

ITEM:167210930



29.26


37

DESCRIPTION: CASING:TURBINE,HOT GAS,TURBINE SIDE

REFERENCE NO. : ABB KWGZ0000028188ABB HTCT001059R0002


34

68

ITEM:155064570



42


42

DESCRIPTION: LINER:COMBUSTER,GE FRAME 7, 135 MM ID X 365 MM OD X 700 MM LG, STL

REFERENCE NO. : GE 111E8962G003GE 111E8962G004


33

69

ITEM:4641AH228



37.64


37

DESCRIPTION: PIECE:TRANSITION, 380 MM DIA X 78 MM WD X 505 MM LG X 1 M AND 70 MM HT, CAST STL

REFERENCE NO. : GE 943E0236G028GE 943E0236G036GE 943E0236G023


32

70

ITEM:901019057



18.70


31

DESCRIPTION: PIECE:TRANSITION,GE FRAME 7EA



31

71

ITEM:155076010



124.97


104

DESCRIPTION: PIECE:TRANSITION,GE FRAME 7



30

72

ITEM:168420730



47.25


40

DESCRIPTION: PIECE:TRANSITION, WESTINGHOUSE

REFERENCE NO. : SIEMENS 2076J11001


29

73

ITEM:901010213



30.8


68

DESCRIPTION: VANE SET, TURBINE,STATOR:NOZZLE, FIRST STAGE/ROW, 18 SEGMENTS PIECES



28

74

ITEM:167068270



48.98


131

DESCRIPTION: VANE SET, TURBINE,STATOR:TURBINE SIDE, STAGE/ROW 5, 118 PIECES

REFERENCE NO. : ABB KWGZ0000000440


27

75

ITEM:400009430



29.98


40

DESCRIPTION: VANE:TURBINE, STATOR,TURBINE SIDE,STAGE/ROW 2

REFERENCE NO. : ABB TGT497199P0001ABB KWGZ0000019929


26

76

ITEM:168501190



23.58


30

DESCRIPTION: VANE,TURBINE,STATOR:VANE SEGMENT,TURBINE SIDE,STAGE/ROW 2

REFERENCE NO. : WESTINGHOUSE 1255E93G01WESTINGHOUSE 46E012H02


25

77

REF:1.1



1,785


3,022

DESCRIPTION: Power Transformer 67 MVA

STANDARD: 53-TMSS-01

Investment Opportunities For Transmission Spare Parts and Equipment

24

78

REF:1.2



343


574




23

79

REF:1.3



1,262


2,107




22

80

REF:1.4



840


1,428

DESCRIPTION: Gas-Insulated Switchgear (GIS) 110 KV



21

81

REF:1.5



351


585




20

82

REF:1.6



1,064


1,796




19

83

REF:1.7



2,125


3,485




18

84

REF:1.8



285


442

DESCRIPTION: Overhead Conductor 110 KV



17

85

REF:1.9



343


499




16

86

REF:1.10



4,905


7,055




15

87

REF:1.11



2,511


3,778

DESCRIPTION: Underground Cable 110 KV XLPE



14

88

REF:1.12



1,310


1,833




13

89

REF:1.13



4,344


6,516




12

90

REF:1.14



5,688


8,532




11

91

REF:1.15



891


1,692

DESCRIPTION: Air-Insulated Switchgear (AIS) 13.8 KV



10

REF:1.16



181


271

DESCRIPTION: Air-Insulated Switchgear (AIS) 33 KV



929

Local content Development Strategic

SEC local development strategic plan includes three major initiatives to encourage and support local manufacturing as follows:

Evaluate the accepted offers based on the following criteria:o The bid price (85 points)o Saudization % (5 points)o % of using the local manufacturing part in the project (10 points)

The Premium formula as:Total points = bid price pints + Saudization points + Using the local manufacturing points

Phase 1:10% preference in quoted price for the local manufacturing partsPhase 2:Preference for local manufacturers according to their local content value as the following criteria:o The bid priceo Manufacturer local content % (M.L.C %)o Commodity incentive (C.I%)The Premium formula as:Comparative price = bid price x (1 – Local preference %)Where:Local preference % = (M.L.C % x C.I% )

o Identify investment opportunities in materials and spare parts, and working with investors and international companies to attract them to the local industry market.

o Enhance coordination and communication with government organizations and big private corporations to develop local content value of KSA.

o Establish a strategic partnership with investors to open factories for materials and spare parts are not available locally.

Initiative #1Develop policies and

proceduresto motivate contractors

Initiative #2Develop policies and

proceduresto motivate local manufacturers

Initiative #3 Identify investment

opportunities for localization

8

Third: The growth in the volume of consuming stock materials for maintenance which reached 9 Billion Saudi Riyals by the end of 2014.

9,000

10,000

8,000

7,0006,000

5,000

4,000

3,0002,000

1,000

2007 2008 2009 2010 2011 2012 2013 20140

6,892

5,804

4,7775,0484,9544,173

8,3609,018

7

Second: The development of the planned capital investments to implement the projects of Generation Power Plant, Transmission Networks and Distribution Networks which reached 509 Billion Saudi Riyals in 2015. Also, There is a five-Years plan to face the demand of electricity.

90,000

100,000

80,000

70,00060,000

50,000

40,000

30,00020,000

10,000

2014 2015 2016 2017 2018 2019 20200

54,872

89,327

77,839 84,25586,472 88,516

82,469

6

Motivations To Invest In Electricity Industry:

First: The growth in electricity demand considered as the highest electricity demand in the world:

90,000

80,000

70,000

60,000

50,000

40,000

30,000

20,000

10,000

2014 2015 2016 2017 2018 2019 20200

54,117 58,740 63,60468,278

74,450 78,680 82,604

5

Introduction

Saudi Arabia is experiencing a tremendous expansion of industrial and real estate sectors and accompanied by a massive increase in the need for electric power energy due to the essential role of the electric power in the development and growth in all areas of life. This huge demand of the electrical power bodes market demand for large investments in the field of electric power and its support services industry.

We are in the Saudi Electricity Company based on our social responsibility seeks to enhance the localization of the electricity industry and the creation of added value to Saudi Arabia's economy by supporting local industries and improve the localization volume by means of encouraging open new local factories, transfer of knowledge and technology, the enhance of research and development and create job opportunities for youth Saudis (Saudization).

The current informative booklet aims to open up investment opportunities in the manufacturing of materials, equipment and spare parts in the electricity industry of our belief in the size of the returns of large, financially and create job opportunities for young Saudi ambition to serve himself and his community and his country, and we are also establish the real localization in electricity and its support services.

4

Disclaimer

Thank you for taking the time to read the Investment opportunities in SEC booklet and we would like to inform you that the SEC, offers this booklet as a service for those interested in localization of Electrical industry. The information provided on this booklet has been obtained from sources believed to be reliable. The materials contained on this booklet are provided for general information and educational purposes only and do not constitute business, financial or other professional advice.

Contact us:

SEC is intended to hold meetings and workshops with manufacturers and businessmen and investors for more details about the opportunities and provide all the information, specifications and standards and the expected quantities based on economic feasibility. You can also inspect the investment opportunity samples in an exhibition of investment opportunities located in Riyadh – Deraiah warehouse.

For more information please contact:Local Content Development Project Team [email protected] Manager: E-mail [email protected] - Tel : (011) 8079724Team Leader: E-mail [email protected] - Tel : (012) 6537832

3

Introduction

Motivations to Invest in Electricity Industry

Local Content Development Strategic

Investment Opportunities for Transmission Spare Parts and Equipment

Investment Opportunities for Generation Spare Parts and Equipment

Investment Opportunities for Distribution Spare Parts and Equipment

4

5

8

9

25

37

Contents

2

Industrial Investments Opportunities OfLocal Content in Saudi Electricity Company

2016

Industrial Investment Opportunitiesin Saudi Electricity Company

industrial investment opportunities in sec

Documents