infokommunikációs rendszerek 9 . előadás adsl

32
Infokom. 9. 2013. nov. 11. 1 Infokommunikációs rendszerek 9. előadás ADSL Takács György

Upload: oksana

Post on 16-Jan-2016

20 views

Category:

Documents


0 download

DESCRIPTION

Infokommunikációs rendszerek 9 . előadás ADSL. Takács György. 2004. 2006. november. 2008. november. 2012. November. 2013. November. What is ADSL?. Asymmetric Digital Subscriber line , A modem technology , - PowerPoint PPT Presentation

TRANSCRIPT

  • Infokom. 9. 2013. nov. 11. *Infokommunikcis rendszerek9. eladsADSLTakcs Gyrgy

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *2004

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *2006. november

    maximlis letltsi sebessg (kbit/s)maximlis feltltsi sebessg (kbit/s)Havidj hsgnyilatkozattal (Ft)ADSL Optimum512964900ADSL Prmium10241287900ADSL Maximum20481929900

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *2008. november

    maximlis letltsi sebessg (kbit/s)maximlis feltltsi sebessg (kbit/s)Havidj hsgnyilatkozattal (Ft)DSL CLASSICHappy 2 Mbit/sec 192 kbit/sec 3 990 Ft DSL CLASSIC MEDIUM8 Mbit/sec480 kbit/sec 6 890 FtDSL CLASSIC EXTRA25 Mbit/sec4 Mbit/sec9 890 Ft

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *2012. November

    maximlis (garantlt) letltsi sebessg (Mbit/s)Maximlis (garantlt) feltltsi sebessg (Mbit/s)Havidj 2 v hsgnyilatkozattal (Ft)

    NetMniaS10 (1)0,5 (0,2)3990NetMniaM20 (10)1 (0,5)4690NetMniaL30 (20)1 (1)5490

    Infokom. 9. 2013. nov. 11.

  • 2013. NovemberInfokom. 9. 2013. nov. 11. *

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *What is ADSL?Asymmetric Digital Subscriber line,A modem technology,Convert existing twisted-pair telephone lines into access paths for multimedia and high speed data communication,Can transmit up to 6-25Mbps downstream,Can transmit up to 0,8-4 Mbps upstream,Transform the existing PSTN network to a powerful system capable of bringing multimedia, full motion video to the subscribers home.

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *ADSL system components

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *ADSL components at the subscriber

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *ADSL components at SOHO

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *ADSL components at Central Office

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *DSL access and IP/content provider network

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *What is the future of the ADSL?Will play a crucial role over the next ten years for telephone companies and other service providersNew broadband cabling will take decades to reach all prospective subscribers. EU regulation document on local loop unbundling because no competitive technology!

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *What can we learn from ADSL story?No ultimate technology!!Frequency division multiplexing, time division multiplexing, modulation, error control, flow control, scrambling, signal processing, adaptation, STM-ATM, trellis coding, in-service performance monitoring and surveillance, initialization, handshaking, channel analysis, are mixed in ADSLMore room for further development.

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *key requirements (1)Test loops makeup and topology (to ensure adequate penetration). Cross talk or steady state noise margin (to allow for interactions from otherDSL in a multi-pair cable). Data rates (both line and payload). Impulsive or transient noise margin (to allow for noise spikes e.g. ringing). Transmitter power spectral density limits (to ensure spectral compatibility and minimise unwanted RF emissions). Return loss (to ensure good line matching and signal power transfer). Line interface balance (to prevent EMC problems).

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *key requirements (2)

    Framing and data scrambling (to prevent cyclo-stationary effects e.g. line spectra). Latency (to minimise delay e.g. for voice traffic). Jitter and wander (to minimise data loss). Start up protocols (handshaking). Warm/cold start limits (time taken to synchronise and achieve reliable bit transport to minimise circuit unavailability). Line coding (to achieve efficiency in terms of bits/s/Hz) Duplexing (e.g. time, frequency, echo cancellation).

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *key requirements (3)

    Forward error correction (to self-correct physical layer transmission errors and not burden higher layer protocols with data re-transmission.) Embedded operations and maintenance (for the transfer of service related information e.g. QoS).

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *ADSL bitrate as a function of line length

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *Discrete MultiTone Copper lines have a frequency spectrum of 1.1Mhz which can be used to data communication under two main limitations: 1.The lower 4Khz are being used by the POTS. 2.The amplification isn't the same in all frequencies.

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *The technology being used is DMT which divides the frequency range to 256 sub-frequencies from 64Khz to 1.1Mhz Each sub-ferqency is an independent channel and has it own stream of signals . The ADSL protocol defines a basic stream of data which is known to both endpoints in advanced and enables them to find the specific SNR for each sub-frequency , and uses this information to split the data over the sub-frequencies

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *dividing the spectrum to 256 subfrequencies

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. * adaptive SNR discovery

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *Code & Error Correction One of the most important technology breakthrough that helped the ADSL is the coding . Using a method called consellation encoding and based on Reed Solomon coding decoding the information on the line can be damaged and yet the decoder rebuild the information in a very high reliability.To improve the performance of ADSL system some companies use 16 state 4 dimensional trellis code on top of the consellation encoding. Another useful method to increase the ADSL systems reliability is Forward Error Correction (FEC).

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *Framing & Scrambling As most of the Computer communication networks the ADSL uses a specific framing method . The main frame is called Superframe and it is composed of 68 ADSL data frames , the ATU-C sends a superframe every 17 msec . Each data frame gets his information from two data buffers (interleaved buffer and fast buffer)which are scrambled at a specific sequence , this scrambling method makes the error correction and coding more efficient.

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *ADSL 2/2+ bitrate as a function of line length

    Infokom. 9. 2013. nov. 11.

  • MAGYAR TELEKOM FELAJNLOTT DLSAM HELYSZNEK AZ ITK KZELBENInfokom. 9. 2013. nov. 11. *

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *

    Infokom. 9. 2013. nov. 11.

  • Infokom. 9. 2013. nov. 11. *

    Infokom. 9. 2013. nov. 11.