ingersoll rand · 2017-07-10 · ingersoll rand compressoren zijn niet ontworpen, of goedgekeurd...
TRANSCRIPT
Modulaire Adsorptiedrogers voor Persluchtsystemen
Ingersoll Rand
Betere Persluchtkwaliteit op eeneconomisch verantwoorde manier.
• Minimaliseerd verontreiniging, corrosie en energieverbruik• Kostenreductie omdat alleen de hoeveelheid perslucht wordt
behandeld die deze kwaliteit vraagt.• Levering van perslucht van een uitstekende kwaliteit met
lage geluidsniveaus.• Zorgt voor een hoog rendement en is makkelijk te onderhouden.
Inge
rsol
l R
and
D5IM - D34IMModulaire Adsorptiedrogers
D41IM - D299IMModulaire Adsorptiedrogers
Verbeteren persluchtkwaliteit en
reduceren van de operationele kosten.
De innovatieve modulaire adsorptiedrogers
van Ingersoll Rand maken het gemakkelijker
en beter betaalbaar dan ooit om perslucht
van een hoge kwaliteit te leveren voor
instrumentatie, procesapparatuur of aan
gebruikers waar dat wenselijk is:
• Zeer efficiënte filtratie en adsorptiedrogen
leveren schone, droge perslucht.
• Compacte, volledig geïntegreerde eenheden
installeren bij de gebruiker(s) waar
dit wenselijk is.
• Lage drukval verlaagt stroomkosten.
• Optioneel kan er voor de grotere units een
energiemanagementsysteem bestelt worden.
Productiviteit verbeteren
Onze adsorptiedrogers leveren standaard een
persluchtkwaliteit met een dauwpunt volgens
ISO Class 2, optioneel is een dauwpunt volgens
ISO Class 1 mogelijk dit om tegemoet te komen
aan de meest strenge eisen. Dit helpt bij het
voorkomen van corrosie en minimaliseert
verstoringen in de productie of verliezen door
vocht of vervuiling. Gemakkelijk onderhoud
ter plaatse – minder dan 15 minuten na 12000
bedrijfsuren – brengt u snel weer terug online.
UltraCare...helpt u een gezond
bedrijf te behouden
Tijdens de levensduur van een persluchtsysteem
kan (en zal) er veel gebeuren. Door een
steeds toenemende behoefte aan
machinebeschikbaarheid is het essentieel
om productieverlies als gevolg van niet gepland
onderhoud en stilstandtijd te reduceren.
Dat is waarom wij UltraCare aanbieden.
Een responsief, flexibel onderhoudscontract,
gebaseerd op het verrichten van gepland
onderhoud door Ingersoll Rand, wat een hogere
betrouwbaarheid van het systeem garandeert.
UltraCare voorkomt ongeplande stilstandtijd
en kostbare reparaties.
2 Modulaire Adsorptiedrogers
Vergroten betrouwbaarheid
in het presteren
Deze eenvoudige en gemakkelijk te
onderhouden modulaire drogers zijn niet
alleen efficiënt, maar ook een uitstekende
investering op de lange termijn:
• Geëxtrudeerde aluminiumconstructie en
epoxyverf voorkomt corrosie.
• Compacte, modulaire ontwerpen hebben
weinig bewegende delen.
• Bewezen, betrouwbare elektronische
besturing, met indicatie bedieningspaneel
voor preventief onderhoud, is een garantie
voor een lange levensduur.
Verbetering van het milieu en veiligheid.
Geluidsniveaus <75 dB(A) zijn zo laag dat
modulaire adsorptiedrogers van Ingersoll
Rand direct in de werkomgeving kunnen
worden geïnstalleerd. Deze eenheden
zonder koelmiddelen zijn tevens ontworpen
met de bijlagen NEMA 4/IP-66 en in
overeenstemming met de standaarden
van ASME, PED, CSA, UL en CRN.
Zeer efficiënteingebouwde filtratie voor een optimalepersluchtkwaliteit engemakkelijk te onderhouden.(Filters worden ‘losmeegeleverd’ vanaf modelD41IM t/m D 299IM)
Ingersoll Rand biedt producten en oplossingen waarmee bedrijven
over de hele wereld hun energieverbruik en -kosten kunnen
verminderen en schadelijke milieuemissies kunnen voorkomen.
Van luchtcompressoren met een lager energieverbruik tot elektrische
golfkarretjes met bijna geen emissie, Ingersoll Rand verschaft de kennis,
ervaring en oplossingen om onze klanten te helpen bij het bereiken
van hun milieudoelstellingen.
Capaciteit is gebaseerd op een intredetemperatuur van 35ºC en een druk van 7 bar g
3Modulaire Adsorptiedrogers
In/Uit AfmetingenModel Capaciteit Aansluiting Maximale druk mm Gewicht
cfm m3/uur BSP psig bar g Breedte Lengte Hoogte kg
D5IM 3 5 3/8" 175 12 149 289 422 11D14IM 8 14 3/8" 175 12 149 289 616 16D25IM 15 25 3/8" 175 12 149 289 906 23D34IM 20 34 3/8" 175 12 149 289 1098 28D41IM 24 41 1/2" 232 16 302 284 837 32D54IM 32 54 1/2" 232 16 302 284 1003 37D71IM 42 71 1/2" 232 16 302 284 1168 42D90IM 53 90 1/2" 232 16 302 284 1333 47D110IM 65 110 1/2" 232 16 302 284 1499 52D150IM 88 150 1" 189 13 566 220 1433 60D180IM 106 180 1" 189 13 566 220 1433 84D221IM 130 221 1" 189 13 566 220 1599 90D299IM 176 299 1" 189 13 566 220 1847 104
Technische specificaties (Standaard netspanning 230V / 1Ph / 50 Hz)
Ingersoll Rand compressoren zijn niet ontworpen, of goedgekeurd voor ademluchttoepassingen. Ingersoll Rand accepteert geen verantwoordelijkheid ofaansprakelijkheid voor compressoren gebruikt in ademluchttoepassingen.
Niets in deze brochure is bedoeld ter verlenging van de garantie of aanvulling op de uitvoering uitdrukkelijk of niet uitdrukkelijk, met betrekking tot het hierinbeschreven product. Deze garanties of voorschriften bij producten zijn in overeenkomst met de verkoopvoorwaarden van IR voor deze producten, die op verzoekverkrijgbaar zijn.
Ingersoll Rand voert een beleid van constante productontwikkeling. Ontwerpen en specificaties kunnen zonder voorafgaande kennisgeving en zonder voorbehoudgemodificeerd worden.
Gedrukt in het VK. Mei 08 © 2008 Ingersoll-Rand Company Limited CPN 23288848
Ingersoll Rand Industrial Technologies levert aan de markt producten, diensten en oplossingen die efficiënter met
de hiervoor benodigde energie omgaan waardoor productiviteit en processen sterk verbeteren . Het innovatieve
productprogramma strekt zich uit van complete persluchtsystemen , gereedschappen , pompen, logistieke
systemen betreffende vloeistoffen van divers materiaal en milieuvriendelijke microturbines. We verhogen ook de
productiviteit middels oplossingen gecreërd door Club Car , wereldmarktleider in golf- en utiliy voertuigen voor
zowel de zakelijke alsmede de particuliere markt.
air.ingersollrand.com
Member of Pneurop
Heatless and Heated Blower Desiccant Air Dryers160-14,900 m3/hr
Ingersoll Rand
2 Desiccant Dryers
Innovative Design is Now Within ReachIn
gers
oll
Ran
d
Low Profile for Easy Maintenance
One look tells you that Ingersoll Rand
desiccant dryers are like no others.
Our low profile design provides easy
access to key maintenance points at
operator level for faster servicing and
less downtime. The lower silhouette also
allows upright shipment and facilitates
simpler installation.
With manifolds angled toward the centre
at operator level, the high performance
valves are easily accessed for
maintenance. For example, a typical
diaphragm valve in a heatless dryer
can be rebuilt in less than ten minutes,
without removing the valve from
the manifold.
Low profile design Traditional designOur low profile design allows for upright
shipping and transportation.
Angled manifolds make valves
easy to access and maintain
Heavy duty filters
Ingersoll Rand heatless and heated blower desiccantdryers—are engineered for easy access, maximumefficiency and long life—are delivered in a state-of-the-art low profile package, makinginstallation and operation a snap!
Digital Microprocessor Controller
Innovative Controls and Design Lower Energy Costs
Our new dryers offer the state-of-the-art Energy Management
System (EMS) that maximises energy efficiency while
maintaining a constant dew point. By using a humidity sensor
to continuously monitor the dew point, EMS minimises the
compressed air used in regeneration, and optimises heater
and blower operation.
Heated blower models are equipped with solid state soft
starters that limit inrush current to ensure a smooth start
and longer blower motor life.
The dryers are engineered for low pressure drop through
valve selection, tower size and filter design.
On heated blower models, the heater and blower are
controlled by the outlet regeneration temperature that
shuts off to save electrical power once desiccant has been
thoroughly regenerated.
Solid state relays provide precise heater control, reduced
heating times and extended heater life.
State-of-the-art Microprocessor Controller
■ Maintains dryer performance at optimum levels, constantly
monitors functions and provides maintenance alerts and
protection notification, minimising downtime.
■ Matches the dryer control to the load/unload state of the
air compressor.
■ Modbus compatible.
■ LCD display for easy viewing.
Heavy Duty Filters For Longevity
■ Standard heavy duty pre-filters and after-filters extend
desiccant life and provide maximum particle protection of
the downstream air.
¤19,944
¤29,916
Energy Costs
¤40,320
These calculations are approximations based on the followingassumptions: Heatless model D3300IL, Heated model D3200IB, 55 m3/min, 1,800 CFM, 400 kW Compressor Motor, ¤0.07 per kW/hr80 hours per week, and 40 weeks per year.
A heated blower dryer with EMS can save
you over ¤20,000 in just 3 years!
Heated Blower Dryer with EMS
Heated Blower Dryer
Heatless Dryer
3Desiccant Dryers
4 Desiccant Dryers
Selecting the Right Desiccant Dryer
It’s all about choices. Whether it’s lower operating costs ora lower capital investment, Ingersoll Rand has a desiccantdryer that fits your needs.
Heated blower dryers have a higher initial investment, but with no or little diversionof compressed air from thesystem for regeneration, they offer significantly lower operating costs.
What Differentiates Ingersoll Rand Desiccant Dryers
Ingersoll Rand desiccant dryers are designed to virtually
eliminate costly production interruptions due to
moisture. All of our dryers use twin desiccant towers and
strategically positioned valves for drying compressed air.
Switching valves are normally open, while purge valves
are normally closed to allow air flow through the dryer in
case of power loss. Strategically-placed filters that
remove oil and contaminants ensure only clean, dried air
exits the dryer. Every dryer features an IP54 package,
providing increased protection of electrical components,
controls and displays. Both heatless and heated blower
dryers have several standard features to ensure high
quality operation as well as options to customise dryers
to fit the needs of your air system.
How Desiccant Dryers Work
Highly adsorbent desiccant removes moisture from
compressed air as it passes through the online dryer
tower. The difference between our two technologies
is how moisture is desorbed from the desiccant
(regeneration) – see diagrams on page 5.
Features and Options Heatless Desiccant Dryer Heated Blower Desiccant Dryer
Energy Management System (EMS) Option Standard
Compressed Air Used for Regeneration 15% 0%Controller Digital Microprocessor Digital Microprocessor Environmental Protection IP54 (Option for IP65) IP54 (Option for IP65)Available Flow Range (2.8 m3/min - 55.9 m3/min) (8.9 m3/min - 248.6 m3/min)Constant Pressure Dew Point -40°C (Option for -70°C) -40°C Included Filtration Heavy Duty Pre-filters & After-filters Heavy Duty Pre-filters & After-filtersPressure Rating 10 bar g 10 bar gTower Insulation Not Available OptionStainless Steel Control Lines Option OptionDryer Bypass Option OptionHeatless Back-up Mode Not Applicable Standard
Heatless dryers are lower incapital investment, but require a small portion of the driedcompressed air to be divertedfrom the air system for desiccant regeneration.
5Desiccant Dryers
Heatless Desiccant Dryers
Drying: (1) From the air compressor,
the air enters the dryer through a pre-filter that
removes contaminates to protect the desiccant.
(2) The air is directed through the drying tower.
(3) The desiccant removes moisture from the air
through adsorption. (4) Dry air passes through
an after-filter removing any contaminate particles
before entering into the air system. (5) A small
amount of the compressed air (15%) is redirected
to the regenerating tower.
Regeneration: (1) Dry air flows in the reverse
direction through the regenerating tower,
removing trapped moisture from the desiccant.
(2) Moist air exits the dryer through an exhaust
port equipped with a silencing muffler to
reduce noise.
To air system
From air compressor
To air system
Heater
Blower air intake
From air compressor
Heated Blower Desiccant Dryers
Drying: (1) From the air compressor,
the air enters the dryer through a pre-filter that
removes contaminates to protect the desiccant.
(2) The air is directed through the drying tower.
(3) The desiccant removes moisture from the air
through adsorption. (4) The dry air passes through
an after-filter removing any contaminate particles
before entering into the air system.
Regeneration: (1) Ambient air enters
through the blower intake. (2) Air temperature
is elevated as air moves across the external heater.
(3) The hot air is directed to the regenerating tower.
(4) Hot air flows in the reverse direction through
the regenerating tower, removing the adsorbed
moisture from the desiccant. (5) Moist air exits
the dryer through an exhaust port equipped
with a silencing muffler to reduce noise.
Drying towerRegeneration tower
Drying tower Regeneration tower
6 Desiccant Dryers
Desiccant Dryer Features and Benefits
Motor Protection/Soft Starter (heated blower only)Reduces inrush current and stress on the mechanical system.
Environmental ProtectionIP54 rating provides protection against dust and moisturecontamination (IP65 option for wash down applications).
Power SupplyDryers operate at 50 Hz (all models) or 60 Hz (optional).Pneumatic options also available on heatless models.
Centrifugal Blower (heated blower only)High performance centrifugal blower enables the use of ambient air for regeneration, eliminating compressed air loss.
High Performance Heater (heated blower only)Heats the air used for regeneration to increase the efficiency of moisture removal.
B
C
D
E
F
G
H
Humidity SensorThe sensor is part of the EMS package that allowscontinuous monitoring of the dew point.
A
Heavy Duty FiltersPre-filter: High efficiency removing oil aerosol content down to .01 mg/m3 @ 21°C protecting and extending the life of the desiccant.
After-filter: Heavy duty removing particles down to 1 microninsuring high air quality downstream to the customer.
I High Performance ValvesHigh performance butterfly valves with self-energised sealingprovide quick response and long life. The valves are centrallyangled for easy access.
J
Desiccant TowersThe towers are rated for continuous 10 bar g operation. The digital controller turns the towers off and on forregeneration regulation.
K
DesiccantReliable high strength non-acidic desiccant provides maximumperformance and is easily stored and handled.
Cool Sweep Mode (heated blower only)Reduces temperature and humidity spikes that mayoccur during switching.
Silencing MufflerReduce the exhausted air noise level to ensure a worker-friendly environment.
Microprocessor ControllerControls valve switching to correctly direct air flow andoperation of blowers and heaters. Protects the dryer viacontinuously monitoring operating parameters.
Safety Relief ValveProtects the dryer from over pressurisation incase of fire.
L
M
N
A
C
D
E
F
G
H
I
J
K
L
M
B
N
7Desiccant Dryers
Referenced to 20°C and 1 bar a, inlet 35°C and 7 bar g. Maximum working pressure is 10 bar g. Desiccant is factory-installed on all models except D5300IB to D14900IB. Dimensions and weights are approximate.
Heatless Desiccant Dryer Specifications
So, how do you select the right desiccant dryer technology?That depends on the variables, such as system demand,compressed air capacity, air quality requirements and applicablelife cycle costs that are unique to your compressed air system.
Flow Flow Dimensions Model -40°C PDP -70°C PDP In/Out Width Depth Height Weight
cfm m3/hr cfm m3/hr Connection mm mm mm kg
D160IL 94 160 75 128 1.0 BSP 1,029 762 1,600 241
D200IL 118 200 94 160 1.0 BSP 1,029 762 1,600 256
D275IL 162 275 130 220 1.5 BSP 1,130 813 1,676 321
D350IL 206 350 165 280 1.5 BSP 1,130 813 1,676 332
D500IL 294 500 236 400 2.0 BSP 1,232 813 1,702 419
D700IL 412 700 330 560 2.0 BSP 1,334 813 1,727 506
D900IL 530 900 424 720 2.0 BSP 1,435 864 2,083 710
D1000IL 589 1,000 471 800 2.0 BSP 1,435 864 2,083 755
D1600IL 942 1,600 754 1,280 3.0 BSP 1,626 1,067 2,235 1,016
D2000IL 1,178 2,000 942 1,600 3.0 BSP 1,626 1,067 2,235 1,100
D2500IL 1,472 2,500 1,178 2,000 DN100 1,994 1,397 2,057 1,350
D3300IL 1,943 3,300 1,554 2,640 DN125 2,134 1,549 2,388 1,773
Flow Dimensions Model -40°C PDP Heater Blower In/Out Width Depth Height Weight
cfm m3/hr kW kW Connection mm mm mm kg
D500IB 294 500 6 3.0 1.5 BSP 1,334 813 1,727 670
D900IB 530 900 12 4.0 2.0 BSP 1,435 864 2,023 958
D1400IB 824 1,400 18 6.0 3.0 BSP 1,626 1,194 2,184 1,451
D1800IB 1,060 1,800 24 9.0 3.0 BSP 1,994 1,219 2,032 1,710
D2200IB 1,295 2,220 24 9.0 3.0 BSP 1,994 1,219 2,032 1,857
D2600IB 1,531 2,600 30 15.0 3.0 BSP 2,134 1,397 2,337 2,504
D3200IB 1,884 3,200 36 15.0 DN125 2,134 1,524 2,337 2,775
D3900IB 2,296 3,900 45 15.0 DN125 2,134 1,524 2,337 3,138
D5300IB 3,120 5,300 60 18.5 DN150 2,438 1,676 2,489 4,417
D7000IB 4,121 7,000 80 22.0 DN150 2,591 1,930 2,286 5,524
D9300IB 5,475 9,300 100 30.0 DN150 3,505 2,210 2,464 6,072
D10600IB 6,241 10,600 125 37.0 DN150 3,810 2,337 2,616 7,264
D14900IB 8,772 14,900 175 45.0 DN200 4,267 2,489 2,667 9,035
Heated Blower Desiccant Dryer Specifications
Ingersoll Rand Ultra CareHelping you maintain a healthy business
Ultra Care five year maintenance and performance
agreements have been designed to be easy to understand
with absolutely no surprises.
Find out more about protecting the heart of your business
contact your local distributor or Ingersoll Rand Sales office.
Ingersoll Rand compressors are not designed, intended or approved for breathing air applications. Ingersoll Rand does not approve specialised equipment forbreathing air applications and assumes no responsibility or liability for compressors used for breathing air service.
Nothing contained on these pages is intended to extend any warranty or representation, expressed or implied, regarding the product described herein. Any suchwarranties or other terms and conditions of sale of product shall be in accordance with Ingersoll Rand's standard terms and conditions of sale for such products,which are available upon request.
Product improvement is a continuing goal at Ingersoll Rand. Designs and specifications are subject to change without notice or obligation.
Printed in the UK. October 2009
Ingersoll Rand Industrial Technologies provides products, services and solutions that enhance our customers'
energy efficiency, productivity and operations. Our diverse and innovative products range from complete
compressed air systems, tools and pumps to material and fluid handling systems and environmentally friendly
microturbines. We also enhance productivity through solutions created by Club Car®, the global leader in golf
and utility vehicles for businesses and individuals.
www.ingersollrandproducts.comIngersoll Rand Industrial Technologies
Swan Lane, Hindley Green
Wigan WN2 4EZ, UK
Tel: +44 (0) 1942 257171
Fax: +44 (0) 1942 254162
Email: [email protected] of Pneurop
© 2009 Ingersoll-Rand Company Limited