ip100 test report 021118 - ic plus test report_021118.pdf · ic plus corp....

IC PLUS CORP. 九暘電子股份有限公司

-1-

IP100 Test Report Date：2002-Nov-18

Summary

ItemNo.

Description Test

Result Page Note

Basic Function Test 3 1.1 Test Environment 1.2.1 EEPROM Function Test

1. EEPROM Read / Write PASS

3

1.2.2 LED Display Test 1. 10/100 Speed LED 2. Link / Activity LED 3. Full / Half LED

PASS

3

1.2.3 NWAY Auto-negotiation Test 1. 10 Half Duplex Link Check 2. 10 Full Duplex Link Check 3. 100 Half Duplex Link Check 4. 100 Full Duplex Link Check

PASS 4

1.2.4 Force Mode Test (Disable Auto-negotiation) 1. 10 Half Duplex Link Check 2. 10 Full Duplex Link Check 3. 100 Half Duplex Link Check 4. 100 Full Duplex Link Check

PASS 4

1.2.5 Register Read/ Write Test 1. PCI Register R/ W 2. NIC CSR Register R/ W 3. MII Register R/ W

PASS

4

1.2.6 Internal Loop Back Test PASS 5

1.

1.2.7 External Loop Back Test 1.2.7.1 UTP Loop Back 1.2.7.2 Fiber Loop Back

PASS PASS

5

2. Ping-Pong Function Test Chain mode run 12 hours

PASS

6

3. Novell Lantest PASS 7 4. Novell Endurance Test

Chain mode run 24 hours PASS

8

5. Novell CC Test Chain mode run 24 hours

PASS

9


-2-

ItemNo.

Description Test

Result Page Note

6. Novell Performance 3 Test PASS 10 7. Microsoft Hardware Compatibility Test

(Driver Test) 1. Win2000 HCT (100F) 2. Win-ME HCT (100F)

7.1 Environment Setup 7.2 Test Result 7.3 Plug and Play Test

PASS

11

Compatibility Test 8.1 Switch (PHY) Compatibility Test

1. D-Link des-1008D 2. Kendin switch 3. IP178A 4. Altima 5. IP175

PASS PASS PASS PASS PASS

13

8.

8.2 Smartbits 7410B Compatibility Test 1. Smartbits

PASS 15

9. Link Reliability Test 9.1 Plug & Unplug Test 9.2 Power On/ Off Test

PASS 16

10. IEEE 802.3 TX Pattern Test PASS 17 11. Wake ON LAN PASS 26 12. Boot Rom Test PASS 26 13. EMI Test PASS 26


-3-

1. Basic Function Test

1.1 Test Environment Software Test Program: BGO.EXE (Version: 12/17/2001, file size: 182,758) OS: DOS 6.22 or Pure Win98 DOS Hardware Equipment Model Speed PC * 1 ASUS P2B-F PII-BX 450 LAN Card * 2 Realtek 8139C, IP100 NIC 10/100 Mbps

1.2 Test Condition & Test Result 1.2.1 EEPROM Function Test Setup: EEPROM Read / Write Timing conformance Subject: Make sure EEPROM read/write function is ok.

Test Result: PASS

1.2.2 LED Display Test Setup: 10/100 Speed LED Link / Activity LED Full / Half duplex LED Subject: Make sure led indication is normal in different operation mode.

Test Result: PASS Condition Result Note 1 No link PASS 2 100M Full PASS 3 100M Half PASS 4 10M Full PASS 5 10M Half PASS


-4-

1.2.3 NWAY Auto-negotiation Test Setup: 10 Half Duplex Link Check 10 Full Duplex Link Check 100 Half Duplex Link Check 100 Full Duplex Link Check Subject: Force NIC in different operation mode and check link status.

Test Result: PASS Condition Result Note 1 100M Full PASS 2 100M Half PASS 3 10M Full PASS 4 10M Half PASS

1.2.4 Force Mode Test (Disable Auto-negotiation) Setup: 10 Half Duplex Link Check 10 Full Duplex Link Check 100 Half Duplex Link Check 100 Full Duplex Link Check Subject: Force NIC in different operation mode and check link status.

Test Result: PASS Condition Result Note 1 100M Full PASS IP100 LED will indicate 100Full, but

RLT8139C will be in 100 Half 2 100M half PASS 3 10M full PASS IP100 LED will indicate 10Full, but

RLT8139C will be in 10 Half 4 10M half PASS

1.2.5 Register R/W Test Setup: PCI Register Read / Write NIC CSR Register Read / Write MII Register R/ W Subject: Verify Read / Write PCI and CSR register.

Test Result: PASS Condition Result Note 1 PCI register Read/Write PASS 2 NIC CSR register Read / Write PASS 3 MII register Read / Write PASS


-5-

1.2.6 Internal Loop Back Test Setup: 1. Chain mode run for 4 hours Subject: Run internal loop back test in chain mode.

Test Result: PASS Condition Result Note 1 4 hours PASS No Packet Loss

1.2.7 External Loop Back Test 1.2.7.1 UTP External Loop back Test Setup: Use RJ45 connector to connect TX to RX. Chain mode run for 4 hours Subject: Run external loop back test in chain mode.

Test Result: PASS Condition Result Note 1 4 hours PASS No Packet Loss 1.2.7.2 Fiber External Loop Back Test Setup: Use a fiber to connect TX to RX. Chain mode ran overnight test Subject: Run external loop back test in chain mode.

Test Result: PASS Condition Result Note 1 Approximately 10 hours PASS


-6-

2. Ping-Pong Function Test

2.1 Test Environment Server/ Client No. LAN card Mother Board CPU RAM Cable

Length

Server IP100 ASUS - TUSL2-C Intel

Celeron 1GHz

128M 120m

Client 1 IP100 ASUS – TUSL2-C Intel

Celeron 1GHz

128M 120m

Test Program: BGO.EXE (Version: 12/17/2001, file size: 182,758) OS: DOS 6.22 or Pure Win98 DOS

Client Server

cross over UTP

2.2 Test Result PASS

Server/ Client

Speed/ Duplex Testing Time Result Note

Server 100M Full 12 hours PASS No Packet Loss Client 100M Full 12 hours PASS No Packet Loss

Server/ Client


Server 10M Half 4 hours PASS No Packet Loss Client 10M Half 4 hours PASS No Packet Loss


-7-

3. Novell Lantest

3.1 Test Environment Server/ Client No. NIC card Mother

Board CPU RAM Cable Length

Server1 IP100 X2

GigaBYTE GA-7ZX

AMD athlon 1.1 G 128M 3m

Server2 Realtek 8139D

X2 Asus TUSL2-C Celeron 1G 128M 3m

Client Realtek 8139D A-Open AX4B P4 1.6G 256M 3m

HUB: D-Link DE-808TP Driver version: 2.0.0 Filename: st201.lan

Test Configuration

Network BServer 2 Server 1 Client

OS: Netware 5X OS: Netware 6X OS: Windows 2000

Hub 10Mbps

Network A Network A Network A

Device under test

Novell LANTest

NIC 1 NIC 1

NIC 2NIC 2

Prot 1 Port 2 Port 3

NIC

3.2 Test Result

PASS

Server/ Client Result Note

Server1, Server2 PASS

Client PASS


-8-

4. Novell Endurance Test


Length Server IP100 Asus P4B P4 1.6G 128M 3m

Client 1 Intel Giga NIC 82543GC

Asus P4T/Wol/WOA P4 1.5G Rambus 128M

3m

2 Intel Giga NIC 82543GC MSI K7N420 AMD Atholon

1G 128M 3m

3 Intel Giga NIC 82543GC AOPEN AK77-PRO AMD

Atholon 1G 128M 3m

4 Intel Giga NIC 82543GC

ASUS TUV4X/533/WOA/ Celeron 1.3G 128M 3m


ASUS A7M266/550/WOL/

AMD Atholon 1G 128M 3m

6 Intel Giga NIC 82543GC Asus TUSL2-C Celeron 1G 128M 3m


Asus TUSL2-C Celeron 1G 128M 3m

Switch: D-Link DES-1008D Driver version: 2.0.0 Filename: st201.lan

Client 1

Client 2

Client 3

Client 4

Client 5

Server

Switch

4.2 Test Result

PASS

Server/Client No. Speed/ Duplex Testing Time Result Note Server 100M Full 24 hours PASS No Error Client 1 100M Full 24 hours PASS No Error

2 100M Full 24 hours PASS No Error 3 100M Full 24 hours PASS No Error 4 100M Full 24 hours PASS No Error 5 100M Full 24 hours PASS No Error 6 100M Full 24 hours PASS No Error 7 100M Full 24 hours PASS No Error


-9-

5. Novell Copy & Compare Test


Length Server IP100 Asus TUSL2-C Celeron 1G 128M 3m Client 1 IP100 A-Open AX4B P4 1.6G 256M 3m

Driver version: 2.0.0 Filename: st201.lan

Client Server

cross over UTP


Server/ Client


Server 100M Full 24hours PASS No Failure Client 100M Full 24hours PASS No Failure


-10-

6. Novell Performance 3 Test

6.1 Test Environment Server/ Client No. NIC card Mother Board CPU RAM Cable

Length Server IP100

Asus P4B P4 1.6G 128M 3m

Client 1 Intel Giga NIC 82543GC Asus P4T/Wol/WOA P4 1.5G Rambus

128M 3m

2 Intel Giga NIC 82543GC MSI K7N420 AMD

Atholon 1G 128M 3m

3 Intel Giga NIC 82543GC AOPEN AK77-PRO AMD

Atholon 1G 128M 3m


ASUS TUV4X/533/WOA/

Celeron 1.3G

128M 3m


ASUS A7M266/550/WOL/

AMD Atholon 1G 128M 3m

6 Intel Giga NIC 82543GC Asus TUSL2-C Celeron

1G 128M 3m

7 Intel Giga NIC 82543GC Asus TUSL2-C Celeron

1G 128M 3m

Switch: D-Link DES-1008D Driver version: 2.0.0 Filename: st201.lan

Client 1

Client 2

Client 3

Client 4

Client 5

Server

Switch


Server Speed/ Duplex

Maximum (K bytes)

Average (K bytes) Note

IP100 100M Full 11387.98 11344.78


-11-

7. Microsoft Hardware Compatible Test (HCT)

7.1 Test Environment Server/ Client NIC card Mother Board CPU RAM Cable

Length Support device 3 IP100 Server Ethernet card 2 Dlink530

MSI-MS 6398 Intel P4 1.6G 128M 2m

Test device 1 IP100 Support device 2 IP100 Client Ethernet card 1 Dlink530

ASUS-P4B266

Intel P4 1.6G 128M 3m

OS: Win2000/ Win-Me Driver version 2.5.4.0 LAN cards work at 100M full duplex. Switch: Accton 3008A Switch Domain 1 (test domain): test device 1, support device 2, and support device 3. Domain 2: Ethernet card 1 and Ethernet card 2


-12-

7.2 Test Result 7.2.1 Win2000 HCT-100M full duplex Test Condition: OS: Win2000 Driver version 2.5.4.0 LAN cards work at 100M full duplex. Test Result: PASS

No. Test item Result Note 1 NDIS Functional Testing PASS 2 NDIS Performance Testing PASS 3 NDIS Stress Testing PASS

7.2.2 Win-Me HCT-100M full duplex Test Condition: OS: Win2000 Driver version 2.5.4.0 LAN cards work at 100M full duplex. Test Result: PASS

No. Test item Result Note 1 NDIS Functional Testing PASS 2 NDIS Performance Testing PASS 3 NDIS Stress Testing PASS

7.3 Plug and Play Test

Test Condition: Test whether IP100 will automatically setup under all Microsoft Windows

Test Results No. OS Result Note 1 Windows 95 No Plug and Play 2 Windows 98 No Plug and Play 3 Windows Me No Plug and Play 4 Windows 2000 Plug and Play Driver is

Sundance 1.05 5 Windows XP Plug and Play Driver is

Sundance 1.05


-13-

8. Compatibility Test

8.1 Switch (PHY) Compatibility Test 8.1.1 Test Environment

Master / Slave No. NIC card Mother Board CPU RAM Cable

Length

Master 0 SX-7410B Smartbits 2000

Slave IP100 ASUS - TUSL2-C

Intel Celeron 1GHz 128M

1 Kendin Switch 130m~2m

2 Marvell Switch 130m~2m

3 IC+ 178A 130m~2m

4 D-Link Des1008D 130m~2m

Switch

5 IC+ 175 130m~2m

Software: 1. Client: BGO/ Rx Tx test, 2. Server: Smart window 7.00.26

Test Criteria: 1.Server: Smartbits send 1,000,000 packets (random data,

random length) to Switch. 2. Client: Receive packets from switch, make sure no packet loss

Master Slave

Switch


-14-

8.1.2 Test Result PASS

Switch Note Cable length

Kendin 5p Switch

Marvell 5p Switch

IC+ IP178A

D-Link Des1008D

IC+ IP 175

130m PASS PASS PASS PASS PASS 120m PASS PASS PASS PASS PASS 110m PASS PASS PASS PASS PASS 100m PASS PASS PASS PASS PASS 90m PASS PASS PASS PASS PASS 80m PASS PASS PASS PASS PASS 70m PASS PASS PASS PASS PASS 60m PASS PASS PASS PASS PASS 50m PASS PASS PASS PASS PASS 40m PASS PASS PASS PASS PASS 30m PASS PASS PASS PASS PASS 20m PASS PASS PASS PASS PASS 10m PASS PASS PASS PASS PASS 2m PASS PASS PASS PASS PASS


-15-

8.2 Smartbits 7410B Compatibility Test 8.2.1 Test Environment

Master / Slave No. NIC card Mother Board CPU RAM Cable

Length

Master 0 IP100 ASUS K7V AMD K7 - 800MHz 512M

Smartbits 7410B 130m~0m Software: BGO/ Ping Pong test Smartbits: set to be echo mode Test Criteria: Rx 10,000,000 packets, no packet loss

Master

Smartbits7410B

cross over UTP

8.2.2 Test Result PASS

Cable length

Smart bit 7410B Note

130m PASS No Packet Loss 120m PASS No Packet Loss 110m PASS No Packet Loss 100m PASS No Packet Loss 90m PASS No Packet Loss 80m PASS No Packet Loss 70m PASS No Packet Loss 60m PASS No Packet Loss 50m PASS No Packet Loss 40m PASS No Packet Loss 30m PASS No Packet Loss 20m PASS No Packet Loss 10m PASS No Packet Loss 2m PASS No Packet Loss


-16-

9. Link Reliability Test 9.1 Plug / Unplug test

9.1.1 Test Environment

IP100

D-LinkDES-1008D

switchRelay

UTP UTP

( Relay on/off automatically )

Test Time: over night Test Criteria: Link is ok if relay is on.

9.1.2 Test Result

PASS

9.2 Power On / Off Test 9.2.1 Test Environment

IP100

D-LinkDES-1008D

switchUTP

( power on /off )

Test Criteria: Link is ok after switch power on/ off 100 times

9.2.2 Test Result

PASS


-17-

10. IEEE 802.3 Transmit Pattern Test

10.1 100BASE-T Test Result

Measured Item Specification Measured Value Measured Result

(1) Transmit Eye Diagram With Waveform Limit With Waveform Limit PASS (2) Transmit Jitter < 1.4 ns 440 ps PASS (3) Differential Output

Voltage (+ Vout) 0.95V~1.05V + 960mv PASS

(4) Differential Output Voltage (- Vout) 0.95V~1.05V - 960mv PASS

(5) Rise and Fall Times [0]~[1] 3~5 ns 3.797ns~4.201ns PASS

(6) Rise and Fall Times [1]~[0] 3~5 ns 3.951ns~4.593ns PASS

10.2 10BASE-T Test Result

Measure Item Specification Measure Value Measure Result

(1) Idle Pulse Waveform Within Waveform limit With Waveform Limit PASS (2) Idle Pulse Waveform with

100m UTP3 cable Within Waveform limit With Waveform Limit PASS

(3) Link Pulse Waveform Within Waveform limit With Waveform Limit PASS (4) Link Pulse Waveform with

100m UTP3 cable Within Waveform limit With Waveform Limit PASS

(5) Transmit Waveform Jitter < + / - 8ns 3 ns PASS (6) Transmit Waveform Jitter

with100m UTP3 cable < + / - 8ns 5 ns PASS

(7) Transmit Waveform with 100m UTP3 cable Within Waveform limit Within Waveform limit PASS

(8) Peak Differential Output Voltage (50 ns data packet)

2.2~2.8 V 2.26 V PASS

(9) Peak Differential Output Voltage (100 ns data packet)

2.2~2.8 V 2.26 V PASS


-18-

10.3 Measured Waveform: 10.3.1 100Base-T:

(1) Transmit Eye Diagram:

(2) Transmit Jitter:


-19-

(3) Differential Output Voltage (+Vout):

(4) Differential Output Voltage (-Vout):


-20-

(5) Rise and Fall Times ([0]~[1]):

(6) Rise and Fall Times ([0]~[-1]):


-21-

10.3.2 10 Base-T: (1) Idle Pulse Waveform:

(2) Idle Pulse Waveform With 100m UTP3 Cable:


-22-

(3) Link Pulse Waveform:

(4) Link Pulse Waveform With 100m UTP3 Cable


-23-

(5) Transmit Waveform Jitter:

(6) Transmit Waveform Jitter With 100m UTP3 Cable:


-24-

(7) Transmit Waveform With 100m UTP3 Cable:

(8) Peak Differential Output Voltage (50ns)


-25-

(9) Peak Differential Output Voltage (100ns data packet)


-26-

11. Wake ON LAN 11.1

Item Result Magic Packet PASS

12. Boot Rom Test 12.1

Item Result Boot Rom Test PASS

13. EMI Test 13.1

Item Result EMI Class B Test PASS

ip100 test report 021118 - ic plus test report_021118.pdf · ic plus corp....

Documents