izolatii schneider (1)

8/10/2019 Izolatii Schneider (1)

http://slidepdf.com/reader/full/izolatii-schneider-1 1/28

INSULATIONwww.schneider-holz.com

Wood fiber insulation boards

Accessories

Application guide

PRICE LISTValid from January 2013



Photo forest: © shutterstock2



YOUR CONTACT PERSONS

Sales

Benjamin SchöllhornLogisticsPhone +49 (0)7355 9320-233Fax +49 (0)7355 9320-300E-Mail [email protected]

Mary KarnikSalesPhone +49 (0)7355 9320-240Fax +49 (0)7355 9320-300E-Mail [email protected]

Caroline RundelSalesPhone +49 (0)7355 9320-245

Fax +49 (0)7355 9320-300E-Mail [email protected]

Logistics

Bianca Reuter-FischerSalesPhone +49 (0)7355 9320-251Fax +49 (0)7355 9320-300E-Mail [email protected]

Michael StecherLogisticsPhone +49 (0)7355 9320-232

Fax +49 (0)7355 9320-300E-Mail [email protected]

3



best wood SCHNEIDER

We are a medium-sized company with customers all over Europe locatedin the south of Germany. Our branch office is located in Switzerland.With 300 employees, we produce all statically loaded wooden productsfor modern wood and passive houses.

Since the beginning of 2011 we produce flexible and rigid wood fiberinsolation boards on the most modern production line all over Europe.

KVH PRODUCTION LINE II

GLUE UNIT I

ADMINISTRATION

BIOMASS POWER PLANT

REFINER WOOD FIBER

PRODUCTION OFWOOD FIBER INSULATION

GLUE UNIT II

KVH PRODUCTION LINE I

SAWMILL

LOADING STATION

WOOD DRYING

4



GLULAMSKANDINAVIAN SPRUCELOCAL SPRUCELARCH

DUO-/TRIO-BEAMSSKANDINAVIAN SPRUCE

DUO-/TRIO-BEAMS WALLBOARDLOCAL SPRUCE

RIPPED GLUED BEAMSLOCAL SPRUCE

PRODUCTS FOR MODERN TIMBER CONSTRUCTION.

KVH® SOLID STRUCTURAL TIMBERWITH FINGER JOINTSWITHOUT FINGER JOINTS

KVH® SOLID STRUCTURAL TIMBER - DOUGLASWITH FINGER JOINTS

BS-CEILING BEAMS GLUEDSKANDINAVIAN SPRUCELOCAL SPRUCELARCH

BS-CEILING BEAMS GLUED - RIPPEDSKANDINAVIAN SPRUCELOCAL SPRUCELARCH

BS-CEILING BEAMS GLUED - ACOUSTICSKANDINAVIAN SPRUCELOCAL SPRUCELARCH

BS-CEILING BOARDSKANDINAVIAN SPRUCELOCAL SPRUCE

BEAMS FOR LOG HOUSES GLUEDSKANDINAVIAN SPRUCELOCAL SPRUCE

BEAMS FOR LOG HOUSES MASSIVELOCAL SPRUCE

DIRECTLY FROM THE MANUFACTURER!

5



MULTITHERM 110INSULATION BOARD –

UNIVERSAL APPLICATION

MULTITHERM 140INSULATION BOARD –


TOP / MULTITHERM 180 DINSULATION FOR THE FLOOR

FLOOR 140INSULATION FOR THE FLOOR FLOOR 140

INSULATION FOR THE FLOOR

LOAM RENDERING BOARDINTERIOR BASE BOARD

ROOM 150

RENDER BASEBOARDFOR INTERIOR APPLICATION

TOP / MULTITHERM 180 DFRONTAGE INSULATION

WALL 140RENDER BASEBOARD

wood fiber insulation board by best woodOVERVIEW

6



MULTITHERM 110INSULATION BOARD – UNIVERSALAPPLICATION

Page 8

MULTITHERM 140INSULATION BOARD – UNIVERSALAPPLICATION

Page 10

WALL 140

RENDER BASEBOARDPage 16

WALL 180RENDER BASEBOARDFOR TIMBER FRAMED CONSTRUCTIONS

Page 18

MULTITHERM 180 DINSULATION BOARD WITH HIGHERPROTECTION AGAINST FIRE Page 21

FLOOR 140INSULATION BOARD FOR THE FLOOR

Page 20

ROOM 150RENDER BASEBOARDFOR INTERIOR APPLICATION

Page 20

LOAM RENDERING BOARDINTERIOR BASE BOARD PRE-RENDEREDWITH LOAM

Page 21

FLEX 50FLEXIBLE INSULATION BOARD

Page 6

TOP 220 / 180 / 160 / 140WEATHERPROOF INSULATION

BOARD UNDER ROOF

FLOOR 140INSULATION FOR THE FLOOR



WALL 180RENDER BASEBOARDFOR TIMBER FRAMED

CONSTRUCTIONS

ROOM 150RENDER BASEBOARD

FOR INTERIOR APPLICATION

TOP 220 / TOP 180WEATHERPROOF INSULATION BOARD

UNDER ROOF

Page 12

TOP 160 / TOP 140WEATHERPROOF INSULATION BOARDUNDER ROOF

Page 14

O V E R V I E W

W O O D F I B E R I N S U L A T I O N B O A R D S

I N S U L A T

I O N B O A R D S

7




Cover size(m² Board)

stump 565 x 1200 mm(0.68 m²)

Thickness

in mm

Price per demand m² perpallet

Units perpallet

m² perpallet

Units perpallet

m² perpallet

Units perpallet

40 • 70.51 104 105.77 156 141.02 208

50 • 54.24 80 81.36 120 108.48 16060 • 48.82 72 73.22 108 97.63 144

80 • 37.97 56 56.85 84 75.94 112

100 • 27.12 40 40.68 60 54.24 80

120 • 27.12 40 40.68 60 54.24 80

140 • 21.70 32 32.54 48 43.39 64

160 • 20.34 30 30.51 45 40.68 60

180 • 16.27 24 24.41 36 32.54 48

200 • 16.27 24 24.41 36 32.54 48

220 • 13.56 20 20.34 30 27.12 40

240 • 13.56 20 20.34 30 27.12 40

Cover size stump500–800 mm width x 1200 mm

Thickness

in mm

Price per demand

80 •

100 •

120 •

140 •

160 •

180 •

200 •

220 •

240 •

Standard sizes

Special sizes width of 500 – 800 mm

Minimum purchase FLEX 50 „small pallet“

Available sizes and prices

Smallpallet

Mediumpallet

Largepallet

L 120 cm - W 120 cm - H 240 cm L 180 cm - W 120 cm - H 240 cm L 240 cm - W 120 cm - H 240 cm

The invoicing corresponds to the distance

between rafters.

Your ordered size corresponds to the distance between the

rafters and we add the required measure without invoicing.

Order-related production

8



Field of application

Field of application according to DIN 4108-10

Insulation between raftersInfilling insulation of walls and prefab constructions withwooden uprights

Insulation of wooden ceilings

Insulation of upper floor slab

Insulation of installation level

You may find an explicit explanation of the different fieldsof application on our technical data sheet.

Characteristics of wood fiber insulation board FLEX 50

ROOM 150

TOP

plasterboard

OSB

Solitex WA

DAD-dk, DZ, DI-zk, WH, WI-zk, WTR

OSB

MULTITHERM 180 D

F L E X 5 0

F L E X I B L E I N S U L A T I O

N B O A R D

I N S U L A T

I O N B O A R D S

Flex 50 is the ideal insulation for rafter areas of ceilings and timberframing. Due to its consistence Flex 50 is user friendly

Product description

Nominal value of thermal conductivity λD: 0.037 W/(m·K)

Density: 50 kg/m³

Denomination insulation board WF-EN13171-T2-TR1-AF5-MU1/2

German technical approval DiBt Z-23.15 1828

Density 50 kg/m³

Nominal value of thermal conductivity λD

0.037 W/(m·K)

Rated value of thermal conductivity λ 0.038 W/(m·K)

Reaction to fire according to DIN EN 13501 E

Building material class according to DIN 4102 B2

Complete declaration wood fibers, polyamide (binding fiber), ammonium phosphate (flame retardant)Production method dry process

Water vapour / diffusion resistance 1/2

Significant thermal capacity 2100 (J/kg K)

Waste code according to AVV 030105, 170201

FLEX 50Infilling insulation

of constructions withwooden uprights

FLEX 50Insulation of theinstallation level

FLEX 50

9



MULTITHERM 110INSULATION BOARD –UNIVERSAL APPLICATION

Cover size(m² per board)

tongue and groove 580 x 1250 mm(0.73 m²)

580 x 1500 mm(0.87 m²)

580 x 2000 mm(1.16 m²)

580 x 2500 mm(1.45 m²)

Thickness mm Price per demand m² per pallet m² per pallet m² per pallet m² per pallet Units/pallet

60 • 29.00 34.80 46.40 58.00 40

80 • 21.75 26.10 34.80 43.50 30

100 • 17.40 20.88 27.84 34.80 24

120 • 14.50 17.40 23.20 29.00 20

140 • 11.60 13.92 18.56 23.20 16

160 • 10.15 12.18 16.24 20.30 14

180 • 8.70 10.44 13.92 17.40 12

200 • 8.70 10.44 13.92 17.40 12

220 • 7.25 8.70 11.60 14.50 10240 • 7.25 8.70 11.60 14.50 10



shiplap edge 600 x 1250 mm(0.75 m²)

600 x 1500 mm(0.90 m²)

600 x 2000 mm(1.20 m²)

600 x 2500 mm(1.50 m²)


60 • 30.00 36.00 48.00 60.00 40

80 • 22.50 27.00 36.00 45.00 30

100 • 18.00 21.60 28.80 36.00 24

120 • 15.00 18.00 24.00 30.00 20

140 • 12.00 14.40 19.20 24.00 16

160 • 10.50 12.60 16.80 21.00 14

180 • 9.00 10.80 14.40 18.00 12

200 • 9.00 10.80 14.40 18.00 12

220 • 7.50 9.00 12.00 15.00 10

240 • 7.50 9.00 12.00 15.00 10


stump 600 x 1250 mm(0.75 m²)

600 x 1500 mm(0.90 m²)

600 x 2000 mm(1.20 m²)

600 x 2500 mm(1.50 m²)


40 • 43.50 52.50 69.90 87.00 58

60 • 30.00 36.00 48.00 60.00 40

80 • 22.50 27.00 36.00 45.00 30

100 • 18.00 21.60 28.80 36.00 24

120 • 15.00 18.00 24.00 30.00 20

140 • 12.00 14.40 19.20 24.00 16

160 • 10.50 12.60 16.80 21.00 14

180 • 9.00 10.80 14.40 18.00 12

200 • 9.00 10.80 14.40 18.00 12

220 • 7.50 9.00 12.00 15.00 10

240 • 7.50 9.00 12.00 15.00 10

Other sizes are available on request.


Boards on stock Cover size = size of invoicing!

No additional cost caused by the edgeprofile! A simple price! Please compare!

10



Product description

Multitherm 110 is a pressure-resistant wood fiber board with low weightand an excellent value for the thermal conductivity. Multitherm 110 may

be used in roofs as well as in walls. In combination with Multitherm 140it is an economical solution for thick insulation layers.

Field of application according to Din 4108-10

Foundation board of walls and roofSuitable for the installation level

You may find an explicit explanation of thedifferent fields of application on our technicaldata sheet

Characteristics of wood fiber insulation board Multitherm 110

DAD-dg, DZ, DI-zg, DEO-dg, WAB-dg, WH, WI-zg, WTR

Solitex UD

DA Connect

MULTITHERM 140


Density: 110 kg/m³

Denomination insulation board WF-EN13171-T4-CS(10\Y)40 TR5-WS1.0 AF100 MU3


Density 110 kg/m³


0.037 W/(m·K)




Complete declaration wood fibers, PMDI gluing, paraffin

Production method dry process

Compressive resistance vertical to the plane of the panel ≥ 50 kPa

Water vapour / diffusion resistance 3

Linear flow resistance > 100 kPa·s/m²

Short time water absorption ≤ 1.0 kg/m²



M U L T I T H E R M

1 1 0

U N I V E R S A L A P P L I C A

T I O N

I N S U L A T

I O N B O A R D S

MULTITHERM 110Economical solution in

combination with MULTITHERM 140

11



MULTITHERM 140INSULATION BOARD –UNIVERSAL APPLICATION



580 x 1500 mm(0.87 m²)

580 x 2000 mm(1.16 m²)

580 x 2500 mm(1.45 m²)


40 • 42.05 50.46 67.28 84.10 58

60 • 29.00 34.80 46.40 58.00 40

80 • 21.75 26.10 34.80 43.50 30

100 • 17.40 20.88 27.84 34.80 24

120 • 14.50 17.40 23.20 29.00 20

140 • 11.60 13.92 18.56 23.20 16

160 • 10.15 12.18 16.24 20.30 14

180 • 8.70 10.44 13.92 17.40 12

200 • 8.70 10.44 13.92 17.40 12

220 • 7.25 8.70 11.60 14.50 10

240 • 7.25 8.70 11.60 14.50 10



600 x 1500 mm(0.90 m²)

600 x 2000 mm(1.20 m²)

600 x 2500 mm(1.50 m²)


40 • 43.50 52.20 69.60 87.00 58

60 • 30.00 36.00 48.00 60.00 40

80 • 22.50 27.00 36.00 45.00 30

100 • 18.00 21.60 28.80 36.00 24

120 • 15.00 18.00 24.00 30.00 20

140 • 12.00 14.40 19.20 24.00 16

160 • 10.50 12.60 16.80 21.00 14

180 • 9.00 10.80 14.40 18.00 12

200 • 9.00 10.80 14.40 18.00 12

220 • 7.50 9.00 12.00 15.00 10

240 • 7.50 9.00 12.00 15.00 10



stump 600 x 1250 mm(0.75 m²)

600 x 1500 mm(0.90 m²)

600 x 2000 mm(1.20 m²)

600 x 2500 mm(1.50 m²)


20 • 90.00 108.00 144.00 180.00 120

40 • 43.50 52.20 69.60 87.00 58

60 • 30.00 36.00 48.00 60.00 40

80 • 22.50 27.00 36.00 45.00 30

100 • 18.00 21.60 28.80 36.00 24

120 • 15.00 18.00 24.00 30.00 20

140 • 12.00 14.40 19.20 24.00 16

160 • 10.50 12.60 16.80 21.00 14

180 • 9.00 10.80 14.40 18.00 12

200 • 9.00 10.80 14.40 18.00 12

220 • 7.50 9.00 12.00 15.00 10

240 • 7.50 9.00 12.00 15.00 10





12



Characteristics of wood fiber insulation board Multitherm 140

MULTITHERM 110

Solitex UD

DA Connect


Insulation under roof

Insulation for walls and ceilings

Behind frontages

Directly on rafters

You may find an explicit explanation of the different fieldsof application on our technical data sheet.

DAD-dm, DI-zg, DEO-dm, WAB-dm, WH, WI-zg, WTR

011-7D006

Multitherm 140 is a pressure-resistant, completely water-repellentinsulation for roof and frontages. Due to its high stability and

pressure-resistance it is suitable for applications under the floor screed.

Product description


Density: 140 kg/m³

Denomination insulation board WF-EN13171-T4-CS(10\Y)70-TR20-WS1.0-AF100-MU3


Density 140 kg/m³


0.040 W/(m·K)






Compressive resistance vertical to the plane of the plate ≥ 90 kPa

Tenacity vertical to the plane of the plate ≥ 20 kPa

Water vapour / diffusion resistance 3Linear flow resistance > 100 kPa·s/m²




MULTITHERM 140Pressure resistant insulation

board for the roof

M U L T I T H E R M

1 4 0


T I O N

I N S U L A T

I O N B O A R D S

13



TOPINSULATION BOARD –


With slip resistant latex coating

011-7D007



580 x 2500 mm(1.45 m²)

Thickness mm Price per demand m² per pallet m² per pallet Units/pallet

35 • 76.56 95.70 66

50 • 55.68 69.60 48

60 • 46.40 58.00 40

80 • 34.80 43.50 30

100 • 27.84 34.80 24

120 • 23.20 29.00 20

140 • 18.56 23.20 16

160 • 16.24 20.30 14

TOP 180 with higher density


0.042 W/(m·K) Rated value of thermal conductivity λ 0.044 W/(m·K)

Density 180 kg/m³ Compressive resistance vertical to the plane of the plate ≥ 200 kPa


TOP 220 with higher densityCover size

(m² per board)tongue and groove 580 x 2000 mm

(1.16 m²)580 x 2500 mm

(1.45 m²)


22 • 125.28 156.60 108

35 • 76.56 95.70 66

40 •

67.28 84.10 5850 • 55.68 69.60 48

60 • 46.40 58.00 40









14



Product description TOP 220 and TOP 180

Weatherproof insulation board, which may be used astemporary roof during the construction period (from apitch of 15°)

According to the statement of Holzforschung Austriasuitable as rainproof roof according to ÖN B 4119.

Water resistant insulation board for roof and walls

UDP-A according to ZVDH


ROOM 150

TOP 220 or 180Weatherproof insulation

Installation directly on rafters

FLEX 50

DAD-ds, DI-zg, DEO-ds, WAB-ds, WH, WI-zg, WZTOP is a high pressure- and weather resistant insulation board. TOP maytemporarily be used as weatherproof roof during the construction period,once the roof pitch is at least 15°. It is also excellent for the use asinsulation for a weathered frontage. Due to its surface coating with latexthe surface is slip resistant.

OSB

Characteristics of TOP 220 and TOP 180




Complete declaration wood fibers, PMDI gluing, paraffin, latex




Short time water absorption < 1.0 kg/m²



Technical data sheet: Download under www.schneider-holz.com

T O P 2 2 0

, T O P 1 8 0

I N S U L A T I O N B O A R D

I N S U L A T

I O N B O A R D S

15





(1.16 m²)580 x 2500 mm

(1.45 m²)


80 • 34.80 43.50 30

100 • 27.84 34.80 24

120 • 23.20 29.00 20

140 • 18.56 23.20 16160 • 16.24 20.30 14







(1.16 m²)580 x 2500 mm

(1.45 m²)


100 • 27.84 34.80 24

120 • 23.20 29.00 20

140 • 18.56 23.20 16

160 • 16.24 20.30 14

180 • 13.92 17.40 12

200 • 13.92 17.40 12

220 • 11.60 14.50 10

240 • 11.60 14.50 10





TOPINSULATION BOARD –


With slip resistant latex coating





16



Characteristics of TOP 160 und TOP 140

Product description TOP 160 and TOP 140 Field of application according to Din 4108-10

DAD-ds, DI-zg, DEO-ds, WAB-ds, WH, WI-zg, WZTOP is a high pressure- and weather resistant insulation board. TOP maytemporarily be used as weatherproof roof during the construction period,once the roof pitch is at least 15°. It is also excellent for the use asinsulation for a weathered frontage. Due to its surface coating with latexthe surface is slip resistant.

TOP 160 or 140Weatherproof insulation

To be posed directly on the rafter!

OSB




Complete declaration wood fibers, PMDI gluing, paraffin, latex








ROOM 150

FLEX 50

T O P 1 6 0

, T O P 1 4 0


T I O N

I N S U L A T

I O N B O A R D S

Weatherproof insulation board, which may be used astemporary roof during the construction period (from apitch of 15°)

According to the statement of Holzforschung Austriasuitable as rainproof roof according to ÖN B 4119.

Water resistant insulation board for roof and walls

UDP-A according to ZVDH

17



WALL 140RENDER BASEBOARD




580 x 1250 mm(0.73 m²)

580 x 1500 mm(0.87 m²)

580 x 2000 mm(1.16 m²)


60 • 18.56 29.00 34.80 46.40 40

80 • 13.92 21.75 26.10 34.80 30

100 • 11.14 17.40 20.88 27.84 24

120 • 9.28 14.50 17.40 23.20 20

140 • 7.42 11.60 13.92 18.56 16

160 • 6.50 10.15 12.18 16.24 14

180 • 5.57 8.70 10.44 13.92 12

200 • 5.57 8.70 10.44 13.92 12



600 x 1250 mm(0.75 m²)

600 x 1500 mm(0.90 m²)

600 x 2000 mm(1.20 m²)


60 • 19.20 30.00 36.00 48.00 40

80 • 14.40 22.50 27.00 36.00 30

100 • 11.52 18.00 21.60 28.80 24

120 • 9.60 15.00 18.00 24.00 20

140 • 7.68 12.00 14.40 19.20 16

160 • 6.72 10.50 12.60 16.80 14

180 • 5.76 9.00 10.80 14.40 12

200 • 5.76 9.00 10.80 14.40 12


stump 600 x 800 mm(0.48 m²)

600 x 1250 mm(0.75 m²)

600 x 1500 mm(0.90 m²)

600 x 2000 mm(1.20 m²)


60 • 19.20 30.00 36.00 48.00 40

80 • 14.40 22.50 27.00 36.00 30

100 • 11.52 18.00 21.60 28.80 24

120 • 9.60 15.00 18.00 24.00 20

140 • 7.68 12.00 14.40 19.20 16

160 • 6.72 10.50 12.60 16.80 14


Boards on stock


18




WALL 140 is a high pressure proof, plasterable wood fiber insulationboard. It is to be fixed on solid wood or brickwork of exterior walls.

Product description

Exterior walls made of solid wood and brickwork

Plasterable

Characteristics of WALL 140

WALL 140WALL 140

ROOM 150 ROOM 150


Density: 140 kg/m³

Denomination insulation board Z-33.43-1368, Z-33.4-1366


Density 140 kg/m³


0.040 W/(m·K)








Water vapour / diffusion resistance 3Linear flow resistance > 100 kPa·s/m²





N E W ! W D V S a p p r o v a l

W A L L 1 4 0

P L A S T E R A B L E I N T E R

I O R

I N S U L A T

I O N B O A R D S

Externalplaster

Interiorplaster

Interiorplaster

Externalplaster

19



WALL 180RENDER BASEBOARDFOR TIMBER FRAMED CONSTRUCTIONS

WALL 180 PLASTER REVEAL BOARD


Cover size

(m² per board)

tongue and groove 580 x 1250 mm

(0.73 m²)

580 x 1500 mm

(0.87 m²)

580 x 2000 mm

(1.16 m²)

580 x 2500 mm

(1.45 m²)


40 • 42.05 50.46 67.28 84.10 58

60 • 29.00 34.80 46.40 58.00 40

80 • 21.75 26.10 34.80 43.50 30

100 • 17.40 20.88 27.84 34.80 24

120 • 14.50 17.40 23.20 29.00 20

140 • 11.60 13.92 18.56 23.20 16

160 • 10.15 12.18 16.24 20.30 14


stump 600 x 1250 mm(0.75 m²)

600 x 1500 mm(0.90 m²)

600 x 2000 mm(1.20 m²)

600 x 2500 mm(1.50 m²)


20 • 90.00 108.00 144.00 180.00 12040 • 43.50 52.20 69.60 87.00 58


Boards on stock


20




WALL 180 is a high pressure-resistant, plasterable wood fiber insulationboard which is to be fixed on the post construction with wooden upright

of exterior walls.

Product description

Exterior walls made of solid wood and brickwork

Plasterable

Characteristics of WALL 180

WALL 180

FLEX 50

FLEX 50

OSB

011-7D008


Density: 180 kg/m³

Denomination insulation board Z-33.43-1368, Z-33.4-1366

German technical approval DiBt Z-23.15 1828Density 180 kg/m³


0.042 W/(m·K)










Short time water absorption ≤ 1.0 kg/m²Significant thermal capacity 2100 (J/kg K)


Technical data sheet: Download unter www.schneider-holz.com

N E W ! W D V S a p p r o v a l

W A L L 1 8 0

P L A S T E R A B L E I N S U L

A T I O N B O A R D

I N S U L A T

I O N B O A R D S

Externalplaster

Interiorplaster

21



FLOOR 140INSULATION BOARD FOR THE FLOOR

ROOM 150RENDER BASEBOARD FOR INTERIOR APPLICATION

FLOOR 140


Density: 140 kg/m³


Density: 150 kg/m³

Cover size

(m² per board)

tongue and groove tongue and groove 580 x 1500 mm

(0.87 m²)

580 x 2500 mm

(1.45 m²)

Thickness mm Price per demand Price per demand m² per pallet m² per pallet Units/pallet

40 • • 50.46 84.10 58

60 • • 34.80 58.00 40



Thickness mm Price per demand m² per pallet Units/pallet

40 • 42.05 58

60 • 29.00 40

80 • 21.75 30

100 • 17.40 24

Article code Description

6190FiFL2/60/35 Spruce joints strip 35 mm strong, 60 mm wide, 2 m long

Insulation board with tongue and groove joints, delivered with spruce joint strips for easy installation.

It is especially suitable for long and short plank flooring, which screws to the spruce joint strips.

Used without strips it is suitable as foundation for a floating dry screed construction.

Plasterable Interior wood fiber board ROOM 150.ROOM 150 may also be fixed on the post constructionwith wooden uprights.


Density 150 kg/m³


0.041 W/(m·K)






Characteristics of ROOM 150


Density 140 kg/m³


0.040 W/(m·K)








Characteristics of FLOOR 140

ROOM 150

WALL 140

Externalplaster

Interiorplaster

22



MULTITHERM 180 DINSULATION BOARD WITH HIGHER PROTECTION AGAINST FIRE

LOAM RENDERING BOARDINTERIOR BASEBOARD PRE-RENDERED WITH LOAM

With our new best wood insulation board MULTITHERM 180 Dwe create new rules of safety and fire behaviour. The fire behaviourof MULTITHERM 180 D is rated as D-s2, d0 according to EN 13 501-1

Fulfills the increased demand on protection against fire of the insulationmaterial according the ÖNORM B 3806 for ventilated facades.



Thickness mm Price per demand m² per pallet Units/pallet

20 • 139.20 120

40 • 67.28 58

60 • 46.40 40

80 • 34.80 30

100 • 27.84 24

120 • 23.20 20

140 • 18.56 16

160 • 16.24 14



Density 180 kg/m³


0.042 W/(m·K)


Reaction to fire according to DIN EN 13501 D




Characteristics of MULTITHERM 180 D

FLEX 50

MULTITHERM 180 D

ventilated frontage

OSB


Density: 180 kg/m³

625 x1250 mm

(0.78 m²)

stump

Thicknessof the board

in mm

Thicknessincluding the loamrendering in mm

Price per demand

22 35

60 73

Pre-rendered wood fiber insulation board already pre-coated with loamon both sides.10 mm loam rendering with reinforcement on the front,

3 mm loam rendering with reinforcement on the back.

Advantages

• Loam rendering controls

the atmospheric moisture• Loam rendering absorbs

contamination as well

as odorants• Loam rendering gives you

always the feeling of fresh air• Loam rendering is highly

appreciated by allergic persons

Installation

1. Bolt or clamp the board2. Staple the joint reinforcement3. Level the joints out4. Level the surface after the drying process5. Apply the undercoating6. Apply the loam surface finishing

F L O O R 1 4 0 / R O O M

1 5 0

M U L T I T H E R M

1 8 0

D

I N S U L A T

I O N B O A R D S

23



• Store and install in dry condition

• Create the bottom angle by cutting of the tongue and using a base

connector strip• Consider expansion joint, once the base strip is joined

• Wall 140/180 may not be used on the ground

• Without additional actions, a splash water zone of at least ⋝ 30 cm

above the upper edge of the ground, has to be created• Ensure the impermeability of joints

• Smallest size of the boards for the frontage = 40 mm

• Smallest size of the boards for the reveal = 20 mm

• Joints to bordering buildings have to be driving rain proof and

windproof• Make sure that uneven areas are planned or smoothed before the

beginning of the rendering• Make sure to place the boards with an offset of 25 cm (no cross joints)

• Wide back braces have to be steeped 1 mm into the board, while the

screw disc of the insulation screw has to be flushed to the surface ofthe board

GENERAL APPLICATION RULES

Installation guide for the timber frame construction

• Joints between the boards of 2 mm are tolerable; joints between the

boards of 2 – 5 mm have to be closed with adequate materials suchas Schneider joint sealant. Joints of more than 5 mm have to be closedwith stripes of WALL 140/180

• Create a exible or expansion joint once there is a vertical or horizontal

change of the underground

• A second tight level should be created under the window bench• During the installation of the end tting of the window benches use

joint less belt for all joint to WALL 140/180. The end fittings of thewindow benches have to absorb the moves of the plaster façadeand the window bench. The use of fittings with sleeve bearings isrecommended.

• Begin to apply the render system at least 4 weeks after the installation

of the WALL 140/180, if not, protect the façade with a ventilated cover• Please check the moisture content and the surface stability before the

beginning of the application of the render. Max. humidity 13 %( = 19.5 % on adjustment spruce/r)

• Protect installed boards from direct humidity

• By using injected insulation make sure to insert it before the beginning

of the render application.

Right

25 cm

No joint on mouth cornersPlace with an offset of 25 cm

Wrong

• The WALL 180 is xed directly on the rafters

• Fixation with stainless steel wide back braces such as Haubold or equivalent

• Minimal length of the xation material = size of the board + minimum penetration depth

• Minimum penetration depth of the wide back brace ⋝ 30 mm• Minimum penetration depth of the insulation screw for wooden undergrounds ⋝ 30 mm• The installation overhead is exclusively possible with WALL 180 with a size of at least 60 mm (height of board) and insulation screws for wooden

undergrounds. In any case do not exceed the dimension between axes of 40 cm by construction of the important supporting substructure.

Fixation of the boards with wide back braces or insulation screws

24



Minimum quantity of fixing devices Maximum dimension between axes for WALL 180 (tongue and groove)

Minimum length of fixing devices

Thickness

of the

insulation

Wide back braces

(Haubold or equivalent)minimum length in mm

Insulation screw

(Fischer Thermofix 6H or equivalent )minimum length in mm

Insulation screw

(Ejotherm STR H or equivalent)minimum length in mm

20 75 -- --

40 75 80 80

60 90 100 10080 110 120 120

100 130 140 140

120 150 160 160

140 180 190 180

160 -- 190 200

180 -- 210 220

200 -- 230 240

Blast pressure according to

DIN 1055-4 [kN/m2

]- 1.00 - 1.60

Insulation screw (B) 6 pcs/m2 10 pcs/m2

Wide back braces (A) 16 pcs/m2 16 pcs/m2

Thickness of the board maximum dimension between axes

40 mm 62.5 cm60 mm 83.3 cm

80 / 100 / 120 / 140 / 160 mm 91.5 cm

5 8 0 m m

Example for laying WALL 180

Size of the board 580 x 12500 mm, dimension between axes of the studs 62.5 cm

62.5 cm

1250 mm

6 pcs/m2

25 cm

25 cm

10 pcs/m2 16 pcs/m2

16 cm10 cm

10 cm

10 cm

10 cm

10 cm

16 cm

16 cm

5 8 0 m m

Example for the WALL 180Size of the board 580 x 1500 mm, dimension between axes of the studs 83.3 cm

1500 mm

83.3 cm

10 pcs/m2

12 cm

12 cm

12 cm

12 cm

6 pcs/m2

17 cm

17 cm

17 cm

16 pcs/m2

7 cm

7 cm

7 cm

7 cm

7 cm7 cm

7 cm

U S E R ` S G

U I D E

25



Installation guide for supporting solid wood undergroundsFixation of the boards with wide back braces or insulation screws

• WALL 140 or WALL 180 may be used for the installation on holohedral wooden undergrounds

• Fixation with stainless steel wide back braces such as Haubold or with insulation screws

• Minimum penetration depth of the wide back brace ≥ 30 mm• Minimum penetration depth of the insulation screw for wooden undergrounds ≥ 30 mm• Please consider breaking joint of minimum 30 cm on the installation of two layers

Installation in single layer Installation double layer

Combination possibilities for the installation of two layers on holohedral wooden undergrounds

Thickness

of the

insulation

single

layer

double layer

maximal thickness1st layer

double layer

minimal thickness2nd layer

wide back braces

(Haubold or equivalent)minimal length in mm

insulation screw

(Fischer Thermofix 6Hor equivalent)

minimal length in mm

insulation screw

(Ejotherm STR H,or equivalent)

minimal length in mm

20 20 -- -- 75 -- --

40 40 -- -- 75 80 80

60 60 -- -- 90 100 100

80 80 -- -- 110 120 120

100 100 -- -- 130 140 140120 120 60 stump 60 stump 150 160 160

140 140 80 stump 60 stump 180 190 180

160 160 100 stump 60 stump -- 190 200

180 180 120 stump 60 stump -- 210 220

200 200 140 shiplap edge 60 stump -- 230 240

220 -- 160 shiplap edge 60 stump -- 250 260

240 -- 160 shiplap edge 80 T+G / stump -- 310 280

260 -- 180 shiplap edge 80 T+G / stump -- 310 300

280 -- 200 shiplap edge 80 T+G / stump -- 310 --

Distance between fixing devices

Wide back braces A ≤ 170 mm, B ≤ 370 mm

Minimum quantity of fixing devices


DIN 1055-4 [kN/m2] - 1.00 - 1.60

Insulation screw (B) 6 pcs/m2 10 pcs/m2

Wide back braces (A) 16 pcs/m2 16 pcs/m2

26



Installation guide for minerally undergrounds

Base detail

Fixation of the boards with insulation dowels

• Fixation of the base rail with a distance of e ≤ 30 cm• On the joint of the base rail install base connector strips

• Cut off the tongue on the rst line of the boards and put the

boards holohedral on the base rail• Ensure a joint less installation of the further boards

• Without additional actions a splash water zone of at least

≤ 30 cm above the upper edge of the ground has to be created

• The given quantity of xing devices has to be strictly kept

• Only xations on bearing surfaces are statically effective

• Anchoring depth in cement ≥ 25 mm, in aerated concreteor masonry ≥ 65 mm

Recommended dowel picture for installation screws or dowels (for example using boards of 600 x 1250 mm) on the installation on

holohedral wooden or mineral undergrounds.

Minimum quantity of fixing devices


DIN 1055-4 [kN/m2]

- 1.00 - 1.60

Insulation dowels 6 pcs/m2 10 pcs/m2

6 pcs/m2 10 pcs/m2

U S E R ` S G

U I D E

27



Holzwerk Gebr. Schneider GmbHKappel 2888436 EberhardzellDEUTSCHLAND

Phone +49 (0)7355 9320-0Fax +49 (0)7355 9320-300E-Mail [email protected]

Holzwerk Schneider u. CoBucherstrasse 10

9556 AffeltrangenSCHWEIZPhone +41 (0)71 918 79 79Fax +41 (0)71 918 79 78E-Mail [email protected]

HEADQUARTER GERMANY

GERMANY

SUBSIDIARY SWITZERLAND

SWITZERLAND

www.schneider-holz.com

Holzwerk Gebr. Schneider GmbHGERMANY

Holzwerk Schneider u. CoSWITZERLAND

izolatii schneider (1)

Documents