jayaraj _cv

CURRICULUM VITAE

ARPUTHASAMY JAYARAJBlk - 484B, Choa Chu Kang Ave-5, #03-46, Singapore - 682484.

Telephone Number : (65) 9105 2949. (Singapore)Email Address : [email protected] : IndianResidential Status : Permanent Residence in Singapore (PR)Location : SingaporeNRIC No : S7585547HDate of Birth : 28-07-1975Passport Number : Z3805248Marital status : Married Academic Qualification: Diploma in Mechanical Engineering (DME) State Board of Technical Education, Tamil Nadu, India. June 1992 -April 1995. National Technical Certificate (NTC-2). Mechanical Servicing. Institute of Technical Education – Singapore. 1998 to 2000.

Professional Qualification: CSWIP 3.2.2 Senior Welding Inspector (Cert. no: 42143) (Includes Radiographic Film Interpretation (RI) for ferritic steels). The Welding Institute. (TWI), UK.

API 570 Piping Inspector (Cert. no: 39241) American Petroliam Institute ASNT NDT Level – II in RT, UT, MPI & LPT

MS Office (Word, Excel, Power Point) APTECH Computer Education, India.

Additional Qualification: Driving License: CLASS- 3/2B (Singapore)

Shipyard Supervisors Safety Course (SSSC) Ministry of Manpower, Singapore.

Summary of Experience:

Resume of Jayaraj of 8

I am having more than 20 years of experience as a Piping Production supervisor Quality Assurance/Quality Control Engineer / Inspector and involved in various kind of inspection activities in Structural, Piping, Pipelines, Welding, NDT and Mechanical works in the field of Petrochemical industry, Refinery, Oil & Gas Plants, Shipyards and fabrication workshops. Reviewed and approve all technical proposal, All project procedure, Drawing, Qualification of Personnel, Supervise and overlook contractor works onshore and offshore to ensure contractual requirement are met, Familiar with international onshore/offshore HSE safety procedure and requirement. Dimensional inspection and welding works, Cross Checker Ultrasonic test And Radiographic Film interpretation, piping, and Structural fabrication and Installation, Daily check construction production, Control Project materials receiving. Piping line walking for punch listing, Hydro testing, Re-instatements, MC walk down & review QA/QC document, specification, piping packages for line releasing. Review and approve all inspection report and also more knowledge of Maintenance & Servicing Organization:

Employer : ENI Ghana

Keppel Shipyard, Singapore.

Period : From 21st Sep 2016 to Till Date

Position : Piping Inspector/Supervisor (Piping/welding)

Project Handled : FPSO-OCTP Development Project.

Employer : DSME( Daewoo Shipbuilding & Marine Engineering Co.Ltd)

45, Dyna-Mac Yard, Singapore.

Period : From 22th April 2016 to 20th Sep 2016

Position : Piping Supervisor (Piping/welding)

Project Handled : Upper Zakum 750 (ZADCO)

EPC2- Islands Surface Facilities Project.

Employer : Bumi Armada

Keppel Shipyard, Singapore.

Period : From 20th Jan 2016 to 10th April 2016


Project Handled : Armada Ali FPSO ENI Angola.

Employer : TRANSOCEAN

Keppel Fels, No.50 Gul Road, Singapore.

Period : From April 2014 to 10th Jan 2016

Position : QA/QC Inspector (Structural/Piping/welding)


Project Handled : (Jack-up Rig Project No: B364~B368 – 05 New Builds)

Employer : GRUPO - R


Period : From Jan 2014 to April 2014

Position : Piping Inspector

Project Handled : (Jack-up Rig Project No: B354~B357 & B360 – 05 New Builds)

Employer : MODEC Jurong Shipyard (JSL) (Tuas Mega Yard), Singapore. Period : From 4th Oct 2013 to 30th Oct


Project Handled : PYRENEES VENTURE Dry Docks (FPSO) Project.



Period : From Jan 2012 to 30th Sep 2013

Position : QA/QC Inspector (Piping/Structural/Welding)

Project Handled : Siam Driller (B326), Andaman (B327), AO Thai (B335) - (Jack-up

Rig – New Builds).


PPL Shipyard Pte Ltd, 21, Pandan Road, Singapore.

Period : From Dec 2010 to Jan 2012

Position : Structural/Piping Inspector

Project Handled : Transocean Honor (Jack-up Rig – New Built Projects).


Sembawang Shipyard Pte Ltd. (Subsidiary of SembCorp Marine Ltd.)

No. 60, Admiralty Road West, Singapore 759956

Period : From July 2010 to Oct 2010


Project Handled : DEEPWATER EXPEDITION- DRILL SHIP & Upgrading.


Employer : TRANSOCEAN Keppel Fels, No.50 Gul Road, Singapore.

Period : From Feb 2010 to July 2010

Position : QA/QC Inspector (Structural / Piping)

Project Handled : MG HULME JR- R327-Semisubmersible & Upgrading.



Period : From May 2008 to 0ctober 2008


Project Handled : Transocean SEDCO-706-Semisubmersible & Upgrading.

Employer : SHAW STONE & WEBSTER ASIA INC. Jurong Island, Singapore. Period : From Nov 2010 to Dec 2010

Position : QA/QC Welding Inspector (Piping)

Project Handled : EXXON MOBIL -Singapore Parallel Train Project (SPT Project). Employer : CB I-LUMMUS -TOYO JV Shell ECC Singapore Project. Pula Ular Island, Singapore. Period : From October 2008 to Feb 2010

Position : QC Welding Inspector (Piping)

Project Handled : SHELL HOUDINI ECC (Ethylene Cracker Complex) for SEPL (Shell Eastern Petroleum Ltd) at Pulau Ular Island, Singapore

Employer : PPL Shipyard PTE LTD,

21, Pandan Road, Singapore.

Period : From Sep 2006 to May 2008.

Position : Sr.Welding Inspector (Structural) Project Handled : Jack up Rigs - P2010 - Japan Drilling Corp., P2012, P2019-

Awilco, Asia, P2008 & P2015- Deep Drilling Invest. P2017, P2018,

P2020- Blue Sky offshore, P2022- Egyptian Drilling Company

Classification : ABS (American Bearu Shipping)

Employer : Lixin Egg Pte Ltd, (KEPPEL FELS Sub contractor)

No.1, Kian Teck Crescent, Singapore.

Period : From 2001 to 2006.


Position : Welding Inspector (Structural/Outfitting)

Duties and Responsibility:

PIPING / PIPING REFINARY/ NDT:

Read & Review Project specification, Project Quality test plan, procedure, inspection check lists, Piping Isometric drawings, P&ID and Construction plan drawings.

Pre fabrication Piping spools welding inspection & Follow up production activities, HSE walk around.

Inspection of all fit up in before, during & after welding. Review Welder Qualification Test (WQT) and Welding Procedure Specification (WPS). Responsible for the Inspection of all welding activities in the Projects covering Power

Piping, Pressure Piping, in accordance with Quality plan, Codes and Standard. Review Preheat, PWHT and Procedures for welding the Alloy steel materials such as

ASTM A519 Gr.4130, SA 335, P91, P22 & P11. Carrying out Welders Qualification Test to Qualify welders for Similar and Dissimilar

materials of Pipes and Plates as per ASME Sec -V, IX, Applicable Codes ASME Sec-I, VIII, B31.1 & B31.3.

Familiar with codes ASME- SEC V, IX, 31.3, 16.5, AWS D1.1, API 1104, BSEN 462, 499, API 570, API 6A & ABS & DNV Standards.

Inspection done in the installation of different types of Tie in joints, valves, gaskets flanges, piping insulations & S.S. cladding.

FPSO Modules, main deck integration piping lines follow productions and line walk, hydro test & re-instatement inspections and MC walk down & closed the punch items.

Carry out regular internal quality audits on fabrication, welding consumables, drawing and documentation control.

Conducting Visual Inspection on the welded Joints and Maintaining the Traceability on the job and updating the weld map of relevant Isometric drawing.

Witnessing the PMI on Weld metal, Parent metal, to ensure the Traceability of the

materials Monitoring and Witnessing PWHT and reviewing the charts.

Witness PT, MPI, UT, RT, PWHT, PMI & Hardness testing. Reviewing Test Packages before test, Including Index, Isometric, P&ID, and Weld

summary Report, NDT report, Material Traceability Record and preparing Pretest & Post

Test Punch list.

Duplex, Super duplex stainless steel fabrication & erection fit up, visual inspection and

documents review for turret & Process modules.

Witnessing and verify Flange identification, bolt torqueing (hydraulic & manual) for

compact flanges.


To check and identifying Flange material, Flange facing defect, maximum and minimum

gasket seating stress, allowable bolt stress gasket for compact flange & Hub connections.

Suggested bolting-up sequence and number of tools to be used for Hydraulic bolt

tensioning.

Studs & Nuts before used to flange to check free of dirt, corrosion and damaged.

To check Flange Qualified personnel, torque calibration certificate& check suitable gasket

as per piping ISO drawing.

Witness and verify all tests (such as Hydro test, Flood test, Vacuum test on Pipes). Materials handled so far carbon steel, low alloy steel, stainless steel, duplex & super duplex

stainless steel, Cu-Ni, Incoly,GRE/GRP piping, tubing’s & fittings etc.

High Pressure & Low pressure all piping systems inspections carried out Line check, hydro test, Pneumatic test & Re-instatement before hand over to commissioning according to the test projects schedule.

Prior to acceptance of a system, a final walk will be conducted. Any punch list items will be noted and entered into the contractor’s data base. Punch list items will be classed as A or B. All “A” items will be cleared prior to acceptance of the system.

Complete the discipline scope safely and monitor field construction activities to ensure design requirements are met in compliance with drawings, specifications and applicable codes. Ensuring adequate inspections are carried out by contractor’s QC Department.

Support Commissioning teams. Witness on chemical cleaning & Oil flushing, pickling and passivation of Stainless steel

pipes. Witness FAT test of HP Choke & kill manifold, Mud manifold, BOP diverter control unit

& review the documents. Review of RT film interpretation and review all NDT Reports & test procedures. Raise the NCR & Punch list against the project specifications and follow up action to close

out. To inspect piping the mechanical completion inspection and found against the ISO & P&ID

raise the punch list. Final documentation review & signing for the inspection reports & NDT reports.

STRUCTURAL / OUTFITTING / NDT:

Review mill certificates and test certificates during material receiving to ensure compliance to specifications.

Read & Review Hull drawings (Primary, Secondary & out Fittings) for Approved for construction.

Familiar with project Specifications, Procedures & Inspection test plan (ITP). Controlling & Inspections of all hull/outfitting fabrication & erection activities like materials,

fit-up, welding process, preheating, visual, NDT & PWHT. Ensure that work is done with acceptable quality by monitoring daily inspecting work done

according to specification, procedure and applicable standards.


Involved in the daily inspection activities based on the Inspection request from the yard for Structural and Outfitting jobs.

Quality Control / Quality Assurance of all fabrication and construction works for project undertaken by the company.

Carry out regular internal quality audits on fabrication, construction, welding consumables, drawing and documentation control.

Witness PT, MPI, UT, RT, PWHT, PMI & Hardness testing. Review of RT film interpretation and review all NDT Reports & test procedures. Ensure that all welding procedures for the projects are identified to meet project

requirements. Witness and verify all tests (such as Hydro test, Flood test, Vacuum test on Tanks & Chalk

test, Hose test on W.T Doors & windows) applicable to discipline, and prepare reports after such tests are conducted.

Monitoring welding activities during fabrications & erections and ensure qualified welder on board and following WPS.

Review & witness Welder Qualification Test (WQT) and Welding Procedure Specification (WPS).

Raise NCR, Punch list and Surveillance reports whenever necessary and ensure corrective actions are taken timely to close all NCRs & punch lists including those issued by the clients.

Inspections carried out on the Pre fabrications & erections of HULL, PANTOON, COLUMNS, JACK CASE, UPPER & LOWER GUIDE, TRIANGULAR LEGS, SPUD CAN, CANTILEVER, DRILL FLOOR, HELIDECK, LIVING QUARTERS (ACCOMMADATIONS), CRANE COLUMN, HAVC DUCTING & OUTFITTINS JOBS.

Familiar with codes ASME- SEC V, IX, 31.3, 16.5, AWS D1.1, API 1104, BSEN 462, 499 & ABS & DNV Standards.

Inspection on All Outfitting Items such as Foundations, Platform & handrails. Carry out inspection of insulation such as Thermal, A60, Acoustic and A15 in All

compartments & Living Quarters. Inspections of All HAVC Air-con ducting, ventilation ducting & dampers at Living

Quarters & Compartments. Final inspections were carried out for Tank close out, Compartment close out &

Accommodation’s (LQ) close out. Final documentation review & signing for the inspection reports & NDT reports.

MECHANICAL:

Perform Fit up, visual, dimensional check and installation & tie down of oil field Equipment’s such as BOP Diverter, Cementing units, Lifting crane, Air Compressor, Oily water separator, Water maker’s, Main engine & Emergency Generators, Mud pumps, derrick access basket & all marine related equipment’s etc…

Support & involved the mechanical completion inspections.

Involved and follow up factory acceptance test (FAT) and commissioning of above mentioned Subsea Equipment’s according to Third party equipment’s installation & commissioning procedure.

Inspections of All HAVC Air-con ducting, Water Tight Door’s, ventilation ducting & dampers at Living Quarters & Compartments including insulation inspections.


13) Employer : INTER ROLLER ENGINEERING LTD

No.20, Benoi Crescent, Singapore.

Period : From 1998 to 2001 Position : QC welding Inspector

Duties and Responsibility: Pre fabrication of conveyor structure welding inspection & Follow up production activities. Inspection of all fit up in before Welding, during, after welding. Monitoring the Work, Welders techniques during the in process welding and ensuring the

Quality. Witnessing of all types of conveyors testing. Quality Control / Quality Assurance of all fabrication and construction works for project

undertaken by the company Assembling, erecting & upgrading of belt conveyors (Baggage Handling System - Changi

airport, Terminal Maintenance of existing baggage handling system). Airport baggage handling system, Automated palletizing system, Automated drum

Handling system , Air pollution control system , Multi storey automated Car parking system, Industrial fan System

14) Employer : DALMIA CEMENTS (Bharat) LTD

Tamil Nadu, India.

Period : From 1995 to 1998

Position : QC Inspector (New Project Teams)

Duties and Responsibility:

Preparing materials list, Cutting Plan, Planning production activities, Inspection sequences. Quality control inspection, preparing inspection reports, also experience in Assembling, erecting & Overall Plant machinery Maintenance Such as Conveyors & all Production equipment’s.

Pre fabrication structure welding inspection & Follow up production activities. Inspection done in all stages in equipment erections such as CVRM Mills, Cement plant

Various equipment’s, Stackers, Belt conveyors and Bucket Elevators To check the proper electrodes are used for the respective materials and the temperature has been

maintained as per the electrode manual. Checking the essential parameters as per the WPS requirements and quality procedures. Review and acceptance of mill certificate for materials and welding consumables.


jayaraj _cv

Documents