jimmy hsyan chung
TRANSCRIPT
Jimmy Hsyan I. Chung29 Tangemere Crest
Markham, On L3R 6Z1Tel: 905-944-9458 Cell: 416-617-4849
Email: [email protected]
Attention: Human Resource Manager
Dear Sir/Madam,
I would like to apply for the position of Injection Moulding Supervisor as such, I am submitting my resume for your perusal and consideration for the position.
I have over 20 years experience in plastics injection molding industry. I have experience in setting up Engel,Nissei,Ricoh,Windsor,Kawaguchia and Negri Bossi injecting molding machines. I also troubleshoot and do preventive maintenance on these machines. Additionally, I also troubleshoot machines , setup and do processing. The machines range I work with is from 25 tons - 1500 tons and I also can operate Yushin and Engel Robot.
I am a fast learner and the quality of my production standard is very high. With my extensive experience in engineering plastics, setting up mould, trouble shooting, I am confident I will be an asset to your company.
I would like to be given an opportunity to come and discuss my experiences with you, at your convenience. I can be reached at (905) 944-9458 or (416) 617-4849.
Looking forward to hearing from you, I remain.
Yours truly,
Chung Jimmy Hsyan I
Jimmy Hsyan Chung 29 Tangemere Crescent, Markham, Ontario L3R 6Z1
(905) 944-9458 or (416) 617-4849 Email;[email protected]
OBJECTIVE:Supervisor/ Production Supervisor/Team Leader/Set-Up and Processs Technician.
HIGHLIGHTS OF SUMMARY
Over 20 years working experience on plastics injection molding machines. Extensive knowledge and experience of different types of machines;Engel,
Nessei, Ricoh,Windsor, Kawaguchi, Negri Bossi and Toshiba machines. Over 5 years supervisory experience; was responsible for supervising over 10
Machine Operators and 17 machines. Fluent in Chinese (Hakka) and Hindi.
Experience in working in a QS 9000/ISO 9001 and 9002 environment
Work Experience : Northern Technology Inc.- Scarborough,On – Supervisor – July 2015 – Present. Set up,troubleshoot and processing of Engel,Nessei and Mitsubushi
machines.Make sure all the require auxillary are hook up to the mould before starting up machines. Supervise daily operational output of approximately 15 employees. Quality control daily production-reject any products that do not confirm to
specifications. Train new employees on the operation of mould machines. Assign operators to various machines to maximize output and minimize
down time.
C2P INC. - Mississauga, Ont. - Lead Hand – October 2014 – March 2015 Do mould changes for Engel,Nessei and Mitsubushi machine. Does processing and troubleshooting and parts measurement. Supervise 13 employees and assign them to the machine.Check parts quality and make first off to get approve from Q C before running the production.
Universal Gravo Plast : Set-Up and Process Technician- October 2013-October 2014 Set up molds, troubleshoot and do processing for Engel,Nessei,Nigata
and Battenfeld machines.
Humphrey Cosburn Plastic : Supervisor ( Contract ) - July 2012- March 2013. SetUp,Process and Troubleshoot for Kawaguchi machines.
Test machines after set up to ensure efficiency and ready for operation by the operators.
Supervise daily operational output of approximately 12 employees. Quality control daily production-reject any products that do not confirm to specification and make first off.
Antech Plastic : Set-Up and Processing Technician. January 2012-July 2012 Set Up,Process and Troubleshoot Engel and Nessei machines. Check the parts quality are good and make first off. Quality control daily production-reject any products that do not confirm to specification.
China Cottage Restaurant – Position: Chinese Cook – January 2011- January 2012. Prepare all vegetables and meat to be ready to cook when orders come. All ingredients are available when foods are ready to cook. Make sure kitchen are kept neat and tidy.
Automatic Plastics-ISO 9002 CERTIFIEDSupervisor December 2004- October 2010I
Set-up Nissei, Kawaguchi and Negri Bossei machines Supervise machine operators in the afternoon shift Check the quality control of the products. Does set up, trouble shoot and processing when the parts are not good. Check and monitor the quality of the production.
Progressive Moulded Products Ltd.- QSO 9000 CERTFIED. August 2001-Sept. 2003
Set up Technician Mould set-up on Nissei and Engel machines.
Set up,trouble shoot and does processing When the parts are not good. Check and monitor the Quality of the production.
Team Leader January 2000-March 2001
Hunjan Moulded Product Ltd. QSO 9000 CERTIFIED. Set up, trouble shoot and process for Engel and Nessei machine. Supervise 6 operators and looked after 10 machines Check and monitor the
Quality of the production..
Decoma Co Ex Tec- QSO 9000 CERTIFIED. Division of Magna
January 2000-May 2000Setup Technician
To set up Husky, Engel, Nissei, Ricoh and Windsor machines.Does set up, troubleshoot and processing.when the parts are not good. Check
and monitor the Quality of the production.
Hunjan Moulded Producst Ltd- QSO 9000 CERTIFIED. May 1998-January 2000
QS 9000/ISO 9000 Registered Team Leader
Set up,trouble shoot and process for Engel and Nessei Supervise 6 operators and looked after 10 machine. Check and monitor the Quality of the production.Engel and Nessei
Integrated Plastic Ltd. - Assistant Supervisor - December1983 – February 1998
Set up, troubleshoot and process for Engel and Nessei machines. Supervise daily operational output of approximately 25 employess. Assign operators to various machines to maximize output and minimize
downtime. Train new employees on the operation of mould and machines.
Education: St. Joseph College Grade 12 Equivalent
Language Spoken:English,Chinese(Hakka) and Hindi.
MATERIAL : ABS, ACETAL, POLYPROPELENE, NYLON, NYLON GLASSFILLED 13% 33%/50%, STYRENE, POLYETHYLENE, POLYCARBONATE, ACRYLIC, PC ABS, KRATON, SUNPRENE, SANTOPRENE,SARLINK AND ECT.
Certificate: Lift truck safety course, Forklift safety training, Overhead Crane, Whimis. OH&S Legislation, Health and wellness, Standard first responder and Propane cylinder handling-Industrial equipment.
Computer : Basic.
