kmw communications base station antennas for...
TRANSCRIPT
KMW Communications
Base Station Antennas
For Mobile Communications
www.kmwcomm.com
KMW Inc. (Korea) KMW Communications (USA) KMW Japan Inc. Xi’an Huatian Telecom Inc. China
65 Youngchun‐ri, Dongtan‐myun, Hwasung‐si, Kyungki‐do, 445‐813 Republic of Korea, 445‐813 +82 10 370 8600 [email protected] http://www.kmw.co.kr
1521 E. Orangethorpe Ave. Suite A Fullerton. CA 92831 United States of America +1 714 515 1100 [email protected] http://www.kmwcomm.com
I’s Bid 7F, Shinyokohama 3‐18‐5, Kouhoku, Yokohama‐si, Kanagawa‐ken, Japan (222‐0033) +81 45 478 2202 [email protected] http://www.kmwcomm.com
No. 38 South Tuanjie Road Hi‐Tech Zone of Xi’an Xi’an city, Shaanxi Province P.R China +86 29 8838 4888 [email protected] http://htctelecom.com
KMW Communications
Base Station Antennas
For Mobile Communications
www.kmwcomm.com
KMW Inc. has consistently invested 30% of total revenue in R&D. Our outstanding Engineers who are dedicated to R&D will seek creative Solutions to RF & Air Interface Products. With the upmost achieved RF patents, KMW will continue to support our superior products to our
KMW Inc. delivers innovative and core RF technology and products. As we constantly produce new technology and pursue perfection, KMW Inc. will continue to build a reputation as a global leading company that offers the best solution for the wireless infrastructure market.
KMW Inc. will insure customer satisfaction and high reliability by maintaining quality control throughout the design and manufacturing process to surpass customer expectations.
KMW Inc. is very proud to be regarded as an outstanding company for providing Proactive & Dynamic manner throughout the world. Our ability to create and innovate, we aggressively accept the challenges of future technology and competitors.
R&D Oriented Global Leader
Customer Satisfaction Proactive Manner
AISG Broad Band
Antenna Tower Mounted
Amplifier Power Distribution
Unit
Band Rejection
Filter Multi Step Combiner
Cross Band Coupler
In‐Band Combiner
CAMS
Controller
KMW Communications
Base Station Antennas
For Mobile Communications
www.kmwcomm.com
KMW Communications Introduction Antenna Products AISG High Broad Band Antenna EDTA(Electrical Down Tilt) Antenna Dual Phase® Antenna Fixed Antenna AISG Dual Broad Band Antenna EDTA Antenna AISG Low Broad Band Antenna EDTA Antenna WiMAX Antenna EDTA Antenna Dual Phase® Antenna
TMA Products Tower Mounted Amplifiers Power Distribution Unit
Filter Band Rejection Filter: Triple Mode Filter (Black Hole Filter) Multi Step Combiner: Spectrum Migration (Big Bang) In Band Combiner Dual Band Combiner Cross Band Coupler Cross Band Coupler with Sniffer Port Cross Band Coupler with Sniffer & AISG Port
CAMS (Central Antenna Management System) Accessories Bias‐T Controller PAC‐I (Portable Antenna Controller) PAC‐A (Portable Antenna Controller) AICM (Air Interface Control Master) TICU (Tower Interface Control Unit) Bracket Cables
KMW Table of Product Contents
KMW Communications
Base Station Antennas
For Mobile Communications
www.kmwcomm.com
About KMW KMW‐Simply Intelligent®
KMW has and continues to introduce the industry’s leading RF products. KMW‐Simply Intelligent® antenna, TMA, CBC, and RF components has a proven track record in manufacturing RF products for OEM and wireless operators since 1991.
Our “Research and Development” departments are located in Asia and United States with manufacturing facilities in Korea and China. KMW is ISO certified and has over 200 RF patents and trademarks such as “Dual Phase™” antenna.
OUR VISION
• Providing best solutions for the wireless industry • Maintain strategic leadership in technology, quality, and cost • Work together with people, friends, and family globally to share happiness and greater values
OUR MISSION
• RF Convergence ‐ provide most cost effective RF solutions by optimizing all resources • Better call quality and less maintenance ‐ Increase capacity and decrease CAPEX/OPEX • Create best values for customers, shareholders, and employees
KMW‐Simply Intelligent® is a development philosophy for our global product portfolio. We are the industry’s leader in deployment of advance antenna systems. We take pride in responding to customer’s RF requirements with rapid design cycles, short manufacturing ramp up times and best in class delivery time.
KMW‐Simply Intelligent® has a longstanding history of providing quality RF products to the global OEM world and the wireless operators. KMW manufactures full range of 3G/4G products.
KMW Communications
Base Station Antennas
For Mobile Communications
www.kmwcomm.com
KMW‐Simply Intelligent® antenna portfolio systems utilize advanced phase shifter and radiation techniques. Our
patented Dual Band™ and hybrid antennas provide reliable, cost effective, remote “Tilt and Steering” capabilities
that enables significant savings, virtually eliminating the need for tower crews.
Antennas KMW Antenna Products
Category Tilt Part Number Pol. BW Gain (dBi) Dimension (inch)
AISG
High Broad Band (1710 ~2170MHz)
Dual Phase® (Electrical Downtilt + Azimuth Steering)
HB‐X‐AW‐17‐65‐00T‐RET X 65 17 Φ6.2×48
HB‐X‐AW‐19‐65‐00T‐RET X 65 19 Φ6.2×72
Outdoor DAS
HB‐X‐AW‐16‐90‐00T‐RET X 90 16 Φ6.2×48 HB‐X‐AW‐18‐45‐00T‐RET X 45 18 Φ10.08×48 HB‐X‐AW‐19‐33‐00T‐RET X 33 19 Φ10.08×48 HB‐X‐AW‐23‐33‐00T‐RET X 33 23 Φ10.08×83.9 DA‐X‐AW‐13‐65‐02T X 65 12.7 Φ8.11×24 DA‐X‐AW‐14‐65‐02T3 X 65 13.5 Φ8.11×24
Fixed FX‐X‐CD‐16‐65‐00T X 65 16 12.6×7.87×54 FX‐X‐CD‐18‐65‐00T X 65 18 12.6×7.87×54
AISG
Dual Broad Band (698~896MHz, 1710~2170MHz)
EDTA (Electrical Downtilt)
AM‐X‐CD‐16‐65‐00T‐RET X 65 16 12.6×7.87×54 AM‐X‐CD‐15‐65‐00T‐RET X 65 15 11.8×6.0×48
EDTA
(Electrical Downtilt)
AM‐X‐CD‐15‐90‐00T‐RET X 90 15 11.8×6.0×48 AM‐X‐CD‐17‐65‐00T‐RET X 65 17 11.8×6.0×72 AM‐X‐CD‐17‐90‐00T‐RET X 90 17 11.8×6.0×72 AM‐X‐CD‐18‐65‐00T‐RET X 65 18 11.8×6.0×96 AM‐X‐CD‐18‐90‐00T‐RET X 90 18 11.8×6.0×96 AM‐X‐CW‐13‐90‐00T‐RET X 90 13 11.8×6.0×48 AM‐X‐CW‐14‐65‐00T‐RET X 65 14 11.8×6.0×48
AISG Low Broadband (698‐896MHz)
EDTA
(Electrical Downtilt)
AM‐X‐CW‐14‐90‐00T‐RET X 90 14 11.8×6.0×72 AM‐X‐CW‐15‐65‐00T‐RET X 65 15 11.8×6.0×72 AM‐X‐CW‐16‐90‐00T‐RET X 90 16 11.8×6.0×96 AM‐X‐CW‐17‐65‐00T‐RET X 65 17 11.8×6.0×96 AM‐V‐CW‐14‐65‐00T V 65 14 12.6×5.9×54 AM‐X‐WM‐17‐65‐00T X 65 17 6.54×2.6×48.00
AM‐X‐WM‐17‐65‐00T‐FP X 65 17 6.54×2.6×48.00
WiMAX (2496~2690MHz)
Dual Phase
(Electrical Downtilt + Azimuth Steering)
AQ‐X‐WM‐18‐65‐00T‐RET X 65 18 10×3.54×48 HB‐X‐WM‐17‐65‐00T X 65 17 7.32×48.00
HB‐X‐WM‐14‐65‐00T X 65 14 Φ7.32×24.00
AQ‐X‐WM‐18‐65‐00T‐RET X 65 18 10X3.54X48 AQ‐X‐WM‐16‐90‐00T‐RET X 90 16 Ф10.0×3.54x48 HQ‐X‐WM‐17‐65‐00T‐RET X 65 17.5 Φ10.0×48 HQ‐X‐WM‐16‐90‐00T‐RET X 90 16 Φ10.0×48
KMW Communications
Base Station Antennas
For Mobile Communications
www.kmwcomm.com
1. Dual Phase™ Technology In recent years antennas began to enter the market with remote adjustable tilt function which made some network optimization situations easier and considerably less expensive. KMW anticipated the need to make the Azimuth beam remotely adjustable as well as the Down‐Tilt. Since the remote adjustability of the Tilt angle had been known as “Single‐Phase, Adjustable,” referring to Remote Tilt and Azimuth adjustability as “Dual Phase™” seemed only natural. Since then Dual‐Phase™ antennas have saved carriers Hundreds of Thousands of dollars in CAPEX, due to the cost savings experienced in spite of the additional features, and OPEX experienced because of the savings realized when a KMW antenna needed to be adjusted for network optimization, but the need to call a tower crew to make the adjustments was not necessary.
2. KMW Single RET KMW’s Dual‐Band antennas feature independent control of Electrical Down‐Tilt for each frequency band in the antenna. While other antennas may require Two‐Independent RET (Remote Electrical Tilt) module functions for independent control of each band, the KMW Dual‐Band antennas allow independent control of both bands through a single innovative RET Module.
3. KMW High / Low Broad Band Antenna
With the recent acquisition of additional frequency bandwidth in the “700 MHz band” by carriers, KMW recognized the need to replace existing AWS and PCS‐only antennas with “Dual‐Band” antennas in order to take advantage of the newly allocated frequencies without having to acquire additional Cell‐Sites and fight additional zoning restrictions. The product offering listed here is yet another example of KMW’s ability to anticipate and meet the needs of the carriers.
4. WiMAX / LTE Antenna KMW’s WiMAX / LTE product line reflects our ability to address diverse product requirements that meets and exceeds customer’s requirements. The WiMAX / LTE products were developed to meet the stringent requirements the budding 4G Network push. The antennas and their peripherals are suitable for many WiMAX and LTE (Long Term Evolution) data and voice applications
Antennas KMW Antenna System Summary
KMW Communications
Base Station Antennas
For Mobile Communications
www.kmwcomm.com
KMW provides High Performance Tower Mounted Amplifiers (TMA) that utilize filter technology to provide very low loss and low noise figure. Our single/ twin and dual wide band TMA operates seamlessly with our D.C. pulse antenna control scheme. Product Category Part Number Description
TMA
AWS Twin TMA KUNAPC101000 1710~1755MHz (45MHz)/ 2110~2155MHz (45MHz) PCS TMA KUNATC1030010 1850~1910MHz (60MHz) / 1930~1990MHz (60MHz)
AWS Twin TMA (Broad Band)
KUNAPA103001 1710~1770MHz / 2110~2170MHz
Dual Band‐AWS Twin with Dual 700
Bypass
KUNAPA1050010 698~746MHz / 2110~2170MHz
Dual Band TMA KUNAPA102001 698~716MHz / 728~746MHz / 1710~1770MHz / 2110~2170MHz Dual Band 700
Bypass KUNAPA101001 698~746MHz / 2110~2170MHz / 1710~1770MHz
Sing Band 700MHz KUNAPA1040010 698~716MHz/ 728~746MHz Wide Band TMA KUNAPS2020000 4G WiMAX Full Band TTLNA. Improved User selection Mode.
Diversity port for AISG and Dc feeding
Product Category Part Number Description PDU Power Distribution
Unit KUNCTC102000 Supply Voltage +36[V] ~+72[V], TYP +24[V]
Max Power Consumption Max. 2.4 A Including Alarm Cable & Power cable
TMA
Power Distribution Units are rugged and designed to provide reliable, well conditioned power for our TMAs and other peripheral devices.
KMW TMA Products
PDU KMW Power Distribution Unit
KMW Communications
Base Station Antennas
For Mobile Communications
www.kmwcomm.com
<Triple Mode Resonance & Triple Notches from One Ceramic DR>
Advanced Technology • Triple Mode Resonance & Triple Notches from
One Ceramic DR. • Ceramic Resonator fabrication with maximum Q
factor, accurate resonant frequency and temperature coefficient.
• Extremely sharp rejection & high power handling.
Key Benefits • Frequency full utilization • Low Insertion Loss • Small Size & Light Weight • Low Inter Modulation Distortion • Cast Design & High Productivity
Compared Conventional vs. Black Hole Filter
Cavity Filter (TEM mode)
Ceramic Filter (TM mode)
Ceramic Filter (TEσ01 mode)
Super Conductor
Black Hole Filter
Q Factor 7500 11000 18000 45000 24000×3= 72000
Size Δ Δ Δ Δ O
Weight Δ Δ × × O
Insertion Loss × Δ O O O
Attenuation × Δ O O O
Reliability O O O × O
PIMD O O O ‐ O
Performance vs Cost Δ Δ Δ × O
Handling Power O O O × O
Bad : ×, Normal : Δ, Good : O, Very Good : O
Freq: 860MHz Q: Single Cavity Size (90 x 90 x 90mm)
Triple Mode Technology (Black Hole Filter)Filter
KMW Communications
Base Station Antennas
For Mobile Communications
www.kmwcomm.com
Product Category Part Number Description Band Rejection Filter TBD 700MHz Triple Mode Rejection Filter (Black Hole Filter) Multi Step Combiner TBD Migration Step Selectable In‐Band Co‐Siting Solution (Big Bang)
(1850 – 1990MHz) In‐Band Combiner TBD In‐Band Combiner with 30MHz Guard Band in between Pass Band TBD In‐Band Combiner with 5 MHz Guard Band in between Pass Band
Filter
Dual Band Combiner (AWS/PCS)
KUNAPA201001 AWS/PCS Band Combiner
Cross Band Coupler Standard
KDXCV0012015 Diplexer, AWS & 700MHz
Cross Band Coupler With Sniffer port
KDXCV0012016 Diplexer, AWS & 700MHz with Sniffer Port
Cross Band Coupler With Sniffer/AISG
port
KDXCV0012017 Diplexer, AWS & 700MHz with Sniffer / AISG port
Filter
Base Station Co‐Siting Solution is a growing trend in the mobile/wireless industry. We provide effective, reliable frequency multiplexers with low‐loss single‐band/ dual band/tri‐band solutions.
KMW Filter Products
CAMS Central Antenna Management System
Web interface Central Antenna Management System allows easy communication module, user update function for additional network elements, managed security module, and automatic optimization and load balancing to users to save cost, improve customer satisfaction, and reduce churn.
KMW Communications
Base Station Antennas
For Mobile Communications
www.kmwcomm.com
Accessories KMW Accessory Products
Product Category Part Number Description
Bias‐T
AWS/PCS DC Bias‐T
KASCT8R80005 Bias‐T with Lightening Arrestor. 1710~2170MHz ANT port ‐ N type(Female), BTS port ‐ N type(Male)
KASCTR182034 Bias‐T with Lightening Arrestor. 1850~1990MHz ANT port ‐ DIN type(Female), BTS port ‐ DIN type(Male)
KASCTR182035 Bias‐T with Lightening Arrestor. 1850~1990MHz ANT port ‐ DIN type(Male), BTS port ‐ DIN type(Female)
KASCTR182039 Bias‐T with Lightening Arrestor. 1710~2170MHz ANT port ‐ DIN type(Female), BTS port ‐ DIN type(Male)
KASCTR182040 Bias‐T with Lightening Arrestor. 1710~2170MHz ANT port ‐ DIN type(Male), BTS port ‐ DIN type(Female)
WiMAX Directional Coupler Bias‐T
KASCTRS82000 2496 ~ 2690MHz (TOP)
WiMAX Directional Coupler Bias‐T
KASPTRS82000 2496 ~ 2690MHZ (Bottom)
700 MHz/AWS Smart Bias‐T
KASCTPR82002 Smart Bias‐T (TOP/F/F)[700MHz / AWS]
700 MHz/AWS Smart Bias‐T
KASCTPR82003 Smart Bias‐T (Bottom/F/F)[700MHz / AWS]
700 MHz/AWS Smart Bias‐T
KASCTPR82004 Smart Bias‐T (TOP/F/M)[700MHz / AWS]
700 MHz/AWS Smart Bias‐T
KASCTPR82005 Smart Bias‐T (Bottom/F/M)[700MHz / AWS]
700 MHz/AWS Smart Bias‐T
KASCTPR82006 Smart Bias‐T (TOP/M/F)[700MHz / AWS]
700 MHz/AWS Smart Bias‐T
KASCTPR82007 Smart Bias‐T (Bottom/M/F)[700MHz / AWS]
Controller Portable Controller PACKIT‐I
Portable Antenna Controller (PAC) Universal Remote Controller Kit for AWS(1710~2170MHz) band for electrical downtilt/Azimuth steering
PAC‐A Portable Antenna Controller (PAC) Universal Remote Controller Kit for WiMAX(2496~2690MHz) for electrical downtilt/Azimuth steering
Air Interface Control Master
KUNAN0401000 Remote Electrical Tilt Antenna controller unit for BTS RACK (AWS Band)
Tower Interface Control Unit (At BTS)
KMWK‐TICU Remote Electrical Tilt Antenna controller unit for BTS RACK (AISG)
Bracket Mounting Bracket KMOPTILTBRK1 Antenna Down tilt Bracket
Cable TMA DC Cable KUNCTC102000 TMA DC Cable Approx 6.5 Ft (For connection between PDU to Bias‐T) requires 1 Unit per TMA
SMA Cable 10M RG‐316 SMA 10M RG‐316 SMA Cable 10M RG‐400 SMA 10M RG‐400 SMA Cable
30M RG‐400 SMA 30M RG‐400 SMA Cable 40M RG‐400 SMA 40M RG‐400 SMA Cable
50M RG‐400 SMA 50M RG‐400 SMA Cable
60M RG‐400 SMA 60M RG‐400 SMA Cable
70M RG‐400 SMA 70M RG‐400 SMA Cable 80M RG‐400 SMA 80M RG‐400 SMA Cable 90M RG‐400 SMA 90M RG‐400 SMA Cable 100M RG‐400 SMA 100M RG‐400 SMA Cable 150M RG‐400 SMA 150M RG‐400 SMA Cable
KMW manufactures antenna’s mounting accessories. Our products include convenience components, such as Bias‐Ts, mechanical tilt brackets, and control cables.
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Antenna Products
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
HB-X-AW-17-65-00T-RET Hybrid 2-way Antenna-Electrical DownTilt & Steering
1710 ~ 2170MHz, X-pol., H65˚ / V 7.5˚
Electrical Specification Frequency Range 1710~2170MHz
Gain 17.0 dBi
Beamwidth Horizontal 65˚
Vertical 7.5˚
Impedance 50Ω
VSWR ≤1.4:1
Polarization Dual, Slant ±45˚
Upper 1st Sidelobe Suppression ≥18 dB (@downtilt 0˚)
Front-to-Back Ratio ≥25 dB
Cross Polarization Ratio ≥18 dB
Adjustable Downtilt Range 0˚ ~ 15˚
Horizontal Beam Steering -30˚ ~ +30˚
Port-to-port Isolation ≥30 dB
PIMD ≤-150 dBc
Input Maximum CW Power 250 W
Control Interface AISG 2.0
Specifications are subject to change.
Horizontal Pattern Vertical Pattern (Downtilt 0˚)
Horizontal Beam Steering Vertical Pattern (Downtilt 15˚)
Dimension (Diameter×H) Φ156×1219mm(Φ6.2×48inch)
Weight (Without clamp) 9.0 kg(19.84 lb)
Connector 2 x 7/16 DIN(F) / Bottom
Max Wind Speed 60m/s(135mph)
Wind Load (@100 mph) 43.82 lbf (194.85 N)
Mechanical Specification
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
HB-X-AW-19-65-00T-RET
Hybrid 2-way Antenna-Electrical DownTilt & Steering
1710 ~ 2170MHz, X-pol., H65˚ / V5.0˚
Electrical Specification Frequency Range 1710~2170MHz
Gain 19.0 dBi
Beamwidth Horizontal 65˚
Vertical 5.0˚
Impedance 50Ω
VSWR ≤1.4:1
Polarization Dual, Slant ±45˚
Upper 1st Sidelobe Suppression ≥18 dB (@downtilt 0˚)
Front-to-Back Ratio ≥25 dB
Cross Polarization Ratio ≥18 dB
Adjustable Downtilt Range 0˚ ~ 6˚
Horizontal Beam Steering -30˚ ~ +30˚
Port-to-port Isolation ≥30 dB
PIMD ≤-150 dBc
Input Maximum CW Power 250 W
Control Interface AISG 2.0
Specifications are subject to change.
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
Horizontal Beam Steering Vertical Pattern(Downtilt 6˚)
Dimension (Diameter) Φ156×1829mm(Φ6.2×72inch)
Weight (Without clamp) 12.5 kg(27.55 lb)
Connector 2 x 7/16 DIN(F) / Bottom
Max Wind Speed 60m/s(135mph)
Wind Load (@100 mph) 43.82 lbf (194.85 N)
Mechanical Specification
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
HB-X-AW-16-90-00T-RET Hybrid 2-way Antenna-Electrical DownTilt & Steering
1710 ~ 2170MHz, X-pol., H90˚ / V7.8˚
Electrical Specification
Frequency Range 1710~2170MHz
Gain 16.0 dBi
Beamwidth Horizontal 90˚
Vertical 7.8˚
Impedance 50Ω
VSWR ≤1.4:1
Polarization Dual, Slant ±45˚
Upper 1st Sidelobe Suppression ≥18 dB (@downtilt 0˚)
Front-to-Back Ratio ≥25 dB
Cross Polarization Ratio ≥18 dB
Adjustable Downtilt Range 0˚ ~ 10˚
Horizontal Beam Steering -30˚ ~ +30˚
Port-to-port Isolation ≥30 dB
PIMD ≤-150 dBc
Input Maximum CW Power 250 W
Control Interface AISG 2.0
Specifications are subject to change.
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
Horizontal Beam steering Vertical Pattern(Downtilt 10˚)
Dimension (Diameter×H) Φ156×1219mm (Φ6.2×48inch)
Weight (Without clamp) 9.0 kg (19.84 lb)
Connector 2 x 7/16 DIN(F) / Bottom
Max Wind Speed 60m/s(135mph)
Wind Load (@100 mph) 43.82 lbf (194.85 N)
Mechanical Specification
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
HB-X-AW-18-45-00T-RET Hybrid 2-way Antenna-Electrical DownTilt & Steering
1710 ~ 2170MHz, X-pol., H45˚ / V7.5˚
Electrical Specification
Frequency Range 1710~2170MHz
Gain 18.5 dBi
Beamwidth Horizontal 45˚
Vertical 7.5˚
Impedance 50Ω
VSWR ≤1.4:1
Polarization Dual, Slant ±45˚
Upper 1st Sidelobe Suppression ≥18 dB (@downtilt 0˚)
Front-to-Back Ratio ≥30 dB
Adjustable Downtilt Range 0˚ ~ 10˚
Horizontal Beam Steering -30˚ ~ +30˚
Port-to-port Isolation ≥30 dB
PIMD ≤-150 dBc
Input Maximum CW Power 250 W
Control Interface AISG 2.0
Specifications are subject to change.
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
Horizontal Beam steering Vertical Pattern(Downtilt 10˚)
Dimension(Diameter×H) Φ256×1219mm(Φ10.08×48inch)
Weight(Without clamp) 14 kg (30.87 lb)
Connector 2 x 7/16 DIN(F) / Bottom
Max Wind Speed 60m/s(135mph)
Wind Load (@100 mph) 71.80 lbf (319.25 N)
Mechanical Specification
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
HB-X-AW-19-33-00T-RET Hybrid 2-way Antenna-Electrical DownTilt & Steering
1710 ~ 2170MHz, X-pol., H33˚ / V7.2˚
Electrical Specification
Frequency Range 1710~2170MHz
Gain 19.0 dBi
Beamwidth Horizontal 33˚
Vertical 7.2˚
Impedance 50Ω
VSWR ≤1.4:1
Polarization Dual, Slant ±45˚
Upper 1st Sidelobe Suppression ≥18 dB (@downtilt 0˚)
Front-to-Back Ratio ≥30 dB
Adjustable Downtilt Range 0˚ ~ 10˚
Horizontal Beam Steering -30˚ ~ +30˚
Port-to-port Isolation ≥30 dB
PIMD ≤-150 dBc
Input Maximum CW Power 250 W
Control Interface AISG 2.0
Specifications are subject to change.
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
Horizontal Beam steering Vertical Pattern(Downtilt 10˚)
Dimension(Diameter×H) Φ256×1219mm(Φ10.08×48inch)
Weight(Without clamp) 14 kg (30.87 lb)
Connector 2 x 7/16 DIN(F) / Bottom
Max Wind Speed 60m/s(135mph)
Wind Load (@100 mph) 71.80 lbf (319.25 N)
Mechanical Specification
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
HB-X-AW-23-33-00T-RET [Preliminary]
Hybrid 2-way Antenna-Electrical DownTilt & Steering
1710 ~ 2170MHz, X-pol., H33˚ / V4.2˚
Electrical Specification Frequency Range 1710~2170MHz
Gain 23.0 dBi
Beamwidth Horizontal 33˚
Vertical 4.2˚
Impedance 50Ω
VSWR ≤1.4:1
Polarization Dual, Slant ±45˚
Upper 1st Sidelobe Suppression ≥18 dB (@downtilt 0˚)
Front-to-Back Ratio ≥25 dB
Cross Polarization Ratio ≥18 dB
Adjustable Downtilt Range 0˚ ~ 4˚
Horizontal Beam Steering -30˚ ~ +30˚
Port-to-port Isolation ≥30 dB
PIMD ≤-150 dBc
Input Maximum CW Power 250 W
Control Interface AISG 2.0
Specifications are subject to change.
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
Horizontal Beam steering Vertical Pattern(Downtilt 4˚)
Dimension(Diameter×H) Φ256×2131mm(Φ10.08×83.9inch)
Weight(Without clamp) 20 kg (44.1 lb)
Connector 2 x 7/16 DIN(F) / Bottom
Max Wind Speed 60m/s(135mph)
Wind Load (@100 mph) 125.46 lbf (557.83 N)
Mechanical Specification
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
DA-X-AW-13-65-02T [Preliminary Spec]
Fixed Electrical DownTilt Antenna
1710 ~ 2180MHz, X-pol., H65˚ / V16˚
Electrical Specifications Frequency Range 1710~2180MHz
Gain 12.7 dBi×3sectors
Beamwidth Horizontal 65˚
Vertical 16.0˚
VSWR ≤1.4:1
Polarization Dual, Slant ±45˚
Impedance 50Ω
Fixed Electrical Downtilt 2˚
Upper 1st Sidelobe Suppression ≥18 dB
Front-to-Back Ratio ≥25 dB
Passive Intermodulation, IM3 ≤-150 dBc (@43dBm, 2tones)
Input Maximum CW Power 200 W
Specifications are subject to change.
l
Horizontal Pattern Vertical Pattern (Downtilt 0˚)
Dimension(Dia.×H) Φ8.11×24 inches
Weight 35 lbs (Without Mount Adaptor)
Connector 6 x 7/16 DIN(F) / Bottom
1 x SMA(F) / Bottom
Max Wind Speed 150mph
Mechanical Specification
Vertical Pattern (Downtilt 6˚)
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
DA-X-AW-13-65-02T [Preliminary Spec] Fixed Electrical DownTilt Antenna Block Diagram
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
DA-X-AW-14-65-02T3 [Preliminary Spec] Fixed Electrical DownTilt Antenna
1710 ~ 2180MHz, X-pol., H65˚ / V16˚
Electrical Specifications
Frequency Range 1710~2180MHz
Gain 13.5 dBi×3sectors
Omni Gain 8.8dBi
Beamwidth Horizontal 65˚
Vertical 16.0˚
VSWR ≤1.4:1
Polarization Dual, Slant ±45˚
Impedance 50Ω
Fixed Electrical Downtilt 2˚
Horizontal Beam steering N/A
Upper 1st Sidelobe Suppression ≥18 dB
Front-to-Back Ratio ≥25 dB
Passive Intermodulation, IM3 ≤-150 dBc (@43dBm, 2tones)
Input Maximum CW Power 200 W
Specifications are subject to change.
l
Horizontal Pattern Vertical Pattern (Downtilt 0˚)
Dimension(Dia.×H) Φ8.11×24 inches
Weight 30 lbs (Without Mount Adaptor)
Connector 2 x 7/16 DIN(F) / Bottom
1 x SMA(F) / Bottom
Max Wind Speed 150mph
Mechanical Specification
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
DA-X-AW-14-65-02T3 [Preliminary Spec] Fixed Electrical DownTilt Antenna
3WAY Combiner
Frequency Range 1710~2180MHz
Insertion Loss ≤0.3dB(above 4.78dB)
VSWR ≤1.3:1
Connector Type 7/16 DIN(F)
Impedance 50Ω
Input Maximum CW Power 200 W
Block Diagram
Alpha Beta Gamma
+45 -45
Control
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
FX-X-CD-16-65-00T-RET Dual Band Electrical DownTilt Antenna
698 ~ 894MHz, X-pol., H65˚ / V15˚ 1710 ~ 2170MHz, X-pol., H65˚ / V7.5˚
Electrical Specification
Frequency Range 698 ~ 894 MHz 1710 ~ 2170 MHz
Gain 14.0 dBi 16.5.0 dBi
Beamwidth Horizontal 65° 65°
Vertical 15° 7.5°
Impedance 50Ω 50Ω
VSWR ≤1.5:1 ≤1.5:1
Polarization Dual, Slant ±45° Dual, Slant ±45°
Front-to-Back Ratio ≥30 dB ≥30 dB
Electrical Downtilt Range Fixed Fixed
Passive Intermediation ≤ -150 dBc ≤ -150 dBc
Input Maximum CW Power 500W 250W
Dimension (W×D×H) 12.6×7.87×54 inches
Weight (Without clamp) 15.0 kg (33.0 lb)
Connector 4 x 7/16 DIN(F),Bottom
Max Wind Speed 60 m/s
Specifications are subject to change.
Mechanical Specification
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
FX-X-CD-16-65-00T-RET Dual Band Electrical Down Tilt Antenna
[700MHz_Band Pattern]
[AWS_Band Pattern]
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
Horizontal Pattern Vertical Pattern (Downtilt 0˚)
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
FX-X-CD-18-65-00T-RET Dual Band Electrical DownTilt Antenna
698 ~ 894MHz, X-pol., H65˚ / V10˚ 1710 ~ 2170MHz, X-pol., H65˚ / V6.0˚
Electrical Specification
Frequency Range 698 ~ 894 MHz 1710 ~ 2170 MHz
Gain 14.0 dBi 16.5 dBi
Beamwidth Horizontal 65° 65°
Vertical 10° 6.0°
Impedance 50Ω 50Ω
VSWR ≤1.5:1 ≤1.5:1
Polarization Dual, Slant ±45° Dual, Slant ±45°
Front-to-Back Ratio ≥30 dB ≥30 dB
Electrical Downtilt Range Fixed Fixed
Passive Intermediation ≤ -150 dBc ≤ -150 dBc
Input Maximum CW Power 500W 250W
Dimension (W×D×H) 12.6×7.87×54 inches
Weight (Without clamp) 20.0 kg (44.1 lb)
Connector 4 x 7/16 DIN(F),Bottom
Max Wind Speed 60 m/s
Specifications are subject to change.
Mechanical Specification
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
FX-X-CD-18-65-00T-RET Dual Band Electrical Down Tilt Antenna
[700MHz_Band Pattern]
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
[AWS Band Pattern]
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-16-65-00T-RET (54”) Dual Band Electrical DownTilt Antenna
698 ~ 894MHz, X-pol., H65˚ / V15˚ 1710 ~ 2170MHz, X-pol., H65˚ / V7.5˚
Electrical Specification
Frequency Range 698 ~ 894 MHz 1710 ~ 2170 MHz
Gain 14.0 dBi 16.5.0 dBi
Beamwidth Horizontal 65° 65°
Vertical 15° 7.5°
Impedance 50Ω 50Ω
VSWR ≤1.5:1 ≤1.5:1
Polarization Dual, Slant ±45° Dual, Slant ±45°
Front-to-Back Ratio ≥30 dB ≥30 dB
Electrical Downtilt Range 0° ~ 8° 0° ~ 8°
Passive Intermediation ≤ -150 dBc ≤ -150 dBc
Input Maximum CW Power 500W 250W
Mechanical Specification
Dimension (W×D×H) 12.6×7.87×54 inches
Weight (Without clamp) 15.0 kg (33.0 lb)
Connector 4 x 7/16 DIN(F),Bottom
Max Wind Speed 60 m/s
Specifications are subject to change.
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-16-65-00T-RET (54”) Dual Band Electrical Down Tilt Antenna
[700MHz_Band Pattern]
Vertical Pattern(Downtilt 8˚)
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
Vertical Pattern(Downtilt 8˚)
[AWS_Band Pattern]
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CW-14-65-00T-RET (4’ 65˚ Broadband Antenna) Single Band Electrical DownTilt Antenna 698 ~ 894MHz, X-pol., H65˚ / V17˚ Electrical Specification
Frequency Range 698~806MHz 806~894MHz
Impedance 50Ω
Polarization Dual, Slant ±45˚
Gain 14.0dBi / 11.85dBd 15.0dBi / 12.85dBd
Beamwidth Horizontal 67˚ 66˚
Vertical 17.8˚ 16.5˚
VSWR ≤1.4:1
Front-to-Back Ratio ≥27 dB
Electrical Downtilt Range 2˚ ~ 16˚
Isolation Between Ports ≥30 dB
Cross Pole Discrimination 10.0 dB @ ±60˚ 15.0 dBi @ 0˚
First Upper Side Lobe Suppression 16dB
Side Lobe Suppression > 16dB @ 0-6˚ Tilt
> 18 dB @ 7-12˚ Tilt(Up to 15˚ from Boresight)
Passive Intermodulation ≤ -150 dBc @ 2x20w
Input Maximum CW Power 500 W
Environmental Compliance IP65 for Radome
IP67 for Connectors
RET Motor Configuration Field Replaceable RET Electronic Control Module /
RET Motor is internal to antenna & not field replaceable
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Mechanical Specification
Dimension (W×D×H) 11.8×5.9×48 inches (300×150×1219 mm)
Weight (Without clamp) 30.8 lbs (14.0 kg)
Connector
2 x 7/16 DIN(F), Long Neck
Max Wind Speed 150 mph
Wind Load (@150 mph) 1260 N
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CW-14-65-00T-RET(4’ 65˚ Broadband Antenna)
Horizontal Pattern Vertical Pattern (Downtilt 2˚)
700MHz band Pattern
700MHz
+45˚
700MHz
45˚
RET
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CW-14-65-00T-RET(4’ 65˚ Broadband Antenna) Antenna Drawings and Installation Diagram
Ø1.97 ~ 3.15inch OD.(50 ~ 80mm OD.)
MOUNT POLE
2 Hex. Cap Bolt, M10Plain Washer, M10Spring Washer, M10
543
Hex. Nut, M10
PART NAME1
No.FIXED CLAMP
17mm Spanner4
240kgf.cm 208lbf.inch
48
4
4Q'TY Recommending Torque
3 4 5
21
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CW-16-65-00T-RET(6’ 65˚ Broadband Antenna)
Single Band Electrical DownTilt Antenna 698 ~ 894MHz, X-pol., H65˚ / V11.5˚ Electrical Specification
Frequency Range 698~806MHz 806~894MHz
Impedance 50Ω
Polarization Dual, Slant ±45˚
Gain 15.5dBi / 13.35dBd 16.0dBi / 13.85dBd
Beamwidth Horizontal 67.5˚ 67˚
Vertical 11.8˚ 11.3˚
VSWR ≤1.4:1
Front-to-Back Ratio ≥27 dB
Electrical Downtilt Range 2˚ ~ 16˚
Isolation Between Ports ≥30 dB
Cross Pole Discrimination 10.0 dB @ ±60˚ 15.0 dBi @ 0˚
First Upper Side Lobe Suppression 16dB
Side Lobe Suppression > 16dB @ 0-6˚ Tilt
> 18 dB @ 7-12˚ Tilt(Up to 10˚ from Boresight)
Passive Intermodulation ≤ -150 dBc @ 2x20w
Input Maximum CW Power 500 W
Environmental Compliance IP65 for Radome
IP67 for Connectors
RET Motor Configuration Field Replaceable RET Electronic Control Module /
RET Motor is internal to antenna & not field replaceable
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Mechanical Specification
Dimension (W×D×H) 11.8×5.9×72 inches (300×150×1829mm)
Weight (Without clamp) 41.8 lbs (19.0 kg)
Connector
2 x 7/16 DIN(F), Long Neck
Max Wind Speed 150 mph
Wind Load (@150 mph) 1891 N
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CW-16-65-00T-RET (6’ 65˚ Broadband Antenna)
Horizontal Pattern Vertical Pattern (Downtilt 2˚)
700MHz band Pattern
700MHz
+45˚
700MHz
45˚
RET
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CW-16-65-00T-RET (6’ 65˚ Broadband Antenna) Antenna Drawings and Installation Diagram
Ø1.97 ~ 3.15inch OD.(50 ~ 80mm OD.)
MOUNT POLE
2 Hex. Cap Bolt, M10Plain Washer, M10Spring Washer, M10
543
Hex. Nut, M10
PART NAME1
No.FIXED CLAMP
17mm Spanner4
240kgf.cm 208lbf.inch
48
4
4Q'TY Recommending Torque
3 4 5
21
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CW-18-65-00T-RET (8’ 65˚ Broadband Antenna)
Single Band Electrical DownTilt Antenna 698 ~ 894MHz, X-pol., H65˚ / V8.0˚ Electrical Specification
Frequency Range 698~806MHz 806~894MHz
Impedance 50Ω
Polarization Dual, Slant ±45˚
Gain 16.8 dBi / 14.55dBd 17.5 dBi / 15.35dBd
Beamwidth Horizontal 68˚ 62˚
Vertical 9.2˚ 8.0˚
VSWR ≤1.4:1
Front-to-Back Ratio ≥27 dB
Electrical Downtilt Range 2˚ ~ 16˚
Isolation Between Ports ≥30 dB
Cross Pole Discrimination 10.0 dB @ ±60˚ 15.0 dBi @ 0˚
First Upper Side Lobe Suppression 16dB
Side Lobe Suppression > 16dB @ 0-6˚ Tilt
> 18 dB @ 7-12˚ Tilt(Up to 10˚ from Boresight)
Passive Intermodulation ≤ -150 dBc @ 2x20w
Input Maximum CW Power 500 W
Environmental Compliance IP65 for Radome
IP67 for Connectors
RET Motor Configuration Field Replaceable RET Electronic Control Module /
RET Motor is internal to antenna & not field replaceable
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Mechanical Specification
Dimension (W×D×H) 11.8×6.0×96 inches
Weight (Without clamp) 52.9 lbs (24.0 kg)
Connector
2 x 7/16 DIN(F), Long Neck
Max Wind Speed 150 mph
Wind Load (@150 mph) 2521 N
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CW-18-65-00T-RET (8’ 65˚ Broadband Antenna)
Horizontal Pattern Vertical Pattern (Downtilt 2˚)
700MHz band Pattern
700MHz
+45˚
700MHz
45˚
RET
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CW-18-65-00T-RET (8’ 65˚ Broadband Antenna) Antenna Drawings and Installation Diagram
Ø1.97 ~ 3.15inch OD.(50 ~ 80mm OD.)
MOUNT POLE
2 Hex. Cap Bolt, M10Plain Washer, M10Spring Washer, M10
543
Hex. Nut, M10
PART NAME1
No.FIXED CLAMP
17mm Spanner4
240kgf.cm 208lbf.inch
48
4
4Q'TY Recommending Torque
3 4 5
21
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CW-13-85-00T-RET (4’ 85˚ Broadband Antenna)
Single Band Electrical DownTilt Antenna 698 ~ 894MHz, X-pol., H85˚ / V17˚ Electrical Specification
Frequency Range 698~806MHz 806~894MHz
Impedance 50Ω
Polarization Dual, Slant ±45˚
Gain 12.2 dBi / 10.05dBd 13.0 dBi / 10.85 dBd
Beamwidth Horizontal 85˚ 80˚
Vertical 18.3˚ 17˚
VSWR ≤1.4:1
Front-to-Back Ratio ≥25 dB
Electrical Downtilt Range 2˚ ~ 16˚
Isolation Between Ports ≥30 dB
Cross Pole Discrimination 10.0 dB @ ±60˚
15.0 dB @0˚
First Upper Side Lobe Suppression 16 dB
Side Lobe Suppression > 16dB @ 0-6˚ Tilt
> 18 dB @ 7-12˚ Tilt(Up to 15˚ from Boresight)
Passive Intermodulation ≤ -150 dBc @ 2x20w
Input Maximum CW Power 500 W
Environmental Compliance IP65 for Radome
IP67 for Connectors
RET Motor Configuration Field Replaceable RET Electronic Control Module /
RET Motor is internal to antenna & not field replaceable
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Mechanical Specification
Dimension (W×D×H) 11.8×6.0×48 inches
Weight (Without clamp) 30.8 lbs (14.0 kg)
Connector
2 x 7/16 DIN(F), Long Neck
Max Wind Speed 150 mph
Wind Load (@150 mph) 1260 N
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CW-13-85-00T-RET (4’ 85˚ Broadband Antenna)
Horizontal Pattern Vertical Pattern (Downtilt 2˚)
700MHz band Pattern
700MHz
+45˚
700MHz
45˚
RET
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CW-13-85-00T-RET (4’ 85˚ Broadband Antenna) Antenna Drawings and Installation Diagram
Ø1.97 ~ 3.15inch OD.(50 ~ 80mm OD.)
MOUNT POLE
2 Hex. Cap Bolt, M10Plain Washer, M10Spring Washer, M10
543
Hex. Nut, M10
PART NAME1
No.FIXED CLAMP
17mm Spanner4
240kgf.cm 208lbf.inch
48
4
4Q'TY Recommending Torque
3 4 5
21
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CW-15-85-00T-RET(6’ 85˚ Broadband Antenna)
Single Band Electrical DownTilt Antenna 698 ~ 894MHz, X-pol., H85˚ / V12˚ Electrical Specification
Frequency Range 698~806MHz 806~894MHz
Impedance 50Ω
Polarization Dual, Slant ±45˚
Gain 13.7 dBi / 11.55dBd 14.5 dBi / 12.35dBd
Beamwidth Horizontal 85˚ 80˚
Vertical 13.2˚ 12˚
VSWR ≤1.4:1
Front-to-Back Ratio ≥25 dB
Electrical Downtilt Range 2˚ ~ 16˚
Isolation Between Ports ≥30 dB
Cross Pole Discrimination 10.0 dB @ ±60˚
15.0 dB @0˚
First Upper Side Lobe Suppression 16dB
Side Lobe Suppression > 16dB @ 0-6˚ Tilt
> 18 dB @ 7-12˚ Tilt (Up to 10˚ from Boresight)
Passive Intermodulation ≤ -150 dBc @ 2x20w
Input Maximum CW Power 500 W
Environmental Compliance IP65 for Radome
IP67 for Connectors
RET Motor Configuration Field Replaceable RET Electronic Control Module /
RET Motor is internal to antenna & not field replaceable
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Mechanical Specification
Dimension (W×D×H) 11.8×6.0×72 inches
Weight (Without clamp) 41.8 lbs (19.0 kg)
Connector
2 x 7/16 DIN(F), Long Neck
Max Wind Speed 150 mph
Wind Load (@150 mph) 1891 N
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CW-15-85-00T-RET (6’ 85˚ Broadband Antenna)
Horizontal Pattern Vertical Pattern (Downtilt 2˚)
700MHz band Pattern
700MHz
+45˚
700MHz
45˚
RET
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CW-15-85-00T-RET (6’ 85˚ Broadband Antenna) Antenna Drawings and Installation Diagram
Ø1.97 ~ 3.15inch OD.(50 ~ 80mm OD.)
MOUNT POLE
2 Hex. Cap Bolt, M10Plain Washer, M10Spring Washer, M10
543
Hex. Nut, M10
PART NAME1
No.FIXED CLAMP
17mm Spanner4
240kgf.cm 208lbf.inch
48
4
4Q'TY Recommending Torque
3 4 5
21
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CW-16-85-00T-RET(8’ 85˚ Broadband Antenna)
Single Band Electrical DownTilt Antenna 698 ~ 894MHz, X-pol., H85˚ / V8.0˚ Electrical Specification
Frequency Range 698~806MHz 698~894MHz
Impedance 50Ω
Polarization Dual, Slant ±45˚
Gain 14.8dBi / 12.65dBd 15.5 dBi / 13.35dBd
Beamwidth Horizontal 85˚ 80˚
Vertical 9.2˚ 8˚
VSWR ≤1.4:1
Front-to-Back Ratio ≥25 dB
Electrical Downtilt Range 2˚ ~ 16˚
Isolation Between Ports ≥30 dB
Cross Pole Discrimination 10.0 dB @ ±60˚
15.0 dB @0˚
First Upper Side Lobe Suppression 16dB
Side Lobe Suppression > 16dB @ 0-6˚ Tilt
> 18 dB @ 7-12˚ Tilt (Up to 10˚ from Boresight)
Passive Intermodulation ≤ -150 dBc @ 2x20w
Input Maximum CW Power ©500 W
Environmental Compliance IP65 for Radome
IP67 for Connectors
RET Motor Configuration Field Replaceable RET Electronic Control Module /
RET Motor is internal to antenna & not field replaceable
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Mechanical Specification
Dimension (W×D×H) 11.8×6.0×96 inches
Weight (Without clamp) 52.9 lbs (24.0 kg)
Connector
2 x 7/16 DIN(F), Long Neck
Max Wind Speed 150 mph
Wind Load (@150 mph) 2521 N
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CW-16-85-00T-RET (8’ 85˚ Broadband Antenna)
Horizontal Pattern Vertical Pattern (Downtilt 2˚)
700MHz band Pattern
700MHz
+45˚
700MHz
45˚
RET
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CW-16-85-00T-RET (8’ 85˚ Broadband Antenna) Antenna Drawings and Installation Diagram
Ø1.97 ~ 3.15inch OD.(50 ~ 80mm OD.)
MOUNT POLE
2 Hex. Cap Bolt, M10Plain Washer, M10Spring Washer, M10
543
Hex. Nut, M10
PART NAME1
No.FIXED CLAMP
17mm Spanner4
240kgf.cm 208lbf.inch
48
4
4Q'TY Recommending Torque
3 4 5
21
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-14-65-00T-RET (4’ 65˚ Dual Broadband Antenna) Dual Band Electrical DownTilt Antenna
698 ~ 894MHz, X-pol., H65˚ / V17.0˚
1710 ~ 2170MHz, X-pol., H65˚ / V8.5˚
Electrical Specification Frequency Range 698~894MHz 1710~2170MHz
Impedance 50Ω
Polarization Dual, Slant ±45˚
Gain 14.0dBi / 11.85dBd @ 698-806MHz 14.8dBi / 12.65dBd @ 824-894MHz
16.1dBi / 13.95dBd @1710-1755MHz 16.3dBi / 14.15dBd @1850-1900MHz 16.0dBi / 13.85dBd @2110-2155MHz
Beamwidth
Horizontal 67˚ @ 698-806MHz 65˚ @ 824-894MHz
60˚ @ 1710-1755MHz 61˚ @ 1850-1900MHz 64˚ @ 2110-2155MHz
Vertical 17.5 @ 698-806MHz 16.5˚ @ 824-894MHz
8.8˚ @ 1710-1755MHz 8.5˚ @ 1850-1900MHz 8.0˚ @ 2110-2155MHz
VSWR ≤1.5:1
Front-to-Back Ratio ≥28 dB
Electrical Downtilt Range 2˚ ~ 16˚ 0˚ ~ 10˚
Isolation Between Ports ≥30 dB
Isolation Between Ports of Different Frequency Elements ≥35 dB
Cross Pole Discrimination 10.0 dB @ ±60˚ 15.0 dBi @ 0˚
First Upper Side Lobe Suppression 16dB
Side Lobe Suppression > 16 dB @ 0-6˚ Tilt
> 18 dB @ 7-12˚ Tilt (Up to 15˚ from Boresight)
> 16 dB @ 0-6˚ Tilt > 18 dB @ 7-10˚ Tilt
(Up to 15˚ from Boresight)
Passive Intermodulation ≤ -150 dBc @ 2x20w
Input Maximum CW Power 500 W 300 W
Environmental Compliance IP65 for Radome
IP67 for Connectors
RET Motor Configuration Field Replaceable RET Electronic Control Module /
RET Motor is internal to antenna & not field replaceable
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Dimension (W×D×H) 11.8×5.9×48 inches (300×150×1219mm)
Weight (Without clamp) 36.4 lbs (16.5 kg)
Connector
4 x 7/16 DIN(F), Long Neck
Max Wind Speed 150 mph
Wind Load (@150 mph) 1260 N
Mechanical Specification
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-14-65-00T-RET (4’ 65˚ Dual Broadband Antenna)
Horizontal Pattern Vertical Pattern (Downtilt 2˚)
700MHz band Pattern
Horizontal Pattern Vertical Pattern (Downtilt 0˚)
AWS band Pattern
700MHz
+45˚
700MHz
45˚
RET
AWS
+45˚
AWS
45˚
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-14-65-00T-RET (4’ 65˚ Dual Broadband Antenna) Antenna Drawings and Installation Diagram
MOUNT POLE
(50 ~ 80mm OD.)Ø1.97 ~ 3.15inch OD. PART NAME
23
1No.
54 Spring Washer, M10
FIXED CLAMP
Hex. Nut, M10
Plain Washer, M10Hex. Cap Bolt, M10
4Q'TY
4
84
4
240kgf.cm
17mm Spanner
Recommending Torque
208lbf.inch
543
21
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-16-65-00T-RET(6’ 65˚ Dual Broadband Antenna) Dual Band Electrical DownTilt Antenna
698 ~ 894MHz, X-pol., H65˚ / V12˚
1710 ~ 2170MHz, X-pol., H65˚ / V6.0˚
Electrical Specification Frequency Range 698~894MHz 1710~2170MHz
Impedance 50Ω
Polarization Dual, Slant ±45˚
Gain 15.5dBi / 13.35dBd @ 698-806MHz 16.0dBi / 13.85dBd @ 824-894MHz
17.3dBi / 15.15dBd @ 1710-1755MHz 17.4dBi / 15.25dBd @ 1850-1900MHz 17.1dBi / 14.95dBd @ 2110-2155MHz
Beamwidth
Horizontal 65˚ @ 698-806MHz 63˚ @ 824-894MHz
65˚ @ 1710-1755MHz 67˚ @ 1850-1900MHz 69˚ @ 2110-2155MHz
Vertical 12.3˚ @ 698-806MHz 11.5˚ @ 824-894MHz
6.5˚ @ 1710-1755MHz 6.0˚ @ 1850-1900MHz 5.7˚ @ 2110-2155MHz
VSWR ≤1.5:1
Front-to-Back Ratio ≥27 dB
Electrical Downtilt Range 2˚ ~ 16˚ 0˚ ~ 10˚
Isolation Between Ports ≥30 dB
Isolation Between Ports of Different Frequency Elements ≥35 dB
Cross Pole Discrimination 10.0 dB @ ±60˚ 15.0 dBi @ 0˚
First Upper Side Lobe Suppression 16dB
Side Lobe Suppression > 16 dB @ 0-6˚ Tilt > 18 dB @ 7-12˚ Tilt
(Up to 10˚ from Boresight)
> 16 dB @ 0-6˚ Tilt > 18 dB @ 7-10˚ Tilt
(Up to 10˚ from Boresight)
Passive Intermodulation ≤ -150 dBc @ 2x20w
Input Maximum CW Power 500 W 300 W
Environmental Compliance IP65 for Radome
IP67 for Connectors
RET Motor Configuration Field Replaceable RET Electronic Control Module /
RET Motor is internal to antenna & not field replaceable
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Mechanical Specification
300
Dimension (W×D×H) 11.8×5.9×72 inches (300×150×1829mm)
Weight (Without clamp) 48.5 lbs (22.0 kg)
Connector
4 x 7/16 DIN(F), Long Neck
Max Wind Speed 150 mph
Wind Load (@150 mph) 1891 N
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-16-65-00T-RET(6’ 65˚ Dual Broadband Antenna)
Horizontal Pattern Vertical Pattern (Downtilt 2˚)
700MHz band Pattern
Horizontal Pattern Vertical Pattern (Downtilt 0˚)
AWS band Pattern
700MHz
+45˚
700MHz
45˚
RET
AWS
+45˚
AWS
45˚
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-16-65-00T-RET(6’ 65˚ Dual Broadband Antenna) Antenna Drawings and Installation Diagram
MOUNT POLE
(50 ~ 80mm OD.)Ø1.97 ~ 3.15inch OD. PART NAME
23
1No.
54 Spring Washer, M10
FIXED CLAMP
Hex. Nut, M10
Plain Washer, M10Hex. Cap Bolt, M10
4Q'TY
4
84
4
240kgf.cm
17mm Spanner
Recommending Torque
208lbf.inch
543
21
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-17-65-00T-RET(8’ 65˚ Dual Broadband Antenna) Dual Band Electrical DownTilt Antenna
698 ~ 894MHz, X-pol., H65˚ / V8.0˚
1710 ~ 2170MHz, X-pol., H65˚ / V7.0˚
Electrical Specification Frequency Range 698~894MHz 1710~2170MHz
Impedance 50Ω
Polarization Dual, Slant ±45˚
Gain 16.8dBi / 14.65dBd @ 698-806MHz 17.5dBi / 15.35dBd @ 824-894MHz
17.0dBi / 14.85dBd @ 1710-1755MHz 17.3dBi / 15.15dBd @ 1850-1900MHz 17.5dBi / 15.35dBd @ 2110-2155MHz
Beamwidth
Horizontal 68˚ @ 698-806MHz 63˚ @ 824-894MHz
67˚ @ 1710-1755MHz 65˚ @ 1850-1900MHz 62˚ @ 2110-2155MHz
Vertical 9.2˚ @ 698-806MHz 8.0˚ @ 824-894MHz
7.3˚ @ 1710-1755MHz 7.0˚ @ 1850-1900MHz 6.7˚ @ 2110-2155MHz
VSWR ≤1.5:1
Front-to-Back Ratio ≥27 dB
Electrical Downtilt Range 2˚ ~ 16˚ 0˚ ~ 10˚
Isolation Between Ports ≥30 dB
Isolation Between Ports of Different Frequency Elements ≥35 dB
Cross Pole Discrimination 10.0 dB @ ±60˚ 15.0 dBi @ 0˚
First Upper Side Lobe Suppression 16dB
Side Lobe Suppression > 16 dB @ 0-6˚ Tilt > 18 dB @ 7-12˚ Tilt
(Up to 10˚ from Boresight)
> 16 dB @ 0-6˚ Tilt > 18 dB @ 7-10˚ Tilt
(Up to 10˚ from Boresight)
Passive Intermodulation ≤ -150 dBc @ 2x20w
Input Maximum CW Power 500 W 300 W
Environmental Compliance IP65 for Radome
IP67 for Connectors
RET Motor Configuration Field Replaceable RET Electronic Control Module /
RET Motor is internal to antenna & not field replaceable
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Mechanical Specification
Dimension (W×D×H) 11.8×6.0×96 inches
Weight (Without clamp) 59.5 lbs (27.0 kg)
Connector
4 x 7/16 DIN(F), Long Neck
Max Wind Speed 150 mph
Wind Load (@150 mph) 2521 N
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-17-65-00T-RET(8’ 65˚ Dual Broadband Antenna)
Horizontal Pattern Vertical Pattern (Downtilt 2˚)
700MHz band Pattern
Horizontal Pattern Vertical Pattern (Downtilt 0˚)
AWS band Pattern
700MHz
+45˚
700MHz
45˚
RET
AWS
+45˚
AWS
45˚
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-17-65-00T-RET(8’ 65˚ Dual Broadband Antenna) Antenna Drawings and Installation Diagram
MOUNT POLE
(50 ~ 80mm OD.)Ø1.97 ~ 3.15inch OD. PART NAME
23
1No.
54 Spring Washer, M10
FIXED CLAMP
Hex. Nut, M10
Plain Washer, M10Hex. Cap Bolt, M10
4Q'TY
4
84
4
240kgf.cm
17mm Spanner
Recommending Torque
208lbf.inch
543
21
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-13-85-00T-RET(4’ 85˚ Dual Bandband Antenna) Dual Band Electrical DownTilt Antenna
698 ~ 894MHz, X-pol., H85˚ / V17˚
1710 ~ 2170MHz, X-pol., H85 / V8.0˚
Electrical Specification Frequency Range 698~894MHz 1710~2170MHz
Impedance 50Ω
Polarization Dual, Slant ±45˚
Gain 12.2dBi / 10.05dBd @ 698-806MHz
13.0dBi / 10.8dBd @ 824-894MHz
15.0dBi / 12.85dBd @1710-1755MHz 15.3dBi / 13.15dBd @1850-1900MHz
15.5dBi / 13.35dBd @2110-2155MHz
Beamwidth
Horizontal 85˚ @ 698-806MHz
80˚ @ 824-894MHz
87˚ @ 1710-1755MHz 85˚ @ 1850-1900MHz
82˚ @ 2110-2155MHz
Vertical 18.2˚ @ 698-806MHz
17˚ @ 824-894MHz
8.5˚ @ 1710-1755MHz 8.2˚ @ 1850-1900MHz
7.8˚ @ 2110-2155MHz
VSWR ≤1.5:1
Front-to-Back Ratio ≥25 dB
Electrical Downtilt Range 2˚ ~ 16˚ 0˚ ~ 10˚
Isolation Between Ports ≥30 dB
Isolation Between Ports of Different Frequency Elements ≥35 dB
Cross Pole Discrimination 10.0 dB @ ±60˚ / 15.0 dB @0˚
First Upper Side Lobe Suppression 16dB
Side Lobe Suppression
> 16 dB @ 0-6˚ Tilt
> 18 dB @ 7-12˚ Tilt
(Up to 15˚ from Boresight)
> 16 dB @ 0-6˚ Tilt
> 18 dB @ 7-10˚ Tilt
(Up to 15˚ from Boresight)
Passive Intermodulation ≤ -150 dBc @ 2x20w
Input Maximum CW Power 500 W 300 W
Environmental Compliance IP65 for Radome
IP67 for Connectors
RET Motor Configuration Field Replaceable RET Electronic Control Module /
RET Motor is internal to antenna & not field replaceable
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Mechanical Specification
Dimension (W×D×H) 11.8×6.0×48 inches
Weight (Without clamp) 36.4 lbs (16.5 kg)
Connector 4 x 7/16 DIN(F), Long Neck
Max Wind Speed 150 mph
Wind Load (@150 mph) 1260 N
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-13-85-00T-RET(4’ 85˚ Dual Broadband Antenna)
Horizontal Pattern Vertical Pattern (Downtilt 2˚)
700MHz band Pattern
Horizontal Pattern Vertical Pattern (Downtilt 0˚)
AWS band Pattern
700MHz
+45˚
700MHz
45˚
RET
AWS
+45˚
AWS
45˚
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-13-85-00T-RET (4’ 85˚ Dual Broadband Antenna) Antenna Drawings and Installation Diagram
MOUNT POLE
(50 ~ 80mm OD.)Ø1.97 ~ 3.15inch OD. PART NAME
23
1No.
54 Spring Washer, M10
FIXED CLAMP
Hex. Nut, M10
Plain Washer, M10Hex. Cap Bolt, M10
4Q'TY
4
84
4
240kgf.cm
17mm Spanner
Recommending Torque
208lbf.inch
543
21
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-15-85-00T-RET(6’ 85˚ Dual Broadband Antenna) Dual Band Electrical DownTilt Antenna
698 ~ 894MHz, X-pol., H85˚ / V12˚
1710 ~ 2170MHz, X-pol., H85˚ / V5.0˚
Electrical Specification Frequency Range 698~894MHz 1710~2170MHz
Impedance 50Ω
Polarization Dual, Slant ±45˚
Gain 13.7dBi / 11.55dBd @ 698-806MHz 14.5dBi / 12.35dBd @ 824-894MHz
16.0dBi / 13.85dBd @ 1710-1755MHz 16.3dBi / 14.15dBd @ 1850-1900MHz 16.5dBi / 14.35dBd @ 2110-2155MHz
Beamwidth
Horizontal 85˚ @ 698-806MHz 80˚ @ 824-894MHz
87˚ @ 1710-1755MHz 85˚ @ 1850-1900MHz 82˚ @ 2110-2155MHz
Vertical 13.2˚ @ 698-806MHz 12.0˚ @ 824-894MHz
5.5˚ @ 1710-1755MHz 5.2˚ @ 1850-1900MHz 4.8˚ @ 2110-2155MHz
VSWR ≤1.5:1
Front-to-Back Ratio ≥25 dB
Electrical Downtilt Range 2˚ ~ 16˚ 0˚ ~ 10˚
Isolation Between Ports ≥30 dB
Isolation Between Ports of Different Frequency Elements ≥35 dB
Cross Pole Discrimination© 10.0 dB @ ±60˚ / 15.0 dB @0˚
First Upper Side Lobe Suppression 16dB
Side Lobe Suppression
> 16 dB @ 0-6˚ Tilt
>18 dB @ 7-12˚ Tilt
(Up to 10˚ from Boresight)
> 16 dB @ 0-6˚ Tilt
>18 dB @ 7-10˚ Tilt
(Up to 10˚ from Boresight)
Passive Intermodulation ≤ -150 dBc @ 2x20w
Input Maximum CW Power 500 W 300 W
Environmental Compliance IP65 for Radome
IP67 for Connectors
RET Motor Configuration Field Replaceable RET Electronic Control Module /
RET Motor is internal to antenna & not field replaceable
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Mechanical Specification
Dimension (W×D×H) 11.8×6.0×72 inches
Weight (Without clamp) 48.5 lbs (22.0 kg)
Connector 4 x 7/16 DIN(F), Long Neck
Max Wind Speed 150 mph
Wind Load (@150 mph) 1891 N
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-15-85-00T-RET(6’ 85˚ Dual Broadband Antenna)
Horizontal Pattern Vertical Pattern (Downtilt 2˚)
700MHz band Pattern
Horizontal Pattern Vertical Pattern (Downtilt 0˚)
AWS band Pattern
700MHz
+45˚
700MHz
45˚
RET
AWS
+45˚
AWS
45˚
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-15-85-00T-RET (6’ 85˚ Dual Broadband Antenna) Antenna Drawings and Installation Diagram
MOUNT POLE
(50 ~ 80mm OD.)Ø1.97 ~ 3.15inch OD. PART NAME
23
1No.
54 Spring Washer, M10
FIXED CLAMP
Hex. Nut, M10
Plain Washer, M10Hex. Cap Bolt, M10
4Q'TY
4
84
4
240kgf.cm
17mm Spanner
Recommending Torque
208lbf.inch
543
21
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-16-85-00T-RET (8’ 85˚ Dual Broadband Antenna) Dual Band Electrical DownTilt Antenna
698 ~ 894MHz, X-pol., H85˚ / V8.0˚
1710 ~ 2170MHz, X-pol., H85˚ / V5.0˚
Electrical Specification Frequency Range 698~894MHz 1710~2170MHz
Impedance 50Ω
Polarization Dual, Slant ±45˚
Gain 14.7dBi / 12.55dBd @ 698-806MHz
15.5dBi / 13.35dBd @ 824-894MHz
16.0dBi / 13.85dBd @ 1710-1755MHz 16.3dBi / 14.15dBd @ 1850-1900MHz
16.5dBi / 14.35dBd @ 2110-2155MHz
Beamwidth
Horizontal
85˚ @ 698-806MHz
80˚ @ 824-894MHz
87˚ @ 1710-1755MHz 85˚ @ 1850-1900MHz
82˚ @ 2110-2155MHz
Vertical
9.2˚ @ 698-806MHz
8.0˚ @ 824-894MHz
5.5˚ @ 1710-1755MHz 5.2˚ @ 1850-1900MHz
4.8˚ @ 2110-2155MHz
VSWR ≤1.5:1
Front-to-Back Ratio ≥25 dB
Electrical Downtilt Range 2˚ ~ 16˚ 0˚ ~ 10˚
Isolation Between Ports ≥30 dB
Isolation Between Ports of Different Frequency Elements ≥35 dB
Cross Pole Discrimination 10.0 dB @ ±60˚ / 15.0 dB @0˚
First Upper Side Lobe Suppression 16dB
Side Lobe Suppression
> 16 dB @ 0-6˚ Tilt
>18 dB @ 7-12˚ Tilt
(Up to 10˚ from Boresight)
> 16 dB @ 0-6˚ Tilt
>18 dB @ 7-10˚ Tilt
(Up to 10˚ from Boresight)
Passive Intermodulation ≤ -150 dBc @ 2x20w
Input Maximum CW Power 500 W 300 W
Environmental Compliance IP65 for Radome / IP67 for Connectors
RET Motor Configuration Field Replaceable RET Electronic Control Module /
RET Motor is internal to antenna & not field replaceable
Compliant with AISG 1.1 and 2.0 AISG 1.1 and 2.0
Dimension (W×D×H) 11.8×6.0×96 inches
Weight (Without clamp) 59.5 lbs (27.0 kg)
Connector 4 x 7/16 DIN(F), Long Neck
Max Wind Speed 150 mph
Wind Load (@150 mph) 2521 N
Mechanical Specification
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-16-85-00T-RET (8’ 85˚ Dual Broadband Antenna)
Horizontal Pattern Vertical Pattern (Downtilt 2˚)
700MHz band Pattern
Horizontal Pattern Vertical Pattern (Downtilt 0˚)
AWS band Pattern
700MHz
+45˚
700MHz
45˚
RET
AWS
+45˚
AWS
45˚
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-CD-16-85-00T-RET (8’ 85˚ Dual Broadband Antenna) Antenna Drawings and Installation Diagram
MOUNT POLE
(50 ~ 80mm OD.)Ø1.97 ~ 3.15inch OD. PART NAME
23
1No.
54 Spring Washer, M10
FIXED CLAMP
Hex. Nut, M10
Plain Washer, M10Hex. Cap Bolt, M10
4Q'TY
4
84
4
240kgf.cm
17mm Spanner
Recommending Torque
208lbf.inch
543
21
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-V-CW-14-65-00T Electrical DownTilt Antenna
698 ~ 894MHz, V-pol., H65˚ / V15˚
Electrical Specification Frequency Range 698~894MHz
Gain 14.1 dBi / 12.0dBd
Beamwidth Horizontal 65˚
Vertical 15˚
Impedance 50Ω
VSWR ≤1.4:1
Polarization Vertical
Front-to-Back Ratio ≥30 dB
Adjustable Downtilt Range 0˚ ~ 10˚
Passive Intermodulation ≤ -150 dBc
Input Maximum CW Power 500 W
Control Interface Knob Type
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
Vertical Pattern(Downtilt 10˚)
Dimension(W×D×H) 12.6×5.9×54inches
Weight (Without clamp) 12.0 kg (26.45 lb)
Connector 2 x 7/16 DIN(F)
Max Wind Speed 60m/s
Mechanical Specifications
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-WM-17-65-00T
Electrical DownTilt Antenna
2496 ~ 2690MHz, X-pol., H65˚ / V7˚
Electrical Specification Frequency Range 2496~2690MHz
Gain 17.5 dBi
Beamwidth Horizontal 65˚
Vertical 7˚
Impedance 50Ω
VSWR ≤1.35:1(Downtilt 0˚ ~ 10˚)
Polarization Dual, Slant ±45˚
Upper 1st Sidelobe Suppression ≥18 dB (@downtilt 0˚)
Front-to-Back Ratio ≥30 dB
Adjustable Downtilt Range 0˚ ~ 10˚
Port-to-port Isolation ≥25 dB
Passive Intermodulation, IM3 ≤ -153 dBc
Input Maximum CW Power 300 W
Control Interface AISG (Version 2.0)
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
Mechanical Specification
Vertical
Vertical Pattern(Downtilt 10˚)
Dimension
Antenna (Without clamp)
6.54×2.6×48.00 inch
RET 2.34×1.18×7.73 inch
Weight
Antenna (Without clamp)
14.2 lbs
RET 1.2 lbs
Connector 2 x 7/16 Din(F)
Max Wind Speed 150mph
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-WM-17-65-00T
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-WM-17-65-00T-FP Electrical DownTilt Antenna
2496 ~ 2690MHz, X-pol., H65˚ / V7˚
Electrical Specification Frequency Range 2496~2690MHz
Gain 17.5 dBi
Beamwidth Horizontal 65˚
Vertical 7˚
Impedance 50Ω
VSWR ≤1.35:1(Downtilt 0˚ ~ 10˚)
Polarization Dual, Slant ±45˚
Upper 1st Sidelobe Suppression ≥18 dB (@downtilt 0˚)
Front-to-Back Ratio ≥30 dB
Adjustable Downtilt Range 0˚ ~ 10˚
Port-to-port Isolation ≥25 dB
Passive Intermodulation, IM3 ≤ -153 dBc
Input Maximum CW Power 300 W
Control Interface AISG (Version 2.0)
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
Mechanical Specification
Vertical Pattern(Downtilt 10˚)
Dimension Antenna
(Without clamp) 6.54×2.6×48.00 inch
RET 2.34×1.18×7.73 inch
Weight Antenna
(Without clamp) 14.2lbs X 3 (42.6 lbs)
RET 1.2 lbs X 3 (3.6 lbs)
Connector 2 x 7/16 Din(F)
Max Wind Speed 150mph
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AM-X-WM-17-65-00T-FP Antenna Drawings and Installation Diagram
2
3
4
1
CLAMPFLAG POLE
6Antenna Bracket223 Sector Clamp
Mounting Support Clamp
3Q'TYPart Name
23
1
4
No.EDTA with RET
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AQ-X-WM-18-65-00T-RET
Electrical DownTilt Quad-pole Antenna
2496 ~ 2690MHz, XX-pol., H65˚ / V6.5 ˚
Electrical Specification of Antenna
Specifications are subject to change.
M
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
Vertical Pattern(Downtilt 10˚)
Frequency Range 2496~2690 MHz
Gain 4×18.0dBi
Beamwidth Horizontal 65˚
Vertical 6.5˚
Impedance 50Ω
VSWR ≤1.4:1
Polarization Qual, Slant ±45˚
Upper 1st Sidelobe Suppression ≥18 dB up to15 degrees above horizon
Front-to-Back Ratio ≥27 dB
Adjustable Electrical Downtilt Range 0˚ ~ 10˚
Tracking < 2.5dB (±60˚ sector edges)
Cross-pol ratio >15dB (On boresight),
>10dB (±60˚ sector edges)
Null Fill >-1dBi down to 12degrees below horizon
Port to Port Isolation ≥30 dB
Passive Intermodulation, IM3 ≤ -153 dBc
Input Maximum CW Power 250 W
Control Interface AISG 2.0
Dimension(W×D×H) 10×3.54×48inches
Weight (Without clamp) 13.5 kg
Connector 4 x 7/16 Din(F)/Bottom
Max Wind Speed 135mph (60m/s)
Mechanical Specification
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
HB-X-WM-17-65-00T Electrical Down Tilt and Azimuth Steering Antenna
2496 ~ 2690MHz, X-pol., H65˚ / V7˚
Electrical Specification Frequency Range 2496~2690MHz
Gain 17.5 dBi
Beamwidth Horizontal 65˚
Vertical 7˚
Impedance 50Ω
VSWR ≤1.35:1(Downtilt 0˚ ~ 10˚)
Polarization Dual, Slant ±45˚
Upper 1st Sidelobe Suppression ≥18 dB (@downtilt 0˚)
Front-to-Back Ratio ≥30 dB
Adjustable Downtilt Range 0˚ ~ 10˚
Horizontal Beam Steering -30˚ ~ +30˚
Port-to-port Isolation ≥25 dB
Passive Intermodulation, IM3 ≤ -153 dBc
Input Maximum CW Power 300 W
Control Interface AISG (Version 2.0)
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
Mechanical Specification
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
Vertical Pattern(Downtilt 10˚)
Dimension Antenna
(Without clamp) 7.32×48.00 inch
RET 2.05×1.78×6.34 inch
Weight Antenna
(Without clamp) 30.0 lbs
RET 1.4 lbs
Connector 2 x 7/16 Din(F)
Max Wind Speed 150mph
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
HB-X-WM-17-65-00T Dual Phase Electrical Down Tilt & Azimuth Steering
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
HB-X-WM-14-65-00T Hybrid 2-way Antenna-Electrical DownTilt & Steering
2496 ~ 2690MHz, X-pol., H65˚ / V14˚
Electrical Specification
Frequency Range 2496~2690MHz
Gain 14.0 dBi
Beamwidth Horizontal 65˚
Vertical 14˚
Impedance 50Ω
VSWR ≤1.35:1
Polarization Dual, Slant ±45˚
Upper 1st Sidelobe Suppression ≥18 dB (@downtilt 0˚)
Front-to-Back Ratio ≥30 dB
Adjustable Downtilt Range 0˚ ~ 10˚
Horizontal Beam Steering -30˚ ~ +30˚
Port-to-port Isolation ≥25 dB
Passive Intermodulation, IM3 ≤ -153 dBc
Input Maximum CW Power 300 W
Control Interface AISG
Horizontal Pattern Vertical Pattern(Downtilt 0˚) Mechanical Specification
Vertical Pattern(Downtilt 10˚)
Dimension Antenna
(Without clamp) Φ7.32×24.00 inch
Weight Antenna (Without clamp) 12.3 lbs
Connector 2 x 7/16 Din(M)
Max Wind Speed 150mph
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
HB-X-WM-14-65-00T Hybrid 2-way Antenna-Electrical DownTilt & Steering Antenna Drawings and Installation Diagram
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AQ-X-WM-18-65-00T-RET Electrical Downtilt Quad Pol. Antenna
2496 ~ 2690MHz, XX-pol., H65˚ / V6.5 ˚
Electrical Specification
Specifications are subject to change.
Mechanical Specification
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
Vertical Pattern(Downtilt 10˚)
Frequency Range 2496~2690 MHz
Gain 4×18.0dBi
Beamwidth Horizontal 65˚
Vertical 6.5˚
Impedance 50Ω
VSWR ≤1.4:1
Polarization Qual, Slant ±45˚
Upper 1st Sidelobe Suppression ≥18 dB up to15 degrees above horizon
Front-to-Back Ratio ≥30 dB
Adjustable Electrical Downtilt Range 0˚ ~ 10˚
Tracking < 2.5dB (±60˚ sector edges)
Cross-pol ratio >15dB (On boresight),
>10dB (±60˚ sector edges)
Null Fill >-1dBi down to 12degrees below horizon
Port to Port Isolation ≥30 dB
Passive Intermodulation, IM3 ≤ -150 dBc
Input Maximum CW Power 250 W
Control Interface AISG 2.0
Dimension(W×D×H) 10.0×3.54x48inches
Weight (Without clamp) 13.5 kg
Connector 4 x 7/16 Din(F)/Bottom
Max Wind Speed 135mph (60m/s)
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AQ-X-WM-16-90-00T-RET
Electrical Downtilt Quad Pol. Antenna
2496 ~ 2690MHz, XX-pol., H90˚ / V6.5 ˚
Electrical Specification
Specifications are subject to change.
Mechanical Specification
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
Vertical Pattern(Downtilt 10˚)
Frequency Range 2496~2690 MHz
Gain 4×16.0dBi
Beamwidth Horizontal 90˚
Vertical 6.5˚
Impedance 50Ω
VSWR ≤1.4:1
Polarization Qual, Slant ±45˚
Upper 1st Sidelobe Suppression ≥18 dB up to15 degrees above horizon
Front-to-Back Ratio ≥25 dB
Adjustable Electrical Downtilt Range 0˚ ~ 10˚
Tracking < 2.5dB (±60˚ sector edges)
Cross-pol ratio >15dB (On boresight),
>10dB (±60˚ sector edges)
Null Fill >-1dBi down to 12degrees below horizon
Port to Port Isolation ≥30 dB
Passive Intermodulation, IM3 ≤ -153 dBc
Input Maximum CW Power 250 W
Control Interface AISG 2.0
Dimension(W×D×H) 10.0×3.54x48inches
Weight (Without clamp) 13.5 kg
Connector 4 x 7/16 Din(F)/Bottom
Max Wind Speed 135mph (60m/s)
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
HQ-X-WM-17-65-00T-RET Hybrid 2 way Quad Pol. Antenna Electrical Downtilt & Steering
2496 ~ 2690MHz, XX-pol., H90˚ / V6.5 ˚
Electrical Specification
Specifications are subject to change.
Mechanical Specification
Horizontal Pattern Vertical Pattern(Downtilt 0˚)
Horizontal Beam steering Vertical Pattern(Downtilt 10˚)
Frequency Range 2496~2690 MHz
Gain 4×17.5dBi
Beamwidth Horizontal 65˚
Vertical 6.5˚
Impedance 50Ω
VSWR ≤1.43:1
Polarization Qual, Slant ±45˚
Upper 1st Sidelobe Suppression ≥18 dB up to15 degrees above horizon
Front-to-Back Ratio ≥27 dB
Adjustable Electrical Downtilt Range 0˚ ~ 10˚
Horizontal Beam Steering -30˚ ~ +30˚
Tracking < 2.5dB (±60˚ sector edges)
Cross-pol ratio >15dB (On boresight),
>10dB (±60˚ sector edges)
Null Fill >-1dBi down to 12degrees below horizon
Port to Port Isolation ≥30 dB
Passive Intermodulation, IM3 ≤ -150 dBc
Input Maximum CW Power 250 W
Control Interface AISG 2.0
Dimension(W×D×H) Φ10.0×48inches
Weight (Without clamp) 16.0 kg
Connector 4 x 7/16 Din(F)/Bottom
Max Wind Speed 135mph (60m/s)
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
HQ-X-WM-16-90-00T-RET
Hybrid 2 way Quad Pol. Antenna Electrical Downtilt & Steering
2496 ~ 2690MHz, XX-pol., H90˚ / V6.5 ˚ Electrical Specification
Specifications are subject to change.
Mechanical Specification
Frequency Range 2496~2690 MHz
Gain 4×16.0dBi
Beamwidth Horizontal 90˚
Vertical 6.5˚
Impedance 50Ω
VSWR ≤1.43:1
Polarization Qual, Slant ±45˚
Upper 1st Sidelobe Suppression ≥18 dB up to15 degrees above horizon
Front-to-Back Ratio ≥25 dB
Adjustable Electrical Downtilt Range 0˚ ~ 10˚
Horizontal Beam Steering -30˚ ~ +30˚
Tracking < 2.5dB (±60˚ sector edges)
Cross-pol ratio >15dB (On boresight),
>10dB (±60˚ sector edges)
Null Fill >-1dBi down to 12degrees below horizon
Port to Port Isolation ≥30 dB
Passive Intermodulation, IM3 ≤ -153 dBc
Input Maximum CW Power 250 W
Control Interface AISG 2.0
Dimension(W×D×H) Φ10.0×48inches
Weight (Without clamp) 16.0 kg
Connector 4 x 7/16 Din(F)/Bottom
Max Wind Speed 135mph (60m/s)
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
TMA Products
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Parameter Specification
Electrical Specification Uplink
Frequency Range 1710 ~ 1755 MHz (45MHz)
Gain 12 ±1 dB
Return Loss ≥18 dB
Noise Figure 1.1dB Typical, Mid Band
1.5dB Typical, Full Band
OIP3 +24 dBm. Typical
Tx band Rejection >80 dB
Group Delay Max. <40ns
Group Delay Variation <8ns (@5Mhz)
Bypass Insertion Loss <1.6dB Typical
Bypass Return Loss >14dB
Supply voltage +10V ~ +30V
Power Consumption 7.5W Max.
Inrush Current Max. 1.0A Electrical Specification Downlink
Frequency Range 2110 ~2155 (45Mhz)
Insertion Loss 0.3 dB, max.
Return Loss ≥18dB
Rx Band Rejection >50dB
Group Delay Max. <15ns
Group Delay Variation <8ns (@5MHz)
Average Operating Power 200Watts
Power handling Survival 4.0 KW
3rd order PIM in Rx Band (@ BTS 2*43dBm) -117 dBm Max.
Impedance 50 ohms Mechanical Specification
Weight 3.6 Kg Typical
Dimension 313.6mm x 146.0mm x 89.9mm W/BKT
Color Gray Connector Type (@ ANT) 7-16 DIN female
Connector Type (@ BTS) 7-16 DIN female
Mounting Wall, Pole
RBS 1, RBS 2 TMA DC Power & OOK
RET Port RET DC Power & RS-485
RET Specification AISG Version AISG 1.1/2.0
AISG Connector AISG Compliant, IP67
AWS Twin TMA (AISG)
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Parameter Specification
Environmental Specification
Temperature range -40°C to _ 65°C
Humidity 20-100
Air Pressure, kpa 86 to 106
Solar radiation, W/m2 1120
Lightning Protection 20KA, 8/20us
EMC and safety approvals EN 301 489-8 (2002-08)
Weather protection IP67
Wind load@115km/h 35N
Wind Speed 55ml / s
AWS Twin TMA (AISG)
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
A n te n n a
R F Feed e r
R F Feed e r
T IC U(A IS G P rim a ry S ta t io n )
B TS
R G 3 16 C ab le1 . A ISG [O O K ]2 . D C P o w e r
R ET
R F Feed e r
A IS G C ab le1 . A ISG [R S485]2 . D C P o w e r
TM A
M a in D iv .
O O K B ias- T
R F Feed e r1 . R F2 . A ISG [O O K ]3 . D C P o w e r
O O K B ias- T
R F Feed e r1 . R F2 . A ISG [O O K ]3 . D C P o w e r
R F Feede r
R G 31 6 C ab le1 . A ISG [O O K ]2 . D C P o w e r
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
[Drawing]
RB
S 1
(TM
A D
C)
RB
S 2
(AN
T D
C)
(AN
T D
C)
AN
T 2
AN
T 1
AWS Twin TMA
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Parameter Specification
Electrical Specification Uplink
Frequency Range 1850 ~ 1910 MHz (60MHz)
Gain 12 ±1 dB
Ripple 1.6 dB max.
Return Loss ≥ 18dB
Noise Figure 2.0 dB Max.
OIP3 +25 dBm. Max.
Total Group Delay < 160 ns
Group Delay variation < 100 ns
Group Delay distortion < 10 ns (any 240 KHz)
Bypass Insertion Loss < 2.95dB max.
Bypass Return Loss > 14dB
Supply voltage [V] +10 ~ +30
Power Consumption [W] 7.5 Max.
Inrush Current [A] Max. 1.0 Electrical Specification Downlink
Frequency Range 1930 ~ 1990 MHz (60 MHz)
Insertion Loss 0.6 dB max.
Ripple 0.5 dB max.
Return Loss ≥ 18dB
Total Group Delay < 50ns
Group Delay variation < 30ns
Average Operating Power 250 watts
Power Handling Survival 5.0 KW
3rd Order PIM in Rx band (@BTS 2*42dm) -115 dBm max
Impedance 50 ohms
Mechanical
Specification
Weight 6.2 Kg
Dimension (mm) 376.6 x 220.0 x 88.5 W/BKT
Color MUNSEL 6.0
Connector type (@ ANT) 7-16 DIN Female
Connector type (@ BTS) 7-16 DIN Female
Mounting Wall, Pole
RBS 1, RBS 2 TMA DC Power & OOK
RET Port RET DC Power & RS-485
RET Specification AISG Version AISG 1.1/2.0
AISG Connector AISG Compliant, IP67
PCS TMA (AISG)
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
A n t e n n a
R F F e e d e r
R F F e e d e r
T I C U( A I S G P r i m a r y S t a t i o n )
B T S
R G 3 1 6 C a b l e1 . A I S G [ O O K ]2 . D C P o w e r
R E T
R F F e e d e r
A I S G C a b l e1 . A I S G [ R S 4 8 5 ]2 . D C P o w e r
T M A
M a i n D i v .
O O K B i a s - T
R F F e e d e r1 . R F2 . A I S G [ O O K ]3 . D C P o w e r
O O K B i a s - T
R F F e e d e r1 . R F2 . A I S G [ O O K ]3 . D C P o w e r
R F F e e d e r
R G 3 1 6 C a b l e1 . A I S G [ O O K ]2 . D C P o w e r
Parameter Specification
Environmental Specification
Temperature Range -40°C to +65°C
Humidity 20 ~ 100
Thermal Shock IEC 68 2-14, Test Na
Altitude (ft) 11,000
Air Pressure (kpa) 86 to 106
Solar Radiation [W/m^2] 1120
Salt fog IEC 68-2-11
Lightning Protection ±20KA, 8/20us. ALL port
EMC and safety approvals EN 301 489-8 (2002-08)
-RE, CE, ESD, EFT Weather protection IP66
Sand and Dust IEC 68-2-68 Wind Load @ 115 [km/h] 50
Wind Speed [km.h] >200
PCS TMA (AISG)
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
[Drawing]
AN
T 1
RB
S 1
(TM
A D
C)
AN
T 2
(AN
T D
C)
(AN
T D
C)
RB
S 2
PCS TMA (AISG)
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Parameter Proposal Specification
AWS Up-Link Frequency Range 1710 ~ 1770MHz
TX Band Rejection, dB 80dBc. min
Gain 13dB±1dB
Filter Rejection @ 1700MHz 25dBc. min
Filter Rejection @ 1800MHz 25dBc. min
Noise Figure, dB @ -40˚C ~ +65˚C 1.45dB. max (@1MHz Avg.)
Return Loss Normal 18.0dB. min
Bypass 15.0dB. min
Bypass Loss 1.60dB. max
Input IP3, dBm @ -40˚C ~ +65˚C +10dBm. min
AWS Down-Link
Frequency Range 2110 ~ 2170MHz
Insertion Loss 0.3 max
Return Loss 18.0dB. min
Maximum Input Power AVG : 500watt, Peak : 5,000watt
PIM @ ANT port 155dBc. min Phase Linearity Variation (over any 180KHz with in Band pass)
5deg. max
Group Delay Variation (over any 180KHz with in Band pass)
25nS. max
Amplitude Variation (over any 180KHz with in Band pass)
0.2dB. max
Environmental
Specifications
DC Input Range +7.0 ~ +30V
DC Current 220mA. max
Power Consumption in Watts 2.0W max
Lightning Protection 2KA (8/20usec)
Operation Temperature -40 ~ +65
IP Rating IP67
Wind Load@ 115 km/h(70 mph)N (lbf) 107 (24)
Maximum wind speed, m/s, (mph) 67, (150)
RET
Specifications
AISG Version 1.1 and 2.0
AISG Connector AISG Compliant, IP67
Mechanical
Specifications
Dimensions 249x87.2x230
Weight 7Kg [15.4 lbs.]
RF Connector 7/16 DIN(Female, Long Neck)
AISG Connector AISG Compliant, IP67
Single Band AWS Twin
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
[Drawing]
BTS 1 RET BTS 2
ANT 2ANT 1
Single Band AWS Twin
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Parameter Proposal Specification
700MHz Bypass (Both Ports)
Frequency Range, MHz 698 ~ 746MHz
Rejection, dB 80dBc. Min
Insertion Loss, dB 0.2 max
Return Loss, dB 18.0dB. min
Maximum Input Power AVG : 500watt, Peak : 5,000watt
PIM @ ANT port 155dBc. min
AWS Up-Link (Both Ports)
Frequency Range 1710 ~ 1770MHz
TX Band Rejection, dB 80dBc. min
Gain 13dB±1dB
Filter Rejection @ 1700MHz 25dBc. min
Filter Rejection @ 1800MHz 25dBc. min
Noise Figure, dB @ -40˚C ~ +65˚C 1.6dB. max
Return Loss Normal 18.0dB. min
Bypass 15.0dB. min
Bypass Loss 1.7dB. max
Input IP3, dBm @ -40˚C ~ +65˚C +10dBm. min
AWS Down-Link
(Both Ports)
Frequency Range 2110 ~ 2170MHz
Insertion Loss 0.3 max
Return Loss 18.0dB. min
Maximum Input Power AVG : 500watt, Peak : 5,000watt
PIM @ ANT port 155dBc. min Phase Linearity Variation
(over any 180KHz with in Band pass) 5deg. max
Group Delay Variation (over any 180KHz with in Band pass)
25nS. max
Amplitude Variation (over any 180KHz with in Band pass)
0.2dB. max
Environmental
Specifications
DC Input Range +7.0 ~ +30V
DC Current 250mA. max
Power Consumption in Watts 3.0W max
Lightning Protection 2KA (8/20usec)
Operation Temperature -40 ~ +65
IP Rating IP67
Wind Load@ 115 km/h(70 mph)N (lbf) 107 (24)
Maximum wind speed, m/s, (mph) 67, (150)
RET
Specifications
AISG Version 1.1 and 2.0
AISG Connector AISG Compliant, IP67
Mechanical Dimensions 334x87x230
AWS Twin Dual 700 Bypass
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Specifications Weight 7.9Kg [17.41 lbs.]
RF Connector 7/16 DIN(Female, Long Neck)
AISG Connector AISG Compliant, IP67
[Drawing]
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Parameter Proposal Specification
700M Up Link RX Frequency Range, MHz 698 ~ 716MHz
TX Band Rejection, dB 80dB. Min
Gain, dB 13dB±1dB Bandpass= 15.5MHz, Roll off begins at 699.25 and 714.75MHz
15.5MHz
Filter Rejection @ 697.8MHz 40dB min
Filter Rejection @ 716.2MHz 40dB min
Noise Figure, dB @ -40˚C ~ +65˚C 2.0dB. max
Return Loss, dB Normal 18.0dB. min
Bypass 15.0dB. min
Bypass loss, dB 2.6dB. max
Input IP3, dBm @ -40˚C ~ +65˚C +10dBm. min
700M Down Link
TX Frequency Range, MHz 728 ~ 746MHz
Insertion Loss, dB 0.55 max
Return Loss, dB 18.0dB. min
Maximum Input Power AVG : 500watt, Peak : 5,000watt
Intermodulation @ antenna ports 155dBc. min Group Delay Variation (over any 180KHz with in Band pass)
50nS. max
AWS Up-Link Frequency Range 1710 ~ 1770MHz
TX Band Rejection, dB 80dBc. min
Gain 13dB±1dB
Filter Rejection @ 1700MHz 25dBc. min
Filter Rejection @ 1800MHz 25dBc. min
Noise Figure, dB @ -40˚C ~ +65˚C 1.45dB. max(@1MHz Avg.)
Return Loss Normal 18.0dB. min
Bypass 15.0dB. min
Bypass Loss 1.60dB. max
Input IP3, dBm @ -40˚C ~ +65˚C +10dBm. min
AWS Down-Link
Frequency Range 2110 ~ 2170MHz
Insertion Loss 0.3 max
Return Loss 18.0dB. min
Maximum Input Power AVG : 500watt, Peak : 5,000watt
PIM @ ANT port 155dBc. min Phase Linearity Variation (over any 180KHz with in Band pass)
5deg. max
Group Delay Variation (over any 180KHz with in Band pass)
25nS. max
Amplitude Variation (over any 180KHz with in Band pass)
0.2dB. max
Dual Band TMA
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Environmental
Specifications
DC Input Range +7.0 ~ +30V
DC Current 220mA. max
Power Consumption in Watts 2.0W max
Lightning Protection 2KA (8/20usec)
Operation Temperature -40 ~ +65
IP Rating IP67
Wind Load@ 115 km/h(70 mph)N (lbf) 107 (24)
Maximum wind speed, m/s, (mph) 67, (150)
RET
Specifications
AISG Version 1.1 and 2.0
AISG Connector AISG Compliant, IP67
Mechanical
Specifications
Dimensions 320x129x332
Weight 13.5Kg [29.76 lbs.]
RF Connector 7/16 DIN(Female, Long Neck)
AISG Connector AISG Compliant, IP67
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
[Drawing]
BTS RET
ANT 1 ANT 2
Dual Band TMA
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Parameter Proposal Specification 700M Bypass Frequency Range 698 ~ 746MHz
Insertion Loss 0.2dB. max Return Loss 18.0dB. min AWS Band Rejection 80.0dB. min Maximum Input Power AVG : 500watt, Peak : 5,000watt PIM @ ANT port 155dBc
AWS Down-Link
Frequency Range 2110 ~ 2170MHz Insertion Loss 0.3 max Return Loss 18.0dB. min Phase Linearity Variation (over any 180KHz with in Band pass)
5deg. max
Group Delay Variation (over any 180KHz with in Band pass)
25nS. max
Amplitude Variation (over any 180KHz with in Band pass)
0.2dB. max
PIM @ ANT port 155dBc. min Maximum Input Power AVG : 500watt, Peak : 5,000watt
AWS Up-Link Frequency Range 1710 ~ 1770MHz Gain 13dB±1dB Bypass Loss 1.60dB. max Return Loss Normal 18.0dB. min
Bypass 15.0dB. min
Noise Figure 1.45dB. max
IIP3 +10dBm. min
Attenuation 2110 ~ 2170MHz 80dBc. min
1700MHz 25dBc. min
1800MHz 25dBc. min
Environmental
Specifications
DC Input Range +7.0 ~ +30V
DC Current 125mA. max
Power Consumption in Watts 1.0W max
Lightning Protection 2KA (8/20usec)
Operation Temperature -40 ~ +65
IP Rating IP67
Wind Load @ 115km/h (Wind Speed) 107N (67m/s)
RET
Specifications
AISG Version 1.1 and 2.0
AISG Connector AISG Compliant, IP67
Mechanical
Specifications
Dimensions 174x87x230
Weight 4.5Kg [9.92 lbs.]
RF Connector 7/16 DIN(Female, Long Neck)
AISG Connector AISG Compliant, IP67
Dual Band TMA with 700MHz Bypass
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
[Drawing]
174.0 87.0
230.0
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Parameter Proposal Specification
700M Up Link RX Frequency Range, MHz 698 ~ 716MHz
TX Band Rejection, dB 80dBc. min
Gain, dB 13dB±1dB Bandpass= 15.5MHz, Roll off begins at 699.25 and 714.75MHz
15.5MHz
Filter Rejection @ 697.8MHz 40dB min
Filter Rejection @ 716.2MHz 40dB min
Noise Figure, dB @ -40˚C ~ +65˚C 2.0dB. max
Return Loss, dB Normal 18.0dB. min
Bypass 15.0dB. min
Bypass loss, dB 2.4dB. max
Input IP3, dBm @ -40˚C ~ +65˚C +10dBm. min
700M Down Link
TX Frequency Range, MHz 728 ~ 746MHz
Insertion Loss, dB 0.55 max
Return Loss, dB 18.0dB. min
Maximum Input Power AVG : 500watt, Peak : 5,000watt
PIM @ ANT port 155dBc. min Phase Linearity Variation (over any 180KHz with in Band pass)
40deg. max
Group Delay Variation (over any 180KHz with in Band pass)
50nS. max
Amplitude Variation (over any 180KHz with in Band pass)
0.3dB. max
Environmental
Specifications
DC Input Range +7.0 ~ +30V
DC Current 250mA. max
Power Consumption in Watts 3.0W max
Lightning Protection 2KA (8/20usec)
Operation Temperature -40 ~ +65
IP Rating IP67
Wind Load@ 115 km/h(70 mph)N (lbf) 107 (24)
Maximum wind speed, m/s, (mph) 67, (150)
RET
Specifications
AISG Version 1.1 and 2.0
AISG Connector AISG Compliant, IP67
Mechanical
Specifications
Dimensions 327x160x382
Weight 17Kg [37.48 lbs.]
RF Connector 7/16 DIN(Female, Long Neck)
AISG Connector AISG Compliant, IP67
Single Band 700 Twin
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
[Drawing]
BTS 2
ANT 2ANT 1
BTS 1 RET
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
1. Electrical Specifications
Parameter Specification Remark
Frequency 2502~2690MHz
Insertion loss 1.0dB(room temperature)
1.1dB(operating temperature) 2502~2690MHz
Bypass loss Same value of Tx Insertion Loss
Return loss(S11,S22) 16dB min
Ripple +/-0.5dB
Handling
Avg 60W 20W/FA, 3FA, OFDMA(10M)
Peak Power 2KW
PIMD 75dBc (@bypass : 70dBc)
43dBm/tone
Out Band spec
Frequency : 2493MHz
Group delay 300ns max.
Attenuation
0.535~2150MHz 80dB min
2486~2493MHz 30dB min
2705~3300MHz 68dB min
3650~6875MHz 60dB min
10.55~23.6GHz 1dB min
Wide Band TMA
Tx (UL) path
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Parameter Specification Remark
Frequency 2502~2690MHz
Gain 12dB ~ 14dB Ref. 13dB
Bypass loss Same value of Tx Insertion Loss
Return loss(S11,S22) 15dB min
Ripple +/-0.75dB
OIP3 +33dBm
Noise Figure 2.0dB(room temperature)
2.2dB(operating temperature) 2502~2690MHz
Attenuation
0.535~2150MHz 80dBc min @ Rx Gain Ref 14dB
2486~2493MHz 30dBc min @ Rx Gain Ref 14dB
2705~3300MHz 68dBc min @ Rx Gain Ref 14dB
3650~6875MHz 60dBc min @ Rx Gain Ref 14dB
10.55~23.6GHz 1dB min
Parameter Specification Remark
RF sync. Det. Operate BTS 0, 1 Envelop detector
DC feeding BTS 0, 1
FSK sync. Det. Operate BTS 0, 1
AISG communication BTS 0, 1
AISG Interface AISG 2.0 2.176MHz OOK
Power Consumption 20W max / 15W type
(+15VDC normal operation) Without RET operation
TDD Sync. Method
(RF is dominant mode operations.
FSK sync. Det. Mode is optional)
RF sync. Detection
Design reference is
Signal BW 10MHz
Frame time 5ms
Symbol 47
CP 1/8
FSK(with AICU to TTLNA)
@provide ref. sync(LVTTL). Is BTS 7.6MHz(DL)/12.3MHz(UL)
Control & Power Part
Rx (UL) path
Wide Band TMA
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Parameter Specification Remark
Operating TDD sync.
Mode selection of TICU
(used by web GUI)
FSK only mode FSK only present
RF only mode RF only present
FSK dominant RF standby mode FSK & RF present
RF dominant FSK standby mode FSK & RF present
Tx(DL) fixed mode Compulsion mode
Rx(UL) fixed mode Compulsion mode
Operating mode & bypass or different mode change functions description
FSK only mode
Sync. Signal check sequence.
FSK0→FSK1
Changed bypass mode
- LNA fail, TDD S/W fail
- Tx energy detected at Rx time
feedback rotation
bypass fixed & alarm.
Note (1)
RF only mode
Sync. Signal check sequence.
RF0 or RF1
Changed bypass mode
- LNA fail, TDD S/W fail
Setting for RF sync. Parameters
feedback rotation
bypass fixed & alarm.
Note (2) with TICU(web GUI)
FSK dominant RF standby
mode
[Manufacture Default Mode]
Sync. Signal check sequence.
FSK0 or FSK1→RF0 or RF1
Changed bypass mode
- LNA fail, TDD S/W fail
- Tx energy detected at Rx time
Setting for RF sync. Parameters
feedback rotation
bypass fixed & alarm.
Note (1)
Note (2) with TICU(web GUI)
RF dominant FSK standby
mode
Sync. Signal check sequence.
RF0 or RF1→FSK0 or FSK1
Changed bypass mode
- LNA fail, TDD S/W fail
- Tx energy detected at Rx time
Setting for RF sync. parameters
feedback rotation
bypass fixed & alarm.
Note (1)
Note (2) with TICU(web GUI)
Tx(DL) fixed mode Compulsion mode of remotely Bypass and the same
Status.
Rx(UL) fixed mode
Compulsion mode of remotely
(If Tx power is detected in Rx fixed
mode, change into bypass Mode)
Operating TDD sync. Mode selection & control
Wide Band TMA
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
< Note > • Tx energy detected at Rx time: FSK sync. Operation only.
(Schottky diode design for) Peak detector using fixed threshold level: TBD; example) 10dBm
• Action for detected over threshold power level is turnaround bypass fixed mode and alarm
(Turnaround bypass fixed mode condition is one time detecting over threshold power)
• Mode recovery is manual remotely re-settable for TICU (using web GUI) • Remotely TTLNA RF sync. mode setting Parameters for TICU.
Parameter Specification
Signal BW 10M
Frame length(time) 5ms
Symbol count
Total 47
DL 28
UL 19
Cycle prefix 1/8
RTG Full time 60us
Advanced offset 47us
TTG Full time 105.7143us
Delayed offset 50us
Wide Band TMA
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Switching Time & range
Environmental Specifications
Mechanical Specifications
Parameter Specification Remark
Size [Inch] 17.2 ×7.32 ×2.84 Without BKT
19.4 ×7.32 ×3.67 With BKT
Weight [kg] 7.3 Without BKT
7.6 With BKT
RF Port type DIN 7/16” Female
AISG Port type AISG complaint connector Female
Parameter Specification Remark
Switching time of RTG, RTG 10us max RTG region is 60us,
TTG region is 105.7143us
BTS provide ref. sync. to TICU
TTLNA switching region
(with switching time)
RTG operating switching time
position & range
TTG operating switching time
position & range
RTG advanced time is (TBD1)us
TTG delayed time is (TBD2)us
Start position (TBD1)us,
range 30us max
Start position (TBD2)us,
range 27us max
Ref. of DL frame start time
Ref. of DL frame end time
TTLNA internal switching time
position offset is
RTG(advanced time)
TTG(delayed time)
47us ± 3us
50us ± 3us
Ref. of DL frame start time
Ref. of DL frame end time
Parameter Specification Remark
Operating Temperature -40F~125F
Storage Temperature -40F~176F / non-destruction
Relative Humidity 5~100%
Lightning Protection 8/20us, 20kA (Ant., BTS port)
8/20us, 5kA (AISG port)
MTBF 7*105hours min
Sealing Class IP65
Wide Band TMA
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
[Mechanical Drawing]
Part Name
14
2
Q'TY1
No.
23
AISG CONNECTORGROUND SCREW
RF Connector (7/16)
2
3
Wide Band TMA
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Parameter Specification
Electrical Specification
Input Voltage (from BTS) ±17[V] ~ ±60[V] , TYP ±24 or ±48[V]
Input Protection and Polarity Automatic polarity agile
External fuse / circuit breaker 3[A]
No. of TMA DC output ports 3 port (SMA Female)
Output voltage to TMA 11.5 ~ 14.5 / TYP 13[V]
Output current, max. per port 800[mA] per DC port
DC output protection Automatic short-circuit protection,
Auto recovery. Common for both ports.
Normal current 200 ± 20 mA per DC port
Output current alarm thresholds
A path LNA fail : 260 ± 20 mA per DC port
B path LNA fai : l320 ± 20 mA per DC port
A + B path LNA fail : 380 ± 20 mA per DC port
Alarm Output port (to BTS)
D_SUB 9PIN Female (pin 1,4: Alarm, pin5: GND)
- Normal : open
- alarm : short((LOW)
Power Consumption MAX 2.4[A]
Mechanical Specification
Size, W x H x D (mm) 482.6 x 44 x 224
Weight 1.1 Kg
Color Pantone Cool Gray
DC input connector DFK-MSTB 2,5/2,GF-5,08
DC output connector SMA Female
Alarm output connector D_SUB 9Pin Female
Debug Port USB A TYPE(RS-232)
PAC input connector SMA Female
PAC output connector
Output voltage LED OK : Green / FAIL : RED
Environmental Specification
Temperature range, full operation -10 to +65
Humidity 5 % to 95 % relative humidity
Ingress protection IP 30
Lightening protection DC output port 1KA, 8/20uS
DC input port 1KA, 8/20uS
EMC and safety approvals EN55022 CLASS A
Power Distributiuon Unit
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
[Mechanical Drawing]
Power Distributiuon Unit
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Filter
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Band Edge Rejection Filter to notch out unwanted singals
• Provides a solution to interference on an”as-needed” bases with extremely sharp rejection
• Triple mode Ceramin DR allows the smallest, lightest and lowest product. • Indoor / Outdoor application
Band Rejection Filter
Product Number K09FT165Z
Pass Band RX Path : 698.3 ~ 715.7MHz
TX Path : 728.3 ~ 745.7MHz
Insertion Loss < 0.25dB
Attenuation
@ 696.8 ~ 697.8MHz
@ 716.2 ~ 717.2MHz
> 20.0dB
VSWR < 1.3
Impedance 50Ω
Intermodulation < -160 dBc.
(@RX Band, With Tx Band 2 * 20 W)
Input Power < 100W
Temperature -30 ~ +65
IP Rating IP66
Weight TBD
Connector *Option(N, SMA Available)
Dimension (W×D×H) 270 × 251 × 150 mm
(excluding mounting brackets)
Techinical Specification
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Migration Step Seletable In-Band Co-Siting Solution • Centralized remote migration with no climbing to Tower • No Downtime during migration and push button frequency reconfiguration • Customizable migration step • Lighter & smaller design by using triple mode ceramic DR • CapEx Saving & additional OpEx saving by Antenna line re-use
Big Bang (Multi Step Combiner) 1850~1990MHz
Product Number K09UN131Z
System in Between CDMA LTE
Pass Band
Tx2 f1 – Tx2 f2
(Note1)
Tx2 f2 + 635KHz
~ 1990MHz
Rx : 1850 ~ 1910MHz
Guard Band width 635kHz
Insertion Loss
< 0.8dB
(1.25MHz Avg.)
Typical 0.65dB
< 0.7dB
(1.4MHz Avg.)
Typical 0.6dB
CDMA to LTE Isolation > 30.0dB
Return Loss > 18dB
Intermodulation < -158 dBc.
(@RX Band, With Tx Band 2 * 20 W)
Input Power < 100W
DC & AISG Path By Pass (path selection available)
Temperature -40 ~ +55
IP Rating IP65
Weight < 9.5 Kg
Connector 7-16 Female
Dimension (W×D×H) 220 ×225 × 189 mm
(excluding mounting brackets)
Techinical Specification
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
In-Band Combiner (with 30Mhz Guard Band in between Pass band)
In-band co-siting for UMTS 2100 with Broad Guard Band
• Indoor & outdoor applications • Surge Protection • 150W high power in each pth • CapEx Saving & additional OpE saving by
Antenna line re-use
Product Number KDXCV06180000
Pass Band 15MHz BW RBS System A in UMTS 2100
15MHz BW RBS System B in UMTS 2100
Insertion Loss In Band : 0.4dB
Band Edge : 0.6dB
Return Loss 19dB
Isolation 40dB
Impedance 50Ω
Intermodulation < -163 dBc.
(@RX Band, With Tx Band 2 * 20 W)
DC path Voltage : 40V, Current : 3A,
DC Resistance : 0.1ohm Max.
Operating Power 150W
Lightning protection Design endurable DC by pass
against Lightning
Temperature -33 ~ +55
IP Rating IP65
Weight (without BKT) 7.0 Kg
Connector 7-16 Female
Dimension (W×D×H) 197x197x100
(excluding mounting brackets)
Techinical Specification
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
In-Band Combiner (with 5Mhz Guard Band in between Pass band)
In-band co-siting for UMTS 2100 with Narrow Guard Band • Indoor & outdoor applications • Surge Protection • 150W high power in each pth • CapEx Saving & additional OpE saving by Antenna
line re-use
Product Number KFTCD00140010
KFTCD00140020
Pass Band 10MHz(15MHz)BW RBS System A
15MHz(10MHz)BW RBS System B
Insertion Loss In Band : 0.7dB
Band Edge : 0.9dB
Return Loss 19dB
Isolation 30dB
Impedance 50Ω
Intermodulation < -163 dBc.
(@RX Band, With Tx Band 2 * 20 W)
DC path Voltage : 40V, Current : 3A,
DC Resistance : 0.1ohm Max.
Operating Power 160W
Lightning protection 8/20us, 20kA
Temperature -33 ~ +55
IP Rating IP65
Weight (without BKT) 10 Kg
Connector 7-16 Female
Dimension (W×D×H) 255x255x110
(excluding mounting brackets)
Techinical Specification
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Co-siting & feeder sharing solution for AWS and PCS Wall or pole mounting, DC by pass between all ports Electrical Specifications
Requirements Specifications
PCS AWS
Frequency Range 1850 – 1990 MHz 1710 – 1755MHz 2110 – 2155MHz
Insertion loss 0.3dB Max. 0.2dB Max.
VSWR 1.25 Max.
Isolation to other ports 50dB Min.
Maximum Input Power 250Watts Max. (PCS, AWS Each)
Passive Intermodulation -160dBc Min. (3rd Order, with TX 2 tone x 20W)
DC DC Pass By-pass between all port (Max. 2500mA)
Lightning Protection 3kA (10/350usec)
Impedance 50Ω
Mechanical & Other Specifications
Requirements Specifications
Dimension (W×H×D) (Excluding mounting brackets) 127 x 220 x 55mm
Weight (Excluding mounting brackets) 2.8 Kg [6.2 lbs]
RF Connector 7/16 DIN Female Long Neck
Operating Temperature -40 to +65
Ingress Protection IP66
Mounting Wall & Pole Mount Available
*Specifications are subject to change.
Dual Band Combiner
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
[Simulation Data]
[Drawing]
Dual Band Combiner
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Co-siting & feeder sharing solution for AWS and 700MHz Wall or pole mounting, DC by pass between all ports
Electrical Specifications
Requirements Specifications
700MHz AWS
Frequency Range 698 – 894 MHz 1710 – 2170MHz
Insertion loss 0.15dB Max.
Return loss 20dB Min.
Isolation to other ports 60dB Min.
Phase Linearity Variation 1degree Max. (over any 180KHz within Band pass)
Group Delay Variation 2ns Max. (over any 180KHz within Band pass)
Maximum Input Power (RMS) 500Watts Max. (700MHz, AWS Each)
Maximum Input Power (PEP) 5000Watts Max. (700MHz, AWS Each)
Passive Intermodulation -155dBc Min. (@RX Band, with TX 2 tone x 20W)
DC
DC Pass Ability to power TMA with bias applied to any port
DC Breakdown 3500Volts
Lightning
Protection 2kA (820usec)
Impedance 50Ω
Mechanical & Other Specifications Requirements Specifications
Dimension (H×D×W) (Excluding mounting brackets) 190 x 135 x 73.5 mm
Weight (Excluding mounting brackets) 2.8 Kg [6.17 lbs.]
RF Connector 7/16 DIN Female Long Neck
Operating Temperature -40 to +65
Ingress Protection IP67
Mounting Wall & Pole Mount Available
Cross Band Coupler
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
[Mechanical Drawing]
AW
S
CO
M
700M
Hz
Cross Band Coupler
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Co-siting & feeder sharing solution for AWS and 700MHz
Wall or pole mounting, DC by pass between all ports Available for sniffer port
Electrical Specifications
Requirements Specifications
700MHz AWS
Frequency Range 698 – 894 MHz 1710 – 2170MHz
Insertion loss 0.15dB Max.
Return loss 20dB Min.
Isolation to other ports 60dB Min.
Phase Linearity Variation 1degree Max. (over any 180KHz within Band pass)
Group Delay Variation 2ns Max. (over any 180KHz within Band pass)
Maximum Input Power (RMS) 500Watts Max. (700MHz, AWS Each)
Maximum Input Power (PEP) 5000Watts Max. (700MHz, AWS Each)
Passive Intermodulation -155dBc Min. (@RX Band, with TX 2 tone x 20W)
DC
DC Pass Ability to power TMA with bias applied to any port
DC Breakdown 3500Volts
Lightning
Protection 2kA (820usec)
Impedance 50Ω
Mechanical & Other Specifications Requirements Specifications
Dimension (H×D×W) (Excluding mounting brackets) 190 x 135 x 73.5 mm
Weight (Excluding mounting brackets) 2.8 Kg [6.17 lbs.]
RF Connector 7/16 DIN Female Long Neck
Sniffer Port N type Female (40dB +-4dB)
Operating Temperature -40 to +65
Ingress Protection IP67
Mounting Wall & Pole Mount Available
Cross Band Coupler with Sniffer Port
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
[Mechanical Drawing]
AW
S70
0MH
z
CO
MM
ON
Cross Band Coupler with Sniffer Port
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
Co-siting & feeder sharing solution for AWS and 700MHz Wall or pole mounting, DC by pass between all ports Available for AISG functionality & sniffer port
Electrical Specifications
Requirements Specifications
700MHz AWS
Frequency Range 698 – 894 MHz 1710 – 2170MHz
Insertion loss 0.15dB Max.
Return loss 20dB Min.
Isolation to other ports 60dB Min.
Phase Linearity Variation 1degree Max. (over any 180KHz within Band pass)
Group Delay Variation 2ns Max. (over any 180KHz within Band pass)
Maximum Input Power (RMS) 500Watts Max. (700MHz, AWS Each)
Maximum Input Power (PEP) 5000Watts Max. (700MHz, AWS Each)
Passive Intermodulation -155dBc Min. (@RX Band, with TX 2 tone x 20W)
DC
DC Pass Ability to power TMA with bias applied to any port
DC Breakdown 3500Volts
Lightning
Protection 2kA (820usec)
Impedance 50Ω
Mechanical & Other Specifications Requirements Specifications
Dimension (H×D×W)(Excluding mounting brackets) 190 x 145 x 73.5 mm
Weight (Excluding mounting brackets) 3.0 Kg [6.61 lbs.]
RF Connector 7/16 DIN Female Long Neck
Sniffer Port N type Female (40dB +-4dB)
RET Port *AISG Compliant (with AISG Functionality only)
Operating Temperature -40 to +65
Ingress Protection IP67
Mounting Wall & Pole Mount Available
*The procedure of the rational interface can be adjusted from AISG1.1 to 3GPP/AISG2.0 and vice versa with Layer 2 / Layer 7 reset commands.
Cross Band Coupler with Sniffer & AISG Port
0
KMW Communications Base Station Antennas For Mobile Communications
www.kmwcomm.com
[Mechanical Drawing]
RET
AW
S70
0MH
zMO
NC
OM
Cross Band Coupler with Sniffer & AISG Port
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Accessories
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Bias-T: KASCT8R80005
Electrical Specification
Frequency Range 1,710~2,170
Insertion Loss (Max.) 0.3
VSWR (BTS, ANT Port: Max.) 1.22:1
Isolation (RF to DC Path: Min.) 50
PIMD (+43dBm 2tone: Min.) 150c
DC Path Resistance 3.3±10%Ω
Bias Voltage -40V DC~+40V DC
Bias Current (Max.) 0.5A
RF Power (Max.) 54m
Residual Voltage (Max.) 500V(Measured after 5)
Surge Arrestor 8/20
±20
Impedance 50Ω
Mechanical Specification
Environmental Specification
Connector
BTS (RF) N(M)
ANT (RF/DC) N(F)
DC SMA(F)
Dimension 80.0×34.0×34.0 (W×D×H)
Weight (Max.) 0.6
Operating Temperature -35~+65
Operating Humidity RH 5~90%
Storage Temperature -40~+80
Storage Humidity RH 5~95%
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Bias-T: KASCT8R80005
[The shape and description of Bias-T KASCT8R80005]
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Bias-T: KASCTR182034
Electrical Specification
Frequency Range 1850~1990
Insertion Loss (Max.) 0.3
Return Loss (BTS, ANT Port: Min.) 28.0
Isolation (RF to DC Path: Min.) 50
PIMD (+43dBm 2tone: Min.) 159c
DC Path Resistance 3.3±10%Ω
Bias Voltage -40V DC~+40V DC
Bias Current (Max.) 0.5A
RF Power (Max.) 54m
Residual Voltage (Max.) 500V(Measured after 5)
Surge Attester 8/20
±20
Impedance 50Ω
Mechanical Specification
Environmental Specification
Connector
BTS(RF) 7/16 DIN(M)
ANT(RF+DC) 7/16 DIN(F)
DC SMA(F)
Dimension() 81.5×34.0×34.0 (W×D×H)
Weight (Max.) 0.6
Operating Temperature -35~+65
Operating Humidity RH 5~90%
Storage Temperature -40~+80
Storage Humidity RH 5~95%
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Bias-T: KASCTR182034
[The shape and description of Bias-T KASCTR182034]
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Bias-T: KASCTR182035
Electrical Specification
Frequency Range 1,850~1990
Insertion Loss (Max.) 0.3
Return Loss (BTS, ANT Port: Min.) 28.0
Isolation (RF to DC Path: Min.) 60.0
PIMD (+43dBm 2tone: Min.) 159c
DC Path Resistance 3.3±10%Ω
Bias Voltage -40V DC~+40V DC
Bias Current (Max.) 0.5A
RF Power (Max.) 54m
Residual Voltage (Max.) 500V(Measured after 5)
Surge Attester 8/20
±20
Impedance 50Ω
Mechanical Specification
Environmental Specification
Connector
BTS(RF) 7/16 DIN(F)
ANT(RF/DC) 7/16 DIN(M)
DC SMA(F)
Dimension() 81.5×34.0×34.0 (W×D×H)
Weight (Max.) 0.6
Operating Temperature -35~+65
Operating Humidity RH 5~90%
Storage Temperature -40~+80
Storage Humidity RH 5~95%
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Bias-T: KASCTR182035
[The shape and description of Bias-T KASCTR182035]
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Bias-T: KASCTR182039
Electrical Specification
Frequency Range 1710~2170
Insertion Loss (Max.) 0.3
VSWR (EQP, ANT Port: Max.) 1.22:1
Isolation (RF to DC Path: Min.) 50
PIMD (+43dBm 2tone: Min.) 159c
DC Path Resistance 3.3±10%Ω
Bias Voltage -40V DC~+40V DC
Bias Current (Max.) 0.5A
RF Power (Max.) 54m
Residual Voltage (Max.) 500V(Measured after 5)
Surge Attester 8/20
±20
Impedance 50Ω
Mechanical Specification
Environmental Specification
Connector
BTS(RF) 7/16 DIN(M)
ANT(RF/DC) 7/16 DIN(F)
DC SMA(F)
Dimension() 81.5×34.0×34.0 (W×D×H)
Weight (Max.) 0.6
Operating Temperature -35~+65
Operating Humidity RH 5~90%
Storage Temperature -40~+80
Storage Humidity RH 5~95%
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Bias-T: KASCTR182039
[The shape and description of Bias-T KASCTR182039]
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Bias-T: KASCTR182040
Electrical Specification
Frequency Range 1,710~2,170
Insertion Loss (Max.) 0.3
Return Loss (BTS, ANT Port: Min.) 20.0
Isolation (RF to DC Path: Min.) 60.0
PIMD (+43dBm 2tone: Min.) 159c
DC Path Resistance 3.3±10%Ω
Bias Voltage -40V DC~+40V DC
Bias Current (Max.) 0.5A
RF Power (Max.) 54m
Residual Voltage (Max.) 500V(Measured after 5)
Surge Attester 8/20
±20
Impedance 50Ω
Mechanical Specification
Environmental Specification
Connector
BTS 7/16 DIN(F)
ANT 7/16 DIN(M)
DC SMA(F)
Dimension() 81.5×34.0×34.0 (W×D×H)
Weight (Max.) 0.6
Operating Temperature -35~+65
Operating Humidity RH 5~90%
Storage Temperature -40~+80
Storage Humidity RH 5~95%
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Bias-T: KASCTR182040
[The shape and description of Bias-T KASCTR182040]
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Conversion BIAS-T(Top) 2496 ~ 2690MHz Block Diagram
Electrical Specification No. Item Specification Remarks
1 Frequency Range 2496 ~ 2690MHz
2 DC Voltage range 10V~30V At BTS Port or RET Port
3 DC Voltage at Non
Feeder Cable Port 0V
When follow the voltage at the other port,
measured at ANT Port.
4 Current Range ≤2.3A BTS Port → RET Port
5 DC Path voltage loss ≤1.2V BTS Port → RET Port When the current is 2.3A, the voltage
loss is ≤1.2V.
6 RF Signal Path Loss 2.0dB, max
@2.176MHz+/-400KHz BTS Port → RET Port
7 RF Signal Path
Return Loss
23dB, min
@2496 ~ 2690MHz BTS Port → ANT Port
8 RF Signal Path Loss 0.2dB, max
@2496 ~ 2690MHz BTS Port → ANT Port
9 RF signal Isolation
≥2.0dB @30~150MHz ANT Port → RET Port and BTS → RET Port.
The open port is terminated with 50oHm during the all
measurement. ≥10.0dB @150~800MHz
≥10.0dB @3000~12750MHz
10 RF Path Power ≤80W BTS Port → ANT Port. PAR=12.0dB, Power 80W and OFDM
signal.
11 Surge Spec. 5 kA(8/20us)
Test Port : RET Port. PAR=12.0dB, Power 80W and OFDM
signal.
20 kA (8/20us) Test Port : ANT Port
RS485/OOK
Modem
ANT
BTS RET
RF signal
OOK signal
RS485 signal
DC signal
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Conversion BIAS-T(Top) 2496 ~ 2690MHz
Environmental Specification
Item Specification Remarks
Operating Temperature -49 ~ +149 °F
Operating Humidity (condensing) 5 ~ 100 %
Storage Temperature -49 ~ +185 °F
Storage Humidity (condensing) 5 ~ 100 %
Weather Protection IP 65
Mechanical Specification
Drawing
No. Parameter Spec Comment
1 RF Connector
BTS Port Din Female
ANT Port Din Male
RET Port RET Connector(SU-20SBR-8S)
2 Size 3.35 * 2.70 * 1.49 inch
3 Weight 1.3 pound
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Conversion BIAS-T(Bottom) 2496 ~ 2690MHz
Block Diagram
Electrical Specification
No. Item Specification Remarks
1 Frequency Range 2496 ~ 2690MHz
2 DC Voltage range 10V~30V At ANT Port or RET Port
3 DC Voltage at Non
Feeder Cable Port 0V
When follow the voltage at the other port,
measured at BTS Port.
4 Current Range ≤2.3A ANT Port → RET Port
5 DC Path voltage loss ≤1.2V ANT Port → RET Port When the current is 2.3A, the voltage
loss is ≤1.2V.
6 RF Signal Path Loss 2.0dB, max
@2.176MHz+/-400KHz ANT Port → RET Port
7 RF Signal Path
Return Loss
23dB, min
@2496 ~ 2690MHz ANT Port → BTS Port
8 RF Signal Path Loss 0.2dB, max
@2496 ~ 2690MHz ANT Port → BTS Port
9 RF signal Isolation
≥2.0dB @30~150MHz BTS Port → RET Port and ANT → RET Port.
The open port is terminated with 50oHm during the all
measurement. ≥10.0dB @150~800MHz
≥10.0dB @3000~12750MHz
10 RF Path Power ≤80W ANT Port → BTS Port. PAR=12.0dB, Power 80W and OFDM
signal.
11 Surge Spec. 5 kA(8/20us)
Test Port : RET Port. PAR=12.0dB, Power 80W and OFDM
signal.
20 kA (8/20us) Test Port : ANT Port
RS485/OO
KModem
BTS
ANT RET
RF signal
OOK signal
RS485 signal
DC signal
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Conversion BIAS-T(Bottom) 2496 ~ 2690MHz
Environmental Specification
Item Specification Remarks
Operating Temperature -49 ~ +149 °F
Operating Humidity (condensing) 5 ~ 100 %
Storage Temperature -49 ~ +185 °F
Storage Humidity (condensing) 5 ~ 100 %
Weather Protection IP 65
Mechanical Specification
Drawing
No. Parameter Spec Comment
1 RF Connector
BTS Port Din Female
ANT Port Din Female
RET Port RET Connector(SU-20SBR-8S)
2 Size 3.35 * 2.70 * 1.49 inch
3 Weight 1.3 pound
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Block Diagram
RS485/OOKMODEM
BTS RET
ANT
RF signal
OOK signal
RS485 signal
DC signal
Electric Specification
No. Item Specification Remarks
1 Frequency Range @698 ~ 2170
2 DC Voltage range 10V~30V At ANT Port or RET Port
3 DC Voltage at Non
Feeder Cable Port
0V When follow the voltage at the other port,
measured at BTS Port.
4 Current Range ≤2.3A ANT Port → RET Port
5 DC Path voltage loss ≤1.2V ANT Port → RET Port When the current is 2.3A, the voltage
loss is ≤1.2V.
6 RF Signal Path Loss 2.0dB, max
@2.176MHz+/-400KHz
ANT Port → RET Port
7 RF Signal Path / R/L 23dB, min@696 ~ 2170 ANT Port → BTS Port
8 RF Signal Path Loss 0.1dB, max
@696 ~ 2170
ANT Port → BTS Port
9 RF signal Isolation ≥2.0dB @30~150MHz BTS Port → RET Port and ANT → RET Port.
The open port is terminated with 50oHm during the all
measurement.
≥10.0dB @150~800MHz
≥10.0dB @3000~12750MHz
10 RF Path Power 750W ANT Port → BTS Port.
11 Surge Spec. ±5 kA(8/20us) Test Port : RET Port
±3 kA (10/350us) Test Port : ANT Port
12 Intermediation(2×20w) -159dBc IM3
Electrical Specification
Smart Bias-T (TOP/F/F) [700MHz/AWS]
P/N: KASCTPR82002
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Environment Specification
Item Specification Remarks
Operating Temperature -40 ~ +65 °C
Operating Humidity (condensation) 5 ~ 95 %
Weather Protection IP 65
Mechanical Specification
Drawing
N O Parameter Spec Comment
1 RF Connector
BTS Port Din Female
ANT Port Din Female
RET Port AISG Circular Female
2 Size (W x D x H) 95.6*67.6*118.3 mm (Including Conn.)
70.0*67.6*41.2 mm (Excluding Conn.)
3 Weight 600 g
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Block Diagram
RS485/OOKMODEM
BTS RET
ANT
RF signal
OOK signal
RS485 signal
DC signal
Electric Specification
No. Item Specification Remarks
1 Frequency Range @698 ~ 2170
2 DC Voltage range 10V~30V At ANT Port or RET Port
3 DC Voltage at Non
Feeder Cable Port
0V When follow the voltage at the other port,
measured at BTS Port.
4 Current Range ≤2.3A ANT Port → RET Port
5 DC Path voltage loss ≤1.2V ANT Port → RET Port When the current is 2.3A, the voltage
loss is ≤1.2V.
6 RF Signal Path Loss 2.0dB, max
@2.176MHz+/-400KHz
ANT Port → RET Port
7 RF Signal Path / R/L 23dB, min@696 ~ 2170 ANT Port → BTS Port
8 RF Signal Path Loss 0.1dB, max
@696 ~ 2170
ANT Port → BTS Port
9 RF signal Isolation ≥2.0dB @30~150MHz BTS Port → RET Port and ANT → RET Port.
The open port is terminated with 50oHm during the all
measurement.
≥10.0dB @150~800MHz
≥10.0dB @3000~12750MHz
10 RF Path Power 750W ANT Port → BTS Port.
11 Surge Spec. ±5 kA(8/20us) Test Port : RET Port
±3 kA (10/350us) Test Port : ANT Port
12 Intermediation(2×20w) -159dBc IM3
Electrical Specification
P/N: KASCTPR82003
Smart Bias-T (BOTTOME/F/F) [700MHz/AWS]
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Environment Specification Item Specification Remarks
Operating Temperature -40 ~ +65 °C
Operating Humidity (condensation) 5 ~ 95 %
Weather Protection IP 65
Mechanical Specification
Drawing
N O Parameter Spec Comment
1 RF Connector
BTS Port Din Female
ANT Port Din Female
RET Port AISG Circular Female
2 Size (W x D x H) 95.6*67.6*118.3 mm (Including Conn.)
70.0*67.6*41.2 mm (Excluding Conn.)
3 Weight 600 g
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Block Diagram
RS485/OOKMODEM
BTS RET
ANT
RF signal
OOK signal
RS485 signal
DC signal
No. Item Specification Remarks
1 Frequency Range @698 ~ 2170
2 DC Voltage range 10V~30V At ANT Port or RET Port
3 DC Voltage at Non
Feeder Cable Port
0V When follow the voltage at the other port,
measured at BTS Port.
4 Current Range ≤2.3A ANT Port → RET Port
5 DC Path voltage loss ≤1.2V ANT Port → RET Port When the current is 2.3A, the voltage
loss is ≤1.2V.
6 RF Signal Path Loss 2.0dB, max
@2.176MHz+/-400KHz
ANT Port → RET Port
7 RF Signal Path / R/L 23dB, min@696 ~ 2170 ANT Port → BTS Port
8 RF Signal Path Loss 0.1dB, max
@696 ~ 2170
ANT Port → BTS Port
9 RF signal Isolation ≥2.0dB @30~150MHz BTS Port → RET Port and ANT → RET Port.
The open port is terminated with 50oHm during the all
measurement.
≥10.0dB @150~800MHz
≥10.0dB @3000~12750MHz
10 RF Path Power 750W ANT Port → BTS Port.
11 Surge Spec. ±5 kA(8/20us) Test Port : RET Port
±3 kA (10/350us) Test Port : ANT Port
12 Intermediation(2×20w) -159dBc IM3
Electrical Specification
P/N: KASCTPR82004
Smart Bias-T (TOP/F/M) [700MHz/AWS]
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Environment Specification Item Specification Remarks
Operating Temperature -40 ~ +65 °C
Operating Humidity (condensation) 5 ~ 95 %
Weather Protection IP 65
Mechanical Specification
Drawing
N O Parameter Spec Comment
1 RF Connector
BTS Port Din Female
ANT Port Din Male
RET Port AISG Circular Female
2 Size (W x D x H) 95.6*67.6*118.3 mm (Including Conn.)
70.0*67.6*41.2 mm (Excluding Conn.)
3 Weight 600 g
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Block Diagram
RS485/OOKMODEM
BTS RET
ANT
RF signal
OOK signal
RS485 signal
DC signal
No. Item Specification Remarks
1 Frequency Range @698 ~ 2170
2 DC Voltage range 10V~30V At ANT Port or RET Port
3 DC Voltage at Non
Feeder Cable Port
0V When follow the voltage at the other port,
measured at BTS Port.
4 Current Range ≤2.3A ANT Port → RET Port
5 DC Path voltage loss ≤1.2V ANT Port → RET Port When the current is 2.3A, the voltage
loss is ≤1.2V.
6 RF Signal Path Loss 2.0dB, max
@2.176MHz+/-400KHz
ANT Port → RET Port
7 RF Signal Path / R/L 23dB, min@696 ~ 2170 ANT Port → BTS Port
8 RF Signal Path Loss 0.1dB, max
@696 ~ 2170
ANT Port → BTS Port
9 RF signal Isolation ≥2.0dB @30~150MHz BTS Port → RET Port and ANT → RET Port.
The open port is terminated with 50oHm during the all
measurement.
≥10.0dB @150~800MHz
≥10.0dB @3000~12750MHz
10 RF Path Power 750W ANT Port → BTS Port.
11 Surge Spec. ±5 kA(8/20us) Test Port : RET Port
±3 kA (10/350us) Test Port : ANT Port
12 Intermediation(2×20w) -159dBc IM3
Electrical Specification
P/N: KASCTPR82005
Smart Bias-T (Bottom/F/M) [700MHz/AWS]
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Environment Specification Item Specification Remarks
Operating Temperature -40 ~ +65 °C
Operating Humidity (condensation) 5 ~ 95 %
Weather Protection IP 65
Mechanical Specification
Drawing
N O Parameter Spec Comment
1 RF Connector
BTS Port Din Female
ANT Port Din Male
RET Port AISG Circular Female
2 Size (W x D x H) 95.6*67.6*118.3 mm (Including Conn.)
70.0*67.6*41.2 mm (Excluding Conn.)
3 Weight 600 g
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Block Diagram
RS485/OOKMODEM
BTS RET
ANT
RF signal
OOK signal
RS485 signal
DC signal
No. Item Specification Remarks
1 Frequency Range @698 ~ 2170
2 DC Voltage range 10V~30V At ANT Port or RET Port
3 DC Voltage at Non
Feeder Cable Port
0V When follow the voltage at the other port,
measured at BTS Port.
4 Current Range ≤2.3A ANT Port → RET Port
5 DC Path voltage loss ≤1.2V ANT Port → RET Port When the current is 2.3A, the voltage
loss is ≤1.2V.
6 RF Signal Path Loss 2.0dB, max
@2.176MHz+/-400KHz
ANT Port → RET Port
7 RF Signal Path / R/L 23dB, min@696 ~ 2170 ANT Port → BTS Port
8 RF Signal Path Loss 0.1dB, max
@696 ~ 2170
ANT Port → BTS Port
9 RF signal Isolation ≥2.0dB @30~150MHz BTS Port → RET Port and ANT → RET Port.
The open port is terminated with 50oHm during the all
measurement.
≥10.0dB @150~800MHz
≥10.0dB @3000~12750MHz
10 RF Path Power 750W ANT Port → BTS Port.
11 Surge Spec. ±5 kA(8/20us) Test Port : RET Port
±3 kA (10/350us) Test Port : ANT Port
12 Intermediation(2×20w) -159dBc IM3
Electrical Specification
P/N: KASCTPR82006
Smart Bias-T (TOP/M/F) [700MHz/AWS]
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Environment Specification Item Specification Remarks
Operating Temperature -40 ~ +65 °C
Operating Humidity (condensation) 5 ~ 95 %
Weather Protection IP 65
Mechanical Specification
Drawing
N O Parameter Spec Comment
1 RF Connector
BTS Port Din Male
ANT Port Din Female
RET Port AISG Circular Female
2 Size (W x D x H) 95.6*67.6*118.3 mm (Including Conn.)
70.0*67.6*41.2 mm (Excluding Conn.)
3 Weight 600 g
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Block Diagram
RS485/OOKMODEM
BTS RET
ANT
RF signal
OOK signal
RS485 signal
DC signal
No. Item Specification Remarks
1 Frequency Range @698 ~ 2170
2 DC Voltage range 10V~30V At ANT Port or RET Port
3 DC Voltage at Non
Feeder Cable Port
0V When follow the voltage at the other port,
measured at BTS Port.
4 Current Range ≤2.3A ANT Port → RET Port
5 DC Path voltage loss ≤1.2V ANT Port → RET Port When the current is 2.3A, the voltage
loss is ≤1.2V.
6 RF Signal Path Loss 2.0dB, max
@2.176MHz+/-400KHz
ANT Port → RET Port
7 RF Signal Path / R/L 23dB, min@696 ~ 2170 ANT Port → BTS Port
8 RF Signal Path Loss 0.1dB, max
@696 ~ 2170
ANT Port → BTS Port
9 RF signal Isolation ≥2.0dB @30~150MHz BTS Port → RET Port and ANT → RET Port.
The open port is terminated with 50oHm during the all
measurement.
≥10.0dB @150~800MHz
≥10.0dB @3000~12750MHz
10 RF Path Power 750W ANT Port → BTS Port.
11 Surge Spec. ±5 kA(8/20us) Test Port : RET Port
±3 kA (10/350us) Test Port : ANT Port
12 Intermediation(2×20w) -159dBc IM3
Electrical Specification
P/N: KASCTPR82007
Smart Bias-T (Bottom/M/F) [700MHz/AWS]
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Environment Specification Item Specification Remarks
Operating Temperature -40 ~ +65 °C
Operating Humidity (condensation) 5 ~ 95 %
Weather Protection IP 65
Mechanical Specification
Drawing
N O Parameter Spec Comment
1 RF Connector
BTS Port Din Male
ANT Port Din Female
RET Port AISG Circular Female
2 Size (W x D x H) 95.6*67.6*118.3 mm (Including Conn.)
70.0*67.6*41.2 mm (Excluding Conn.)
3 Weight 600 g
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Portable Antenna Controller (PAC) - I
Electrical Specification
Input Voltage Rechargeable Battery 11.1V(3.7V 3Cell), 1.5AH, Li-Polymer
External Power 19V, 3.68A, AC/DC SMPS Adaptor
Communication protocol RS-232, RS-485/422
Communication speed 19200bps (Max. 115200 bps)
Environmental Specification
Mechanical Specification
Pin No. Description
1 RS-485B
6 RS-485A
5, 9 Vdc(DC +15V)
4, 8 DC GND
3 RS-485GND
Operating Temperature 32 ∼ 104 F
Operating Humidity 10% ~ 75% RH
Storage Temperature -4 ∼ 158 F
Storage Humidity 10% ~ 75% RH
Operating Temperature 32 ∼ 104 F
Physical Dimension 5.07 x 8.42 x 1.85 inch
Weight 0.75kg [1.65 lbs]
DC +19V INPUT PORT DC Jack Male
RS-232 PORT D-SUB 9PIN FEMALE
RS-485/422 PORT D-SUB 9PIN MALE
D-Sub 9P (RS-485 / 422) Pin Specification
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Portable Antenna Controller (PAC) - I
[The shape and description of PAC-I]
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Portable Antenna Controller (PAC) - A
Electrical Specification
Input Voltage Rechargeable Battery 11.1V(3.7V 3Cell), 1.5AH, Li-Polymer
AC/DC Adaptor 19V, 3.75A(MAX)
Communication protocol RS-232, RS-485/422
Communication bit rate 9600, N, 8, 1
D-Sub 9P (RS-485 / 422) Pin Specification Pin No. Description
1 RS-485B
6 RS-485A
5, 9 Vdc(DC +15V)
4, 8 DC GND
3 RS-485GND
Environmental Specification
Mechanical Specification
Operating Temperature 32 ∼ 104 F
Operating Humidity 10% ~ 75% RH
Storage Temperature -4 ∼ 158 F
Storage Humidity 10% ~ 75% RH
Operating Temperature 32 ∼ 104 F
Physical Dimension 5.07 x 8.42 x 1.85 inch
Weight 0.75kg [1.65 lbs]
DC +19V INPUT PORT DC Jack Male
RS-232 PORT D-SUB 9PIN FEMALE
RS-485/422 PORT D-SUB 9PIN MALE
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Portable Antenna Controller (PAC) - A
(1) RS-232 Port(3) RS-485
Port
(5) Display Window
(6) Membrane S/W
(7) Power Switch (8) AC/DC AdaptorInput Port
(4)Shoulder strap clamp
PAC-A
[The shape and description of PAC-A]
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AICM (Air Interface Control Module)
Electrical Specification
Power supply DC
Power range -48V (-37V ~ -72V)
Current 48V, 300mA, (Normal)
Communication Specification 10/100 Base-T, IEEE 802.3/802.3u Compliant
Communication Protocol TCP/IP, DHCP, UDP
Mechanical Specification
Dimension (H x W x D) 1U (EIA standard) x 482mm x 320mm
Weight ≤ 10Kg (MAX)
Operating Temperature -10 ~ 70
Humidity 5% ~ 95%
Storage Temperature -40 ~ 80
RS-232 Support a debug port
Communication parameter
setting 38400, N, 8, 1
Operating Temperature -10 ~ 70
Humidity 5% ~ 95%
Storage Temperature -40 ~ 80
RS-232 Support a debug port
Communication parameter
setting 38400, N, 8, 1
Operating Temperature -10 ~ 70
Humidity 5% ~ 95%
Storage Temperature -40 ~ 80
RS-232 Support a debug port
Communication parameter setting 38400, N, 8, 1
Environmental Specification
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
AICM (Air Interface Control Module)
AICM Drawing
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Tower Interface Control Unit (TICU) at BTS
Input voltage range DC: -48V (-36V~-72V)
Current < 4A (- 48VDC standard)
Connectors
6 X QMA (Female type) OOK Signal
12 X SMA (Female type) Coupling Input
1 X SMA (Female type) SYNC Input
Power supply to TTLNA Output voltage : +15VDC
Output current : MAX 2.3A
Protocol to TTLNA 2.176MHz OOK Signal, according to AISG:Issue2.0
Interface to BTS SNMP
Temperature range –22 ~ +140
LED
PWR Input power to TICU
SYNC Status of SYNC Signal
NMS TX Trasmission port for Ethernet
NMS RX Receiving port for Ethernet
α0 Status of Alpha 0 Port (Alarm / Normal)
α1 Status of Alpha 1 Port (Alarm / Normal)
β0 Status of Beta 0 Port (Alarm / Normal)
β1 Status of Beta 1 Port (Alarm / Normal)
γ0 Status of Gamma 0 Port (Alarm / Normal)
γ1 Status of Gamma 1 Port (Alarm / Normal)
Weight < 11 lbs
Dimensions (H x W x D) 1.93 x 18.82 x 8.66 (Inch)
Front panel dimensions (H x W x D) 1.93 x 18.82 x 0.1 (Inch)
Electrical Specification
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Tower Interface Control Unit (TICU) at BTS
PORT PROTECT MODE
OOK Signal Port IEC 61000-4-5, Common (± 0 – 1 kV / 8/20 μs)
-48VDC Input Port IEC 61000-4-4, (1kV / Pulse repetition rate: 5kHz)
EMC Specification
IEC 61000-4-2 , LEVEL 4 (Transient / BURST)
Contact discharging ±8KV
Air discharging ±15KV
ESD Specification
EMI Specification IEC 61000-4-6 , (Emission) CLASS A
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Tower Interface Control Unit (TICU) at BTS
14 6532
[The shape and description of TICU]
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Adjustable Mounting Clamp
Mechanical Specification
Weight Up kit 7.3lbs [3.3kg]
Down kit 3.8lbs [1.7kg]
Wind load
(max.)
Front / Rear Direction 330lbs [150kgf]
Side Direction 176lbs [80kgf]
Material Stainless Steel
Pole Diameter Ǿ1.96~3.14inch [Ǿ 50~80mm]
Packing Size, W x L x H 10.6 x 15.7 x 0.4 inch
Shipping weight 12.4lbs(5.6kg)
Upper kit
Down kit
www.kmwcomm.com
KMW Communications Base Station Antennas For Mobile Communications
Adjustable Mounting Clamp
Recommended Torque
240kgf.cm
(M10, 17mm Spanner)
Recommended Torque
120kgf.cm
(M8, 13mm Spanner)
Recommended Torque
120kgf.cm
(M8, 13mm Spanner) Recommended Torque
240kgf.cm
(M10, 17mm Spanner)