The Sum of Precisionand Operator Convenience

u-drillUniversal Multi-Seeding Combination

Effective seeding

Speed up - sow when the soil is ready,

with the Kverneland u-drill

IT’S CRITICAL

Sowing your crop at the right moment, is one of the critical

decisions you have to take as an arable farmer. The soil

has to be prepared with care and the moment of sowing

depends on the right conditions, like local weather. To be

successful you need a drill that is effective.

IT’S SPEED

When the time is right, you want to drill imme diately. Tomor-

row conditions may be worse, so speed is

important. You need a machine that has the right capacity

to fi nish the job in time. To give your crop a headstart.

IT’S EASY

Soil structure is not the same in every fi eld, as are working

conditions. So you often have to adjust your drill.

You don’t want to have to stop working every time. That’s

why we have developed seed drills that can be easlily ad-

justed, mainly from within the tractor cab. Like the u-drill.

IT’S PLACEMENT

Once you have confi gured your machine, you want to rely

on perfect execution. The Kverneland u-drill is excellent in

precision placement of the seed. Not too deep, not too shal-

low. So it will germinate evenly and result in a great crop.

IT’S EFFICIENCY

You invest in the best equipment for sowing your crop. In re-

turn you want the best results and low running costs. Our

seed drills are designed with the lowest weight possible.

Less pulling force needed means saving on fuel costs.

IN SHORT, IT’S EFFECTIVE

www.kverneland.comwww kverneland com

u-drill sets new benchmarksWith the u-drill, Kverneland Accord – the specialists for seeding technology within the Kverneland Group – have launched a reliable multi-seeding combination for conventional seeding and mulch seeding on large areas – ideal for farmers with an annual rate of work of 80 to 5,000 hectares.

With its mature design, the u-drill combines high performance with operator convenience to achieve consistently good work results – even at high speeds! The secret is a modular design with perfectly aligned stages of work.

u-drill: Perfect Seed Placement at High Speeds

Uniform seedbed over the entire working widthPerfect preparation, levelling, re-consolidation of the seedbed, and placing and pressing the seeds is achieved in one single pass – that saves time! The high accuracy of distribution and the precise depth placement ensure a uniform emergence. Here, proven Kverneland components such as the Qualidisc short disc harrow are at work, which ensures a fine and uniform seedbed over the entire working width.

The heart of the machine is its coulters. The extremely slim structure of the laterally offset discs ensures an easy penetration into the soil so that nearly all of the coulter pressure (as much as 100kg) can be used for pressing with the integrated press wheels – that saves fuel!

Consistently good results, whether on sand, loam or clay

Flexible equipment options, interchangeable tools and a lightweight, yet robust structure allow the deployment of the u-drill on all kinds of sites. For a perfect result in all seeding conditions,

Kverneland recommends the fully equipped u-drill with front tyre packer. Kverneland offers the u-drill in 3m, 4m and 6m.

Conclusion: The universal multiseeding combination in proven Kverneland quality saves time and money!

The u-drill is extremely operator-friendlyAll important settings can be changed from a central point, at the push of a button. The coulter depth can be adjusted conveniently from the cab, calibration is started by pushing a button directly at the metering device, and the automatic headland management system only requires a single hydraulic control valve.

It goes without saying that the u-drill is fully ISOBUS compatible, so the driver is always kept informed about the machine’s performance at a glance.

Another plus is the large hopper with its capacity of 3,000l (3/4m) resp. 4,350l (6m) and the easily accessible metering devices. Application rates and part widths can be controlled by the optional GEOcontrol. The farmer can fully focus on driving in the field.

Step 1: Level the soil For the best possible preparation, the front tyre packer levels the soil, crushes large clods and thus paves the way for the optimum depth control of the following tools. The front tyre packer has a diameter of 800mm and can be lifted hydraulically, simply by pushing a button, when it is not needed.

Step 2: Prepare the seedbed Two rows with short disc harrows – the familiar and well proven Kverneland Qualidisc with its conical disc shape and individual suspension ensures a fine and uniform seedbed over the entire working width. Thanks to a new hydraulic system, the disc harrow can be adjusted with continuous variability from the cab.

Step 3: First pack, then seed For a perfect depth control of the coulters and an optimum seed-to-soil contact for excellent capillary action, the loosened soil is re-compacted with large tyre packers. The large tyre diameter of 900mm significantly reduces the tractive power required by the machine and thus ensures a consistently good work result.

Strong, User-friendly and Universal – u-drill Step by Step

ELDOS - The new metering deviceElectrically driven metering devices with ISOBUS and sensor controlRemote control for calibration test at the metering unit.For small to large seeds and fertilizer with application rates from 2 to 400kg/ha using only 4 standard rotors. Toolless exchange of the rotors, quick and easy by hand. Simple and exact calibration test by separate seed guidance.Integrated emptying flap and shut off.

NEW!•

•

•

•

•

•

Step 4: Seed and press with guaranteed seeding depth The slim shape of the coulters with their slightly offset steel discs makes for an easy penetration into the soil. As a consequence, little pressure is required in this step and only little soil is displaced. The coulter pressure of 100kg can thus primarily be used for the pressing with the integrated press

Step 5: Closing Combing the soil completes the seeding. S-shaped or finger harrows ensure an optimum covering of the seeds. The working intensity can be set by the stepless pressure adjustment and at three different angles. To prevent damage to the harrow when reversing, it is equipped with an effective reversing device.

wheels. The result: uniform seeding depth even at high working speeds! The seeding depth and the coulter pressure can be centrally controlled by the push of a button from the tractor – this saves additional time.

The secure depth control and the pressing-on of the seed grain produce a capillary system in the soil that ensures a perfect water supply and excellent germination.

State of the Art Seeding Technology

Kverneland as the pioneers of pneumatic seeding technology present ELDOS, a new electric driven metering device for all their pneumatic driven seed drills.

ELDOS, the new metering device is always electric driven by e-com and fully ISOBUS compatible. GEOcontrol by GPS signal is possible which avoids double seeding on headlands for example. Special sensors ensure complete functionality from the tractor cab. Four standard rotors for fine and large seeds or fertilizer are available. If the driver has taken the wrong rotor by mistake, he will get a warning since the system is completely self-controlled and recognises the rotors. The exchange of the rotors is quickly and easily done without any tools. Application rates from 2 to 400kg/ha are possible. The metering device is easily accessible.

CalibrationThe calibration test has become very simple due to the separate seed guidance. A remote control allows the driver to operate the calibration process at the metering device. No gear has to be adjusted. The driver simply presses one start button at the metering device, enters the desired values into the terminal, and that’s it. The calibration is done automatically. A calibration flap with an integrated gate prevents any seed from dropping into the hose.

Remote control for calibration start/stop/break

Calibration fl ap sensor

Toolless dismountable fl ap

Different rotors for different seeds

Rotor recognition, avoids misuse

Antistatic housing

New e-com software to steer

the system

Fully integrated electric drive

Air suck bypass

Toolless dismountable fl ap for heavy

seeds

Gear without any need to adjust

Central arm for calibration test fl ap

Rotor 1 for wheat Rotor 2 for gras

Rotor 3 for rape Rotor 4 for wheat

Different rotors for different seeds

u-drill rigid3.00 - 4.00m working width

The rigid u-drill is available either as standard drill combination (u-drill) or as grain and fertilizer version (u-drill plus - see page 12). The rigid u-drill comes in working widths of 3.00 and 4.00m and convinces with its compact design, an advantage on the road and in field. The transport width corresponds to the working width of the machine and the rear mounted wheel packer also acts as a transport device.The u-drill works at high forward speeds up to 18 km/h, whilst maintaining a consistent working depth.The u-drill meets the Isobus 11783 standard, with the ability to control all main elements of the drill individually and from the IsoMatch Tellus screen (or other ISO 11783 compatible screens). A host of new electronic features are available as standard equipment such as a fully automatic headland management system and GEOcontrol including variable seed rate control.

u-drill fold6.00m working width

Powerful performance - that is what the u-drill fold offers. Available in 6m working width with a hopper content of 4,350l, it presents many technical details which will facilitate your work.

The easy adjustment of the machine will impress you. Starting with the good access of the metering device, the easy adjustment of the disc harrow and the coulters, up to the filling of the easily accessible hopper, the u-drill is quickly ready for operation. The seeding depth is set centrally via clips, optionally a central seed depth adjustment via ISOBUS terminal is available.

Large press wheels (Ø 380 x 50mm) with a central pressure adjustment up to 100kg ensure a good and constant seed-to-soil contact. A half-width shut-off of the coulterbar is standard.

Minimum power requirement is only 120kW.

The metering device is easily accessible.

Large off-set rear wheel packer (ø900mm)

The u-drill plus is a combined grain and fertilizer version of the u-drill.

Depending on the working width, the hopper capacity is either 3,000l (3m and 4m) or 4,350l (6m). The hopper is divided lenghtwise and the two metering devices are accordingly positioned either side. The proportion grain : fertilizer is 40 : 60.

The u-drill plus is especially adapted to the needs of those markets where a precise fertilizer placement at the seed is required.

These crops can show substantial yield increase when applying fertilizer with a

relatively high % of phosphate together with the seeds. In Scandinavian and Eastern European countries the fertilizer is usually placed between the rows besides and below the seed, whereas in other countries e.g. Scotland the preferred method is to apply both seeds and fertilizer in the same rows. In trials of spring sown crops, yields have shown increases up to 25% compared to crops where the fertilizer has been applied by other methods.

There are two different ways of fertilizer placement to fulfil customers’ demand: The first version offers the fertilizer placement in the second row of the disc harrow unit to place each 25cm a row

of fertilizer. The second possibility is to place the fertilizer in each seed row at the CD coulter unit with a second tube.

The u-drill plus is able to deliver fertilizer application rates up to 400kg/ha and 15kph. The pressurised hopper system at the 6m version ensures these rates are maintained even under the most difficult conditions. The hydraulic fan drive is powered from the tractor hydraulics.

u-drill plus

Fertilizer placement by the disc harrowThe fertilizer outlets in the second row of the disc harrow are allocated in such a way that the fertilizer line is applied exactly in between two sowing rows. All plants have exactly the same distance to the incorporated fertilizer depot. By adjusting the working depth of the disc harrow the depth of the fertilizer placement is controlled.

Fertilizer application in the seeding row The fertilizer application in the seeding row is done by an extra fertilizer outlet. The fertilizer is placed in mixture with the seeds. This is especially suitable for phosphoric fertilizer in order to support the initial germination and development of the plants in the most efficient way. The special design of the coulter with two exits also allows the seeding of two different crops in just one working pass.

Fertilizer Placement

Depending on the individual agronomic requirements, the fertilizer can be applied either directly in the seeding row or in between two rows.

Positioning of the distribution heads: Fertilizer place-ment by the disc harrow (above), fertilizer placement in the seeding row (below)

CD Mulch Seed Coulter

The new CD mulch seed coulter consists of two steel discs (Ø410mm) with 12.5cm row spacing. Thanks to its very slim design the soil movement is very little, which leads to a smaller need for pressure to achieve the seeding depth. Thus more of the available coulter pressure of up to 100kg can be lead to the press wheels when needed. The coulter pressure can be set infinitely.Fully integrated maintenance-free disc bearings provide for an easy flow of the coulter.

The press wheels (Ø 380mm) are made of special rubber which convinces with a self-cleaning effect. So no scrapers are required.

The coulter staggering is 200mm. The coulter pressure adjustment is done centrally and can be set infinitely from

0-100kg. The seed depth adjustment is centrally steered via the ISOBUS terminal (series equipment).

The coulter bar consists of one central box-tube and is fixed to the seeder via a 3-point parallelogram linkage. The distribution head is mounted on the coulterbar.

CD mulch seed coulter - The advantages:

• Extreme slim design – less pressure required for penetration.

• Less pulling force – due to less soil movement.

• Integrated depth guidance and press wheel functionality.

• Maintenance free, high performance bearings.

• Only one coulter – no left / right nor short / long coulters.

Kverneland Accord offers a calculation tool for the seed rate adjustment of Kverneland Accord pneuma-tic seed drills.Calculate the seed rate by entering the respective data of the cereal or enter directly the required seed rate: kg/ha.

The Kverneland Group Seeding Apps are available for free through Apple’s App Store and the Google play store.

Seed Rate Calculation Tool

The Hopper - Everything in View

Often large machines offer limited visibility and manoeuvrability. Not so with the u-drill! From the tractor cab the operator has the entire machine in view, the working procedures can be monitored constantly and conveniently. The Kverneland Accord u-drill offers the perfect balance between size and compactness!

The hopper can easily be filled using big bags and a front loader or telescopic handler. For the 6m grain version a filling auger is available optionally.The hopper has a capacity of 3,000l (3/4m) resp. 4,350l (6m). The metering device of the grain only version is centrally positioned whereas the two metering devices of the plus version are laterally positioned.

The hopper is fitted with an access platform system ideal for maintenance

purposes and the monitoring of the filling operation. Steps inside the hopper provide for additional safety. LED lights are available as option.

Showing glasses in the front wall of the hopper give the operator a constant overview of the level in the hopper. A close fi tting tarp cover protects the seed from dust and water and can easily be opened and closed with the help of the quick release locking lever.The positioning of all the major components is well organised and clear.

The ratio grain : fertilizer at the plus version is 60 : 40.

Safe on the Road

Quick in Field

In fi eld the u-drill is quickly brought into work position. Without leaving the tractor, the operator initiates the unfolding sequence via the ISOBUS terminal.

9

Electronics

Firm grip accurate control Grip bar in combination with easily accessible digital touch screen soft keys.

The IsoMatch Tellus is the fi rst ISOBUS terminal in the world with the capability to operate 2 different (machine) screens through 1 terminal, without the need to constantly toggle between screens.

Robustly designed aluminum body and ergonomic rubber grip

The next generation universal ISOBUS Terminal – IsoMatch Tellus• Two ISOBUS interfaces in one terminal• Multifunctional ergonomic design• ISOBUS Shortcut Button (ICB)

Flow-Check Seed-flow monitoringFor pneumatic seed drills Kverneland Group offers an additional seed flow check. This is an independent machine control sys tem which monitors the seed distribution tubes automatically, immediately recognising and reporting any blockages or errors.The display indicates the affected seed delivery tube, making it possible to localise and re move the problem quickly. The system is suitable for all common seed types and can be fitted retrospectively on all pneumatic seed drills.

IsoMatch Tellus GO Kverneland Group is extending its range of Universal ISO-BUS Terminals with the IsoMatch Tellus GO. This new mul-tifunctional one-screen terminal is developed for fast and simple control of any ISOBUS implement, giving the farmer a ‘custom made’ experience as it suits all needs for plain and effi cient handling of farming machinery and tasks. IsoMatch Tellus GO is the farmers fi rst step into Precision Farming. With the easy to use application, IsoMatch GEOcontrol, it is possible to boost effi ciency and save time and costs. The application includes Manual Guidance, Section Control and Variable Rate. Precision Farming is just one click away.

With the development and availability of already more than 50 ISOBUS machines, Kverneland Group profiles itself as the ISOBUS company for agricultural equipment.

Kverneland Group has a strong focus on development and production of new electronic solutions for agricultural tractors and machinery, all to make the farmers live easy and ready for the future. All initiatives in development in ISOBUS Technology are undertaken:

• To increase the customer benefits in relation to the application of ISOBUS technology within ISOBUS machines.

• To improve the compatibility of ISOBUS products world wide (plug & play).

ISOBUS Shortcut Button (ICB)The ISOBUS Shortcut Button (ICB) is a new feature conforming to the very latest ISO 11783 standardisation. When the operator detects an unsafe situation and presses the ISOBUS Shortcut Button (ICB), a safety message will be sent to the connected ISOBUS implement.

IsoMatchIsoMatch Tellus is the fi rst product of the new product family: IsoMatch. Iso-Match is a guarantee for high quality of products produced and developed by Kverneland Group Mechatronics.

22

Options

Mid-mounted front packer (Ø 800mm)

Complete front packer (Ø 800mm) Finger harrow 12mm

Filling auger (6m grain only) Hydraulically folding track marker with notched discs

Track eradicators

Pneumatic brakes / Hydraulic brakes Extended drawbar Pre-emergence marker

LED work lights Hopper volume weighing system with separate monitor

Technical Data

Model u-drill rigid u-drill fold u-drill plus

Working width (m) 3.0 4.0 6.0 3.0 4.0 6.0

Transport width (m) 3.0 4.0 3.0 3.0 4.0 3.0

No. of CD coulters 24 32 48 24 32 48

No. of metering devices 1 1 2 2 2 2

Hopper capacity (l) 3,000 4,350 3,000 4,350

Required oil volume > 90l/min

Single-acting hydr. valve + zero-pressure return for fan drive

1 x double-acting hydraulic valve for machine control

Power requirement 12 V > 70 A

CD double disc coulters

Coulter pressure up to 100kg

Electro-hydraulic adjustment of the placement depth via ISOBUS terminal

Press wheels (Ø 380 x 50mm)

Row spacing (12.5cm)

Coulter staggering 17.5cm

Electronic adjustment of the seed quantity with radar

Filling level sensors in the seed hopper (1) (1) (2) (2) (2) (2)

Fan speed sensor

Metering device monitoring

Electronic half-width shut-off - -

Mid-mounted front packer (Ø 800mm)

Complete front packer (Ø 800mm) - -

Electro-hydraulic adjustment of the disc harrow working depth via ISOBUS terminal

Disc harrow (Ø 460mm)

Offset tyre packer (Ø 900mm)

Maintenance platform, road transport lights, in-hopper light

The statements in this leafl et are intended as general information and for global distribution. Kverneland Group does not accept any liability for any inaccuracies, errors or omissions. Not all models, speci-fi cations and options may be available in all countries. For more information, please contact your local dealer. Kverneland Group reserves the right to make changes in the design and/or the specifi cations shown or described in this leafl et at any time. Individual features may be added or removed without prior announcement or obligations. If any safeguards of the machine have been removed on the pictures, this was solely done for a better visibility of the machine functions. To prevent any risk of injury, safeguards should never be removed. If, for instance for maintenance purposes, a safeguard needs to be removed, please contact our after-sales service © Kverneland Group Soest GmbH.

Standard equipment Option

Hydraulic fan drive

Lower link suspension Cat. 3N (825mm)

Lower link suspension Cat. 3 (965mm)

Lower link suspension Cat. 4 (965mm) - - - -

S-shaped seed harrow 10mm

Finger harrow 12mm

Calibration set

Filling auger - - - - -

Hydraulically folding track marker with notched discs

Track eradicators (2 tines per track)

Pneumatic brakes

Hydraulic brakes

Extended drawbar for tractors with twin tires up to 4.5m

Pre-emergence marker (centre marking)

LED work lights

iM Tellus for non-ISOBUS-capable tractors

iM Tellus for ISOBUS tractors

Hopper volume weighing system with separate monitor - - -

Headland management

Weight (kg) (with front packer + track eradicators)

4,600 5,400 8,120 4,800 5,600 8,400

Min. power requirement (kW) 90 120 130

iM FARMINGsmart effi cient easy FARMING

iM FARMING makes mechanical work smarter, more effi cient and simpler. The use of

ISOBUS technology makes machines easier to connect, operate, control and monitor.

Maximum return from your investments, that is the core of Kverneland Group’s iM FARMING solutions. iM FARMING describes and presents our offering on ISOBUS machines and solutions for electronic steering of implements.All aimed at giving an insight into the benefi ts and effi ciency of our extensive offering, adapted to your requirements. That is what you can expect from Kverneland Group. Now and in the future. Intended to make life easier for farmers.

Combination of HeadlandManagement and GEOcontrol

User-friendly Headland Managment for the u-drill

The larger the machine becomes the more important it is to have a high level of automation for the operator! With the u-drill universal seeding combination Kverneland has achieved this and offers major advantages for the farmer.

Up to now, it has not been possible to control the individual implements of the seeding combination one by one and independent from each other. The whole machine had to be lifted or set down simultaneously loosing precious meters. Due to the irregular starting and stopping of the machine, overlapping and bald spots often occur between the fi eld and the headland. This is now history.Due to the intelligent combination of GEOcontrol and headland management, exact timing of the control processes is achieved. Via GEOcontrol, the metering device is stopped automatically by entering the headland and started again at the beginning of the new pass. Therefore, overlaps are prevented, wear and tear is decreased and seeds up to 5% can be saved. Headland Management controls the soil working implement, the packer re-consolidation and the coulterbar

iM In

tellig

ent

iM G

lobal

iM in

Contro

l

iM R

eady

ONE TERMIN

AL TO C

ONTROL ALL

OF M

Y

ISOBUS M

ACHINES

ISOBUS, T

HAT’S

WHAT

I CALL

SMART

WORKIN

G

WIT

H GPS IT

´S S

IMPLE

AND M

ORE EFFIC

IEEASY,

I JUST

USE INTELL

IGENT

MACHINERY

Section ControlIsoMatch Eye

Once you have an IsoMatch Tellus terminal you can simply unlock the IsoMatch GEOcontrol application (after you have purchased a license key) and you get access to all precision farming applications: automatic switching on and off implement sections, variable rate control, manual guidance and easy exchange of data between the IsoMatch Tellus and your PC. To get familiar and convince yourself about the customer benefi ts of IsoMatch GEOcontrol you are entitled to 10 hours free use of the application, before purchasing a license. No doubt for us, you will quickly become an enthusiastic follower of this new technology!

Variable Rate ControlIsoMatch Global** For seed drill operations a RTK-GPS is recommended.

Variable Rate ControlIsoMatch GEOcontrol will automatically adjust the output rate for the implement. This can be based on input from smart sensor technology or via the Farm Management System.

Section ControlIsoMatch GEOcontrol performs automatic switching on and off implements sections.

IsoMatch GEOcontroland SEEDERcontrolWould you like to have some clear benefi ts? You just have to buy the IsoMatch Tellus terminal, a license and one of our ISOBUS compatible seeders, like a pneumatic seed drill with ESA.

Variable ratecontrol

Section control

Manual guidance

IsoMatch InLine

Documentation

AC

7551

81D

-10/

2015

Original spare partsKverneland Group spare parts are designed to give reliable, safe and optimal machinery performance - whilst ensuring a low cost life-cycle. High quality standards are achieved by using innovative production methods and patented processes in all our production sites.

Kverneland Group has a very professional network of partners to support you with service, technical knowledge and genuine parts. To assist our partners, we provide high quality spare parts and an effi cient spare parts distribution worldwide.

Kverneland GroupKverneland Group is a leading international company developing, producing and distributing agricultural machinery and services.

Strong focus on innovation allows us to provide a unique and broad product range with high quality. Kverneland Group offers an extensive package aimed at the professional farming community, covering the areas of soil preparation, seeding, forage and bale equipment, spreading, spraying and electronic solutions for agricultural tractors and machinery.

Kverneland Group UK Ltd.Walkers Lane, Lea Green, St. HelensMerseyside, WA9 4AFPhone + 44 1744 8532 00

uk.kverneland.com

Watch us on YouTubewww.youtube.com/kvernelandgrp

Like us on facebook www.facebook.com/KvernelandGroupwww.facebook.com/iMFarming

Follow us on Twitter#KvernelandGroup#iM_Farming