lb-pppoe
If you can't read please download the document
TRANSCRIPT
/ ip address add address=192.168.100.1/24 network=192.168.100.0 interface=ether5 /ip firewall mangleadd chain=prerouting in-interface=pppoe-out1 connection-state=new new-connection-mark=pppoe-out1_conn action=mark-connection passthrough=yesadd chain=prerouting in-interface=pppoe-out2 connection-state=new new-connection-mark=pppoe-out2_conn action=mark-connection passthrough=yesadd chain=output connection-mark=pppoe-out1_conn new-routing-mark=to_pppoe-out1 action=mark-routing passthrough=yesadd chain=output connection-mark=pppoe-out2_conn new-routing-mark=to_pppoe-out2 action=mark-routing passthrough=yes/ip firewall mangleadd chain=prerouting in-interface=ether5 connection-state=new dst-address-type=!local per-connection-classifier=both-addresses:2/0 action=mark-connection new-connection-mark=pppoe-out1_conn passthrough=yesadd chain=prerouting in-interface=ether5 connection-state=new dst-address-type=!local per-connection-classifier=both-addresses:2/1 action=mark-connection new-connection-mark=pppoe-out2_conn passthrough=yesadd chain=prerouting in-interface=ether5 connection-mark=pppoe-out1_conn action=mark-routing new-routing-mark=to_pppoe-out1 passthrough=yesadd chain=prerouting in-interface=ether5 connection-mark=pppoe-out2_conn action=mark-routing new-routing-mark=to_pppoe-out2 passthrough=yes/ ip route add gateway=pppoe-out1 routing-mark=to_pppoe-out1add gateway=pppoe-out2 routing-mark=to_pppoe-out2 add gateway=pppoe-out1 distance=1 add gateway=pppoe-out2 distance=2 / ip firewall nat add chain=srcnat out-interface=pppoe-out1 action=masquerade add chain=srcnat out-interface=pppoe-out2 action=masquerade --------------------------------------------------------------------------------------------------------------------------------------------1. PPPoE ClientSGENERALIndicar Interface DIAL OUTusuario passworddesactivar checks de: Dial on Demand Add Default Route Use Peer DNS2. IP ADDRESS: INGRESAR IP DE INTERFACE3. IP DNS: INGRESAR DNS DE PROVEEDOR Y ACTIVAR CHECK: ALLOW REMOTE REQUEST || SI SE USA SOLO PARA BALANCEAR ENTONCES OBVIAR ESTE PASO4. SYSTEMNTP CLIENTE: ACTIVAR CHECK: ENABLE MODE: UNICAST PRIMARY NTP SERVER: 129.6.15.28 SECONDARY: 129.6.15.29 5. SYSTEM CLOCK: CAMBIAR TIME ZONA NAME: AMERICA/LIMA6. SYSTEMIDENTY: NOMBRE DE IDENTIFICADOR DEL EQUIPO7. SYSTEMUSERS>NAME: maersa8. . PASSWORD: CAMBIARfaltan9. TOOLS: EMAIL PORTS: 25 > SERVER: (ping smtp.gmail.com) >FROM: [email protected] > USER: [email protected]. SCRIPT PARA BACKUP:script para email(mikrotikv6)11. SHEDULER PARA INTERVALO DE ENVIO de backup3. devolver los scripts15. IP FIREWALL MANGLE script16. SYSTEM: LOGGING: VER FIGURA C1 Y C2(ACTIONS Name: errores Type: email EMAIL:[email protected] || RULES Topics:info Prefix: poner un prefijo identificador Action: errores) SI DESEA AGREGA MAS REGLAS