lexf7350-03_cti 160 oly
TRANSCRIPT
-
8/10/2019 LEXF7350-03_CTI 160 OLY
1/2
T R A N S F E R P A N E L S
CTI RANGELoad Transfer Panel
Exclusively from your Catdealer
Olympian Generating Sets introduces a new
range of intelligent load transfer panels. The
CTI load transfer panel provides you with the
assurance that when the utility power fails, power
will automatically be transferred to the building
load from the mains to the generating set.
Generatingset
Mains
Load Transfer
Panel
Two Wire
Control
Load
Load fed
from genset
Load fed
from mains
FEATURES
CONTROLS
lThe ability to select between contactor and switch
mode, allowing you to protect the electricityload and set the CTI load transfer panel to the
mode which best suits the application.
lA highly visible and user-friendly digital display
allowing information to be read with minimal
scrolling.
lFast acting switch, reducing transfer times
between generating set and utility power.
lPre-programmed, allowing the panel to run
on installation with the ability to customise if
necessary.
LEXF7350-02 (09/09)LEXF7350-03 (09/09)
-
8/10/2019 LEXF7350-03_CTI 160 OLY
2/2
T R A N S F E R P A N E L S
FEATURES OPTIONAL FEATURES
lWall Mounted
lStatus IndicationUtility power availableUtility power on loadGenerating set available /Generating set on loadUtility power and generating setoff loadManual mode / Automatic modeTest on load / Test off loadManual re-transfer enabled /requiredPower / Error indication (LED)
lFacia
Symbolic icons to allow formultiple languages
lMechanically Held Switch
Facility for manual changeover
lLiquid Crystal Display (LCD)Utility power L1-2, L1-3, L2-3voltageUtility power L1-N, L2-N, L3-NvoltageGenerating set L1-N, L2-N, L3-NvoltageGenerating set L1-2, L1-3, L2-3
voltageUtility power frequency /Generating set frequency
Number of times switch transfersfrom mains to generating set
Timer settings
lSelection between contactor
or switch mode
lStandardsComplete enclosure meetsstandard IEC 60947-6-1
Switch meets standard AC31B
lControlsUnder / over frequency failureUnder / over frequency restorationManual / auto re-transferMode select push buttonUnder / over volts failureUnder / over volts restoration
Delay on start timerDelay on transferDelay on re-transferDead band timerRun on timerAuto / manual control keyswitchLamp test pushbuttonPadlock facility
lTop and Bottom Cable Entry
lTAUXAuxiliary Contactsfor
switch position, padlocking andauto / manual.
lVSTVoltage Sensing Tap
allowing for pole voltage sensing.
lTLNKSolid Neutral Kitto
connect neutral cables from the
mains, generating set and load.
lTIP1Terminal Shroudfor added
protection.
lTLPR Lightning Protection
ensuring the safety of system
during lightning storms.
lTIP5 Ingress Protection IP54
protection for the control module.
lTELT Load Terminal Extension
improving ease of installation.
Rating A B C WeightModel Amps mm (in) mm (in) mm (in) kg
CTI 63 63 A 600 (23.6) 400 (15.7) 200 (7.9) 19.0 (41.8)
CTI 100 100 A 600 (23.6) 400 (15.7) 200 (7.9) 19.0 (41.8)
CTI 125 125 A 600 (23.6) 400 (15.7) 200 (7.9) 19.0 (41.8)
CTI 160 160 A 600 (23.6) 400 (15.7) 200 (7.9) 19.0 (41.8)
Exclusively from your Catdealer
CTI-DIMENSIONS
Information contained in this publication may be considered confidential. www.Cat-ElectricPower.com
Market: International Discretion is recommended when distributing.
Materials and specifications are subject to change without notice. 2009 Caterpillar
LEXF7350-02 (09/09) CAT, CATERPILLAR, their respective logos OLYMPIAN, "Caterpillar Yellow", and the "Power Edge" trade dress, as well as All rights reserved.
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. Printed in U.S.A.
278-687
LEXF7350-03 (09/09)