macchine per la lavorazione del marmo e del granito ... · con volantino manual tilting blade 0°...
TRANSCRIPT
Astra3 Axis
www.emmeduedivision.com
Macchine per la lavorazione del marmo e del granito
Machines for processingmarble and granite
Cutters
is a brand of Industrie Montanari S.r.l.
Via Fondo Ausa, 23 - 47891 DoganaRepublic of San Marino
Tel. (+378) 0549 908926 - Fax (+378) 0549 [email protected]
Blade & ToolsHIGH SPEED
Fresatrice automatica a 3 assiAutomatic bridge saw machine with 3 axis
Astra 3 Axis
Laser segna taglioLaser for cutting line
Piano di lavoro inclinabile idraulicoHydraulic tilting work table
Piano di lavoro girevole manualeManual rotating work table
Pulsantiera remotataHand remote control
Rotazione manuale testa 0° - 90° - 180°Manual rotating head 0° - 90° -180°
Inclinazione manuale disco 0° ÷ 90° con volantinoManual tilting blade 0° ÷ 90° by hand weel
Rotazione automatica testa 0° - 90° (opt.)Automatic rotating head 0° - 90° (opt.)
Inclinazione automatica disco da 0° a 45° (opt.)Automatic tilting blade from 0° to 45° (opt.)
Teleassistenza attraverso collegameno internet per la risoluzione di eventuali anomalie.
Teleservice through internet connection for the resolution of any anomalies.
LA FRESATRICE PIÙ COMPATTA E DINAMICA DELLA SUA CATEGORIA.
Fresatrice automatica versatile, precisa, a�dabile e facile da utilizzare.
THE MOST COMPACT AND DYNAMIC BRIDGE SAW IN ITS CATEGORY.
Automatic bridge saw versatile, precise, reliable and easy to use.
205
500
455
350
277
Astra 3 assi è una moderna fresatrice PLC a ponte mobile a 3 assi interpolati. La struttura macchina ed il piano di lavoro sono realizzati in acciaio elettro-salda-to con trattamento di zincatura a caldo, in immersione, che garantisce elevata resistenza agli agenti esterni.
La movimentazione degli assi X / Y / Z è realizzata con trasmissione a mezzo di guide lineari, temprate e retti�cate con relativi pattini a ricircolo di sfere, il tutto protetto da so�etti.
Il motore lama ha una potenza di Hp 18 - kW 13.20, e può arrivare ad una velocità max di 3000 Rpm con inverter, tagliando spessori �no a 145 mm, con disco da Ø 500 mm, (200 mm con disco opzionale da Ø 625 mm.)
La rotazione manuale della testa prevede bloccaggi meccanici in tre posizioni 0° - 90° - 180°, mentre in caso di rotazione automatica (opzionale) avremo regolazio-ne in due posizioni 0° e 90°.
L' inclinazione manuale della testa è gestita con volan-tino con settaggio in multiple posizioni da 0° a 90°, in caso di inclinazione automatica (opzionale) avremo regolazione in due posizioni 0°- 45°.
Il Pannello di controllo touch-screen da 10”, con display a colori e gra�ca interattiva, presenta un'inter-faccia di facile utilizzo.
Il tavolo di lavoro basculante, (opzionale) con aziona-mento idraulico, favorisce il carico delle lastre, velociz-zando il processo produttivo.
Astra 3 è ideale per realizzare Design da interno ed esterno come, top da cucina, top da bagno, capitelli, tavoli, scale, pavimentazioni e arte funeraria.
Astra 3 Axis is a modern PLC Bridge saw machine with structure and work table made of hot galvanized dipped electro-welded steel, that guarantees high water resistance.
X / Y / Z-axis movements are accomplished on slideways with ball-bearing guide blocks protected by bellows.
The blade motor has Hp18 – kW 13.2 power, it can reach a maximum speed of 3000 Rpm with inverter, cutting thicknesses up to 145 mm. with disc Ø 500 mm. (200mm. with disc Ø 625 mm. Optional)
The head can manually rotate in three positions, 0°- 90°-180° and manually tilt from 0° to 90° with handweel.
In case of automatic rotation (optional) of the head, we have two possible position: 0° or 90°.
If we choose the automatic tilting blade (optional), we have two settings: 0° or 45°.
Panel control touch screen 10”, with colour display and interactive graphics, has a interface easy to use and very intuitive.
The tilting work table with hydraulic pump, (optional) promotes slab loading, speeding up the production process.
Astra 3 is ideal for indoor and outdoor designs such as kitchen counters, bathroom counters, capitals, tables, stairs, �oors and funerary art.
Speci�che / Details
Struttura monoblocco zincataGalvanized monoBlock structure
Banco �sso con piano legnoFixed table with wood surface
Rotazione manuale della testa 0° - 90° - 180°Pneumatic manuale head 0° - 90° - 180°
Inclinazione manuale del disco con volantino 0° ÷ 90°Mnual tilting blade with hand-wheel 0° ÷ 90°
Consolle su braccio mobileConsole on movable arm
Laser segna taglioLaser for cutting line
Protezioni laterali con barriere fotoelettricheFixed side protections with photoelectric barriers
Software per capitelli drittiSoftware for straight capitals
Software per tagli a 45°Software for 45° cuttings
Spalle in acciaio / Muri in cemento armato 2.000 / 2.700 mm.Steel shoulders / Concrete walls 2.000 / 2.700 mm. (78.74” / 106.29“)Protezioni laterali �sse e porte anteriori scorrevoli Fixed side protections with sliding front doors
Rotazione pneumatica della testa 0° - 90°Pneumatic rotating head 0° - 90°
Inclinazione pneumatica del disco 0° - 45°Pneumatic tilting blade 0° - 45°
Estensione corsa asse Y 2.700 mm. ( 106.29” )Y axis extension 2.700 mm. ( 106.29 )
Banco di lavoro basculante con piano in legnoHydraulic tilting work table with wood surface
Banco di lavoro girevole manualeManual rotating work table
Banco di lavoro 3.400 x 2.150 mm. (133.86” x 84.64”)Work table 3.400 x 2150 mm. (133.86” x 84.64”)
Super�ce in gomma per banco di lavoroRubber surface for work table
Sistema pneumatico di ruote omnidirezionaliPneumatic system of omnidirectional wheels
Pulsantiera remotataHand remote control
Pulsantiera remotata wireless (versione UL/CSA)Wireless hand remote control (UL/CSA version)
Sistema automatico di lubri�cazioneAutomatic lubrication system
Disco 625 mm. Ø Blade 625 mm. Ø
Accessori / Accessories Optionals
Programma per tagli a 45°Program for 45° cuttings
Capitelli drittiStraight capitals
Tagli multipliMultiple cuts
Tagli diagonaliDiagonal cuts
Lavorazioni / Processings
Software 45°
La struttura monoblocco facilita le operazioni di carico, scarico,
trasporto e posa in opera.Easy to load, unload, transport and install
thanks to its monoBlock structure.
4080 - 161”
5450 - 215”
2710
- 10
7”
Spalle in acciaio / Muri in cemento armato 2.000 / 2.700 mm.Steel shoulders / Concrete walls 2.000 / 2.700 mm. (78.74” / 106.29“)Protezioni laterali �sse e porte anteriori scorrevoli Fixed side protections with sliding front doors
Rotazione pneumatica della testa 0° - 90°Pneumatic rotating head 0° - 90°
Inclinazione pneumatica del disco 0° - 45°Pneumatic tilting blade 0° - 45°
Estensione corsa asse Y 2.700 mm. ( 106.29” )Y axis extension 2.700 mm. ( 106.29 )
Banco di lavoro basculante con piano in legnoHydraulic tilting work table with wood surface
Banco di lavoro girevole manualeManual rotating work table
Banco di lavoro 3.400 x 2.150 mm. (133.86” x 84.64”)Work table 3.400 x 2150 mm. (133.86” x 84.64”)
Super�ce in gomma per banco di lavoroRubber surface for work table
Sistema pneumatico di ruote omnidirezionaliPneumatic system of omnidirectional wheels
Pulsantiera remotataHand remote control
Pulsantiera remotata wireless (versione UL/CSA)Wireless hand remote control (UL/CSA version)
Sistema automatico di lubri�cazioneAutomatic lubrication system
Disco 625 mm. Ø Blade 625 mm. Ø
Dati Tecnici / Technical Speci�cations
Corsa max. longitudinale (asse X)Max. stroke X axis
Corsa max. trasversale (asse Y)Max. stroke Y axis
Corsa max. verticale (asse Z)Max. stroke Z axis
Rotazione manuale testa (asse C)Manual rotating head (C axis)
Inclinazione manuale disco (asse A)Manual tilting blade (A axis)
Max. velocità dell’asse XMax. speed X axis
Max. velocità dell’asse YMax. speed Y axis
Max. velocità dell’asse ZMax. speed Z axis
Potenza motore disco (S6)Main motor power
Velocità rotazione discoSpeed main motor
Diametro Min. disco / Diametro foroMinimum blade diameter / Blade hole
Diametro Max. disco / Diametro foroMaximum blade diameter / Blade hole
Massima profondità di taglioMaximum cutting depth
Dimensioni banco di lavoroWork table dimensions
Massa complessiva indicativaApproximate Weight
Ingombro macchinaDimensions
Dimensioni imballoPackaging dimensions
Tensione standardStandard voltage
mm.Inch.
mm.Inch.
mm.Inch.
°
°
mt/minInch./min
mt/minInch./min
mt/minInch./min
kW/Hp
Rpm
mm.Inch.
mm.Inch.
mm.Inch.
mm.Inch.
kglb
mm.Inch.
mm.Inch.
Volt / Hz
3500137.80”
2000 (2700 opt.)78.74” (106,29 opt.)
34013.38”
0 - 90 - 180(0 - 90 pneumatic opt.)
0 ÷ 90 hand-wheel(0 - 45 pneumatic opt.)
10393“
10393“
7,5295“
13,2 / 18
700 ÷ 3000 con inverter700 ÷ 3000 with inverter
350/6013.78”/2.36”
500/60 (625 opt.) 19.68”/2.36” (24.60“ opt.)
145 (200 with 625)5.70” (7.87“ with 625”)
3400 x 1900 (2150 opt)133.86” x 74.80” (84.64 opt)
32007055
5450 x 4080 x 2710215” x 161” x 107”
5450 x 2300 x 2300214” x 91” x 91”
400 / 50230 / 60*
3500137.80”
2000 (2700 opt.)78.74” (106,29 opt.)
34013.38”
0 - 90 - 180(0 - 90 pneumatic opt.)
0 ÷ 90 hand-wheel(0 - 45 pneumatic opt.)
10393“
10393“
7,5295“
13,2 / 18
700 ÷ 3000 con inverter700 ÷ 3000 with inverter
350/6013.78”/2.36”
500/60 (625 opt.) 19.68”/2.36” (24.60“ opt.)
145 (200 with 625)5.70” (7.87“ with 625”)
3400 x 1900 (2150 opt)133.86” x 74.80” (84.64 opt)
31006834
5450 x 4080 x 2710215” x 161” x 107”
5450 x 2300 x 2300214” x 91” x 91”
400 / 50230 / 60*
Model monoBlock on shoulders
* Solo versione UL/CSA - UL/CSA version only.I dati tecnici di cui sopra e le foto contenute in questa brochure, sono da considerarsi indicativi e soggetti a variazioni senza preavviso.The above technical datas and the pictures included in this lea�et, are for general information only and they can be changed without notice.
Training
To provide innovative services, Emmedue constantly holds training courses for its operators, customers and dealers, providing them with active support to meet their needs.
Our numbers
6.000 mq of production area
Over 10.000 machines sold
Over 70 countries covered
1 branch in USA
Over 35 collaborators that with passion, constancy and determination, are working every days for the realization of this extraordinary vision of success!
Mission
Emmedue intends to consolidate its leadership among the best producers of stone processing machines, through the achievement of the following goals:
Full customer satisfaction, competitive prices, �exible solutions, highly quali�ed and solid support service.
Continuous technological innovation, essential to optimize the productivity and the supply capacity of the Company.
Full involvement of the whole sta� in achieving the winning results.
Emmedue, a brand of Industrie Montanari, was founded in the early 90s.Its founder, Mr. Al�o Montanari, an expert in precision mechanics entrepreneur with a great pioneering vision, was among the �rsts to realize bridge saws machines with monoblock structure, bringing a deep innovation in the marble’s �eld.To date, the Company occupies a prestigious position in the market, producing a wide range of highly sophisticated and technological products.
History
Vision
Men, values, ideas, participation, courage, devotion and hard work.
The family soul of a great industrial Company.
Christian and Ylenia Montanari, today at the helm of the Society, are following enthusiastically and with passion, the path set out by their father.
Proud of their roots, with an eye to the future.
Stone & TileGHENT - BELGIUM
Peculiarities and strengths of the company
Design and construction of precision mechanical parts directly inside the Company.
Accurate selection of raw materials, mostly made in Italy.
Assembly check of the components during the whole production �ow.
Testing of machines through constant and scrupulous tests.
Highly quali�ed technical service.
Remote technological support, through remote connection.
Quick and reliable after-sales service.
Widespread commercial network around the world.
Peculiarities and strengths of the company
Products
Emmedue o�ers numerous solutions in order to cut, mill and polish natural stone and agglomerates.
Emmedue can provide customized machines, from monolithic to on steel shoulders or on concrete wall versions.
The products can be subdivided into four main families:
BENCH SAWS: simpler and slimmer typical of construction works.
CNC BRIDGE SAW MACHINES: available a wide variety of models with or without manipulator.
WORKING CENTRES: with 3 o 4 interpolated axis good for pro�ling, polishing and for realizing bass-reliefs.
COMBINED MACHINES: able to perform the work both of a saw machine and of a working center.
✓✓
✓
✓
Rev.
150
119
Member of:
Dealer
Industrie Montanari S.r.l.Via Fondo Ausa, 23 • 47891 Dogana • Repubblica di San MarinoTel. (+378) 0549 908926 • Fax (+378) 0549 [email protected] • www.industriemontanari.sm
Dealer
is a brand of Industrie Montanari S.r.l.
Via Fondo Ausa, 23 - 47891 DoganaRepublic of San Marino
Tel. (+378) 0549 908926 - Fax (+378) 0549 [email protected]
Rev.
02/
2019