www.macroflex.czmacroflex@macroflex.cz

2009 - 10 - 22

Vhradn zastoupen v esk republice a na Slovensku pro:

Vlnovcov kompenztory MACOGA, S.A. Tkaninov kompenztory DIETER A. ROTH GmbH Vlnovcov hadice z nerezov oceli DIETER A. ROTH GmbH Gumov kompenztory TEGUFLEX a speciln gumov hadice Trelleborg Izarra, S.A.U. Kluzn uloen Trelleborg Izarra, S.A.U. a PIHASA, S.A. Uloen potrub PIHASA, S.A.

Kontakty:

MACROFLEX s.r.o.t. Tome Bati 1852765 02 Otrokovice

Tel: +420 577 922 904 905Fax: +420 577 922 906e-mail: macroflex.otrokovice@macroflex.cz

MACROFLEX s.r.o.Na Keku 365109 04 Praha 10 - Horn Mcholupyesk republika

Tel: +420 272 083 350 - 352Fax: +420 272 083 353e-mail: macroflex.praha@macroflex.cz

MACROFLEXKompenztory a technick prvkypro potrubn systmy

MACROFLEX

Ven ptel,

nae spolenost od roku 1995 pracuje v oblasti potrubnch systm se specilnm zamenm na kompenzan prvky a jejich aplikaci, a ji pi instalaci novch a nebo udrovn souasnch systm.V dodvkch tchto komponent spolupracujeme s adou eskch a zahraninch dodavatel, a to zejmna se spolenostmi MACOGA, S.A., Trelleborg Izarra, S.A.U., DIETER A. ROTH GmbH, PIHASA S.A.Jedn se o dodavatele certifikovan podle ISO 9001 a hledisko kvality pat mezi prioritn zjmy firemn obchodn strategie. Nae firma byla auditovan odborem zeni jakosti EZ, a. s., pro dodvky kompenztor urench pro jadern i klasick elektrrny. Splujeme ustanoven a poadavky vyhlky SKAE . 436/90 Sb. pro vrobu a dodvky vlnovcovch kompenztor zaazench do vybranch zazen jadernch elektrren. Nmi dodva-n kompenztory jsou certifikovny Institutem technick inspekce Praha a mnoha renomovanmi zahraninmi zkuebnami (TV, Bureau Veritas, Det Norske Veritas aj.) a jsou navrhovny, vyrbny a zkoueny v souladu s direktivou PED 97/23/CE Annex III., modul H.Prun se pizpsobujeme a eme konkrtn technick ppady ji ve fzi projektovn a nabzme irok vbr standardnch i nestandardnch kompenztor a dalch prvk v nejvy kvalit pi zachovn pznivch cen a dodacch lht.Jsme schopni eit i problematiku pevnostnch vpot a pepot potrubnch tras. Dokonal systm potaovho projektovni a potrubnch vpot, pokrokov vrobn procesy, peliv vbr surovin a materil, laboratorn testy a pm kontrola kvality se odr v nsledn spokojenosti uivatel.K tomuto pstupu ns pivedla snaha pedchzet ppadnm problmm pi provozu, kter mohou mt piny nap. v nekvalifikovanm pouit nebo nedostaten znalosti problematiky potrubnch dilatac. Poradenskou slubu poskytujeme v rmci dodvky bezplatn.V tomto katalogu naleznete zkladn pehled nmi dodvanch vrobk. Jedn se o:

vlnovcov kompenztory MACOGA, S.A. tkaninov kompenztory DIETER A. ROTH GmbH vlnovcov hadice z nerezov oceli DIETER A. ROTH GmbH gumov kompenztory Trelleborg Izarra, S.A.U. a speciln gumov hadice kluzn uloen Trelleborg Izarra, S.A.U, PIHASA, S.A. uloen potrub PIHASA, S.A.

Pejeme si, pokud zatm nejste nam zkaznkem, aby Vs nae nabdka zaujala a vme, e brzy vstoupte do ad naich stlch a spokojench partner.

S pozdravem

Ing. Jaromr Blobchodn editel

Ing. Petr ernochtechnick editel

MACROFLEX MACROFLEX

Kontakty

POLSKOmacroflex@macroflex.plwww.macroflex.pl

MACROFLEX s.r.o.t. Tome Bati 1852765 02 Otrokoviceesk republika

tel: +420 577 922 904 905fax: +420 577 922 906

SLOVENSK REPUBLIKAmacroflex@macroflex.skwww.macroflex.sk

MACROFLEX SLOVAKIA s.r.o.Mikovniho 4 917 01 TrnavaSlovensk republika

tel: +421 33 5936 159 +421 33 5936 237fax: +421 33 5936 054

ESK REPUBLIKAmacroflex@macroflex.czwww.macroflex.cz

MACROFLEX s.r.o.t. Tome Bati 1852765 02 Otrokoviceesk republika

tel: +420 577 922 904 905fax: +420 577 922 906

MACROFLEX s.r.o.Na Keku 365109 04 Praha 10esk republika

tel: +420 272 083 350 352fax: +420 272 083 353

MACROFLEXmacroflex@macroflex.euwww.macroflex.eu

MACROFLEX

REFERENCE

CZALSTOM POWER BRNOAMPLUSERVIS OSTRAVAAQUA - STYL PROSTJOVARCELORMITTAL OSTRAVAARMATURY GROUP KRAVAEARMEX HOLDINGATEL ENERGETIKA ZLNATMOS ENGINEERINGAXFLOW PRAHABARUM CONTINENTAL OTROKOVICEBIOCEL PASKOVBRONSWERK HEAT TRANSFERCEMENT HRANICECETETHERM PRAHACOREX PARDUBICECS CABOT VALASK MEZIESK DRORENSKESK RAFINRSKEZ, EL PRUNOVEZ, EL. DTMAROVICEEZ, EL. HODONNEZ, EL. CHVALETICEEZ, EL. POERADYEZ, EL. POEZ, EL. TISOVEZ, EL. TUIMICEEZ, JE TEMELNEZ, JE. DUKOVANYKD BLANSKOKD NOV ENERGOKD PRAHA DIZD5, TINECDALKIA RDEHTOCHEMA BITUMATDEZA VALASK MEZIDIAMODOTEC ENERGO INTERNATIONALEKOL BRNOENERGETIKA TINECENERGY ST NAD LABEMENETEX-KIA MODICEENEZA TINECENGO SERVIS OSTRAVAEUROMONT GROUP LITVNOVEVECO BRNOEXCON STEEL HRADEC KRLOVFREMENIT HODONNFRDLANTSK STROJRNYG - TEAM PROGRES TRUTNOVG.M.PROJECT OPAVAGASCONTROL HAVOVGIENGER ZLNGLANZSTOFF - BOHEMIAGLAVERBEL CZECHGRADIOR POWERG-TEAM DOBANYGVS PLAST PEROVH&D ENGINEERING PRAHAHA.EM OSTRAVAHUTN MONTE OSTRAVAHYDROSYSTEM OLOMOUCCHEMING PARDUBICE

CHEMOPROJEKT PRAHACHEPOS ENGINEERING BRNOI.B.C. PRAHAINTECHA PRAHAINTERNATIONAL POWER OPATOVICEIRICO OLOMOUCISH&MSA OLOMOUCJIHOMORAVSK ARMATURKAJI OHNT, SPALOVAC TECHNIKAJI POSD, POSAD-TECH-MONTAGEK & H KINETIC KLATOVYKAUUK KRALUPY N. VLT.KOKA BRNOKOFING PASKOVKOHUT TINECKOCH-GLITSCH BRNOKOVOHUT ROKYCANYKOVOMONT PARDUBICEKOVOPROJEKTA BRNOK-PROTOS KRALUPY N. VLT.KRLOVOPOLSK RIA BRNOKRLOVOPOLSK STROJRNAKTS HRADEC KRLOVKUNST HRANICEKUPEN MOSTLAVIMONT BRNOLETIT PRAHALIBERECK KOTLRNYLONZA BIOTEC KOUIMLUDMA TRADING FRYDEKLUKOIL BOURGASMARINSKOHORSK OSTRAVAMERO R KRALUPYMETROSTAV PRAHAMGT GROUPMICO TEBMIT METAL VSETNMODANSK POTRUBN PRAHAMODANSK SERVISN A MONTNMONDI TTMONT KARVINMORAVIA TRADE SYSTEMSMOSTECK UHELNMPSJ PRAHAOKZ HOLDINGOLBRICH - CZONDEJOVICK STROJRNAPBS BRNO DIZPBS TEBPBS VELK BTEPIVOVAR LITOVELPLZESK TEPLRENSKPLZESK PRAZDROJPOKORN BRNOPOTRUB PRAHAPRASK TEPLRENSKPRASK HRADPRECHEZA PEROVPROCTER & GAMBLEPROFIMONT HRADEC KRLOVPROKOP ENGINEERING BRNOPROMONT PARDUBICE

PROVODNSK PSKYPSP ENGINEERINGPTEK BRNOR&M UNIMONTEX MOSTRAIV LIBERECREKO PRAHAREPK OSTRAVARIHA PRAHARICHTER + FRENZEL PRAHAROCKWOOL BOHUMNRONAL CR JINRSM CHEMACRYLRTR BRNOSAINT-GOBAIN PRAHASANBORN VELK MEZISEKOS ST NAD LABEMSEVA ESK BUDJOVICESCHENCK PROCESS PRAHASCHULTE CZ UHERSK HRADITSIEMENS INDUSTRIAL TURBOMACHINERYSIGMA DIZ LUTNSIGMA GROUP LUTNSKANSKA KOICESOKOLOVSK UHELNSPOLANA NERATOVICESYNHESIA PARDUBICEKODA AUTO MLAD BOLESLAVKODA POWER PLZEKODA PRAHAKODA TRADING PLZETECHNOMONT FRDEK-MSTEKTEMO OSTRAVATENZA BRNOTEPLRNA ESK BUDJOVICETEPLRNA OTROKOVICETEPLRNA ST NAD LABEMTEPLRNY BRNOTEPLO ZLNTHERMOQUELL CZTCHAS ORLOVTITAN - PLASTIMEX JABLONEC N. NISOUTOMA OTROKOVICETOYOTA TSUSHO EUROPE PRAHATRINOM PEROVTRIVAL PRAHATINECK ELEZRNYUNIPETROL RPA LITVNOVUNITED ENERGY MOSTUNITHERM JABLONECVA TECH WABAG BRNOVAE OSTRAVAVLCOVNY PLECHU FRDEK MSTEKVHS BRNOVTKOVICE HEAVY MACHINERY OSTRAVAVTKOVICE STROJRENSTV OSTRAVAVCHZ BRNOVYSOK PECE OSTRAVAVZDUCHOTECHNIKA PEROVZLNTERMZOMAPLAST PEROVZVU HRADEC KRLOVZVVZ ENVEN MILEVSKO

MACROFLEX

PLARCELORMITTAL POLANDALMAR ZIELONA GRAARMA WARSZAWAB.I.T. CZERNICABOT ELEKTROWNIA OPOLEEBRO TRADE WARSZAWA EKO-TOP RZESZWELEKTROCIEPOWNIA CHORZWELEKTROCIEPOWNIA SIEKIERKIELEKTROWNIA RYBNIKENBIO TECHNOLOGY KOSAKOWOENERGOAPARATURA KATOWICE

ENERGO-MAR PSZCZYNAENERGOMONTA CHORZWINSTAL RZESZWINSTYTUT NAWOZW SZTUCZNYCH PUAWYJEDYNKA OPOLEMOSTOSTAL ZABRZE HOLDINGPA CONEX GOSTYNINPEC-REM POZNAPERI POCKPIW STALDAX BECHATWPKE ELEKTROWNIA KATOWICEPKN ORLEN POCK

RAFAKO RACIBRZREMPOL MIDZYRZECZREMWIL WOCAWEKROCKWOOL POLSKA CIGACICESARIA POLSKA DUGI BOREKSICES POLSKA WARSZAWAVEOLIA WATER SYSTEMS KRAKWZACHEM URC BYDGOSZCZZAKADY AZOTOWE KDZIERZYNZREW WARSZAWA

SKABB SLOVENERGIAAMYLUM SLOVAKIAAPOLLOPROJEKT BRATISLAVAARMAS KOICEARMAT SERVIS NITRAARTEKO PLUS VRANOV N/T.AWT POPRADBTG SLOVENSKO PEZINOKCELPROJEKT RUOMBEROKCEMDESIGN TRENNCEMMAC HORN SNIEDOLVAP VARNDOMOTHERM LIESEKEBO JASLOVSK BOHUNICEEDELVENT LEVICEEKOL MARTINEKOTECHNA PREOVEMO MOCHOVCEENERGOMONT TRNAVAENERGOPROJEKTY BRATISLAVAENERGOSERVIS KOICEENERGY TECHNOLOGIES ILINAENERGYCO ROAVAENERGYR PLUS MARTINENO NOVKYESOPLYN ELIEZOVCEEUROTECHNOLOGY SYSTEMS

EVO VOJANYEXMONT ENGINEERING BRATISLAVAFERMAS SL. UPAGTG BRATISLAVAHM KOICEHOLCIM ROHONKHUTN PROJEKT BRATISLAVAIDO EET LEVICEINSTOS BRATISLAVAISTROENERGO LEVICEJS TRADE B. BYSTRICAJV SERVIS MOKRKERAMOPROJEKT TRENNKOHAFLEX BANSK BYSTRICAKSB TRNAVAMEGATRADE TREBIOVMONDI BP RUOMBEROKMONTE KOICEPCL LADCEPIO CHEMPIK BRATISLAVAPOTRUB SLOVAKIAPRIMA STEEL GALANTAPROOF VENTIL B.t. PROTEO KOICEPROTOM RUOMBEROKPSP ENGINEERING PEROV

REVYMONT AARONDOM BANSK BYSTRICAS ARMAT AASAMSON COMPANY NITRASAVE ILINASENSUS ST. TURSES TLMAESIGMA SLOVAKIA B. BYSTRICASIGMATECH METALFINSIGMATECH ALASLOVAKIA TREND SOBRANCESLOVING BRATISLAVASLOVNAFT MAO BRATISLAVASMARTCONTROL ILINASMURFIT KAPPA TROVOSPP SERVIS BRATISLAVASTYLLEX BOIARSYNECTA AATECHMONTSTAV BRATISLAVATENTO ILINAUS STEEL KOICEVIPAP VIDEM KRKO SLOVINSKOVS OCEVEZ LEVICE

MACROFLEX

Kovov vlnovcov kompenztory......................................................................................................................................1 Veobecn informace ...............................................................................................................................................1.3 Pehled dodvanch typ .........................................................................................................................................1.5 Kontrola kvality a testy ..............................................................................................................................................1.11 Pokyny pro mont a bezpenostn doporuen .......................................................................................................1.12 Korekce kompenzanch schopnost ........................................................................................................................1.13 Tabulka materil ......................................................................................................................................................1.14 Stanoven maximlnho ppustnho tlaku ................................................................................................................1.15 Axiln kompenztory ...............................................................................................................................................1.16 Vpoet sil ..........................................................................................................................................................1.17 Pklady pouit ...................................................................................................................................................1.20 Vpoet pedpt axilnho kompenztoru .........................................................................................................1.21 Tabulky kompenztor MWA, MFA.....................................................................................................................1.23 Kloubov kompenztory ...........................................................................................................................................1.47 Pklady pouit ...................................................................................................................................................1.48 Tabulky kompenztor MWP, MFP.....................................................................................................................1.51 Tabulky kompenztor MWC, MFC ....................................................................................................................1.69 Laterln kompenztory ............................................................................................................................................1.85 Pklady pouit ...................................................................................................................................................1.86 Tabulky kompenztor MWL, MFL .....................................................................................................................1.87 Tabulky univerzlnch kompenztor MWD, MFD .............................................................................................1.111 Poptvkov formul .................................................................................................................................................1.119

Tkaninov kompenztory ...................................................................................................................................................2 Pouit .....................................................................................................................................................................2.3 Konstrukce ................................................................................................................................................................2.4 Pehled dodvanch typ .........................................................................................................................................2.4 Pehled materil ......................................................................................................................................................2.13 Zpsoby upevnn ....................................................................................................................................................2.15 Instrukce pro mont a provoz .................................................................................................................................2.18 Konstrukce s otevenm koncem ..............................................................................................................................2.19 Tepeln izolace .........................................................................................................................................................2.20 Poptvkov formul .................................................................................................................................................2.21

Vlnovcov hadice ................................................................................................................................................................3 Veobecn informace ...............................................................................................................................................3.3 Hadice SE 105, SE 106 ............................................................................................................................................3.5 Hadice SE 110, SE 111, SE 112 ...............................................................................................................................3.6 Hadicov koncovky ...................................................................................................................................................3.7 Hadicov koncovky - pklady ...................................................................................................................................3.15 Hadice s PTFE vlokou ............................................................................................................................................3.18 Vysokotlak hadice z PTFE ......................................................................................................................................3.19 Pokyny pro umstn a mont .................................................................................................................................3.20 Vpoty dlek hadic ..................................................................................................................................................3.22 Poptvkov formul .................................................................................................................................................3.35

Gumov kompenztory .......................................................................................................................................................4 Veobecn informace ...............................................................................................................................................4.3 Teguflex P .................................................................................................................................................................4.5 Teguflex W ................................................................................................................................................................4.7 Teguflex HP ..............................................................................................................................................................4.9 Teguflex HO ..............................................................................................................................................................4.11 Teguflex Viton ...........................................................................................................................................................4.13 Teguflex C .................................................................................................................................................................4.15 Trelleborg FFI ...........................................................................................................................................................4.17 Teguflex FFL .............................................................................................................................................................4.19 Teguflex AV ...............................................................................................................................................................4.21 Trelleborg S ..............................................................................................................................................................4.23 Instalace ...................................................................................................................................................................4.25 Chemick odolnost ...................................................................................................................................................4.29 Rozmry prub .........................................................................................................................................................4.31 Poptvkov formul .................................................................................................................................................4.33

Obsah

MACROFLEX

Kluzn uloen .....................................................................................................................................................................5 Pryov bloky s PTFE vrstvou ..................................................................................................................................5.3 MACT 4 ..............................................................................................................................................................5.5 MACT 5 ..............................................................................................................................................................5.6 Kluzn teflonov desky 2138 ....................................................................................................................................5.7 2138.1 ................................................................................................................................................................5.8 2138.2 ................................................................................................................................................................5.9 Kluzn grafito-bronzov desky 2139 ........................................................................................................................5.10 2139.1 ................................................................................................................................................................5.11 2139.2 ................................................................................................................................................................5.12 Poptvkov formul .................................................................................................................................................5.13

Uloen potrub ....................................................................................................................................................................6 vod .........................................................................................................................................................................6.3 Pehled typickch aplikac ........................................................................................................................................6.5 Pehled konstruknch prvk ....................................................................................................................................6.7 Zkladn konstrukn prvky .......................................................................................................................................6.9 2100 chyt pivaovac .......................................................................................................................................6.11 2100-I chyt pivaovac ....................................................................................................................................6.12 2101 chyt pivaovac .......................................................................................................................................6.13 2105 chyt pivaovac .......................................................................................................................................6.14 2133 Uloen pro studen potrub ......................................................................................................................6.15 21342137 Stojany s objmkou ..........................................................................................................................6.16 2138 Kluzn desky PTFE ...................................................................................................................................6.17 2139 Kluzn desky grafitobronzov ...................................................................................................................6.20 2220 Tmen zvsn ..........................................................................................................................................6.23 2221 Tmen zvsn se svornkem ...................................................................................................................6.24 2222 Tmen zvsn se svornkem ...................................................................................................................6.25 2224 Objmka se dvma rouby .........................................................................................................................6.26 2229 Objmka se temi rouby ...........................................................................................................................6.29 2240 Objmka pro svisl potrub .........................................................................................................................6.33 2251 Tmen z ploch oceli .................................................................................................................................6.36 2252 Polo-objmka .............................................................................................................................................6.37 2280 Tmen z kruhov oceli ...............................................................................................................................6.39 2297 Uloen vlekov .....................................................................................................................................6.41 22302310 Sedla ...............................................................................................................................................6.42 2321 Tye zvitov .............................................................................................................................................6.44 2325 Ty zvitov s okem ..................................................................................................................................6.45 2330 Spojka zvitovch ty ...............................................................................................................................6.46 2331 Matice napnac .........................................................................................................................................6.47 2332 Tmen kovan se zvitem .........................................................................................................................6.48 2333 Oko kovan se zvitem .............................................................................................................................6.49 2400 Opora kyvn ..............................................................................................................................................6.50 Prun uloen ..........................................................................................................................................................6.55 2500 Pruina mal .............................................................................................................................................6.57 Typ CVC, CV, CVL, CVLL - Zkladn informace .................................................................................................6.58 Grafick pehled .................................................................................................................................................6.60 Nvod na mont ...............................................................................................................................................6.62 Zkladn technick data .....................................................................................................................................6.66 Typ A ...................................................................................................................................................................6.67 Typ B ..................................................................................................................................................................6.68 Typ C ..................................................................................................................................................................6.69 Typ D ..................................................................................................................................................................6.70 Typ E ..................................................................................................................................................................6.71 Typ F ..................................................................................................................................................................6.72 Typ G ..................................................................................................................................................................6.73 Typ H ..................................................................................................................................................................6.74 Typ APV Omezova vibrac .............................................................................................................................6.75 Uloen konstantn sly ..............................................................................................................................................6.77 Zkladn informace .............................................................................................................................................6.79 Grafick pehled model ....................................................................................................................................6.82 Tabulky pro volbu velikosti ..................................................................................................................................6.83 Hydraul ick tlumie ..................................................................................................................................................6.87 vod ...................................................................................................................................................................6.89 Typ HS 24 .........................................................................................................................................................6.91 Typ HS 56 .........................................................................................................................................................6.92 Typ HS 810 .......................................................................................................................................................6.93 Typ HS 11, 15, 17 ...............................................................................................................................................6.94 Poptvkov formul .................................................................................................................................................6.95

Kluzn uloen

Soportes para Tuberas - Pipe Hangers, S.A

MACROFLEXKompenztory a technick prvkypro potrubn systmy

ENGINEERED SYSTEMS

Trelleborg Izarra, S.A.U.

5.3

MACROFLEX

Pryov bloky s teflonovou vrstvou MACT

Pouit

Jsou ureny pro pohybujc se zazen s malou rychlost pohybu. Napklad potrub, tepeln vmnky a aparty, mostn konstrukce.Jsou pouvny v teplrenstv, plynrenstv, energetice, chemickm a strojrenskm prmyslu, petroche-mii, dopravnm stavitelstv. Tedy tam, kde se vyuije jejich dlouhodob stabiln velmi nzk koeficient ten a to i za zhorench provoznch podmnek.

Materil

Zkladn komponentou je pryov blok s kovovou vnitn vztu opaten na kluznch plochch teflonovm povlakem.

Kompletace

Bloky mohou bt pipevnny na rzn typy zkladovch desek, nebo dodny bez desky. Pata kluzku nad povrchem z teflonu mus bt opatena plechem z letn nerezavjc oceli.

Tvary

Standardn jsou bloky dodvny se tvercovou zkladnou. Jin proveden na poptvku.

Parametry

- Nzk koeficient ten 0,03-0,05 (mazan povrch)- Inertn proti chemickm vlivm- Nzk pilnavost vi neistotm- Chemick stabilita teflonov vrstvy -180 C/+ 220 C

Konstrukce

V souasn dob jsou na spolenost nabzena kluzn uloen spolenosti Trelleborg-IESA typu:MACT 4, pro posuvy v osch x, y.MACT 5, pro posuv v ose x.Kluzn uloen se skld z horn a spodn sti.

Spodn st

Hlavn soust je pryov blok, kter zajiuje spojen s kluznou teflonovou plochou a souasn umouje poddajnost uloen k vyrovnn montnch nepesnost a zajiuje elektricky nevodiv oddlen.

MACT 4

Spodn st je tvoena pryovm blokem s teflonovou kluznou plochou. V ppad poteby je na spodn stran pryovho bloku pipevnna podlon ocelov deska.

MACT 5

U tohoto typu jsou teflonovou vrstvou opateny i funkn bon stny pryovho bloku, kter je doplnn ocelovou podlokou.

Horn st

Je tvoena zrcadlov letnou vrstvou antikoroznho materilu a zkladovm ocelovm plechem. Typ MACT 5 m horn st sestavenu ve tvaru U s bonmi vztuhami.Povrchov prava ocelovch st sestavy je v zkladnm proveden realizovna syntetickou hlinkovou bar-vou. Na vydn je mono povrchovou pravu pizpsobit ntrovm systmm a zvyklostem zkaznka. Povrchovou pravu lze poadovat pro prosted se ztenmi klimatickmi podmnkami.

5.4

MACROFLEX

Pryov bloky s teflonovou vrstvou MACT

Mont a drba

Pro mont obou st na msto uren je pouvn neuzaven fixan rmeek, kter nen soust dodvky. Nutn dimenze tto fixace mus bt stanoveny v projektu. elem tto voln instalace je snadn mont, kterou je nutno provdt po rektifikaci technologie a snadn ppadn vmna st uloen pokozench za provozu. Pi monti je dleit zajistit neporuenost kluznch ploch. Mont uloen se provd po odstrann provizornch montnch podloek vloenm obou st uloen do fixanho rmeku. Po monti je nutn kontrola istoty a neporuenosti stynch ploch. Obdobn se postupuje pi vmn pokozen sti kluznho uloen.

Provoz

Za provozu je nutno kluznm uloenm vnovat pi v souladu s pslunmi technickmi pedpisy platnmi pro dlo do nj jsou uloen zabudovna, (nap. SN 13 0108). Jedn se zejmna o kontroly funknosti a neporuenosti.

Zvltnosti

Poddajn podloka vyrovnv montn tolerance a zajiuje rovnobnost kluznch ploch. M rovn tlumc inek.

nosnost

do 500 kN posuv max. 300 mmdo 1000 kN 100 mmdo 1500 kN 100 mm

Velikost posuv je informativn. Je mon dohodnout jin rozsahy, poppad jin pomry podlnch a pnch posuv.

Pracovn teplota:

minimln teplota - 40 Cmaximln teplota +150 C

Pro zven tepeln odolnosti je mon doplnit horn st kluznho uloen o tepeln izolan podloky s vlastnostmi odpovdajcmi poadovanmu snen teploty.

Poznmka

Na zklad vaich poadavk poskytneme podrobnj informace a doporume, ppadn navrhneme kluzn desky s pravami podle vaich poteb.

5.5

MACROFLEX

Pryov bloky s teflonovou vrstvou MACT 4

Horn st

Ocelov deska

Plech z letn nerezov oceli

Pryov blok

Teflonov vrstva

E

Hn

Rmeek pro mont(pklad)

Ls

Ln

An

As

Spodn st

VelikostSla

svislPosuvy Rozmry

x y An Ln Hn As Ls EkN mm mm mm mm mm mm mm mm

01 100 50 50 100 100 28 220 220 1002 100 100 100 100 100 28 320 320 1003 100 150 150 100 100 28 420 420 1004 100 200 200 100 100 28 520 520 1005 100 250 250 100 100 28 620 620 10

06 200 50 50 150 150 28 270 270 1007 200 100 100 150 150 28 370 370 1008 200 150 150 150 150 28 470 470 1009 200 200 200 150 150 28 570 570 1010 200 250 250 150 150 28 670 670 10

11 500 50 50 200 200 28 320 320 1512 500 100 100 200 200 28 420 420 1513 500 150 150 200 200 28 520 520 1514 500 200 200 200 200 28 620 620 1515 500 250 250 200 200 28 720 720 15

Kluzn uloen MACT 4

5.6

MACROFLEX

Pryov bloky s teflonovou vrstvou MACT5

VelikostSla Posuv Rozmry

svisl bon x An Ln Hn As Ls E Ai LikN kN mm mm mm mm mm mm mm mm mm

01 100 10 50 100 100 28 220 230 15 150 10002 100 10 100 100 100 28 320 230 15 150 10003 100 10 150 100 100 28 420 230 15 150 10004 100 10 200 100 100 28 520 230 15 150 10005 100 10 250 100 100 28 620 230 15 150 100

06 200 20 50 150 150 28 270 280 15 200 15007 200 20 100 150 150 28 370 280 15 200 15008 200 20 150 150 150 28 470 280 15 200 15009 200 20 200 150 150 28 570 280 15 200 15010 200 20 250 150 150 28 670 280 15 200 150

11 500 50 50 200 200 28 320 350 20 250 20012 500 50 100 200 200 28 420 350 20 250 20013 500 50 150 200 200 28 520 350 20 250 20014 500 50 200 200 200 28 620 350 20 250 20015 500 50 250 200 200 28 720 350 20 250 200

Kluzn uloen MACT 5

5.7

MACROFLEX

Kluzn teflonov desky 2138

Pouit

Jsou ureny pro kompletaci loiskovch stojan pro pohybujc se zazen s malou rychlost pohybu. Napklad potrub, tepeln vmnky, aparty, mostn konstrukce a pod. Jsou pouvny v teplrenstv, plynrenstv, energetice, chemickm a strojrenskm prmyslu, petrochemii, dopravnm stavitelstv. Tedy tam, kde se vyuije jejich dlouhodob stabiln velmi nzk koeficient ten a to i za zhorench provoznch podmnek.

Materil

Zkladn komponentou je deska z PTFE.

Kompletace

Desky mohou bt pipevnny na rzn typy zkladovch desek. Pata kluzku nad povrchem z teflo-nu bv vtinou opatena plechem z nerezavjc oceli. Na vydn budou poskytnuty podklady pro proveden tto pravy, nebo me bt nabdnuto kompletn sestaven.

Parametry

- Nzk tec koeficient (0,03-0,05 mazan povrch)- Inertn proti chemickm vlivm- Nzk pilnavost vi neistotm- V rozmez teplot od -180 C do +220 C chemicky stabiln.- Nzk kehkost od vysokch po nzk teploty- Maximln pracovn zaten 10 MPa

Poznmka

Na zklad vaich poadavk poskytneme podrobnj informace a doporume, ppadn navrhneme kluzn desky s pravami podle vaich poteb. Uveden typ slou pouze jako ukzka monho een.

zkladov deska

stojan

nerezov plech

objmka

teflonov deska

5.8

MACROFLEX

Kluzn teflonov desky 2138.1

teflonov deska zkladov deska z uhlkov oceli

Velikost A B C D H Max. doporuenzaten (kN) Velikost A B C D HMax. doporuen

zaten (kN)

01 80 80 50 50 13 12,50 16 230 180 200 150 15 150,00

02 105 80 75 50 13 18,75 17 280 180 250 150 15 187,50

03 130 80 100 50 13 25,00 18 330 180 300 150 15 225,00

04 165 80 125 50 13 31,25 19 430 180 400 150 15 300,00

05 180 80 150 50 13 37,50 20 230 230 200 200 15 200,00

06 105 105 75 75 13 28,10 21 330 230 300 200 15 300,00

07 130 105 100 75 13 37,50 22 430 230 400 200 15 400,00

08 180 105 150 75 13 52,65 23 280 280 250 250 15 312,50

09 230 105 200 75 13 75,00 24 330 280 300 250 15 375,00

10 130 130 100 100 13 50,00 25 430 280 400 250 15 500,00

11 180 130 150 100 13 75,00 26 530 280 500 250 15 625,00

12 230 130 200 100 13 100,00 27 330 330 300 300 15 450,00

13 280 130 250 100 13 125,00 28 430 330 400 300 15 600,00

14 330 130 300 100 13 150,00 29 530 330 500 300 15 750,00

15 180 180 150 150 15 112,50 30 430 430 400 400 15 800,00

Poznmka Jako protideska se bn pouv hladk nerezov plech. Je mono rovn pout dal teflonovou desku. Tec koeficient je 0,05 (mazan povrch). Kluzn deska me bt pipevnna svrem k OK. Je vak nutno chrnit teflonovou vrstvu ped pokozenm. Teflonov kluzn desky mohou bt vyrobeny v rznch rozmrech, s rznou tloukou zkladov desky. Tak s rznou slou teflonov vloky. Minimln celkov tlouka je 8 milimetr. Pracovn teplota by nemla pekroit 150 C.

Doplky

- Desky mohou bt vybaveny omezovai pohybu- Vlcov nebo sfrick podloky umoujc naklnni- Speciln doplky podle poadavk zkaznka

5.9

MACROFLEX

Kluzn teflonov desky 2138.2

teflonov deska zkladov deska z uhlkov oceli

Velikost A B C D d E F G H Max. doporuen zaten (kN)01 200 130 100 100 14 170 100 13 50,00

02 250 130 150 100 14 220 100 13 75,00

03 300 130 200 100 14 270 100 13 100,00

04 400 200 300 100 14 370 140 15 13 150,00

05 260 180 150 150 18 220 140 15 112,50

06 310 180 200 150 18 270 140 15 150,00

07 410 270 300 150 18 370 190 20 15 225,00

08 510 270 400 150 18 470 190 20 15 300,00

09 330 230 200 200 23 280 180 17 200,00

10 430 230 300 200 23 380 180 17 300,00

11 530 330 400 200 23 480 230 25 17 400,00

12 380 280 250 250 23 330 230 17 312,50

13 430 280 300 250 23 380 230 17 375,00

14 530 380 400 250 23 480 280 25 17 500,00

16 450 330 300 300 27 390 270 17 450,00

16 550 450 400 300 27 490 330 30 17 600,00

17 650 450 500 300 27 590 330 30 17 750,00

Poznmka Jako protideska se bn pouv hladk nerezov plech. Je mono rovn pout dal teflonovou desku. Tec koeficient je 0,05 (mazan povrch). Standardn zpsob pichycen je rouby nebo kotevnmi rouby. Teflonov kluzn desky mohou bt vyrobeny v rznch rozmrech a slch ocelov zkladov desky a tak s rznou slou teflonov vloky. Minimln celkov tlouka je 9 milimetr. Pracovn teplota by nemla pekroit 150 C.

Doplky

- Desky mohou bt vybaveny omezovai pohybu.- Vlcov nebo sfrick podloky umoujc naklnni.- Speciln doplky podle poadavk zkaznka.

5.10

MACROFLEX

Kluzn grafito-bronzov desky 2139

Pouit

Jsou ureny pro kompletaci loiskovch stojan pro pohybujc se zazen s malou rychlost pohybu, pracujcch za vysokch provoznch teplot. Napklad potrub, tepeln vmnky, aparty apod. Jsou pouvny v teplrenstv, plynrenstv, energetice, chemickm a strojrenskm prmyslu, petrochemii, dopravnm stavitelstv.

Materil

Zkladn komponentou je votina vyrbn z bronzu a pms dalch kovovch prvk (Pb, Zn . . . ). Vkldan lubrikan elementy jsou z grafitu s obsahem malho mnostv kov, oxid kov apod.

Kompletace

Grafito-bronzov desky jsou dodvny pipevnny na zkladov desce. Pata kluzku je opatena ple-chem z nerezavjc oceli. Pokud dodvka nezahrnuje celou sestavu podpry je nutno stojan kluzku takto doplnit.Na vydn budou poskytnuty podklady pro proveden tto pravy, nebo me bt nabdnuto kompletn sestaven.

Parametry

- Nzk tec koeficient 0,04-0,09 (podle zaten)- Rychlost posuvu mus bt ni ne 2,5 m/s.- Maximln pracovn zaten je 15 MPa.- Teplotn rozmez je velmi irok a dosahuje vysokch hodnot.

Poznmka

Na zklad vaich poadavk poskytneme podrobnj informace a doporume, ppadn navrhneme kluzn desky s pravami podle vaich poteb. Uveden typ slou pouze jako ukzka monho een.

Tvary

Tento typ uloen je dodvn v rznm tvarovm proveden: tvercov, obdelnkovit, kruhov a v proveden jako loiskov vloka.

5.11

MACROFLEX

Kluzn grafito-bronzov desky 2139.1

grafito-bronzov deska zkladov deska z uhlkov oceli

Velikost A B C D H Poet desek Max. doporuenzaten (kN)01 90 90 50 50 22 1 37,50

02 115 90 75 50 22 1 56,25

03 140 90 100 50 22 1 75,00

04 190 90 150 50 22 1 112,50

05 115 115 75 75 22 1 84,35

06 140 115 100 75 22 1 112,50

07 190 115 150 75 22 1 168,75

08 240 115 200 75 22 1 225,00

09 340 115 300 75 22 2 337,50

10 140 140 100 100 24 1 150,00

11 190 140 150 100 24 1 225,00

12 240 140 200 100 24 1 300,00

13 340 140 300 100 24 2 450,00

14 190 190 150 150 24 1 337,50

15 240 190 200 150 24 1 450,00

16 340 190 300 150 24 2 675,00

17 440 190 400 150 24 2 900,00

18 240 240 200 200 26 1 600,00

19 340 240 300 200 26 2 900,00

20 440 240 400 200 26 2 1200,00

21 540 240 500 200 26 3 1500,00

Poznmka

Typick sestaven s protideskou z nerezovho plechu. V ppad, e se uloen instaluje ve vertikln poloze, pichyt se k podkladu rouby se zaputnou hlavou. Koeficient ten je ni ne 0,1. K pipojen zkladov desky k OK se nejastji pouv svaovn. Grafito-bronzov desky mohou bt vyrobeny v rznch rozmrech a slch ocelov zkladny a tak s rznou slou grafito-bronzov vloky. Minimln celkov tlouka je 15 milimetr. Pracovn teplota a do 600 C. Doplky: - Desky mohou bt vybaveny omezovai pohybu. - Vlcov nebo sfrick podloky umoujc vychylovn. - Speciln doplky podle poadavk zkaznka.

5.12

MACROFLEX

Kluzn grafito-bronzov desky 2139.2

Velikost A B C D d E F G H Poet desekMax. doporuen

zaten (kN)

01 120 90 50 50 14 90 60 22 1 37,5002 145 90 75 50 14 115 60 22 1 56,2503 170 90 100 50 14 140 60 22 1 75,0004 220 90 150 50 14 190 60 22 1 112,5005 145 115 75 75 14 115 85 22 1 84,3506 170 115 100 75 14 140 85 22 1 112,5007 220 115 150 75 14 190 85 22 1 168,7508 270 115 200 75 14 240 85 22 1 225,0009 210 140 100 100 18 170 100 24 1 150,0010 260 140 150 100 18 220 100 24 1 225,0011 310 140 200 100 18 270 100 24 1 300,0012 360 140 250 100 18 320 100 24 1 375,0013 280 190 150 150 23 230 140 26 1 337,5014 330 190 200 150 23 280 140 26 1 450,0015 430 280 300 150 23 380 180 25 26 2 675,0016 350 240 200 200 27 290 180 29 1 600,0017 400 240 250 200 27 340 180 29 2 750,0018 450 350 300 200 27 390 230 30 29 2 900,0019 550 350 400 200 27 490 230 30 29 2 1200,0020 420 290 250 250 33 350 220 29 2 937,5021 520 420 350 250 33 450 280 35 29 2 1312,5022 570 470 400 250 33 500 330 35 29 4 1500,00

Poznmka

Typick sestaven s protideskou z nerezovho plechu. V ppad, e se uloen instaluje ve vertikln poloze, pichyt se k podkladu rouby se zaputnou hlavou. Koeficient ten je ni ne 0,1. K pipojen zkladov desky k OK se nejastji pouvaj rouby nebo kotevn rouby. Grafito-bronzov desky mohou bt vyrobeny v rznch rozmrech a slch ocelov zkladny a tak s rznou slou grafito-bronzov vloky. Minimln celkov tlouka je 15 milimetr. Pracovn teplota a do 600 C. Doplky: - Desky mohou bt vybaveny omezovai pohybu. - Vlcov nebo sfrick podloky umoujc vychylovn. - Speciln doplky podle poadavk zkaznka.

grafito-bronzov deska zkladov deska z uhlkov oceli

POPTVKOV FORMUL pro kluzn uloen

Spolenost:

Adresa:

Jmno: Oddlen:

Telefon: Fax: e-mail:

Datum

SPECIFIKACE

Typ uloen (V vbr podle katalogu): Velikost: Poet ks:

MACT4 MACT5 2138.1 2138.2 2139.1 2139.2

MACT4 MACT5 2138.1 2138.2 2139.1 2139.2

MACT4 MACT5 2138.1 2138.2 2139.1 2139.2

MACT4 MACT5 2138.1 2138.2 2139.1 2139.2

MACT4 MACT5 2138.1 2138.2 2139.1 2139.2

MACT4 MACT5 2138.1 2138.2 2139.1 2139.2

Doplujc informace:

Poloha potrub: Posuvy potrub:

Horizontln Horizontln - osa x (mm) /

Vertikln Vertikln - osa z (mm) /

ikm - hel (): Laterln - osa y(mm) /

Zaten: Informace o potrub:

Zastudena (kN): Vzdlenost osy potrub od konstrukce (mm):

Zatepla (kN) Rozmr potrub D x t (mm)

Teplota potrub (C)

Tlouka izolace (mm)

Dal upesujc daje (umstn, rzy i jin negativn a nestandardn vlivy, poadavky na dokumentaci apod.):

Plohy (vkresy, schmata umstn apod.) Podpis:

Poznmka: Prosme o co nejpelivj vyplnn tohoto formule, nebo jakkoli nesprvn nebo nepln daje mohou mt negativn vliv na funknost nabzenho vrobku.

MACROFLEX

MACROFLEX s.r.o.t. Tome Bati 1852765 02 OtrokoviceTel: +420 577 922 904 905Fax: +420 577 922 906e-mail: macroflex.otrokovice@macroflex.cz

MACROFLEX s.r.o.Na Keku 365109 04 Praha 10 - Horn McholupyTel: +420 272 083 350 - 352Fax: +420 272 083 353e-mail: macroflex.praha@macroflex.cz

KatalogKluzn uloenPryov bloky s PTFE vrstvouMACT 4MACT 5

Kluzn teflonov desky 21382138.12138.2

Kluzn grafito-bronzov desky 21392139.12139.2

Poptvkov formul