magnum control valve - lenntech · commercial control valves magnum ® control valve logix™...
TRANSCRIPT
COMMERCIAL CONTROL VALVES
Magnum® Control Valve
[email protected] Tel. +31-152-610-900www.lenntech.com Fax. +31-152-616-289
COMMERCIAL CONTROL VALVES
Magnum® Control Valve
Logix™ Series • All-electronic control platform• 24-hour super-capacitor backup – no battery necessary• Remote mount kit allows programming module to be installed up to 40 feet away• Universal controller – works on all Autotrol® brand valves• Automatic capacity calculations – no math or salt tables necessary• 12-volt operation
742 Time Clock• Simple, economic electronic time clock (chronometric)• 7- or 99-day regeneration settings• Filter or conditioner setting in one control• Fully programmable cycle times• Salt setting in 1-pound increments (lbs/cu ft)• Single controller operates Autotrol 255, 263, 268, 278 models, and
Pentair Water Magnum and Magnum IT with one controller
762 Demand• Simple, economic electronic demand (volumetric)• Calendar override – 99 day• 28-day variable reserve• Filter or conditioner setting in one controller• Automatic capacity calculations• Fully programmable cycle times• Salt setting in 1-pound increments (lbs/cu ft)• Operates 255, 263, 268, 278, and Magnum IT with one controller
764 DemandSame features as the 762, plus:• Multi-tank applications (twin alternating, multi-tank parallel)• Control lockout• Remote regeneration
Controller OptionsThe Pentair Water® Magnum Control Valve is one of the most versatile valves on the market.
The Logix series offers the ultimate in control for the Magnum® valve. Simple 3-step programming and installation makes this electronic controller the industry leader.
Flow Rates (Valve Only)Service @ 15 psi (1.03 bar) drop 76 gpm (17.3 m3/hr)Backwash @ 25 psi (1.72 bar) drop 89 gpm (20.2 m3/hr)Service Cv = 19.5 (Kv = 17)Backwash Cv = 17.8 (Kv = 19.9)
Valve Connections/DimensionsTank Thread 4-inch 8 UNInlet/Outlet 2-inch: connections NPT or BSPT, Female, CPVCBrine Line 3/4-inch NPTDrain Line* 1-1/2-inch: connections for NPT or BSPT, Female, CPVCRiser Tube Diameter 1-1/2-inchRiser Installation Above top of tank 5/8-inch (±1/8-inch)Pilot Drain and Auxiliary Hydraulic Output 1/4-inch tube fitting
* Valve installed drain flow controls available (5 – 40 gpm). If higher backwash flow is needed, an external flow control will be required.
Design Specifications/RatingsValve Body ThermoplasticO-rings EPDMInjector 7 sizes available: 14, 16, 18, 21, 24, 30, 36Working Pressure 25 psi – 100 psi (1.72 bar – 6.9 bar)Water Temperature 35° – 100°F (2° – 38°C), 120°F (49°C) Ambient
OptionsTop Mount or Side Mount Configuration
Electrical Specifications Controller Operating Voltage 12 Volt – AC (Requires a transformer supplied by GE)
Input Supply Frequency 50 or 60 Hz (Controller configuration dependent)
Motor Input Voltage 12 Volt – AC
Control System Power Consumption 3 Watts average
Transformer Specifications – All Controllers All Controllers require the use of a Pentair Water supplied transformer.
Transformer Output Voltage 12 Volt – AC 400mA
Transformer Input Options 115 Volt – AC 50/60 Hz; 230 Volt – AC 50/60 Hz; 100 Volt – AC 50/60 Hz
Transformer Plug Options Indoor North American Plug Australian Plug
Outdoor North American United Kingdom Plug (UL Listed for outdoor use) Mainland Europe Plug Japanese Plug
Taiwan/Korea Plug
Additional transformers may be available – call for more information.
Specifications
Injector Performance – Magnum
COMMERCIAL CONTROL VALVES
Magnum® Control Valve
3.00
2.50
2.00
1.50
1.00
0.50
0.00
m3/hr gpm
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0.0
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
0.60
0.50
0.40
0.30
0.20
0.10
0.00
m3/hr gpm
3.00
2.50
2.00
1.50
1.00
0.50
0.00
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00
m3/hr gpm
3.50
3.00
2.50
2.00
1.50
1.00
0.50
0.00
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
1.40
1.20
1.00
0.80
0.60
0.40
0.20
0.00
m3/hr gpm
7.00
6.00
5.00
4.00
3.00
2.00
1.00
0.00
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
1.00
0.80
0.60
0.40
0.20
0.00
m3/hr gpm
10.0
8.0
6.0
4.0
2.0
0.0
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
1.00
0.80
0.60
0.40
0.20
0.00
m3/hr gpm
5.00
4.00
3.00
2.00
1.00
0.00
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00
m3/hr gpm
3.50
3.00
2.50
2.00
1.50
1.00
0.50
0.00
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
Injector 1000441For 14-inch Tanks
Injector 1000443For 18-inch Tanks
Injector 1000445For 24-inch Tanks
Injector 1000446For 30-inch Tanks
Injector 1000447For 36-inch Tanks
Injector 1000444For 21-inch Tanks
Injector 1000442For 16-inch Tanks
TOTAL BRINE DRAW RINSE TOTAL BRINE DRAW RINSE
TOTAL BRINE DRAW RINSE TOTAL BRINE DRAW RINSE TOTAL BRINE DRAW RINSE
TOTAL BRINE DRAW RINSE TOTAL BRINE DRAW RINSE
NOTE: Brine draw and rinse rates on empty tank.
3.00
2.50
2.00
1.50
1.00
0.50
0.00
m3/hr gpm
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0.0
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
0.60
0.50
0.40
0.30
0.20
0.10
0.00
m3/hr gpm
3.00
2.50
2.00
1.50
1.00
0.50
0.00
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00
m3/hr gpm
3.50
3.00
2.50
2.00
1.50
1.00
0.50
0.00
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
1.40
1.20
1.00
0.80
0.60
0.40
0.20
0.00
m3/hr gpm
7.00
6.00
5.00
4.00
3.00
2.00
1.00
0.00
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
1.00
0.80
0.60
0.40
0.20
0.00
m3/hr gpm
10.0
8.0
6.0
4.0
2.0
0.0
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
1.00
0.80
0.60
0.40
0.20
0.00
m3/hr gpm
5.00
4.00
3.00
2.00
1.00
0.00
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00
m3/hr gpm
3.50
3.00
2.50
2.00
1.50
1.00
0.50
0.00
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
Injector 1000441For 14-inch Tanks
Injector 1000443For 18-inch Tanks
Injector 1000445For 24-inch Tanks
Injector 1000446For 30-inch Tanks
Injector 1000447For 36-inch Tanks
Injector 1000444For 21-inch Tanks
Injector 1000442For 16-inch Tanks
TOTAL BRINE DRAW RINSE TOTAL BRINE DRAW RINSE
TOTAL BRINE DRAW RINSE TOTAL BRINE DRAW RINSE TOTAL BRINE DRAW RINSE
TOTAL BRINE DRAW RINSE TOTAL BRINE DRAW RINSE
3.00
2.50
2.00
1.50
1.00
0.50
0.00
m3/hr gpm
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0.0
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
0.60
0.50
0.40
0.30
0.20
0.10
0.00
m3/hr gpm
3.00
2.50
2.00
1.50
1.00
0.50
0.00
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00
m3/hr gpm
3.50
3.00
2.50
2.00
1.50
1.00
0.50
0.00
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
1.40
1.20
1.00
0.80
0.60
0.40
0.20
0.00
m3/hr gpm
7.00
6.00
5.00
4.00
3.00
2.00
1.00
0.00
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
1.00
0.80
0.60
0.40
0.20
0.00
m3/hr gpm
10.0
8.0
6.0
4.0
2.0
0.0
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
1.00
0.80
0.60
0.40
0.20
0.00
m3/hr gpm
5.00
4.00
3.00
2.00
1.00
0.00
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00
m3/hr gpm
3.50
3.00
2.50
2.00
1.50
1.00
0.50
0.00
bar
PSI 202 3.5 5 6 7.5
40 60 80 100 120
Injector 1000441For 14-inch Tanks
Injector 1000443For 18-inch Tanks
Injector 1000445For 24-inch Tanks
Injector 1000446For 30-inch Tanks
Injector 1000447For 36-inch Tanks
Injector 1000444For 21-inch Tanks
Injector 1000442For 16-inch Tanks
TOTAL BRINE DRAW RINSE TOTAL BRINE DRAW RINSE
TOTAL BRINE DRAW RINSE TOTAL BRINE DRAW RINSE TOTAL BRINE DRAW RINSE
TOTAL BRINE DRAW RINSE TOTAL BRINE DRAW RINSE
P
R
E
S
S
U
R
E
D
R
O
P
F L O W R A T E
MAGNUM C
v BAC
KWAS
H F
LOW
MAGNUM Cv SERVIC
E FLO
W
10 3020 40 50 60 10080 90700
m3/h
gpm
0 2 4 6 8 10 12 14 16 18 20 22
240
220
200
180
160
140
120
100
80
60
40
20
0
bar psi
35
30
25
20
15
10
5
0
Valve Flow Rate Characteristics
Flow Sensor OptionsInternal Turbine UnitNormal Operating Range 2 - 80 gpm (0.45 - 18.1 m3/hr)
Peak Operating Range 1 - 100 gpm (0.22 - 22.7 m3/hr)
Normal Accuracy Range ±3%
External Flow Meter – 2.0 InchNormal Operating Range* 5.0 - 225 gpm (0.50 - 51.0 m3/hr)
Normal Accuracy Range ±3%
Connections 2-inch: connections NPT or BSPT, Female, CPVC
*Recommended maximum continuous duty flow rate of 2-inch turbine is 70% of maximum flow rate.
Tank Adapter OptionsThreaded Stainless Steel 4-inch 8 UN
Flanged Stainless Steel 6-inch
Magnum Cv C&I Valve (1-1/2 inch inlet)
COMMERCIAL CONTROL VALVES
Magnum® Control Valve
1-1/2-inch Magnum Cv 2-inch Magnum IT
3.993 (10.14 cm)
6.493 (16.5 cm)
7.500 (19.05 cm)
22.796 (57.90 cm)
2.817 (7.15 cm)
4.018 (10.20 cm)
8.680 (22.04 cm)
9.000 (22.86 cm)13.481 (34.24 cm)
19.500 (49.53 cm)
7.000 (17.78 cm)
14.000 (35.56 cm)
15.539 (39.47 cm)
1.113 (2.82 cm)
11.471 (29.13 cm)
15.53 91.113
11.376
4.42 9
13.4819.000
9.750
7.000 6.500
16.250
8.710
3.9982.817
27.224
13.993 4.429
DRAIN
AUX.
4.500
4.500
Magnum Valve Outline Dimensions
3.993 (10.14 cm)
6.493 (16.5 cm)
7.500 (19.05 cm)
22.796 (57.90 cm)
2.817 (7.15 cm)
4.018 (10.20 cm)
8.680 (22.04 cm)
9.000 (22.86 cm)13.481 (34.24 cm)
19.500 (49.53 cm)
7.000 (17.78 cm)
14.000 (35.56 cm)
15.539 (39.47 cm)
1.113 (2.82 cm)
11.471 (29.13 cm)
15.53 91.113
11.376
4.42 9
13.4819.000
9.750
7.000 6.500
16.250
8.710
3.9982.817
27.224
13.993 4.429
DRAIN
AUX.
4.500
4.500
