mastip mx nozzle

of 2 /2
MX Nozzle Technology Operation Wide moulding window Excellent temperature profile and thermal stability Operates at low moulding pressure and temperature Optimum cycle times due to superior thermal insulation Uses an advanced micro coil heater with integrated heat deflection tube Installation and Maintenance Front loading capability for easier servicing of tips, heaters and thermocouples Simple machining and installation requirements Improved reliability due to the use of advanced materials Common tip and nut options provide ready availability of spare parts Mould Design Efficiently designed profile to allow closer cavity pitching Shares the same gate profiles as BX and SX Available in both thermal and valve gate options Consistent nozzle lengths across the range Ability to mould large parts with smaller nozzles due to optimum flow characteristics Low moulding temperature and pressure, excellent temperature consistency and front loading capabilities, that’s the Mastip MX nozzle, specifically designed for multi cavity manifold systems and hot halves. The MX nozzle is suited for small to medium applications in all types of markets. It is able to process a wide range of plastics, from the easy ethylenes to tough engineering resins. © Copyright Mastip Technology Limited. Information subject to alteration. V2.01

Upload: hales

Post on 21-Jul-2016

230 views

Category:

Documents


2 download

DESCRIPTION

 

TRANSCRIPT

Page 1: Mastip MX nozzle

MX Nozzle Technology

Operation

• Widemouldingwindow• Excellenttemperatureprofileandthermalstability• Operatesatlowmouldingpressureandtemperature

• Optimumcycletimesduetosuperiorthermalinsulation

• Usesanadvancedmicrocoilheaterwithintegratedheatdeflectiontube

Installation and Maintenance

• Frontloadingcapabilityforeasierservicingoftips,heatersandthermocouples

• Simplemachiningandinstallationrequirements• Improvedreliabilityduetotheuseofadvancedmaterials

• Commontipandnutoptionsprovidereadyavailabilityofspareparts

Mould Design

• Efficientlydesignedprofiletoallowcloser cavitypitching

• SharesthesamegateprofilesasBXandSX• Availableinboththermalandvalvegateoptions• Consistentnozzlelengthsacrosstherange• Abilitytomouldlargepartswithsmallernozzlesduetooptimumflowcharacteristics

Lowmoulding temperatureandpressure,excellent temperatureconsistencyand front loadingcapabilities,that’stheMastipMXnozzle,specificallydesignedformulticavitymanifoldsystemsandhothalves.

TheMXnozzleissuitedforsmalltomediumapplicationsinalltypesofmarkets.Itisabletoprocessawiderangeofplastics,fromtheeasyethylenestotoughengineeringresins.

©CopyrightMastipTechnologyLimited.Informationsubjecttoalteration.V2.01

Page 2: Mastip MX nozzle

Mastip Regional Office Europe

Phone: +33 4 724 72 800 Fax: +33 4 724 72 801 Email: [email protected]

Mastip Regional Office China

Phone: +86 21 644 77838 Fax: +86 21 644 77828 Email: [email protected]

Mastip Regional Office North America

Phone: +1 262 644 9400 Fax: +1 262 644 9402 Email: [email protected]

Mastip Head Office New Zealand

558 Rosebank Road Avondale, Auckland, New Zealand PO Box 90651, Victoria Street West, Auckland 1142, New Zealand Phone: +64 9 970 2100 Fax: +64 9 970 2070 Email: [email protected] © Copyright Mastip Technology Limited. Information subject to alteration.

MX Nozzle Technology

40-002-004 V2.01

*40-002-004*

Availability

13 Series

16 Series

19 Series

L 45

55

65

75

95

115

145

175

A/F 24 26 36

d2 28 30 40

L4 12 15

Allmeasurementsareinmillimetres

Gating Options

Multi-HoleTorpedo Tip

One-HoleTorpedo Tip

Open Tip

Extended Tip

Valve Gate Torpedo Tip

Valve Gate Open Tip

Open Nut

Bush Nut

Sprue Nut

L

L4

d2

A/F