materiales avalados por la nsr-10 - normas astm

MATERIALES AVALADOS POR LA NSR-10(Literales F.2.1.5 - F.4.1.2 - F.4.5.3 - F.4.8.2 - F.5.2)

APLICACIÓN NORMA ASTM TÍTULO

A36/A36M JIS SS400 EN S275 BS 4360 43A 17100 St 44-2 Standard specification for Carbon Structural Steel

A529/A529M Standard specification for High-Strength Carbon-Manganese Steel of Structural Quality

A572/A572M Standard specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

A588/A588M

A709/A709M Standard specification for Structural Steel for Bridges

A913/A913M

A992/A992M Standard specification for Structural Steel Shapes

A1043/A1043M Standard specification for Structural Steel with Low Yield to Tensile Ratio for use in Buildings

Tubería Estructural

A500

A501 Standard specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

A618/A618M

A847/A847M

Tubería Circular A53/A53M Gr.B

Planchas

A36/A36M Standard specification for Carbon Structural SteelA242/A242M Standard specification for High-Strength Low-Alloy Structural Steel

A283/A283M Standard specification for Low and Intermediate Tensile Strenght Carbon Steel Plates

A514/A514M



A588/A588M


A852/A852M

A1011/A1011M

A1043/A1043M Standard specification for Structural Steel with Low Yield to Tensile Ratio for use in Buildings

Barras Planas

A36/A36M Standard specification for Carbon Structural Steel




Láminas

A606/A606M

A1011 SS, HSLAS y HSLAS-F

A6/A6M

A216/A216M Gr.WCB-S11

A668/A668M Standard specification for Steel Forgings, Carbon-Alloy, for General Industrial Use

Pernos

A307

A325/A325M

A354

A449 Standard Specification for Quenched and Tempered Steel Bolts and Studs

A490/A490M

F1852

F2280

TuercasA194/A194M

A563/A563M Standard Specification for Carbon and Alloy Steel Nuts

ArandelasF436/F436M Standard Specification for Hardened Steel Washers

F844 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

F959/F959M

A36/A36M Standard specification for Carbon Structural Steel

A193/A193M

A354

A449 Standard Specification for Quenched and Tempered Steel Bolts and Studs


EQUIVALENCIA NORMA Japanese Industrial Standards JIS

EQUIVALENCIA NORMAS Europäische Normen EN

EQUIVALENCIA NORMAS British

Standards BS

EQUIVALENCIA NORMAS Deutsches Institut für

Normung DIN

Perfiles estructurales laminados en caliente

Standard specification for High-Strength Low-Alloy Structural Steel, up to 50ksi (345MPa) Minimum yield Point, with Atmospheric Corrosion Resistance

Standard specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, produced by Quenching and Self-Tempering process

Standard specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in rounds and shapes

Standard specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing

Standard specification for Cold-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing with improved Atmospheric Corrosion Resistance

Standard specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

Standard specification for High-Yield-Strenght, Quenched and Tempered Alloy Steel Plate, Suitable for Welding


Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick

Standard specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strenght Low-Alloy, High-Strenght Low-Alloy with improved Formability, and Ultra-High-Strength

Standard specification for Steel, Sheet and Strip, High-Strenght, Low-Alloy, Hot-Rolled and Cold-Rolled, with improved Atmospheric Corrosion Resitance


Perfiles estructurales pesados laminados en

caliente o armados (aletas de espesor superior a 38mm y placas de espesor superior a 50mm)

Standard specification for General Requirments for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

Fundición y piezas forjadas de acero

Standard specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service

Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

Indicadores directos de tensión tipo Arandela

CompresibleStandard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

Pernos de anclaje y barras roscadas

Standard specification for Alloy-Steel and Stainless Steel bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners


APLICACIÓN NORMA ASTM TÍTULOEQUIVALENCIA NORMA Japanese Industrial Standards JIS

EQUIVALENCIA NORMAS Europäische Normen EN

EQUIVALENCIA NORMAS British

Standards BS

EQUIVALENCIA NORMAS Deutsches Institut für

Normung DIN

A588/A588M

F1554 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength- Fasteners for Use in Structural Applications, Includes Supplement- Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding- Specification For Low-alloy Steel Electrodes For Shielded Metal Arc Welding

- Specification for Carbon Steel Electrodes and Fluxes for Submerged-Arc Welding

- Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding

- Carbon Steel Electrodes for Flux Cored Arc Welding

- Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding

- Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding

- Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding

- Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding

- Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding

- Welding Consumables - Gases and Gas Mixtures for fusion welding and Allied Processes

Conectores tipo espigo - Structural Welding Code-Steel

A36/A36M Standard specification for Carbon Structural SteelA242/A242M Standard specification for High-Strength Low-Alloy Structural Steel

A572 Standard specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

A283/A283M Standard specification for Low and Intermediate Tensile Strenght Carbon Steel Plates


A606

A500

A847

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Pernos de anclaje y barras roscadas


Metal de aporte y fundente para

soldadura

Perfiles de lámina formada en frío

A1011/A1011M SS Gr. 30, 33, 36 tipos 1 y 2, 40, 45, 50 y 55


A1011/A1011M HSLAS Clase 1 y 2 Gr. 45, 50, 55, 60, 65 y 70

A1011/A1011M HSLAS-F Gr. 50, 60, 70 y 80

A588/A588M (345Mpa hasta 100mm (4") de espesor)


Standard specification for Steel, Sheet and Strip, High-Strenght, Low-Alloy, Hot-Rolled and Cold-Rolled, with improved Atmospheric Corrosion Resitance

A653/A653M SS Clase 1 y 3 Gr. 33, 37, 40 y 50 Standard specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated

(Galvannealed) by the Hot-Dip ProcessA653/A653M HSLA Tipo A y B Gr. 40, 50, 60, 70 y 80

A792 Gr. 33, 37, 40 y 50 Clase 1

Standard specification for Steel Sheet, 55% Aluminium-Zinc Alloy-Coated by the Hot-Dip Process

Standard specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in rounds and shapes

A1008 SS Gr. 25, 30, 33 Tipos 1 y 2, y 40 Tipos 1 y 2

Standard specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High Strength Low-Alloy, High-Strength Low-Alloy with improved Formability, Solution Hardened, and Bake Hardenable

A1008 HSLAS Clases 1 y 2 Gr. 45, 50,55, 60, 65 y 70

A1008 HSLAS-F Gr. 50, 60, 70 y 80

Standard specification for Cold-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing with improved Atmospheric Corrosion Resistance

A875 SS Gr. 33, 37, 40 y 50 Clase 1 y 3 Standard specification for Steel Sheet, Zinc-5?% Aluminium Alloy-Coated by the Hot-Dip

ProcessA875 HSLAS Tipos A y B Gr. 50, 60, 70 y 80

A1003 ST Gr. 50H, 40H, 37H, 33H

Standard specification for Steel Sheet, Carbon, Metallic-and Nonmetallic-Coated for Cold-Formed Framing Members

A1039 SS Gr. 40, 50, 55, 60, 70 y 80

Standard specification for Steel, Sheet, Hot-Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process

Aleaciones de Aluminio tratadas en caliente

ISO 209-1: Aleaciones trabajadas de aluminio y de aluminio - composición Química y formas de productos - la Parte 1: Composición química. Especifica las definiciones y el acomodamiento químico. Da reglas para redondear, para la determinación del cumplimiento (A de anexo) y guía para designaciones de la ISO (B de anexo). Edición 1989. Estado: retirada.

Aleaciones de Aluminio no tratadas en caliente


NORMA NTC EQUIVALENTE

materiales avalados por la nsr-10 - normas astm

Documents