mf-1001 mf-501 mh-15m - nikon metrology · a compact, single-shaft counter for exclusive use with...
TRANSCRIPT
En
100-8331 東京都千代田区丸の内3-2-3 富士ビル
www.nikon.co.jp/
100-8331 東京都千代田区有楽町1-12-1 (新有楽町ビル)
www.nikon.co.jp/
100-8331 東京都千代田区有楽町1-12-1 (新有楽町ビル)
www.nikon.co.jp/
www.nikon.com/
Fuji Bldg., 2-3, Marunouchi 3-chome, Chiyoda-ku, Tokyo 100-8331, Japan
NIKON CORPORATION
www.nikon.com/
Fuji Bldg., 2-3, Marunouchi 3-chome, Chiyoda-ku, Tokyo 100-8331, Japan
NIKON CORPORATION
www.nikon.com/
Fuji Bldg., 2-3, Marunouchi 3-chome, Chiyoda-ku, Tokyo 100-8331, Japan
NIKON CORPORATION
http://www.nikonusa.com/
1300 Walt Whitman Road, Melville, N.Y. 11747-3064, U.S.A.phone: +1-631-547-8500; +1-800-52-NIKON (within the U.S.A. only)fax: +1-631-547-0306
NIKON INSTRUMENTS INC.
http://www.nikonusa.com/
1300 Walt Whitman Road, Melville, N.Y. 11747-3064, U.S.A.phone: +1-631-547-8500; +1-800-52-NIKON (within the U.S.A. only)fax: +1-631-547-0306
NIKON INSTRUMENTS INC.
www.nikon.com/
Fuji Bldg., 2-3, Marunouchi 3-chome, Chiyoda-ku, Tokyo 100-8331, Japan
NIKON CORPORATION
www.nikon.com/
Fuji Bldg., 2-3, Marunouchi 3-chome, Chiyoda-ku, Tokyo 100-8331, Japan
NIKON CORPORATION
DIGITAL LENGTHMEASURING
SYSTEM
DIGIMICROMF-1001 / MF-501 / MH-15M
DIGIMICRO
MF-1001 + MFC-101A Counter
MF-1001 + TC-101A Counter
Specifications
MF-501 + MFC-101A Counter
MH-15M + TC-101A Counter
MF-1001 + MFC-101A counter + MS-21 MF-1001 + TC-101A counter + MS-21
MF-501 + MFC-101A counter + MS-11C MH-15M + TC-101A counter + MS-5C
Readings from 1µm to 0.01µm; Extreme Accuracy Guaranteed
Accessories
Printer
Counters
MFC-101AA compact, single-shaft counter for exclusive use with MF-501 and MF-1001. Offers display and resolution switching, directing switching, and display unit switching functions. The MFC-101A can be used attached to the head or placed next to equipment.
TC-101ASmallest readable value is 0.01um. The TC-101A counter can be used with older digital micrometers and rotary encoders.
System Diagram
MF-9PConnects to MFC-101A and TC-101A counters, and not only prints, but also performs statistical calculations, judges pass or reject, and creates histograms, all with simple key operations, permitting highly efficient data processing.
* MFC-101A counter placed next to equipment (optional cord is necessary to connect)
Dust Bellows
Specifications
Protects head spindle of the digital micrometer head from dust and dirt, increasing the equipment lifetime.
Measurement attachmentsStandard measurement
attachmentPin
attachmentFlat
attachmentPlastic
attachment Off-centerattachment
Rollerattachment
Measurement stands
MS-11C MS-21 MS-31G MS-4G MS-5C
MF-501 + TC-101A Counter
MF-501 + TC-101A counter + MS-11C
Digital micrometermain unit
MF-1001 MFC-101Acounter*1
*2
*3
*4
Computer, etc.
TC-101Acounter
MF-501
MH-15M
Display External output
*1 MF extension cable 2m (option) Extension cable is not necessary if MFC-101A is to be attached to digital micrometer head.*2 MU/TC connection cable (option) *3 MFC/TC RS-232C output cable 2m for exclusive use with personal computer (option)*4 MFC/TC output cable 1m for exclusive use with printer (option)
Custom printerMF-9P
RS-232C
Printer output
Main unit + counter MF-1001 + MFC-101A MF-1001 + TC-101A MF-501 + MFC-101A MF-501 + TC-101A MH-15M + TC-101AMeasurement range 0-100 mm 0-50 mm 0-15 mm
Minimumreadable value
0.1µm; can be switched to 0.5µm or 1µm
0.01µm; can be switched to 0.05µm, 0.1µm,
1µm, or 5µm
0.1µm; can be switched to 0.5µm or 1µm
0.01µm;can be switched to 0.05µm, 0.1µm, 1µm, or 5µm
Accuracy (20˚C) 3µm 1µm 0.7µmResponse speed 500 mm/sec. or less 100 mm/sec. or less
Measuring forceDownward 1.225 to 1.813N
(variable to about 0.441N), lateral 0.637 to 1.225NDownward 1.127 to 1.617N
(variable to about 0.294N), lateral 0.637 to 1.225N
Upward 0.245N, downward 0.637N, lateral 0.441N * With lifting release
External output RS-232C and dedicated printer outputOperating temperature 0 to +40˚CWeight (main unit) Approx. 480g Approx. 310g Approx. 220g
Specifications
Display 7-segment LED (green); 8 digits (including - sign); zero blanking; floating minus sign
Minimum readable value 0.1µm (can be switched to 0.5µm or 1µm)
Other functions
ResetError alarm (excess speed, etc.)RS-232C outputDedicated printer output
Input power supply Dedicated AC adapter (12V 350 mA)
Ambient temperature Operating temperature: 0 to +40 ˚CStorage temperature: -20 to +60 ˚C
Compatible micrometers MF-501, MF-1001
Dimensions (mm) 80 (W) X 60 (H) X 25.5 (D) [32.2 (D) with connectors]
Weight Approx. 95g
Specifications
Display 7-segment LED (green); 10 digits (including - sign); zero blanking; floating minus sign
Minimum readable value 0.01µm (can be switched to 0.05µm, 0.1µm, 0.5µm, 1µm, or 5µm)
Other functions
Reset/preset/pulse check Error alarm (excess speed, etc.) RS-232C outputDedicated printer output
Input power supply Dedicated AC adapter (12V 2.5A)
Ambient temperature Operating temperature: 0 to + 40 ˚CStorage temperature: -20 to + 60 ˚C
Compatible micrometers MF-501, MF-1001, previous micrometers MU Series, rotary encoders
Dimensions (mm) 150 (W) X 67 (H) X 176 (D)
Weight Approx. 980 kg (excluding AC adapter)
SpecificationsPrinting method Thermal line printing
Characters 36 x 24 dots (enlargement), 24 x 16 dots (standard)
Printing speed Approx. 0.8 second per line
Power supply AC 100V, 50/60 Hz with 6V-2A AC adapter, or 4 alkaline (LR6), or Ni-MH AA batteries. Manganese batteries cannot be used.
Operating temperature 0 to +45˚C (with AC adapter), 10 to +45˚C (with batteries)
Dimensions (mm) 94 (W) x 201 (D) x 75.2 (H)
Weight 390g (main body only)
Printouts
Mode 0: measurements; pass/reject judgment. Mode 1: measurements; pass/reject judgment; number of data; maximum value; minimum value; range; average value; standard deviation; number of defective products; percent defective; process capability index; histogram. Mode 2: mode 1 + D chart. Mode 3: control limit data for the creation of control charts. All Modes: date and time
Processing capacity Mode 0: 100,000 data. Modes 1, 2: 9,999 data. Mode 3: sample size 10 x sub-group 9,999 = 99,990 data
Output function Pass/reject judgment output
Timer input 0.3 second, 1 second, 5 seconds, 30 seconds, 1 minute, 30 minutes, 60 minutes
Standard accessories AC adapter; 1 roll of recording paper (total length 48m)*Connection cable is an option.
Platform material Stage dimensionsMS-11C Ceramics 110 x 110 mmMS-21 Steel 150 x 150 mmMS-31G* Granite 120 x 180 mmMS-4G Granite 400 x 300 mmMS-5C Ceramics ø100 mm
* It is also possible to place the object being measured on a large platform, and make measurements using the lower surface as a reference.
DIGIMICRO
MF-1001 + MFC-101A Counter
MF-1001 + TC-101A Counter
Specifications
MF-501 + MFC-101A Counter
MH-15M + TC-101A Counter
MF-1001 + MFC-101A counter + MS-21 MF-1001 + TC-101A counter + MS-21
MF-501 + MFC-101A counter + MS-11C MH-15M + TC-101A counter + MS-5C
Readings from 1µm to 0.01µm; Extreme Accuracy Guaranteed
Accessories
Printer
Counters
MFC-101AA compact, single-shaft counter for exclusive use with MF-501 and MF-1001. Offers display and resolution switching, directing switching, and display unit switching functions. The MFC-101A can be used attached to the head or placed next to equipment.
TC-101ASmallest readable value is 0.01um. The TC-101A counter can be used with older digital micrometers and rotary encoders.
System Diagram
MF-9PConnects to MFC-101A and TC-101A counters, and not only prints, but also performs statistical calculations, judges pass or reject, and creates histograms, all with simple key operations, permitting highly efficient data processing.
* MFC-101A counter placed next to equipment (optional cord is necessary to connect)
Dust Bellows
Specifications
Protects head spindle of the digital micrometer head from dust and dirt, increasing the equipment lifetime.
Measurement attachmentsStandard measurement
attachmentPin
attachmentFlat
attachmentPlastic
attachment Off-centerattachment
Rollerattachment
Measurement stands
MS-11C MS-21 MS-31G MS-4G MS-5C
MF-501 + TC-101A Counter
MF-501 + TC-101A counter + MS-11C
Digital micrometermain unit
MF-1001 MFC-101Acounter*1
*2
*3
*4
Computer, etc.
TC-101Acounter
MF-501
MH-15M
Display External output
*1 MF extension cable 2m (option) Extension cable is not necessary if MFC-101A is to be attached to digital micrometer head.*2 MU/TC connection cable (option) *3 MFC/TC RS-232C output cable 2m for exclusive use with personal computer (option)*4 MFC/TC output cable 1m for exclusive use with printer (option)
Custom printerMF-9P
RS-232C
Printer output
Main unit + counter MF-1001 + MFC-101A MF-1001 + TC-101A MF-501 + MFC-101A MF-501 + TC-101A MH-15M + TC-101AMeasurement range 0-100 mm 0-50 mm 0-15 mm
Minimumreadable value
0.1µm; can be switched to 0.5µm or 1µm
0.01µm; can be switched to 0.05µm, 0.1µm,
1µm, or 5µm
0.1µm; can be switched to 0.5µm or 1µm
0.01µm;can be switched to 0.05µm, 0.1µm, 1µm, or 5µm
Accuracy (20˚C) 3µm 1µm 0.7µmResponse speed 500 mm/sec. or less 100 mm/sec. or less
Measuring forceDownward 1.225 to 1.813N
(variable to about 0.441N), lateral 0.637 to 1.225NDownward 1.127 to 1.617N
(variable to about 0.294N), lateral 0.637 to 1.225N
Upward 0.245N, downward 0.637N, lateral 0.441N * With lifting release
External output RS-232C and dedicated printer outputOperating temperature 0 to +40˚CWeight (main unit) Approx. 480g Approx. 310g Approx. 220g
Specifications
Display 7-segment LED (green); 8 digits (including - sign); zero blanking; floating minus sign
Minimum readable value 0.1µm (can be switched to 0.5µm or 1µm)
Other functions
ResetError alarm (excess speed, etc.)RS-232C outputDedicated printer output
Input power supply Dedicated AC adapter (12V 350 mA)
Ambient temperature Operating temperature: 0 to +40 ˚CStorage temperature: -20 to +60 ˚C
Compatible micrometers MF-501, MF-1001
Dimensions (mm) 80 (W) X 60 (H) X 25.5 (D) [32.2 (D) with connectors]
Weight Approx. 95g
Specifications
Display 7-segment LED (green); 10 digits (including - sign); zero blanking; floating minus sign
Minimum readable value 0.01µm (can be switched to 0.05µm, 0.1µm, 0.5µm, 1µm, or 5µm)
Other functions
Reset/preset/pulse check Error alarm (excess speed, etc.) RS-232C outputDedicated printer output
Input power supply Dedicated AC adapter (12V 2.5A)
Ambient temperature Operating temperature: 0 to + 40 ˚CStorage temperature: -20 to + 60 ˚C
Compatible micrometers MF-501, MF-1001, previous micrometers MU Series, rotary encoders
Dimensions (mm) 150 (W) X 67 (H) X 176 (D)
Weight Approx. 980 kg (excluding AC adapter)
SpecificationsPrinting method Thermal line printing
Characters 36 x 24 dots (enlargement), 24 x 16 dots (standard)
Printing speed Approx. 0.8 second per line
Power supply AC 100V, 50/60 Hz with 6V-2A AC adapter, or 4 alkaline (LR6), or Ni-MH AA batteries. Manganese batteries cannot be used.
Operating temperature 0 to +45˚C (with AC adapter), 10 to +45˚C (with batteries)
Dimensions (mm) 94 (W) x 201 (D) x 75.2 (H)
Weight 390g (main body only)
Printouts
Mode 0: measurements; pass/reject judgment. Mode 1: measurements; pass/reject judgment; number of data; maximum value; minimum value; range; average value; standard deviation; number of defective products; percent defective; process capability index; histogram. Mode 2: mode 1 + D chart. Mode 3: control limit data for the creation of control charts. All Modes: date and time
Processing capacity Mode 0: 100,000 data. Modes 1, 2: 9,999 data. Mode 3: sample size 10 x sub-group 9,999 = 99,990 data
Output function Pass/reject judgment output
Timer input 0.3 second, 1 second, 5 seconds, 30 seconds, 1 minute, 30 minutes, 60 minutes
Standard accessories AC adapter; 1 roll of recording paper (total length 48m)*Connection cable is an option.
Platform material Stage dimensionsMS-11C Ceramics 110 x 110 mmMS-21 Steel 150 x 150 mmMS-31G* Granite 120 x 180 mmMS-4G Granite 400 x 300 mmMS-5C Ceramics ø100 mm
* It is also possible to place the object being measured on a large platform, and make measurements using the lower surface as a reference.
EnThis brochure is printed on recycled paper made from 40% used material.Printed in Japan (1710-03)T Code No. 2CE-IWDH-9
100-8331 東京都千代田区丸の内3-2-3 富士ビル
www.nikon.co.jp/
100-8331 東京都千代田区有楽町1-12-1 (新有楽町ビル)
www.nikon.co.jp/
100-8331 東京都千代田区有楽町1-12-1 (新有楽町ビル)
www.nikon.co.jp/
www.nikon.com/
Fuji Bldg., 2-3, Marunouchi 3-chome, Chiyoda-ku, Tokyo 100-8331, Japan
NIKON CORPORATION
www.nikon.com/
Fuji Bldg., 2-3, Marunouchi 3-chome, Chiyoda-ku, Tokyo 100-8331, Japan
NIKON CORPORATION
www.nikon.com/
Fuji Bldg., 2-3, Marunouchi 3-chome, Chiyoda-ku, Tokyo 100-8331, Japan
NIKON CORPORATION
http://www.nikonusa.com/
1300 Walt Whitman Road, Melville, N.Y. 11747-3064, U.S.A.phone: +1-631-547-8500; +1-800-52-NIKON (within the U.S.A. only)fax: +1-631-547-0306
NIKON INSTRUMENTS INC.
http://www.nikonusa.com/
1300 Walt Whitman Road, Melville, N.Y. 11747-3064, U.S.A.phone: +1-631-547-8500; +1-800-52-NIKON (within the U.S.A. only)fax: +1-631-547-0306
NIKON INSTRUMENTS INC.
www.nikon.com/
Fuji Bldg., 2-3, Marunouchi 3-chome, Chiyoda-ku, Tokyo 100-8331, Japan
NIKON CORPORATION
www.nikon.com/
Fuji Bldg., 2-3, Marunouchi 3-chome, Chiyoda-ku, Tokyo 100-8331, Japan
NIKON CORPORATION
Dimensions (Unit: mm)
Specifications and equipment are subject to change without any notice or obligation on the part of the manufacturer. October 2017.
WARNING
TO ENSURE CORRECT USAGE, READ THE CORRESPONDING MANUALS CAREFULLY BEFORE USING YOUR EQUIPMENT.
©1998-2017 NIKON CORPORATIONN.B. Export of the products* in this brochure is controlled under the Japanese Foreign Exchange and Foreign Trade Law. Appropriate export procedure shall be required in case of export from Japan.*Products: Hardware and its technical information (including software)
Micrometer head
Dust bellows (50mm,100mm)Measurement attachments
Measurement stands
30.8ø5
ø5
ø5
ø1.5
R1.2
Stroke 105 120 154396 Cable length
(300 )(17)
42
30.8 Stro
ke: a
ppro
x. 1
6
For
100m
m
For
50m
m
137.
585
19
23.5
ø5
Stroke 52 62232
10176.5
25.539
24
45
Release button
R 1.6
Release clamp screwLifting release length (500)
Cable length (1500)
Lift leve r
Measurement attachment
Cable length(200 )+30
-10+30-10
(17)(1
4)
25
20
4
9
ø25
ø34
120 175
85
68
□110
315
~21
180
5
M2.5 X 0.45M2.5 X 0.45
ø5
ø3 ø1.5
14
2520
4
3
6
(9)
11
11
20
68.5
127.
5
R1.5
(5)
4
9
M2.5 X 0.45ø5
ø8
ø8ø5
ø24
M2.5 X 0.45 M2.5 X 0.45 M2.5 X 0.45
Plastic
5±0.5
(17)
ø25
ø50
170 250
□150100
125 446
~29
811
0
ø34
ø25
120 180
133
68
85
305
50~
231
ø8
ø50100
225160
ø100
94
48~
173
291
65
ø50
ø25
400 300
233113
140
7548
6
349
Standard measurementattachment
MF-1001
MS-11C MS-21 MS-31G
MS-5C MS-4G
MF-501 MH-15M
Pin attachment Plastic attachment Off-center attachment Roller attachment Flat attachment
ø30
42 23.5
44.4
44.4
ø25
ø8h6 0-0.009
-0.0
28-0
.007
ø25 -0
.028
-0.0
07
NIKON CORPORATIONShinagawa Intercity Tower C, 2-15-3, Konan, Minato-ku, Tokyo 108-6290, Japanphone: +81-3-6433-3703 fax: +81-3-6433-3784 http://www.nikon.com/products/industrial-metrology/
NIKON INSTECH CO., LTD.Shinagawa Intercity Tower C, 2-15-3, Konan, Minato-ku, Tokyo 108-6290phone: +81-3-6433-3701 fax: +81-3-6433-3784
NIKON METROLOGY, INC.12701 Grand River Avenue, Brighton, MI 48116 U.S.A.phone: +1-810-220-4360 fax: +1-810-220-4300E-mail: [email protected]://us.nikonmetrology.com/http://www.nikoninstruments.com/
NIKON METROLOGY EUROPE NVGeldenaaksebaan 329, 3001 Leuven, Belgiumphone: +32-16-74-01-00 fax: +32-16-74-01-03E-mail: [email protected]://www.nikonmetrology.com/
NIKON INSTRUMENTS (SHANGHAI) CO., LTD.CHINA phone: +86-21-6841-2050 fax: +86-21-6841-2060(Beijing branch) phone: +86-10-5831-2028 fax: +86-10-5831-2026(Guangzhou branch) phone: +86-20-3882-0552 fax: +86-20-3882-0580
NIKON SINGAPORE PTE LTDSINGAPORE phone: +65-6559-3651 fax: +65-6559-3668
NIKON MALAYSIA SDN BHDMALAYSIA phone: +60-3-7809-3688 fax: +60-3-7809-3633
P.T. NIKON INDONESIAINDONESIA phone: +62-267 8643949 fax: +62-267 8643950
NIKON SALES (THAILAND) CO., LTD.THAILAND phone: +66-2633-5100 fax: 66-2633-5191
NIKON INSTRUMENTS KOREA CO., LTD.KOREA phone: +82-2-2186-8400 fax: +82-2-555-4415
NIKON INDIA PRIVATE LIMITEDINDIA phone: +91-124-4688500 fax: +91-124-4688527
NIKON CANADA INC.CANADA phone: +1-905-602-9676 fax: +1-905-602-9953
NIKON INSTRUMENTS S.p.A.ITALY phone: +39-055-300-96-01 fax: +39-055-30-09-93
NIKON METROLOGY UK LTD.UNITED KINGDOM phone: +44-1332-811-349 fax: +44-1332-639-881E-mail: [email protected]
NIKON METROLOGY SARLFRANCE phone: +33-1-60-86-09-76 fax: +33-1-60-86-57-35E-mail: [email protected]
NIKON METROLOGY GMBHGERMANY phone: +49-6023-91733-0 fax: +49-6023-91733-229E-mail: [email protected]
ISO 14001 Certifiedfor NIKON CORPORATION
ISO 9001 Certifiedfor NIKON CORPORATIONIndustrial Metrology Business Unit