mina nasr -c.v-
TRANSCRIPT
![Page 1: Mina Nasr -C.V-](https://reader030.vdocuments.pub/reader030/viewer/2022020103/589a3c211a28ab8c588b5651/html5/thumbnails/1.jpg)
Mina Nasr
Mobile :( 002)01208966872 E-mail: [email protected]
1 Profile: Mina Nasr
C.V
Mina Nasr Shaleh Botros
Summary
Electrical Engineer 4+ years of Electrical field on various levels and looking for Utility management support. Willing to work in an environment with team where there is a ample opportunities to learn and execute my knowledge.
Objective:
To seeking a Position to utilize my skills and abilities in the Multi National Company that offers Professional growth while being resourceful, innovative and flexible.
Work Experience
COMBI EGYPT COMPANY
From (1/6/2016 Until now)
My Direct responsibilities are:-
1. Electrical Maintenance for all
compressors and dryers.
2. Installation of new compressors and
dryers
3. Installation of new components and
fittings.
4. Dealing with emergencies, unplanned
problems and repairs.
Personal Data
Date of Birth:01/08/1990
Mobile :(002)01208966872
Address: Alvarouguih Building-
Gesr Elsuez- Cairo.
Email:[email protected]
Military Service: Completed
Marital Status :Single
Nationality: Egyptian
Driving License: Egyptian & Saudi
Passport No: A12336724
Valid Up to:06/06/2021
National ID: 29008012505051
![Page 2: Mina Nasr -C.V-](https://reader030.vdocuments.pub/reader030/viewer/2022020103/589a3c211a28ab8c588b5651/html5/thumbnails/2.jpg)
Mina Nasr
Mobile :( 002)01208966872 E-mail: [email protected]
2 Profile: Mina Nasr
Kholi Group (Saudi Building Technic Construction &
Maintenance CO.LTD)
Diplomatic Quarter in Saudi Arabia(D.Q): Project
FFrroomm ((11//1111//22001144 TToo 11//44//22001166 ))
Electrical site engineer :Position
My Direct responsibilities was:-
1. Study of drawing and execute the work.
2. To provide the entire electrical solutions as per requirement.
3. Design for illumination of different area and lux calculation.
4. To check the entire work as according to approved drawings.
5. Handling of electrical load as per requirement.
6. Cable size calculation cable scheduling &its route selection ,over
head or underground.
7. Review inspection reports and records of Quality Control carried
out on completed and running Project activities.
8. Review Client’s Inspectors deliverables, analyses and resolve
issues and problems emerging during the Quality Control
activities. Ensure that all inspection and tests witnessed by clients
9. Drawing submission and get Approval from consultants
10.Site issues highlighting and send to consultant
11.Updating the Drawing depends on site condition
12.Daily & Weekly work Progress Report Preparation and Keep the
Record
Masr Café Company (Egypt)
From: (3-3-2014 To 20/11/2014)
![Page 3: Mina Nasr -C.V-](https://reader030.vdocuments.pub/reader030/viewer/2022020103/589a3c211a28ab8c588b5651/html5/thumbnails/3.jpg)
Mina Nasr
Mobile :( 002)01208966872 E-mail: [email protected]
3 Profile: Mina Nasr
Position: Maintenance and Automation Engineer
My Direct responsibilities was:
1-Schedule and undertake periodic maintenance on all electrical
equipment, components, and installations.
2-Provide prompt response to inquiries whenever there is a breakdown,
and resolve the issue as quickly as possible
3- Ensure that equipments are in good working order so as to prevent
disruption of activities
4-Installation of fresh electrical components and fittings
5-Replacement for old or faulty electrical components
6-Assist in forecasting requirements, creating a budget and scheduling
expenses for the electrical department
7-Keep record of all stock and supplies, including company’s electrical
equipment
8-Working in collaboration with the production team to formulate the
best cost-effective manufacturing process
9-Ensure that all electrical gadgets and instruments are switched off
after close of work daily
10-Fix and maintain lighting fixtures and fittings
During Military Service I worked as an engineer in the field of contracting and distribution of electricity lighting in the armed forces during the performance of my military service and participated in many projects.
Academic Profile:
2007- 2012
B.S.C: Faculty of Engineering (Assuit University, July 2012). Major: Electric Power and Machines Department.
![Page 4: Mina Nasr -C.V-](https://reader030.vdocuments.pub/reader030/viewer/2022020103/589a3c211a28ab8c588b5651/html5/thumbnails/4.jpg)
Mina Nasr
Mobile :( 002)01208966872 E-mail: [email protected]
4 Profile: Mina Nasr
Fourth year grade: Very Good. Cumulative grade: Good .
Graduation Project : power system distribution of medium and low voltage
Graduation Project Grade: Excellent.
2004-2007
Higher Secondary School from Mustafa Omar Hassanein in Assuit -Percentage of Score 96%.
The Study included:
1. Electrical control in the machines.
2. Power system analysis.
3. AC machine, DC machine and special machine.
4. Generation plants and economic operation.
5. Electrical drive in the machines.
6. Switchgears and protection in the power system.
7. Power electronics and practical application.
Courses:
1. Design & Installation of Electrical works in construction field
(QEC Center)
Course Contents:
a) General Knowledge about construction works.
b) How to design project
![Page 5: Mina Nasr -C.V-](https://reader030.vdocuments.pub/reader030/viewer/2022020103/589a3c211a28ab8c588b5651/html5/thumbnails/5.jpg)
Mina Nasr
Mobile :( 002)01208966872 E-mail: [email protected]
5 Profile: Mina Nasr
c) How to use advanced Electrical Programs ( Auto cad –
Dialux – Etap).
d) How to prepare and review the construction Drawings
(Shop drawing).
e) Executing and inspecting the Electrical Works.
f) How to design light current works.
2. Classic Control : Electutors Center
3. PLC Step7-200: Salesian institude "DonBosco"
4. AutoCAD(2D): Electutors Center
5. Dialux for lighting Design :Electrutors Center
6. Electric Installation : Electutors Center
7. Power System Distribution : Jelecom
8. ICDL: Assuit University
Previous Training
1 July. 2011 - 30 July. 2011 inTechnical Personal training sector
Electricity Distribution in Assiut.:
- Distribution transformer oil and dry type
- Protection, Distribution Panels
- Meters
- Power, Control and special Cables
- How to control Electrical network
27 Sep2011-5Jan in Industrial Training Council (ITC) of the
Ministry of Commerce and Industry in Assiut:
- Passed the training course in Step 7 PLC
![Page 6: Mina Nasr -C.V-](https://reader030.vdocuments.pub/reader030/viewer/2022020103/589a3c211a28ab8c588b5651/html5/thumbnails/6.jpg)
Mina Nasr
Mobile :( 002)01208966872 E-mail: [email protected]
6 Profile: Mina Nasr
- Training in Assiut Petroleum Company.
Computer Skills
Operating systems: Windows XP, Windows 7 & 8
Applications : Well –versed in MS –office(MS Excel,MS Word
&MS power point)
Technical Skills
All type of Electrical Equipment's installations and Maintenance
and Telecommunications Equipment's Installations and
maintenance work.
Languages:
Arabic : Native English : Very good writing and speaking Personality:
- Interactive and fast enough to learn new Technologies and
sciences.
- Excellent ability to establish relationships and connection within
the scope of work.
- The ability to work as one team.
- Working and Making decision under high Pressure.
- Good research abilities and problem –solving skills.
- I used to put my Plan, Targets and try hard to achieve them.
- Very good at (Chess, Ping -Pong), shopping.
- Communication workshops, Presentation Skills workshops.
- Charity Works.
It Is Honor For Me To Work At Your Company