minimatic fittingsclippard.ltd/wp-content/uploads/2019/09/barb_fitting.pdf · minimatic barb...

MINIMATIC® FITTINGS

Part No. Barb (I.D.) Material

#10-32 Female CF2 1/16” ENP Brassto Barb CF3 3/32” ENP Brass CF4 1/8” ENP Brass

#10-32 Female S3F 3/32” ENP Brassto Barb Swivel S4F 1/8” ENP Brass

Barb-to-Barb C22 1/16-1/16” ENP Brass C32 1-16-3/32” ENP Brass C42 1/16-1/8” ENP Brass C33 3/32-3/32” ENP Brass C43 3/32-1/8” ENP Brass C44 1/8-1/8” ENP Brass

Barb-to-Barb S33 3/32” ENP BrassSwivel S44 1/8” ENP Brass

1/8” NPT S4N 1/8” ENP BrassFemale Swivel

1/8” NPT 15055* 1/8” BrassMale Swivel *Not to be used as a constant rotation junction

NPT Male NPT 12844 1/8” (1/8 NPT) BrassFlush Fitting 12845 1/4” (1/4 NPT) Brass

Requires thread sealant.


#3-56 Male to 11750-2 1/16” Brass1/16” Barb

#10-32 Male to 11752-5 1/16” BrassSingle Barb, 11752-8 3/32” Brass1/4" Hex 11752-4 1/8” Brass CT2 1/16” ENP Brass CT3 3/32” ENP Brass CT4 1/8” ENP Brass

#10-32 Male to 11752-2 1/16” BrassMulti-Barb, 11752-3 1/8” Brass1/4" Hex 11752-1 1/8” Brass

#10-32 Male to 11792-5 1/16” BrassBarb, 1/4” Hex 11792-8 3/32” Brass(Capt. O-Rings) 11792-4 1/8” Brass

#10-32 Male to 11782-5-ENP 1/16” ENP BrassBarb, 5/16” Hex 11782-4-ENP 1/8” ENP Brass(Capt. O-Rings)

#10-32 Male 12841 1/16” BrassFlush to Barb 12843 3/32” Brass 12842 1/8” Brass

#10-32 Male to ST3 3/32” ENP BrassBarb Swivel ST4 1/8” ENP Brass 15045* 1/8” Brass

*Not to be used as a constant rotation junction

All barbs are noted in I.D.

Material Part No. O.D. I.D.

Nitrile 11761-2 0.240 0.150FKM 11761-8 0.240 0.150Nylon 11761-4 0.307 0.192EPDM 11761-7 0.240 0.150

GASKETS

Designed for use with #10-32 threads

Minimatic barb fittings provide a flexible, easy alternative to ferrule and push-to-connect design fittings. Electroless nickel plating provides corrosion resistance in applications involving high moisture. Nitrile gasket included with #10-32 threads except when ordered in bulk.

• In stock and ready to ship

• Low cost

• Miniature size provides low profile

• Holds to the burst pressure of polyurethane hose

• Low leak potential

MINIMATIC® BARB CONNECTORS

Fittings & Tubing182

877-245-6247 | clippard.com



#10-32 Male TT0-202 1/16” ENP Brassto Barb TT0-303 3/32” ENP Brass TT0-402 1/8”-1/16” ENP Brass TT0-404 1/8” ENP Brass

#10-32 Male UTO-2002 1/16” ENP BrassUniversal UTO-3002 1/16-3/32” ENP Brass UTO-3003 3/32” ENP Brass UTO-4002 1/8-1/16” ENP Brass UTO-4003 1/8-3/32” ENP Brass UTO-4004 1/8” ENP Brass

#10-32 Male UTO-F0F - ENP BrassUniversal

#10-32 Male ST0-2002 1/16” ENP BrassSwivel ST0-3003 3/32” ENP Brass ST0-4004 1/8” ENP Brass

1/4” NPT Male SP0-2002 1/6” ENP BrassSwivel SP0-3003 3/32” ENP Brass SP0-4004 1/8” ENP Brass

Barb-to-Barb T22-2 1/16” ENP Brass T42-2 1/16 - 1/16 - 1/8” ENP Brass T22-3 1/16 - 3/32 - 1/16” ENP Brass T22-4 1/16 - 1/8 - 1/16” ENP Brass T42-4 1/16 - 1/8 - 1/8” ENP Brass T33-2 3/32 - 1/16 - 3/32” ENP Brass T33-3 3/32” ENP Brass T33-4 3/32 - 1/8 - 3/32” ENP Brass T44-2 1/8 - 1/16 - 1/8” ENP Brass T44-3 1/8 - 3/32 - 1/8” ENP Brass T44-4 1/8” ENP Brass

Barb-to-Barb S40-4004 1/8” ENP BrassSwivel

All barbs are noted in I.D.


#10-32 Male CT0-2 1/16” ENP Brassto Barb CT0-3 3/32” ENP Brass CT0-4 1/8” ENP Brass

#10-32 Male UT0-2 1/16” ENP Brassto Barb UT0-3 3/32” ENP BrassUniversal UT0-4 1/8” ENP Brass

#10-32 Female CF0-2 1/16” ENP Brassto Barb CF0-3 3/32” ENP Brass CF0-4 1/8” ENP Brass

Universal UTO-F ENP Brass#10-32

#10-32 Male to ST0-2 1/16” ENP BrassBarb Swivel STO-3 3/32” ENP Brass ST0-4 1/8” ENP Brass

1/8” NPT Male SP0-2 1/16” ENP Brassto Barb Swivel SP0-3 3/32” ENP Brass SP0-4 1/8” ENP Brass

1/8” Barb-to- S40-4 1/8” ENP BrassBarb Swivel

Hose/Tubing Size. The use of different sizes of hose or tubing in your circuits deserves some care and consideration. In general, follow the manufacturer’s guide for the size of hose/tubing you use. For air logic circuits, we recommend 1/16” ID for pilots and 1/8” ID for supplies and outputs.

Tightening #10-32 Fittings. TIGHTEN WITH CARE. Often a “finger tight” connection between Clippard fittings with anaerobic sealant is all that is required. When using a gasket, most Clippard #10-32 threaded fittings require no more than 9 inch-pounds of torque to seal. We recommend that this force not be exceeded. Use wrench #11770 with a 1/4” and 5/16” open-end.

Swivel Fittings. Minimatic swivel connector fittings are very efficient in applications where joints need to be disconnected and reconnected frequently. Made with a threaded connection on one end and a swivel connection on the other, these fittings provide a true cost savings on pneumatic circuit designs. They are valuable also where short lengths of hose are being connected. Note: These are not rotating joints. They are for assembly benefits… Not as a constant rotation connection.

MINIMATIC® ELBOW BARB FITTINGS MINIMATIC® #10-32 BRANCH TEES

FITTING

S & TU

BIN

G

877-245-6247 | clippard.com 183

http://clippard.com



#10-32 Male XT2-202 1/16” ENP Brassto Barb XT4-202 1/16 - 1/8 - 1/16” ENP Brass XT3-303 3/32” ENP Brass XT2-402 1/8 - 1/16 - 1/16” ENP Brass XT2-404 1/8 - 1/16 - 1/8” ENP Brass XT4-402 1/8 - 1/8 - 1/16” ENP Brass XT4-404 1/8” ENP Brass

Universal #10-32 UTF-2002 1/16” ENP Brassto Barb UTF-3003 3/32” ENP Brass UTF-4002 1/8 - 1/16” ENP Brass UTF-4004 1/8” ENP Brass

Universal UTF-FOF - ENP Brass#10-32

Barb-to-Barb X22-202 1/16” ENP Brass X32-202 1/16 - 1/16 - 1/16 - 3/32” ENP Brass X42-202 1/16 - 1/16 - 1/16 - 1/8” ENP Brass X44-202 1/16 - 1/8 - 1/16 - 1/8” ENP Brass X44-402 1/16 - 1/8 - 1/8 - 1/8” ENP Brass X33-202 3/32 - 1/16 - 3/32 - 1/16” ENP Brass X33-303 3/32” ENP Brass X44-303 3/32 - 1/8 - 3/32 - 1/8” ENP Brass X43-303 3/32 - 3/32 - 3/32 - 1/8” ENP Brass X42-402 1/8 - 1/16 - 1/16 - 1/8” ENP Brass X44-404 1/8” ENP Brass

MINIMATIC® CROSS FITTINGS Part No. Material

#10-32 Male 15453 StainlessNipple Steel

#10-32 Male 11999 BrassNipple

#10-32 Female 15004 BrassHex Coupling

#10-32 15010 BrassExtension Fitting

#10-32 15040 BrassSwivel Fitting

1/8” NPT Male 15060 Brassto #10-32 Swivel Adapter

1/8” NPT Female 15050 Brassto #10-32 Swivel Adapter

#10-32 NIPPLES & COUPLINGS

Part No. Porting Material

#3-56 11749-1 In-Line BrassCouplings 11749-2 T Brass 11749-3 X Brass

#10-32 “X” 15002-5 X BrassCoupling

#10-32 to 15002-2 L Brass#10-32 Fittings 15002-3 T Brass 15002-4 X Brass

Adjustable 15002-1 L Brass and #10-32 “L” stainless steelFitting

MINIMATIC® L, T, X FITTINGS Part No. Porting Material

Adjustable 15002-6 T Brass and#10-32 “T” stainless steelFitting

Miniature 12292 - Stainless#10-32 Manifold SteelStud

1/8” NPT to 15090-1 L Brass#10-32 Adapter 15090-2 T BrassFittings 15090-3 X Brass

Fittings & Tubing184

877-245-6247 | clippard.com



#10-32 Male to TT2-2 1/16” ENP BrassBarb TT2-4 1/16 - 1/8” ENP Brass TT3-3 3/32” ENP Brass TT4-2 1/8 - 1/16” ENP Brass TT4-4 1/8” ENP Brass

#10-32 Male to ST2-2 1/16” ENP BrassBarb Swivel ST3-3 3/32” ENP Brass ST4-4 1/8” ENP Brass

Universal UTF-2 1/16” ENP Brass#10-32 to Barb UTF-3 3/32” ENP Brass UTF-4 1/8” ENP Brass

MINIMATIC® #10-32 RUN TEES Part No. Barb(s) Material

Universal UTF-F - ENP Brass#10-32

1/8” NPT SP2-2 1/16” ENP BrassMale to Barb SP3-3 3/32” ENP Brass SP4-4 1/8” ENP Brass

Barb-to-Barb S42-2 1/8", 1/16", 1/16” ENP BrassSwivel S44-4 1/8” ENP Brass

SCREW PLUGS


1/16” Barb to 1CJ2 1/16” BrassMale NPT 2CP2 1/8” Brass 4CQ2 1/4” Brass 6CW2 3/8” Brass 8CZ2 1/2” Brass



1/8” Barb to 11924-1 1/8” Brass1/8” Male NPT

MINIMATIC® NPT TO BARB CONNECTORS

Part No. External Thd. Internal Thd.

Pipe Reducer 1CJF 1/16” NPT #10-32Bushings 2CPF 1/8” NPT #10-32 4CQF 1/4” NPT #10-32 6CWF 3/8” NPT #10-32 8CZF 1/2” NPT #10-32 2CPK 1/8” NPT 1/16” NPT 4CQK 1/4” NPT 1/16” NPT 6CWK 3/8” NPT 1/16” NPT 8CZK 1/2” NPT 1/16” NPT 4CQN 1/4” NPT 1/8” NPT 6CWN 3/8” NPT 1/8” NPT 8CZN 1/2” NPT 1/8” NPT 6CWY 3/8” NPT 1/4” NPT 8CZY 1/2” NPT 1/4” NPT 8CZD 1/2” NPT 3/8” NPT Pipe Reducer 15036 1/8” NPT #10-32Bushing

MINIMATIC® PIPE REDUCERS

Will adapt standard pipe to fittings and Clippard miniature components. (-ENP) optional.

COMPRESSION FITTINGS

#10-

32 th

d.

0.69

4 (1

7.6)

0.15

6 (4

.0)

3/8”

he

x.

o-rin

g se

al

BULKHEAD FITTINGS

FITTING

S & TU

BIN

G

Part No. Material

#10-32 Thread 11755 BrassScrew Plugs 11755-ENP ENP Brass 11782-7-ENP Capt. O-Ring ENP Brass 0035-2 Stainless

Part No. External Thd. Internal Thd.

Bulkhead 15027 #15/32-32 #10-32Fittings 15029-1 3/4-20 1/8” NPT 15029-2 3/4-20 1/4” NPT

Part No. Tube (O.D.) Material

#10-32 to Tube 11923 1/8” BrassFittings with 15160 1/16” Brass Capt. O-Rings

NPT to Tube 3810-1 1/8” BrassFittings 3810-2 1/16” Brass

877-245-6247 | clippard.com 185

http://clippard.com

minimatic fittingsclippard.ltd/wp-content/uploads/2019/09/barb_fitting.pdf · minimatic barb...

Documents