mold flow analysis

��

��

��

��

��

��

ABSABS : Polylac PA-709 (Chi Mei)

��

��

��

!��"#��

��

��"#��

� ��"#�$�"%�%"��

��"#�$�"%��%�� &"

��

8.42mm

4.76mm

��

Packing Conditions:&%��'

Mold temperature : 50 deg.C

Melt temperature: 225 deg.C

Injection time : 4.825 sec

Part volume to be filled : 901.436 cm^3

Cooling Conditions:

Coolant temp.: 25℃

Sprue/runner/gate volume to be filled :3.637 cm^3

Total projected area : 972.628 cm^2

��

The filling time is 4.825s.Red region indicates thepart is filled lastly.

��

Red is lastly filled

��

The maximum fillingpressure is 13267psi

��

The flow front temperature distribute evenlyin most regions.

�� A i r t r a p s

Air traps are shown by magenta points.

�� W e l d l i n e s

Weld lines are shown by darker lines.

�� Pressure and clamp force

�� Deformatiom –All direction_1

Max. Deflection, all effects Deflection, About 1.480 ~ 0.084 mm

�� Deformatiom –All direction_2

Max. Deflection, all effects Deflection, About 1.480 ~ 0.084 mm

�� Deformatiom –X direction

Max. Deflection, all effects X Component, About 1.032 ~ -1.170mm

�� Deformatiom –Y direction

Max. Deflection, all effects Y Component, About 1.430 ~ -0.701mm

�� Deformatiom –Z direction_1

Max. Deflection, all effects Z Component, About 0.6076 ~ -0.5104mm

mold flow analysis

Documents