montare bujii beru

Upload: melody-cotton

Post on 01-Mar-2018

218 views

Category:

Documents


0 download

TRANSCRIPT

  • 7/26/2019 Montare Bujii Beru

    1/2

    Glow plug body with 10-digit number.Two important rules for the replacementof glow plugs: 1. Only use OEM uality glow plugsas offered by !eru" #. $f the %ehicle manufacturer

    stipulates glow plugs with post-heating&you should only use glow plugs with themar'ing (G)("*hat you should ta'e note of duringfitting: 1. +irt around the thread must not fallinto the combustion chamber under anycircumstances. #. The glow plugs and the connectingnuts must be tightened to the correcttorue. $n case of e,cessi%e tightening

    torue& the glow plug may be damaged.This can result in irreparable damage tothe plug destruction of connecting pinor o%erheating due to reduction of theannular gap./itting the glow plug with a toruewrench$t is imperati%e that you obser%e themanufacturers stipulations.ttention 2 obser%e ma,imumtightening torue: 3 Gewinde M 4: 10 )m 3 Gewinde M 5: 1# )m 3 Gewinde M 10: 16 )m 3 Gewinde M 1#: ## )m/itting the glow plug if a torue wrenchis not a%ailable7crew in glow plug until it contacts theengine bloc'. Tighten appro,. 809 usinga suitable tool.Our tip: To be able to underta'e the wor'properly and correctly& we recommendthe purchase of a torue wrench.Tightening the nut on the electricalconnection:The ma,imum tightening torue used onthe connecting nut must not e,ceed thefollowing %alues: on M thread ma,. #)m&

    Glow corp plug cu num;r de 10 cifre.+ou; reguli importante pentru i numai bu=ii incandescentede calitate OEM a?a cum sunt oferite de!eru"

    #. @n caAul

  • 7/26/2019 Montare Bujii Beru

    2/2

    Product finder our %ehicle

    Model TypeModel

    yearPower output

    Cc /

    Cyl.

    Fenault B$O $$ !!0H1H#I&B!0H1H#I

    1.6 dBi!HB!04 0J.#001 - J0 '* H 4# D7 1J1 H

    can be fitted with the following original !EFK brand products:

    Product Type Code designation Type designation Order No.

    Glow Dlug G) G) 014 - 0 100 ##J 8L8

    $nstallation $nformation: Bo%er glow plug thread and -shaft with mounting grease& G/01 - Order )o. 0 450 800 08& before fitting to enable easier remo%al and pre%entcorrosion.Tightening Torue N)m 16/ailure Moment N)m 86Dort Type P mmBone Ditch J89/itting +epth Nmm #6O%erall ength Nmm 45Thread 7iAe M 10,17panner 7iAe 10 mm

    Glow Dlug Type Dencil-type Glow DlugGlow Dlug Type fter-glow capableQoltage NQ 11

    erial - 110 7 - 0 J0 00 110

    Fitting Position Dacheinbau

    Bable ength Nmm 00Outer Thread Nmm M Jength Ncm 1Operating Mode Electronic

    ll information sub=ect to change

    http://www.beru.com/english/produkte/gluehkerzen/dreiphasen.phphttp://www.beru.com/english/produkte/antennen.phphttp://www.beru.com/english/produkte/gluehkerzen/dreiphasen.phphttp://www.beru.com/english/produkte/antennen.php