motor om 444 la liebherr lhm 400

Upload: liebherr

Post on 30-May-2018

269 views

Category:

Documents


1 download

TRANSCRIPT

  • 8/14/2019 Motor Om 444 La Liebherr Lhm 400

    1/2

    LHM 400LiebherrHarbour Mobile Crane

    The synergy of wide experience, research and development for yoursuccess and benefit

  • 8/14/2019 Motor Om 444 La Liebherr Lhm 400

    2/2

    Liebherr Harbour Mobile Cranes,Type LHM 400

    Fhigh performanceFhigh reliability and qualityF low operational cost

    Funsurpassed mobility and flexibilityFworldwide service network

    Load diagram Propping base LHM 400

    Technical data

    80999

    291412/01Subecttochan

    ewithoutnotice.

    LIEBHERR-WERK NENZING GMBH, P.O. Box 10, A-6710 Nenzing / Austria / EuropeTelephone: (+43) 5525-606-363

    Telefax: (+43) 5525-606-53

    Email: [email protected]

    Internet: www.liebherr.com

    Presented by:

    Radius craneoperation 75%

    motor graboperation

    four rope graboperation

    (m) (t) (t) (t)

    10.5222324252627

    282930313233343536373839404142434445464748

    104.0104.099.995.090.486.382.5

    79.075.172.268.966.363.961.259.156.854.652.850.949.347.645.944.643.141.740.439.137.9

    43.343.343.343.343.343.343.3

    43.343.343.343.343.343.343.342.040.438.837.536.235.133.832.631.730.729.728.727.827.0

    34.734.734.734.734.734.734.7

    34.734.734.734.734.734.734.734.734.734.734.734.734.733.832.631.730.729.728.727.827.0

    Capacities 2-rope operation 70 t or 104 t

    4-rope operation 104 t

    Engine Mercedes Benz, type OM 444 LA 605 kW at 1900 rpm

    Working speeds hoisting / lowering max. 90 m/min

    slewing max. 1.6 rpm

    average luffing speed 41 m/min

    travelling 0 - 5.4 km/h

    Weight total crane approx. 390 t

    Undercarriage number of axle sets standard 16

    maximum number of axle sets 24

    number of steerable axle sets all

    number of driven axle sets 6

    can be increased on request

    Hoisting height above quay at minimum radius 45m

    above quay at maximum radius 30m

    below quay 15m

    Propping base support base 12m x 12m