msm group · msm group, kasrensk 8, 911 05 trenn, slovak republic, msm group, kasrensk 8, 911 05...

MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk

MSM GROUPMSM GROUP Ltd. was established in 2015 by transformation of MSM Martin Ltd., which dealt with construction, development, production and sales mainly with military material. MSM Martin Ltd. was founded in 2004 on the base of MSM Ltd. In next years the MSM Martin Ltd. took over several military companies located in the middle of Slovakia, and built on its traditional manufacturing activities in military and civil production.

Due to ZVS company inclusion into the group structure we can state that the origin of MSM GROUP Ltd. comes back to 1927 when then Škoda Works in Plzeň, as a monopoly producer of ammunition technics decided to build so called „spare factory“ in Slovakia. The company was totally destroyed during the World War II, and it took several years while the production was restored to such extend, that its products were supplied not only for the Ministry of National Defense, but for many countries worldwide as well.

Today the MSM GROUP Ltd. makes use of rich experiences from the past and know-how of highly qualified workers and vast archive of technical documentation for all necessary procedures.

In 2009 the biggest Czech military holding EXCALIBUR ARMY entered MSM as a co-owner.

Why to cooperate with us:More than 70 years experiences in the ammunition development, production and complete services in this field. Long tradition in the MSM locations for the ammunition production processes with significant effects as the deep skilled personal, support industries, development fields, education etc.

The resources and the competence to cover whole ammo life cycle:

1. Development of the product and the production process included complete documentation2. Engineering construction of product including the prototype production and the pre-

serial testing3. Production line, tools and jigs engineering construction, and production4. Production of various types of small, middle and large caliber ammunition and associated

charges, fuses and primers for guns and cannons. Deliveries with all of necessary documentation, and certificates

5. Services during the ammo life cycle: Testing, Revision, Modernization, Life cycle prolongation, Disassembly, Ecological disposal

6. In the case also the production line development, production and the transfer with whole necessary technical support to customer plant

7. Services for military vehicles including the diagnostics (Tanks, Armoured vehicles, Self-propelled gun systems, ...)

Design, development, manufacturing and servicing of the radio navigation systems (NDB) for air traffic control. Repairing and modernization of various kinds of Armed Forces equipment in the segment of air defence equipment.

More information at www.msm.sk

2

ABOUT US

MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk

Ammo Production and Industry: ZVS Dubnica nad Váhom: Production of various types of small, middle and large caliber ammunition and associated charges, fuzes and primers for guns and cannons. Also transfer of technology for production, testing and assembly of the ammunition including variety of components.Industry production of welded construction, metal and metal sheet processing and also the transformators production.

Military vehicle service: MSM Trenčín: Welding, assembly and finalization of vehicles cabine, mainly the TATRA trucks.

Complete service for military vehicles includes the diagnostics (Tanks, Armoured vehicles, Self-propelled gun systems, ...)

Electronic Industry: MSM Banská Bystrica: Design, manufacturing and servicing of the radio navigation systems (NDB) for air traffic control (civil and military) as well as repairing and modernization of various kinds of Armed Forces equipment, especially in the segment of air defence equipment. Another important product of the portfolio is own development and production of Ground Power Unit (GPU) for the aircraft starting.

3

SCOPE OF FIELD

Bratislava

BANSKÁ bBYSTRICA

Bratislava

TRENČÍN

Ammo Services: MSM Nováky: Aimed at the ammunition area production covered whole ammo life cycle including the life cycle prolongation and the testing.

Technological possibilities with munitions1. Delaboration and disposal2. Repair and revision (extension of life cycle)3. Live, training and drill ammunition manufacturing

Bratislava

NOVÁKY

Bratislava

DUBNICA NNADNVÁHOM

SNINA


MSM Martin, s.r.o. , Thurzova 16, 036 01 Martin, Slovak Republic, www.msm.sk

4

7.62 x 39 blank Cartridge 7.62 x 39 BLANK has wide aplication for training purposes and for acoustical effects.

Technical data:

Caliber 7.62 x 39 mm

Cartridge length 48.2 mm

Cartridge weight max. 10.4 g

Cartridge case Brass CuZn30

Primer type Berdan

Propellant type Single base powder

Packages Retail paper box = 130 pcs

Technical data:

Cartridge 7.62 x 39 SA-58, AK-47, etc.

Cartridge 7.62 x 39 AP-T SA-58, AK-47, etc.

Cartridge 7.62 x 39 AP SA-58, AK-47, etc.

Cartridge 7.62 x 39 Practice SA-58, AK-47, etc.

Cartridge 7.62 x 54R Machine gun RPK, PKT, AKM UK-59

Live ammunition 7.62-43Sharp charge of with normal bulet. The charge consists of cartridge cases, primers, powder charge and bullet. The weight is 16.5 grams ammunition, bullet weight 8.05 g, maximum range of 2,800 meters.

Special ammunition 7.62-43 Sv Luminous, the illuminating missile contains Il. composition. The charge is indicated by a green tip on bullets.

7.62-43 PZPenetrating incendiary charge. It is marked with a black tip and a red stripe on bulet.

7.62-43 ZIncendiary charge. It is marked with a red tip on bulet.

Training Ammunition 7.62-43 CvUsed for training and imitation shooting. It consists of cartridge cases, primers and smokles powder. The Charge does not have missiles.(bulet).

7.62-43 Red Reduced charge for shooting at shorter distances. The maximum range 1100 meters. Charge has pistol bulet and quantity smokles powder is reduced. It is marked with a white tip.

7.62-43 RedSvReduced and luminous. It is marked with a green tip and a white stripe.

7.62-43 ŠkSchool charge for training. Rehearses the charge, discharge activity with container, slide and trigger. It is only an imitation sharp ammunition. Does not contain any smokeless powder or incendiary compound. It is marked with longitudinal overpresses on the body of the cartridge.

AMMO PRODUCTION – 7,62 CALIBER

MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk 5

AMMO PRODUCTION – 9 mm LUGER

The 9 x 19 mm LUGER has become the most popular caliber for law enforcement agencies and modern sports shooting, because of wide range of self-loading compact pistols and sub-machine guns with large magazine capacity of such ammunition.

Important factor, that contributing to the increasing popularity of such caliber, is low price compared to other calibers and availability.

The 9 mm Luger cartridge combines a flat projectile trajectory with moderate recoil. Together with sufficient wounding effect it makes an ideal cartridge for sports shooting or self-defense.

9 mm Luger – caseThe caliber 9 x 19 mm CuZn30 case is intended for inserting the powder charge, primer and bullet.

9 mm Luger – bulletThe full metal jacket bullets with lead core are produced in weight 7,5 g / 8,0 g / 9,0 g. The jacket is made from CuZn30 and the bullet core is made from Pb 99,5.

9 mm Luger – bullet

Weight (g) 7.5 8.0 9.0

Height (mm) 15.0-0.4 15.4-0.4 16.6-0.4

Diameter (mm) 9.02-0.02 9.02-0.02 9.02-0.02

Material Lead core Pb 99,5 / Bullet jacket CuZn30

9 mm Luger Technical data:

Bullet 7,5 g / 115 grs 8,0 g / 124 grs 9,0 g / 139 grs

Bullet type FMJ RN FMJ RN FMJ RN

Length (mm) 29.69 29.69 29.69

Velocity (m.s-1) - v0 370 360 320

Kinetic energy (J) - E0 513 518 461

Velocity (m.s-1) - v5 365 355 312

Kinetic energy (J) - E5 500 504 438

Test barrel length (mm) 285 285 285

Cartridges per box (pcs) 50 50 50

Boxes per carton (pcs) 20 20 20

Carton weight (kg) 12.7 13.2 14.2

9.0 g

8.0 g7.5 g

Full metal jacket bullet with lead core

Brass case with powder charge and primer

MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk6

AMMO PRODUCTION – HAND GRENADES, PYROTECHNIC COMPOSITIONS

URG-86 URG-86 is universal hand-grenade, designated for antipersonell pruposes. Grenade is consists of basic parts: Plastic body of Grenade, combined fuze (which enables the explosion following the impact or after time period of 3.2 – 4.6 seconds after the activation of the fuze), PL-U-EP 14 filling and shards. The function of URG 86 is secured even in case of adverse climatic conditions in the range between -50°C to +50°C.

Technical data:

Weight 440 g

Lenght 117 mm

Diameter 60 mm

Filling PL-U-EP 14

Filling weight 43 g

Production of Training Grenades URG-86Reduced Universal Hand Grenade (URG-86-Rd) is destined for the grenade usage training at the army. By its design the reduced grenade responds to a live grenade specified for the military application. In term of the output the effect of the reduced grenade is considerably lowered. Only the booster (primer) output is used at the grenade explosion

Universal Hand Grenade Training (URG-86-Šk) is intended to theoretical military units education. It is the maquette. „Šk“ means „Školný“ (School). The body and the fuse of the maquette are black instead of green, and there is on the fuse the red cross marking.

1. PrimersPrimers are used to ignite the spotting and powder charges. They are initiated by firing pin percussions onto bottom of the primer. They consist of brass anvil into which cup with percussion priming composition is moulded. Crimped priming composition in the cup is covered with tinfoiled disc.

2. Igniters Igniters serve for igniting the detonators or delay elements in artillery ammunition fuzes. They are initiated by sharp needle injecting. They consist of copper cup, into which the stabbing priming composition of cooper cover is molded.

3. Detonators Detonators serve for initiating the explosives. They consist of aluminium cup and cover, primary and base charge. Primary charge consists of two primary explosives and secondary charge consists of high explosive. Ignition hole on the cover is closed by silk cloth disc


30 mm AmmunitionProduction program of 30 mm ammunition features following types of rounds:

30 mm AP-T (Armour Piercing round with Tracer)

is designed for firing from 2A42, 2A38 and 2A72 guns for engaging light-armored ground and air targets.

Legend:1. Shell body, 2. Steel cartridge case, 3. Ballistic cap

4. Tracer, 5. Propelling charge, 6. Priming screw 7. Decopperizer, 8. Driving band

30 mm HE-I (High-Explosive Incendiary round)

is designed for firing from 2A42, 2A38 and 2A72 guns. It is used for defeating ground and air targets by incendiary effect induced by the shell splinters after a target has been engaged and its explosive charge activated. The impact fuze has also a self-destruction function, which is activated in case of missing the target.

Legend:1. Shell body, 2. Steel cartridge case, 3. Impact fuze

4. Incendiary charge, 5. Propelling charge, 6. Priming screw, 7. Driving band

Technical data:

AP-T HE-I HE-T HE-T PRACTICE

Caliber (mm) 30 30 30 30

Weight of round (kg) 0.858 0.835 0.835 0.835

Lenght of round (mm) 288.5–291.8 288.5–291.8 288.5–291.8 288.5–291.8

Muzzle velocity (m.s-1) 970 960 960 960

Min. burning time of tracer (s) 3.5 – 9.0 4.5

Self-destruction time (s) – 9.0–14.0 9.0–14.0 5.5–9.5

Type of priming screw percussion

Fuze –Impact, self-destructive

Impact, self-destructive

2x self-destructive only

AMMO PRODUCTION – 30 MM CALIBER

30 mm HE-T (High-Explosive round with Tracer)

is designed for firing from 2A42, 2A38 and 2A72 guns. It is used for defeating ground and air targets by bursting effect of the projectile at the range up to 3,000 meters. The impact fuze has also a self-destruction function.

Legend:1. Shell body, 2. Steel cartridge case, 3. Impact fuze, 4. Bursting charge

5. Propelling charge, 6. Priming screw, 7. Tracer, 8. Driving band

30 mm HE-T PRACTICE (High-Explosive Practice round with Tracer)

is designed for practice firing from 2A42, 2A38 and 2A72 guns against ground and air targets. The projectile is equipped with two fuzes. Both fuzes have self-destruction function only. The self-destruction occurs within an interval of 5,5–9,5 seconds after fire. Splinters of the projectile do not exceed range of 5,000 meters.

Legend:1. Shell body, 2. Steel cartridge case, 3. Front self-destructive fuze

4. Bursting charge, 5. Bottom self-destructive fuze , 6. Propelling charge7. Priming screw , 8. Tracer, 9. Driving band

Packing:

Number of rounds in metal sheet case pcs 18

Dimensions of metal sheet case mm 325 x 230 x 127

Weight of full metal sheet case kg 17

Number of metal sheet cases in wooden box pcs 3

Dimensions of wooden box mm 875 x 398 x 206

Weight of empty wooden box kg 8.7

Weight of full wooden box kg 60

Number of wooden boxes on pallet pcs 15

Dimension of pallet mm 1.200 x 800 x 1.100

Weight of full pallet kg 930

Packing codeun

4C1/Y65/year of production SK/1003M/TSU104000095/10R

Hazard Class ADR 1.2 F



8

122 mm Rocket „GRAD“ for RM-70 / BM-21

AMMO PRODUCTION – 122 MM ROCKET „GRAD“ FOR RM-70 / BM-21

Technological line for inspection of artillery rockets 122 mm JROF RM70 is designed for repair, modernization and inspection in order to extend the life.

At the inspection procedures is performed:

– modernization, which is caused by the requirement to increase the safety of rockets and resistance against unintentional initiation of induction or action of static electric charges

– replacement of damaged parts, which affect its function, internal and external ballistics

– check of alignment of centering ring and the warhead, high of locating pin, position of locating pins to the longitudinal axis, position of the contact cap, geometry of the open stabilizer, circuit and resistance of rockets, air tightness of the tin for fuses

– complete repair of packages

Technical data:

Caliber 122 mm

Lenght of missile with fuze 2867.31–2882.60 mm

Weight of missile with fuze 66.6–66.75 kg

Max. range 20.4 km

Min. range 3 km

Type of the warhead High Explosive (HE) Warhead

Fuse MRV-U Impact fuse (with immediate, short and long delay)

Rocket motor Double-based solid propellant

Weight of the rocket motor 48.2 kg

Weight of the propellant 20.5 kg

Color silver

Limits of temperature

Storage -40°C / +60°C

Fire -32°C / +50°C

Packing One rocket and one fuze in each box


Engine Modernization Basic version range: Max: 20.4 kmMin: 3 km

Possibility for engine modernization:

Max. range36 km (over sea)

40 km (in 600 m altitude)

Min. range16 km (over sea)

21 km (in 600 m altitude)

Warhead Modernization Basic warhead: High Explosive (HE)

Possibilities for warhead modernization:

HEAP

Number of fragments (shrapnels): 1050 pcs

Armour penetration:Radius = 15 m Thickness 10 mmRadius = 32 m Thickness 6 mm

HEF

Number of fragments (balls): 9100 pcs

Fragments density (pcs/m2) at lethal radius:R = 7 m 118.1R = 15 m 34.6R = 20 m 21.5R = 40 m 4.6

AMMO PRODUCTION – 122 MM ROCKET „GRAD“ FOR RM-70 / BM-21 – MODERNIZATION

Fuse Modernization Basic version fuse: Impact fuse (with immediate, short and long delay)

Possibility for fuse modernization:

Product name: Forad-1

Operation regime: Proximity & Impact as the option

Initiation process: Mechanical (Impact, Delayed) / Electrical)

Height of explosion: Regular settings in 2 levels:

h=1÷30 m

h=1÷15 m

Protection:

Fuzes are protected against specific electric defense equipment

Fuzes will not be activated by clouds, fog, storm or sandstorm.

Operational temperatures: -40°C ÷ +50°C

Lifespan:Min. 10 years – if stored in original package and all storage conditions are met.

Warranty for technology and equipment: 2 years

Warranty for rockets: Lifespan is prolonged by 5 years (from 10 years to 15 years)In the case of modernization the lifespan is prolonged by 10 years

Revision costs are aprox. 1/3 of total costs of provision of new rockets

122 mm HEF 122 mm HEAP


Possibilities for the Modernization of 122 mm Rockets for RM-70

AMMO PRODUCTION – 122 MM ROCKET „GRAD – MODULAR“

MODULARImproved system of Launcher designed for multiple use of 122 mm JROF.

MODULAR container loaded with 122 mm missiles can be transported on carriage body of vehicle, or snuged on RM 70/85 MODULAR rocket launcher and is suited for air and naval transport.

It is possible to launch 122 mm JROF and 122 JROF-M missiles directly from container. Contains 28 pcs of missiles.

– Loads and unloads using built-in crane– Automatic identification of type of rocket– Operation from inside the crew cabin– Autonomous mission capabilities– Air – transportability


AMMO PRODUCTION – 122 MM FOR RM-70 / BM21 – MODERNIZATION

Reference and experience related to 122 JROF delaboration, revision, modernization and the technology and equipment sales including the implementation

Germany

Syria

Vietnam

Turkey

Egypt

Ministry of defence of Slovak republic

MSM GROUP offers delivery of the complete know-how included the technology for production and revision, not merely for 122 mm GRAD but for thorough ammo portfolio, too. Our teams of specialists develop the technology based to the customer requirements. We offer the technology in a stationary or in a mobile mode. We offer transfer of the production line (revision, disassembly or ecological disposal) to the customer place including the training for line operators.

MSM GROUP has been awarded in 2013 the Prestigious Prize at International Exhibition of Defence and Security Technologies IDET for Mobile technological line for destruction of ammunition.

Mobile line model for the ammunition disassembly Segment of the stationary line for 122 JROF GRAD production



125 mm Ammunition is designed for firing from 2A46 cannon of T-72 or other tanks, which have the D-81 type of 125 mm cannons. The production program of 125 mm ammunition features following types of rounds:– HE– HE-T– HE-T PRACTICE– HEAT-T – APFSDS-T– ECv

125 mm HE(High-Explosive round)

is divided round with stabilizer. Shell is charged with screw filled TNT and is initiated by impact fuze, which can be set on superquick or delayed action. The cartridge is semi-combustible and consists of sealing steel cartridge case, combustible case and powder charge. It is initiated by priming screw with mechanical or electrical ignition. The round is intended for muting living forces, destroying shelters, barricades, buildings and other heavy targets.

125 mm HE-T(High-Explosive with Tracer and self destruction)

125 mm HE-T is high explosive round with tracer. Shell with stabilizer is charged with screw filled TNT or TNT/RDX charge, it is equipped by head point detonated fuze, bottom self-destructive fuze and by 2 tracers. The self-destruction time ranges between 3,8 to 5 seconds at the condition that after detonation of the self-destructive fuze splinters of the shell cannot overfly 5000 m. The round is designed for firing on target from tank type T-72 and other tanks equipped with 125mm barrel type D-81.

Legend:1. Shell body, 2. Stabilizer, 3. Bottom self destructive fuze,

4. Explosive charge, 5. Front fuze, 6. Tracer, 7. Propelling charge, 8. Combustible case, 9. Sealing case

125 mm HE-T PRACTICE (Practice High-Explosive round with Tracer)

is divided round with stabilizer and tracer. Shell is charged with screw filled TNT and is equipped with front self destructive fuze (AZ-90), bottom self-destructive fuze (DZ 75 AU) and two tracers. The self-destruction occurs within an interval of 3.8-5 seconds, while splinters won‘t exceed the range of 5,000 meters. The cartridge is semi-combustible and consists of sealing steel cartridge case, combustible case and powder charge. It is initiated by priming screw with mechanical or electrical ignition.The round is intended for practice firing from tanks equipped with 125 mm cannon.

Legend:1. Shell body, 2. Stabilizer, 3. Bottom self destructive fuze,

4. Explosive charge, 5. Front fuze, 6. Tracer, 7. Propelling charge, 8. Combustible case, 9. Sealing case

Technical data:

Type of round HE, HE-T, HE-T PRACTICE

Caliber (mm) 125

Weight of entire round (kg) 23

Cartridge length (mm) 408

Length of the sealing cartridge case (mm) 140

Cartridge weight (kg) 9.5

Weight of the powder charge (kg) 6

Effective firing range (m) 2000

Muzzle velocity (m.s-1) V0 = 850

Packaging

Number of rounds per wooden box 1

Dimensions of wooden box (mm) 832 x 535 x 270

Weight of the box with round (kg) cca 62

Dimension of pallet (mm) 1075 x 832 x 1143

Number of boxes on the pallet 8

Weight of loaded pallet (kg) 523



125 mm HEAT-T(High Explosive Anti – Tank with Tracer)

125 mm HEAT-T has been designed for direct firing against tanks, self-propelling weapons, mortars and heavy armored targets. It may be also used against concrete bunkers. Round is aerodynamically stabilised with six fin, which are folded and opened during the flight. Semi-combustible cartridge Z 40 or Z 52 is initiated by the priming screw with an optional mechanical or electronic function. Round is designed for firing from T-72 tank or other barrels type D-81.

Legend:1. Fuze 2. Body

3. Hollow charge insertion 4.Explosive charge5. Fins with tracer

Technical data:

Type of round HEAT-T

Caliber (mm) 125

Length (mm) 678

Weight of entire round (kg) 19

Tracer's burning time (s) min 3

Semi-combusted cartridge




Weight of the powder charge (kg) 5

Effective firing range (m) 2000

Muzzle velocity (m.s-1) V0 = 900

Packaging

Number of rounds per wooden box 1

Dimensions of wooden box (mm) 832 x 430 x 270

Weight of the box with round (kg) cca 55

125 mm (APFSDS-T) TAPNA Armor Piercing Fin Stabilized Discarding Sabots Tracer round) is divided sub-caliber armor piercing round intended for destroying armored targets, such as tanks or other armored vehicles. Armour piercing is max. 550 mm of RHA at the distance of 2,000 m. The armor piercing penetrator is made from tungsten alloy, equipped with fin stabilizer with tracer. The projectile is embedded in combustible case with powder charge. The cartridge is semi-combustible and consists of sealing steel cartridge case, combustible case and powder charge. It is initiated by priming screw with mechanical or electrical ignition.

Legend:1. Tip

2. Penetrator3. Sabot

4. Driving band5. Sealing ring

6. Powder charge7. Combustible case

8. Fin stabilizer9. Tracer

10. Flame damper11. Base powder

12. Combustible case13. Seali-ng case

14. Ignater15. Priming screw

125 mm semicombustible

cartridge

125 mm APFSDS-T projectile in combusti-

ble case

125 mm APFSDS-T projectile

Technical data:

Weight of the complete round 20 kg

Weight of the projectile including the increment propelling charge

10,3 kg

Weight of the projectile 7,15 kg

Muzzle velocity 1690 m/s

Temperature range -40°C to +50°C

Accuracy 0,5 m x 0,5 m at 2000 m

Penetration 550 m of RHA at 2000 m

Packaging

1 piece of the round in the hermetic sheet metal canister, 20 pieces of the rounds in one pallet. This packing is applying for long term storing (10 years)



125 mm ECv 125 mm IMITATION TRAINING ROUND 125 mm CV is a practice/imitation ammunition designed for tank cannon D-81, which perfectly imitates loading and firing of combat ammunition. Energy created during shooting is sufficient for automatic function of the weapon in extreme temperatures. In regards of the minimal danger zone (100 m) costs for training are only fraction of costs necessary for firing with combat warhead.

Technical data:

Type of round Imitation, Training

Caliber (mm) 125

Weight of dummy round (kg) 10.9

Middle gas pressure at normal temperature (Mpa) 98.7

Endangered zobe by flying cartridge and round residue to 100 m from muzzle

Cartridge Ž40, Ž52

Priming screw GUV-7

Semi-combustible cartridge




Legend:1. 125 Imitation projectile2. Upper casing 3. Inner casing4. Decopper 5. Upper igniter 6. Combustible mantel7. Powder charge 8. Bottom igniter 9. Priming screw

AZ 90U FuzeDZ 75 AU FuzeBasic technical characteristics of 125 mm rounds

Technical data:

HE HE-T PRACTICE APFSDS-T

Caliber (mm) 125 125 125

Weight of projectile /with fuze (kg) 23 23 7.08

Velocity (m.s-1) 850 850 1.68

Max. gas pressure (MPa) 387,4 387.4 500

Explosive charge /TNT (kg) 3,15 3.05 -

Fuze Impact 2 self-destructive fuzes AZ 90U, DZ 75 AU -

Packing 125 mm HE, HE-T practice, HE-T

Packing:

Number of projectiles in wooden box pcs 1

Dimensions of wooden box mm 832 x 536 x 270

Weight of the box with round kg 62.5

Number of wooden boxes on pallet pcs 8

Dimension of pallet mm 1,075 x 832 x 1,143


Packing codeun

4C1/Y65/S/Year of production SK/1003M/ID number of certif. authority

Hazard Class ADR 1.2 E

The APFSDS-T rounds are packed in hermetic metal cases, 1 complete round in wooden box on metal pallet. One pallet contains 20 pieces of complete rounds.

Front fuze AZ 9OU

Bottom fuze DZ 75 AU



152 mm AmmunitionDue to the experience with 155mm ammunition, where the discharge gas generator (Base Bleed) was used for range extension, also the 152mm ammunition production program has been extended by 152mm projectiles with Base Bleed. The classic version of HE projectile with hollow base (HE ER-HB) is also available.

152 mm HE ER-HB(High-Explosive Extended Range projectile with Hollow Base)

Technical data:

Projectile weight with fuze (kg) 43.56

Projectile length without fuze (mm) 778

Projectile length with fuze (mm) 838

Muzzle velocity (m.s-1) 695

Max. gas pressure (MPa) 230

Temperature range (°C) (-40)–(+50)

152 mm HE ER-BB(High-Explosive Extended Range projectile with Base Bleed)

Long range projectile HE ER BB is primarily designed for howitzer weapon system 152 mm DANA mod. 77 and modernized DANA-M1 CZ without modification of automatic loading system. The round is divided and consists of 152 mm projectile HE ER-BB and P740 cartridge. It is intended for destroying of enemy infantry units, firing posts, trenches, roadblocks, light armored vehicles, buildings, observation points etc. in range up to 25,500 meters.

Optional Fuzes for 152 mm Projectile with BBSuggested options :

1. standard KZ-88 fuze2. upgraded KZ-88 fuze with increased safety

and reliability function 3. replacement of KZ-88 fuze with different

fuze, which meets NATO standards.

Technical data:

Projectile weight with fuze (kg) 43.56

Projectile length without fuze (mm) 778

Projectile length with fuze (mm) 838



Bonding between shell body and BB Threaded, demountable

Temperature range (°C) (-40) – (+50)

Modified Cartridge P740Modified cartridge P740 consists of original steel case filled with triple base smokeless powder M30 (nitrocellulose, nitroglycerine, nitroguanidine), which enables higher performance with reduced barrel abrasion. The exact combination of tubular and granular powder enable to increase muzzle velocity with relatively small increase of maximum pressure in cartridge chamber. The charge is initiated by standard priming screw.

Legend:1. Cartridge case 2. Tubular charge3,4,5. Covers6. Flange7. Priming screw8. Granular charge

Fuze KZ 88-M



155 mm Ammunition The production programme of 155mm ammunition features following projectile types:– HE (HE ER-HB, HE ER-BB, HE ER FB- BT, HE ER FB-BB)– short range practice (HE PRACTICE)– M107 HE

155 mm HE ER-HBHigh Explosive Extended Range projectile with Hollow Base) is filled with TNT or TNT/RDX (Composition B) explosive in ratio approx. 50/50. The projectile has hollow base screwed on the projectile (shell body) bottom.

Legend:1. Shell body, 2. Explosive charge

3. Fuze, 4. Driving band5. Hollow Base

155 mm HE ER FB-BB High Explosive Extended Range Full Bore projectile with Base Bleed) is a long range projectile of modern design where the front centering collar is replaced by four projections, called „nubs“. The projectile has the Base Bleed screwed on its bottom, which ensures range up to 39,000 meters when fired from 45 caliber gun and up to 42,000 meters when fired from 52 caliber gun.


3. Fuze, 4. Driving band5. BB body, 6. BB igniter

7. BB grain

Technical data:

HE ER-HB HE ER-BB HE ER FB-BT HE ER FB-BB HE PRACTICE

Caliber (mm) 155 155 155 155 155

Projectile weight (kg) 44 47 44 47 46,1

Projectile length without fuze (mm) 831 841 831 841 707

Explosive cherge (kg) 9,9 9,9 8,1 9,9 1,2

TNT or TNT/RDX

TNT or TNT/RDX

TNT or TNT/RDX

TNT or TNT/RDX

TNT

FuzeKZ984

Point detonating

Packing:

Number of projectiles on pallet pcs 8

Dimensions of pallet mm 360 x 765 x 964

Weight of pallet unit kg 395

Packing codeun

4C1/Y65/S/year of productionSK/1003M/ID number of certif. Authority

Hazard class ADR 1.1 D

155 mm HE ER-BBHigh Explosive Extended Range projectile with Base Bleed) has the same shell body with explosive charge and the same fuze as HE ER-HB projectile. But unlike the HE ER-HB projectile, the HE ER-BB projectile uses the discharge gas generator (Base Bleed), which ensures extended range up to 37,000 meters, when fired from 45 caliber gun and up to 40,000 meters when fired from 52 caliber gun.


3. Fuze, 4. Driving band, 5. BB body6. BB igniter, 7. BB grain



KZ 984 Fuze is intended for the projectile 155 mm HE ER-HB (High Explosive Extended Range projectile with Hollow Base). The fuze is pyrotechnical, with detonator safety and two independent safety features for arming, to meet NATO standards. For desired effect on target it can be set on superquick (fragmentation effect) or delayed action (bursting effect).

Legend:1. Firing pin, 2. Spring, 3. Sliding case

4. Balls, 5. Striker, 6. Primer, 7. Primer casing8. Insertion, 9. Pin, 10. Closing nut, 11. Fuze body

12. Safety mechanism, 13. Booster charge, 14. Membrane15. Sealing ring, 16. Ball, 17. Striker upper body

18. Delay mechanism, 19. Cock, 20. Rings, 21. Fastening case

155 mm BI-MODULAR CHARGE SYSTEMThe bi-modular charge system is used for all previously mentioned 155 mm projectiles. It consists of following two types of charges:

– BC-E charges used for short range (zone 1-2)

– TC-F charges used for long range (zone 3-6)

Bi-modular system covers firing range of 155mm projectiles from 5 up to 42 kilometers when fired from 52 cal. gun (with HE ER FB-BB projectile).

155 mm Self-propelled Gun Howitzer „Zuzana“ produced in Slovakia


AMMO PRODUCTION – MORTAR BOMBS

Mortar bombs are designed for defeating light armoured targets. Machine gun nests, field fortifications, infantry unit in trenches and units hidden after natural obstacles especially in mountainous and woody terrains.

MSM GROUP can offer also the mortar ANTOS or ANTOS-LR.

The production program of mortar bombs includes the following types of rounds:

60 mm Mortar Bombs for Mortar ANTOS

Technical data:

Mortar Bomb HEI Mortar Bomb HEF Mortar Bomb JUMP Mortar Bomb SMK Mortar Bomb ILL-IR

High Explosive with Incendiary Effect

High Explosive with Frangmentation Effect

Dummy forthe Training

Smoke effect with the same balictics as the life

bomb

IlluminatingInfrared

Weight of mortar bomb 1.420 g 1.420 g 1 290 ± 30 g 1.420 g 1.200 g

Weight of explosive 270 g 270 g – – –

Weight of smoke-producing corpuscle – – – 120 g –

Weight of primary propelling charge 5.0 g 5.0 g – 5.0 g 5.0 g

Weight of augmenting charge (pair) 2 x 3.5 g 2 x 3.5 g – 2 x 3.5 g 2 x 3.5 g

Weight of amplifier (BP) 0,35 g 0,35 g – 0,35 g 0,35 g

Length of the bomb with fuse 294 ± 2 mm 294 ± 2 mm 284 mm 294 ± 2 mm 273 mm

Range (at 21°C) – elevation 85° 85° 80 m 85° 80 m – 85° 80 m 85°

Range (at 21°C) – elevation 45° 45° 1200 m 45° 1200 m – 45° 1200 m 45°

Fuse type AR-MDH/DM 111 AR-MDH/DM 111 – MZ-35 –

Primer screw Own Design

Weight of the wooden box with 10 bombs 20 kg 20 kg 20 kg 20 kg 20 kg

Technical data:

Calibre 60.7 mm

Weapon length 905 mm

Barrel length 650 mm

Barrel length with breech ring 790 mm

Range of aimed elevation 45°–85°

Maximum range 1230 m

Minimum range 80 m

Mortar weight 5.3 kg

Mortar weight with spare parts and accessories in storage package

16.5 kg


AMMO PRODUCTION – MORTAR BOMBS

81 and 98 mm HE Mortar Bomb The 81 mm and 98 mm mortar bombs are fired from towed mortars.

120 mm HE Mortar bomb The 120 mm mortar bombs can be fired either from towed or self-propelled mortars.

The mortar bombs can are fired fitted with PD fuzes MZ-95M and MZ-81M respectively.

The fuze type MZ-95M is nose point detonating fuze, designed fo high-explosive mortar ammunition. The fuze can be set on superquick or delayed action according to required effect on target (fragmentation/bursting). The fuze is pyrotechnical with detonator safety.

Technical data:

Technical characteristic 81 mm HE mortar bomb 98 mm HE mortar bomb

Caliber (mm) 81 98

Weight (kg) 5 9.2

Explosive charge (kg) 0.72 1.46

Maximum firing range (m) 6800 8000

Minimum firing range (m) 240 300

Max. gas pressure (MPa) 120 130

Muzzle velocity (m.s-1) 375 387

Fuze MZ-81 MZ-95 M MZ-81 MZ-95 M

Packing:

Caliber 81 mm 98 mm

Number of bombs in packing pcs 2 1

Dimensions of packing mm 888 x 360 x 230 700 x 118 x 116

Weight of full packing kg 46 36

Number of packings on pallet pcs 15 8

Dimensions of pallet mm 1.056 x 890 x 1.080 780 x 770 x 550

Weight of full pallet kg 760 121,6

Packing Codeun

4C1/Y65/S/year of production SK/1003/ID number of certif.

authority

4H2W/Y12/S/year of production SK/1003/number of certif.

authority

Hazard Class ADR 1.2 E 1.2 E

81 mm HE mortar bomb 98 mm HE mortar bomb

Technical data:

Technical characteristic120 mm HE

mortar bomb

Caliber (mm) 120

Weight (kg) 16

Explosive charge (kg) 2,66

Maximum firing range (m) 8000

Minimum firing range (m) 250



Fuze MZ-81 MZ-95 M

Packing:

Caliber 120 mm

Number of bombs in packing pcs 2

Dimensions of packing mm 520 x 265 x 130

Weight of full packing kg 28

Number of packings on pallet pcs 6

Dimensions of pallet mm 640 x 435 x 595


Packing Codeun

4H2W/Y12/S/year of production SK/1003/number of certif. authority

Hazard Class ADR 1.2 E

MZ-81M

MZ-95M

120 mm HE mortar bomb

120 mm HE substitute mortar

bomb



20

AMMO PRODUCTION – TRAINING AMMUNITION AND DUMMIES

Training Ammo, Dummies and Cuts We can offer in this area:

1. Training cartridges and projectiles for manually loaded guns (calibres 57-152 mm)2. Training rounds for guns with automatic loading mechanism (122 mm ECv for HD-30 and ShH

2S1, 125 mm Ecv for T72,152 mm ECv for ShKH 77, 73, PG15V, Cv for BVP-1)3. Accesories for training cartridges (muzzle brake 122 HD-30, ShH 2S1 and 152 ShKH)4. Fictional water cartridges for recoil brake mechanisms of artillery guns (100, 122, 125,152 mm)5. Anti-Tank trainning mines Cv Pt-Mi Ba III6. Universal hand grenade

Advantages of training ammunition:Real sound and optical effect and real automatic fuctioning of the gunSafety of area 100m from the muzzle of the barrelLower costs of training in comparison with use of live ammunition

MSM GROUP supplies Taylormade‘s training ammo based on customer requirements

Ammo DummiesMSM GROUP is the main supplier for ammo dunnis for international EOD centre located in Slovakia.

ReferenceMOD of Slovakia, MOD of Czech Republic, MOD of Hungary, MOD of Poland, MOD of Austria, MOD of Vietnam, MOD of Greece, MOD of Nigeria, MOD of Slovenia, SB Equador, Diehl Germany, MKEK Turkey, ELBIT Land System Izrael.


AMMO PRODUCTION – FLYING TARGET IMITATOR 122 MM

Flying Target Imitator 122 mm (LIC)Flying target imitator 122 mm FTI is intended to imitate air targets during the military live firing from anti-aircraft launchers, which have infrared guiding system.

122 mm rocket FTI consists of drive unit with adjusted wing part. The drive unit consists of a back chamber of 122 mm rocket JROF GRAD.

The rocket engine is lighted up by electric detonator. The imitator of air targets is a warhead, which is screwed on the back chamber of the rocket. The warhead of FTI consists of parts, which ensure required intensity of radiation on the flying trajectory (they imitate airplanes and helicopters) – imitator of interference / jam, of mechanical switch and of electric fuse TOM-1. 122 mm FTI rocket is supplied in wooden boxes.

Technical data:

Weight of the rocket 42.5 kg

Weight of the FTI warhead 15.0 kg

Electronic fuse TOM-1 with adjusting

Distance of flight 4450 ÷ 6500 m

Height of flight 600 ÷ 3700 m

Flying speed in the area of target imitation 100 ÷ 320 m.s-1

Imitation period of a light trace 30+5 s

Imitation period of light interference / jam 4+2 s

Firing Equipment for LICFiring equipment OZ – LIC ensures the firing the 122 mm Flying target imitator – FTI during the training of anti-aircraft forces.

It enables circle-firing on the distance from 5 200 to 6 500 m with elevation from 25 °C to 70 °C and it is operated by commander – loader and gun pointer.

The firing equipment is placed on the chassis unit which enables to tow the equipment by the terrain vehicle UAZ-469, or medium lorry P-V3S/M.

Technical data:

Max. range 6500 m

Min. range 5200 m

Height of flight 600 ÷ 3700 m

Elevation range 25° ÷ 70°

Angle range 360 °

Total weight 250 kg

Length of the tube 2996 mm

Dimensions of the equipment 1970 x 3480 x 1680

Wheel gauge 1660 mm

Legend:1. Body (Warhead)

2. Switch3. Top

4. Main substance with initiator5. Jammer

6. Pad7. Transport safety lock8. Electric igniter 121B

9. Component polyester cement10. Batt ø 18x2

11. Insulation pad12. Electronic fuse TOM-1 + Batery 9V

13. Bolt M3x1214. Expanding pin

15. Spring ø 8,3/08-1916. O-Ring 87x1,5



22

AMMO SERVICE – TECHNICAL LIFE EXTENSION AND MODERNISATION

Repair/Revision – Replacing of damage parts– Gun powder homogenization or its replacing– Surface areas renovation and renewal– Main technical parameters checking– Cartridge case renovation including recalibration– Inspection of ordnance from 30 up to 155 mm– nspection of 122 JROF RM–70 “GRAD”– Inspection of mortar bombs from 60 mm. 82 mm EOM up to

160 mm EOM – Total revision (including motors) of ATGM type „Maljutka“,

„Konkurz“, „Fagot“– RG–4 (hand grenade) repair– Other activities upon the client‘s requirements– The company is ready to perform the renovation of discharged

shells – i.e. to perform the resizing an surface treatment.

The aim of repair operations is to PROLONG THE LIFE TIME of ammunition. There is a greater economic return than the disposal of ammunition and the subsequent production of new ammunition.

Modernisation – The exchange (replacement) lighter – more reliable, safer,

smarter (eg. which is initiated when approaching)– More resistant material (anti-corrosion paint, paint the new

generation) – New surface protection round and cartridge– The range extension– The maximizing of the effect on the target - in the impact zone– Various missiles variants HE, Illumination, Thermobaric,

Training...– Replacement of outdated components (renewed stabilizer)– More lightweight packaging and more durable transport

packaging– Possible use of mobile technology line (Made by MSM GROUP)– Complete Logistics

Inspection of customer‘s ammo material:– Inspection of damaged parts and initiators– Inspection and testing of technical parameters

1. Physical – chemical testing of all ammunition/ pyrotechnical elements (For example: Fuse, explosive, igniter, propellant, charge powder)

2. Testing of electrical circuits3. Visual checking, testing of mechanical parts, checking

of protecting paints,... -Inspection of the packaging

Report to customer with the proposal for:1. Repair/ Revision2. Modernisation3. Ecological Liquidation

The Scope:1. Revision, prolongation of life cycle or modernization of

calibres from 30 to 155 mm2. Revision, prolongation of life cycle or modernization of

rockets 122 JROF „Grad“3. Revision of Mortar Bombs of calibres 60 mm, 81mm, 82 mm,

98 mm, 120 mm, 160 mm4. Anti-tank and anti-aerial guided rockets: Malyutka, Konkurz,

Fagot, IGLA

Inspection


AMMO SERVICE – ECOLOGICAL LIQUIDATION

Ecological Liquidation– The ordnance disposal is intended to an ammo either beyond technical warranty or not suitable for

major overhaul operation. – All risk and dangerous operations are performed automatically, by the equipment operating

behind the protective armour.– Liquidation is carried out by the equipment developed, designed and manufactured by MSM

GROUP. The technology is approved by the respective environmental authority.– All this gained material is given to the industrial usage. At the end of the total process there is the

waste water neutralization performed in neutralization station.

The equipment is intended for placing, fixing and manipulating with TPH during its disposal operation performed by power water eroding. The company owns special technology and the know-how to ensure the ecological disopsal. There is a lot of knowledge and experience with ammunition disposal and liquidation for Armed Forces of Slovak republic, for Ministry of Defence of Czech republic, Hungary, Bulgaria etc. This know-how and technology can be used for various types of rockets.

The company performs the disposal of fuses which have been in use. The company has evaluated and approved technology, process documentation and the equipment for every single type of ammo. At the disposal performance it takes care of environment and make the disposal in friendly environmental way.

Verification of Ecological Liquidation

MSM GROUP is disposed towards to realize the verification controls of disposal of ammunition performed by the Control Body of Ministry of Defence of Slovak Republik and also by the third parties. The company has been verified by the verification USA team after the disposal of 9M714K in the 2001.

Protocol about the disposal is issued after each disposal performance. The photo documentation from the process of the disposal of individual types of ammunition is made according to customer requirements.

MSM GROUP stores the samples of disposed parts and according to the customers requirements they are submit to the verification team.

Pyrowaste

TNT,powder charge,solid rocket propellant

Metal waste:Fe, Cu, Pb, ...

Liquidation

For further processing in the industry after reprocessing

Rockets

Ammo of caliber 20–155 mm

Air Bombs

Infantry Ammo 5.45–14.5 mm

Solid Propellant and Rocket Carriers

Fuses



24

AMMO SERVICE – DESIGN AND DEVELOPMENT

MSM GROUP team designs, develops and produces stationary and mobile equipments, for example special equipments and devices for repair, delaboration, liquidation, destroying, disposal, melting, floating off and renewal of ammunition. The company provides complete supplies of complete technological lines for repair, revision and disposal of artillery ammunition and rockets.

Within the technology lines delivery the company provides to the customers its special know-how.

The main equipments are:

– Automatically controlled equipment for unscrewing of primer screw and fuse and the ammunition disassembly to cartridge and missile at the same time

– Equipments for unscrewing / disassembly of rockets

– Equipments for explosive melting or floating off

– Equipments for explosive and gun powder treating

– Equipments for recalibration and surface treatment of cartridge case

MSM GROUP performs engineering and machinery production and related services, development and production of special single-purposed equipments and devices. It offers design and consultancy services in development and production area.

MSM GROUP offers the services in design by modern software and the production of single-purposed equipments and of molds for polyurethane parts.

The automatic line for Booster production


AMMO SERVICE – MOBILE TECHNOLOGY LINES

Features o mobile technology lines:

– Placing on the chassis without own drive (container )

– High mobility feature and easy manipulation

– Variety of the containers set up / configuration

– Protection from explosion

– Machinery, device and software equipment are the same as for the stationary technology lines

Main benefits of mobile line:

– Cheaper delaboration (air shipping of the line is much lower than transporting of ammunition)

– Modular system according to customer’s requirements.

– The whole process finishes by ecological disposal of ammunition

Composition in 5 sections (A, B, C, D, E) provides the entire operation process:

Section A: Mobile explosive-resistant storage houses for explosives

Section B: Storage houses for tools, preparations, devices, aids

Section C: Mobile disposal technology line

Section D: Mobile laboratory unit

Section E: Rest rooms, toilets

MSM GROUP has been awarded in 2013 by Prestigious Prize at International Exhibition of Defence and Security Technologies IDET for Mobile technological line for destruction of ammunition:

The company offers the delivery of revision and disposal equipments in stationary mode – placed right in a building, or in mobile mode – by establishment of mobile technology lines in special mobile containers.


ELECTRONICS INDUSTRY

Integrated navigation system for aviation NARASYS Radars upgrades– Extension of the technical life of 12 to 15 years

– Three-dimensional digital display of radar information and its distribution and connection to various types of automated systems of command (ASC) and air system management (ASM)

– Implementation of identification systems - IFF according to NATO standards STANAG-4193, (Mode 4,5)

– Compatibility with anti-aircraft missile system S-300PMU

– Substantial increase of operational reliability and accuracy of radar information

– Reduce the number of transport units and operators

– Expanded Program for Assistance

Upgrades 1RL139/ P-37 to 3-D radar – The entire modernization was carried out according to customer-specific requirements and

opportunities of the modernization kit of the radar manufacturer in the areas of our company. Part of upgrade has been the integration of EADS IFF systems MSR2000I meeting the requirements of NATO standards (STANAG 4193, MARK X MARK XII).

– In 2009, we made further modernization in cooperation with suppliers as EADS Deutschland and LEMZ Moscow with integrating of FF systems MSSR-2000 with operations in Mode 4, 5 and S.

Upgrades of 3D surveillance radar Main characteristics of the ST-68 MSK modernized radar:

– High probability of detection of small targets reflecting surface flying on small and ground heights

– Screen capture of targets with effective reflecting surface of 10 m2 within 360 km incorporating a new Trigger mode of Transmitter

– High probability of fast-and slow-flying targets detection, including helicopters in hanging position

– High resistance to unintentional and intentional interference of various types, the possibility of determining the pointer targets - jammer

– Protection against anti -radar missiles

– Automatic equation of primary echo signals with signals of responses of embedded identification device /IFF/ with creating of full Radar info, info transmission in ASTERIX standard formats

– Possibility of up to 120 targets pathways automatic tracking for one turning of the antenna

– High mobility

MSM GROUP employs the team of design engineers with excellent experience in the development in electrical engineering. Our production is mainly intended for customers from aviation.

Development, production and servis of the systems NDB (NAVYRA) and the position markers

MSM GROUP in the scope of the electronics industry also produces the Switchboards cabinets, RF cables, Kryostar – the appliance for local cryotherapy, Ground power unites.

The Ground Power Unite made by MSM GROUP


EXCALIBUR GROUP

EXCALIBUR ARMY Ltd. is an internationally respected defence industry company, whose products have proved successful in national as well as in foreign defence and security sector. The company was established in 1995.

Main ActivitiesSales of military vehicles and spare parts – Maintenance and repairs of military vehicles – Production of spare parts and military vehicles – Modernizations of wheeled and tracked vehicles – Sales of weapons and ammunition – Expedition equipments and spare parts – Servicing at customers‘ premises – Long-term storage of equipments – Environmental-aware disposal of equipments – Engineering

KARBOX is a Czech company with over fifty years traditional production of quality containers and container and box bodies for trucks. Containers, containerized facilities and box bodies are delivered including custom made internal equipment in various designs e.g. kitchens, laundries, field hospitals, ablution containers etc. KARBOX is currently supplying its containers into the NATO military camps through NSPA (NATO Support and Procurement Agency).

TITUS® – MRAP vehicle chassis TATRA 6x6

T 815-7M0R39 29 306 6 x 6.1R6 x 6 HIGH MOBILITY HEAVY DUTY UNIVERSAL CONTAINER CARRIER

T 815-780R59 19 270 4 x 4.1R4 x 4 HIGH MOBILITY HEAVY DUTY

CARGO / TROOP CARRIER

T 815-790R99 38 300 8 x 8.1R8 x 8 HMHD REFUELER 18,000 Liters

TATRA PLASAN, the first 4x4 logistic truck with armoured cab, which meets the stanag 3-3a/3b level

T 810-1R0R26 13 177 6 x 6.1R6 x 6 CARGO TRUCK / TROOP

CARRIER

Heavy Duty High Mobility Tactical and Logistic Trucks TATRA

T 815-790R39 29 300 6x6.1R6x6 HMHD UNIVERSAL

CONTAINER CARRIER

T 815-7Z0R9T 44 440 8x8.1R8x8 HMHD RECOVERY VEHICLE

www.tatratrucks.comwww.excaliburarmy.com www.karbox.cz

MEMBER OF:ČLEN SKUPINY:www.msm.sk

MSM GROUP, s.r.o. Kasárenská 8, 911 05 Trenčín, Slovak Republic Reg No.: 46553509, VAT ID No.: 2023455577

MSM Martin, s.r.o.Kasárenská 8, 911 05 TrencinSlovak Republicphone: +421 326 527 598fax: +421 326 523 176e-mail: [email protected]

Bratislava

NOVÁKYBANSKÁBTRENČÍN

Košice

BYSTRICA

DUBNICAINADIVÁHOM SNINA

MSM Martin, s.r.o.Sladkovicova 29, 974 03 Banska BystricaSlovak Republicphone: +421 484 345 600fax: +421 484 345 602e-mail: [email protected]

ZVS Holding, a.s.Ľ.Štúra 1, 018 41 Dubnica n/VáhomSlovak Republicphone: +421 903 654 346e-mail: [email protected]

ZVS Impex, a.s.Ľ.Štúra 1, 018 41 Dubnica n/VáhomSlovak Republicphone: +421 915 885 695e-mail: [email protected]

MSM Martin, s.r.o.Duklianska 60, 972 71 Nováky, Slovak Republicphone: +421 465 180 111, fax: +421 465 180 201, e-mail: [email protected]

msm group · msm group, kasrensk 8, 911 05 trenn, slovak republic, msm group, kasrensk 8, 911 05...

Documents