mss industrial products catalogue

MSS INDUSTRIAL PRODUCTS CATALOGUE

Engineering Connections

İNKA; inşaat, otomotiv, yenilenebilir enerji sektörleri için standartlara uygun kaliteli bağlantı elemanları tasarlayan, üreten tamamı Türk sermayeli endüstri firmasıdır.1986 yılında kurulan İNKA; sac, paslanmaz sac ve alüminyum profil işleme süreçlerindeki uzmanlığı ile sektörünün lider kuruluşudur.Dev inşaat projelerinin yapıldığı Ortadoğu ülkelerinin yanı sıra Rusya ve Türk Cumhuriyetlerinde de bilinen İNKA, 20 yıldır ihracatının %80’ini başta Almanya ve İsviçre olmak üzere Batı Avrupa’ya yapan, güvenilir bir markadır.

Bir bakışta İNKA

Engineering Connections

İNKA is an industry company with completely Turkish capital that designs and produces quality fixing materials in accordance with the standards for construction and automative sectors as well as renewable energy sectors.Being founded in the year of 1986, İNKA has become the lead-er establishment of the sector thanks to its specialty in such processes as the processing of sheet metal, stainless sheet and aluminium profile. Being known in the Middle East countries where huge construction projects take place in addition to Russia and the Turkish Republics, İNKA is a reliable brand which has been per-forming 80% of its export activities to Western Europe, particularly to Germany and Switzerland for 20 years.

İNKA at a glance

Some References from MENA

• King Abdullah Bin Abdulaziz Third Saudi Expansion of Holy Haram - Makkah/ K.S.A.• King Abdul Aziz International Airport Project – Jeddah/ K.S.A.• Madinah Airport – Madinah/K.S.A.• North South Railway Project – K.S.A.• Jabal Omar Development Project – Makkah/K.S.A.• University of Dammam – Dammam/K.S.A.• Baha University – Baha/K.S.A.• KAP-1 Project – Riyadh/K.S.A.• Sang Housing Project – Riyadh/K.S.A.• Taif University – Taif/K.S.A.• Al Iman General Hospital – Riyadh/K.S.A.• King Faisal Medical City – Riyadh/K.S.A.• Al Tuhami/Abha/Hetin Sports Clubs – K.S.A.• Rafha University – K.S.A.• New Doha International Airport – Doha/Qatar• Qatar Foundation Education City South Site Utility Tunnels – Doha/Qatar• New Rayyan Palace – Doha/Qatar• Qatar Foundation Research & Development Complex – Doha/Qatar• Qatar Foundation Education City West Car Park – Doha/Qatar• Lekhwiya Sports Stadium – Doha/Qatar• St. Regis Hotel and Residential Towers – Doha/Qatar• Meeza Data Center Project MV3 – Doha/Qatar• Qatar Foundation Offsite Warehouse and Distribution Center – Doha/ Qatar• Samrya Business Towers – Doha/Qatar• High Rise Office Building – Doha/Qatar• Abu Dhabi International Airport Expansion – Abu Dhabi/U.A.E.• Innovation Center for Borouge – Abu Dhabi/U.A.E.• Jumeirah Villages – Dubai/U.A.E.• Cairo International Airport – Cairo/Egypt• American Embassy – Iraq• Al Najaf Teaching Hospital – Najaf/Iraq• Erbil Airport – Erbil/Iraq• Beit Misk – Beirut/Lebanon• Olive – Beirut/Lebanon• Level 27 – Beirut/Lebanon• Al Fateh University – Tripoli/Libya• Al Tadamon Twin Towers – Tripoli/Libya• 20.000 Housing Project in West Benghazi – Benghazi/Libya• Military Headquarter – Jordan• American Embassy of Kabul – Kabul/Afghanistan• American Embassy of Islamabad – Islamabad/Pakistan

PART 1 - GENERAL

1.1- SUMMARY

A. Contractor shall provide all Labour, Materials, Contractor’s Equipment and Plant to fully execute the requirements to furnish, deliver, and install the works as described in the Drawings and Specification, or implied therefrom, and in accordance with the Contract. It is the intent of this Specification that the work performed pursuant hereto be complete and acceptable in every respect for its intended purpose. Nothing in this specification section shall limit the scope of work as required by the Contract.

1.2 - REFERENCES

DESIGN SPECIFICATIONS :

A- ASME B31.1 : Power Piping Design

B- ASME B31.3 : Process Piping Design

C- ASME B31.9 : Building Services Piping

D- NFPA 13: Standard for the Installation of Sprinkler Systems.

E- DIN EN 13480-1/BS EN 13480-1 : Process Piping Design Part 1: Materials

F- DIN EN 13480-2/BS EN 13480-2 : Part 2: Materials

G- DIN EN 13480-3/BS EN 13480-3 : Part 3: Design and Calculation

H- DIN EN 13480-4/BS EN 13480-4 : Part 4: Fabrication and installation

I- DIN EN 13480-5/BS EN 13480-5 : Part 5: Inspection and testing

J- DIN EN 13480-6/BS EN 13480-6 : Part 6: Additional requirements for buried piping

K- DIN EN 13480-7/BS EN 13480-7 : Part 7: Guidance on the use of conformity assessment procedures

L- DIN EN 13480-8/BS EN 13480-8 : Additional requirements for aluminium and aluminium alloy piping

M- Factory Mutual FM Approval Standard for Pipe Hanger Components for Automatic Sprinkler System

N- UL: Pipe Hanger Equipment for Protection Service

MANUFACTURING SPECIFICATIONS :

A- MSS SP 58 : Pipe Hangers and Supports, Materials, Design, Manufacture, Selection, Application, Installation

B- MSS SP 69 : Pipe Hangers and Supports – Selection and Application

C- MSS SP 89 : Pipe Hangers and Supports – Fabrication and Installation Practices

D- BS 3974 Part 1 : Pipe Hangers, slider and roller type supports

E- BS 3974 Part 2 : Pipe Clamps, cages,cantilevers and attachments to beams

Technical Data

MATERIAL SPECIFICATIONS :

A- MSS SP 58 : TABLE A2M/A2 : Materials and Allowable Stresses

WELDING SPECIFICATIONS :

A- ASME SECTION IV : ASME BOILER AND PRESSURE VESSEL CODE Qualification Standard for welding and brazing procedures,welders,brazers and welding and brazing operators

B- AWS D1.1 : Structural Welding Code/Steel

COATING SPECIFIATIONS:

A- Hot Dipped Galvanisation (HDG) : ASTM A153/153M-09

B- Electrogalvanisation : ASTM B633/ASTM F 1941

1.3 - QUALITY ASSURANCE

A- Welding: Qualify processes and operators according to ASME Boiler and Pressure Vessel Code: Section IX, “Weld-ing and Brazing Qualifications.”

B- NFPA Compliance: Comply with NFPA 13 for hangers and supports used as components of fire protection system. Include listing and labeling by UL Listed or FM Approval.

C- Engineering Responsibility: Design and preparation of Shop Drawings and calculations for each multiple pipe support, trapeze, and seismic restraint by a qualified professional engineer.

1. Professional Engineer Qualifications: A professional engineer who is legally registered and qualified to practice in jurisdiction where Project is located and who is experienced in providing engineering services of the kind indicated. Engineering services are defined as those performed for installations of hangers, supports, and seismic restraints that are similar to those indicated for the Project in material, design, and extent.

D- MSS (Manufacturers Standardization Society) Compliance: Comply with the latest revision of MSS Standards spec-ified herein.

E- Manufacturer that employ a Quality Management System complying with the program described in ISO 9001-2008 , ISO 14001-2004 and OHSAS 18001-2007.

F- Steel pipe hangers and supports shall have the manufacturer’s name and applicable size stamped in the part itself for identification.

1.4 - SUBMITTALS

A. Product Data: For each type of Horizontal Piping Hangers and Supports, Vertical Pipe Supports, Building Attach-ments, Saddles and Shields and Thermal Hanger Shield Inserts indicated.

/ ASTM A123A/123M-02

PART 2 – PRODUCTS

2.1 - MANUFACTURER

A. Subject to compliance with requirements, provide products by INKA Fixing Systems, Istanbul-Turkey.

2.2 - HORIZONTAL PIPING HANGERS AND SUPPORTS

A. Select size of hangers and supports to exactly fit pipe size for bare piping, and around piping insulation with saddle or shield for insulated piping. Unless otherwise indicated, install the following types:

1) INKA Standard Clevis Hanger (IEKCHL) (MSS Type 1) : For suspension of noninsulated or insulated station-ary pipes, DN15 to DN750.

2) INKA Double Bolt Pipe Clamp (MSS Type 3); For suspension of pipes,DN20 to DN600, requiring damp flexibility and up to 4 pipes, DN20 to DN600, requiring damp flexibility and up to 4 inches (100 mm) of insulation.

3) INKA Steel Pipe Clamps (MSS Type 4); For suspension of cold and hot pipes, DN15 to DN600, if little or no insulation is required.

4) INKA Adjustable Steel Band Hanger (Sprinkler Installation Clamp)(MSS Type 7): For suspension of nonin-sulated stationary pipes and sprinkler systems, DN15 to DN250.

5) INKA Adjustable Swivel-Ring Band Hangers (MSS Type 10): For suspension of noninsulated stationary pipes, DN15 to DN250.

6) INKA U-Bolt (IERUB) (MSS Type 24): For support of heavy pipes, DN15 to DN750.

7) INKA Pipe Strap (IEKSPS)(MSS Type 26): For support of pipes not subject to expansion or contraction.

8) INKA Pipe Slide & Slide Plate (MSS Type-35) : Designed to support insulated,or non-insulated stationery pipes allowing horizontal movements.

9) INKA Single Pipe Rolls (MSS Type 41): For suspension of pipes, DN25 to DN750, from 2 rods if longitudinal movement caused by expansion and contraction might occur.

10) INKA Adjustable Roller Hangers (MSS Type 43): For suspension of pipes, DN65 to DN500), from single rod if horizontal movement caused by expansion and contraction might occur.

11) INKA Pipe Roll Comple (MSS Type 44): For support of pipes, DN50 to DN1050, if longitudinal movement caused by expansion and contraction might occur but vertical adjustment is not necessary.

12) INKA Pipe Roll and Plate (MSS Type 45): For support of pipes, DN50 to DN600, if small horizontal move-ment caused by expansion and contraction might occur and vertical adjustment is not necessary.

13) INKA Adjustable Pipe Roll and Base Units (MSS Type 46): For support of pipes, DN50 to DN750, if vertical and lateral adjustment during installation might be required in addition to expansion and contraction.

2.3 - VERTICAL PIPE SUPPORTS

A. Select size of vertical piping clamps to exactly fit pipe size of bare pipe. Unless otherwise indicated , install one of the following

1) INKA Riser Clamp (IEKRC)(MSS Type 8) for support of pipe risers, DN20 to DN500.

2) INKA Heavy Duty Riser Clamp (IEKHRC) (MSS Type 42): For support of pipe risers, DN20 to DN500, if longer ends are required for riser.

2.4 - BUILDING ATTACHMENTS

A. INKA Center-Beam Clamps (MSS Type 21): For attaching to center of bottom flange of beams.

B. INKA Welded Beam Attachment (MSS Type 22): For attaching to bottom of beams if loads are considerable and rod sizes are large.

C. INKA Top Beam Clamp (MSS Type 25): For top of beams if hanger rod is required tangent to flange edge

D. INKA Side Beam Clamps (MSS Type 27): For bottom of steel I-beams.

E. Welded-Steel Brackets: For support of pipes from below, or for suspending from above by using clip and rod. Use one of the following for indicated loads:

1) INKA Light Welded Steel Bracket (MSS Type 31): 750 Ib (340 kg).

2) INKA Medium Welded Steel Bracket (MSS Type 32): 1500 Ib (680 kg).

3) INKA Heavy Welded Steel Bracket (MSS Type 33): 3000 Ib (1360 kg).

F. INKA Plate Lugs (MSS Type 57): For attaching to steel beams if flexibility at beam is required.

2.5 - SADDLES AND SHIELDS

A. INKA Pipe-Covering Protection Saddles (MSS Type 39): To fill interior voids with insulation that matches adjoining insulation

B. INKA Protection Shield (MSS Type 40): To prevent crushing insulation.

2.6 - THERMAL HANGER SHIELD INSERTS

A. Insulation Insert material for cold piping;

1) INKA Calcium Silicate (IFITC): Water-repellent treated, ASTM C 533, Type I calcium silicate with 690kPa min. compressive strength.

2) INKA Polyurethane Insulation Block (IFITA & IFITB)

B. Insulation Insert material for hot piping;

1) INKA Calcium Silicate (IFITC): Water-repellent treated, ASTM C 533, Type I calcium silicate with 690 kPa min. compressive strength.

2) INKA Polyurethane Insulation Block (IFITA & IFITB): For applications up to 100 °C

C. For Trapeze or Clamped System: Insert and shield cover entire circumference of pipe.

D. For Clevis or Band Hanger: Insert and shield cover lower 180 degrees of pipe.

PART 3 – HANGER AND SUPPORT INSTALLATION

A. Steel Pipe Hanger Installation: Comply with MSS SP-69 and MSS SP-89. Install hangers, supports, clamps, and attachments as required to properly support piping from building structure.

B. Trapeze Pipe Hanger Installation: Comply with MSS SP-69 and MSS SP-89. Arrange for grouping of parallel runs of horizontal piping and support together on field-fabricated trapeze pipe hangers.

1) Pipes of Various Sizes: Support together and space trapezes for smallest pipe size or install intermediate supports for smaller diameter pipes as specified above for individual pipe hangers.

2) Field fabricate from ASTM A 36/A 36M, steel shapes selected for loads being supported. Weld steel ac-cording to AWS D1.1.

C. Metal Framing System Installation: Arrange for grouping of parallel runs of piping and support together on field-assembled metal framing systems.

D. Thermal-Hanger Shield Installation: Install in pipe hanger or shield for insulated piping.

E. Fastener System Installation:

1) Install powder-actuated fasteners for use in lightweight concrete or concrete slabs less than 100 mm thick in concrete after concrete is placed and completely cured. Use operators that are licensed by powder-ac-tuated tool manufacturer. Install fasteners according to powder-actuated tool manufacturer’s operating manual.

2) Install INKA anchors in concrete after concrete is placed and completely cured.

F. Pipe Stand Installation: Assemble components and mount on smooth surface. Do not penetrate membrane.

G. Install hangers and supports complete with necessary inserts, bolts, rods, nuts, washers, and other accessories.

H. Install hangers and supports to allow controlled thermal and seismic movement of piping systems, to permit free-dom of movement between pipe anchors, and to facilitate action of expansion joints, expansion loops, expansion bends, and similar units.

I. Install lateral bracing with pipe hangers and supports to prevent swaying.

J. Install building attachments within concrete slabs or attach to structural steel. Install additional attachments at concentrated loads, including valves, flanges, and strainers, DN65 and larger and at changes in direction of pip-ing. Install concrete inserts before concrete is placed; fasten inserts to forms and install reinforcing bars through openings at top of inserts.

K. Load Distribution: Install hangers and supports so piping live and dead loads and stresses from movement will not be transmitted to connected equipment.

L. Pipe Slopes: Install hangers and supports to provide indicated pipe slopes and so maximum pipe deflections allowed by ASME B31.9 (for building services piping) are not exceeded.

M. Insulated Piping: Comply with the following;

1) Attach clamps and spacers to piping.

a) Piping Operating above Ambient Air Temperature: Clamp may project through insulation.

b) Piping Operating below Ambient Air Temperature: Use thermal-hanger shield insert with clamp sized to match OD of insert.

c) Do not exceed pipe stress limits according to ASME B31.1 for power piping and ASME B31.9 for building services piping.

2) Install MSS SP-58, Type 39, protection saddles if insulation without vapor barrier is indicated. Fill interior voids with insulation that matches adjoining insulation.

3) Install MSS SP-58 & SP-69Type 40, protective shields on stormwater, domestic cold and hot water piping with vapor barrier. Shields shall span an arc of 180 degrees.

4) Shield Dimensions for Pipe: Not less than the following

a) DN 8 to DN 90: 305 mm long and 1.22 mm thick.

b) DN 100: 305 mm long and 1.52 mm thick.

c) DN 125 and DN 150: 457 mm long and 1.52 mm thick.

d) DN 200 to DN 350: 610 mm long and 1.91 mm thick.

e) DN 400 to DN 600: 610 mm long and 2.67 mm thick.

5) Insert Material: Length at least as long as protective shield.

6) Thermal-Hanger Shields: Install with insulation same thickness as piping insulation.

PART 4 – METAL FABRICATIONS

A. Cut, drill, and fit miscellaneous metal fabrications for trapeze pipe hangers and equipment supports.

B. Fit exposed connections together to form hairline joints. Field weld connections that cannot be shop welded be-cause of shipping size limitations.

C. Field Welding: Comply with AWS D1.1 procedures for shielded metal arc welding, appearance and quality of welds, and methods used in correcting welding work, and with the following:

1) Use materials and methods that minimize distortion and develop strength and corrosion resistance of base metals.

2) Obtain fusion without undercut or overlap.

3) Remove welding flux immediately.

4) Finish welds at exposed connections so no roughness shows after finishing and contours of welded surfaces match adjacent contours.

PART 5 – SCHEDULE

Maximum Horizontal Pipe Hanger and Support Spacing

Nominal Pipe orTube Size

Acc. to MSS SP 58 Acc. to NFPA 13

Steel Pipe Copper Pipe Steel Pipe Copper Tube

Water Service Vapor Service Water Service Vapor Service

NPS DN ft mt ft mt ft mt ft mt ft mt ft mt

1/4” 8 5 1.5 5 1.5

3/8” 10 7 2.1 8 2.4 5 1.5 6 1.8

1/2” 15 7 2.1 8 2.4 5 1.5 6 1.8

3/4” 20 7 2.1 9 2.7 5 1.5 7 2.1 8 2.44

1” 25 7 2.1 9 2.7 6 1.8 8 2.4 12 3.66 8 2.44

1 1/4” 32 7 2.1 9 2.7 7 2.1 9 2.7 12 3.66 10 3.05

1 1/2” 40 9 2.7 12 3.7 8 2.4 10 3.0 15 4.57 10 3.05

2” 50 10 3.0 13 4.0 8 2.4 11 3.4 15 4.57 12 3.66

2 1/2” 65 11 3.4 14 4.3 9 2.7 13 4.0 15 4.57 12 3.66

3” 80 12 3.7 15 4.6 10 3.0 14 4.3 15 4.57 12 3.66

3 1/2” 90 13 4.0 16 4.9 11 3.4 15 4.6 15 4.57 15 4.57

4” 100 14 4.3 17 5.2 12 3.7 16 4.9 15 4.57 15 4.57

5” 125 16 4.9 19 5.8 13 4.0 18 5.5 15 4.57 15 4.57

6” 150 17 5.2 21 6.4 14 4.3 20 6.1 15 4.57 15 4.57

8” 200 19 5.8 24 7.3 16 4.9 23 7.0 15 4.57 15 4.57

10” 250 22 6.7 26 7.9 18 5.5 25 7.6

12” 300 23 7.0 30 9.1 19 5.8 28 8.5

14” 350 25 7.6 32 9.8

16” 400 27 8.2 35 10.7

18” 450 28 8.5 37 11.3

20” 500 30 9.1 39 11.9

24” 600 32 9.8 42 12.8

30” 750 33 10.1 44 13.4

Adjustable Swivel Ring Band Hanger ............................................. IE-10

Center Beam Clamp ........................ IE-21

Welded Beam Attachment ............ IE-22

U-Bolt ............................................... IE-24

Top Beam Clamp ............................ IE-25

Std. Pipe Strap ................................. IE-26

Std. Pipe Strap with Rubber ........ IE-26 A

Pipe Strap ..................................... IE-26 B

Pipe Strap with Rubber ................ IE-26 C

Selection of Pipe Strap for Insulated Pipes ............................................. IE-26 S

C O N T E N TStd. Clevis Hanger ............................. IE-1

Std. Clevis Hanger with Rubber ...... IE-1A

Clevis Hanger .................................. IE-1B

Clevis Hanger with Rubber ............. IE-1C

Selection of Clevis Hanger for Insulated Pipes ................................ IE-1S

Double Bolt Pipe Clamp ....................IE-3

Steel Pipe Clamp................................IE-4

Adjustable Steel Band Hanger ......... IE-7

Riser Clamp ........................................IE-8

Riser Clamp with Rubber .............. IE-8A

Heavy Duty Riser Clamp ................ IE-42

Adjustable Roller Hanger ............... IE-43

Pipe Roll Complete ......................... IE-44

Roller Chair .................................... IE-44A

Pipe Roll and Plate .......................... IE-45

Adjustable Pipe Roll and Base ...... IE-46

Plate Lug ...........................................IE-57

Polyurethane Insulation Block ....... IE-60

Calcium Silicate Insulation Block.................................................. IE-61

C O N T E N TAdjustable Side Beam Clamp ........IE-27

Light Welded Steel Bracket .............. IE-31

Medium Welded Steel Bracket ...... IE-32

Heavy Welded Steel Bracket .......... IE-33

Sliding Guided Support-Normal .... IE-35

Sliding Guided Support-Heavy ... IE-35 A

Anchor Support-Normal .............. IE-35B

Anchor Support-Heavy................. IE-35C

Protection Saddle ............................ IE-39

Single Pipe Roll ................................. IE-41

Std. Adjustable Clevis Hanger

IE-1

Size Range

1/2” through 36”

Material

Carbon Steel acc.to the MSS SP 58-TABLE A2/A2M

Service

Designed for suspension of insulated or non-insulated stationary pipes.

Installation

Vertical adjustments are possible once the pipe is in place. The lower nut is used to adjust the pipeline to the required elevation. The top nut is used to prevent loosening due to the vibration. The top nut should be tightened after adjustment. The top nut must securely be tightened to assure proper performance of hanger after adjustment.

Ordering

Specify pipe size, figure number, name and finish.

Finish

Electro-Galvanization acc. to ASTM B 633/ASTM F 1941

Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/123

Approvals

Complies with Manufacturer’s Standardization Society MSS SP-58 & MSS SP-69 - Type 1

Complies with NFPA-13 Standard for the Installation of Sprinkler Sys-tems.

Certificaton

FM Approval and UL listed

Code NoCode No for HDG

Size size of steelA

C D E F GMax.

Recom.Weight

(per 100)

Inch DN OD Upper Lower mm mm mm mm Load KN Kg

IEKCHL015 IEKCHL015H 1/2” (15) 21,3 3x25 3x25 M10 64 48,5 28,5 11,0 M6 2,7 15,4

IEKCHL020 IEKCHL020H 3/4” (20) 26,9 3x25 3x25 M10 72 54,0 34,0 13,0 M6 2,7 17,7

IEKCHL025 IEKCHL025H 1” (25) 33,7 3x25 3x25 M10 82 60,5 40,5 16,0 M6 2,7 20,0

IEKCHL032 IEKCHL032H 1 1/4” (32) 42,4 3x25 3x25 M10 96,5 70,5 50,5 22,0 M6 2,7 20,4

IEKCHL040 IEKCHL040H 1 1/2” (40) 48,3 3x25 3x25 M10 108,5 79,5 59,5 27,0 M8 2,7 25,0


IEKCHL065 IEKCHL065H 2 1/2” (65) 76,1 5x30 5x30 M12 162 117,0 93,0 51,0 M10 5 63,6

IEKCHL080 IEKCHL080H 3” (80) 88,9 5x30 5x30 M12 171,5 120,5 96,5 44,0 M10 5 69,0

IEKCHL090 IEKCHL090H 3 1/2” (90) 101,6 5x30 5x30 M12 184,5 127,0 103,0 44,0 M10 5 77,2

IEKCHL100 IEKCHL100H 4” (100) 114,3 6x30 5x30 M16 204,5 140,5 108,5 49,0 M10 6,3 96,7




IEKCHL250 IEKCHL250H 10” (250) 273,0 10x45 6x45 M20 400 256,0 216,0 57,0 M20 16 399,5









Ordering

Finish


Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/153M-09 / ASTMA 123A/123M-02

Approvals

Complies with Manufacturer’s Standardization Society MSS SP-58 &

Certification

FM Approval and UL listed

MSS SP-69 - Type 1

Complies with NFPA-13 Standard for the Installation of Sprinkler Systems

Std. Adjustable Clevis Hanger with Rubber

IE-1A

Size Range


Material


Rubber Lining: EPDM Lining with noise reduction level up to 15dB acc. to DIN 4109

Service

Designed for suspension of insulated or non-insulated stationary pipes.

Installation

Vertical adjustments are possible once the pipe is in place. The lower nut is used to adjust the pipeline to the required elevation. The top nut is used to prevent loosening due to the vibration. The top nut should be

tightened after adjustment. The top nut must securely be tightened to assure proper performance of hanger after adjustment.

Ordering


Finish



Approvals

Complies with Manufacturer’s Standardization Society MSS SP-58 & MSS SP-69 - Type 1 (Clevis Hanger)


Size size of steelA

C D E FG

Max. Recom.Weight

(per 100)


IEKCHLR015 IEKCHLR015H 1/2” (15) 21,3 3x25 3x25 M10 64 48,5 28,5 11,0 M6 2,7 15,4

IEKCHLR020 IEKCHLR020H 3/4” (20) 26,9 3x25 3x25 M10 72 54,0 34,0 13,0 M6 2,7 17,7

IEKCHLR025 IEKCHLR025H 1” (25) 33,7 3x25 3x25 M10 82 60,5 40,5 16,0 M6 2,7 20,0

IEKCHLR032 IEKCHLR032H 1 1/4” (32) 42,4 3x25 3x25 M10 96,5 70,5 50,5 22,0 M6 2,7 20,4

IEKCHLR040 IEKCHLR040H 1 1/2” (40) 48,3 3x25 3x25 M10 108,5 79,5 59,5 27,0 M8 2,7 25,0


IEKCHLR065 IEKCHLR065H 2 1/2” (65) 76,1 5x30 5x30 M12 162 117,0 93,0 51,0 M10 5 63,6

IEKCHLR080 IEKCHLR080H 3” (80) 88,9 5x30 5x30 M12 171,5 120,5 96,5 44,0 M10 5 69,0

IEKCHLR090 IEKCHLR090H 3 1/2” (90) 101,6 5x30 5x30 M12 184,5 127,0 103,0 44,0 M10 5 77,2

IEKCHLR100 IEKCHLR100H 4” (100) 114,3 6x30 5x30 M16 204,5 140,5 108,5 49,0 M10 6,3 96,7




IEKCHLR250 IEKCHLR250H 10” (250) 273,0 10x45 6x45 M20 400 256,0 216,0 57,0 M20 16 399,5









tightened after adjustment. The top nut must securely be tightened to assure proper performance of hanger after adjustment.

Ordering

Finish

Electro-Galvanization acc. to ASTM B 633/ASTM F 1941 Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/153M-09 / ASTMA123A/123M-02

Approvals


Adjustable Clevis Hanger

IE-1B

Size Range


Material

Carbon Steel acc. to the MSS SP 58-TABLE A2/A2M

Service

Designed as an economical product for suspension of insulated or non-insulated stationary pipes.

Installation

Vertical adjustments are possible once the pipe is in place. The lower nut is used to adjust the pipeline to the required elevation. The top nut is used to prevent loosening due to the vibration. The top nut should be tightened after adjustmentThe top nut must securely be tightened to assure proper performance of hanger after adjustment.

Ordering


Finish



Approvals



Size Maximum Selected OD (mm)

Size of steelA

C D E FG

Max. Recom.

Weight (per 100)


IEKCHLM015 IEKCHLM015H 1/2” (15) 21,3 23,0 2x20 2x20 M10 64,0 48,5 28,5 11,0 M6 2,5 10,2

IEKCHLM020 IEKCHLM020H 3/4” (20) 26,9 28,0 2x20 2x20 M10 72,0 54,0 34,0 13,0 M6 2,5 12,4

IEKCHLM025 IEKCHLM025H 1” (25) 33,7 36,0 2x20 2x20 M10 82,0 60,5 40,5 16,0 M6 2,5 14,2

IEKCHLM032 IEKCHLM032H 1 1/4” (32) 42,4 44,0 2x20 2x20 M10 96,5 70,5 50,5 22,0 M6 2,5 15,9



IEKCHLM055 IEKCHLM055H 73,0 3x25 3x25 M12 157,5 118,0 90,0 40,0 M10 3,5 35,9





















Ordering

Finish


Approvals


Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/153M-09 / ASTMA123A/123M-02

Adjustable Clevis Hanger

Size Range


Material


Service


Installation

Vertical adjustments are possible once the pipe is in place. The lower nut is used to adjust the pipeline to the required elevation. The top nut is used to prevent loosening due to the vibration. The top nut should be tightened after adjustmentThe top nut must securely be tightened to assure proper performance of hanger after adjustment.

Ordering


Finish



Approvals




Size of steelA

C D E FG

Max. Recom.

Weight (per 100)




























IE-1B

Ordering

Finish


Approvals



Adjustable Clevis Hanger with Rubber

IE-1C

Size Range


Material



Service


Installation

Vertical adjustments are possible once the pipe is in place. The lower nut is used to adjust the pipeline to the required elevation. The top nut is used to prevent loosening due to the vibration. The top nut should

be tightened after adjustment the top nut must securely be tightened to assure proper performance of hanger after adjustment.

Ordering


Finish



Approvals




Size of steelA

C D E FG

Max. Recom.

Weight (per 100)


IEKCHLMR015 IEKCHLMR015H 1/2” (15) 21,3 22 2x20 2x20 M10 64 48,5 28,5 11 M6 2,5 10,2

IEKCHLMR020 IEKCHLMR020H 3/4” (20) 26,9 27 2x20 2x20 M10 72 54 34 13 M6 2,5 12,4

IEKCHLMR025 IEKCHLMR025H 1” (25) 33,7 35 2x20 2x20 M10 82 60,5 40,5 16 M6 2,5 14,2

IEKCHLMR032 IEKCHLMR032H 1 1/4” (32) 42,4 43 2x20 2x20 M10 96,5 70,5 50,5 22 M6 2,5 15,9

IEKCHLMR040 IEKCHLMR040H 1 1/2” (40) 48,3 49 2x20 2x20 M10 108,5 79,5 59,5 27 M8 2,5 17,3

IEKCHLMR050 IEKCHLMR050H 2” (50) 60,3 61 2x20 2x20 M10 130 98 78 41 M8 2,5 20,1

IEKCHLMR055 IEKCHLMR055H 72 3x25 3x25 M12 157,5 118 90 40 M10 3,5 35,9

IEKCHLMR065 IEKCHLMR065H 2 1/2” (65) 76,1 76,2 3x25 3x25 M12 162 117 93 40 M10 3,5 37,9

IEKCHLMR072 IEKCHLMR072H 85 3x25 3x25 M12 170,5 123,7 95 40 M10 3,5 38,9

IEKCHLMR080 IEKCHLMR080H 3” (80) 88,9 89 3x25 3x25 M12 171,5 120,5 96,5 41 M10 3,5 44,5

IEKCHLMR085 IEKCHLMR085H 97 3x25 3x25 M12 178 125 99 41 M10 3,5 42,2

IEKCHLMR090 IEKCHLMR090H 3 1/2” (90) 101,6 102 3x25 3x25 M12 184,5 127 103 41 M10 3,5 49,3

IEKCHLMR095 IEKCHLMR095H 111 5x25 3x25 M16 196 132 105 43 M10 5 60,2

IEKCHLMR100 IEKCHLMR100H 4” (100) 114,3 114,5 5x25 3x25 M16 204,5 140,5 108,5 43 M10 5 62,1



IEKCHLMR125 IEKCHLMR125H 5” (125) 139,7 140 5x30 3x30 M16 232 155,5 123,5 48 M12 6,2 80,2


IEKCHLMR150 IEKCHLMR150H 6” (150) 168,3 169 5x30 5x30 M20 264,5 175,5 135,5 48 M12 8 121,3




IEKCHLMR200 IEKCHLMR200H 8” (200) 219,1 219,5 5x40 5x40 M20 331 216,5 176,5 54 M16 8,3 219,2


IEKCHLMR240 IEKCHLMR240H 253 6x40 6x40 M20 381 245 199 57 M20 11,5 378

be tightened after adjustment the top nut must securely be tightened to assure proper performance of hanger after adjustment.

Ordering

Finish



Approvals


Adjustable Clevis Hanger with Rubber

IE-1C

Size Range


Material



Service


Installation

Vertical adjustments are possible once the pipe is in place. The lower nut is used to adjust the pipeline to the required elevation. The top nut

is used to prevent loosening due to the vibration. The top nut should be tightened after adjustment the top nut must securely be tightened to assure proper performance of hanger after adjustment.

Ordering


Finish



Approvals




Size of steelA

C D E FG

Max. Recom.

Weight (per 100)


IEKCHLMR250 IEKCHLMR250H 10” (250) 273 273 6x40 6x40 M20 400 256 216 57 M20 11,5 335,1



IEKCHLMR295 IEKCHLMR295H 313 10x50 6x50 M20 445 310 245 66 M20 16,9 602


IEKCHLMR300 IEKCHLMR300H 12” (300) 323,9 329 10x50 6x50 M20 470 300 260 72 M20 16,9 485,2

IEKCHLMR350 IEKCHLMR350H 14” (350) 355,6 356 10x50 6x50 M24 517 331,5 283,5 72 M20 17 602,5

IEKCHLMR372 IEKCHLMR372H 384 10x50 6x50 M24 535 325 291 75 M20 17 710






IEKCHLMR500 IEKCHLMR500H 20” (500) 508 508 12x75 10x75 M30 720,5 455 395 102 M30 24 1830,2



IEKCHLMR600 IEKCHLMR600H 24” (600) 609,1 609,5 16x75 10x75 M30 828,5 512 452 108 M30 27 2310,5




IEKCHLMR750 IEKCHLMR750H 30” (750) 762 762 20x75 10x75 M30 1004,5 612 552 127 M30 31 3068,2




IEKCHLMR900 IEKCHLMR900H 36” (900) 914,4 914,5 22x75 12x75 M30 1170,5 701 641 158 M30 35 3365,4




is used to prevent loosening due to the vibration. The top nut should be tightened after adjustment the top nut must securely be tightened to assure proper performance of hanger after adjustment.

Ordering

Finish



Approvals


Selection Table Of Clevis Hanger For Insulated Pipes

IE-1S

Selection

Select the Pipe Size, Thickness of Insulation and the Code for Clevis Hanger

Insulation Options

Polyurathane Insulation Blocks

For details: See the catalogue page no. IE-60

Calcium Silicate


SizeTotal OD

(mm) T=13mm

Code NoTotal OD

(mm) T=20mm

Code NoTotal OD

(mm) T=25mm

Code NoTotal OD

(mm) T=30mm

Code NoInch DN OD

1/2” (15) 21,3 47,3 IEKCHLM040 61,3 IEKCHLM050 71,3 IEKCHLM055 81,3 IEKCHLM072


1” (25) 33,7 59,7 IEKCHLM050 73,7 IEKCHLM065 83,7 IEKCHLM072 93,7 IEKCHLM085

1 1/4” (32) 42,4 68,4 IEKCHLM055 82,4 IEKCHLM072 92,4 IEKCHLM085 102,4 IEKCHLM090



















Selection Table Of Clevis Hanger For

Insulated Pipes

IE-1S

Selection

Select the Pipe Size, Thickness of Insulation and the Code for Clevis Hanger

Insulation Options



Calcium Silicate


SizeTotal OD

(mm) T=40mm

Code NoTotal OD (mm)

T=50mm Code NoTotal OD

(mm) T=65mm

Code NoTotal OD

(mm) T=75mm

Code NoInch DN OD























Double Bolt Pipe Clamp

IE-3

Code No Code No for HDGSize

AL Max. Recom.

Inch mm mm Load KN

IEKDBPC020 IEKDBPC020H 3/4” (20) M12 189,0 4,0

IEKDBPC025 IEKDBPC025H 1” (25) M12 189,0 4,0

IEKDBPC032 IEKDBPC032H 1 1/4” (32) M12 192,0 4,0

















Size Range


Material


Service

Designed to suspend insulated pipe lines requiring clamp flexibility and up to 100 mm of insulation.

Installation

The spacer on the top inner bolt provides uniform space for the connect-ing eyerod or weldness eye nut.

Ordering


Finish



Approvals


Ordering

Finish


Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/153M-09 / ASTMA123A/123M-2Approvals


Steel Pipe Clamp

IE-4

Size Range


Material


Service

Designed to suspend cold and hot pipes where little or no insulation is required.

Installation

Normally used with weldless eye nut or eye rod.

Ordering


Finish

Electro-Galvanization acc. to ASTM B 633/ASTM 1941 F


Approvals



SxB A LMax. Recom. Weight (per 100)

Inch mm mm Load kN Kg

IEKSPC015 IEKSPC015H 1/2” (15) 3x25 M10 78,0 2,2 13,2

IEKSPC020 IEKSPC020H 3/4” (20) 3x25 M10 84,0 2,2 15,0

IEKSPC025 IEKSPC025H 1” (25) 3x25 M10 96,0 2,2 15,9

IEKSPC032 IEKSPC032H 1 1/4” (32) 3x25 M10 100,0 2,2 16,8









IEKSPC200 IEKSPC200H 8”. (200) 10x40 M12 356,0 7,2 295,1










Ordering

Finish

Electro-Galvanization acc. to ASTM B 633/ASTM 1941 F


Approvals


Adjustable Steel Band Hanger

IE-7

Code NoCode No For

HDG

SizeSize of Steel A

C D E Max Recom. Load Weight (per 100)

Inch mm mm mm mm KN Kg

IEKSP020 IEKSP020H 3/4” (20) 1.5x25 M10 54,5 36,5 28,5 4,0 6,7

IEKSP025 IEKSP025H 1” (25) 1.5x25 M10 63,5 42,5 34,5 4,0 7,5

IEKSP032 IEKSP032H 1 1/4” (32) 1.5x25 M10 70,5 44,5 36,5 4,0 8,8

IEKSP040 IEKSP040H 1 1/2” (40) 1.5x25 M10 75,5 46,5 38,5 4,0 9,4

IEKSP050 IEKSP050H 2” (50) 1.5x25 M10 83,5 47,5 39,5 4,0 10,6

IEKSP065 IEKSP065H 2 1/2” (65) 2,5x25 M10 100,5 56,5 48,5 6,6 20,8

IEKSP080 IEKSP080H 3” (80) 2,5x25 M10 117,5 66,5 58,5 6,6 23,6

IEKSP100 IEKSP100H 4” (100) 2,5x25 M10 143,5 80,5 72,5 6,6 28,4

IEKSP125 IEKSP125H 5” (125) 3x25 M12 175,0 98,0 88,0 7,8 40,0

IEKSP150 IEKSP150H 6” (150) 3x25 M12 196,0 105,0 95,0 7,8 45,6

IEKSP200 IEKSP200H 8” (200) 3x40 M16 262,0 145,0 132,0 12,0 96,7

IEKSP250 IEKSP250H 10” (250) 3x40 M16 357,5 214,0 201,0 12,0 123,0

Size Range


Material


Service

Designed to suspend non-insulated stationary pipes and Sprinkler system installation.

Installation

Vertical adjustments are possible once the pipe is in place. The lower nut is used to adjust the pipeline to the required elevation. The top nut must securely be tightened to assure proper performance of hanger after adjustment.

Ordering


Finish



Approvals


Complies with NFPA-13 Standard for the Installation of Sprinkler Systems.

Certificaton

FM Approval and UL listed.

Ordering

Finish



Approvals



FM Approval and UL listed.

Riser Clamp

IE-8

Size Range


Material


Service

Designed to support or hold the vertical pipe runs.The load is transmit-ted to the structure by the ears on each side.

Installation

Clamp is fitted and bolted preferably below a coupling or welded lugs on steel pipe. Clamp is designed for standard steel pipe O.D. and this must be considered in sizing the riser for other types of piping.

Ordering


Finish



Approvals



SxB A LMax. Recom. Weight (per 100)

Inch mm Load KN Kg

IEKRC015 IEKRC015H 1/2” (15) 5x30 M10 238,0 1,1 56,0

IEKRC020 IEKRC020H 3/4” (20) 5x30 M10 238,0 1,1 62,0

IEKRC025 IEKRC025H 1” (25) 5x30 M10 244,0 1,1 62,5

IEKRC032 IEKRC032H 1 1/4” (32) 6x30 M10 254,0 1,1 88,5

IEKRC040 IEKRC040H 1 1/2” (40) 6x30 M10 264,0 1,1 91,0

IEKRC050 IEKRC050H 2” (50) 6x30 M10 273,0 1,1 98,5

IEKRC065 IEKRC065H 2 1/2” (65) 6x30 M10 286,0 1,7 104,0

IEKRC080 IEKRC080H 3” (80) 6x30 M10 305,0 2,3 113,5

IEKRC090 IEKRC090H 3 1/2” (90) 6x40 M12 330,0 3,0 150,0

IEKRC100 IEKRC100H 4” (100) 6x40 M12 343,0 3,5 155,0

IEKRC125 IEKRC125H 5” (125) 6x50 M12 368,0 5,0 234,0

IEKRC150 IEKRC150H 6” (150) 6x50 M12 394,0 7,0 239,0

IEKRC200 IEKRC200H 8” (200) 10x50 M16 470,0 11,0 448,0

IEKRC250 IEKRC250H 10” (250) 10x50 M16 527,0 11,0 505,0

IEKRC300 IEKRC300H 12” (300) 12x50 M16 578,0 12,0 754,5

IEKRC350 IEKRC350H 14” (350) 12x50 M16 610,0 12,0 874,0

IEKRC400 IEKRC400H 16” (400) 16x60 M20 660,0 13,0 1475,5

IEKRC450 IEKRC450H 18” (450) 16x60 M20 711,0 13,0 1532,0

IEKRC500 IEKRC500H 20” (500) 16x60 M20 762,0 13,0 1589,0

IEKRC600 IEKRC600H 24” (600) 16x75 M20 915,0 13,0 2302,0

IEKRC750 IEKRC750H 30” (750) 16x75 M20 1030,0 13,0 2737,5

Ordering

Finish



Approvals


Riser Clamp with Rubber

IE-8A

Size Range


Material



Service

Designed to support or hold the vertical pipe runs.The load is transmit-ted to the structure by the ears on each side.


SxB AL Max. Recom.

Weight (per 100)

Inch mm mm Load KN Kg

IEKRCR015 IEKRCR015H 1/2” (15) 5x30 M10 238,0 1,1 56,0

IEKRCR020 IEKRCR020H 3/4” (20) 5x30 M10 238,0 1,1 62,0

IEKRCR025 IEKRCR025H 1” (25) 5x30 M10 244,0 1,1 62,5

IEKRCR032 IEKRCR032H 1 1/4” (32) 6x30 M10 254,0 1,1 88,5


















Installation

on steel pipe. Clamp is designed for standard steel pipe O.D. and this must be considered in sizing the riser for other types of piping.

Ordering

Finish



Approvals

Complies with Manufacturer’s Standardization Society MSS SP-58 & MSS SP-69 - Type 8 (Riser Clamp)

Adjustable Swivel Ring Steel Band Hanger

IE-10

Size Range


Material


Service

Designed to suspend non-insulated stationary pipes and Sprinkler system installation.

Installation

Vertical adjustments are possible once the pipe is in place. The swivel nut is knurled to provide a gripping surface when adjusting the pipe elevation.

Ordering


Finish



Approvals



Certificaton

FM Approval

Code No Code No For HDGSize

Size of Steel AC D E Max Recom. Load Weight (per 100)

Inch mm mm mm mm KN Kg

IEKSS020 IEKSS020H 3/4” (20) 1.5x25 M10 48,3 33,3 70,5 4,0 8,1

IEKSS025 IEKSS025H 1” (25) 1.5x25 M10 57,3 39,3 79,5 4,0 8,9

IEKSS032 IEKSS032H 1 1/4” (32) 1.5x25 M10 64,3 41,3 86,5 4,0 10,2

IEKSS040 IEKSS040H 1 1/2” (40) 1.5x25 M10 69,3 43,3 91,5 4,0 10,8

IEKSS050 IEKSS050H 2” (50) 1.5x25 M10 77,3 44,3 99,5 4,0 12,0

IEKSS065 IEKSS065H 2 1/2” (65) 2,5x25 M10 92,3 53,3 114,5 6,6 21,2

IEKSS080 IEKSS080H 3” (80) 2,5x25 M10 109,3 63,3 131,5 6,6 25,0

IEKSS100 IEKSS100H 4” (100) 2,5x25 M10 135,3 77,3 157,5 6,6 29,6

IEKSS125 IEKSS125H 5” (125) 3x25 M12 165,8 94,8 188,0 7,8 43,6

IEKSS150 IEKSS150H 6” (150) 3x25 M12 186,8 101,8 209,0 7,8 49,2

IEKSS200 IEKSS200H 8” (200) 3x40 M16 251,0 140,0 283,0 12,0 104,0

IEKSS250 IEKSS250H 10” (250) 3x40 M16 346,5 209,0 378,5 12,0 130,0

Ordering

Finish


Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/153M-09 / ASTMA123A / 123M-02

Approvals



FM Approval

Center Beam Clamp

IE-21

Code No Code No for HDG Flange WidthFlange Thickness

AC Max. Recom.

Max mm Load KN

IEFBC001 IEFBC001H 101,6 12,7 M12 60,0 4,5

IEFBC002 IEFBC002H 127,0 15,9 M12 60,0 4,5

IEFBC003 IEFBC003H 152,4 19,0 M12 60,0 4,5

Material


Service

Clamp centers the load on beam to prevent distortion

Installation

Designed to center the load under the beam flanges.

Ordering

Figure number, width of flange, name and finish.

Finish



Approvals

Complies with Manufacturer’s Standardization Society MSS SP-58 & MSS SP-69 - Type 21.

Finish



Approvals


Welded Beam Attachment

IE-22

Size Range

3/8” through 2”

Material


Service

Clamp centers the load on beam to prevent distortion

Installation

Designed for attaching hanger rod to the bottom of structral steel where heavy loads and large hanger rod sizes are required. Can be welded in place in either the upright or inverted position.

Ordering

Specify rod size, figure number, name and finish

Finish



Approvals


Code No Code No for HDGSize E

DA Max. Recom.

inch mm mm mm Load kN

IEFWBA10 IEFWBA10H 3/8” M10 32,0 M12 M10 3,0





IEFWBA26 IEFWBA26H 1” M26 51,0 M26 M26 25,0

IEFWBA30 IEFWBA30H 1 1/8” M30 70,0 M30 M30 33,0




IEFWBA50 IEFWBA50H 2” M50 95,0 M58 M50 109,0

Ordering

Finish



Approvals


U-Bolt

IE-24

Code No Code No for HDGSize B C D E

MMax. Recom.

Weight (per 100)

Inch mm mm mm mm mm Load kN Kg

IERUB015 IERUB015H 1/2” (15) 23,0 29,0 63,5 64,0 M6 2,2 5,4

IERUB020 IERUB020H 3/4” (20) 29,5 35,5 67,0 64,0 M6 2,2 5,9

IERUB025 IERUB025H 1” (25) 36,0 42,0 70,0 64,0 M6 2,2 6,4

IERUB032 IERUB032H 1 1/4” (32) 46,0 56,0 73,0 64,0 M10 5,4 17,3

IERUB040 IERUB040H 1 1/2” (40) 52,0 62,0 76,5 64,0 M10 5,4 17,7

IERUB050 IERUB050H 2” (50) 65,0 75,0 82,5 64,0 M10 5,4 19,1

IERUB065 IERUB065H 2 1/2” (65) 77,5 77,5 95,5 76,0 M10 10,0 40,9

IERUB080 IERUB080H 3” (80) 93,5 105,5 101,5 76,0 M12 10,0 44,9

IERUB090 IERUB090H 3 1/2” (90) 106,0 118,0 108,0 76,0 M12 10,0 49,5

IERUB100 IERUB100H 4” (100) 120,0 132,0 114,5 76,0 M12 10,0 52,2

IERUB125 IERUB125H 5” (125) 144,0 156,0 127,0 76,0 M12 10,0 58,1

IERUB150 IERUB150H 6” (150) 173,0 189,0 156,0 95,0 M16 16,3 108,5

IERUB200 IERUB200H 8” (200) 223,5 239,5 181,0 95,0 M16 16,3 128,5

IERUB250 IERUB250H 10” (250) 278,0 298,0 213,0 102,0 M20 24,5 217,5

IERUB300 IERUB300H 12” (300) 329,0 351,0 244,5 108,0 M20 34,1 346,9

IERUB350 IERUB350H 14” (350) 360,5 382,5 260,5 108,0 M22 34,1 372,3

IERUB400 IERUB400H 16” (400) 411,5 433,5 286,0 108,0 M24 34,1 395,0

IERUB450 IERUB450H 18” (450) 462,5 486,5 321,0 120,0 M24 44,5 612,9

IERUB500 IERUB500H 20” (500) 513,5 537,5 346,0 120,0 M24 44,5 662,8

IERUB600 IERUB600H 24” (600) 615,0 639,0 397,0 120,0 M24 44,5 776,3

IERUB750 IERUB750H 30” (750) 767,5 791,5 473,0 120,0 M24 44,5 871,7

IERUB900 IERUB900H 36” (900) 920,0 944,0 549,5 120,0 M24 44,5 1056,0

Size Range


Material


Service

Designed to support or guide the pipe runs. Supplied with four nuts.

Ordering

Specify pipe size x rod size,figure number, name.

Finish



Approvals


Finish



Approvals


Adjustable Side Beam Clamp

IE-25

Size Range

76mm through 228mm

Material


Service

Designed for top of beams if hanger rod is required tangent to flange edge.Eliminating drilling holes in structural members.

Ordering


Finish



Approvals


Code No Code No for HDGFlange Width - W [mm] Flange Thickness Max. [mm]

BoltMax. Recom.

Min. Max. Max. Load KN

IEFSBC001 IEFSBC001H 76,0 114,0 12,7 M12 1,3

IEFSBC002 IEFSBC002H 117,0 152,0 17,5 M12 1,3

IEFSBC003 IEFSBC003H 155,0 190,0 19,0 M12 1,3

IEFSBC004 IEFSBC004H 193,0 228,0 23,8 M12 1,3

Ordering

Finish



Approvals


Std. Pipe Strap

IE-26


SxBA C

ØDH L Max. Recom. Weight (per 100)

Inch mm mm mm mm mm Load KN Kg

IEKSPS015 IEKSPS015H 1/2” (15) 5x20 4,0 76,5 11,0 21,0 102,5 1,8 7,1

IEKSPS020 IEKSPS020H 3/4” (20) 5x20 7,0 80,0 11,0 27,0 106,0 1,8 9,3

IEKSPS025 IEKSPS025H 1” (25) 5x20 5,5 90,0 11,0 28,5 116,0 1,8 11,6

IEKSPS032 IEKSPS032H 1 1/4” (32) 5x20 10,0 95,5 11,0 37,5 121,5 1,8 13,3

IEKSPS040 IEKSPS040H 1 1/2” (40) 5x25 13,0 106,0 11,0 43,5 132,0 1,8 14,7

IEKSPS050 IEKSPS050H 2” (50) 5x25 19,0 120,0 11,0 55,5 146,0 1,8 16,9

IEKSPS065 IEKSPS065H 2 1/2” (65) 6x35 26,5 133,0 11,0 72,0 163,0 2,7 45,4

IEKSPS080 IEKSPS080H 3” (80) 6x35 33,0 148,5 11,0 84,5 178,5 2,7 52,5

IEKSPS090 IEKSPS090H 3 1/2” (90) 6x35 39,5 161,5 11,0 97,5 191,5 2,7 57,8

IEKSPS100 IEKSPS100H 4” (100) 6x35 46,0 177,0 13,0 110,5 217,0 3,2 70,7

IEKSPS125 IEKSPS125H 5” (125) 6x35 58,5 200,0 13,0 135,5 240,0 3,2 85,0

IEKSPS150 IEKSPS150H 6” (150) 6x35 71,0 227,0 13,0 161,0 267,0 3,2 104,1

IEKSPS200 IEKSPS200H 8” (200) 6x35 98,0 292,0 17,0 215,0 356,0 4,0 198,4

IEKSPS250 IEKSPS250H 10” (250) 10x40 125,0 376,0 17,0 273,0 440,0 4,5 260,0

IEKSPS300 IEKSPS300H 12” (300) 10x40 150,5 426,0 17,0 323,5 490,0 4,5 302,0

Size Range


Material


Service

Designed for pipes not subject to expansion or contraction.

Ordering


Finish



Approvals


Certificaton

FM Approval

Finish


Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/153M-09 ASTMA123A/123M-02

Approvals


FM Approval

Std. Pipe Strap with Rubber

IE-26A

Size Range


Material



Service

Designed for pipes not subject to expansion or contraction.

Ordering


Finish



Approvals

Complies with Manufacturer’s Standardization Society MSS SP-58 & MSS SP-69 - Type 26 (Pipe Strap)


SxBA C

ØDH L Max. Recom. Weight (per 100)

Inch mm mm mm mm mm Load KN Kg

IEKSPSR015 IEKSPSR015H 1/2” (15) 5x20 4,0 76,5 11,0 21,0 102,5 1,8 7,1

IEKSPSR020 IEKSPSR020H 3/4” (20) 5x20 7,0 80,0 11,0 27,0 106,0 1,8 9,3

IEKSPSR025 IEKSPSR025H 1” (25) 5x20 5,5 90,0 11,0 28,5 116,0 1,8 11,6

IEKSPSR032 IEKSPSR032H 1 1/4” (32) 5x20 10,0 95,5 11,0 37,5 121,5 1,8 13,3










IEKSPSR250 IEKSPSR250H 10” (250) 10x40 125,0 376,0 17,0 273 440,0 4,5 260,0


Ordering

Finish



Approvals

Complies with Manufacturer’s Standardization Society MSS SP-58 & MSS SP-69 - Type 26 (Pipe Strap)

Pipe Strap (Pipe Clip)

IE-26B

Size Range


Material


Service

Designed as an economical product for pipes not subject to expansion or contraction.

Ordering


Finish



Approvals



Max.Selected OD

SxB A C Ød H L Max. Recom.Weight

(per 100)

Inch DN OD mm mm mm mm mm mm mm Load kN Kg

IEKSPSM015 IEKSPSM015H 1/2” (15) 21,3 23,0 2x25 7,7 57,0 9,0 18,7 82 2,5 4,0

IEKSPSM020 IEKSPSM020H 3/4” (20) 26,9 29,0 2x25 10,5 63,0 9,0 24,5 88 2,5 4,6

IEKSPSM025 IEKSPSM025H 1” (25) 33,7 35,0 2x25 13,9 69,0 9,0 30,9 94 2,5 5,2

IEKSPSM032 IEKSPSM032H 1 1/4” (32) 42,4 44,0 2x25 18,2 78,0 9,0 39,7 103 2,5 6,1


IEKSPSM045 IEKSPSM045H 53,3 55,0 2x25 23,7 89,0 9,0 50,7 114 2,5 7,2




















Ordering

Finish



Approvals


IE-26B

Pipe Strap (Pipe Clip)

Size Range


Material


Service

Designed as an economical product for pipes not subject to expansion or contraction.

Ordering


Finish



Approvals



Max. Selected OD

SxB A C Ød H L Max. Recom.Weight

(per 100)









IEKSPSM250 IEKSPSM250H 10” (250) 273 275,0 5x40 131,5 336,0 13,0 268,5 376 6,1 121,9

IEKSPSM276 IEKSPSM276H 285 287,0 5x40 137,5 348,0 13,0 280,5 388 6,1 126,7













Ordering

Finish


Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/153M-09 / ASTMA123A/123m-02

Approvals


IE-26C

Pipe Strap with Rubber

Code NoCode No for

HDGSize

Max. Selected OD

SxB A C Ød H L Max. Recom. Weight (per 100)


IEKSPSMR015 IEKSPSMR015H 1/2” (15) 21,3 22,3 2x25 7,7 57,0 9,0 18,7 82 2,5 4,0

IEKSPSMR020 IEKSPSMR020H 3/4” (20) 26,9 27,9 2x25 10,5 63,0 9,0 24,5 88 2,5 4,6

IEKSPSMR025 IEKSPSMR025H 1” (25) 33,7 34,7 2x25 13,9 69,0 9,0 30,9 94 2,5 5,2

IEKSPSMR032 IEKSPSMR032H 1 1/4” (32) 42,4 43,4 2x25 18,2 78,0 9,0 39,7 103 2,5 6,1


IEKSPSMR045 IEKSPSMR045H 53,3 54,3 2x25 23,7 89,0 9,0 50,7 114 2,5 7,2


















Material



Service

Designed for support of pipes running close to walls or ceilings and not subject to expansion or contraction.

Standard Finish

* Electro-Galvanization acc. to ASTM B 633/ASTM F 1941

* Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/123

Approvals

Complies with Manufacturer’s Standardization Society MSS SP-58 & SP-69 - Type 26 (Pipe Strap)

Standard Finish


* Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/153M-09 / ASTMA123A/123M-02

Approvals


Pipe Strap with Rubber

Code NoCode No for

HDG

SizeMax.

Selected ODSxB A C Ød H L Max. Recom. Weight (per 100)


IEKSPSMR172 IEKSPSRM172H 175,3 176,3 3x25 84,7 220,0 11,0 171,7 250 4,1 47,8









IEKSPSMR250 IEKSPSMR250H 10” (250) 273 274,0 5x40 131,5 336,0 13,0 268,5 376 6,1 121,9

IEKSPSMR276 IEKSPSMR276H 285 286,0 5x40 137,5 348,0 13,0 280,5 388 6,1 126,7













IE-26C

Material



Service

Designed for support of pipes running close to walls or ceilings and not subject to expansion or contraction.

Standard Finish


* Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/123

Approvals


Standard Finish


* Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/153M-09 / ASTMA123A/123M-02

Approvals


IE-26S

Selection Table Of Pipe Strap For Insulated Pipes

Selection

Select the Pipe Size, Thickness of Insulation and the Code for Pipe Strap

Insulation Options



Calcium Silicate


Size Total OD (mm)

T= 13mmCode No

Total OD (mm)

T= 20mmCode No

Total OD (mm)

T= 25mmCode No

Total OD (mm) T= 30mm

Code No

Inch DN OD

1/2” (15) 21,3 47,3 IEKSPSM040 61,3 IEKSPSM050 71,3 IEKSPSM060 81,3 IEKSPSM070


1” (25) 33,7 59,7 IEKSPSM050 73,7 IEKSPSM060 83,7 IEKSPSM070 93,7 IEKSPSM085

1 1/4” (32) 42,4 68,4 IEKSPSM055 82,4 IEKSPSM070 92,4 IEKSPSM085 102,4 IEKSPSM090












Selection Table Of Pipe Strap For

Insulated Pipes

IE-26S

Selection

Select the Pipe Size, Thickness of Insulation and the Code for Pipe Strap

Insulation Options



Calcium Silicate


Size Total OD (mm)

T= 40mmCode No

Total OD (mm)

T= 50mmCode No

Total OD (mm)

T= 65mmCode No

Total OD (mm)

T= 75mmCode No

Inch DN OD
















Adjustable Side Beam Clamp

IE-27

Size Range

M10 through M16

Material


Service

Designed for bottom of I-Beams if hanger rod is required tangent to flange edge.Eliminating drilling holes in structural members.

Ordering


Finish



Approvals


Code No Code No for HDG SizeFlange Width [mm]

AB Max. Recom.

Min. Max. mm Load KN

IEFABCM10 IEFABCM10H M10 88,0 203,0 M10 66,0 1,3



Ordering

Finish



Approvals


Light Welded Steel Bracket

IE-31

Material

Carbon Steel acc.to the MSP SP 58-TABLE A2/A2M

Welding

Welding acc. to ASME Section IV : ASME Boiler and Pressure Vessel Code and AWS D1.1

Service

Designed to suspend hanger rod for support of light loads under 3,3 KN from a wall or structure.

Installation

Size and thickness of the back plate is governed by the load to be carried and the nature and conditions of the wall. Back plates furnished upon request.

Ordering

Specify bracket, figure number, name and finish

Finish



Approvals


Note: Special sizes can be designed to meet Project requirements.

Code No Code No for HDGA B C Max. Recom.

mm mm mm Load kN

IELWSB230 IELWSB230H 20,5 230,0 165 3,4

IELWSB330 IELWSB330H 20,5 330,0 266 3,4

IELWSB485 IELWSB485H 20,5 485,0 419 3,4

Ordering

Finish



Approvals



Medium Welded Steel Bracket

IE-32

Material


Welding


Service

Designed to suspend hanger rod for support of medium loads under 6,8 KN from a wall or structure.

Installation


Ordering


Finish



Approvals



Code No Code No for HDGA B C D Max. Recom.

mm mm mm mm Load kN

IELWSB230 IELWSB230H 25 305 102 458 6,7

IELWSB330 IELWSB330H 25 458 127 610 6,7

IELWSB485 IELWSB485H 25 610 127 762 6,7

Ordering

Finish



Approvals



Heavy Welded Steel Bracket

IE-33

Material


Welding


Service

Designed to suspend hanger rod for support of heavy loads under 13,6 KN from a wall or structure.

Installation


Ordering


Finish



Approvals



Code No Code No for HDGA B C D Max. Recom.

mm mm mm mm Load KN

IEHWSB305 IEHWSB305H 25,0 305,0 102,0 458,0 13,6

IEHWSB458 IEHWSB458H 25,0 458,0 127,0 610,0 13,6

IEHWSB610 IEHWSB610H 25,0 610,0 127,0 760,0 13,6

IEHWSB760 IEHWSB760H 25,0 760,0 127,0 915,0 13,6

IEHWSB915 IEHWSB915H 25,0 915,0 152,0 1065,0 13,6

IEHWSB1065 IEHWSB1065H 25,0 1065,0 152,0 1270,0 13,6

Ordering

Finish



Approvals



Sliding Guided Support -Normal

IE-35

Material

Carbon Steel acc.to the MSS SP 58-Table A2/A2M

Sling Bear is PTFE

Welding


Service

Designed to insulated or non-insulated stationary pipe allowing horizon-tal movements

Installation

Specify pipe size, figure number, name and finish

Finish



Approvals

Complies with Manufacturer’s standardization society MSS SP 58 & SP 69 - Type 35


Code No SizeA B C D Vertical Force Axial Force Lateral Force

mm mm mm mm kN kN kN

IEFGSN050 50 317,0 435,0 160,0 160,0 1,3 0,4 0,4

IEFGSN065 65 323,5 450,0 160,0 160,0 1,9 0,6 0,6

IEFGSN080 80 331,0 460,0 160,0 160,0 2,5 0,8 0,8

IEFGSN100 100 344,0 490,0 160,0 160,0 4,0 1,2 1,2

IEFGSN125 125 358,0 515,0 160,0 160,0 6,1 1,8 1,8

IEFGSN150 150 371,0 540,0 160,0 160,0 8,4 2,5 2,5

IEFGSN200 200 397,0 590,0 180,0 220,0 14,0 4,2 4,2

IEFGSN250 250 425,5 640,0 210,0 590,0 23,2 7,0 7,0

IEFGSN300 300 451,0 690,0 220,0 590,0 31,4 9,4 9,4

IEFGSN350 350 467,0 740,0 220,0 590,0 39,1 11,7 11,7

IEFGSN400 400 494,0 790,0 230,0 590,0 51,6 15,5 15,5

IEFGSN450 450 519,5 845,0 260,0 590,0 64,2 19,3 19,3

IEFGSN500 500 545,0 895,0 260,0 590,0 81,3 24,3 24,3

IEFGSN550 550 572,5 945,0 300,0 590,0 97,9 29,3 29,3

IEFGSN600 600 598,0 995,0 300,0 590,0 117,7 35,3 35,3

IEFGSN650 650 625,0 1045,0 300,0 590,0 136,7 41,0 41,0

IEFGSN700 700 650,5 1095,0 300,0 590,0 157,9 47,3 47,3

IEFGSN750 750 676,0 1150,0 300,0 590,0 177,5 53,3 53,3

IEFGSN800 800 701,5 1200,0 300,0 590,0 202,0 60,6 60,6

IEFGSN850 850 727,0 1250,0 300,0 590,0 224,0 67,2 67,2

IEFGSN900 900 752,0 1300,0 300,0 590,0 251,8 75,5 75,5

Installation

Finish



Approvals



Sliding Guided Support -Heavy

IE-35A

Material


Sling Bear is PTFE

Welding


Service

Designed to insulated or non-insulated stationary pipe allowing horizon-tal movements

Installation


Finish



Approvals





IEFGSH050 50 317,0 435,0 160,0 160,0 2,0 0,6 0,6

IEFGSH065 65 323,5 450,0 160,0 160,0 3,0 0,9 0,9

IEFGSH080 80 331,0 460,0 160,0 160,0 4,0 1,2 1,2

IEFGSH100 100 344,0 490,0 160,0 160,0 6,4 1,9 1,9

IEFGSH125 125 358,0 515,0 160,0 160,0 9,8 2,9 2,9

IEFGSH150 150 371,0 540,0 160,0 160,0 13,4 4,0 4,0

IEFGSH200 200 397,0 590,0 180,0 220,0 22,5 6,8 6,8

IEFGSH250 250 425,5 640,0 210,0 590,0 37,1 11,1 11,1

IEFGSH300 300 451,0 690,0 220,0 590,0 50,2 15,1 15,1

IEFGSH350 350 467,0 740,0 220,0 590,0 62,6 18,7 18,7

IEFGSH400 400 494,0 790,0 230,0 590,0 82,6 24,8 24,8

IEFGSH450 450 519,5 845,0 260,0 590,0 102,7 30,8 30,8

IEFGSH500 500 545,0 895,0 260,0 590,0 130,0 39,0 39,0

IEFGSH550 550 572,5 945,0 300,0 590,0 156,6 47,0 47,0

IEFGSH600 600 598,0 995,0 300,0 590,0 188,3 56,5 56,5

IEFGSH650 650 625,0 1045,0 300,0 590,0 218,8 65,6 65,6

IEFGSH700 700 650,5 1095,0 300,0 590,0 252,7 75,8 75,8

IEFGSH750 750 676,0 1150,0 300,0 590,0 284,0 85,2 85,2

IEFGSH800 800 701,5 1200,0 300,0 590,0 323,2 97,0 97,0

IEFGSH850 850 727,0 1250,0 300,0 590,0 358,0 107,4 107,4

IEFGSH900 900 752,0 1300,0 300,0 590,0 402,9 120,9 120,9

Installation

Finish



Approvals



Anchor Support (Normal)

IE-35B

Material


Welding


Service

Designed to support pipes and restrict freedom of movement by anchor-ing to concrete.

Installation


Finish



Approvals





IEFASN050 50 230,0 70,0 270,0 230,0 1,3 1,3 0,4

IEFASN065 65 236,5 85,0 270,0 230,0 1,9 1,9 0,6

IEFASN080 80 244,5 95,0 270,0 230,0 2,5 2,5 0,8

IEFASN100 100 257,0 120,0 270,0 230,0 4,0 4,0 1,2

IEFASN125 125 271,0 145,0 270,0 230,0 6,1 6,1 1,8

IEFASN150 150 284,0 170,0 270,0 230,0 8,4 8,4 2,5

IEFASH200 200 309,5 225,0 270,0 230,0 14,0 14,0 4,2

IEFASN250 250 336,5 275,0 900,0 1000,0 23,2 23,2 7,0

IEFASN300 300 362,0 325,0 900,0 1000,0 31,4 31,4 9,4

IEFASN350 350 378,0 375,0 900,0 1000,0 39,1 39,1 11,7

IEFASN400 400 403,0 425,0 900,0 1000,0 51,6 51,6 15,5

IEFASN450 450 428,5 475,0 900,0 1000,0 64,2 64,2 19,3

IEFASN500 500 454,0 530,0 900,0 1000,0 81,3 81,3 24,9

IEFASN550 550 479,5 580,0 900,0 1000,0 97,9 97,9 29,4

IEFASN600 600 505,0 630,0 900,0 1000,0 117,7 117,7 35,3

IEFASN650 650 530,0 680,0 900,0 1000,0 136,7 136,7 41,0

IEFASN700 700 555,5 730,0 900,0 1000,0 157,9 157,9 47,4

IEFASN750 750 581,0 780,0 900,0 1000,0 177,5 177,5 53,3

IEFASN800 800 606,5 835,0 900,0 1000,0 202,0 202,0 60,0

IEFASN850 850 632,0 885,0 900,0 1000,0 224,2 224,2 67,3

IEFASN900 900 657,0 935,0 900,0 1000,0 251,8 251,8 75,6

Installation

Finish



Approvals



Anchor Support (Heavy)

IE-35C

Material


Welding


Service

Designed to support pipes and restrict freedom of movement by anchor-ing to concrete.

Installation


Finish



Approvals





IEFASH050 50 230,0 70,0 270,0 230,0 2,0 2,0 0,6

IEFASH065 65 236,5 85,0 270,0 230,0 3,0 3,0 0,9

IEFASH080 80 244,5 95,0 270,0 230,0 4,0 4,0 1,2

IEFASH100 100 257,0 120,0 270,0 230,0 6,4 6,4 1,9

IEFASH125 125 271,0 145,0 270,0 230,0 9,8 9,8 3,0

IEFASH150 150 284,0 170,0 270,0 230,0 13,4 13,4 4,0

IEFASH200 200 309,5 225,0 270,0 230,0 22,5 22,5 6,8

IEFASH250 250 336,5 275,0 900,0 1000,0 37,1 37,1 11,1

IEFASH300 300 362,0 325,0 900,0 1000,0 50,2 50,2 15,0

IEFASH350 350 378,0 375,0 900,0 1000,0 62,6 62,6 18,8

IEFASH400 400 403,0 425,0 900,0 1000,0 82,6 82,6 24,8

IEFASH450 450 428,5 475,0 900,0 1000,0 102,7 102,7 30,8

IEFASH500 500 454,0 530,0 900,0 1000,0 130,0 130,0 39,0

IEFASH550 550 479,5 580,0 900,0 1000,0 156,6 156,6 47,0

IEFASH600 600 505,0 630,0 900,0 1000,0 188,3 188,3 56,5

IEFASH650 650 530,0 680,0 900,0 1000,0 218,8 218,8 65,6

IEFASH700 700 555,5 730,0 900,0 1000,0 252,7 252,7 75,8

IEFASH750 750 581,0 780,0 900,0 1000,0 284,0 284,0 85,2

IEFASH800 800 606,5 835,0 900,0 1000,0 323,2 323,2 96,7

IEFASH850 850 632,0 885,0 900,0 1000,0 358,7 358,7 107,6

IEFASH900 900 657,0 935,0 900,0 1000,0 402,9 402,9 120,9

Installation

Finish



Approvals



Pipe Covering Protection Saddle

IE-39

Material


Service

Designed to protect insulation from crushing.

Finish



Approvals

Complies with Manufacturer’s Standardization Society MSS SP-58 & SP-69 - Type 39

Code No Code No for HDGPipe Size Actual Cover-

ing ThicknessMax.

Load N

Saddle With Roll 1 Saddle With Roll 2 Weight Each KgInch mm Roll Code A B Roll Code A B

IEFPCPS030020 IEFPCPS030020H

3/4” 20

30 5338 IFHM01032 56 46,5 - - 46,5 0.52

IEFPCPS040020 IEFPCPS040020H 40 5338 IFHM01100 69 56,5 IFHM02100 74,5 56,5 0.95

IEFPCPS050020 IEFPCPS050020H 50 5338 IFHM01125 81 66,5 IFHM02100 84,5 66,5 1.19


1” 25

30 5338 IFHM01040 59,4 49,9 - - 49,9 0.52

IEFPCPS040025 IEFPCPS040025H 40 5338 IFHM01125 74,4 59,9 IFHM02100 77,9 59,9 0.95



1 1/4” 32

30 5338 IFHM01040 63,7 54,2 - - 54,2 0.57





1 1/2” 40

30 5338 IFHM01050 66,7 57,2 IFHM02050 74,7 57,2 0.68





2” 50

30 5338 IFHM01050 72,7 63,2 IFHM02050 80,7 63,2 0.74





Finish


Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/153M-09/ ASTMA123A/123M-02

Approvals



IE-39

Material


Service


Finish



Approvals



ing ThicknessMax.

Load N



2 1/2” 65

30 5338 IFHM01065 82,1 71,1 IFHM02050 88,6 71,1 0.79






3” 80

30 5338 IFHM01065 88,2 77,2 IFHM02050 94,7 77,2 0.79






3 1/2” 90

30 5338 IFHM01080 94,8 83,8 IFHM02050 101,3 83,8 0.79






4” 100

30 22242 IFHM01080 101,2 90,2 IFHM02050 107,7 90,2 0.97






Finish



Approvals



IE-39

Material


Service


Finish



Approvals



ing ThicknessMax.

Load N


IEFPCPS101100 IEFPCPS101100H4” 100

101 22242 IFHM01350 199,2 167,2 IFHM02300 199,7 167,2 6.55



5” 125

30 8007 IFHM01090 115,4 102,9 IFHM02050 120,4 102,9 1.08









6” 150

30 8007 IFHM01100 129,5 117 IFHM02100 135 117 1.75









8” 200

30 8007 IFHM01125 159,1 144,6 IFHM02100 162,6 144,6 2.29



Finish



Approvals



IE-39

Material


Service


Finish



Approvals



ing ThicknessMax.

Load N



8” 200

60 8007 IFHM01350 206,6 174,6 IFHM02300 207,1 174,6 3.42






10” 250

30 8007 IFHM01150 187,5 171,5 IFHM02100 189,5 171,5 2.29

IEFPCPS040250 IEFPCPS040250H 40 8007 IFHM01350 213,5 181,5 IFHM02300 214 181,5 2.38








12” 300

30 11121 IFHM01200 217 197 IFHM02200 225,5 197 3.31

IEFPCPS040300 IEFPCPS040300H 40 22242 IFHM01400 239 207 IFHM02400 244,5 207 3.33




IEFPCPS100300 IEFPCPS100300H 100 22242 IFHM01600 313 267 IFHM02600 302 267 6.55



Finish



Approvals


Single Pipe Roller

IE-41

Size Range

1” through 30”

Material


Service

Designed to support pipes where axial movements are allowed, and vertical adjustments are required. This combination can also be used over the pipes as a guide. Hanger Rod and Nuts not included.

Ordering

Specify pipe roll size, figure number, name and finish

Finish



Approvals




AB C H Max. Recom.

Weight (per 100)

Inch mm mm mm mm Load KN Kg

IEFPRS025 IEFPRS025H 1” (25) M10 76,0 38,0 27,0 2,7 51,3

IEFPRS032 IEFPRS032H 1 1/4” (32) M10 86,0 47,5 32,0 2,7 53,1

IEFPRS040 IEFPRS040H 1 1/2” (40) M10 92,0 54,0 35,0 2,7 54,5

IEFPRS050 IEFPRS050H 2” (50) M10 105,0 66,7 41,3 2,7 56,8

IEFPRS065 IEFPRS065H 2 1/2” (65) M12 124,0 79,4 49,2 2,9 104,0

IEFPRS080 IEFPRS080H 3” (80) M12 140,0 95,2 57,2 3,1 109,9

IEFPRS090 IEFPRS090H 3 1/2” (90) M12 155,5 107,9 65,0 3,3 122,1

IEFPRS100 IEFPRS100H 4” (100) M16 171,5 120,6 71,5 3,3 170,3

IEFPRS125 IEFPRS125H 5” (125) M16 205,0 147,6 87,5 3,3 212,9

IEFPRS150 IEFPRS150H 6” (150) M20 243,0 174,6 101,5 4,8 343,7

IEFPRS200 IEFPRS200H 8” (200) M24 303,0 225,4 130,2 6,0 499,9

IEFPRS250 IEFPRS250H 10” (250) M24 357,0 279,4 162,0 7,7 623,8

IEFPRS300 IEFPRS300H 12” (300) M24 401,5 330,2 189,0 10,7 878,9

IEFPRS350 IEFPRS350H 14” (350) M24 451,0 361,9 213,0 14,0 1414,7

IEFPRS400 IEFPRS400H 16” (400) M30 502,0 412,7 240,0 17,7 1927,2

IEFPRS450 IEFPRS450H 18” (450) M30 555,5 463,5 267,0 18,7 2113,4

IEFPRS500 IEFPRS500H 20” (500) M30 616,0 514,3 295,3 20,3 3006,8

IEFPRS600 IEFPRS600H 24” (600) M36 727,0 615,9 355,5 27,5 4654,4

IEFPRS750 IEFPRS750H 30” (750) M42 902,0 768,3 443,0 32,5 8481,2

Ordering

Finish



Approvals



Heavy Duty Riser Clamp

IE-42

Size Range

2” through 24”

Material


Service

Designed todesigned for pipe lines where horizontal movement may take place due to expansion and contraction. Vertical adjustments are possible once the pipe is in place.The lower nut is used to adjust the pipeline to the required elevation.

Ordering


Finish



Approvals



AL Max. Recom.

Inch mm mm Load KN

IEKHDRC050 IEKHDRC050H 2” (50) M12 559,0 3,0

IEKHDRC065 IEKHDRC065H 2 1/2” (65) M12 610,0 3,0


IEKHDRC090 IEKHDRC090H 3 1/2” (90) M16 610,0 6,0












Ordering

Finish



Approvals


Adjustable Roller Hanger

IE-43

Size Range

2” through 24”

Material


Service

Designed for pipe lines where horizontal movement may take place due to expansion and contraction. Vertical adjustments are possible once the pipe is in place.The lower nut is used to adjust the pipeline to the required elevation.

Ordering


Finish



Approvals




A SxBC D E

FG H

Max. Recom.

Weight (per 100)

Inch mm mm mm mm mm mm Load KN Kg

IEFRH050 IEFRH050H 2” (50) M12 5x25 73,0 40,0 60,0 M12 120,0 41,0 0,7 54,0

IEFRH065 IEFRH065H 2 1/2” (65) M12 5x25 83,0 49,0 73,0 M12 146,0 43,0 1,0 77,0

IEFRH080 IEFRH080H 3” (80) M12 6x25 98,0 57,0 79,0 M12 162,0 41,0 1,4 100,0

IEFRH090 IEFRH090H 3 1/2” (90) M16 6x30 111,0 65,0 89,0 M12 178,0 43,0 1,7 114,0

IEFRH100 IEFRH100H 4” (100) M16 6x40 125,0 71,0 92,0 M12 192,0 41,0 2,0 145,0

IEFRH125 IEFRH125H 5” (125) M20 10x45 152,0 87,0 114,0 M16 232,0 49,0 3,0 284,0

IEFRH150 IEFRH150H 6” (150) M20 10x50 181,0 102,0 127,0 M20 262,0 48,0 3,5 420,0

IEFRH200 IEFRH200H 8” (200) M20 10x60 235,0 130,0 156,0 M24 322,0 51,0 3,5 660,0

IEFRH250 IEFRH250H 10” (250) M24 10x60 286,0 162,0 184,0 M24 382,5 52,0 4,3 853,0

IEFRH300 IEFRH300H 12” (300) M24 12x60 337,0 189,0 213,0 M24 443,0 57,0 5,3 1260,0

IEFRH350 IEFRH350H 14” (350) M24 12x60 368,0 213,0 222,0 M30 479,5 51,0 5,3 1776,0

IEFRH400 IEFRH400H 16” (400) M24 12x60 419,0 238,0 246,0 M30 528,5 49,0 5,3 2226,0

IEFRH450 IEFRH450H 18” (450) M30 12x75 470,0 265,0 291,0 M30 603,0 68,0 6,2 2624,0

IEFRH500 IEFRH500H 20” (500) M30 16x75 521,0 295,0 311,0 M36 660,5 64,0 7,0 3445,0

IEFRH600 IEFRH600H 24” (600) M30 16x75 626,0 350,0 381,0 M36 800,0 89,0 8,0 4990,0

Ordering

Finish



Approvals



Pipe Roll Complete (Roller Stand)

IE-44

Size Range

2” through 60”

Material


Service

Designed to support pipes where axial movements are allowed. Used where vertical adjustments are not necessary.

Ordering


Finish



Approvals



Code No Code No for HDGSize A B C D E F G H I

Max. Recom.

Weight (per 100)

Inch mm mm mm mm mm mm mm mm mm Load KN Kg

IEFRSS050 IEFRSS050H 2”-3 1/2” 87,0 102,0 214,0 140,0 75,0 38,0 12,5 13,0 25,0 3,4 290,0

IEFRSS100 IEFRSS100H 4”-6” 119,0 108,0 252,0 152,0 100,0 45,0 12,5 13,0 25,0 8,4 400,0

IEFRSS200 IEFRSS200H 8”-10” 178,0 127,0 216,0 203,0 158,0 76,0 21,0 17,0 25,0 18,8 897,0

IEFRSS300 IEFRSS300H 12”-14” 230,0 152,0 281,0 203,0 208,0 82,0 25,0 17,0 25,0 27,4 1525,0

IEFRSS400 IEFRSS400H 16”-20” 260,0 165,0 330,0 229,0 234,0 95,0 31,0 21,0 25,0 44,0 2125,0

IEFRSS600 IEFRSS600H 24” 289,0 165,0 340,0 229,0 259,0 98,0 31,0 21,0 25,0 54,0 2175,0

IEFRSS750 IEFRSS750H 30” 362,0 203,0 432,0 279,0 323,0 117,0 40,0 25,0 25,0 66,8 3812,0

IEFRSS900 IEFRSS900H 36”-42” 432,0 229,0 508,0 305,0 383,0 127,0 54,0 32,0 32,0 106,8 6816,0

IEFRSS1200 IEFRSS1200H 44”-48” 510,0 250,0 600,0 350,0 430,0 130,0 54,0 41,0 32,0 131,0 9270,0

IEFRSS1400 IEFRSS1400H 56”-60” 590,0 300,0 700,0 400,0 490,0 160,0 58,0 41,0 32,0 149,0 13317,0

Finish



Approvals



Roller Chair

IE-44A

Size Range

2” through 24”

Material


Service


Ordering


Finish



Approvals




SizeA

CD

E F G H Max. Recom. Weight (per 100)

Inch mm mm mm mm mm mm Load KN Kg

IEFRC050 IEFRC050H 2” (50) M10 38 M10 30 98,5 39,5 78 1,3 50

IEFRC065 IEFRC065H 2 1/2” (65) M10 41 M12 30 120,5 47,5 88,5 2,7 62

IEFRC080 IEFRC080H 3” (80) M10 44,5 M12 50 140 55,5 100 2,7 74,5

IEFRC090 IEFRC090H 3 1/2” (90) M12 51 M12 50 152,5 63,5 114,5 2,7 113,5

IEFRC100 IEFRC100H 4” (100) M12 59 M12 50 165 70 129 3,1 138,5

IEFRC125 IEFRC125H 5” (125) M12 63,5 M16 60 200 86 149 3,1 194,5

IEFRC150 IEFRC150H 6” (150) M12 70 M20 82,5 241,5 100 170 4,4 243

IEFRC200 IEFRC200H 8” (200) M12 76,5 M24 101,5 298,5 128,5 205 5,8 313,5

IEFRC250 IEFRC250H 10” (250) M12 92 M24 127 362 159 251 7,6 573,5

IEFRC300 IEFRC300H 12” (300) M12 105 M24 152,5 419 187,5 292,5 10,2 935

IEFRC350 IEFRC350H 14” (350) M16 120,5 M30 178 473 209,5 330 13,8 1217

IEFRC400 IEFRC400H 16” (400) M16 127 M30 203 533,5 235 362 17,4 2077

IEFRC450 IEFRC450H 18” (450) M16 133,5 M30 228,5 581 263,5 397 18,7 2134

IEFRC500 IEFRC500H 20” (500) M20 146 M36 254 648 292 438 20,0 2814

IEFRC600 IEFRC600H 24” (600) M20 178 M36 305 762 351 528,5 26,7 4535

Finish



Approvals



Pipe Roll And Base Plate

IE-45

Size Range

2” through 60”

Material


Service


Ordering


Finish



Approvals



Code No Code No for HDGSize A B C Max. Recom.

inch mm mm mm Load KN

IEFPRPS050 IEFPRPS050H 2” - 3 1/2” 75,0 70,0 20,0 3,4

IEFPRPS100 IEFPRPS100H 4” - 6” 100,0 95,0 26,0 8,4




IEFPRPS600 IEFPRPS600H 24” 259,0 254,0 72,0 54,0





Finish



Approvals



Adjustable Roller Stand

IE-46

Size Range

2” through 60”

Material


Service

Designed for support of pipe with longitudunal movement and vertical adjustment are required.

Ordering


Finish



Approvals


Note: Special sizes can be designed to meet Project require-ments.

Code No Code No for HDGSize A B Max. Recom.

inch mm mm Load KN

IEFARSS050 IEFARSS050H 2” - 3 1/2” 264,0 190,0 3,4

IEFARSS100 IEFARSS100H 4” - 6” 302,0 202,0 8,4




IEFARSS600 IEFARSS600H 24” 390,0 279,0 54,0





Finish



Approvals



Plate Lug

IE-57

Material


Service

Designed for attaching to steel beams if flexibility at beam is required.

Ordering


Finish



Approvals


Code NoShort-HDG Long Long-HDG

Ø D H R T W Max. Recom.

Short mm Short Long mm mm mm Load KN

IEFSWLS006 IEFSWLS006H IEFSWLL006 IEFSWLL006H 17,0 40,0 76,0 32,0 6 64,0 6,0










Finish



Approvals


Polyurethane Insulation Block

IE-60

Material

Polyurethane

Service

Designed to use for a wide range of hot and cold piping applications.

Its high heat resistance properties allow a service temperature range

from -150°C to +130°C. Its light weight, easy application and low ther-

mal conductivity provides high insulating efficiency and top insulation

throughout the temperature range.

Technical Properties

Density: 80 kg/m3 - 250 kg/m3

Temperature Resistance: -150°C / +130°C

Note

Protection band can be added upon request (IFITA.. >> IFITB..)

Standard length is 100mm

Various thickness and length options upon request

Size Total OD (mm)

T= 13mm

Code NoTotal OD

(mm) T= 20mm

Code NoTotal OD

(mm) T= 25mm

Code NoTotal OD

(mm) T= 30mm

Code NoInch DN OD

1/2” (15) 21,3 47,3 IFITA01513100 61,3 IFITA01520100 71,3 IFITA01525100 81,3 IFITA01530100


1” (25) 33,7 59,7 IFITA02513100 73,7 IFITA02520100 83,7 IFITA02525100 93,7 IFITA02530100

1 1/4” (32) 42,4 68,4 IFITA03213100 82,4 IFITA03220100 92,4 IFITA03225100 102,4 IFITA03230100



















Polyurethane Insulation Block

Material

Polyurethane

Service

Designed to use for a wide range of hot and cold piping applications.

Its high heat resistance properties allow a service temperature range

from -150°C to +130°C. Its light weight, easy application and low ther-

mal conductivity provides high insulating efficiency and top insulation

throughout the temperature range.


Density: 80 kg/m3 - 250 kg/m3

Temperature Resistance: -150°C / +130°C

Note

Protection band can be added upon request (IFITA.. >> IFITB..)



Size Total OD (mm)

T= 40 mm

Code NoTotal OD

(mm) T= 50 mm

Code NoTotal OD

(mm) T= 65 mm

Code NoTotal OD

(mm) T= 75 mm

Code NoInch DN OD























IE-60

Calcium Silicate Insulation Block

Material

Calcium Silicate

Service

Designed for a maximum service temperature of 1000°C. This allows

the use in a wide range of piping applications as a sound and thermal

insulation. Calcium Silicate’s light weight, very low thermal conductivity

and excellent mechanical strength provides a top insulation throughout

the temperature range.


Density: Max. 240 kg/m3 acc. to ASTM C303-10

Temperature Resistance: ≤ 1000 °C

Compressive Strength: Minimum 690 kPa acc. to ASTM C165-07

Thermal Conductivity: Maximum 0,065 W/(m.K) acc. To ASTM C177-10

Approvals

Complies with ASTM C533 Type I

Note



IE-61

Size Total OD (mm)

T= 13mmCode No

Total OD (mm)

T= 20mmCode No

Total OD (mm)

T= 25mmCode No

Total OD (mm)

T= 30mmCode No

Inch DN OD

1/2” (15) 21,3 47,3 IFITC01513100 61,3 IFITC01520100 71,3 IFITC01525100 81,3 IFITC01530100


1” (25) 33,7 59,7 IFITC02513100 73,7 IFITC02520100 83,7 IFITC02525100 93,7 IFITC02530100

1 1/4” (32) 42,4 68,4 IFITC03213100 82,4 IFITC03220100 92,4 IFITC03225100 102,4 IFITC03230100



















Calcium Silicate Insulation Block

Material

Calcium Silicate

Service

Designed for a maximum service temperature of 1000°C. This allows

the use in a wide range of piping applications as a sound and thermal

insulation. Calcium Silicate’s light weight, very low thermal conductivity

and excellent mechanical strength provides a top insulation throughout

the temperature range.


Density: Max. 240 kg/m3 acc. to ASTM C303-10

Temperature Resistance: ≤ 1000 °C

Compressive Strength: Minimum 690 kPa acc. to ASTM C165-07

Thermal Conductivity: Maximum 0,065 W/(m.K) acc. To ASTM C177-10

Approvals

Complies with ASTM C533 Type I

Note



IE-61

Size Total OD (mm)

T= 40 mmCode No

Total OD (mm)

T= 50 mmCode No

Total OD (mm)

T= 65 mmCode No

Total OD (mm)

T= 75 mmCode No

Inch DN OD























mss industrial products catalogue

Documents